/* | |
* BSD LICENSE | |
* | |
* Copyright(c) 2016-2017 Broadcom. All rights reserved. | |
* | |
* Redistribution and use in source and binary forms, with or without | |
* modification, are permitted provided that the following conditions | |
* are met: | |
* | |
* * Redistributions of source code must retain the above copyright | |
* notice, this list of conditions and the following disclaimer. | |
* * Redistributions in binary form must reproduce the above copyright | |
* notice, this list of conditions and the following disclaimer in | |
* the documentation and/or other materials provided with the | |
* distribution. | |
* * Neither the name of Broadcom nor the names of its | |
* contributors may be used to endorse or promote products derived | |
* from this software without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
*/ | |
sata { | |
compatible = "simple-bus"; | |
#address-cells = <1>; | |
#size-cells = <1>; | |
ranges = <0x0 0x0 0x67d00000 0x00800000>; | |
sata0: ahci@210000 { | |
compatible = "brcm,iproc-ahci", "generic-ahci"; | |
reg = <0x00210000 0x1000>; | |
reg-names = "ahci"; | |
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata0_port0: sata-port@0 { | |
reg = <0>; | |
phys = <&sata0_phy0>; | |
phy-names = "sata-phy"; | |
}; | |
}; | |
sata_phy0: sata_phy@212100 { | |
compatible = "brcm,iproc-sr-sata-phy"; | |
reg = <0x00212100 0x1000>; | |
reg-names = "phy"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata0_phy0: sata-phy@0 { | |
reg = <0>; | |
#phy-cells = <0>; | |
}; | |
}; | |
sata1: ahci@310000 { | |
compatible = "brcm,iproc-ahci", "generic-ahci"; | |
reg = <0x00310000 0x1000>; | |
reg-names = "ahci"; | |
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata1_port0: sata-port@0 { | |
reg = <0>; | |
phys = <&sata1_phy0>; | |
phy-names = "sata-phy"; | |
}; | |
}; | |
sata_phy1: sata_phy@312100 { | |
compatible = "brcm,iproc-sr-sata-phy"; | |
reg = <0x00312100 0x1000>; | |
reg-names = "phy"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata1_phy0: sata-phy@0 { | |
reg = <0>; | |
#phy-cells = <0>; | |
}; | |
}; | |
sata2: ahci@120000 { | |
compatible = "brcm,iproc-ahci", "generic-ahci"; | |
reg = <0x00120000 0x1000>; | |
reg-names = "ahci"; | |
interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata2_port0: sata-port@0 { | |
reg = <0>; | |
phys = <&sata2_phy0>; | |
phy-names = "sata-phy"; | |
}; | |
}; | |
sata_phy2: sata_phy@122100 { | |
compatible = "brcm,iproc-sr-sata-phy"; | |
reg = <0x00122100 0x1000>; | |
reg-names = "phy"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata2_phy0: sata-phy@0 { | |
reg = <0>; | |
#phy-cells = <0>; | |
}; | |
}; | |
sata3: ahci@130000 { | |
compatible = "brcm,iproc-ahci", "generic-ahci"; | |
reg = <0x00130000 0x1000>; | |
reg-names = "ahci"; | |
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata3_port0: sata-port@0 { | |
reg = <0>; | |
phys = <&sata3_phy0>; | |
phy-names = "sata-phy"; | |
}; | |
}; | |
sata_phy3: sata_phy@132100 { | |
compatible = "brcm,iproc-sr-sata-phy"; | |
reg = <0x00132100 0x1000>; | |
reg-names = "phy"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata3_phy0: sata-phy@0 { | |
reg = <0>; | |
#phy-cells = <0>; | |
}; | |
}; | |
sata4: ahci@330000 { | |
compatible = "brcm,iproc-ahci", "generic-ahci"; | |
reg = <0x00330000 0x1000>; | |
reg-names = "ahci"; | |
interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata4_port0: sata-port@0 { | |
reg = <0>; | |
phys = <&sata4_phy0>; | |
phy-names = "sata-phy"; | |
}; | |
}; | |
sata_phy4: sata_phy@332100 { | |
compatible = "brcm,iproc-sr-sata-phy"; | |
reg = <0x00332100 0x1000>; | |
reg-names = "phy"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata4_phy0: sata-phy@0 { | |
reg = <0>; | |
#phy-cells = <0>; | |
}; | |
}; | |
sata5: ahci@400000 { | |
compatible = "brcm,iproc-ahci", "generic-ahci"; | |
reg = <0x00400000 0x1000>; | |
reg-names = "ahci"; | |
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata5_port0: sata-port@0 { | |
reg = <0>; | |
phys = <&sata5_phy0>; | |
phy-names = "sata-phy"; | |
}; | |
}; | |
sata_phy5: sata_phy@402100 { | |
compatible = "brcm,iproc-sr-sata-phy"; | |
reg = <0x00402100 0x1000>; | |
reg-names = "phy"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata5_phy0: sata-phy@0 { | |
reg = <0>; | |
#phy-cells = <0>; | |
}; | |
}; | |
sata6: ahci@410000 { | |
compatible = "brcm,iproc-ahci", "generic-ahci"; | |
reg = <0x00410000 0x1000>; | |
reg-names = "ahci"; | |
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata6_port0: sata-port@0 { | |
reg = <0>; | |
phys = <&sata6_phy0>; | |
phy-names = "sata-phy"; | |
}; | |
}; | |
sata_phy6: sata_phy@412100 { | |
compatible = "brcm,iproc-sr-sata-phy"; | |
reg = <0x00412100 0x1000>; | |
reg-names = "phy"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata6_phy0: sata-phy@0 { | |
reg = <0>; | |
#phy-cells = <0>; | |
}; | |
}; | |
sata7: ahci@420000 { | |
compatible = "brcm,iproc-ahci", "generic-ahci"; | |
reg = <0x00420000 0x1000>; | |
reg-names = "ahci"; | |
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata7_port0: sata-port@0 { | |
reg = <0>; | |
phys = <&sata7_phy0>; | |
phy-names = "sata-phy"; | |
}; | |
}; | |
sata_phy7: sata_phy@422100 { | |
compatible = "brcm,iproc-sr-sata-phy"; | |
reg = <0x00422100 0x1000>; | |
reg-names = "phy"; | |
#address-cells = <1>; | |
#size-cells = <0>; | |
status = "disabled"; | |
sata7_phy0: sata-phy@0 { | |
reg = <0>; | |
#phy-cells = <0>; | |
}; | |
}; | |
}; |