drm/i915/crt: Introduce struct intel_crt
We will use this structure in future patches to store CRT specific
information on the encoder.
Split out and tweaked from a patch by Keith Packard.
Signed-off-by: Keith Packard <keithp@kithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index c55c770..e38bc67 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -34,6 +34,16 @@
#include "i915_drm.h"
#include "i915_drv.h"
+struct intel_crt {
+ struct intel_encoder base;
+};
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+ return container_of(intel_attached_encoder(connector),
+ struct intel_crt, base);
+}
+
static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
@@ -277,13 +287,12 @@
return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
}
-static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
+static bool intel_crt_detect_ddc(struct intel_crt *crt)
{
- struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
- struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+ struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
/* CRT should always be at 0, but check anyway */
- if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
+ if (crt->base.type != INTEL_OUTPUT_ANALOG)
return false;
if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) {
@@ -291,7 +300,7 @@
return true;
}
- if (intel_ddc_probe(intel_encoder, dev_priv->crt_ddc_pin)) {
+ if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
return true;
}
@@ -300,9 +309,9 @@
}
static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_crt *crt)
{
- struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_encoder *encoder = &crt->base.base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -434,7 +443,7 @@
intel_crt_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
- struct intel_encoder *encoder = intel_attached_encoder(connector);
+ struct intel_crt *crt = intel_attached_crt(connector);
struct drm_crtc *crtc;
int dpms_mode;
enum drm_connector_status status;
@@ -447,24 +456,25 @@
return connector_status_disconnected;
}
- if (intel_crt_detect_ddc(&encoder->base))
+ if (intel_crt_detect_ddc(crt))
return connector_status_connected;
if (!force)
return connector->status;
/* for pre-945g platforms use load detect */
- if (encoder->base.crtc && encoder->base.crtc->enabled) {
- status = intel_crt_load_detect(encoder->base.crtc, encoder);
+ crtc = crt->base.base.crtc;
+ if (crtc && crtc->enabled) {
+ status = intel_crt_load_detect(crtc, crt);
} else {
- crtc = intel_get_load_detect_pipe(encoder, connector,
+ crtc = intel_get_load_detect_pipe(&crt->base, connector,
NULL, &dpms_mode);
if (crtc) {
- if (intel_crt_detect_ddc(&encoder->base))
+ if (intel_crt_detect_ddc(crt))
status = connector_status_connected;
else
- status = intel_crt_load_detect(crtc, encoder);
- intel_release_load_detect_pipe(encoder,
+ status = intel_crt_load_detect(crtc, crt);
+ intel_release_load_detect_pipe(&crt->base,
connector, dpms_mode);
} else
status = connector_status_unknown;
@@ -536,17 +546,17 @@
void intel_crt_init(struct drm_device *dev)
{
struct drm_connector *connector;
- struct intel_encoder *intel_encoder;
+ struct intel_crt *crt;
struct intel_connector *intel_connector;
struct drm_i915_private *dev_priv = dev->dev_private;
- intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
- if (!intel_encoder)
+ crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+ if (!crt)
return;
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!intel_connector) {
- kfree(intel_encoder);
+ kfree(crt);
return;
}
@@ -554,20 +564,20 @@
drm_connector_init(dev, &intel_connector->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
- drm_encoder_init(dev, &intel_encoder->base, &intel_crt_enc_funcs,
+ drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
DRM_MODE_ENCODER_DAC);
- intel_connector_attach_encoder(intel_connector, intel_encoder);
+ intel_connector_attach_encoder(intel_connector, &crt->base);
- intel_encoder->type = INTEL_OUTPUT_ANALOG;
- intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
- (1 << INTEL_ANALOG_CLONE_BIT) |
- (1 << INTEL_SDVO_LVDS_CLONE_BIT);
- intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+ crt->base.type = INTEL_OUTPUT_ANALOG;
+ crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
+ 1 << INTEL_ANALOG_CLONE_BIT |
+ 1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ crt->base.crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
- drm_encoder_helper_add(&intel_encoder->base, &intel_crt_helper_funcs);
+ drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);