drivers/net/dsa/mv88e6060.c - kernel/msm-4.19 - Gitiles

 /*
  * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
  * Copyright (c) 2008-2009 Marvell Semiconductor
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */

 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <net/dsa.h>

 #define REG_PORT(p)		(8 + (p))
 #define REG_GLOBAL		0x0f

 static int reg_read(struct dsa_switch *ds, int addr, int reg)
 {
 	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);

 	if (bus == NULL)
 		return -EINVAL;

 	return mdiobus_read_nested(bus, ds->pd->sw_addr + addr, reg);
 }

 #define REG_READ(addr, reg)					\
 	({							\
 		int __ret;					\
 								\
 		__ret = reg_read(ds, addr, reg);		\
 		if (__ret < 0)					\
 			return __ret;				\
 		__ret;						\
 	})


 static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
 {
 	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);

 	if (bus == NULL)
 		return -EINVAL;

 	return mdiobus_write_nested(bus, ds->pd->sw_addr + addr, reg, val);
 }

 #define REG_WRITE(addr, reg, val)				\
 	({							\
 		int __ret;					\
 								\
 		__ret = reg_write(ds, addr, reg, val);		\
 		if (__ret < 0)					\
 			return __ret;				\
 	})

 static char *mv88e6060_probe(struct device *host_dev, int sw_addr)
 {
 	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
 	int ret;

 	if (bus == NULL)
 		return NULL;

 	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
 	if (ret >= 0) {
 		if (ret == 0x0600)
 			return "Marvell 88E6060 (A0)";
 		if (ret == 0x0601 || ret == 0x0602)
 			return "Marvell 88E6060 (B0)";
 		if ((ret & 0xfff0) == 0x0600)
 			return "Marvell 88E6060";
 	}

 	return NULL;
 }

 static int mv88e6060_switch_reset(struct dsa_switch *ds)
 {
 	int i;
 	int ret;
 	unsigned long timeout;

 	/* Set all ports to the disabled state. */
 	for (i = 0; i < 6; i++) {
 		ret = REG_READ(REG_PORT(i), 0x04);
 		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
 	}

 	/* Wait for transmit queues to drain. */
 	usleep_range(2000, 4000);

 	/* Reset the switch. */
 	REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);

 	/* Wait up to one second for reset to complete. */
 	timeout = jiffies + 1 * HZ;
 	while (time_before(jiffies, timeout)) {
 		ret = REG_READ(REG_GLOBAL, 0x00);
 		if ((ret & 0x8000) == 0x0000)
 			break;

 		usleep_range(1000, 2000);
 	}
 	if (time_after(jiffies, timeout))
 		return -ETIMEDOUT;

 	return 0;
 }

 static int mv88e6060_setup_global(struct dsa_switch *ds)
 {
 	/* Disable discarding of frames with excessive collisions,
 	 * set the maximum frame size to 1536 bytes, and mask all
 	 * interrupt sources.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x04, 0x0800);

 	/* Enable automatic address learning, set the address
 	 * database size to 1024 entries, and set the default aging
 	 * time to 5 minutes.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);

 	return 0;
 }

 static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
 {
 	int addr = REG_PORT(p);

 	/* Do not force flow control, disable Ingress and Egress
 	 * Header tagging, disable VLAN tunneling, and set the port
 	 * state to Forwarding.  Additionally, if this is the CPU
 	 * port, enable Ingress and Egress Trailer tagging mode.
 	 */
 	REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);

 	/* Port based VLAN map: give each port its own address
 	 * database, allow the CPU port to talk to each of the 'real'
 	 * ports, and allow each of the 'real' ports to only talk to
 	 * the CPU port.
 	 */
 	REG_WRITE(addr, 0x06,
 			((p & 0xf) << 12) |
 			 (dsa_is_cpu_port(ds, p) ?
 				ds->phys_port_mask :
 				(1 << ds->dst->cpu_port)));

 	/* Port Association Vector: when learning source addresses
 	 * of packets, add the address to the address database using
 	 * a port bitmap that has only the bit for this port set and
 	 * the other bits clear.
 	 */
 	REG_WRITE(addr, 0x0b, 1 << p);

 	return 0;
 }

 static int mv88e6060_setup(struct dsa_switch *ds)
 {
 	int i;
 	int ret;

 	ret = mv88e6060_switch_reset(ds);
 	if (ret < 0)
 		return ret;

 	/* @@@ initialise atu */

 	ret = mv88e6060_setup_global(ds);
 	if (ret < 0)
 		return ret;

 	for (i = 0; i < 6; i++) {
 		ret = mv88e6060_setup_port(ds, i);
 		if (ret < 0)
 			return ret;
 	}

 	return 0;
 }

 static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
 {
 	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
 	REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
 	REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);

 	return 0;
 }

 static int mv88e6060_port_to_phy_addr(int port)
 {
 	if (port >= 0 && port <= 5)
 		return port;
 	return -1;
 }

 static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
 {
 	int addr;

 	addr = mv88e6060_port_to_phy_addr(port);
 	if (addr == -1)
 		return 0xffff;

 	return reg_read(ds, addr, regnum);
 }

 static int
 mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
 {
 	int addr;

 	addr = mv88e6060_port_to_phy_addr(port);
 	if (addr == -1)
 		return 0xffff;

 	return reg_write(ds, addr, regnum, val);
 }

 static void mv88e6060_poll_link(struct dsa_switch *ds)
 {
 	int i;

 	for (i = 0; i < DSA_MAX_PORTS; i++) {
 		struct net_device *dev;
 		int uninitialized_var(port_status);
 		int link;
 		int speed;
 		int duplex;
 		int fc;

 		dev = ds->ports[i];
 		if (dev == NULL)
 			continue;

 		link = 0;
 		if (dev->flags & IFF_UP) {
 			port_status = reg_read(ds, REG_PORT(i), 0x00);
 			if (port_status < 0)
 				continue;

 			link = !!(port_status & 0x1000);
 		}

 		if (!link) {
 			if (netif_carrier_ok(dev)) {
 				netdev_info(dev, "link down\n");
 				netif_carrier_off(dev);
 			}
 			continue;
 		}

 		speed = (port_status & 0x0100) ? 100 : 10;
 		duplex = (port_status & 0x0200) ? 1 : 0;
 		fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;

 		if (!netif_carrier_ok(dev)) {
 			netdev_info(dev,
 				    "link up, %d Mb/s, %s duplex, flow control %sabled\n",
 				    speed,
 				    duplex ? "full" : "half",
 				    fc ? "en" : "dis");
 			netif_carrier_on(dev);
 		}
 	}
 }

 static struct dsa_switch_driver mv88e6060_switch_driver = {
 	.tag_protocol	= DSA_TAG_PROTO_TRAILER,
 	.probe		= mv88e6060_probe,
 	.setup		= mv88e6060_setup,
 	.set_addr	= mv88e6060_set_addr,
 	.phy_read	= mv88e6060_phy_read,
 	.phy_write	= mv88e6060_phy_write,
 	.poll_link	= mv88e6060_poll_link,
 };

 static int __init mv88e6060_init(void)
 {
 	register_switch_driver(&mv88e6060_switch_driver);
 	return 0;
 }
 module_init(mv88e6060_init);

 static void __exit mv88e6060_cleanup(void)
 {
 	unregister_switch_driver(&mv88e6060_switch_driver);
 }
 module_exit(mv88e6060_cleanup);

 MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
 MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:mv88e6060");
	/*
	* net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
	* Copyright (c) 2008-2009 Marvell Semiconductor
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*/

	#include <linux/delay.h>
	#include <linux/jiffies.h>
	#include <linux/list.h>
	#include <linux/module.h>
	#include <linux/netdevice.h>
	#include <linux/phy.h>
	#include <net/dsa.h>

	#define REG_PORT(p) (8 + (p))
	#define REG_GLOBAL 0x0f

	static int reg_read(struct dsa_switch *ds, int addr, int reg)
	{
	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);

	if (bus == NULL)
	return -EINVAL;

	return mdiobus_read_nested(bus, ds->pd->sw_addr + addr, reg);
	}

	#define REG_READ(addr, reg) \
	({ \
	int __ret; \
	\
	__ret = reg_read(ds, addr, reg); \
	if (__ret < 0) \
	return __ret; \
	__ret; \
	})


	static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
	{
	struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);

	if (bus == NULL)
	return -EINVAL;

	return mdiobus_write_nested(bus, ds->pd->sw_addr + addr, reg, val);
	}

	#define REG_WRITE(addr, reg, val) \
	({ \
	int __ret; \
	\
	__ret = reg_write(ds, addr, reg, val); \
	if (__ret < 0) \
	return __ret; \
	})

	static char mv88e6060_probe(struct device host_dev, int sw_addr)
	{
	struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
	int ret;

	if (bus == NULL)
	return NULL;

	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
	if (ret >= 0) {
	if (ret == 0x0600)
	return "Marvell 88E6060 (A0)";
	if (ret == 0x0601 \|\| ret == 0x0602)
	return "Marvell 88E6060 (B0)";
	if ((ret & 0xfff0) == 0x0600)
	return "Marvell 88E6060";
	}

	return NULL;
	}

	static int mv88e6060_switch_reset(struct dsa_switch *ds)
	{
	int i;
	int ret;
	unsigned long timeout;

	/* Set all ports to the disabled state. */
	for (i = 0; i < 6; i++) {
	ret = REG_READ(REG_PORT(i), 0x04);
	REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
	}

	/* Wait for transmit queues to drain. */
	usleep_range(2000, 4000);

	/* Reset the switch. */
	REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);

	/* Wait up to one second for reset to complete. */
	timeout = jiffies + 1 * HZ;
	while (time_before(jiffies, timeout)) {
	ret = REG_READ(REG_GLOBAL, 0x00);
	if ((ret & 0x8000) == 0x0000)
	break;

	usleep_range(1000, 2000);
	}
	if (time_after(jiffies, timeout))
	return -ETIMEDOUT;

	return 0;
	}

	static int mv88e6060_setup_global(struct dsa_switch *ds)
	{
	/* Disable discarding of frames with excessive collisions,
	* set the maximum frame size to 1536 bytes, and mask all
	* interrupt sources.
	*/
	REG_WRITE(REG_GLOBAL, 0x04, 0x0800);

	/* Enable automatic address learning, set the address
	* database size to 1024 entries, and set the default aging
	* time to 5 minutes.
	*/
	REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);

	return 0;
	}

	static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
	{
	int addr = REG_PORT(p);

	/* Do not force flow control, disable Ingress and Egress
	* Header tagging, disable VLAN tunneling, and set the port
	* state to Forwarding. Additionally, if this is the CPU
	* port, enable Ingress and Egress Trailer tagging mode.
	*/
	REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);

	/* Port based VLAN map: give each port its own address
	* database, allow the CPU port to talk to each of the 'real'
	* ports, and allow each of the 'real' ports to only talk to
	* the CPU port.
	*/
	REG_WRITE(addr, 0x06,
	((p & 0xf) << 12) \|
	(dsa_is_cpu_port(ds, p) ?
	ds->phys_port_mask :
	(1 << ds->dst->cpu_port)));

	/* Port Association Vector: when learning source addresses
	* of packets, add the address to the address database using
	* a port bitmap that has only the bit for this port set and
	* the other bits clear.
	*/
	REG_WRITE(addr, 0x0b, 1 << p);

	return 0;
	}

	static int mv88e6060_setup(struct dsa_switch *ds)
	{
	int i;
	int ret;

	ret = mv88e6060_switch_reset(ds);
	if (ret < 0)
	return ret;

	/* @@@ initialise atu */

	ret = mv88e6060_setup_global(ds);
	if (ret < 0)
	return ret;

	for (i = 0; i < 6; i++) {
	ret = mv88e6060_setup_port(ds, i);
	if (ret < 0)
	return ret;
	}

	return 0;
	}

	static int mv88e6060_set_addr(struct dsa_switch ds, u8 addr)
	{
	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) \| addr[1]);
	REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) \| addr[3]);
	REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) \| addr[5]);

	return 0;
	}

	static int mv88e6060_port_to_phy_addr(int port)
	{
	if (port >= 0 && port <= 5)
	return port;
	return -1;
	}

	static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
	{
	int addr;

	addr = mv88e6060_port_to_phy_addr(port);
	if (addr == -1)
	return 0xffff;

	return reg_read(ds, addr, regnum);
	}

	static int
	mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
	{
	int addr;

	addr = mv88e6060_port_to_phy_addr(port);
	if (addr == -1)
	return 0xffff;

	return reg_write(ds, addr, regnum, val);
	}

	static void mv88e6060_poll_link(struct dsa_switch *ds)
	{
	int i;

	for (i = 0; i < DSA_MAX_PORTS; i++) {
	struct net_device *dev;
	int uninitialized_var(port_status);
	int link;
	int speed;
	int duplex;
	int fc;

	dev = ds->ports[i];
	if (dev == NULL)
	continue;

	link = 0;
	if (dev->flags & IFF_UP) {
	port_status = reg_read(ds, REG_PORT(i), 0x00);
	if (port_status < 0)
	continue;

	link = !!(port_status & 0x1000);
	}

	if (!link) {
	if (netif_carrier_ok(dev)) {
	netdev_info(dev, "link down\n");
	netif_carrier_off(dev);
	}
	continue;
	}

	speed = (port_status & 0x0100) ? 100 : 10;
	duplex = (port_status & 0x0200) ? 1 : 0;
	fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;

	if (!netif_carrier_ok(dev)) {
	netdev_info(dev,
	"link up, %d Mb/s, %s duplex, flow control %sabled\n",
	speed,
	duplex ? "full" : "half",
	fc ? "en" : "dis");
	netif_carrier_on(dev);
	}
	}
	}

	static struct dsa_switch_driver mv88e6060_switch_driver = {
	.tag_protocol = DSA_TAG_PROTO_TRAILER,
	.probe = mv88e6060_probe,
	.setup = mv88e6060_setup,
	.set_addr = mv88e6060_set_addr,
	.phy_read = mv88e6060_phy_read,
	.phy_write = mv88e6060_phy_write,
	.poll_link = mv88e6060_poll_link,
	};

	static int __init mv88e6060_init(void)
	{
	register_switch_driver(&mv88e6060_switch_driver);
	return 0;
	}
	module_init(mv88e6060_init);

	static void __exit mv88e6060_cleanup(void)
	{
	unregister_switch_driver(&mv88e6060_switch_driver);
	}
	module_exit(mv88e6060_cleanup);

	MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
	MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("platform:mv88e6060");