ARM: dts: tango4: Initial device trees
This device tree was tested on a Sigma Designs SMP8758 Vantage-1172
Rev E1 development board.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c1ac5f2..c34dcbd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -693,6 +693,8 @@
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_ARCH_TANGO) += \
+ tango4-vantage-1172.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-harmony.dtb \
tegra20-iris-512.dtb \
diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi
new file mode 100644
index 0000000..ef665d2
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-common.dtsi
@@ -0,0 +1,130 @@
+/*
+ * Based on Mans Rullgard's Tango3 DT
+ * https://github.com/mansr/linux-tangox
+ */
+
+#define CPU_CLK 0
+#define SYS_CLK 1
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ periph_clk: periph_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&clkgen CPU_CLK>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ #clock-cells = <0>;
+ };
+
+ mpcore {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x20000000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scu@0 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x0 0x100>;
+ };
+
+ twd@600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x600 0x10>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&periph_clk>;
+ always-on;
+ };
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>, <0x100 0x100>;
+ };
+ };
+
+ l2cc: l2-cache-controller@20100000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x20100000 0x1000>;
+ cache-level = <2>;
+ cache-unified;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&irq0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ xtal: xtal {
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ #clock-cells = <0>;
+ };
+
+ clkgen: clkgen@10000 {
+ compatible = "sigma,tango4-clkgen";
+ reg = <0x10000 0x40>;
+ clocks = <&xtal>;
+ #clock-cells = <1>;
+ };
+
+ tick-counter@10048 {
+ compatible = "sigma,tick-counter";
+ reg = <0x10048 0x4>;
+ clocks = <&xtal>;
+ };
+
+ uart: serial@10700 {
+ compatible = "ralink,rt2880-uart";
+ reg = <0x10700 0x30>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <7372800>;
+ reg-shift = <2>;
+ };
+
+ eth0: ethernet@26000 {
+ compatible = "sigma,smp8734-ethernet";
+ reg = <0x26000 0x800>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkgen SYS_CLK>;
+ };
+
+ intc: interrupt-controller@6e000 {
+ compatible = "sigma,smp8642-intc";
+ reg = <0x6e000 0x400>;
+ ranges = <0 0x6e000 0x400>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ irq0: irq0@000 {
+ reg = <0x000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ irq1: irq1@100 {
+ reg = <0x100 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ irq2: irq2@300 {
+ reg = <0x300 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi
new file mode 100644
index 0000000..7ed88ee
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-smp8758.dtsi
@@ -0,0 +1,31 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "sigma,tango4-smp";
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&l2cc>;
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&l2cc>;
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ interrupts =
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts
new file mode 100644
index 0000000..3e5b9c8
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-vantage-1172.dts
@@ -0,0 +1,37 @@
+/dts-v1/;
+
+#include "tango4-smp8758.dtsi"
+#include "tango4-common.dtsi"
+
+/ {
+ model = "Sigma Designs SMP8758 Vantage-1172 Rev E1";
+ compatible = "sigma,vantage-1172", "sigma,smp8758", "sigma,tango4";
+
+ aliases {
+ serial = &uart;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>; /* 2 GB */
+ };
+
+ chosen {
+ stdout-path = "serial:115200n8";
+ };
+};
+
+ð0 {
+ phy-connection-type = "rgmii";
+ phy-handle = <ð0_phy>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Atheros AR8035 */
+ eth0_phy: ethernet-phy@4 {
+ compatible = "ethernet-phy-id004d.d072",
+ "ethernet-phy-ieee802.3-c22";
+ interrupts = <37 IRQ_TYPE_EDGE_RISING>;
+ reg = <4>;
+ };
+};