POWERPC: drivers: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 53d052e..8e90e89 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -76,7 +76,7 @@
return PCI_DN(np);
}
-static int __devinit pnv_ioda_alloc_pe(struct pnv_phb *phb)
+static int pnv_ioda_alloc_pe(struct pnv_phb *phb)
{
unsigned long pe;
@@ -91,7 +91,7 @@
return pe;
}
-static void __devinit pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
+static void pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
{
WARN_ON(phb->ioda.pe_array[pe].pdev);
@@ -103,7 +103,7 @@
* but in the meantime, we need to protect them to avoid warnings
*/
#ifdef CONFIG_PCI_MSI
-static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev)
+static struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
struct pnv_phb *phb = hose->private_data;
@@ -117,8 +117,7 @@
}
#endif /* CONFIG_PCI_MSI */
-static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
- struct pnv_ioda_pe *pe)
+static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
{
struct pci_dev *parent;
uint8_t bcomp, dcomp, fcomp;
@@ -207,8 +206,8 @@
return 0;
}
-static void __devinit pnv_ioda_link_pe_by_weight(struct pnv_phb *phb,
- struct pnv_ioda_pe *pe)
+static void pnv_ioda_link_pe_by_weight(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
{
struct pnv_ioda_pe *lpe;
@@ -246,7 +245,7 @@
}
#if 0
-static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev)
+static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
struct pnv_phb *phb = hose->private_data;
@@ -343,7 +342,7 @@
* subordinate PCI devices and buses. The second type of PE is normally
* orgiriated by PCIe-to-PCI bridge or PLX switch downstream ports.
*/
-static void __devinit pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
+static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all)
{
struct pci_controller *hose = pci_bus_to_host(bus);
struct pnv_phb *phb = hose->private_data;
@@ -399,7 +398,7 @@
pnv_ioda_link_pe_by_weight(phb, pe);
}
-static void __devinit pnv_ioda_setup_PEs(struct pci_bus *bus)
+static void pnv_ioda_setup_PEs(struct pci_bus *bus)
{
struct pci_dev *dev;
@@ -423,7 +422,7 @@
* port to PE# here. The game rule here is expected to be changed
* as soon as we can detected PLX bridge correctly.
*/
-static void __devinit pnv_pci_ioda_setup_PEs(void)
+static void pnv_pci_ioda_setup_PEs(void)
{
struct pci_controller *hose, *tmp;
@@ -432,14 +431,12 @@
}
}
-static void __devinit pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb,
- struct pci_dev *dev)
+static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *dev)
{
/* We delay DMA setup after we have assigned all PE# */
}
-static void __devinit pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
- struct pci_bus *bus)
+static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
{
struct pci_dev *dev;
@@ -450,10 +447,9 @@
}
}
-static void __devinit pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
- struct pnv_ioda_pe *pe,
- unsigned int base,
- unsigned int segs)
+static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe, unsigned int base,
+ unsigned int segs)
{
struct page *tce_mem = NULL;
@@ -541,7 +537,7 @@
__free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
}
-static void __devinit pnv_ioda_setup_dma(struct pnv_phb *phb)
+static void pnv_ioda_setup_dma(struct pnv_phb *phb)
{
struct pci_controller *hose = phb->hose;
unsigned int residual, remaining, segs, tw, base;
@@ -684,8 +680,8 @@
* to bottom style. So the the I/O or MMIO segment assigned to
* parent PE could be overrided by its child PEs if necessary.
*/
-static void __devinit pnv_ioda_setup_pe_seg(struct pci_controller *hose,
- struct pnv_ioda_pe *pe)
+static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
+ struct pnv_ioda_pe *pe)
{
struct pnv_phb *phb = hose->private_data;
struct pci_bus_region region;
@@ -753,7 +749,7 @@
}
}
-static void __devinit pnv_pci_ioda_setup_seg(void)
+static void pnv_pci_ioda_setup_seg(void)
{
struct pci_controller *tmp, *hose;
struct pnv_phb *phb;
@@ -767,7 +763,7 @@
}
}
-static void __devinit pnv_pci_ioda_setup_DMA(void)
+static void pnv_pci_ioda_setup_DMA(void)
{
struct pci_controller *hose, *tmp;
struct pnv_phb *phb;
@@ -781,7 +777,7 @@
}
}
-static void __devinit pnv_pci_ioda_fixup(void)
+static void pnv_pci_ioda_fixup(void)
{
pnv_pci_ioda_setup_PEs();
pnv_pci_ioda_setup_seg();
@@ -829,7 +825,7 @@
/* Prevent enabling devices for which we couldn't properly
* assign a PE
*/
-static int __devinit pnv_pci_enable_device_hook(struct pci_dev *dev)
+static int pnv_pci_enable_device_hook(struct pci_dev *dev)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
struct pnv_phb *phb = hose->private_data;