| /* |
| * HID driver for Sony / PS2 / PS3 BD devices. |
| * |
| * Copyright (c) 1999 Andreas Gal |
| * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> |
| * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc |
| * Copyright (c) 2008 Jiri Slaby |
| * Copyright (c) 2012 David Dillow <dave@thedillows.org> |
| * Copyright (c) 2006-2013 Jiri Kosina |
| * Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com> |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| */ |
| |
| /* NOTE: in order for the Sony PS3 BD Remote Control to be found by |
| * a Bluetooth host, the key combination Start+Enter has to be kept pressed |
| * for about 7 seconds with the Bluetooth Host Controller in discovering mode. |
| * |
| * There will be no PIN request from the device. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/hid.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/leds.h> |
| |
| #include "hid-ids.h" |
| |
| #define VAIO_RDESC_CONSTANT BIT(0) |
| #define SIXAXIS_CONTROLLER_USB BIT(1) |
| #define SIXAXIS_CONTROLLER_BT BIT(2) |
| #define BUZZ_CONTROLLER BIT(3) |
| #define PS3REMOTE BIT(4) |
| #define DUALSHOCK4_CONTROLLER BIT(5) |
| |
| #define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER_USB | BUZZ_CONTROLLER | DUALSHOCK4_CONTROLLER) |
| |
| #define MAX_LEDS 4 |
| |
| static const u8 sixaxis_rdesc_fixup[] = { |
| 0x95, 0x13, 0x09, 0x01, 0x81, 0x02, 0x95, 0x0C, |
| 0x81, 0x01, 0x75, 0x10, 0x95, 0x04, 0x26, 0xFF, |
| 0x03, 0x46, 0xFF, 0x03, 0x09, 0x01, 0x81, 0x02 |
| }; |
| |
| static const u8 sixaxis_rdesc_fixup2[] = { |
| 0x05, 0x01, 0x09, 0x04, 0xa1, 0x01, 0xa1, 0x02, |
| 0x85, 0x01, 0x75, 0x08, 0x95, 0x01, 0x15, 0x00, |
| 0x26, 0xff, 0x00, 0x81, 0x03, 0x75, 0x01, 0x95, |
| 0x13, 0x15, 0x00, 0x25, 0x01, 0x35, 0x00, 0x45, |
| 0x01, 0x05, 0x09, 0x19, 0x01, 0x29, 0x13, 0x81, |
| 0x02, 0x75, 0x01, 0x95, 0x0d, 0x06, 0x00, 0xff, |
| 0x81, 0x03, 0x15, 0x00, 0x26, 0xff, 0x00, 0x05, |
| 0x01, 0x09, 0x01, 0xa1, 0x00, 0x75, 0x08, 0x95, |
| 0x04, 0x35, 0x00, 0x46, 0xff, 0x00, 0x09, 0x30, |
| 0x09, 0x31, 0x09, 0x32, 0x09, 0x35, 0x81, 0x02, |
| 0xc0, 0x05, 0x01, 0x95, 0x13, 0x09, 0x01, 0x81, |
| 0x02, 0x95, 0x0c, 0x81, 0x01, 0x75, 0x10, 0x95, |
| 0x04, 0x26, 0xff, 0x03, 0x46, 0xff, 0x03, 0x09, |
| 0x01, 0x81, 0x02, 0xc0, 0xa1, 0x02, 0x85, 0x02, |
| 0x75, 0x08, 0x95, 0x30, 0x09, 0x01, 0xb1, 0x02, |
| 0xc0, 0xa1, 0x02, 0x85, 0xee, 0x75, 0x08, 0x95, |
| 0x30, 0x09, 0x01, 0xb1, 0x02, 0xc0, 0xa1, 0x02, |
| 0x85, 0xef, 0x75, 0x08, 0x95, 0x30, 0x09, 0x01, |
| 0xb1, 0x02, 0xc0, 0xc0, |
| }; |
| |
| static __u8 ps3remote_rdesc[] = { |
| 0x05, 0x01, /* GUsagePage Generic Desktop */ |
| 0x09, 0x05, /* LUsage 0x05 [Game Pad] */ |
| 0xA1, 0x01, /* MCollection Application (mouse, keyboard) */ |
| |
| /* Use collection 1 for joypad buttons */ |
| 0xA1, 0x02, /* MCollection Logical (interrelated data) */ |
| |
| /* Ignore the 1st byte, maybe it is used for a controller |
| * number but it's not needed for correct operation */ |
| 0x75, 0x08, /* GReportSize 0x08 [8] */ |
| 0x95, 0x01, /* GReportCount 0x01 [1] */ |
| 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */ |
| |
| /* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these |
| * buttons multiple keypresses are allowed */ |
| 0x05, 0x09, /* GUsagePage Button */ |
| 0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */ |
| 0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */ |
| 0x14, /* GLogicalMinimum [0] */ |
| 0x25, 0x01, /* GLogicalMaximum 0x01 [1] */ |
| 0x75, 0x01, /* GReportSize 0x01 [1] */ |
| 0x95, 0x18, /* GReportCount 0x18 [24] */ |
| 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */ |
| |
| 0xC0, /* MEndCollection */ |
| |
| /* Use collection 2 for remote control buttons */ |
| 0xA1, 0x02, /* MCollection Logical (interrelated data) */ |
| |
| /* 5th byte is used for remote control buttons */ |
| 0x05, 0x09, /* GUsagePage Button */ |
| 0x18, /* LUsageMinimum [No button pressed] */ |
| 0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */ |
| 0x14, /* GLogicalMinimum [0] */ |
| 0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */ |
| 0x75, 0x08, /* GReportSize 0x08 [8] */ |
| 0x95, 0x01, /* GReportCount 0x01 [1] */ |
| 0x80, /* MInput */ |
| |
| /* Ignore bytes from 6th to 11th, 6th to 10th are always constant at |
| * 0xff and 11th is for press indication */ |
| 0x75, 0x08, /* GReportSize 0x08 [8] */ |
| 0x95, 0x06, /* GReportCount 0x06 [6] */ |
| 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */ |
| |
| /* 12th byte is for battery strength */ |
| 0x05, 0x06, /* GUsagePage Generic Device Controls */ |
| 0x09, 0x20, /* LUsage 0x20 [Battery Strength] */ |
| 0x14, /* GLogicalMinimum [0] */ |
| 0x25, 0x05, /* GLogicalMaximum 0x05 [5] */ |
| 0x75, 0x08, /* GReportSize 0x08 [8] */ |
| 0x95, 0x01, /* GReportCount 0x01 [1] */ |
| 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */ |
| |
| 0xC0, /* MEndCollection */ |
| |
| 0xC0 /* MEndCollection [Game Pad] */ |
| }; |
| |
| static const unsigned int ps3remote_keymap_joypad_buttons[] = { |
| [0x01] = KEY_SELECT, |
| [0x02] = BTN_THUMBL, /* L3 */ |
| [0x03] = BTN_THUMBR, /* R3 */ |
| [0x04] = BTN_START, |
| [0x05] = KEY_UP, |
| [0x06] = KEY_RIGHT, |
| [0x07] = KEY_DOWN, |
| [0x08] = KEY_LEFT, |
| [0x09] = BTN_TL2, /* L2 */ |
| [0x0a] = BTN_TR2, /* R2 */ |
| [0x0b] = BTN_TL, /* L1 */ |
| [0x0c] = BTN_TR, /* R1 */ |
| [0x0d] = KEY_OPTION, /* options/triangle */ |
| [0x0e] = KEY_BACK, /* back/circle */ |
| [0x0f] = BTN_0, /* cross */ |
| [0x10] = KEY_SCREEN, /* view/square */ |
| [0x11] = KEY_HOMEPAGE, /* PS button */ |
| [0x14] = KEY_ENTER, |
| }; |
| static const unsigned int ps3remote_keymap_remote_buttons[] = { |
| [0x00] = KEY_1, |
| [0x01] = KEY_2, |
| [0x02] = KEY_3, |
| [0x03] = KEY_4, |
| [0x04] = KEY_5, |
| [0x05] = KEY_6, |
| [0x06] = KEY_7, |
| [0x07] = KEY_8, |
| [0x08] = KEY_9, |
| [0x09] = KEY_0, |
| [0x0e] = KEY_ESC, /* return */ |
| [0x0f] = KEY_CLEAR, |
| [0x16] = KEY_EJECTCD, |
| [0x1a] = KEY_MENU, /* top menu */ |
| [0x28] = KEY_TIME, |
| [0x30] = KEY_PREVIOUS, |
| [0x31] = KEY_NEXT, |
| [0x32] = KEY_PLAY, |
| [0x33] = KEY_REWIND, /* scan back */ |
| [0x34] = KEY_FORWARD, /* scan forward */ |
| [0x38] = KEY_STOP, |
| [0x39] = KEY_PAUSE, |
| [0x40] = KEY_CONTEXT_MENU, /* pop up/menu */ |
| [0x60] = KEY_FRAMEBACK, /* slow/step back */ |
| [0x61] = KEY_FRAMEFORWARD, /* slow/step forward */ |
| [0x63] = KEY_SUBTITLE, |
| [0x64] = KEY_AUDIO, |
| [0x65] = KEY_ANGLE, |
| [0x70] = KEY_INFO, /* display */ |
| [0x80] = KEY_BLUE, |
| [0x81] = KEY_RED, |
| [0x82] = KEY_GREEN, |
| [0x83] = KEY_YELLOW, |
| }; |
| |
| static const unsigned int buzz_keymap[] = { |
| /* The controller has 4 remote buzzers, each with one LED and 5 |
| * buttons. |
| * |
| * We use the mapping chosen by the controller, which is: |
| * |
| * Key Offset |
| * ------------------- |
| * Buzz 1 |
| * Blue 5 |
| * Orange 4 |
| * Green 3 |
| * Yellow 2 |
| * |
| * So, for example, the orange button on the third buzzer is mapped to |
| * BTN_TRIGGER_HAPPY14 |
| */ |
| [ 1] = BTN_TRIGGER_HAPPY1, |
| [ 2] = BTN_TRIGGER_HAPPY2, |
| [ 3] = BTN_TRIGGER_HAPPY3, |
| [ 4] = BTN_TRIGGER_HAPPY4, |
| [ 5] = BTN_TRIGGER_HAPPY5, |
| [ 6] = BTN_TRIGGER_HAPPY6, |
| [ 7] = BTN_TRIGGER_HAPPY7, |
| [ 8] = BTN_TRIGGER_HAPPY8, |
| [ 9] = BTN_TRIGGER_HAPPY9, |
| [10] = BTN_TRIGGER_HAPPY10, |
| [11] = BTN_TRIGGER_HAPPY11, |
| [12] = BTN_TRIGGER_HAPPY12, |
| [13] = BTN_TRIGGER_HAPPY13, |
| [14] = BTN_TRIGGER_HAPPY14, |
| [15] = BTN_TRIGGER_HAPPY15, |
| [16] = BTN_TRIGGER_HAPPY16, |
| [17] = BTN_TRIGGER_HAPPY17, |
| [18] = BTN_TRIGGER_HAPPY18, |
| [19] = BTN_TRIGGER_HAPPY19, |
| [20] = BTN_TRIGGER_HAPPY20, |
| }; |
| |
| struct sony_sc { |
| struct hid_device *hdev; |
| struct led_classdev *leds[MAX_LEDS]; |
| unsigned long quirks; |
| struct work_struct state_worker; |
| |
| #ifdef CONFIG_SONY_FF |
| __u8 left; |
| __u8 right; |
| #endif |
| |
| __u8 led_state[MAX_LEDS]; |
| __u8 led_count; |
| }; |
| |
| static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc, |
| unsigned int *rsize) |
| { |
| *rsize = sizeof(ps3remote_rdesc); |
| return ps3remote_rdesc; |
| } |
| |
| static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi, |
| struct hid_field *field, struct hid_usage *usage, |
| unsigned long **bit, int *max) |
| { |
| unsigned int key = usage->hid & HID_USAGE; |
| |
| if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON) |
| return -1; |
| |
| switch (usage->collection_index) { |
| case 1: |
| if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons)) |
| return -1; |
| |
| key = ps3remote_keymap_joypad_buttons[key]; |
| if (!key) |
| return -1; |
| break; |
| case 2: |
| if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons)) |
| return -1; |
| |
| key = ps3remote_keymap_remote_buttons[key]; |
| if (!key) |
| return -1; |
| break; |
| default: |
| return -1; |
| } |
| |
| hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key); |
| return 1; |
| } |
| |
| |
| /* Sony Vaio VGX has wrongly mouse pointer declared as constant */ |
| static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc, |
| unsigned int *rsize) |
| { |
| struct sony_sc *sc = hid_get_drvdata(hdev); |
| |
| /* |
| * Some Sony RF receivers wrongly declare the mouse pointer as a |
| * a constant non-data variable. |
| */ |
| if ((sc->quirks & VAIO_RDESC_CONSTANT) && *rsize >= 56 && |
| /* usage page: generic desktop controls */ |
| /* rdesc[0] == 0x05 && rdesc[1] == 0x01 && */ |
| /* usage: mouse */ |
| rdesc[2] == 0x09 && rdesc[3] == 0x02 && |
| /* input (usage page for x,y axes): constant, variable, relative */ |
| rdesc[54] == 0x81 && rdesc[55] == 0x07) { |
| hid_info(hdev, "Fixing up Sony RF Receiver report descriptor\n"); |
| /* input: data, variable, relative */ |
| rdesc[55] = 0x06; |
| } |
| |
| /* The HID descriptor exposed over BT has a trailing zero byte */ |
| if ((((sc->quirks & SIXAXIS_CONTROLLER_USB) && *rsize == 148) || |
| ((sc->quirks & SIXAXIS_CONTROLLER_BT) && *rsize == 149)) && |
| rdesc[83] == 0x75) { |
| hid_info(hdev, "Fixing up Sony Sixaxis report descriptor\n"); |
| memcpy((void *)&rdesc[83], (void *)&sixaxis_rdesc_fixup, |
| sizeof(sixaxis_rdesc_fixup)); |
| } else if (sc->quirks & SIXAXIS_CONTROLLER_USB && |
| *rsize > sizeof(sixaxis_rdesc_fixup2)) { |
| hid_info(hdev, "Sony Sixaxis clone detected. Using original report descriptor (size: %d clone; %d new)\n", |
| *rsize, (int)sizeof(sixaxis_rdesc_fixup2)); |
| *rsize = sizeof(sixaxis_rdesc_fixup2); |
| memcpy(rdesc, &sixaxis_rdesc_fixup2, *rsize); |
| } |
| |
| if (sc->quirks & PS3REMOTE) |
| return ps3remote_fixup(hdev, rdesc, rsize); |
| |
| return rdesc; |
| } |
| |
| static int sony_raw_event(struct hid_device *hdev, struct hid_report *report, |
| __u8 *rd, int size) |
| { |
| struct sony_sc *sc = hid_get_drvdata(hdev); |
| |
| /* Sixaxis HID report has acclerometers/gyro with MSByte first, this |
| * has to be BYTE_SWAPPED before passing up to joystick interface |
| */ |
| if ((sc->quirks & (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)) && |
| rd[0] == 0x01 && size == 49) { |
| swap(rd[41], rd[42]); |
| swap(rd[43], rd[44]); |
| swap(rd[45], rd[46]); |
| swap(rd[47], rd[48]); |
| } |
| |
| return 0; |
| } |
| |
| static int sony_mapping(struct hid_device *hdev, struct hid_input *hi, |
| struct hid_field *field, struct hid_usage *usage, |
| unsigned long **bit, int *max) |
| { |
| struct sony_sc *sc = hid_get_drvdata(hdev); |
| |
| if (sc->quirks & BUZZ_CONTROLLER) { |
| unsigned int key = usage->hid & HID_USAGE; |
| |
| if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON) |
| return -1; |
| |
| switch (usage->collection_index) { |
| case 1: |
| if (key >= ARRAY_SIZE(buzz_keymap)) |
| return -1; |
| |
| key = buzz_keymap[key]; |
| if (!key) |
| return -1; |
| break; |
| default: |
| return -1; |
| } |
| |
| hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key); |
| return 1; |
| } |
| |
| if (sc->quirks & PS3REMOTE) |
| return ps3remote_mapping(hdev, hi, field, usage, bit, max); |
| |
| /* Let hid-core decide for the others */ |
| return 0; |
| } |
| |
| /* |
| * The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP |
| * like it should according to usbhid/hid-core.c::usbhid_output_raw_report() |
| * so we need to override that forcing HID Output Reports on the Control EP. |
| * |
| * There is also another issue about HID Output Reports via USB, the Sixaxis |
| * does not want the report_id as part of the data packet, so we have to |
| * discard buf[0] when sending the actual control message, even for numbered |
| * reports, humpf! |
| */ |
| static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf, |
| size_t count, unsigned char report_type) |
| { |
| struct usb_interface *intf = to_usb_interface(hid->dev.parent); |
| struct usb_device *dev = interface_to_usbdev(intf); |
| struct usb_host_interface *interface = intf->cur_altsetting; |
| int report_id = buf[0]; |
| int ret; |
| |
| if (report_type == HID_OUTPUT_REPORT) { |
| /* Don't send the Report ID */ |
| buf++; |
| count--; |
| } |
| |
| ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
| HID_REQ_SET_REPORT, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| ((report_type + 1) << 8) | report_id, |
| interface->desc.bInterfaceNumber, buf, count, |
| USB_CTRL_SET_TIMEOUT); |
| |
| /* Count also the Report ID, in case of an Output report. */ |
| if (ret > 0 && report_type == HID_OUTPUT_REPORT) |
| ret++; |
| |
| return ret; |
| } |
| |
| /* |
| * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller |
| * to "operational". Without this, the ps3 controller will not report any |
| * events. |
| */ |
| static int sixaxis_set_operational_usb(struct hid_device *hdev) |
| { |
| int ret; |
| char *buf = kmalloc(18, GFP_KERNEL); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = hdev->hid_get_raw_report(hdev, 0xf2, buf, 17, HID_FEATURE_REPORT); |
| |
| if (ret < 0) |
| hid_err(hdev, "can't set operational mode\n"); |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| static int sixaxis_set_operational_bt(struct hid_device *hdev) |
| { |
| unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 }; |
| return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT); |
| } |
| |
| static void buzz_set_leds(struct hid_device *hdev, const __u8 *leds) |
| { |
| struct list_head *report_list = |
| &hdev->report_enum[HID_OUTPUT_REPORT].report_list; |
| struct hid_report *report = list_entry(report_list->next, |
| struct hid_report, list); |
| __s32 *value = report->field[0]->value; |
| |
| value[0] = 0x00; |
| value[1] = leds[0] ? 0xff : 0x00; |
| value[2] = leds[1] ? 0xff : 0x00; |
| value[3] = leds[2] ? 0xff : 0x00; |
| value[4] = leds[3] ? 0xff : 0x00; |
| value[5] = 0x00; |
| value[6] = 0x00; |
| hid_hw_request(hdev, report, HID_REQ_SET_REPORT); |
| } |
| |
| static void sony_set_leds(struct hid_device *hdev, const __u8 *leds, int count) |
| { |
| struct sony_sc *drv_data = hid_get_drvdata(hdev); |
| int n; |
| |
| BUG_ON(count > MAX_LEDS); |
| |
| if (drv_data->quirks & BUZZ_CONTROLLER && count == 4) { |
| buzz_set_leds(hdev, leds); |
| } else if ((drv_data->quirks & SIXAXIS_CONTROLLER_USB) || |
| (drv_data->quirks & DUALSHOCK4_CONTROLLER)) { |
| for (n = 0; n < count; n++) |
| drv_data->led_state[n] = leds[n]; |
| schedule_work(&drv_data->state_worker); |
| } |
| } |
| |
| static void sony_led_set_brightness(struct led_classdev *led, |
| enum led_brightness value) |
| { |
| struct device *dev = led->dev->parent; |
| struct hid_device *hdev = container_of(dev, struct hid_device, dev); |
| struct sony_sc *drv_data; |
| |
| int n; |
| |
| drv_data = hid_get_drvdata(hdev); |
| if (!drv_data) { |
| hid_err(hdev, "No device data\n"); |
| return; |
| } |
| |
| for (n = 0; n < drv_data->led_count; n++) { |
| if (led == drv_data->leds[n]) { |
| if (value != drv_data->led_state[n]) { |
| drv_data->led_state[n] = value; |
| sony_set_leds(hdev, drv_data->led_state, drv_data->led_count); |
| } |
| break; |
| } |
| } |
| } |
| |
| static enum led_brightness sony_led_get_brightness(struct led_classdev *led) |
| { |
| struct device *dev = led->dev->parent; |
| struct hid_device *hdev = container_of(dev, struct hid_device, dev); |
| struct sony_sc *drv_data; |
| |
| int n; |
| int on = 0; |
| |
| drv_data = hid_get_drvdata(hdev); |
| if (!drv_data) { |
| hid_err(hdev, "No device data\n"); |
| return LED_OFF; |
| } |
| |
| for (n = 0; n < drv_data->led_count; n++) { |
| if (led == drv_data->leds[n]) { |
| on = !!(drv_data->led_state[n]); |
| break; |
| } |
| } |
| |
| return on ? LED_FULL : LED_OFF; |
| } |
| |
| static void sony_leds_remove(struct hid_device *hdev) |
| { |
| struct sony_sc *drv_data; |
| struct led_classdev *led; |
| int n; |
| |
| drv_data = hid_get_drvdata(hdev); |
| BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT)); |
| |
| for (n = 0; n < drv_data->led_count; n++) { |
| led = drv_data->leds[n]; |
| drv_data->leds[n] = NULL; |
| if (!led) |
| continue; |
| led_classdev_unregister(led); |
| kfree(led); |
| } |
| |
| drv_data->led_count = 0; |
| } |
| |
| static int sony_leds_init(struct hid_device *hdev) |
| { |
| struct sony_sc *drv_data; |
| int n, ret = 0; |
| int max_brightness; |
| struct led_classdev *led; |
| size_t name_sz; |
| char *name; |
| size_t name_len; |
| const char *name_fmt; |
| static const __u8 initial_values[MAX_LEDS] = { 0x00, 0x00, 0x00, 0x00 }; |
| |
| drv_data = hid_get_drvdata(hdev); |
| BUG_ON(!(drv_data->quirks & SONY_LED_SUPPORT)); |
| |
| if (drv_data->quirks & BUZZ_CONTROLLER) { |
| name_len = strlen("::buzz#"); |
| name_fmt = "%s::buzz%d"; |
| /* Validate expected report characteristics. */ |
| if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 7)) |
| return -ENODEV; |
| } else { |
| name_len = strlen("::sony#"); |
| name_fmt = "%s::sony%d"; |
| } |
| |
| if (drv_data->quirks & DUALSHOCK4_CONTROLLER) { |
| drv_data->led_count = 3; |
| max_brightness = 255; |
| } else { |
| drv_data->led_count = 4; |
| max_brightness = 1; |
| } |
| |
| /* Clear LEDs as we have no way of reading their initial state. This is |
| * only relevant if the driver is loaded after somebody actively set the |
| * LEDs to on */ |
| sony_set_leds(hdev, initial_values, drv_data->led_count); |
| |
| name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1; |
| |
| for (n = 0; n < drv_data->led_count; n++) { |
| led = kzalloc(sizeof(struct led_classdev) + name_sz, GFP_KERNEL); |
| if (!led) { |
| hid_err(hdev, "Couldn't allocate memory for LED %d\n", n); |
| ret = -ENOMEM; |
| goto error_leds; |
| } |
| |
| name = (void *)(&led[1]); |
| snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev), n + 1); |
| led->name = name; |
| led->brightness = 0; |
| led->max_brightness = max_brightness; |
| led->brightness_get = sony_led_get_brightness; |
| led->brightness_set = sony_led_set_brightness; |
| |
| ret = led_classdev_register(&hdev->dev, led); |
| if (ret) { |
| hid_err(hdev, "Failed to register LED %d\n", n); |
| kfree(led); |
| goto error_leds; |
| } |
| |
| drv_data->leds[n] = led; |
| } |
| |
| return ret; |
| |
| error_leds: |
| sony_leds_remove(hdev); |
| |
| return ret; |
| } |
| |
| static void sixaxis_state_worker(struct work_struct *work) |
| { |
| struct sony_sc *sc = container_of(work, struct sony_sc, state_worker); |
| unsigned char buf[] = { |
| 0x01, |
| 0x00, 0xff, 0x00, 0xff, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0xff, 0x27, 0x10, 0x00, 0x32, |
| 0xff, 0x27, 0x10, 0x00, 0x32, |
| 0xff, 0x27, 0x10, 0x00, 0x32, |
| 0xff, 0x27, 0x10, 0x00, 0x32, |
| 0x00, 0x00, 0x00, 0x00, 0x00 |
| }; |
| |
| #ifdef CONFIG_SONY_FF |
| buf[3] = sc->right ? 1 : 0; |
| buf[5] = sc->left; |
| #endif |
| |
| buf[10] |= sc->led_state[0] << 1; |
| buf[10] |= sc->led_state[1] << 2; |
| buf[10] |= sc->led_state[2] << 3; |
| buf[10] |= sc->led_state[3] << 4; |
| |
| sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf), |
| HID_OUTPUT_REPORT); |
| } |
| |
| static void dualshock4_state_worker(struct work_struct *work) |
| { |
| struct sony_sc *sc = container_of(work, struct sony_sc, state_worker); |
| unsigned char buf[] = { |
| 0x05, |
| 0x03, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, |
| }; |
| |
| #ifdef CONFIG_SONY_FF |
| buf[4] = sc->right; |
| buf[5] = sc->left; |
| #endif |
| |
| buf[6] = sc->led_state[0]; |
| buf[7] = sc->led_state[1]; |
| buf[8] = sc->led_state[2]; |
| |
| sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf), |
| HID_OUTPUT_REPORT); |
| } |
| |
| #ifdef CONFIG_SONY_FF |
| static int sony_play_effect(struct input_dev *dev, void *data, |
| struct ff_effect *effect) |
| { |
| struct hid_device *hid = input_get_drvdata(dev); |
| struct sony_sc *sc = hid_get_drvdata(hid); |
| |
| if (effect->type != FF_RUMBLE) |
| return 0; |
| |
| sc->left = effect->u.rumble.strong_magnitude / 256; |
| sc->right = effect->u.rumble.weak_magnitude / 256; |
| |
| schedule_work(&sc->state_worker); |
| return 0; |
| } |
| |
| static int sony_init_ff(struct hid_device *hdev) |
| { |
| struct hid_input *hidinput = list_entry(hdev->inputs.next, |
| struct hid_input, list); |
| struct input_dev *input_dev = hidinput->input; |
| |
| input_set_capability(input_dev, EV_FF, FF_RUMBLE); |
| return input_ff_create_memless(input_dev, NULL, sony_play_effect); |
| } |
| |
| static void sony_destroy_ff(struct hid_device *hdev) |
| { |
| struct sony_sc *sc = hid_get_drvdata(hdev); |
| |
| cancel_work_sync(&sc->state_worker); |
| } |
| |
| #else |
| static int sony_init_ff(struct hid_device *hdev) |
| { |
| return 0; |
| } |
| |
| static void sony_destroy_ff(struct hid_device *hdev) |
| { |
| } |
| #endif |
| |
| static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) |
| { |
| int ret; |
| unsigned long quirks = id->driver_data; |
| struct sony_sc *sc; |
| unsigned int connect_mask = HID_CONNECT_DEFAULT; |
| |
| sc = devm_kzalloc(&hdev->dev, sizeof(*sc), GFP_KERNEL); |
| if (sc == NULL) { |
| hid_err(hdev, "can't alloc sony descriptor\n"); |
| return -ENOMEM; |
| } |
| |
| sc->quirks = quirks; |
| hid_set_drvdata(hdev, sc); |
| sc->hdev = hdev; |
| |
| ret = hid_parse(hdev); |
| if (ret) { |
| hid_err(hdev, "parse failed\n"); |
| return ret; |
| } |
| |
| if (sc->quirks & VAIO_RDESC_CONSTANT) |
| connect_mask |= HID_CONNECT_HIDDEV_FORCE; |
| else if (sc->quirks & SIXAXIS_CONTROLLER_USB) |
| connect_mask |= HID_CONNECT_HIDDEV_FORCE; |
| else if (sc->quirks & SIXAXIS_CONTROLLER_BT) |
| connect_mask |= HID_CONNECT_HIDDEV_FORCE; |
| |
| ret = hid_hw_start(hdev, connect_mask); |
| if (ret) { |
| hid_err(hdev, "hw start failed\n"); |
| return ret; |
| } |
| |
| if (sc->quirks & SIXAXIS_CONTROLLER_USB) { |
| hdev->hid_output_raw_report = sixaxis_usb_output_raw_report; |
| ret = sixaxis_set_operational_usb(hdev); |
| INIT_WORK(&sc->state_worker, sixaxis_state_worker); |
| } |
| else if (sc->quirks & SIXAXIS_CONTROLLER_BT) |
| ret = sixaxis_set_operational_bt(hdev); |
| else if (sc->quirks & DUALSHOCK4_CONTROLLER) { |
| ret = 0; |
| INIT_WORK(&sc->state_worker, dualshock4_state_worker); |
| } else { |
| ret = 0; |
| } |
| |
| if (ret < 0) |
| goto err_stop; |
| |
| if (sc->quirks & SONY_LED_SUPPORT) { |
| ret = sony_leds_init(hdev); |
| if (ret < 0) |
| goto err_stop; |
| } |
| |
| ret = sony_init_ff(hdev); |
| if (ret < 0) |
| goto err_stop; |
| |
| return 0; |
| err_stop: |
| if (sc->quirks & SONY_LED_SUPPORT) |
| sony_leds_remove(hdev); |
| hid_hw_stop(hdev); |
| return ret; |
| } |
| |
| static void sony_remove(struct hid_device *hdev) |
| { |
| struct sony_sc *sc = hid_get_drvdata(hdev); |
| |
| if (sc->quirks & SONY_LED_SUPPORT) |
| sony_leds_remove(hdev); |
| |
| sony_destroy_ff(hdev); |
| |
| hid_hw_stop(hdev); |
| } |
| |
| static const struct hid_device_id sony_devices[] = { |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER), |
| .driver_data = SIXAXIS_CONTROLLER_USB }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER), |
| .driver_data = SIXAXIS_CONTROLLER_USB }, |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER), |
| .driver_data = SIXAXIS_CONTROLLER_BT }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE), |
| .driver_data = VAIO_RDESC_CONSTANT }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE), |
| .driver_data = VAIO_RDESC_CONSTANT }, |
| /* Wired Buzz Controller. Reported as Sony Hub from its USB ID and as |
| * Logitech joystick from the device descriptor. */ |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER), |
| .driver_data = BUZZ_CONTROLLER }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER), |
| .driver_data = BUZZ_CONTROLLER }, |
| /* PS3 BD Remote Control */ |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE), |
| .driver_data = PS3REMOTE }, |
| /* Logitech Harmony Adapter for PS3 */ |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3), |
| .driver_data = PS3REMOTE }, |
| /* Sony Dualshock 4 controllers for PS4 */ |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER), |
| .driver_data = DUALSHOCK4_CONTROLLER }, |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER), |
| .driver_data = DUALSHOCK4_CONTROLLER }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(hid, sony_devices); |
| |
| static struct hid_driver sony_driver = { |
| .name = "sony", |
| .id_table = sony_devices, |
| .input_mapping = sony_mapping, |
| .probe = sony_probe, |
| .remove = sony_remove, |
| .report_fixup = sony_report_fixup, |
| .raw_event = sony_raw_event |
| }; |
| module_hid_driver(sony_driver); |
| |
| MODULE_LICENSE("GPL"); |