[ARM] pxa/corgi: cleanup GPIO configurations and low power mode settings
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 788343d..f8e2959 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -106,18 +106,18 @@
GPIO8_MMC_CS0,
/* GPIO Matrix Keypad */
- GPIO66_GPIO, /* column 0 */
- GPIO67_GPIO, /* column 1 */
- GPIO68_GPIO, /* column 2 */
- GPIO69_GPIO, /* column 3 */
- GPIO70_GPIO, /* column 4 */
- GPIO71_GPIO, /* column 5 */
- GPIO72_GPIO, /* column 6 */
- GPIO73_GPIO, /* column 7 */
- GPIO74_GPIO, /* column 8 */
- GPIO75_GPIO, /* column 9 */
- GPIO76_GPIO, /* column 10 */
- GPIO77_GPIO, /* column 11 */
+ GPIO66_GPIO | MFP_LPM_DRIVE_HIGH, /* column 0 */
+ GPIO67_GPIO | MFP_LPM_DRIVE_HIGH, /* column 1 */
+ GPIO68_GPIO | MFP_LPM_DRIVE_HIGH, /* column 2 */
+ GPIO69_GPIO | MFP_LPM_DRIVE_HIGH, /* column 3 */
+ GPIO70_GPIO | MFP_LPM_DRIVE_HIGH, /* column 4 */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* column 5 */
+ GPIO72_GPIO | MFP_LPM_DRIVE_HIGH, /* column 6 */
+ GPIO73_GPIO | MFP_LPM_DRIVE_HIGH, /* column 7 */
+ GPIO74_GPIO | MFP_LPM_DRIVE_HIGH, /* column 8 */
+ GPIO75_GPIO | MFP_LPM_DRIVE_HIGH, /* column 9 */
+ GPIO76_GPIO | MFP_LPM_DRIVE_HIGH, /* column 10 */
+ GPIO77_GPIO | MFP_LPM_DRIVE_HIGH, /* column 11 */
GPIO58_GPIO, /* row 0 */
GPIO59_GPIO, /* row 1 */
GPIO60_GPIO, /* row 2 */
@@ -128,17 +128,20 @@
GPIO65_GPIO, /* row 7 */
/* GPIO */
- GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
- GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
- GPIO21_GPIO, /* CORGI_GPIO_ADC_TEMP */
- GPIO22_GPIO, /* CORGI_GPIO_IR_ON */
- GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */
- GPIO38_GPIO, /* CORGI_GPIO_CHRG_ON */
- GPIO43_GPIO, /* CORGI_GPIO_CHRG_UKN */
- GPIO44_GPIO, /* CORGI_GPIO_HSYNC */
+ GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
+ GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
+ GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
+ GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_LED_ORANGE */
+ GPIO21_GPIO, /* CORGI_GPIO_ADC_TEMP */
+ GPIO22_GPIO, /* CORGI_GPIO_IR_ON */
+ GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */
+ GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_ON */
+ GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_UKN */
+ GPIO44_GPIO, /* CORGI_GPIO_HSYNC */
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_KEY_INT */
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* CORGI_GPIO_AC_IN */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_WAKEUP */
};
/*
@@ -676,6 +679,15 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
+ /* allow wakeup from various GPIOs */
+ gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
+ gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
+ gpio_set_wake(CORGI_GPIO_AC_IN, 1);
+ gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
+
+ if (!machine_is_corgi())
+ gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
+
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);