[media] move i2c files into drivers/media/i2c
Move ancillary I2C drivers into drivers/media/i2c, in order to
better organize them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index a7bd9576c..f2171e7 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1,578 +1,4 @@
-#
-# Generic video config states
-#
-
-config VIDEO_BTCX
- depends on PCI
- tristate
-
-config VIDEO_TVEEPROM
- tristate
- depends on I2C
-
-#
-# Multimedia Video device configuration
-#
-
-menuconfig VIDEO_CAPTURE_DRIVERS
- bool "Video capture adapters"
- depends on VIDEO_V4L2
- depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT
- default y
- ---help---
- Say Y here to enable selecting the video adapters for
- webcams, analog TV, and hybrid analog/digital TV.
- Some of those devices also supports FM radio.
-
-if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
-
-config VIDEO_HELPER_CHIPS_AUTO
- bool "Autoselect pertinent encoders/decoders and other helper chips"
- default y if !EXPERT
- ---help---
- Most video cards may require additional modules to encode or
- decode audio/video standards. This option will autoselect
- all pertinent modules to each selected video module.
-
- Unselect this only if you know exactly what you are doing, since
- it may break support on some boards.
-
- In doubt, say Y.
-
-config VIDEO_IR_I2C
- tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
- depends on I2C && RC_CORE
- default y
- ---help---
- Most boards have an IR chip directly connected via GPIO. However,
- some video boards have the IR connected via I2C bus.
-
- If your board doesn't have an I2C IR chip, you may disable this
- option.
-
- In doubt, say Y.
-
-#
-# Encoder / Decoder module configuration
-#
-
-menu "Encoders, decoders, sensors and other helper chips"
- visible if !VIDEO_HELPER_CHIPS_AUTO
-
-comment "Audio decoders, processors and mixers"
-
-config VIDEO_TVAUDIO
- tristate "Simple audio decoder chips"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for several audio decoder chips found on some bt8xx boards:
- Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
- tea6320, tea6420, tda8425, ta8874z.
- Microchip: pic16c54 based design on ProVideo PV951 board.
-
- To compile this driver as a module, choose M here: the
- module will be called tvaudio.
-
-config VIDEO_TDA7432
- tristate "Philips TDA7432 audio processor"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for tda7432 audio decoder chip found on some bt8xx boards.
-
- To compile this driver as a module, choose M here: the
- module will be called tda7432.
-
-config VIDEO_TDA9840
- tristate "Philips TDA9840 audio processor"
- depends on I2C
- ---help---
- Support for tda9840 audio decoder chip found on some Zoran boards.
-
- To compile this driver as a module, choose M here: the
- module will be called tda9840.
-
-config VIDEO_TEA6415C
- tristate "Philips TEA6415C audio processor"
- depends on I2C
- ---help---
- Support for tea6415c audio decoder chip found on some bt8xx boards.
-
- To compile this driver as a module, choose M here: the
- module will be called tea6415c.
-
-config VIDEO_TEA6420
- tristate "Philips TEA6420 audio processor"
- depends on I2C
- ---help---
- Support for tea6420 audio decoder chip found on some bt8xx boards.
-
- To compile this driver as a module, choose M here: the
- module will be called tea6420.
-
-config VIDEO_MSP3400
- tristate "Micronas MSP34xx audio decoders"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Micronas MSP34xx series of audio decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called msp3400.
-
-config VIDEO_CS5345
- tristate "Cirrus Logic CS5345 audio ADC"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Cirrus Logic CS5345 24-bit, 192 kHz
- stereo A/D converter.
-
- To compile this driver as a module, choose M here: the
- module will be called cs5345.
-
-config VIDEO_CS53L32A
- tristate "Cirrus Logic CS53L32A audio ADC"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Cirrus Logic CS53L32A low voltage
- stereo A/D converter.
-
- To compile this driver as a module, choose M here: the
- module will be called cs53l32a.
-
-config VIDEO_TLV320AIC23B
- tristate "Texas Instruments TLV320AIC23B audio codec"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
- ---help---
- Support for the Texas Instruments TLV320AIC23B audio codec.
-
- To compile this driver as a module, choose M here: the
- module will be called tlv320aic23b.
-
-config VIDEO_WM8775
- tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Wolfson Microelectronics WM8775 high
- performance stereo A/D Converter with a 4 channel input mixer.
-
- To compile this driver as a module, choose M here: the
- module will be called wm8775.
-
-config VIDEO_WM8739
- tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Wolfson Microelectronics WM8739
- stereo A/D Converter.
-
- To compile this driver as a module, choose M here: the
- module will be called wm8739.
-
-config VIDEO_VP27SMPX
- tristate "Panasonic VP27s internal MPX"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the internal MPX of the Panasonic VP27s tuner.
-
- To compile this driver as a module, choose M here: the
- module will be called vp27smpx.
-
-comment "RDS decoders"
-
-config VIDEO_SAA6588
- tristate "SAA6588 Radio Chip RDS decoder support"
- depends on VIDEO_V4L2 && I2C
-
- help
- Support for this Radio Data System (RDS) decoder. This allows
- seeing radio station identification transmitted using this
- standard.
-
- To compile this driver as a module, choose M here: the
- module will be called saa6588.
-
-comment "Video decoders"
-
-config VIDEO_ADV7180
- tristate "Analog Devices ADV7180 decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Analog Devices ADV7180 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called adv7180.
-
-config VIDEO_ADV7183
- tristate "Analog Devices ADV7183 decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- V4l2 subdevice driver for the Analog Devices
- ADV7183 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called adv7183.
-
-config VIDEO_BT819
- tristate "BT819A VideoStream decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for BT819A video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called bt819.
-
-config VIDEO_BT856
- tristate "BT856 VideoStream decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for BT856 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called bt856.
-
-config VIDEO_BT866
- tristate "BT866 VideoStream decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for BT866 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called bt866.
-
-config VIDEO_KS0127
- tristate "KS0127 video decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for KS0127 video decoder.
-
- This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
- cards.
-
- To compile this driver as a module, choose M here: the
- module will be called ks0127.
-
-config VIDEO_SAA7110
- tristate "Philips SAA7110 video decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Philips SAA7110 video decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7110.
-
-config VIDEO_SAA711X
- tristate "Philips SAA7111/3/4/5 video decoders"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Philips SAA7111/3/4/5 video decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7115.
-
-config VIDEO_SAA7191
- tristate "Philips SAA7191 video decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Philips SAA7191 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7191.
-
-config VIDEO_TVP514X
- tristate "Texas Instruments TVP514x video decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
- decoder. It is currently working with the TI OMAP3 camera
- controller.
-
- To compile this driver as a module, choose M here: the
- module will be called tvp514x.
-
-config VIDEO_TVP5150
- tristate "Texas Instruments TVP5150 video decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Texas Instruments TVP5150 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called tvp5150.
-
-config VIDEO_TVP7002
- tristate "Texas Instruments TVP7002 video decoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Texas Instruments TVP7002 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called tvp7002.
-
-config VIDEO_VPX3220
- tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for VPX322x video decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called vpx3220.
-
-comment "Video and audio decoders"
-
-config VIDEO_SAA717X
- tristate "Philips SAA7171/3/4 audio/video decoders"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Philips SAA7171/3/4 audio/video decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called saa717x.
-
-source "drivers/media/video/cx25840/Kconfig"
-
-comment "MPEG video encoders"
-
-config VIDEO_CX2341X
- tristate "Conexant CX2341x MPEG encoders"
- depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
- ---help---
- Support for the Conexant CX23416 MPEG encoders
- and CX23415 MPEG encoder/decoders.
-
- This module currently supports the encoding functions only.
-
- To compile this driver as a module, choose M here: the
- module will be called cx2341x.
-
-comment "Video encoders"
-
-config VIDEO_SAA7127
- tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Philips SAA7127/9 digital video encoders.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7127.
-
-config VIDEO_SAA7185
- tristate "Philips SAA7185 video encoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Philips SAA7185 video encoder.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7185.
-
-config VIDEO_ADV7170
- tristate "Analog Devices ADV7170 video encoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Analog Devices ADV7170 video encoder driver
-
- To compile this driver as a module, choose M here: the
- module will be called adv7170.
-
-config VIDEO_ADV7175
- tristate "Analog Devices ADV7175 video encoder"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Analog Devices ADV7175 video encoder driver
-
- To compile this driver as a module, choose M here: the
- module will be called adv7175.
-
-config VIDEO_ADV7343
- tristate "ADV7343 video encoder"
- depends on I2C
- help
- Support for Analog Devices I2C bus based ADV7343 encoder.
-
- To compile this driver as a module, choose M here: the
- module will be called adv7343.
-
-config VIDEO_ADV7393
- tristate "ADV7393 video encoder"
- depends on I2C
- help
- Support for Analog Devices I2C bus based ADV7393 encoder.
-
- To compile this driver as a module, choose M here: the
- module will be called adv7393.
-
-config VIDEO_AK881X
- tristate "AK8813/AK8814 video encoders"
- depends on I2C
- help
- Video output driver for AKM AK8813 and AK8814 TV encoders
-
-comment "Camera sensor devices"
-
-config VIDEO_APTINA_PLL
- tristate
-
-config VIDEO_SMIAPP_PLL
- tristate
-
-config VIDEO_OV7670
- tristate "OmniVision OV7670 sensor support"
- depends on I2C && VIDEO_V4L2
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This is a Video4Linux2 sensor-level driver for the OmniVision
- OV7670 VGA camera. It currently only works with the M88ALP01
- controller.
-
-config VIDEO_VS6624
- tristate "ST VS6624 sensor support"
- depends on VIDEO_V4L2 && I2C
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This is a Video4Linux2 sensor-level driver for the ST VS6624
- camera.
-
- To compile this driver as a module, choose M here: the
- module will be called vs6624.
-
-config VIDEO_MT9M032
- tristate "MT9M032 camera sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
- select VIDEO_APTINA_PLL
- ---help---
- This driver supports MT9M032 camera sensors from Aptina, monochrome
- models only.
-
-config VIDEO_MT9P031
- tristate "Aptina MT9P031 support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
- select VIDEO_APTINA_PLL
- ---help---
- This is a Video4Linux2 sensor-level driver for the Aptina
- (Micron) mt9p031 5 Mpixel camera.
-
-config VIDEO_MT9T001
- tristate "Aptina MT9T001 support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This is a Video4Linux2 sensor-level driver for the Aptina
- (Micron) mt0t001 3 Mpixel camera.
-
-config VIDEO_MT9V011
- tristate "Micron mt9v011 sensor support"
- depends on I2C && VIDEO_V4L2
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This is a Video4Linux2 sensor-level driver for the Micron
- mt0v011 1.3 Mpixel camera. It currently only works with the
- em28xx driver.
-
-config VIDEO_MT9V032
- tristate "Micron MT9V032 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This is a Video4Linux2 sensor-level driver for the Micron
- MT9V032 752x480 CMOS sensor.
-
-config VIDEO_TCM825X
- tristate "TCM825x camera sensor support"
- depends on I2C && VIDEO_V4L2
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This is a driver for the Toshiba TCM825x VGA camera sensor.
- It is used for example in Nokia N800.
-
-config VIDEO_SR030PC30
- tristate "Siliconfile SR030PC30 sensor support"
- depends on I2C && VIDEO_V4L2
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This driver supports SR030PC30 VGA camera from Siliconfile
-
-config VIDEO_NOON010PC30
- tristate "Siliconfile NOON010PC30 sensor support"
- depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This driver supports NOON010PC30 CIF camera from Siliconfile
-
-source "drivers/media/video/m5mols/Kconfig"
-
-config VIDEO_S5K6AA
- tristate "Samsung S5K6AAFX sensor support"
- depends on MEDIA_CAMERA_SUPPORT
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- ---help---
- This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
- camera sensor with an embedded SoC image signal processor.
-
-source "drivers/media/video/smiapp/Kconfig"
-
-comment "Flash devices"
-
-config VIDEO_ADP1653
- tristate "ADP1653 flash support"
- depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This is a driver for the ADP1653 flash controller. It is used for
- example in Nokia N900.
-
-config VIDEO_AS3645A
- tristate "AS3645A flash driver support"
- depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
- depends on MEDIA_CAMERA_SUPPORT
- ---help---
- This is a driver for the AS3645A and LM3555 flash controllers. It has
- build in control for flash, torch and indicator LEDs.
-
-comment "Video improvement chips"
-
-config VIDEO_UPD64031A
- tristate "NEC Electronics uPD64031A Ghost Reduction"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the NEC Electronics uPD64031A Ghost Reduction
- video chip. It is most often found in NTSC TV cards made for
- Japan and is used to reduce the 'ghosting' effect that can
- be present in analog TV broadcasts.
-
- To compile this driver as a module, choose M here: the
- module will be called upd64031a.
-
-config VIDEO_UPD64083
- tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the NEC Electronics uPD64083 3-Dimensional Y/C
- separation video chip. It is used to improve the quality of
- the colors of a composite signal.
-
- To compile this driver as a module, choose M here: the
- module will be called upd64083.
-
-comment "Miscelaneous helper chips"
-
-config VIDEO_THS7303
- tristate "THS7303 Video Amplifier"
- depends on I2C
- help
- Support for TI THS7303 video amplifier
-
- To compile this driver as a module, choose M here: the
- module will be called ths7303.
-
-config VIDEO_M52790
- tristate "Mitsubishi M52790 A/V switch"
- depends on VIDEO_V4L2 && I2C
- ---help---
- Support for the Mitsubishi M52790 A/V switch.
-
- To compile this driver as a module, choose M here: the
- module will be called m52790.
-
-endmenu # encoder / decoder chips
+if MEDIA_CAMERA_SUPPORT
config VIDEO_VIVI
tristate "Virtual Video Driver"
@@ -877,7 +303,6 @@
source "drivers/media/video/s5p-tv/Kconfig"
endif # V4L_PLATFORM_DRIVERS
-endif # VIDEO_CAPTURE_DRIVERS
menuconfig V4L_MEM2MEM_DRIVERS
bool "Memory-to-memory multimedia devices"
@@ -955,3 +380,5 @@
conversion.
endif # V4L_MEM2MEM_DRIVERS
+
+endif # MEDIA_CAMERA_SUPPORT