Merge tag 'gadget-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: gadget: patches for v3.9 merge window
finally getting rid of the old ->start()/->stop() methods
in favor of the better and improved ->udc_start()/->udc_stop().
There were surprisingly quite a few users left, but all of them
have been converted.
f_mass_storage removed some dead code, which is always great ;-)
There's also a big cleanup to the gadget framework from Sebastian
which gets us a lot closer to having only function drivers in
kernel and move over to configfs-based binding.
Other than these, there's the usual set of cleanups: s3c UDCs are
moving over to devm_regulator_bulk_get() API, at91_udc removed
an unnecessary check for work_pending() before scheduling and
there's the removal of an unused variable from uac2_pcm_trigger().
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 14625fd..6665d25 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -500,6 +500,15 @@
tristate
depends on USB_GADGET
+config USB_F_ACM
+ tristate
+
+config USB_F_SS_LB
+ tristate
+
+config USB_U_SERIAL
+ tristate
+
choice
tristate "USB Gadget Drivers"
default USB_ETH
@@ -524,6 +533,7 @@
config USB_ZERO
tristate "Gadget Zero (DEVELOPMENT)"
select USB_LIBCOMPOSITE
+ select USB_F_SS_LB
help
Gadget Zero is a two-configuration device. It either sinks and
sources bulk data; or it loops back a configurable number of
@@ -750,6 +760,8 @@
config USB_G_SERIAL
tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
+ select USB_U_SERIAL
+ select USB_F_ACM
select USB_LIBCOMPOSITE
help
The Serial Gadget talks to the Linux-USB generic serial driver.
@@ -803,6 +815,8 @@
tristate "CDC Composite Device (Ethernet and ACM)"
depends on NET
select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_F_ACM
help
This driver provides two functions in one configuration:
a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
@@ -818,6 +832,7 @@
tristate "Nokia composite gadget"
depends on PHONET
select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
help
The Nokia composite gadget provides support for acm, obex
and phonet in only one composite gadget driver.
@@ -829,6 +844,8 @@
tristate "CDC Composite Device (ACM and mass storage)"
depends on BLOCK
select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_F_ACM
help
This driver provides two functions in one configuration:
a mass storage, and a CDC ACM (serial port) link.
@@ -841,6 +858,8 @@
depends on BLOCK && NET
select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_F_ACM
help
The Multifunction Composite Gadget provides Ethernet (RNDIS
and/or CDC Ethernet), mass storage and ACM serial link
@@ -916,6 +935,7 @@
config USB_G_DBGP_SERIAL
depends on USB_G_DBGP
+ select USB_U_SERIAL
bool "serial"
help
Userland can interact using /dev/ttyGSxxx.
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 8b4acfd..97a13c3 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -6,7 +6,7 @@
obj-$(CONFIG_USB_GADGET) += udc-core.o
obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o
libcomposite-y := usbstring.o config.o epautoconf.o
-libcomposite-y += composite.o
+libcomposite-y += composite.o functions.o
obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
obj-$(CONFIG_USB_NET2272) += net2272.o
obj-$(CONFIG_USB_NET2280) += net2280.o
@@ -74,3 +74,9 @@
obj-$(CONFIG_USB_G_NCM) += g_ncm.o
obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
+
+# USB Functions
+obj-$(CONFIG_USB_F_ACM) += f_acm.o
+f_ss_lb-y := f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
+obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
index 5a7f289..8f2b0e3 100644
--- a/drivers/usb/gadget/acm_ms.c
+++ b/drivers/usb/gadget/acm_ms.c
@@ -40,9 +40,6 @@
* the runtime footprint, and giving us at least some parts of what
* a "gcc --combine ... part1.c part2.c part3.c ... " build would.
*/
-
-#include "u_serial.c"
-#include "f_acm.c"
#include "f_mass_storage.c"
/*-------------------------------------------------------------------------*/
@@ -112,12 +109,15 @@
static struct fsg_common fsg_common;
/*-------------------------------------------------------------------------*/
-
+static unsigned char tty_line;
+static struct usb_function *f_acm;
+static struct usb_function_instance *f_acm_inst;
/*
* We _always_ have both ACM and mass storage functions.
*/
static int __init acm_ms_do_config(struct usb_configuration *c)
{
+ struct f_serial_opts *opts;
int status;
if (gadget_is_otg(c->cdev->gadget)) {
@@ -125,16 +125,35 @@
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
+ f_acm_inst = usb_get_function_instance("acm");
+ if (IS_ERR(f_acm_inst))
+ return PTR_ERR(f_acm_inst);
- status = acm_bind_config(c, 0);
+ opts = container_of(f_acm_inst, struct f_serial_opts, func_inst);
+ opts->port_num = tty_line;
+
+ f_acm = usb_get_function(f_acm_inst);
+ if (IS_ERR(f_acm)) {
+ status = PTR_ERR(f_acm);
+ goto err_func;
+ }
+
+ status = usb_add_function(c, f_acm);
if (status < 0)
- return status;
+ goto err_conf;
status = fsg_bind_config(c->cdev, c, &fsg_common);
if (status < 0)
- return status;
+ goto err_fsg;
return 0;
+err_fsg:
+ usb_remove_function(c, f_acm);
+err_conf:
+ usb_put_function(f_acm);
+err_func:
+ usb_put_function_instance(f_acm_inst);
+ return status;
}
static struct usb_configuration acm_ms_config_driver = {
@@ -153,7 +172,7 @@
void *retp;
/* set up serial link layer */
- status = gserial_setup(cdev->gadget, 1);
+ status = gserial_alloc_line(&tty_line);
if (status < 0)
return status;
@@ -189,14 +208,15 @@
fail1:
fsg_common_put(&fsg_common);
fail0:
- gserial_cleanup();
+ gserial_free_line(tty_line);
return status;
}
static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
{
- gserial_cleanup();
-
+ usb_put_function(f_acm);
+ usb_put_function_instance(f_acm_inst);
+ gserial_free_line(tty_line);
return 0;
}
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index d9f6b93..75973f3 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1400,15 +1400,16 @@
return 0;
}
-static int amd5536_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int amd5536_stop(struct usb_gadget_driver *driver);
+static int amd5536_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
+static int amd5536_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
/* gadget operations */
static const struct usb_gadget_ops udc_ops = {
.wakeup = udc_wakeup,
.get_frame = udc_get_frame,
- .start = amd5536_start,
- .stop = amd5536_stop,
+ .udc_start = amd5536_udc_start,
+ .udc_stop = amd5536_udc_stop,
};
/* Setups endpoint parameters, adds endpoints to linked list */
@@ -1913,41 +1914,22 @@
}
/* Called by gadget driver to register itself */
-static int amd5536_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int amd5536_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct udc *dev = udc;
- int retval;
+ struct udc *dev = to_amd5536_udc(g);
u32 tmp;
- if (!driver || !bind || !driver->setup
- || driver->max_speed < USB_SPEED_HIGH)
- return -EINVAL;
- if (!dev)
- return -ENODEV;
- if (dev->driver)
- return -EBUSY;
-
driver->driver.bus = NULL;
dev->driver = driver;
dev->gadget.dev.driver = &driver->driver;
- retval = bind(&dev->gadget, driver);
-
/* Some gadget drivers use both ep0 directions.
* NOTE: to gadget driver, ep0 is just one endpoint...
*/
dev->ep[UDC_EP0OUT_IX].ep.driver_data =
dev->ep[UDC_EP0IN_IX].ep.driver_data;
- if (retval) {
- DBG(dev, "binding to %s returning %d\n",
- driver->driver.name, retval);
- dev->driver = NULL;
- dev->gadget.dev.driver = NULL;
- return retval;
- }
-
/* get ready for ep0 traffic */
setup_ep0(dev);
@@ -1969,14 +1951,9 @@
{
int tmp;
- if (dev->gadget.speed != USB_SPEED_UNKNOWN) {
- spin_unlock(&dev->lock);
- driver->disconnect(&dev->gadget);
- spin_lock(&dev->lock);
- }
-
/* empty queues and init hardware */
udc_basic_init(dev);
+
for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
empty_req_queue(&dev->ep[tmp]);
@@ -1984,23 +1961,18 @@
}
/* Called by gadget driver to unregister itself */
-static int amd5536_stop(struct usb_gadget_driver *driver)
+static int amd5536_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct udc *dev = udc;
- unsigned long flags;
+ struct udc *dev = to_amd5536_udc(g);
+ unsigned long flags;
u32 tmp;
- if (!dev)
- return -ENODEV;
- if (!driver || driver != dev->driver || !driver->unbind)
- return -EINVAL;
-
spin_lock_irqsave(&dev->lock, flags);
udc_mask_unused_interrupts(dev);
shutdown(dev, driver);
spin_unlock_irqrestore(&dev->lock, flags);
- driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
@@ -2009,9 +1981,6 @@
tmp |= AMD_BIT(UDC_DEVCTL_SD);
writel(tmp, &dev->regs->ctl);
-
- DBG(dev, "%s: unregistered\n", driver->driver.name);
-
return 0;
}
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index 14af87d..f1bf32e 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -563,6 +563,8 @@
u16 cur_alt;
};
+#define to_amd5536_udc(g) (container_of((g), struct udc, gadget))
+
/* setup request data */
union udc_setup_data {
u32 data[2];
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index f4a21f6..10f45fa 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1621,8 +1621,7 @@
* bus such as i2c or spi which may sleep, so schedule some work
* to read the vbus gpio
*/
- if (!work_pending(&udc->vbus_timer_work))
- schedule_work(&udc->vbus_timer_work);
+ schedule_work(&udc->vbus_timer_work);
}
static int at91_start(struct usb_gadget *gadget,
@@ -1739,7 +1738,7 @@
/* rm9200 needs manual D+ pullup; off by default */
if (cpu_is_at91rm9200()) {
- if (gpio_is_valid(udc->board.pullup_pin)) {
+ if (!gpio_is_valid(udc->board.pullup_pin)) {
DBG("no D+ pullup?\n");
retval = -ENODEV;
goto fail0;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 1e4bb77..a7d6f70 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -42,9 +42,6 @@
* the runtime footprint, and giving us at least some parts of what
* a "gcc --combine ... part1.c part2.c part3.c ... " build would.
*/
-
-#include "u_serial.c"
-#include "f_acm.c"
#include "f_ecm.c"
#include "u_ether.c"
@@ -108,12 +105,16 @@
static u8 hostaddr[ETH_ALEN];
/*-------------------------------------------------------------------------*/
+static struct usb_function *f_acm;
+static struct usb_function_instance *fi_serial;
+static unsigned char tty_line;
/*
* We _always_ have both CDC ECM and CDC ACM functions.
*/
static int __init cdc_do_config(struct usb_configuration *c)
{
+ struct f_serial_opts *opts;
int status;
if (gadget_is_otg(c->cdev->gadget)) {
@@ -125,11 +126,26 @@
if (status < 0)
return status;
- status = acm_bind_config(c, 0);
- if (status < 0)
- return status;
+ fi_serial = usb_get_function_instance("acm");
+ if (IS_ERR(fi_serial))
+ return PTR_ERR(fi_serial);
+ opts = container_of(fi_serial, struct f_serial_opts, func_inst);
+ opts->port_num = tty_line;
+
+ f_acm = usb_get_function(fi_serial);
+ if (IS_ERR(f_acm))
+ goto err_func_acm;
+
+ status = usb_add_function(c, f_acm);
+ if (status)
+ goto err_conf;
return 0;
+err_conf:
+ usb_put_function(f_acm);
+err_func_acm:
+ usb_put_function_instance(fi_serial);
+ return status;
}
static struct usb_configuration cdc_config_driver = {
@@ -158,7 +174,7 @@
return status;
/* set up serial link layer */
- status = gserial_setup(cdev->gadget, 1);
+ status = gserial_alloc_line(&tty_line);
if (status < 0)
goto fail0;
@@ -184,7 +200,7 @@
return 0;
fail1:
- gserial_cleanup();
+ gserial_free_line(tty_line);
fail0:
gether_cleanup();
return status;
@@ -192,7 +208,9 @@
static int __exit cdc_unbind(struct usb_composite_dev *cdev)
{
- gserial_cleanup();
+ usb_put_function(f_acm);
+ usb_put_function_instance(fi_serial);
+ gserial_free_line(tty_line);
gether_cleanup();
return 0;
}
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 2a6bfe7..7c821de 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -28,6 +28,12 @@
* with the relevant device-wide data.
*/
+static struct usb_gadget_strings **get_containers_gs(
+ struct usb_gadget_string_container *uc)
+{
+ return (struct usb_gadget_strings **)uc->stash;
+}
+
/**
* next_ep_desc() - advance to the next EP descriptor
* @t: currect pointer within descriptor array
@@ -215,6 +221,18 @@
}
EXPORT_SYMBOL_GPL(usb_add_function);
+void usb_remove_function(struct usb_configuration *c, struct usb_function *f)
+{
+ if (f->disable)
+ f->disable(f);
+
+ bitmap_zero(f->endpoints, 32);
+ list_del(&f->list);
+ if (f->unbind)
+ f->unbind(c, f);
+}
+EXPORT_SYMBOL_GPL(usb_remove_function);
+
/**
* usb_function_deactivate - prevent function and gadget enumeration
* @function: the function that isn't yet ready to respond
@@ -320,6 +338,25 @@
}
EXPORT_SYMBOL_GPL(usb_interface_id);
+static u8 encode_bMaxPower(enum usb_device_speed speed,
+ struct usb_configuration *c)
+{
+ unsigned val;
+
+ if (c->MaxPower)
+ val = c->MaxPower;
+ else
+ val = CONFIG_USB_GADGET_VBUS_DRAW;
+ if (!val)
+ return 0;
+ switch (speed) {
+ case USB_SPEED_SUPER:
+ return DIV_ROUND_UP(val, 8);
+ default:
+ return DIV_ROUND_UP(val, 2);
+ };
+}
+
static int config_buf(struct usb_configuration *config,
enum usb_device_speed speed, void *buf, u8 type)
{
@@ -339,7 +376,7 @@
c->bConfigurationValue = config->bConfigurationValue;
c->iConfiguration = config->iConfiguration;
c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
- c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2);
+ c->bMaxPower = encode_bMaxPower(speed, config);
/* There may be e.g. OTG descriptors */
if (config->descriptors) {
@@ -656,7 +693,7 @@
}
/* when we return, be sure our power usage is valid */
- power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW;
+ power = c->MaxPower ? c->MaxPower : CONFIG_USB_GADGET_VBUS_DRAW;
done:
usb_gadget_vbus_draw(gadget, power);
if (result >= 0 && cdev->delayed_status)
@@ -664,6 +701,31 @@
return result;
}
+int usb_add_config_only(struct usb_composite_dev *cdev,
+ struct usb_configuration *config)
+{
+ struct usb_configuration *c;
+
+ if (!config->bConfigurationValue)
+ return -EINVAL;
+
+ /* Prevent duplicate configuration identifiers */
+ list_for_each_entry(c, &cdev->configs, list) {
+ if (c->bConfigurationValue == config->bConfigurationValue)
+ return -EBUSY;
+ }
+
+ config->cdev = cdev;
+ list_add_tail(&config->list, &cdev->configs);
+
+ INIT_LIST_HEAD(&config->functions);
+ config->next_interface_id = 0;
+ memset(config->interface, 0, sizeof(config->interface));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_add_config_only);
+
/**
* usb_add_config() - add a configuration to a device.
* @cdev: wraps the USB gadget
@@ -684,30 +746,18 @@
int (*bind)(struct usb_configuration *))
{
int status = -EINVAL;
- struct usb_configuration *c;
+
+ if (!bind)
+ goto done;
DBG(cdev, "adding config #%u '%s'/%p\n",
config->bConfigurationValue,
config->label, config);
- if (!config->bConfigurationValue || !bind)
+ status = usb_add_config_only(cdev, config);
+ if (status)
goto done;
- /* Prevent duplicate configuration identifiers */
- list_for_each_entry(c, &cdev->configs, list) {
- if (c->bConfigurationValue == config->bConfigurationValue) {
- status = -EBUSY;
- goto done;
- }
- }
-
- config->cdev = cdev;
- list_add_tail(&config->list, &cdev->configs);
-
- INIT_LIST_HEAD(&config->functions);
- config->next_interface_id = 0;
- memset(config->interface, 0, sizeof(config->interface));
-
status = bind(config);
if (status < 0) {
while (!list_empty(&config->functions)) {
@@ -860,6 +910,7 @@
void *buf, u16 language, int id)
{
struct usb_composite_driver *composite = cdev->driver;
+ struct usb_gadget_string_container *uc;
struct usb_configuration *c;
struct usb_function *f;
int len;
@@ -892,6 +943,12 @@
collect_langs(sp, s->wData);
}
}
+ list_for_each_entry(uc, &cdev->gstrings, list) {
+ struct usb_gadget_strings **sp;
+
+ sp = get_containers_gs(uc);
+ collect_langs(sp, s->wData);
+ }
for (len = 0; len <= 126 && s->wData[len]; len++)
continue;
@@ -902,6 +959,15 @@
return s->bLength;
}
+ list_for_each_entry(uc, &cdev->gstrings, list) {
+ struct usb_gadget_strings **sp;
+
+ sp = get_containers_gs(uc);
+ len = lookup_string(sp, buf, language, id);
+ if (len > 0)
+ return len;
+ }
+
/* String IDs are device-scoped, so we look up each string
* table we're told about. These lookups are infrequent;
* simpler-is-better here.
@@ -987,6 +1053,119 @@
}
EXPORT_SYMBOL_GPL(usb_string_ids_tab);
+static struct usb_gadget_string_container *copy_gadget_strings(
+ struct usb_gadget_strings **sp, unsigned n_gstrings,
+ unsigned n_strings)
+{
+ struct usb_gadget_string_container *uc;
+ struct usb_gadget_strings **gs_array;
+ struct usb_gadget_strings *gs;
+ struct usb_string *s;
+ unsigned mem;
+ unsigned n_gs;
+ unsigned n_s;
+ void *stash;
+
+ mem = sizeof(*uc);
+ mem += sizeof(void *) * (n_gstrings + 1);
+ mem += sizeof(struct usb_gadget_strings) * n_gstrings;
+ mem += sizeof(struct usb_string) * (n_strings + 1) * (n_gstrings);
+ uc = kmalloc(mem, GFP_KERNEL);
+ if (!uc)
+ return ERR_PTR(-ENOMEM);
+ gs_array = get_containers_gs(uc);
+ stash = uc->stash;
+ stash += sizeof(void *) * (n_gstrings + 1);
+ for (n_gs = 0; n_gs < n_gstrings; n_gs++) {
+ struct usb_string *org_s;
+
+ gs_array[n_gs] = stash;
+ gs = gs_array[n_gs];
+ stash += sizeof(struct usb_gadget_strings);
+ gs->language = sp[n_gs]->language;
+ gs->strings = stash;
+ org_s = sp[n_gs]->strings;
+
+ for (n_s = 0; n_s < n_strings; n_s++) {
+ s = stash;
+ stash += sizeof(struct usb_string);
+ if (org_s->s)
+ s->s = org_s->s;
+ else
+ s->s = "";
+ org_s++;
+ }
+ s = stash;
+ s->s = NULL;
+ stash += sizeof(struct usb_string);
+
+ }
+ gs_array[n_gs] = NULL;
+ return uc;
+}
+
+/**
+ * usb_gstrings_attach() - attach gadget strings to a cdev and assign ids
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * and attached.
+ * @sp: an array of usb_gadget_strings to attach.
+ * @n_strings: number of entries in each usb_strings array (sp[]->strings)
+ *
+ * This function will create a deep copy of usb_gadget_strings and usb_string
+ * and attach it to the cdev. The actual string (usb_string.s) will not be
+ * copied but only a referenced will be made. The struct usb_gadget_strings
+ * array may contain multiple languges and should be NULL terminated.
+ * The ->language pointer of each struct usb_gadget_strings has to contain the
+ * same amount of entries.
+ * For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first
+ * usb_string entry of es-ES containts the translation of the first usb_string
+ * entry of en-US. Therefore both entries become the same id assign.
+ */
+struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
+ struct usb_gadget_strings **sp, unsigned n_strings)
+{
+ struct usb_gadget_string_container *uc;
+ struct usb_gadget_strings **n_gs;
+ unsigned n_gstrings = 0;
+ unsigned i;
+ int ret;
+
+ for (i = 0; sp[i]; i++)
+ n_gstrings++;
+
+ if (!n_gstrings)
+ return ERR_PTR(-EINVAL);
+
+ uc = copy_gadget_strings(sp, n_gstrings, n_strings);
+ if (IS_ERR(uc))
+ return ERR_PTR(PTR_ERR(uc));
+
+ n_gs = get_containers_gs(uc);
+ ret = usb_string_ids_tab(cdev, n_gs[0]->strings);
+ if (ret)
+ goto err;
+
+ for (i = 1; i < n_gstrings; i++) {
+ struct usb_string *m_s;
+ struct usb_string *s;
+ unsigned n;
+
+ m_s = n_gs[0]->strings;
+ s = n_gs[i]->strings;
+ for (n = 0; n < n_strings; n++) {
+ s->id = m_s->id;
+ s++;
+ m_s++;
+ }
+ }
+ list_add_tail(&uc->list, &cdev->gstrings);
+ return n_gs[0]->strings;
+err:
+ kfree(uc);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(usb_gstrings_attach);
+
/**
* usb_string_ids_n() - allocate unused string IDs in batch
* @c: the device whose string descriptor IDs are being allocated
@@ -1033,7 +1212,7 @@
* housekeeping for the gadget function we're implementing. Most of
* the work is in config and function specific setup.
*/
-static int
+int
composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
{
struct usb_composite_dev *cdev = get_gadget_data(gadget);
@@ -1300,7 +1479,7 @@
return value;
}
-static void composite_disconnect(struct usb_gadget *gadget)
+void composite_disconnect(struct usb_gadget *gadget)
{
struct usb_composite_dev *cdev = get_gadget_data(gadget);
unsigned long flags;
@@ -1330,8 +1509,7 @@
static DEVICE_ATTR(suspended, 0444, composite_show_suspended, NULL);
-static void
-composite_unbind(struct usb_gadget *gadget)
+static void __composite_unbind(struct usb_gadget *gadget, bool unbind_driver)
{
struct usb_composite_dev *cdev = get_gadget_data(gadget);
@@ -1348,19 +1526,21 @@
struct usb_configuration, list);
remove_config(cdev, c);
}
- if (cdev->driver->unbind)
+ if (cdev->driver->unbind && unbind_driver)
cdev->driver->unbind(cdev);
- if (cdev->req) {
- kfree(cdev->req->buf);
- usb_ep_free_request(gadget->ep0, cdev->req);
- }
- device_remove_file(&gadget->dev, &dev_attr_suspended);
+ composite_dev_cleanup(cdev);
+
kfree(cdev->def_manufacturer);
kfree(cdev);
set_gadget_data(gadget, NULL);
}
+static void composite_unbind(struct usb_gadget *gadget)
+{
+ __composite_unbind(gadget, true);
+}
+
static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
const struct usb_device_descriptor *old)
{
@@ -1399,34 +1579,25 @@
new->iProduct = iProduct;
}
-static struct usb_composite_driver *to_cdriver(struct usb_gadget_driver *gdrv)
+int composite_dev_prepare(struct usb_composite_driver *composite,
+ struct usb_composite_dev *cdev)
{
- return container_of(gdrv, struct usb_composite_driver, gadget_driver);
-}
-
-static int composite_bind(struct usb_gadget *gadget,
- struct usb_gadget_driver *gdriver)
-{
- struct usb_composite_dev *cdev;
- struct usb_composite_driver *composite = to_cdriver(gdriver);
- int status = -ENOMEM;
-
- cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
- if (!cdev)
- return status;
-
- spin_lock_init(&cdev->lock);
- cdev->gadget = gadget;
- set_gadget_data(gadget, cdev);
- INIT_LIST_HEAD(&cdev->configs);
+ struct usb_gadget *gadget = cdev->gadget;
+ int ret = -ENOMEM;
/* preallocate control response and buffer */
cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
if (!cdev->req)
- goto fail;
+ return -ENOMEM;
+
cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL);
if (!cdev->req->buf)
goto fail;
+
+ ret = device_create_file(&gadget->dev, &dev_attr_suspended);
+ if (ret)
+ goto fail_dev;
+
cdev->req->complete = composite_setup_complete;
gadget->ep0->driver_data = cdev;
@@ -1444,7 +1615,51 @@
* we force endpoints to start unassigned; few controller
* drivers will zero ep->driver_data.
*/
- usb_ep_autoconfig_reset(cdev->gadget);
+ usb_ep_autoconfig_reset(gadget);
+ return 0;
+fail_dev:
+ kfree(cdev->req->buf);
+fail:
+ usb_ep_free_request(gadget->ep0, cdev->req);
+ cdev->req = NULL;
+ return ret;
+}
+
+void composite_dev_cleanup(struct usb_composite_dev *cdev)
+{
+ struct usb_gadget_string_container *uc, *tmp;
+
+ list_for_each_entry_safe(uc, tmp, &cdev->gstrings, list) {
+ list_del(&uc->list);
+ kfree(uc);
+ }
+ if (cdev->req) {
+ kfree(cdev->req->buf);
+ usb_ep_free_request(cdev->gadget->ep0, cdev->req);
+ }
+ device_remove_file(&cdev->gadget->dev, &dev_attr_suspended);
+}
+
+static int composite_bind(struct usb_gadget *gadget,
+ struct usb_gadget_driver *gdriver)
+{
+ struct usb_composite_dev *cdev;
+ struct usb_composite_driver *composite = to_cdriver(gdriver);
+ int status = -ENOMEM;
+
+ cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
+ if (!cdev)
+ return status;
+
+ spin_lock_init(&cdev->lock);
+ cdev->gadget = gadget;
+ set_gadget_data(gadget, cdev);
+ INIT_LIST_HEAD(&cdev->configs);
+ INIT_LIST_HEAD(&cdev->gstrings);
+
+ status = composite_dev_prepare(composite, cdev);
+ if (status)
+ goto fail;
/* composite gadget needs to assign strings for whole device (like
* serial number), register function drivers, potentially update
@@ -1460,16 +1675,11 @@
if (composite->needs_serial && !cdev->desc.iSerialNumber)
WARNING(cdev, "userspace failed to provide iSerialNumber\n");
- /* finish up */
- status = device_create_file(&gadget->dev, &dev_attr_suspended);
- if (status)
- goto fail;
-
INFO(cdev, "%s ready\n", composite->name);
return 0;
fail:
- composite_unbind(gadget);
+ __composite_unbind(gadget, false);
return status;
}
@@ -1518,10 +1728,10 @@
f->resume(f);
}
- maxpower = cdev->config->bMaxPower;
+ maxpower = cdev->config->MaxPower;
usb_gadget_vbus_draw(gadget, maxpower ?
- (2 * maxpower) : CONFIG_USB_GADGET_VBUS_DRAW);
+ maxpower : CONFIG_USB_GADGET_VBUS_DRAW);
}
cdev->suspended = 0;
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index 87d1650..986fc51 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -13,9 +13,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#ifdef CONFIG_USB_G_DBGP_SERIAL
-#include "u_serial.c"
-#endif
+#include "u_serial.h"
#define DRIVER_VENDOR_ID 0x0525 /* NetChip */
#define DRIVER_PRODUCT_ID 0xc0de /* undefined */
@@ -233,6 +231,10 @@
gadget->ep0->driver_data = NULL;
}
+#ifdef CONFIG_USB_G_DBGP_SERIAL
+static unsigned char tty_line;
+#endif
+
static int __init dbgp_configure_endpoints(struct usb_gadget *gadget)
{
int stp;
@@ -270,7 +272,7 @@
dbgp.serial->in->desc = &i_desc;
dbgp.serial->out->desc = &o_desc;
- if (gserial_setup(gadget, 1) < 0) {
+ if (gserial_alloc_line(&tty_line)) {
stp = 3;
goto fail_3;
}
@@ -379,7 +381,7 @@
#ifdef CONFIG_USB_G_DBGP_PRINTK
err = dbgp_enable_ep();
#else
- err = gserial_connect(dbgp.serial, 0);
+ err = gserial_connect(dbgp.serial, tty_line);
#endif
if (err < 0)
goto fail;
@@ -422,7 +424,7 @@
{
usb_gadget_unregister_driver(&dbgp_driver);
#ifdef CONFIG_USB_G_DBGP_SERIAL
- gserial_cleanup();
+ gserial_free_line(tty_line);
#endif
}
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 5491744..1ae180b 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -16,7 +16,9 @@
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/device.h>
+#include <linux/err.h>
#include "u_serial.h"
#include "gadget_chips.h"
@@ -283,7 +285,6 @@
[ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)",
[ACM_DATA_IDX].s = "CDC ACM Data",
[ACM_IAD_IDX ].s = "CDC Serial",
- { /* ZEROES END LIST */ },
};
static struct usb_gadget_strings acm_string_table = {
@@ -605,9 +606,23 @@
{
struct usb_composite_dev *cdev = c->cdev;
struct f_acm *acm = func_to_acm(f);
+ struct usb_string *us;
int status;
struct usb_ep *ep;
+ /* REVISIT might want instance-specific strings to help
+ * distinguish instances ...
+ */
+
+ /* maybe allocate device-global string IDs, and patch descriptors */
+ us = usb_gstrings_attach(cdev, acm_strings,
+ ARRAY_SIZE(acm_string_defs));
+ if (IS_ERR(us))
+ return PTR_ERR(us);
+ acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id;
+ acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id;
+ acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id;
+
/* allocate instance-specific interface IDs, and patch descriptors */
status = usb_interface_id(c, f);
if (status < 0)
@@ -700,24 +715,42 @@
return status;
}
+static struct f_acm *acm_alloc_basic_func(void)
+{
+ struct f_acm *acm;
+
+ acm = kzalloc(sizeof(*acm), GFP_KERNEL);
+ if (!acm)
+ return NULL;
+
+ spin_lock_init(&acm->lock);
+
+ acm->port.connect = acm_connect;
+ acm->port.disconnect = acm_disconnect;
+ acm->port.send_break = acm_send_break;
+
+ acm->port.func.name = "acm";
+ /* descriptors are per-instance copies */
+ acm->port.func.bind = acm_bind;
+ acm->port.func.set_alt = acm_set_alt;
+ acm->port.func.setup = acm_setup;
+ acm->port.func.disable = acm_disable;
+
+ return acm;
+}
+
+#ifdef USB_FACM_INCLUDED
static void
-acm_unbind(struct usb_configuration *c, struct usb_function *f)
+acm_old_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
- acm_string_defs[0].id = 0;
usb_free_all_descriptors(f);
- gs_free_req(acm->notify, acm->notify_req);
+ if (acm->notify_req)
+ gs_free_req(acm->notify, acm->notify_req);
kfree(acm);
}
-/* Some controllers can't support CDC ACM ... */
-static inline bool can_support_cdc(struct usb_configuration *c)
-{
- /* everything else is *probably* fine ... */
- return true;
-}
-
/**
* acm_bind_config - add a CDC ACM function to a configuration
* @c: the configuration to support the CDC ACM instance
@@ -726,58 +759,80 @@
*
* Returns zero on success, else negative errno.
*
- * Caller must have called @gserial_setup() with enough ports to
- * handle all the ones it binds. Caller is also responsible
- * for calling @gserial_cleanup() before module unload.
*/
int acm_bind_config(struct usb_configuration *c, u8 port_num)
{
struct f_acm *acm;
int status;
- if (!can_support_cdc(c))
- return -EINVAL;
-
- /* REVISIT might want instance-specific strings to help
- * distinguish instances ...
- */
-
- /* maybe allocate device-global string IDs, and patch descriptors */
- if (acm_string_defs[0].id == 0) {
- status = usb_string_ids_tab(c->cdev, acm_string_defs);
- if (status < 0)
- return status;
- acm_control_interface_desc.iInterface =
- acm_string_defs[ACM_CTRL_IDX].id;
- acm_data_interface_desc.iInterface =
- acm_string_defs[ACM_DATA_IDX].id;
- acm_iad_descriptor.iFunction = acm_string_defs[ACM_IAD_IDX].id;
- }
-
/* allocate and initialize one new instance */
- acm = kzalloc(sizeof *acm, GFP_KERNEL);
+ acm = acm_alloc_basic_func();
if (!acm)
return -ENOMEM;
- spin_lock_init(&acm->lock);
-
acm->port_num = port_num;
-
- acm->port.connect = acm_connect;
- acm->port.disconnect = acm_disconnect;
- acm->port.send_break = acm_send_break;
-
- acm->port.func.name = "acm";
- acm->port.func.strings = acm_strings;
- /* descriptors are per-instance copies */
- acm->port.func.bind = acm_bind;
- acm->port.func.unbind = acm_unbind;
- acm->port.func.set_alt = acm_set_alt;
- acm->port.func.setup = acm_setup;
- acm->port.func.disable = acm_disable;
+ acm->port.func.unbind = acm_old_unbind;
status = usb_add_function(c, &acm->port.func);
if (status)
kfree(acm);
return status;
}
+
+#else
+
+static void acm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct f_acm *acm = func_to_acm(f);
+
+ acm_string_defs[0].id = 0;
+ usb_free_all_descriptors(f);
+ if (acm->notify_req)
+ gs_free_req(acm->notify, acm->notify_req);
+}
+
+static void acm_free_func(struct usb_function *f)
+{
+ struct f_acm *acm = func_to_acm(f);
+
+ kfree(acm);
+}
+
+static struct usb_function *acm_alloc_func(struct usb_function_instance *fi)
+{
+ struct f_serial_opts *opts;
+ struct f_acm *acm;
+
+ acm = acm_alloc_basic_func();
+ if (!acm)
+ return ERR_PTR(-ENOMEM);
+
+ opts = container_of(fi, struct f_serial_opts, func_inst);
+ acm->port_num = opts->port_num;
+ acm->port.func.unbind = acm_unbind;
+ acm->port.func.free_func = acm_free_func;
+
+ return &acm->port.func;
+}
+
+static void acm_free_instance(struct usb_function_instance *fi)
+{
+ struct f_serial_opts *opts;
+
+ opts = container_of(fi, struct f_serial_opts, func_inst);
+ kfree(opts);
+}
+
+static struct usb_function_instance *acm_alloc_instance(void)
+{
+ struct f_serial_opts *opts;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+ opts->func_inst.free_func_inst = acm_free_instance;
+ return &opts->func_inst;
+}
+DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func);
+MODULE_LICENSE("GPL");
+#endif
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 4a6961c..449186c 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1103,8 +1103,8 @@
return 0;
for (;;) {
- char *end, *eq, *comma;
unsigned long value;
+ char *eq, *comma;
/* Option limit */
comma = strchr(opts, ',');
@@ -1120,8 +1120,7 @@
*eq = 0;
/* Parse value */
- value = simple_strtoul(eq + 1, &end, 0);
- if (unlikely(*end != ',' && *end != 0)) {
+ if (kstrtoul(eq + 1, 0, &value)) {
pr_err("%s: invalid value: %s\n", opts, eq + 1);
return -EINVAL;
}
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index bb39cb2..4a3873a 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -15,10 +15,11 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/usb/composite.h>
#include "g_zero.h"
-#include "gadget_chips.h"
-
/*
* LOOPBACK FUNCTION ... a testing vehicle for USB peripherals,
@@ -44,9 +45,8 @@
return container_of(f, struct f_loopback, function);
}
-static unsigned qlen = 32;
-module_param(qlen, uint, 0);
-MODULE_PARM_DESC(qlenn, "depth of loopback queue");
+static unsigned qlen;
+static unsigned buflen;
/*-------------------------------------------------------------------------*/
@@ -171,8 +171,7 @@
/*-------------------------------------------------------------------------*/
-static int __init
-loopback_bind(struct usb_configuration *c, struct usb_function *f)
+static int loopback_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_loopback *loop = func_to_loop(f);
@@ -185,6 +184,12 @@
return id;
loopback_intf.bInterfaceNumber = id;
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_loopback[0].id = id;
+ loopback_intf.iInterface = id;
+
/* allocate endpoints */
loop->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_loop_source_desc);
@@ -223,8 +228,7 @@
return 0;
}
-static void
-loopback_unbind(struct usb_configuration *c, struct usb_function *f)
+static void lb_free_func(struct usb_function *f)
{
usb_free_all_descriptors(f);
kfree(func_to_loop(f));
@@ -366,63 +370,64 @@
disable_loopback(loop);
}
-/*-------------------------------------------------------------------------*/
-
-static int __init loopback_bind_config(struct usb_configuration *c)
+static struct usb_function *loopback_alloc(struct usb_function_instance *fi)
{
struct f_loopback *loop;
- int status;
+ struct f_lb_opts *lb_opts;
loop = kzalloc(sizeof *loop, GFP_KERNEL);
if (!loop)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
+
+ lb_opts = container_of(fi, struct f_lb_opts, func_inst);
+ buflen = lb_opts->bulk_buflen;
+ qlen = lb_opts->qlen;
+ if (!qlen)
+ qlen = 32;
loop->function.name = "loopback";
loop->function.bind = loopback_bind;
- loop->function.unbind = loopback_unbind;
loop->function.set_alt = loopback_set_alt;
loop->function.disable = loopback_disable;
+ loop->function.strings = loopback_strings;
- status = usb_add_function(c, &loop->function);
- if (status)
- kfree(loop);
- return status;
+ loop->function.free_func = lb_free_func;
+
+ return &loop->function;
}
-static struct usb_configuration loopback_driver = {
- .label = "loopback",
- .strings = loopback_strings,
- .bConfigurationValue = 2,
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- /* .iConfiguration = DYNAMIC */
-};
-
-/**
- * loopback_add - add a loopback testing configuration to a device
- * @cdev: the device to support the loopback configuration
- */
-int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume)
+static void lb_free_instance(struct usb_function_instance *fi)
{
- int id;
+ struct f_lb_opts *lb_opts;
- /* allocate string ID(s) */
- id = usb_string_id(cdev);
- if (id < 0)
- return id;
- strings_loopback[0].id = id;
-
- loopback_intf.iInterface = id;
- loopback_driver.iConfiguration = id;
-
- /* support autoresume for remote wakeup testing */
- if (autoresume)
- loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
-
- /* support OTG systems */
- if (gadget_is_otg(cdev->gadget)) {
- loopback_driver.descriptors = otg_desc;
- loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- }
-
- return usb_add_config(cdev, &loopback_driver, loopback_bind_config);
+ lb_opts = container_of(fi, struct f_lb_opts, func_inst);
+ kfree(lb_opts);
}
+
+static struct usb_function_instance *loopback_alloc_instance(void)
+{
+ struct f_lb_opts *lb_opts;
+
+ lb_opts = kzalloc(sizeof(*lb_opts), GFP_KERNEL);
+ if (!lb_opts)
+ return ERR_PTR(-ENOMEM);
+ lb_opts->func_inst.free_func_inst = lb_free_instance;
+ return &lb_opts->func_inst;
+}
+DECLARE_USB_FUNCTION(Loopback, loopback_alloc_instance, loopback_alloc);
+
+int __init lb_modinit(void)
+{
+ int ret;
+
+ ret = usb_function_register(&Loopbackusb_func);
+ if (ret)
+ return ret;
+ return ret;
+}
+void __exit lb_modexit(void)
+{
+ usb_function_unregister(&Loopbackusb_func);
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 5d027b3..fc5c16c 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -246,20 +246,6 @@
* set).
*/
int (*thread_exits)(struct fsg_common *common);
-
- /*
- * Called prior to ejection. Negative return means error,
- * zero means to continue with ejection, positive means not to
- * eject.
- */
- int (*pre_eject)(struct fsg_common *common,
- struct fsg_lun *lun, int num);
- /*
- * Called after ejection. Negative return means error, zero
- * or positive is just a success.
- */
- int (*post_eject)(struct fsg_common *common,
- struct fsg_lun *lun, int num);
};
/* Data shared by all the FSG instances. */
@@ -1374,26 +1360,13 @@
if (!loej)
return 0;
- /* Simulate an unload/eject */
- if (common->ops && common->ops->pre_eject) {
- int r = common->ops->pre_eject(common, curlun,
- curlun - common->luns);
- if (unlikely(r < 0))
- return r;
- else if (r)
- return 0;
- }
-
up_read(&common->filesem);
down_write(&common->filesem);
fsg_lun_close(curlun);
up_write(&common->filesem);
down_read(&common->filesem);
- return common->ops && common->ops->post_eject
- ? min(0, common->ops->post_eject(common, curlun,
- curlun - common->luns))
- : 0;
+ return 0;
}
static int do_prevent_allow(struct fsg_common *common)
@@ -1718,7 +1691,7 @@
int needs_medium, const char *name)
{
int i;
- int lun = common->cmnd[1] >> 5;
+ unsigned int lun = common->cmnd[1] >> 5;
static const char dirletter[4] = {'u', 'o', 'i', 'n'};
char hdlen[20];
struct fsg_lun *curlun;
@@ -1784,7 +1757,7 @@
/* Check that the LUN values are consistent */
if (common->lun != lun)
- DBG(common, "using LUN %d from CBW, not LUN %d from CDB\n",
+ DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n",
common->lun, lun);
/* Check the LUN */
@@ -1804,7 +1777,7 @@
*/
if (common->cmnd[0] != INQUIRY &&
common->cmnd[0] != REQUEST_SENSE) {
- DBG(common, "unsupported LUN %d\n", common->lun);
+ DBG(common, "unsupported LUN %u\n", common->lun);
return -EINVAL;
}
}
@@ -2196,7 +2169,7 @@
if (common->data_size == 0)
common->data_dir = DATA_DIR_NONE;
common->lun = cbw->Lun;
- if (common->lun >= 0 && common->lun < common->nluns)
+ if (common->lun < common->nluns)
common->curlun = &common->luns[common->lun];
else
common->curlun = NULL;
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 6c8362f..5e7557e 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -56,8 +56,9 @@
u8 notify_state;
bool is_open;
- struct ndp_parser_opts *parser_opts;
+ const struct ndp_parser_opts *parser_opts;
bool is_crc;
+ u32 ndp_sign;
/*
* for notification, it is accessed from both
@@ -390,8 +391,8 @@
.next_fp_index = 2, \
}
-static struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS;
-static struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS;
+static const struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS;
+static const struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS;
static inline void put_ncm(__le16 **p, unsigned size, unsigned val)
{
@@ -732,8 +733,7 @@
default:
goto invalid;
}
- ncm->parser_opts->ndp_sign &= ~NCM_NDP_HDR_CRC_MASK;
- ncm->parser_opts->ndp_sign |= ndp_hdr_crc;
+ ncm->ndp_sign = ncm->parser_opts->ndp_sign | ndp_hdr_crc;
value = 0;
break;
}
@@ -875,7 +875,7 @@
int ndp_align;
int ndp_pad;
unsigned max_size = ncm->port.fixed_in_len;
- struct ndp_parser_opts *opts = ncm->parser_opts;
+ const struct ndp_parser_opts *opts = ncm->parser_opts;
unsigned crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
div = le16_to_cpu(ntb_parameters.wNdpInDivisor);
@@ -921,7 +921,7 @@
tmp = (void *)tmp + ndp_pad;
/* NDP */
- put_unaligned_le32(opts->ndp_sign, tmp); /* dwSignature */
+ put_unaligned_le32(ncm->ndp_sign, tmp); /* dwSignature */
tmp += 2;
/* wLength */
put_unaligned_le16(ncb_len - opts->nth_size - pad, tmp++);
@@ -965,7 +965,7 @@
struct sk_buff *skb2;
int ret = -EINVAL;
unsigned max_size = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize);
- struct ndp_parser_opts *opts = ncm->parser_opts;
+ const struct ndp_parser_opts *opts = ncm->parser_opts;
unsigned crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
int dgram_counter;
@@ -1002,7 +1002,7 @@
/* walk through NDP */
tmp = ((void *)skb->data) + index;
- if (get_unaligned_le32(tmp) != opts->ndp_sign) {
+ if (get_unaligned_le32(tmp) != ncm->ndp_sign) {
INFO(port->func.config->cdev, "Wrong NDP SIGN\n");
goto err;
}
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index d8dd878..36a0045 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -406,10 +406,6 @@
* Context: single threaded during gadget setup
*
* Returns zero on success, else negative errno.
- *
- * Caller must have called @gserial_setup() with enough ports to
- * handle all the ones it binds. Caller is also responsible
- * for calling @gserial_cleanup() before module unload.
*/
int __init obex_bind_config(struct usb_configuration *c, u8 port_num)
{
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 98fa779..da33cfb 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -260,10 +260,6 @@
* Context: single threaded during gadget setup
*
* Returns zero on success, else negative errno.
- *
- * Caller must have called @gserial_setup() with enough ports to
- * handle all the ones it binds. Caller is also responsible
- * for calling @gserial_cleanup() before module unload.
*/
int __init gser_bind_config(struct usb_configuration *c, u8 port_num)
{
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 102d49b..41adf3e 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -16,11 +16,12 @@
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/usb/composite.h>
+#include <linux/err.h>
#include "g_zero.h"
#include "gadget_chips.h"
-
/*
* SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral
* controller drivers.
@@ -62,24 +63,11 @@
}
static unsigned pattern;
-module_param(pattern, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none");
-
-static unsigned isoc_interval = 4;
-module_param(isoc_interval, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(isoc_interval, "1 - 16");
-
-static unsigned isoc_maxpacket = 1024;
-module_param(isoc_maxpacket, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
-
+static unsigned isoc_interval;
+static unsigned isoc_maxpacket;
static unsigned isoc_mult;
-module_param(isoc_mult, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)");
-
static unsigned isoc_maxburst;
-module_param(isoc_maxburst, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)");
+static unsigned buflen;
/*-------------------------------------------------------------------------*/
@@ -313,7 +301,57 @@
/*-------------------------------------------------------------------------*/
-static int __init
+struct usb_request *alloc_ep_req(struct usb_ep *ep, int len)
+{
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+ if (req) {
+ if (len)
+ req->length = len;
+ else
+ req->length = buflen;
+ req->buf = kmalloc(req->length, GFP_ATOMIC);
+ if (!req->buf) {
+ usb_ep_free_request(ep, req);
+ req = NULL;
+ }
+ }
+ return req;
+}
+
+void free_ep_req(struct usb_ep *ep, struct usb_request *req)
+{
+ kfree(req->buf);
+ usb_ep_free_request(ep, req);
+}
+
+static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
+{
+ int value;
+
+ if (ep->driver_data) {
+ value = usb_ep_disable(ep);
+ if (value < 0)
+ DBG(cdev, "disable %s --> %d\n",
+ ep->name, value);
+ ep->driver_data = NULL;
+ }
+}
+
+void disable_endpoints(struct usb_composite_dev *cdev,
+ struct usb_ep *in, struct usb_ep *out,
+ struct usb_ep *iso_in, struct usb_ep *iso_out)
+{
+ disable_ep(cdev, in);
+ disable_ep(cdev, out);
+ if (iso_in)
+ disable_ep(cdev, iso_in);
+ if (iso_out)
+ disable_ep(cdev, iso_out);
+}
+
+static int
sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
@@ -450,7 +488,7 @@
}
static void
-sourcesink_unbind(struct usb_configuration *c, struct usb_function *f)
+sourcesink_free_func(struct usb_function *f)
{
usb_free_all_descriptors(f);
kfree(func_to_ss(f));
@@ -531,8 +569,7 @@
check_read_data(ss, req);
if (pattern != 2)
memset(req->buf, 0x55, req->length);
- } else
- reinit_write_data(ep, req);
+ }
break;
/* this endpoint is normally active while we're configured */
@@ -758,31 +795,10 @@
/*-------------------------------------------------------------------------*/
-static int __init sourcesink_bind_config(struct usb_configuration *c)
-{
- struct f_sourcesink *ss;
- int status;
-
- ss = kzalloc(sizeof *ss, GFP_KERNEL);
- if (!ss)
- return -ENOMEM;
-
- ss->function.name = "source/sink";
- ss->function.bind = sourcesink_bind;
- ss->function.unbind = sourcesink_unbind;
- ss->function.set_alt = sourcesink_set_alt;
- ss->function.get_alt = sourcesink_get_alt;
- ss->function.disable = sourcesink_disable;
-
- status = usb_add_function(c, &ss->function);
- if (status)
- kfree(ss);
- return status;
-}
-
-static int sourcesink_setup(struct usb_configuration *c,
+static int sourcesink_setup(struct usb_function *f,
const struct usb_ctrlrequest *ctrl)
{
+ struct usb_configuration *c = f->config;
struct usb_request *req = c->cdev->req;
int value = -EOPNOTSUPP;
u16 w_index = le16_to_cpu(ctrl->wIndex);
@@ -851,42 +867,76 @@
return value;
}
-static struct usb_configuration sourcesink_driver = {
- .label = "source/sink",
- .strings = sourcesink_strings,
- .setup = sourcesink_setup,
- .bConfigurationValue = 3,
- .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- /* .iConfiguration = DYNAMIC */
-};
-
-/**
- * sourcesink_add - add a source/sink testing configuration to a device
- * @cdev: the device to support the configuration
- */
-int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume)
+static struct usb_function *source_sink_alloc_func(
+ struct usb_function_instance *fi)
{
- int id;
+ struct f_sourcesink *ss;
+ struct f_ss_opts *ss_opts;
- /* allocate string ID(s) */
- id = usb_string_id(cdev);
- if (id < 0)
- return id;
- strings_sourcesink[0].id = id;
+ ss = kzalloc(sizeof(*ss), GFP_KERNEL);
+ if (!ss)
+ return NULL;
- source_sink_intf_alt0.iInterface = id;
- source_sink_intf_alt1.iInterface = id;
- sourcesink_driver.iConfiguration = id;
+ ss_opts = container_of(fi, struct f_ss_opts, func_inst);
+ pattern = ss_opts->pattern;
+ isoc_interval = ss_opts->isoc_interval;
+ isoc_maxpacket = ss_opts->isoc_maxpacket;
+ isoc_mult = ss_opts->isoc_mult;
+ isoc_maxburst = ss_opts->isoc_maxburst;
+ buflen = ss_opts->bulk_buflen;
- /* support autoresume for remote wakeup testing */
- if (autoresume)
- sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ ss->function.name = "source/sink";
+ ss->function.bind = sourcesink_bind;
+ ss->function.set_alt = sourcesink_set_alt;
+ ss->function.get_alt = sourcesink_get_alt;
+ ss->function.disable = sourcesink_disable;
+ ss->function.setup = sourcesink_setup;
+ ss->function.strings = sourcesink_strings;
- /* support OTG systems */
- if (gadget_is_otg(cdev->gadget)) {
- sourcesink_driver.descriptors = otg_desc;
- sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- }
+ ss->function.free_func = sourcesink_free_func;
- return usb_add_config(cdev, &sourcesink_driver, sourcesink_bind_config);
+ return &ss->function;
}
+
+static void acm_free_instance(struct usb_function_instance *fi)
+{
+ struct f_ss_opts *ss_opts;
+
+ ss_opts = container_of(fi, struct f_ss_opts, func_inst);
+ kfree(ss_opts);
+}
+
+static struct usb_function_instance *source_sink_alloc_inst(void)
+{
+ struct f_ss_opts *ss_opts;
+
+ ss_opts = kzalloc(sizeof(*ss_opts), GFP_KERNEL);
+ if (!ss_opts)
+ return ERR_PTR(-ENOMEM);
+ ss_opts->func_inst.free_func_inst = acm_free_instance;
+ return &ss_opts->func_inst;
+}
+DECLARE_USB_FUNCTION(SourceSink, source_sink_alloc_inst,
+ source_sink_alloc_func);
+
+static int __init sslb_modinit(void)
+{
+ int ret;
+
+ ret = usb_function_register(&SourceSinkusb_func);
+ if (ret)
+ return ret;
+ ret = lb_modinit();
+ if (ret)
+ usb_function_unregister(&SourceSinkusb_func);
+ return ret;
+}
+static void __exit sslb_modexit(void)
+{
+ usb_function_unregister(&SourceSinkusb_func);
+ lb_modexit();
+}
+module_init(sslb_modinit);
+module_exit(sslb_modexit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/f_uac2.c b/drivers/usb/gadget/f_uac2.c
index d7da258..c7468b6 100644
--- a/drivers/usb/gadget/f_uac2.c
+++ b/drivers/usb/gadget/f_uac2.c
@@ -260,19 +260,14 @@
uac2_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct snd_uac2_chip *uac2 = snd_pcm_substream_chip(substream);
- struct audio_dev *agdev = uac2_to_agdev(uac2);
struct uac2_rtd_params *prm;
unsigned long flags;
- struct usb_ep *ep;
int err = 0;
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- ep = agdev->in_ep;
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
prm = &uac2->p_prm;
- } else {
- ep = agdev->out_ep;
+ else
prm = &uac2->c_prm;
- }
spin_lock_irqsave(&prm->lock, flags);
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index ec50f18..034477c 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -1894,7 +1894,7 @@
struct usb_gadget_driver *driver);
/* defined in usb_gadget.h */
-static struct usb_gadget_ops qe_gadget_ops = {
+static const struct usb_gadget_ops qe_gadget_ops = {
.get_frame = qe_get_frame,
.udc_start = fsl_qe_start,
.udc_stop = fsl_qe_stop,
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index c19f7f1..3893956 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1254,19 +1254,20 @@
return 0;
}
-static int fsl_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int fsl_stop(struct usb_gadget_driver *driver);
+static int fsl_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
+static int fsl_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
/* defined in gadget.h */
-static struct usb_gadget_ops fsl_gadget_ops = {
+static const struct usb_gadget_ops fsl_gadget_ops = {
.get_frame = fsl_get_frame,
.wakeup = fsl_wakeup,
/* .set_selfpowered = fsl_set_selfpowered, */ /* Always selfpowered */
.vbus_session = fsl_vbus_session,
.vbus_draw = fsl_vbus_draw,
.pullup = fsl_pullup,
- .start = fsl_start,
- .stop = fsl_stop,
+ .udc_start = fsl_udc_start,
+ .udc_stop = fsl_udc_stop,
};
/* Set protocol stall on ep0, protocol stall will automatically be cleared
@@ -1950,22 +1951,12 @@
* Hook to gadget drivers
* Called by initialization code of gadget drivers
*----------------------------------------------------------------*/
-static int fsl_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int fsl_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- int retval = -ENODEV;
+ int retval = 0;
unsigned long flags = 0;
- if (!udc_controller)
- return -ENODEV;
-
- if (!driver || driver->max_speed < USB_SPEED_FULL
- || !bind || !driver->disconnect || !driver->setup)
- return -EINVAL;
-
- if (udc_controller->driver)
- return -EBUSY;
-
/* lock is needed but whether should use this lock or another */
spin_lock_irqsave(&udc_controller->lock, flags);
@@ -1975,15 +1966,6 @@
udc_controller->gadget.dev.driver = &driver->driver;
spin_unlock_irqrestore(&udc_controller->lock, flags);
- /* bind udc driver to gadget driver */
- retval = bind(&udc_controller->gadget, driver);
- if (retval) {
- VDBG("bind to %s --> %d", driver->driver.name, retval);
- udc_controller->gadget.dev.driver = NULL;
- udc_controller->driver = NULL;
- goto out;
- }
-
if (!IS_ERR_OR_NULL(udc_controller->transceiver)) {
/* Suspend the controller until OTG enable it */
udc_controller->stopped = 1;
@@ -2009,28 +1991,17 @@
udc_controller->ep0_state = WAIT_FOR_SETUP;
udc_controller->ep0_dir = 0;
}
- printk(KERN_INFO "%s: bind to driver %s\n",
- udc_controller->gadget.name, driver->driver.name);
-out:
- if (retval)
- printk(KERN_WARNING "gadget driver register failed %d\n",
- retval);
return retval;
}
/* Disconnect from gadget driver */
-static int fsl_stop(struct usb_gadget_driver *driver)
+static int fsl_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
struct fsl_ep *loop_ep;
unsigned long flags;
- if (!udc_controller)
- return -ENODEV;
-
- if (!driver || driver != udc_controller->driver || !driver->unbind)
- return -EINVAL;
-
if (!IS_ERR_OR_NULL(udc_controller->transceiver))
otg_set_peripheral(udc_controller->transceiver->otg, NULL);
@@ -2051,16 +2022,9 @@
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
- /* report disconnect; the controller is already quiesced */
- driver->disconnect(&udc_controller->gadget);
-
- /* unbind gadget and unhook driver. */
- driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
udc_controller->driver = NULL;
- printk(KERN_WARNING "unregistered gadget driver '%s'\n",
- driver->driver.name);
return 0;
}
diff --git a/drivers/usb/gadget/functions.c b/drivers/usb/gadget/functions.c
new file mode 100644
index 0000000..b13f839
--- /dev/null
+++ b/drivers/usb/gadget/functions.c
@@ -0,0 +1,116 @@
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#include <linux/usb/composite.h>
+
+static LIST_HEAD(func_list);
+static DEFINE_MUTEX(func_lock);
+
+static struct usb_function_instance *try_get_usb_function_instance(const char *name)
+{
+ struct usb_function_driver *fd;
+ struct usb_function_instance *fi;
+
+ fi = ERR_PTR(-ENOENT);
+ mutex_lock(&func_lock);
+ list_for_each_entry(fd, &func_list, list) {
+
+ if (strcmp(name, fd->name))
+ continue;
+
+ if (!try_module_get(fd->mod)) {
+ fi = ERR_PTR(-EBUSY);
+ break;
+ }
+ fi = fd->alloc_inst();
+ if (IS_ERR(fi))
+ module_put(fd->mod);
+ else
+ fi->fd = fd;
+ break;
+ }
+ mutex_unlock(&func_lock);
+ return fi;
+}
+
+struct usb_function_instance *usb_get_function_instance(const char *name)
+{
+ struct usb_function_instance *fi;
+ int ret;
+
+ fi = try_get_usb_function_instance(name);
+ if (!IS_ERR(fi))
+ return fi;
+ ret = PTR_ERR(fi);
+ if (ret != -ENOENT)
+ return fi;
+ ret = request_module("usbfunc:%s", name);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ return try_get_usb_function_instance(name);
+}
+EXPORT_SYMBOL_GPL(usb_get_function_instance);
+
+struct usb_function *usb_get_function(struct usb_function_instance *fi)
+{
+ struct usb_function *f;
+
+ f = fi->fd->alloc_func(fi);
+ if (IS_ERR(f))
+ return f;
+ f->fi = fi;
+ return f;
+}
+EXPORT_SYMBOL_GPL(usb_get_function);
+
+void usb_put_function_instance(struct usb_function_instance *fi)
+{
+ struct module *mod;
+
+ if (!fi)
+ return;
+
+ mod = fi->fd->mod;
+ fi->free_func_inst(fi);
+ module_put(mod);
+}
+EXPORT_SYMBOL_GPL(usb_put_function_instance);
+
+void usb_put_function(struct usb_function *f)
+{
+ if (!f)
+ return;
+
+ f->free_func(f);
+}
+EXPORT_SYMBOL_GPL(usb_put_function);
+
+int usb_function_register(struct usb_function_driver *newf)
+{
+ struct usb_function_driver *fd;
+ int ret;
+
+ ret = -EEXIST;
+
+ mutex_lock(&func_lock);
+ list_for_each_entry(fd, &func_list, list) {
+ if (!strcmp(fd->name, newf->name))
+ goto out;
+ }
+ ret = 0;
+ list_add_tail(&newf->list, &func_list);
+out:
+ mutex_unlock(&func_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_function_register);
+
+void usb_function_unregister(struct usb_function_driver *fd)
+{
+ mutex_lock(&func_lock);
+ list_del(&fd->list);
+ mutex_unlock(&func_lock);
+}
+EXPORT_SYMBOL_GPL(usb_function_unregister);
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 72cd5e6..9fafb00 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -1308,65 +1308,28 @@
iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1);
}
/*------------------------------------------------------------------------*/
-static struct fusb300 *the_controller;
-
-static int fusb300_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int fusb300_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct fusb300 *fusb300 = the_controller;
- int retval;
-
- if (!driver
- || driver->max_speed < USB_SPEED_FULL
- || !bind
- || !driver->setup)
- return -EINVAL;
-
- if (!fusb300)
- return -ENODEV;
-
- if (fusb300->driver)
- return -EBUSY;
+ struct fusb300 *fusb300 = to_fusb300(g);
/* hook up the driver */
driver->driver.bus = NULL;
fusb300->driver = driver;
fusb300->gadget.dev.driver = &driver->driver;
- retval = device_add(&fusb300->gadget.dev);
- if (retval) {
- pr_err("device_add error (%d)\n", retval);
- goto error;
- }
-
- retval = bind(&fusb300->gadget, driver);
- if (retval) {
- pr_err("bind to driver error (%d)\n", retval);
- device_del(&fusb300->gadget.dev);
- goto error;
- }
-
return 0;
-
-error:
- fusb300->driver = NULL;
- fusb300->gadget.dev.driver = NULL;
-
- return retval;
}
-static int fusb300_udc_stop(struct usb_gadget_driver *driver)
+static int fusb300_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct fusb300 *fusb300 = the_controller;
-
- if (driver != fusb300->driver || !driver->unbind)
- return -EINVAL;
+ struct fusb300 *fusb300 = to_fusb300(g);
driver->unbind(&fusb300->gadget);
fusb300->gadget.dev.driver = NULL;
init_controller(fusb300);
- device_del(&fusb300->gadget.dev);
fusb300->driver = NULL;
return 0;
@@ -1378,10 +1341,10 @@
return 0;
}
-static struct usb_gadget_ops fusb300_gadget_ops = {
+static const struct usb_gadget_ops fusb300_gadget_ops = {
.pullup = fusb300_udc_pullup,
- .start = fusb300_udc_start,
- .stop = fusb300_udc_stop,
+ .udc_start = fusb300_udc_start,
+ .udc_stop = fusb300_udc_stop,
};
static int __exit fusb300_remove(struct platform_device *pdev)
@@ -1505,8 +1468,6 @@
fusb300->gadget.ep0 = &fusb300->ep[0]->ep;
INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list);
- the_controller = fusb300;
-
fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep,
GFP_KERNEL);
if (fusb300->ep0_req == NULL)
@@ -1517,9 +1478,19 @@
if (ret)
goto err_add_udc;
+ ret = device_add(&fusb300->gadget.dev);
+ if (ret) {
+ pr_err("device_add error (%d)\n", ret);
+ goto err_add_device;
+ }
+
dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
return 0;
+
+err_add_device:
+ usb_del_gadget_udc(&fusb300->gadget);
+
err_add_udc:
fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h
index 542cd83..6ba444a 100644
--- a/drivers/usb/gadget/fusb300_udc.h
+++ b/drivers/usb/gadget/fusb300_udc.h
@@ -673,4 +673,6 @@
u8 reenum; /* if re-enumeration */
};
+#define to_fusb300(g) (container_of((g), struct fusb300, gadget))
+
#endif
diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h
index 71ca193..ef3e851 100644
--- a/drivers/usb/gadget/g_zero.h
+++ b/drivers/usb/gadget/g_zero.h
@@ -6,11 +6,34 @@
#ifndef __G_ZERO_H
#define __G_ZERO_H
-#include <linux/usb/composite.h>
+struct usb_zero_options {
+ unsigned pattern;
+ unsigned isoc_interval;
+ unsigned isoc_maxpacket;
+ unsigned isoc_mult;
+ unsigned isoc_maxburst;
+ unsigned bulk_buflen;
+ unsigned qlen;
+};
-/* global state */
-extern unsigned buflen;
-extern const struct usb_descriptor_header *otg_desc[];
+struct f_ss_opts {
+ struct usb_function_instance func_inst;
+ unsigned pattern;
+ unsigned isoc_interval;
+ unsigned isoc_maxpacket;
+ unsigned isoc_mult;
+ unsigned isoc_maxburst;
+ unsigned bulk_buflen;
+};
+
+struct f_lb_opts {
+ struct usb_function_instance func_inst;
+ unsigned bulk_buflen;
+ unsigned qlen;
+};
+
+void lb_modexit(void);
+int lb_modinit(void);
/* common utilities */
struct usb_request *alloc_ep_req(struct usb_ep *ep, int len);
@@ -19,8 +42,4 @@
struct usb_ep *in, struct usb_ep *out,
struct usb_ep *iso_in, struct usb_ep *iso_out);
-/* configuration-specific linkup */
-int sourcesink_add(struct usb_composite_dev *cdev, bool autoresume);
-int loopback_add(struct usb_composite_dev *cdev, bool autoresume);
-
#endif /* __G_ZERO_H */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 881aab8..e879e2c 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -125,7 +125,7 @@
.bConfigurationValue = 1,
/* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_ONE,
- .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
+ .MaxPower = CONFIG_USB_GADGET_VBUS_DRAW,
};
static int __init midi_bind_config(struct usb_configuration *c)
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 51037cb..85742d4 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -993,14 +993,15 @@
return -EOPNOTSUPP;
}
-static int goku_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int goku_stop(struct usb_gadget_driver *driver);
+static int goku_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
+static int goku_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
static const struct usb_gadget_ops goku_ops = {
.get_frame = goku_get_frame,
- .start = goku_start,
- .stop = goku_stop,
+ .udc_start = goku_udc_start,
+ .udc_stop = goku_udc_stop,
// no remote wakeup
// not selfpowered
};
@@ -1339,50 +1340,28 @@
* - one function driver, initted second
*/
-static struct goku_udc *the_controller;
-
/* when a driver is successfully registered, it will receive
* control requests including set_configuration(), which enables
* non-control requests. then usb traffic follows until a
* disconnect is reported. then a host may connect again, or
* the driver might get unbound.
*/
-static int goku_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int goku_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct goku_udc *dev = the_controller;
- int retval;
-
- if (!driver
- || driver->max_speed < USB_SPEED_FULL
- || !bind
- || !driver->disconnect
- || !driver->setup)
- return -EINVAL;
- if (!dev)
- return -ENODEV;
- if (dev->driver)
- return -EBUSY;
+ struct goku_udc *dev = to_goku_udc(g);
/* hook up the driver */
driver->driver.bus = NULL;
dev->driver = driver;
dev->gadget.dev.driver = &driver->driver;
- retval = bind(&dev->gadget, driver);
- if (retval) {
- DBG(dev, "bind to driver %s --> error %d\n",
- driver->driver.name, retval);
- dev->driver = NULL;
- dev->gadget.dev.driver = NULL;
- return retval;
- }
- /* then enable host detection and ep0; and we're ready
+ /*
+ * then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
*/
udc_enable(dev);
- DBG(dev, "registered gadget driver '%s'\n", driver->driver.name);
return 0;
}
@@ -1400,35 +1379,23 @@
udc_reset (dev);
for (i = 0; i < 4; i++)
nuke(&dev->ep [i], -ESHUTDOWN);
- if (driver) {
- spin_unlock(&dev->lock);
- driver->disconnect(&dev->gadget);
- spin_lock(&dev->lock);
- }
if (dev->driver)
udc_enable(dev);
}
-static int goku_stop(struct usb_gadget_driver *driver)
+static int goku_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct goku_udc *dev = the_controller;
+ struct goku_udc *dev = to_goku_udc(g);
unsigned long flags;
- if (!dev)
- return -ENODEV;
- if (!driver || driver != dev->driver || !driver->unbind)
- return -EINVAL;
-
spin_lock_irqsave(&dev->lock, flags);
dev->driver = NULL;
stop_activity(dev, driver);
spin_unlock_irqrestore(&dev->lock, flags);
-
- driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
- DBG(dev, "unregistered driver '%s'\n", driver->driver.name);
return 0;
}
@@ -1754,7 +1721,6 @@
pci_set_drvdata(pdev, NULL);
dev->regs = NULL;
- the_controller = NULL;
INFO(dev, "unbind\n");
}
@@ -1770,13 +1736,6 @@
void __iomem *base = NULL;
int retval;
- /* if you want to support more than one controller in a system,
- * usb_gadget_driver_{register,unregister}() must change.
- */
- if (the_controller) {
- pr_warning("ignoring %s\n", pci_name(pdev));
- return -EBUSY;
- }
if (!pdev->irq) {
printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev));
retval = -ENODEV;
@@ -1851,7 +1810,6 @@
create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev);
#endif
- the_controller = dev;
retval = device_register(&dev->gadget.dev);
if (retval) {
put_device(&dev->gadget.dev);
diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
index 85cdce0..b4470d2 100644
--- a/drivers/usb/gadget/goku_udc.h
+++ b/drivers/usb/gadget/goku_udc.h
@@ -261,6 +261,7 @@
/* statistics... */
unsigned long irqs;
};
+#define to_goku_udc(g) (container_of((g), struct goku_udc, gadget))
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index b6401f1..34a0cb9 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1463,42 +1463,16 @@
};
/*-------------------------------------------------------------------------*/
-static struct m66592 *the_controller;
-
-static int m66592_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int m66592_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct m66592 *m66592 = the_controller;
- int retval;
-
- if (!driver
- || driver->max_speed < USB_SPEED_HIGH
- || !bind
- || !driver->setup)
- return -EINVAL;
- if (!m66592)
- return -ENODEV;
- if (m66592->driver)
- return -EBUSY;
+ struct m66592 *m66592 = to_m66592(g);
/* hook up the driver */
driver->driver.bus = NULL;
m66592->driver = driver;
m66592->gadget.dev.driver = &driver->driver;
- retval = device_add(&m66592->gadget.dev);
- if (retval) {
- pr_err("device_add error (%d)\n", retval);
- goto error;
- }
-
- retval = bind(&m66592->gadget, driver);
- if (retval) {
- pr_err("bind to driver error (%d)\n", retval);
- device_del(&m66592->gadget.dev);
- goto error;
- }
-
m66592_bset(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0);
if (m66592_read(m66592, M66592_INTSTS0) & M66592_VBSTS) {
m66592_start_xclock(m66592);
@@ -1510,26 +1484,12 @@
}
return 0;
-
-error:
- m66592->driver = NULL;
- m66592->gadget.dev.driver = NULL;
-
- return retval;
}
-static int m66592_stop(struct usb_gadget_driver *driver)
+static int m66592_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct m66592 *m66592 = the_controller;
- unsigned long flags;
-
- if (driver != m66592->driver || !driver->unbind)
- return -EINVAL;
-
- spin_lock_irqsave(&m66592->lock, flags);
- if (m66592->gadget.speed != USB_SPEED_UNKNOWN)
- m66592_usb_disconnect(m66592);
- spin_unlock_irqrestore(&m66592->lock, flags);
+ struct m66592 *m66592 = to_m66592(g);
m66592_bclr(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0);
@@ -1539,8 +1499,8 @@
init_controller(m66592);
disable_controller(m66592);
- device_del(&m66592->gadget.dev);
m66592->driver = NULL;
+
return 0;
}
@@ -1566,10 +1526,10 @@
return 0;
}
-static struct usb_gadget_ops m66592_gadget_ops = {
+static const struct usb_gadget_ops m66592_gadget_ops = {
.get_frame = m66592_get_frame,
- .start = m66592_start,
- .stop = m66592_stop,
+ .udc_start = m66592_udc_start,
+ .udc_stop = m66592_udc_stop,
.pullup = m66592_pullup,
};
@@ -1578,6 +1538,7 @@
struct m66592 *m66592 = dev_get_drvdata(&pdev->dev);
usb_del_gadget_udc(&m66592->gadget);
+ device_del(&m66592->gadget.dev);
del_timer_sync(&m66592->timer);
iounmap(m66592->reg);
@@ -1706,8 +1667,6 @@
m66592->pipenum2ep[0] = &m66592->ep[0];
m66592->epaddr2ep[0] = &m66592->ep[0];
- the_controller = m66592;
-
m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL);
if (m66592->ep0_req == NULL)
goto clean_up3;
@@ -1715,6 +1674,12 @@
init_controller(m66592);
+ ret = device_add(&m66592->gadget.dev);
+ if (ret) {
+ pr_err("device_add error (%d)\n", ret);
+ goto err_device_add;
+ }
+
ret = usb_add_gadget_udc(&pdev->dev, &m66592->gadget);
if (ret)
goto err_add_udc;
@@ -1723,6 +1688,9 @@
return 0;
err_add_udc:
+ device_del(&m66592->gadget.dev);
+
+err_device_add:
m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
clean_up3:
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 16c7e14..96d49d7 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -492,6 +492,7 @@
int isochronous;
int num_dma;
};
+#define to_m66592(g) (container_of((g), struct m66592, gadget))
#define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget)
#define m66592_to_gadget(m66592) (&m66592->gadget)
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 88472bf..20bbbf9 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include "u_serial.h"
#if defined USB_ETH_RNDIS
# undef USB_ETH_RNDIS
#endif
@@ -42,9 +43,6 @@
*/
#include "f_mass_storage.c"
-#include "u_serial.c"
-#include "f_acm.c"
-
#include "f_ecm.c"
#include "f_subset.c"
#ifdef USB_ETH_RNDIS
@@ -137,10 +135,13 @@
static u8 hostaddr[ETH_ALEN];
+static unsigned char tty_line;
+static struct usb_function_instance *fi_acm;
/********** RNDIS **********/
#ifdef USB_ETH_RNDIS
+static struct usb_function *f_acm_rndis;
static __init int rndis_do_config(struct usb_configuration *c)
{
@@ -155,15 +156,25 @@
if (ret < 0)
return ret;
- ret = acm_bind_config(c, 0);
- if (ret < 0)
- return ret;
+ f_acm_rndis = usb_get_function(fi_acm);
+ if (IS_ERR(f_acm_rndis))
+ goto err_func_acm;
+
+ ret = usb_add_function(c, f_acm_rndis);
+ if (ret)
+ goto err_conf;
ret = fsg_bind_config(c->cdev, c, &fsg_common);
if (ret < 0)
- return ret;
+ goto err_fsg;
return 0;
+err_fsg:
+ usb_remove_function(c, f_acm_rndis);
+err_conf:
+ usb_put_function(f_acm_rndis);
+err_func_acm:
+ return ret;
}
static int rndis_config_register(struct usb_composite_dev *cdev)
@@ -192,6 +203,7 @@
/********** CDC ECM **********/
#ifdef CONFIG_USB_G_MULTI_CDC
+static struct usb_function *f_acm_multi;
static __init int cdc_do_config(struct usb_configuration *c)
{
@@ -206,15 +218,26 @@
if (ret < 0)
return ret;
- ret = acm_bind_config(c, 0);
- if (ret < 0)
- return ret;
+ /* implicit port_num is zero */
+ f_acm_multi = usb_get_function(fi_acm);
+ if (IS_ERR(f_acm_multi))
+ goto err_func_acm;
+
+ ret = usb_add_function(c, f_acm_multi);
+ if (ret)
+ goto err_conf;
ret = fsg_bind_config(c->cdev, c, &fsg_common);
if (ret < 0)
- return ret;
+ goto err_fsg;
return 0;
+err_fsg:
+ usb_remove_function(c, f_acm_multi);
+err_conf:
+ usb_put_function(f_acm_multi);
+err_func_acm:
+ return ret;
}
static int cdc_config_register(struct usb_composite_dev *cdev)
@@ -243,10 +266,10 @@
/****************************** Gadget Bind ******************************/
-
static int __ref multi_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
+ struct f_serial_opts *opts;
int status;
if (!can_support_ecm(cdev->gadget)) {
@@ -261,10 +284,19 @@
return status;
/* set up serial link layer */
- status = gserial_setup(cdev->gadget, 1);
+ status = gserial_alloc_line(&tty_line);
if (status < 0)
goto fail0;
+ fi_acm = usb_get_function_instance("acm");
+ if (IS_ERR(fi_acm)) {
+ status = PTR_ERR(fi_acm);
+ goto fail0dot5;
+ }
+
+ opts = container_of(fi_acm, struct f_serial_opts, func_inst);
+ opts->port_num = tty_line;
+
/* set up mass storage function */
{
void *retp;
@@ -301,7 +333,9 @@
fail2:
fsg_common_put(&fsg_common);
fail1:
- gserial_cleanup();
+ usb_put_function_instance(fi_acm);
+fail0dot5:
+ gserial_free_line(tty_line);
fail0:
gether_cleanup();
return status;
@@ -309,7 +343,14 @@
static int __exit multi_unbind(struct usb_composite_dev *cdev)
{
- gserial_cleanup();
+#ifdef CONFIG_USB_G_MULTI_CDC
+ usb_put_function(f_acm_multi);
+#endif
+#ifdef USB_ETH_RNDIS
+ usb_put_function(f_acm_rndis);
+#endif
+ usb_put_function_instance(fi_acm);
+ gserial_free_line(tty_line);
gether_cleanup();
return 0;
}
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 6e8b127..c8cf959 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -61,9 +61,6 @@
static const char driver_name[] = "mv_udc";
static const char driver_desc[] = DRIVER_DESC;
-/* controller device global variable */
-static struct mv_udc *the_controller;
-
static void nuke(struct mv_ep *ep, int status);
static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver);
@@ -1268,9 +1265,8 @@
return retval;
}
-static int mv_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int mv_udc_stop(struct usb_gadget_driver *driver);
+static int mv_udc_start(struct usb_gadget *, struct usb_gadget_driver *);
+static int mv_udc_stop(struct usb_gadget *, struct usb_gadget_driver *);
/* device controller usb_gadget_ops structure */
static const struct usb_gadget_ops mv_ops = {
@@ -1285,8 +1281,8 @@
/* D+ pullup, software-controlled connect/disconnect to USB host */
.pullup = mv_udc_pullup,
- .start = mv_udc_start,
- .stop = mv_udc_stop,
+ .udc_start = mv_udc_start,
+ .udc_stop = mv_udc_stop,
};
static int eps_init(struct mv_udc *udc)
@@ -1373,15 +1369,14 @@
}
}
-static int mv_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int mv_udc_start(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
int retval = 0;
unsigned long flags;
- if (!udc)
- return -ENODEV;
+ udc = container_of(gadget, struct mv_udc, gadget);
if (udc->driver)
return -EBUSY;
@@ -1399,26 +1394,14 @@
spin_unlock_irqrestore(&udc->lock, flags);
- retval = bind(&udc->gadget, driver);
- if (retval) {
- dev_err(&udc->dev->dev, "bind to driver %s --> %d\n",
- driver->driver.name, retval);
- udc->driver = NULL;
- udc->gadget.dev.driver = NULL;
- return retval;
- }
-
- if (!IS_ERR_OR_NULL(udc->transceiver)) {
+ if (udc->transceiver) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
if (retval) {
dev_err(&udc->dev->dev,
"unable to register peripheral to otg\n");
- if (driver->unbind) {
- driver->unbind(&udc->gadget);
- udc->gadget.dev.driver = NULL;
- udc->driver = NULL;
- }
+ udc->driver = NULL;
+ udc->gadget.dev.driver = NULL;
return retval;
}
}
@@ -1433,13 +1416,13 @@
return 0;
}
-static int mv_udc_stop(struct usb_gadget_driver *driver)
+static int mv_udc_stop(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
unsigned long flags;
- if (!udc)
- return -ENODEV;
+ udc = container_of(gadget, struct mv_udc, gadget);
spin_lock_irqsave(&udc->lock, flags);
@@ -1454,7 +1437,6 @@
spin_unlock_irqrestore(&udc->lock, flags);
/* unbind gadget driver */
- driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
udc->driver = NULL;
@@ -1472,10 +1454,13 @@
static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req)
{
- struct mv_udc *udc = the_controller;
+ struct mv_ep *mvep = container_of(ep, struct mv_ep, ep);
struct mv_req *req = container_of(_req, struct mv_req, req);
+ struct mv_udc *udc;
unsigned long flags;
+ udc = mvep->udc;
+
dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode);
spin_lock_irqsave(&udc->lock, flags);
@@ -2123,15 +2108,18 @@
/* release device structure */
static void gadget_release(struct device *_dev)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
+
+ udc = dev_get_drvdata(_dev);
complete(udc->done);
}
-static int mv_udc_remove(struct platform_device *dev)
+static int mv_udc_remove(struct platform_device *pdev)
{
- struct mv_udc *udc = the_controller;
- int clk_i;
+ struct mv_udc *udc;
+
+ udc = platform_get_drvdata(pdev);
usb_del_gadget_udc(&udc->gadget);
@@ -2140,57 +2128,27 @@
destroy_workqueue(udc->qwork);
}
- /*
- * If we have transceiver inited,
- * then vbus irq will not be requested in udc driver.
- */
- if (udc->pdata && udc->pdata->vbus
- && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
- free_irq(udc->pdata->vbus->irq, &dev->dev);
-
/* free memory allocated in probe */
if (udc->dtd_pool)
dma_pool_destroy(udc->dtd_pool);
if (udc->ep_dqh)
- dma_free_coherent(&dev->dev, udc->ep_dqh_size,
+ dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
udc->ep_dqh, udc->ep_dqh_dma);
- kfree(udc->eps);
-
- if (udc->irq)
- free_irq(udc->irq, &dev->dev);
-
mv_udc_disable(udc);
- if (udc->cap_regs)
- iounmap(udc->cap_regs);
-
- if (udc->phy_regs)
- iounmap(udc->phy_regs);
-
- if (udc->status_req) {
- kfree(udc->status_req->req.buf);
- kfree(udc->status_req);
- }
-
- for (clk_i = 0; clk_i <= udc->clknum; clk_i++)
- clk_put(udc->clk[clk_i]);
-
device_unregister(&udc->gadget.dev);
/* free dev, wait for the release() finished */
wait_for_completion(udc->done);
- kfree(udc);
-
- the_controller = NULL;
return 0;
}
-static int mv_udc_probe(struct platform_device *dev)
+static int mv_udc_probe(struct platform_device *pdev)
{
- struct mv_usb_platform_data *pdata = dev->dev.platform_data;
+ struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
struct mv_udc *udc;
int retval = 0;
int clk_i = 0;
@@ -2198,71 +2156,73 @@
size_t size;
if (pdata == NULL) {
- dev_err(&dev->dev, "missing platform_data\n");
+ dev_err(&pdev->dev, "missing platform_data\n");
return -ENODEV;
}
size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum;
- udc = kzalloc(size, GFP_KERNEL);
+ udc = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (udc == NULL) {
- dev_err(&dev->dev, "failed to allocate memory for udc\n");
+ dev_err(&pdev->dev, "failed to allocate memory for udc\n");
return -ENOMEM;
}
- the_controller = udc;
udc->done = &release_done;
- udc->pdata = dev->dev.platform_data;
+ udc->pdata = pdev->dev.platform_data;
spin_lock_init(&udc->lock);
- udc->dev = dev;
+ udc->dev = pdev;
#ifdef CONFIG_USB_OTG_UTILS
- if (pdata->mode == MV_USB_MODE_OTG)
- udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (pdata->mode == MV_USB_MODE_OTG) {
+ udc->transceiver = devm_usb_get_phy(&pdev->dev,
+ USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(udc->transceiver)) {
+ udc->transceiver = NULL;
+ return -ENODEV;
+ }
+ }
#endif
udc->clknum = pdata->clknum;
for (clk_i = 0; clk_i < udc->clknum; clk_i++) {
- udc->clk[clk_i] = clk_get(&dev->dev, pdata->clkname[clk_i]);
+ udc->clk[clk_i] = devm_clk_get(&pdev->dev,
+ pdata->clkname[clk_i]);
if (IS_ERR(udc->clk[clk_i])) {
retval = PTR_ERR(udc->clk[clk_i]);
- goto err_put_clk;
+ return retval;
}
}
r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs");
if (r == NULL) {
- dev_err(&dev->dev, "no I/O memory resource defined\n");
- retval = -ENODEV;
- goto err_put_clk;
+ dev_err(&pdev->dev, "no I/O memory resource defined\n");
+ return -ENODEV;
}
udc->cap_regs = (struct mv_cap_regs __iomem *)
- ioremap(r->start, resource_size(r));
+ devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (udc->cap_regs == NULL) {
- dev_err(&dev->dev, "failed to map I/O memory\n");
- retval = -EBUSY;
- goto err_put_clk;
+ dev_err(&pdev->dev, "failed to map I/O memory\n");
+ return -EBUSY;
}
r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs");
if (r == NULL) {
- dev_err(&dev->dev, "no phy I/O memory resource defined\n");
- retval = -ENODEV;
- goto err_iounmap_capreg;
+ dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+ return -ENODEV;
}
udc->phy_regs = ioremap(r->start, resource_size(r));
if (udc->phy_regs == NULL) {
- dev_err(&dev->dev, "failed to map phy I/O memory\n");
- retval = -EBUSY;
- goto err_iounmap_capreg;
+ dev_err(&pdev->dev, "failed to map phy I/O memory\n");
+ return -EBUSY;
}
/* we will acces controller register, so enable the clk */
retval = mv_udc_enable_internal(udc);
if (retval)
- goto err_iounmap_phyreg;
+ return retval;
udc->op_regs =
(struct mv_op_regs __iomem *)((unsigned long)udc->cap_regs
@@ -2279,11 +2239,11 @@
size = udc->max_eps * sizeof(struct mv_dqh) *2;
size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1);
- udc->ep_dqh = dma_alloc_coherent(&dev->dev, size,
+ udc->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
&udc->ep_dqh_dma, GFP_KERNEL);
if (udc->ep_dqh == NULL) {
- dev_err(&dev->dev, "allocate dQH memory failed\n");
+ dev_err(&pdev->dev, "allocate dQH memory failed\n");
retval = -ENOMEM;
goto err_disable_clock;
}
@@ -2291,7 +2251,7 @@
/* create dTD dma_pool resource */
udc->dtd_pool = dma_pool_create("mv_dtd",
- &dev->dev,
+ &pdev->dev,
sizeof(struct mv_dtd),
DTD_ALIGNMENT,
DMA_BOUNDARY);
@@ -2302,19 +2262,20 @@
}
size = udc->max_eps * sizeof(struct mv_ep) *2;
- udc->eps = kzalloc(size, GFP_KERNEL);
+ udc->eps = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (udc->eps == NULL) {
- dev_err(&dev->dev, "allocate ep memory failed\n");
+ dev_err(&pdev->dev, "allocate ep memory failed\n");
retval = -ENOMEM;
goto err_destroy_dma;
}
/* initialize ep0 status request structure */
- udc->status_req = kzalloc(sizeof(struct mv_req), GFP_KERNEL);
+ udc->status_req = devm_kzalloc(&pdev->dev, sizeof(struct mv_req),
+ GFP_KERNEL);
if (!udc->status_req) {
- dev_err(&dev->dev, "allocate status_req memory failed\n");
+ dev_err(&pdev->dev, "allocate status_req memory failed\n");
retval = -ENOMEM;
- goto err_free_eps;
+ goto err_destroy_dma;
}
INIT_LIST_HEAD(&udc->status_req->queue);
@@ -2329,17 +2290,17 @@
r = platform_get_resource(udc->dev, IORESOURCE_IRQ, 0);
if (r == NULL) {
- dev_err(&dev->dev, "no IRQ resource defined\n");
+ dev_err(&pdev->dev, "no IRQ resource defined\n");
retval = -ENODEV;
- goto err_free_status_req;
+ goto err_destroy_dma;
}
udc->irq = r->start;
- if (request_irq(udc->irq, mv_udc_irq,
+ if (devm_request_irq(&pdev->dev, udc->irq, mv_udc_irq,
IRQF_SHARED, driver_name, udc)) {
- dev_err(&dev->dev, "Request irq %d for UDC failed\n",
+ dev_err(&pdev->dev, "Request irq %d for UDC failed\n",
udc->irq);
retval = -ENODEV;
- goto err_free_status_req;
+ goto err_destroy_dma;
}
/* initialize gadget structure */
@@ -2351,26 +2312,27 @@
/* the "gadget" abstracts/virtualizes the controller */
dev_set_name(&udc->gadget.dev, "gadget");
- udc->gadget.dev.parent = &dev->dev;
- udc->gadget.dev.dma_mask = dev->dev.dma_mask;
+ udc->gadget.dev.parent = &pdev->dev;
+ udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
udc->gadget.dev.release = gadget_release;
udc->gadget.name = driver_name; /* gadget name */
retval = device_register(&udc->gadget.dev);
if (retval)
- goto err_free_irq;
+ goto err_destroy_dma;
eps_init(udc);
/* VBUS detect: we can disable/enable clock on demand.*/
- if (!IS_ERR_OR_NULL(udc->transceiver))
+ if (udc->transceiver)
udc->clock_gating = 1;
else if (pdata->vbus) {
udc->clock_gating = 1;
- retval = request_threaded_irq(pdata->vbus->irq, NULL,
+ retval = devm_request_threaded_irq(&pdev->dev,
+ pdata->vbus->irq, NULL,
mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc);
if (retval) {
- dev_info(&dev->dev,
+ dev_info(&pdev->dev,
"Can not request irq for VBUS, "
"disable clock gating\n");
udc->clock_gating = 0;
@@ -2378,7 +2340,7 @@
udc->qwork = create_singlethread_workqueue("mv_udc_queue");
if (!udc->qwork) {
- dev_err(&dev->dev, "cannot create workqueue\n");
+ dev_err(&pdev->dev, "cannot create workqueue\n");
retval = -ENOMEM;
goto err_unregister;
}
@@ -2396,53 +2358,40 @@
else
udc->vbus_active = 1;
- retval = usb_add_gadget_udc(&dev->dev, &udc->gadget);
+ retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
- goto err_unregister;
+ goto err_create_workqueue;
- dev_info(&dev->dev, "successful probe UDC device %s clock gating.\n",
+ platform_set_drvdata(pdev, udc);
+ dev_info(&pdev->dev, "successful probe UDC device %s clock gating.\n",
udc->clock_gating ? "with" : "without");
return 0;
+err_create_workqueue:
+ destroy_workqueue(udc->qwork);
err_unregister:
- if (udc->pdata && udc->pdata->vbus
- && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver))
- free_irq(pdata->vbus->irq, &dev->dev);
device_unregister(&udc->gadget.dev);
-err_free_irq:
- free_irq(udc->irq, &dev->dev);
-err_free_status_req:
- kfree(udc->status_req->req.buf);
- kfree(udc->status_req);
-err_free_eps:
- kfree(udc->eps);
err_destroy_dma:
dma_pool_destroy(udc->dtd_pool);
err_free_dma:
- dma_free_coherent(&dev->dev, udc->ep_dqh_size,
+ dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
udc->ep_dqh, udc->ep_dqh_dma);
err_disable_clock:
mv_udc_disable_internal(udc);
-err_iounmap_phyreg:
- iounmap(udc->phy_regs);
-err_iounmap_capreg:
- iounmap(udc->cap_regs);
-err_put_clk:
- for (clk_i--; clk_i >= 0; clk_i--)
- clk_put(udc->clk[clk_i]);
- the_controller = NULL;
- kfree(udc);
+
return retval;
}
#ifdef CONFIG_PM
-static int mv_udc_suspend(struct device *_dev)
+static int mv_udc_suspend(struct device *dev)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
+
+ udc = dev_get_drvdata(dev);
/* if OTG is enabled, the following will be done in OTG driver*/
- if (!IS_ERR_OR_NULL(udc->transceiver))
+ if (udc->transceiver)
return 0;
if (udc->pdata->vbus && udc->pdata->vbus->poll)
@@ -2469,13 +2418,15 @@
return 0;
}
-static int mv_udc_resume(struct device *_dev)
+static int mv_udc_resume(struct device *dev)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
int retval;
+ udc = dev_get_drvdata(dev);
+
/* if OTG is enabled, the following will be done in OTG driver*/
- if (!IS_ERR_OR_NULL(udc->transceiver))
+ if (udc->transceiver)
return 0;
if (!udc->clock_gating) {
@@ -2499,11 +2450,12 @@
};
#endif
-static void mv_udc_shutdown(struct platform_device *dev)
+static void mv_udc_shutdown(struct platform_device *pdev)
{
- struct mv_udc *udc = the_controller;
+ struct mv_udc *udc;
u32 mode;
+ udc = platform_get_drvdata(pdev);
/* reset controller mode to IDLE */
mv_udc_enable(udc);
mode = readl(&udc->op_regs->usbmode);
@@ -2514,7 +2466,7 @@
static struct platform_driver udc_driver = {
.probe = mv_udc_probe,
- .remove = __exit_p(mv_udc_remove),
+ .remove = mv_udc_remove,
.shutdown = mv_udc_shutdown,
.driver = {
.owner = THIS_MODULE,
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index 661600a..def3740 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -37,7 +37,7 @@
* the runtime footprint, and giving us at least some parts of what
* a "gcc --combine ... part1.c part2.c part3.c ... " build would.
*/
-#include "u_serial.c"
+#define USB_FACM_INCLUDED
#include "f_acm.c"
#include "f_ecm.c"
#include "f_obex.c"
@@ -101,6 +101,15 @@
static u8 hostaddr[ETH_ALEN];
+enum {
+ TTY_PORT_OBEX0,
+ TTY_PORT_OBEX1,
+ TTY_PORT_ACM,
+ TTY_PORTS_MAX,
+};
+
+static unsigned char tty_lines[TTY_PORTS_MAX];
+
static int __init nokia_bind_config(struct usb_configuration *c)
{
int status = 0;
@@ -109,15 +118,15 @@
if (status)
printk(KERN_DEBUG "could not bind phonet config\n");
- status = obex_bind_config(c, 0);
+ status = obex_bind_config(c, tty_lines[TTY_PORT_OBEX0]);
if (status)
printk(KERN_DEBUG "could not bind obex config %d\n", 0);
- status = obex_bind_config(c, 1);
+ status = obex_bind_config(c, tty_lines[TTY_PORT_OBEX1]);
if (status)
printk(KERN_DEBUG "could not bind obex config %d\n", 0);
- status = acm_bind_config(c, 2);
+ status = acm_bind_config(c, tty_lines[TTY_PORT_ACM]);
if (status)
printk(KERN_DEBUG "could not bind acm config\n");
@@ -133,7 +142,7 @@
.bConfigurationValue = 1,
/* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_ONE,
- .bMaxPower = 250, /* 500mA */
+ .MaxPower = 500,
};
static struct usb_configuration nokia_config_100ma_driver = {
@@ -141,21 +150,24 @@
.bConfigurationValue = 2,
/* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 50, /* 100 mA */
+ .MaxPower = 100,
};
static int __init nokia_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
int status;
+ int cur_line;
status = gphonet_setup(cdev->gadget);
if (status < 0)
goto err_phonet;
- status = gserial_setup(cdev->gadget, 3);
- if (status < 0)
- goto err_serial;
+ for (cur_line = 0; cur_line < TTY_PORTS_MAX; cur_line++) {
+ status = gserial_alloc_line(&tty_lines[cur_line]);
+ if (status)
+ goto err_ether;
+ }
status = gether_setup(cdev->gadget, hostaddr);
if (status < 0)
@@ -192,8 +204,10 @@
err_usb:
gether_cleanup();
err_ether:
- gserial_cleanup();
-err_serial:
+ cur_line--;
+ while (cur_line >= 0)
+ gserial_free_line(tty_lines[cur_line--]);
+
gphonet_cleanup();
err_phonet:
return status;
@@ -201,8 +215,13 @@
static int __exit nokia_unbind(struct usb_composite_dev *cdev)
{
+ int i;
+
gphonet_cleanup();
- gserial_cleanup();
+
+ for (i = 0; i < TTY_PORTS_MAX; i++)
+ gserial_free_line(tty_lines[i]);
+
gether_cleanup();
return 0;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 8bfe990..06be85c 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1309,19 +1309,20 @@
return 0;
}
-static int omap_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int omap_udc_stop(struct usb_gadget_driver *driver);
+static int omap_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
+static int omap_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
-static struct usb_gadget_ops omap_gadget_ops = {
+static const struct usb_gadget_ops omap_gadget_ops = {
.get_frame = omap_get_frame,
.wakeup = omap_wakeup,
.set_selfpowered = omap_set_selfpowered,
.vbus_session = omap_vbus_session,
.vbus_draw = omap_vbus_draw,
.pullup = omap_pullup,
- .start = omap_udc_start,
- .stop = omap_udc_stop,
+ .udc_start = omap_udc_start,
+ .udc_stop = omap_udc_stop,
};
/*-------------------------------------------------------------------------*/
@@ -2041,28 +2042,15 @@
|| cpu_is_omap7xx();
}
-static int omap_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int omap_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
int status = -ENODEV;
struct omap_ep *ep;
unsigned long flags;
- /* basic sanity tests */
- if (!udc)
- return -ENODEV;
- if (!driver
- /* FIXME if otg, check: driver->is_otg */
- || driver->max_speed < USB_SPEED_FULL
- || !bind || !driver->setup)
- return -EINVAL;
spin_lock_irqsave(&udc->lock, flags);
- if (udc->driver) {
- spin_unlock_irqrestore(&udc->lock, flags);
- return -EBUSY;
- }
-
/* reset state */
list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
ep->irqs = 0;
@@ -2084,15 +2072,6 @@
if (udc->dc_clk != NULL)
omap_udc_enable_clock(1);
- status = bind(&udc->gadget, driver);
- if (status) {
- DBG("bind to %s --> %d\n", driver->driver.name, status);
- udc->gadget.dev.driver = NULL;
- udc->driver = NULL;
- goto done;
- }
- DBG("bound to driver %s\n", driver->driver.name);
-
omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
/* connect to bus through transceiver */
@@ -2124,19 +2103,16 @@
done:
if (udc->dc_clk != NULL)
omap_udc_enable_clock(0);
+
return status;
}
-static int omap_udc_stop(struct usb_gadget_driver *driver)
+static int omap_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
unsigned long flags;
int status = -ENODEV;
- if (!udc)
- return -ENODEV;
- if (!driver || driver != udc->driver || !driver->unbind)
- return -EINVAL;
-
if (udc->dc_clk != NULL)
omap_udc_enable_clock(1);
@@ -2152,13 +2128,12 @@
udc_quiesce(udc);
spin_unlock_irqrestore(&udc->lock, flags);
- driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
udc->driver = NULL;
if (udc->dc_clk != NULL)
omap_udc_enable_clock(0);
- DBG("unregistered driver '%s'\n", driver->driver.name);
+
return status;
}
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 6490c00..a787a8e 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -375,6 +375,7 @@
struct pch_udc_cfg_data cfg_data;
struct pch_vbus_gpio_data vbus_gpio;
};
+#define to_pch_udc(g) (container_of((g), struct pch_udc_dev, gadget))
#define PCH_UDC_PCI_BAR 1
#define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808
@@ -384,7 +385,6 @@
static const char ep0_string[] = "ep0in";
static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */
-struct pch_udc_dev *pch_udc; /* pointer to device object */
static bool speed_fs;
module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
@@ -1235,9 +1235,10 @@
return -EOPNOTSUPP;
}
-static int pch_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int pch_udc_stop(struct usb_gadget_driver *driver);
+static int pch_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
+static int pch_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
static const struct usb_gadget_ops pch_udc_ops = {
.get_frame = pch_udc_pcd_get_frame,
.wakeup = pch_udc_pcd_wakeup,
@@ -1245,8 +1246,8 @@
.pullup = pch_udc_pcd_pullup,
.vbus_session = pch_udc_pcd_vbus_session,
.vbus_draw = pch_udc_pcd_vbus_draw,
- .start = pch_udc_start,
- .stop = pch_udc_stop,
+ .udc_start = pch_udc_start,
+ .udc_stop = pch_udc_stop,
};
/**
@@ -2981,40 +2982,15 @@
return 0;
}
-static int pch_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int pch_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct pch_udc_dev *dev = pch_udc;
- int retval;
+ struct pch_udc_dev *dev = to_pch_udc(g);
- if (!driver || (driver->max_speed == USB_SPEED_UNKNOWN) || !bind ||
- !driver->setup || !driver->unbind || !driver->disconnect) {
- dev_err(&dev->pdev->dev,
- "%s: invalid driver parameter\n", __func__);
- return -EINVAL;
- }
-
- if (!dev)
- return -ENODEV;
-
- if (dev->driver) {
- dev_err(&dev->pdev->dev, "%s: already bound\n", __func__);
- return -EBUSY;
- }
driver->driver.bus = NULL;
dev->driver = driver;
dev->gadget.dev.driver = &driver->driver;
- /* Invoke the bind routine of the gadget driver */
- retval = bind(&dev->gadget, driver);
-
- if (retval) {
- dev_err(&dev->pdev->dev, "%s: binding to %s returning %d\n",
- __func__, driver->driver.name, retval);
- dev->driver = NULL;
- dev->gadget.dev.driver = NULL;
- return retval;
- }
/* get ready for ep0 traffic */
pch_udc_setup_ep0(dev);
@@ -3026,30 +3002,21 @@
return 0;
}
-static int pch_udc_stop(struct usb_gadget_driver *driver)
+static int pch_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct pch_udc_dev *dev = pch_udc;
-
- if (!dev)
- return -ENODEV;
-
- if (!driver || (driver != dev->driver)) {
- dev_err(&dev->pdev->dev,
- "%s: invalid driver parameter\n", __func__);
- return -EINVAL;
- }
+ struct pch_udc_dev *dev = to_pch_udc(g);
pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
/* Assures that there are no pending requests with this driver */
- driver->disconnect(&dev->gadget);
- driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
dev->connected = 0;
/* set SD */
pch_udc_set_disconnect(dev);
+
return 0;
}
@@ -3164,11 +3131,6 @@
int retval;
struct pch_udc_dev *dev;
- /* one udc only */
- if (pch_udc) {
- pr_err("%s: already probed\n", __func__);
- return -EBUSY;
- }
/* init */
dev = kzalloc(sizeof *dev, GFP_KERNEL);
if (!dev) {
@@ -3207,7 +3169,6 @@
retval = -ENODEV;
goto finished;
}
- pch_udc = dev;
/* initialize the hardware */
if (pch_udc_pcd_init(dev)) {
retval = -ENODEV;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index d4ca9f1..fa9c344 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -996,9 +996,10 @@
return -EOPNOTSUPP;
}
-static int pxa25x_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int pxa25x_stop(struct usb_gadget_driver *driver);
+static int pxa25x_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
+static int pxa25x_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
static const struct usb_gadget_ops pxa25x_udc_ops = {
.get_frame = pxa25x_udc_get_frame,
@@ -1006,8 +1007,8 @@
.vbus_session = pxa25x_udc_vbus_session,
.pullup = pxa25x_udc_pullup,
.vbus_draw = pxa25x_udc_vbus_draw,
- .start = pxa25x_start,
- .stop = pxa25x_stop,
+ .udc_start = pxa25x_udc_start,
+ .udc_stop = pxa25x_udc_stop,
};
/*-------------------------------------------------------------------------*/
@@ -1254,23 +1255,12 @@
* disconnect is reported. then a host may connect again, or
* the driver might get unbound.
*/
-static int pxa25x_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int pxa25x_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct pxa25x_udc *dev = the_controller;
+ struct pxa25x_udc *dev = to_pxa25x(g);
int retval;
- if (!driver
- || driver->max_speed < USB_SPEED_FULL
- || !bind
- || !driver->disconnect
- || !driver->setup)
- return -EINVAL;
- if (!dev)
- return -ENODEV;
- if (dev->driver)
- return -EBUSY;
-
/* first hook up the driver ... */
dev->driver = driver;
dev->gadget.dev.driver = &driver->driver;
@@ -1278,34 +1268,20 @@
retval = device_add (&dev->gadget.dev);
if (retval) {
-fail:
dev->driver = NULL;
dev->gadget.dev.driver = NULL;
return retval;
}
- retval = bind(&dev->gadget, driver);
- if (retval) {
- DMSG("bind to driver %s --> error %d\n",
- driver->driver.name, retval);
- device_del (&dev->gadget.dev);
- goto fail;
- }
/* ... then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
*/
- DMSG("registered gadget driver '%s'\n", driver->driver.name);
-
/* connect to bus through transceiver */
if (!IS_ERR_OR_NULL(dev->transceiver)) {
retval = otg_set_peripheral(dev->transceiver->otg,
&dev->gadget);
- if (retval) {
- DMSG("can't bind to transceiver\n");
- if (driver->unbind)
- driver->unbind(&dev->gadget);
+ if (retval)
goto bind_fail;
- }
}
pullup(dev);
@@ -1334,22 +1310,14 @@
}
del_timer_sync(&dev->timer);
- /* report disconnect; the driver is already quiesced */
- if (driver)
- driver->disconnect(&dev->gadget);
-
/* re-init driver-visible data structures */
udc_reinit(dev);
}
-static int pxa25x_stop(struct usb_gadget_driver *driver)
+static int pxa25x_udc_stop(struct usb_gadget*g,
+ struct usb_gadget_driver *driver)
{
- struct pxa25x_udc *dev = the_controller;
-
- if (!dev)
- return -ENODEV;
- if (!driver || driver != dev->driver || !driver->unbind)
- return -EINVAL;
+ struct pxa25x_udc *dev = to_pxa25x(g);
local_irq_disable();
dev->pullup = 0;
@@ -1360,14 +1328,12 @@
if (!IS_ERR_OR_NULL(dev->transceiver))
(void) otg_set_peripheral(dev->transceiver->otg, NULL);
- driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
device_del (&dev->gadget.dev);
-
- DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
dump_state(dev);
+
return 0;
}
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index 2eca1e7..3fe5931 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -126,6 +126,7 @@
struct dentry *debugfs_udc;
#endif
};
+#define to_pxa25x(g) (container_of((g), struct pxa25x_udc, gadget))
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 2b3b01d..f7d2579 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1671,9 +1671,10 @@
return -EOPNOTSUPP;
}
-static int pxa27x_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int pxa27x_udc_stop(struct usb_gadget_driver *driver);
+static int pxa27x_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
+static int pxa27x_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
static const struct usb_gadget_ops pxa_udc_ops = {
.get_frame = pxa_udc_get_frame,
@@ -1681,8 +1682,8 @@
.pullup = pxa_udc_pullup,
.vbus_session = pxa_udc_vbus_session,
.vbus_draw = pxa_udc_vbus_draw,
- .start = pxa27x_udc_start,
- .stop = pxa27x_udc_stop,
+ .udc_start = pxa27x_udc_start,
+ .udc_stop = pxa27x_udc_stop,
};
/**
@@ -1802,20 +1803,12 @@
*
* Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
*/
-static int pxa27x_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int pxa27x_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct pxa_udc *udc = the_controller;
+ struct pxa_udc *udc = to_pxa(g);
int retval;
- if (!driver || driver->max_speed < USB_SPEED_FULL || !bind
- || !driver->disconnect || !driver->setup)
- return -EINVAL;
- if (!udc)
- return -ENODEV;
- if (udc->driver)
- return -EBUSY;
-
/* first hook up the driver ... */
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
@@ -1824,23 +1817,14 @@
retval = device_add(&udc->gadget.dev);
if (retval) {
dev_err(udc->dev, "device_add error %d\n", retval);
- goto add_fail;
+ goto fail;
}
- retval = bind(&udc->gadget, driver);
- if (retval) {
- dev_err(udc->dev, "bind to driver %s --> error %d\n",
- driver->driver.name, retval);
- goto bind_fail;
- }
- dev_dbg(udc->dev, "registered gadget driver '%s'\n",
- driver->driver.name);
-
if (!IS_ERR_OR_NULL(udc->transceiver)) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
if (retval) {
dev_err(udc->dev, "can't bind to transceiver\n");
- goto transceiver_fail;
+ goto fail;
}
}
@@ -1848,12 +1832,7 @@
udc_enable(udc);
return 0;
-transceiver_fail:
- if (driver->unbind)
- driver->unbind(&udc->gadget);
-bind_fail:
- device_del(&udc->gadget.dev);
-add_fail:
+fail:
udc->driver = NULL;
udc->gadget.dev.driver = NULL;
return retval;
@@ -1878,9 +1857,6 @@
for (i = 0; i < NR_USB_ENDPOINTS; i++)
pxa_ep_disable(&udc->udc_usb_ep[i].usb_ep);
-
- if (driver)
- driver->disconnect(&udc->gadget);
}
/**
@@ -1889,25 +1865,18 @@
*
* Returns 0 if no error, -ENODEV, -EINVAL otherwise
*/
-static int pxa27x_udc_stop(struct usb_gadget_driver *driver)
+static int pxa27x_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct pxa_udc *udc = the_controller;
-
- if (!udc)
- return -ENODEV;
- if (!driver || driver != udc->driver || !driver->unbind)
- return -EINVAL;
+ struct pxa_udc *udc = to_pxa(g);
stop_activity(udc, driver);
udc_disable(udc);
dplus_pullup(udc, 0);
- driver->unbind(&udc->gadget);
udc->driver = NULL;
device_del(&udc->gadget.dev);
- dev_info(udc->dev, "unregistered gadget driver '%s'\n",
- driver->driver.name);
if (!IS_ERR_OR_NULL(udc->transceiver))
return otg_set_peripheral(udc->transceiver->otg, NULL);
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index 79d81a4..28f2b53 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -473,6 +473,7 @@
struct dentry *debugfs_eps;
#endif
};
+#define to_pxa(g) (container_of((g), struct pxa_udc, gadget))
static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget)
{
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 5a80751..234838d 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -1812,7 +1812,7 @@
return 0;
}
-static struct usb_gadget_ops r8a66597_gadget_ops = {
+static const struct usb_gadget_ops r8a66597_gadget_ops = {
.get_frame = r8a66597_get_frame,
.udc_start = r8a66597_start,
.udc_stop = r8a66597_stop,
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 439c3f9..e1cd0f1 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3055,7 +3055,7 @@
return 0;
}
-static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
+static const struct usb_gadget_ops s3c_hsotg_gadget_ops = {
.get_frame = s3c_hsotg_gadget_getframe,
.udc_start = s3c_hsotg_udc_start,
.udc_stop = s3c_hsotg_udc_stop,
@@ -3572,7 +3572,7 @@
for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
hsotg->supplies[i].supply = s3c_hsotg_supply_names[i];
- ret = regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies),
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret) {
dev_err(dev, "failed to request supplies: %d\n", ret);
@@ -3662,8 +3662,6 @@
kfree(eps);
err_supplies:
s3c_hsotg_phy_disable(hsotg);
- regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
-
err_clk:
clk_disable_unprepare(hsotg->clk);
@@ -3688,7 +3686,6 @@
}
s3c_hsotg_phy_disable(hsotg);
- regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
clk_disable_unprepare(hsotg->clk);
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 52379b1..3ed5a39 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -435,7 +435,7 @@
struct s3c_hsudc_req *hsreq;
u32 csr;
- csr = readl((u32)hsudc->regs + S3C_ESR);
+ csr = readl(hsudc->regs + S3C_ESR);
if (csr & S3C_ESR_STALL) {
writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR);
return;
@@ -468,7 +468,7 @@
struct s3c_hsudc_req *hsreq;
u32 csr;
- csr = readl((u32)hsudc->regs + S3C_ESR);
+ csr = readl(hsudc->regs + S3C_ESR);
if (csr & S3C_ESR_STALL) {
writel(S3C_ESR_STALL, hsudc->regs + S3C_ESR);
return;
@@ -901,12 +901,12 @@
if (list_empty(&hsep->queue) && !hsep->stopped) {
offset = (ep_index(hsep)) ? S3C_ESR : S3C_EP0SR;
if (ep_is_in(hsep)) {
- csr = readl((u32)hsudc->regs + offset);
+ csr = readl(hsudc->regs + offset);
if (!(csr & S3C_ESR_TX_SUCCESS) &&
(s3c_hsudc_write_fifo(hsep, hsreq) == 1))
hsreq = NULL;
} else {
- csr = readl((u32)hsudc->regs + offset);
+ csr = readl(hsudc->regs + offset);
if ((csr & S3C_ESR_RX_SUCCESS)
&& (s3c_hsudc_read_fifo(hsep, hsreq) == 1))
hsreq = NULL;
@@ -1254,7 +1254,7 @@
return -EOPNOTSUPP;
}
-static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
+static const struct usb_gadget_ops s3c_hsudc_gadget_ops = {
.get_frame = s3c_hsudc_gadget_getframe,
.udc_start = s3c_hsudc_start,
.udc_stop = s3c_hsudc_stop,
@@ -1286,7 +1286,7 @@
for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
- ret = regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies),
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsudc->supplies),
hsudc->supplies);
if (ret != 0) {
dev_err(dev, "failed to request supplies: %d\n", ret);
@@ -1367,7 +1367,6 @@
if (!IS_ERR_OR_NULL(hsudc->transceiver))
usb_put_phy(hsudc->transceiver);
- regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
err_supplies:
return ret;
}
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index a2fa6e1..fc07b43 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1538,9 +1538,10 @@
return -ENOTSUPP;
}
-static int s3c2410_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
-static int s3c2410_udc_stop(struct usb_gadget_driver *driver);
+static int s3c2410_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
+static int s3c2410_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver);
static const struct usb_gadget_ops s3c2410_ops = {
.get_frame = s3c2410_udc_get_frame,
@@ -1549,8 +1550,8 @@
.pullup = s3c2410_udc_pullup,
.vbus_session = s3c2410_udc_vbus_session,
.vbus_draw = s3c2410_vbus_draw,
- .start = s3c2410_udc_start,
- .stop = s3c2410_udc_stop,
+ .udc_start = s3c2410_udc_start,
+ .udc_stop = s3c2410_udc_stop,
};
static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd)
@@ -1664,33 +1665,14 @@
s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
}
-static int s3c2410_udc_start(struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
+static int s3c2410_udc_start(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct s3c2410_udc *udc = the_controller;
+ struct s3c2410_udc *udc = to_s3c2410(g)
int retval;
dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name);
- /* Sanity checks */
- if (!udc)
- return -ENODEV;
-
- if (udc->driver)
- return -EBUSY;
-
- if (!bind || !driver->setup || driver->max_speed < USB_SPEED_FULL) {
- dev_err(&udc->gadget.dev, "Invalid driver: bind %p setup %p speed %d\n",
- bind, driver->setup, driver->max_speed);
- return -EINVAL;
- }
-#if defined(MODULE)
- if (!driver->unbind) {
- dev_err(&udc->gadget.dev, "Invalid driver: no unbind method\n");
- return -EINVAL;
- }
-#endif
-
/* Hook the driver */
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
@@ -1702,15 +1684,6 @@
goto register_error;
}
- dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n",
- driver->driver.name);
-
- retval = bind(&udc->gadget, driver);
- if (retval) {
- device_del(&udc->gadget.dev);
- goto register_error;
- }
-
/* Enable udc */
s3c2410_udc_enable(udc);
@@ -1722,24 +1695,10 @@
return retval;
}
-static int s3c2410_udc_stop(struct usb_gadget_driver *driver)
+static int s3c2410_udc_stop(struct usb_gadget *g,
+ struct usb_gadget_driver *driver)
{
- struct s3c2410_udc *udc = the_controller;
-
- if (!udc)
- return -ENODEV;
-
- if (!driver || driver != udc->driver || !driver->unbind)
- return -EINVAL;
-
- dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n",
- driver->driver.name);
-
- /* report disconnect */
- if (driver->disconnect)
- driver->disconnect(&udc->gadget);
-
- driver->unbind(&udc->gadget);
+ struct s3c2410_udc *udc = to_s3c2410(g);
device_del(&udc->gadget.dev);
udc->driver = NULL;
diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h
index 3e80fd5..93bf225 100644
--- a/drivers/usb/gadget/s3c2410_udc.h
+++ b/drivers/usb/gadget/s3c2410_udc.h
@@ -95,5 +95,6 @@
u8 vbus;
struct dentry *regs_info;
};
+#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget))
#endif
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 44752f5..68d7bb0 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -36,10 +36,8 @@
* the runtime footprint, and giving us at least some parts of what
* a "gcc --combine ... part1.c part2.c part3.c ... " build would.
*/
-#include "f_acm.c"
#include "f_obex.c"
#include "f_serial.c"
-#include "u_serial.c"
/*-------------------------------------------------------------------------*/
USB_GADGET_COMPOSITE_OPTIONS();
@@ -128,20 +126,25 @@
MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
/*-------------------------------------------------------------------------*/
+static unsigned char tty_lines[MAX_U_SERIAL_PORTS];
-static int __init serial_bind_config(struct usb_configuration *c)
+static int __init serial_bind_obex_config(struct usb_configuration *c)
{
unsigned i;
int status = 0;
- for (i = 0; i < n_ports && status == 0; i++) {
- if (use_acm)
- status = acm_bind_config(c, i);
- else if (use_obex)
- status = obex_bind_config(c, i);
- else
- status = gser_bind_config(c, i);
- }
+ for (i = 0; i < n_ports && status == 0; i++)
+ status = obex_bind_config(c, tty_lines[i]);
+ return status;
+}
+
+static int __init serial_bind_gser_config(struct usb_configuration *c)
+{
+ unsigned i;
+ int status = 0;
+
+ for (i = 0; i < n_ports && status == 0; i++)
+ status = gser_bind_config(c, tty_lines[i]);
return status;
}
@@ -152,13 +155,70 @@
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
};
+static struct usb_function_instance *fi_serial[MAX_U_SERIAL_PORTS];
+static struct usb_function *f_serial[MAX_U_SERIAL_PORTS];
+
+static int serial_register_ports(struct usb_composite_dev *cdev,
+ struct usb_configuration *c, const char *f_name)
+{
+ int i;
+ int ret;
+
+ ret = usb_add_config_only(cdev, c);
+ if (ret)
+ goto out;
+
+ for (i = 0; i < n_ports; i++) {
+ struct f_serial_opts *opts;
+
+ fi_serial[i] = usb_get_function_instance(f_name);
+ if (IS_ERR(fi_serial[i])) {
+ ret = PTR_ERR(fi_serial[i]);
+ goto fail;
+ }
+ opts = container_of(fi_serial[i], struct f_serial_opts, func_inst);
+ opts->port_num = tty_lines[i];
+
+ f_serial[i] = usb_get_function(fi_serial[i]);
+ if (IS_ERR(f_serial[i])) {
+ ret = PTR_ERR(f_serial[i]);
+ goto err_get_func;
+ }
+
+ ret = usb_add_function(c, f_serial[i]);
+ if (ret)
+ goto err_add_func;
+ }
+
+ return 0;
+
+err_add_func:
+ usb_put_function(f_serial[i]);
+err_get_func:
+ usb_put_function_instance(fi_serial[i]);
+
+fail:
+ i--;
+ while (i >= 0) {
+ usb_remove_function(c, f_serial[i]);
+ usb_put_function(f_serial[i]);
+ usb_put_function_instance(fi_serial[i]);
+ i--;
+ }
+out:
+ return ret;
+}
+
static int __init gs_bind(struct usb_composite_dev *cdev)
{
int status;
+ int cur_line;
- status = gserial_setup(cdev->gadget, n_ports);
- if (status < 0)
- return status;
+ for (cur_line = 0; cur_line < n_ports; cur_line++) {
+ status = gserial_alloc_line(&tty_lines[cur_line]);
+ if (status)
+ goto fail;
+ }
/* Allocate string descriptor numbers ... note that string
* contents can be overridden by the composite_dev glue.
@@ -178,8 +238,16 @@
}
/* register our configuration */
- status = usb_add_config(cdev, &serial_config_driver,
- serial_bind_config);
+ if (use_acm) {
+ status = serial_register_ports(cdev, &serial_config_driver,
+ "acm");
+ usb_ep_autoconfig_reset(cdev->gadget);
+ } else if (use_obex)
+ status = usb_add_config(cdev, &serial_config_driver,
+ serial_bind_obex_config);
+ else
+ status = usb_add_config(cdev, &serial_config_driver,
+ serial_bind_gser_config);
if (status < 0)
goto fail;
@@ -189,16 +257,31 @@
return 0;
fail:
- gserial_cleanup();
+ cur_line--;
+ while (cur_line >= 0)
+ gserial_free_line(tty_lines[cur_line--]);
return status;
}
+static int gs_unbind(struct usb_composite_dev *cdev)
+{
+ int i;
+
+ for (i = 0; i < n_ports; i++) {
+ usb_put_function(f_serial[i]);
+ usb_put_function_instance(fi_serial[i]);
+ gserial_free_line(tty_lines[i]);
+ }
+ return 0;
+}
+
static __refdata struct usb_composite_driver gserial_driver = {
.name = "g_serial",
.dev = &device_desc,
.strings = dev_strings,
.max_speed = USB_SPEED_SUPER,
.bind = gs_bind,
+ .unbind = gs_unbind,
};
static int __init init(void)
@@ -234,6 +317,5 @@
static void __exit cleanup(void)
{
usb_composite_unregister(&gserial_driver);
- gserial_cleanup();
}
module_exit(cleanup);
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 0e3ae43..4ecbf849 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -93,18 +93,6 @@
/*-------------------------------------------------------------------------*/
-/* CBI Interrupt data structure */
-struct interrupt_data {
- u8 bType;
- u8 bValue;
-};
-
-#define CBI_INTERRUPT_DATA_LEN 2
-
-/* CBI Accept Device-Specific Command request */
-#define USB_CBI_ADSC_REQUEST 0x00
-
-
/* Length of a SCSI Command Data Block */
#define MAX_COMMAND_SIZE 16
@@ -385,41 +373,6 @@
/*.bMaxBurst = DYNAMIC, */
};
-static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = {
- .bLength = USB_DT_USB_EXT_CAP_SIZE,
- .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
- .bDevCapabilityType = USB_CAP_TYPE_EXT,
-
- .bmAttributes = cpu_to_le32(USB_LPM_SUPPORT),
-};
-
-static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = {
- .bLength = USB_DT_USB_SS_CAP_SIZE,
- .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
- .bDevCapabilityType = USB_SS_CAP_TYPE,
-
- /* .bmAttributes = LTM is not supported yet */
-
- .wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION
- | USB_FULL_SPEED_OPERATION
- | USB_HIGH_SPEED_OPERATION
- | USB_5GBPS_OPERATION),
- .bFunctionalitySupport = USB_LOW_SPEED_OPERATION,
- .bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT,
- .bU2DevExitLat = cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT),
-};
-
-static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = {
- .bLength = USB_DT_BOS_SIZE,
- .bDescriptorType = USB_DT_BOS,
-
- .wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE
- + USB_DT_USB_EXT_CAP_SIZE
- + USB_DT_USB_SS_CAP_SIZE),
-
- .bNumDeviceCaps = 2,
-};
-
static struct usb_descriptor_header *fsg_ss_function[] = {
(struct usb_descriptor_header *) &fsg_intf_desc,
(struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
@@ -429,20 +382,6 @@
NULL,
};
-/* Maxpacket and other transfer characteristics vary by speed. */
-static __maybe_unused struct usb_endpoint_descriptor *
-fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
- struct usb_endpoint_descriptor *hs,
- struct usb_endpoint_descriptor *ss)
-{
- if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
- return ss;
- else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
- return hs;
- return fs;
-}
-
-
/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
static struct usb_string fsg_strings[] = {
{FSG_STRING_INTERFACE, fsg_string_interface},
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 598dcc1..588a9be 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -26,6 +26,7 @@
#include <linux/tty_flip.h>
#include <linux/slab.h>
#include <linux/export.h>
+#include <linux/module.h>
#include "u_serial.h"
@@ -35,11 +36,12 @@
* "serial port" functionality through the USB gadget stack. Each such
* port is exposed through a /dev/ttyGS* node.
*
- * After initialization (gserial_setup), these TTY port devices stay
- * available until they are removed (gserial_cleanup). Each one may be
- * connected to a USB function (gserial_connect), or disconnected (with
- * gserial_disconnect) when the USB host issues a config change event.
- * Data can only flow when the port is connected to the host.
+ * After this module has been loaded, the individual TTY port can be requested
+ * (gserial_alloc_line()) and it will stay available until they are removed
+ * (gserial_free_line()). Each one may be connected to a USB function
+ * (gserial_connect), or disconnected (with gserial_disconnect) when the USB
+ * host issues a config change event. Data can only flow when the port is
+ * connected to the host.
*
* A given TTY port can be made available in multiple configurations.
* For example, each one might expose a ttyGS0 node which provides a
@@ -119,13 +121,10 @@
struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
};
-/* increase N_PORTS if you need more */
-#define N_PORTS 4
static struct portmaster {
struct mutex lock; /* protect open/close */
struct gs_port *port;
-} ports[N_PORTS];
-static unsigned n_ports;
+} ports[MAX_U_SERIAL_PORTS];
#define GS_CLOSE_TIMEOUT 15 /* seconds */
@@ -309,6 +308,7 @@
return req;
}
+EXPORT_SYMBOL_GPL(gs_alloc_req);
/*
* gs_free_req
@@ -320,6 +320,7 @@
kfree(req->buf);
usb_ep_free_request(ep, req);
}
+EXPORT_SYMBOL_GPL(gs_free_req);
/*
* gs_send_packet
@@ -1030,10 +1031,19 @@
gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
{
struct gs_port *port;
+ int ret = 0;
+
+ mutex_lock(&ports[port_num].lock);
+ if (ports[port_num].port) {
+ ret = -EBUSY;
+ goto out;
+ }
port = kzalloc(sizeof(struct gs_port), GFP_KERNEL);
- if (port == NULL)
- return -ENOMEM;
+ if (port == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
tty_port_init(&port->port);
spin_lock_init(&port->port_lock);
@@ -1049,109 +1059,9 @@
port->port_line_coding = *coding;
ports[port_num].port = port;
-
- return 0;
-}
-
-/**
- * gserial_setup - initialize TTY driver for one or more ports
- * @g: gadget to associate with these ports
- * @count: how many ports to support
- * Context: may sleep
- *
- * The TTY stack needs to know in advance how many devices it should
- * plan to manage. Use this call to set up the ports you will be
- * exporting through USB. Later, connect them to functions based
- * on what configuration is activated by the USB host; and disconnect
- * them as appropriate.
- *
- * An example would be a two-configuration device in which both
- * configurations expose port 0, but through different functions.
- * One configuration could even expose port 1 while the other
- * one doesn't.
- *
- * Returns negative errno or zero.
- */
-int gserial_setup(struct usb_gadget *g, unsigned count)
-{
- unsigned i;
- struct usb_cdc_line_coding coding;
- int status;
-
- if (count == 0 || count > N_PORTS)
- return -EINVAL;
-
- gs_tty_driver = alloc_tty_driver(count);
- if (!gs_tty_driver)
- return -ENOMEM;
-
- gs_tty_driver->driver_name = "g_serial";
- gs_tty_driver->name = PREFIX;
- /* uses dynamically assigned dev_t values */
-
- gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
- gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
- gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- gs_tty_driver->init_termios = tty_std_termios;
-
- /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on
- * MS-Windows. Otherwise, most of these flags shouldn't affect
- * anything unless we were to actually hook up to a serial line.
- */
- gs_tty_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- gs_tty_driver->init_termios.c_ispeed = 9600;
- gs_tty_driver->init_termios.c_ospeed = 9600;
-
- coding.dwDTERate = cpu_to_le32(9600);
- coding.bCharFormat = 8;
- coding.bParityType = USB_CDC_NO_PARITY;
- coding.bDataBits = USB_CDC_1_STOP_BITS;
-
- tty_set_operations(gs_tty_driver, &gs_tty_ops);
-
- /* make devices be openable */
- for (i = 0; i < count; i++) {
- mutex_init(&ports[i].lock);
- status = gs_port_alloc(i, &coding);
- if (status) {
- count = i;
- goto fail;
- }
- }
- n_ports = count;
-
- /* export the driver ... */
- status = tty_register_driver(gs_tty_driver);
- if (status) {
- pr_err("%s: cannot register, err %d\n",
- __func__, status);
- goto fail;
- }
-
- /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
- for (i = 0; i < count; i++) {
- struct device *tty_dev;
-
- tty_dev = tty_port_register_device(&ports[i].port->port,
- gs_tty_driver, i, &g->dev);
- if (IS_ERR(tty_dev))
- pr_warning("%s: no classdev for port %d, err %ld\n",
- __func__, i, PTR_ERR(tty_dev));
- }
-
- pr_debug("%s: registered %d ttyGS* device%s\n", __func__,
- count, (count == 1) ? "" : "s");
-
- return status;
-fail:
- while (count--) {
- tty_port_destroy(&ports[count].port->port);
- kfree(ports[count].port);
- }
- put_tty_driver(gs_tty_driver);
- gs_tty_driver = NULL;
- return status;
+out:
+ mutex_unlock(&ports[port_num].lock);
+ return ret;
}
static int gs_closed(struct gs_port *port)
@@ -1164,55 +1074,77 @@
return cond;
}
-/**
- * gserial_cleanup - remove TTY-over-USB driver and devices
- * Context: may sleep
- *
- * This is called to free all resources allocated by @gserial_setup().
- * Accordingly, it may need to wait until some open /dev/ files have
- * closed.
- *
- * The caller must have issued @gserial_disconnect() for any ports
- * that had previously been connected, so that there is never any
- * I/O pending when it's called.
- */
-void gserial_cleanup(void)
+static void gserial_free_port(struct gs_port *port)
{
- unsigned i;
+ tasklet_kill(&port->push);
+ /* wait for old opens to finish */
+ wait_event(port->port.close_wait, gs_closed(port));
+ WARN_ON(port->port_usb != NULL);
+ tty_port_destroy(&port->port);
+ kfree(port);
+}
+
+void gserial_free_line(unsigned char port_num)
+{
struct gs_port *port;
- if (!gs_tty_driver)
+ mutex_lock(&ports[port_num].lock);
+ if (WARN_ON(!ports[port_num].port)) {
+ mutex_unlock(&ports[port_num].lock);
return;
-
- /* start sysfs and /dev/ttyGS* node removal */
- for (i = 0; i < n_ports; i++)
- tty_unregister_device(gs_tty_driver, i);
-
- for (i = 0; i < n_ports; i++) {
- /* prevent new opens */
- mutex_lock(&ports[i].lock);
- port = ports[i].port;
- ports[i].port = NULL;
- mutex_unlock(&ports[i].lock);
-
- tasklet_kill(&port->push);
-
- /* wait for old opens to finish */
- wait_event(port->port.close_wait, gs_closed(port));
-
- WARN_ON(port->port_usb != NULL);
-
- tty_port_destroy(&port->port);
- kfree(port);
}
- n_ports = 0;
+ port = ports[port_num].port;
+ ports[port_num].port = NULL;
+ mutex_unlock(&ports[port_num].lock);
- tty_unregister_driver(gs_tty_driver);
- put_tty_driver(gs_tty_driver);
- gs_tty_driver = NULL;
-
- pr_debug("%s: cleaned up ttyGS* support\n", __func__);
+ gserial_free_port(port);
+ tty_unregister_device(gs_tty_driver, port_num);
}
+EXPORT_SYMBOL_GPL(gserial_free_line);
+
+int gserial_alloc_line(unsigned char *line_num)
+{
+ struct usb_cdc_line_coding coding;
+ struct device *tty_dev;
+ int ret;
+ int port_num;
+
+ coding.dwDTERate = cpu_to_le32(9600);
+ coding.bCharFormat = 8;
+ coding.bParityType = USB_CDC_NO_PARITY;
+ coding.bDataBits = USB_CDC_1_STOP_BITS;
+
+ for (port_num = 0; port_num < MAX_U_SERIAL_PORTS; port_num++) {
+ ret = gs_port_alloc(port_num, &coding);
+ if (ret == -EBUSY)
+ continue;
+ if (ret)
+ return ret;
+ break;
+ }
+ if (ret)
+ return ret;
+
+ /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
+
+ tty_dev = tty_port_register_device(&ports[port_num].port->port,
+ gs_tty_driver, port_num, NULL);
+ if (IS_ERR(tty_dev)) {
+ struct gs_port *port;
+ pr_err("%s: failed to register tty for port %d, err %ld\n",
+ __func__, port_num, PTR_ERR(tty_dev));
+
+ ret = PTR_ERR(tty_dev);
+ port = ports[port_num].port;
+ ports[port_num].port = NULL;
+ gserial_free_port(port);
+ goto err;
+ }
+ *line_num = port_num;
+err:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(gserial_alloc_line);
/**
* gserial_connect - notify TTY I/O glue that USB link is active
@@ -1229,8 +1161,8 @@
*
* Caller needs to have set up the endpoints and USB function in @dev
* before calling this, as well as the appropriate (speed-specific)
- * endpoint descriptors, and also have set up the TTY driver by calling
- * @gserial_setup().
+ * endpoint descriptors, and also have allocate @port_num by calling
+ * @gserial_alloc_line().
*
* Returns negative errno or zero.
* On success, ep->driver_data will be overwritten.
@@ -1241,11 +1173,18 @@
unsigned long flags;
int status;
- if (!gs_tty_driver || port_num >= n_ports)
+ if (port_num >= MAX_U_SERIAL_PORTS)
return -ENXIO;
- /* we "know" gserial_cleanup() hasn't been called */
port = ports[port_num].port;
+ if (!port) {
+ pr_err("serial line %d not allocated.\n", port_num);
+ return -EINVAL;
+ }
+ if (port->port_usb) {
+ pr_err("serial line %d is in use.\n", port_num);
+ return -EBUSY;
+ }
/* activate the endpoints */
status = usb_ep_enable(gser->in);
@@ -1292,7 +1231,7 @@
gser->in->driver_data = NULL;
return status;
}
-
+EXPORT_SYMBOL_GPL(gserial_connect);
/**
* gserial_disconnect - notify TTY I/O glue that USB link is inactive
* @gser: the function, on which gserial_connect() was called
@@ -1347,3 +1286,65 @@
spin_unlock_irqrestore(&port->port_lock, flags);
}
+EXPORT_SYMBOL_GPL(gserial_disconnect);
+
+static int userial_init(void)
+{
+ unsigned i;
+ int status;
+
+ gs_tty_driver = alloc_tty_driver(MAX_U_SERIAL_PORTS);
+ if (!gs_tty_driver)
+ return -ENOMEM;
+
+ gs_tty_driver->driver_name = "g_serial";
+ gs_tty_driver->name = PREFIX;
+ /* uses dynamically assigned dev_t values */
+
+ gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+ gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ gs_tty_driver->init_termios = tty_std_termios;
+
+ /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on
+ * MS-Windows. Otherwise, most of these flags shouldn't affect
+ * anything unless we were to actually hook up to a serial line.
+ */
+ gs_tty_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ gs_tty_driver->init_termios.c_ispeed = 9600;
+ gs_tty_driver->init_termios.c_ospeed = 9600;
+
+ tty_set_operations(gs_tty_driver, &gs_tty_ops);
+ for (i = 0; i < MAX_U_SERIAL_PORTS; i++)
+ mutex_init(&ports[i].lock);
+
+ /* export the driver ... */
+ status = tty_register_driver(gs_tty_driver);
+ if (status) {
+ pr_err("%s: cannot register, err %d\n",
+ __func__, status);
+ goto fail;
+ }
+
+ pr_debug("%s: registered %d ttyGS* device%s\n", __func__,
+ MAX_U_SERIAL_PORTS,
+ (MAX_U_SERIAL_PORTS == 1) ? "" : "s");
+
+ return status;
+fail:
+ put_tty_driver(gs_tty_driver);
+ gs_tty_driver = NULL;
+ return status;
+}
+module_init(userial_init);
+
+static void userial_cleanup(void)
+{
+ tty_unregister_driver(gs_tty_driver);
+ put_tty_driver(gs_tty_driver);
+ gs_tty_driver = NULL;
+}
+module_exit(userial_cleanup);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h
index 9b0fe64..66ce73a 100644
--- a/drivers/usb/gadget/u_serial.h
+++ b/drivers/usb/gadget/u_serial.h
@@ -15,6 +15,13 @@
#include <linux/usb/composite.h>
#include <linux/usb/cdc.h>
+#define MAX_U_SERIAL_PORTS 4
+
+struct f_serial_opts {
+ struct usb_function_instance func_inst;
+ u8 port_num;
+};
+
/*
* One non-multiplexed "serial" I/O port ... there can be several of these
* on any given USB peripheral device, if it provides enough endpoints.
@@ -49,9 +56,9 @@
struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags);
void gs_free_req(struct usb_ep *, struct usb_request *req);
-/* port setup/teardown is handled by gadget driver */
-int gserial_setup(struct usb_gadget *g, unsigned n_ports);
-void gserial_cleanup(void);
+/* management of individual TTY ports */
+int gserial_alloc_line(unsigned char *port_line);
+void gserial_free_line(unsigned char port_line);
/* connect/disconnect is handled by individual functions */
int gserial_connect(struct gserial *, u8 port_num);
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 4d90a80..2a9cd36 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -102,28 +102,6 @@
/* ------------------------------------------------------------------------- */
/**
- * usb_gadget_start - tells usb device controller to start up
- * @gadget: The gadget we want to get started
- * @driver: The driver we want to bind to @gadget
- * @bind: The bind function for @driver
- *
- * This call is issued by the UDC Class driver when it's about
- * to register a gadget driver to the device controller, before
- * calling gadget driver's bind() method.
- *
- * It allows the controller to be powered off until strictly
- * necessary to have it powered on.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int usb_gadget_start(struct usb_gadget *gadget,
- struct usb_gadget_driver *driver,
- int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
-{
- return gadget->ops->start(driver, bind);
-}
-
-/**
* usb_gadget_udc_start - tells usb device controller to start up
* @gadget: The gadget we want to get started
* @driver: The driver we want to bind to @gadget
@@ -144,24 +122,6 @@
}
/**
- * usb_gadget_stop - tells usb device controller we don't need it anymore
- * @gadget: The device we want to stop activity
- * @driver: The driver to unbind from @gadget
- *
- * This call is issued by the UDC Class driver after calling
- * gadget driver's unbind() method.
- *
- * The details are implementation specific, but it can go as
- * far as powering off UDC completely and disable its data
- * line pullups.
- */
-static inline void usb_gadget_stop(struct usb_gadget *gadget,
- struct usb_gadget_driver *driver)
-{
- gadget->ops->stop(driver);
-}
-
-/**
* usb_gadget_udc_stop - tells usb device controller we don't need it anymore
* @gadget: The device we want to stop activity
* @driver: The driver to unbind from @gadget
@@ -246,14 +206,6 @@
}
EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
-static int udc_is_newstyle(struct usb_udc *udc)
-{
- if (udc->gadget->ops->udc_start && udc->gadget->ops->udc_stop)
- return 1;
- return 0;
-}
-
-
static void usb_gadget_remove_driver(struct usb_udc *udc)
{
dev_dbg(&udc->dev, "unregistering UDC driver [%s]\n",
@@ -261,14 +213,10 @@
kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
- if (udc_is_newstyle(udc)) {
- usb_gadget_disconnect(udc->gadget);
- udc->driver->disconnect(udc->gadget);
- udc->driver->unbind(udc->gadget);
- usb_gadget_udc_stop(udc->gadget, udc->driver);
- } else {
- usb_gadget_stop(udc->gadget, udc->driver);
- }
+ usb_gadget_disconnect(udc->gadget);
+ udc->driver->disconnect(udc->gadget);
+ udc->driver->unbind(udc->gadget);
+ usb_gadget_udc_stop(udc->gadget, udc->driver);
udc->driver = NULL;
udc->dev.driver = NULL;
@@ -311,6 +259,62 @@
/* ------------------------------------------------------------------------- */
+static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *driver)
+{
+ int ret;
+
+ dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
+ driver->function);
+
+ udc->driver = driver;
+ udc->dev.driver = &driver->driver;
+
+ ret = driver->bind(udc->gadget, driver);
+ if (ret)
+ goto err1;
+ ret = usb_gadget_udc_start(udc->gadget, driver);
+ if (ret) {
+ driver->unbind(udc->gadget);
+ goto err1;
+ }
+ usb_gadget_connect(udc->gadget);
+
+ kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+ return 0;
+err1:
+ dev_err(&udc->dev, "failed to start %s: %d\n",
+ udc->driver->function, ret);
+ udc->driver = NULL;
+ udc->dev.driver = NULL;
+ return ret;
+}
+
+int udc_attach_driver(const char *name, struct usb_gadget_driver *driver)
+{
+ struct usb_udc *udc = NULL;
+ int ret = -ENODEV;
+
+ mutex_lock(&udc_lock);
+ list_for_each_entry(udc, &udc_list, list) {
+ ret = strcmp(name, dev_name(&udc->dev));
+ if (!ret)
+ break;
+ }
+ if (ret) {
+ ret = -ENODEV;
+ goto out;
+ }
+ if (udc->driver) {
+ ret = -EBUSY;
+ goto out;
+ }
+ ret = udc_bind_to_driver(udc, driver);
+out:
+ mutex_unlock(&udc_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(udc_attach_driver);
+
int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
{
struct usb_udc *udc = NULL;
@@ -329,41 +333,8 @@
pr_debug("couldn't find an available UDC\n");
mutex_unlock(&udc_lock);
return -ENODEV;
-
found:
- dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
- driver->function);
-
- udc->driver = driver;
- udc->dev.driver = &driver->driver;
-
- if (udc_is_newstyle(udc)) {
- ret = driver->bind(udc->gadget, driver);
- if (ret)
- goto err1;
- ret = usb_gadget_udc_start(udc->gadget, driver);
- if (ret) {
- driver->unbind(udc->gadget);
- goto err1;
- }
- usb_gadget_connect(udc->gadget);
- } else {
-
- ret = usb_gadget_start(udc->gadget, driver, driver->bind);
- if (ret)
- goto err1;
-
- }
-
- kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
- mutex_unlock(&udc_lock);
- return 0;
-
-err1:
- dev_err(&udc->dev, "failed to start %s: %d\n",
- udc->driver->function, ret);
- udc->driver = NULL;
- udc->dev.driver = NULL;
+ ret = udc_bind_to_driver(udc, driver);
mutex_unlock(&udc_lock);
return ret;
}
@@ -410,13 +381,11 @@
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
if (sysfs_streq(buf, "connect")) {
- if (udc_is_newstyle(udc))
- usb_gadget_udc_start(udc->gadget, udc->driver);
+ usb_gadget_udc_start(udc->gadget, udc->driver);
usb_gadget_connect(udc->gadget);
} else if (sysfs_streq(buf, "disconnect")) {
usb_gadget_disconnect(udc->gadget);
- if (udc_is_newstyle(udc))
- usb_gadget_udc_stop(udc->gadget, udc->driver);
+ usb_gadget_udc_stop(udc->gadget, udc->driver);
} else {
dev_err(dev, "unsupported command '%s'\n", buf);
return -EINVAL;
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index 69cf5c2..8cef1e6 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -336,7 +336,7 @@
.bConfigurationValue = 1,
.iConfiguration = 0, /* dynamic */
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
+ .MaxPower = CONFIG_USB_GADGET_VBUS_DRAW,
};
static int /* __init_or_exit */
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 6bf4c06..685fa68 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -10,7 +10,6 @@
* (at your option) any later version.
*/
-
/*
* Gadget Zero only needs two bulk endpoints, and is an example of how you
* can write a hardware-agnostic gadget driver running inside a USB device.
@@ -43,23 +42,11 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/usb/composite.h>
#include "g_zero.h"
-#include "gadget_chips.h"
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module. So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "f_sourcesink.c"
-#include "f_loopback.c"
-
/*-------------------------------------------------------------------------*/
USB_GADGET_COMPOSITE_OPTIONS();
@@ -67,9 +54,6 @@
static const char longname[] = "Gadget Zero";
-unsigned buflen = 4096; /* only used for bulk endpoints */
-module_param(buflen, uint, 0);
-
/*
* Normally the "loopback" configuration is second (index 1) so
* it's not the default. Here's where to change that order, to
@@ -79,6 +63,13 @@
static bool loopdefault = 0;
module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
+static struct usb_zero_options gzero_options = {
+ .isoc_interval = 4,
+ .isoc_maxpacket = 1024,
+ .bulk_buflen = 4096,
+ .qlen = 32,
+};
+
/*-------------------------------------------------------------------------*/
/* Thanks to NetChip Technologies for donating this product ID.
@@ -129,20 +120,27 @@
.bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
};
-const struct usb_descriptor_header *otg_desc[] = {
+static const struct usb_descriptor_header *otg_desc[] = {
(struct usb_descriptor_header *) &otg_descriptor,
NULL,
};
+#else
+#define otg_desc NULL
#endif
/* string IDs are assigned dynamically */
/* default serial number takes at least two packets */
static char serial[] = "0123456789.0123456789.0123456789";
+#define USB_GZERO_SS_DESC (USB_GADGET_FIRST_AVAIL_IDX + 0)
+#define USB_GZERO_LB_DESC (USB_GADGET_FIRST_AVAIL_IDX + 1)
+
static struct usb_string strings_dev[] = {
[USB_GADGET_MANUFACTURER_IDX].s = "",
[USB_GADGET_PRODUCT_IDX].s = longname,
[USB_GADGET_SERIAL_IDX].s = serial,
+ [USB_GZERO_SS_DESC].s = "source and sink data",
+ [USB_GZERO_LB_DESC].s = "loop input to output",
{ } /* end of list */
};
@@ -158,58 +156,6 @@
/*-------------------------------------------------------------------------*/
-struct usb_request *alloc_ep_req(struct usb_ep *ep, int len)
-{
- struct usb_request *req;
-
- req = usb_ep_alloc_request(ep, GFP_ATOMIC);
- if (req) {
- if (len)
- req->length = len;
- else
- req->length = buflen;
- req->buf = kmalloc(req->length, GFP_ATOMIC);
- if (!req->buf) {
- usb_ep_free_request(ep, req);
- req = NULL;
- }
- }
- return req;
-}
-
-void free_ep_req(struct usb_ep *ep, struct usb_request *req)
-{
- kfree(req->buf);
- usb_ep_free_request(ep, req);
-}
-
-static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
-{
- int value;
-
- if (ep->driver_data) {
- value = usb_ep_disable(ep);
- if (value < 0)
- DBG(cdev, "disable %s --> %d\n",
- ep->name, value);
- ep->driver_data = NULL;
- }
-}
-
-void disable_endpoints(struct usb_composite_dev *cdev,
- struct usb_ep *in, struct usb_ep *out,
- struct usb_ep *iso_in, struct usb_ep *iso_out)
-{
- disable_ep(cdev, in);
- disable_ep(cdev, out);
- if (iso_in)
- disable_ep(cdev, iso_in);
- if (iso_out)
- disable_ep(cdev, iso_out);
-}
-
-/*-------------------------------------------------------------------------*/
-
static struct timer_list autoresume_timer;
static void zero_autoresume(unsigned long _c)
@@ -251,8 +197,65 @@
/*-------------------------------------------------------------------------*/
+static struct usb_configuration loopback_driver = {
+ .label = "loopback",
+ .bConfigurationValue = 2,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ /* .iConfiguration = DYNAMIC */
+};
+
+static struct usb_function *func_ss;
+static struct usb_function_instance *func_inst_ss;
+
+static int ss_config_setup(struct usb_configuration *c,
+ const struct usb_ctrlrequest *ctrl)
+{
+ switch (ctrl->bRequest) {
+ case 0x5b:
+ case 0x5c:
+ return func_ss->setup(func_ss, ctrl);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static struct usb_configuration sourcesink_driver = {
+ .label = "source/sink",
+ .setup = ss_config_setup,
+ .bConfigurationValue = 3,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ /* .iConfiguration = DYNAMIC */
+};
+
+module_param_named(buflen, gzero_options.bulk_buflen, uint, 0);
+module_param_named(pattern, gzero_options.pattern, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none");
+
+module_param_named(isoc_interval, gzero_options.isoc_interval, uint,
+ S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_interval, "1 - 16");
+
+module_param_named(isoc_maxpacket, gzero_options.isoc_maxpacket, uint,
+ S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
+
+module_param_named(isoc_mult, gzero_options.isoc_mult, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)");
+
+module_param_named(isoc_maxburst, gzero_options.isoc_maxburst, uint,
+ S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)");
+
+static struct usb_function *func_lb;
+static struct usb_function_instance *func_inst_lb;
+
+module_param_named(qlen, gzero_options.qlen, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(qlen, "depth of loopback queue");
+
static int __init zero_bind(struct usb_composite_dev *cdev)
{
+ struct f_ss_opts *ss_opts;
+ struct f_lb_opts *lb_opts;
int status;
/* Allocate string descriptor numbers ... note that string
@@ -268,27 +271,105 @@
setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev);
+ func_inst_ss = usb_get_function_instance("SourceSink");
+ if (IS_ERR(func_inst_ss))
+ return PTR_ERR(func_inst_ss);
+
+ ss_opts = container_of(func_inst_ss, struct f_ss_opts, func_inst);
+ ss_opts->pattern = gzero_options.pattern;
+ ss_opts->isoc_interval = gzero_options.isoc_interval;
+ ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket;
+ ss_opts->isoc_mult = gzero_options.isoc_mult;
+ ss_opts->isoc_maxburst = gzero_options.isoc_maxpacket;
+ ss_opts->bulk_buflen = gzero_options.bulk_buflen;
+
+ func_ss = usb_get_function(func_inst_ss);
+ if (IS_ERR(func_ss))
+ goto err_put_func_inst_ss;
+
+ func_inst_lb = usb_get_function_instance("Loopback");
+ if (IS_ERR(func_inst_lb))
+ goto err_put_func_ss;
+
+ lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst);
+ lb_opts->bulk_buflen = gzero_options.bulk_buflen;
+ lb_opts->qlen = gzero_options.qlen;
+
+ func_lb = usb_get_function(func_inst_lb);
+ if (IS_ERR(func_lb)) {
+ status = PTR_ERR(func_lb);
+ goto err_put_func_inst_lb;
+ }
+
+ sourcesink_driver.iConfiguration = strings_dev[USB_GZERO_SS_DESC].id;
+ loopback_driver.iConfiguration = strings_dev[USB_GZERO_LB_DESC].id;
+
+ /* support autoresume for remote wakeup testing */
+ sourcesink_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP;
+ loopback_driver.bmAttributes &= ~USB_CONFIG_ATT_WAKEUP;
+ sourcesink_driver.descriptors = NULL;
+ loopback_driver.descriptors = NULL;
+ if (autoresume) {
+ sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ /* support OTG systems */
+ if (gadget_is_otg(cdev->gadget)) {
+ sourcesink_driver.descriptors = otg_desc;
+ sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ loopback_driver.descriptors = otg_desc;
+ loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
/* Register primary, then secondary configuration. Note that
* SH3 only allows one config...
*/
if (loopdefault) {
- loopback_add(cdev, autoresume != 0);
- sourcesink_add(cdev, autoresume != 0);
+ usb_add_config_only(cdev, &loopback_driver);
+ usb_add_config_only(cdev, &sourcesink_driver);
} else {
- sourcesink_add(cdev, autoresume != 0);
- loopback_add(cdev, autoresume != 0);
+ usb_add_config_only(cdev, &sourcesink_driver);
+ usb_add_config_only(cdev, &loopback_driver);
}
+ status = usb_add_function(&sourcesink_driver, func_ss);
+ if (status)
+ goto err_conf_flb;
+ usb_ep_autoconfig_reset(cdev->gadget);
+ status = usb_add_function(&loopback_driver, func_lb);
+ if (status)
+ goto err_conf_flb;
+
+ usb_ep_autoconfig_reset(cdev->gadget);
usb_composite_overwrite_options(cdev, &coverwrite);
INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
return 0;
+
+err_conf_flb:
+ usb_put_function(func_lb);
+ func_lb = NULL;
+err_put_func_inst_lb:
+ usb_put_function_instance(func_inst_lb);
+ func_inst_lb = NULL;
+err_put_func_ss:
+ usb_put_function(func_ss);
+ func_ss = NULL;
+err_put_func_inst_ss:
+ usb_put_function_instance(func_inst_ss);
+ func_inst_ss = NULL;
+ return status;
}
static int zero_unbind(struct usb_composite_dev *cdev)
{
del_timer_sync(&autoresume_timer);
+ if (!IS_ERR_OR_NULL(func_ss))
+ usb_put_function(func_ss);
+ if (!IS_ERR_OR_NULL(func_lb))
+ usb_put_function(func_lb);
return 0;
}
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 6c56297..3065809 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -302,7 +302,6 @@
{
struct ehci_hcd_mv *ehci_mv = platform_get_drvdata(pdev);
struct usb_hcd *hcd = ehci_mv->hcd;
- int clk_i;
if (hcd->rh_registered)
usb_remove_hcd(hcd);
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index eace975..da2d60c 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -662,18 +662,9 @@
int mv_otg_remove(struct platform_device *pdev)
{
struct mv_otg *mvotg = platform_get_drvdata(pdev);
- int clk_i;
sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group);
- if (mvotg->irq)
- free_irq(mvotg->irq, mvotg);
-
- if (mvotg->pdata->vbus)
- free_irq(mvotg->pdata->vbus->irq, mvotg);
- if (mvotg->pdata->id)
- free_irq(mvotg->pdata->id->irq, mvotg);
-
if (mvotg->qwork) {
flush_workqueue(mvotg->qwork);
destroy_workqueue(mvotg->qwork);
@@ -681,21 +672,9 @@
mv_otg_disable(mvotg);
- if (mvotg->cap_regs)
- iounmap(mvotg->cap_regs);
-
- if (mvotg->phy_regs)
- iounmap(mvotg->phy_regs);
-
- for (clk_i = 0; clk_i <= mvotg->clknum; clk_i++)
- clk_put(mvotg->clk[clk_i]);
-
usb_remove_phy(&mvotg->phy);
platform_set_drvdata(pdev, NULL);
- kfree(mvotg->phy.otg);
- kfree(mvotg);
-
return 0;
}
@@ -714,17 +693,15 @@
}
size = sizeof(*mvotg) + sizeof(struct clk *) * pdata->clknum;
- mvotg = kzalloc(size, GFP_KERNEL);
+ mvotg = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!mvotg) {
dev_err(&pdev->dev, "failed to allocate memory!\n");
return -ENOMEM;
}
- otg = kzalloc(sizeof *otg, GFP_KERNEL);
- if (!otg) {
- kfree(mvotg);
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
return -ENOMEM;
- }
platform_set_drvdata(pdev, mvotg);
@@ -733,18 +710,18 @@
mvotg->clknum = pdata->clknum;
for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) {
- mvotg->clk[clk_i] = clk_get(&pdev->dev, pdata->clkname[clk_i]);
+ mvotg->clk[clk_i] = devm_clk_get(&pdev->dev,
+ pdata->clkname[clk_i]);
if (IS_ERR(mvotg->clk[clk_i])) {
retval = PTR_ERR(mvotg->clk[clk_i]);
- goto err_put_clk;
+ return retval;
}
}
mvotg->qwork = create_singlethread_workqueue("mv_otg_queue");
if (!mvotg->qwork) {
dev_dbg(&pdev->dev, "cannot create workqueue for OTG\n");
- retval = -ENOMEM;
- goto err_put_clk;
+ return -ENOMEM;
}
INIT_DELAYED_WORK(&mvotg->work, mv_otg_work);
@@ -772,7 +749,7 @@
goto err_destroy_workqueue;
}
- mvotg->phy_regs = ioremap(r->start, resource_size(r));
+ mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (mvotg->phy_regs == NULL) {
dev_err(&pdev->dev, "failed to map phy I/O memory\n");
retval = -EFAULT;
@@ -784,21 +761,21 @@
if (r == NULL) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
retval = -ENODEV;
- goto err_unmap_phyreg;
+ goto err_destroy_workqueue;
}
- mvotg->cap_regs = ioremap(r->start, resource_size(r));
+ mvotg->cap_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (mvotg->cap_regs == NULL) {
dev_err(&pdev->dev, "failed to map I/O memory\n");
retval = -EFAULT;
- goto err_unmap_phyreg;
+ goto err_destroy_workqueue;
}
/* we will acces controller register, so enable the udc controller */
retval = mv_otg_enable_internal(mvotg);
if (retval) {
dev_err(&pdev->dev, "mv otg enable error %d\n", retval);
- goto err_unmap_capreg;
+ goto err_destroy_workqueue;
}
mvotg->op_regs =
@@ -806,9 +783,9 @@
+ (readl(mvotg->cap_regs) & CAPLENGTH_MASK));
if (pdata->id) {
- retval = request_threaded_irq(pdata->id->irq, NULL,
- mv_otg_inputs_irq,
- IRQF_ONESHOT, "id", mvotg);
+ retval = devm_request_threaded_irq(&pdev->dev, pdata->id->irq,
+ NULL, mv_otg_inputs_irq,
+ IRQF_ONESHOT, "id", mvotg);
if (retval) {
dev_info(&pdev->dev,
"Failed to request irq for ID\n");
@@ -818,9 +795,9 @@
if (pdata->vbus) {
mvotg->clock_gating = 1;
- retval = request_threaded_irq(pdata->vbus->irq, NULL,
- mv_otg_inputs_irq,
- IRQF_ONESHOT, "vbus", mvotg);
+ retval = devm_request_threaded_irq(&pdev->dev, pdata->vbus->irq,
+ NULL, mv_otg_inputs_irq,
+ IRQF_ONESHOT, "vbus", mvotg);
if (retval) {
dev_info(&pdev->dev,
"Failed to request irq for VBUS, "
@@ -844,7 +821,7 @@
}
mvotg->irq = r->start;
- if (request_irq(mvotg->irq, mv_otg_irq, IRQF_SHARED,
+ if (devm_request_irq(&pdev->dev, mvotg->irq, mv_otg_irq, IRQF_SHARED,
driver_name, mvotg)) {
dev_err(&pdev->dev, "Request irq %d for OTG failed\n",
mvotg->irq);
@@ -857,14 +834,14 @@
if (retval < 0) {
dev_err(&pdev->dev, "can't register transceiver, %d\n",
retval);
- goto err_free_irq;
+ goto err_disable_clk;
}
retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group);
if (retval < 0) {
dev_dbg(&pdev->dev,
"Can't register sysfs attr group: %d\n", retval);
- goto err_set_transceiver;
+ goto err_remove_phy;
}
spin_lock_init(&mvotg->wq_lock);
@@ -879,30 +856,15 @@
return 0;
-err_set_transceiver:
+err_remove_phy:
usb_remove_phy(&mvotg->phy);
-err_free_irq:
- free_irq(mvotg->irq, mvotg);
err_disable_clk:
- if (pdata->vbus)
- free_irq(pdata->vbus->irq, mvotg);
- if (pdata->id)
- free_irq(pdata->id->irq, mvotg);
mv_otg_disable_internal(mvotg);
-err_unmap_capreg:
- iounmap(mvotg->cap_regs);
-err_unmap_phyreg:
- iounmap(mvotg->phy_regs);
err_destroy_workqueue:
flush_workqueue(mvotg->qwork);
destroy_workqueue(mvotg->qwork);
-err_put_clk:
- for (clk_i--; clk_i >= 0; clk_i--)
- clk_put(mvotg->clk[clk_i]);
platform_set_drvdata(pdev, NULL);
- kfree(otg);
- kfree(mvotg);
return retval;
}
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index f2985cd..78fca97 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -900,7 +900,7 @@
return 0;
}
-static struct usb_gadget_ops usbhsg_gadget_ops = {
+static const struct usb_gadget_ops usbhsg_gadget_ops = {
.get_frame = usbhsg_get_frame,
.set_selfpowered = usbhsg_set_selfpowered,
.udc_start = usbhsg_gadget_start,
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index b09c37e..3c671c1 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -77,6 +77,8 @@
* in interface or class descriptors; endpoints; I/O buffers; and so on.
* @unbind: Reverses @bind; called as a side effect of unregistering the
* driver which added this function.
+ * @free_func: free the struct usb_function.
+ * @mod: (internal) points to the module that created this structure.
* @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
* initialize usb_ep.driver data at this time (when it is used).
* Note that setting an interface to its current altsetting resets
@@ -116,6 +118,7 @@
* two or more distinct instances within the same configuration, providing
* several independent logical data links to a USB host.
*/
+
struct usb_function {
const char *name;
struct usb_gadget_strings **strings;
@@ -136,6 +139,8 @@
struct usb_function *);
void (*unbind)(struct usb_configuration *,
struct usb_function *);
+ void (*free_func)(struct usb_function *f);
+ struct module *mod;
/* runtime state management */
int (*set_alt)(struct usb_function *,
@@ -156,6 +161,7 @@
/* internals */
struct list_head list;
DECLARE_BITMAP(endpoints, 32);
+ const struct usb_function_instance *fi;
};
int usb_add_function(struct usb_configuration *, struct usb_function *);
@@ -184,7 +190,8 @@
* @bConfigurationValue: Copied into configuration descriptor.
* @iConfiguration: Copied into configuration descriptor.
* @bmAttributes: Copied into configuration descriptor.
- * @bMaxPower: Copied into configuration descriptor.
+ * @MaxPower: Power consumtion in mA. Used to compute bMaxPower in the
+ * configuration descriptor after considering the bus speed.
* @cdev: assigned by @usb_add_config() before calling @bind(); this is
* the device associated with this configuration.
*
@@ -230,7 +237,7 @@
u8 bConfigurationValue;
u8 iConfiguration;
u8 bmAttributes;
- u8 bMaxPower;
+ u16 MaxPower;
struct usb_composite_dev *cdev;
@@ -316,7 +323,15 @@
extern int usb_composite_probe(struct usb_composite_driver *driver);
extern void usb_composite_unregister(struct usb_composite_driver *driver);
extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
+extern int composite_dev_prepare(struct usb_composite_driver *composite,
+ struct usb_composite_dev *cdev);
+void composite_dev_cleanup(struct usb_composite_dev *cdev);
+static inline struct usb_composite_driver *to_cdriver(
+ struct usb_gadget_driver *gdrv)
+{
+ return container_of(gdrv, struct usb_composite_driver, gadget_driver);
+}
/**
* struct usb_composite_device - represents one composite usb gadget
@@ -360,6 +375,7 @@
unsigned int suspended:1;
struct usb_device_descriptor desc;
struct list_head configs;
+ struct list_head gstrings;
struct usb_composite_driver *driver;
u8 next_string_id;
char *def_manufacturer;
@@ -381,8 +397,15 @@
extern int usb_string_id(struct usb_composite_dev *c);
extern int usb_string_ids_tab(struct usb_composite_dev *c,
struct usb_string *str);
+extern struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
+ struct usb_gadget_strings **sp, unsigned n_strings);
+
extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+extern void composite_disconnect(struct usb_gadget *gadget);
+extern int composite_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl);
+
/*
* Some systems will need runtime overrides for the product identifiers
* published in the device descriptor, either numbers or strings or both.
@@ -431,6 +454,54 @@
return bcdDevice;
}
+struct usb_function_driver {
+ const char *name;
+ struct module *mod;
+ struct list_head list;
+ struct usb_function_instance *(*alloc_inst)(void);
+ struct usb_function *(*alloc_func)(struct usb_function_instance *inst);
+};
+
+struct usb_function_instance {
+ struct usb_function_driver *fd;
+ void (*free_func_inst)(struct usb_function_instance *inst);
+};
+
+void usb_function_unregister(struct usb_function_driver *f);
+int usb_function_register(struct usb_function_driver *newf);
+void usb_put_function_instance(struct usb_function_instance *fi);
+void usb_put_function(struct usb_function *f);
+struct usb_function_instance *usb_get_function_instance(const char *name);
+struct usb_function *usb_get_function(struct usb_function_instance *fi);
+
+struct usb_configuration *usb_get_config(struct usb_composite_dev *cdev,
+ int val);
+int usb_add_config_only(struct usb_composite_dev *cdev,
+ struct usb_configuration *config);
+void usb_remove_function(struct usb_configuration *c, struct usb_function *f);
+
+#define DECLARE_USB_FUNCTION(_name, _inst_alloc, _func_alloc) \
+ static struct usb_function_driver _name ## usb_func = { \
+ .name = __stringify(_name), \
+ .mod = THIS_MODULE, \
+ .alloc_inst = _inst_alloc, \
+ .alloc_func = _func_alloc, \
+ }; \
+ MODULE_ALIAS("usbfunc:"__stringify(_name));
+
+#define DECLARE_USB_FUNCTION_INIT(_name, _inst_alloc, _func_alloc) \
+ DECLARE_USB_FUNCTION(_name, _inst_alloc, _func_alloc) \
+ static int __init _name ## mod_init(void) \
+ { \
+ return usb_function_register(&_name ## usb_func); \
+ } \
+ static void __exit _name ## mod_exit(void) \
+ { \
+ usb_function_unregister(&_name ## usb_func); \
+ } \
+ module_init(_name ## mod_init); \
+ module_exit(_name ## mod_exit)
+
/* messaging utils */
#define DBG(d, fmt, args...) \
dev_dbg(&(d)->gadget->dev , fmt , ## args)
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 0af6569..2e297e8 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -471,12 +471,6 @@
struct usb_gadget_driver *);
int (*udc_stop)(struct usb_gadget *,
struct usb_gadget_driver *);
-
- /* Those two are deprecated */
- int (*start)(struct usb_gadget_driver *,
- int (*bind)(struct usb_gadget *,
- struct usb_gadget_driver *driver));
- int (*stop)(struct usb_gadget_driver *);
};
/**
@@ -880,6 +874,8 @@
extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
extern void usb_del_gadget_udc(struct usb_gadget *gadget);
+extern int udc_attach_driver(const char *name,
+ struct usb_gadget_driver *driver);
/*-------------------------------------------------------------------------*/
@@ -911,6 +907,11 @@
struct usb_string *strings;
};
+struct usb_gadget_string_container {
+ struct list_head list;
+ u8 *stash[0];
+};
+
/* put descriptor for string with that id into buf (buflen >= 256) */
int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf);