| /* |
| * snd_sst_tokens.h - Intel SST tokens definition |
| * |
| * Copyright (C) 2016 Intel Corp |
| * Author: Shreyas NC <shreyas.nc@intel.com> |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| #ifndef __SND_SST_TOKENS_H__ |
| #define __SND_SST_TOKENS_H__ |
| |
| /** |
| * %SKL_TKN_UUID: Module UUID |
| * |
| * %SKL_TKN_U8_BLOCK_TYPE: Type of the private data block.Can be: |
| * tuples, bytes, short and words |
| * |
| * %SKL_TKN_U8_IN_PIN_TYPE: Input pin type, |
| * homogenous=0, heterogenous=1 |
| * |
| * %SKL_TKN_U8_OUT_PIN_TYPE: Output pin type, |
| * homogenous=0, heterogenous=1 |
| * %SKL_TKN_U8_DYN_IN_PIN: Configure Input pin dynamically |
| * if true |
| * |
| * %SKL_TKN_U8_DYN_OUT_PIN: Configure Output pin dynamically |
| * if true |
| * |
| * %SKL_TKN_U8_IN_QUEUE_COUNT: Store the number of Input pins |
| * |
| * %SKL_TKN_U8_OUT_QUEUE_COUNT: Store the number of Output pins |
| * |
| * %SKL_TKN_U8_TIME_SLOT: TDM slot number |
| * |
| * %SKL_TKN_U8_CORE_ID: Stores module affinity value.Can take |
| * the values: |
| * SKL_AFFINITY_CORE_0 = 0, |
| * SKL_AFFINITY_CORE_1, |
| * SKL_AFFINITY_CORE_MAX |
| * |
| * %SKL_TKN_U8_MOD_TYPE: Module type value. |
| * |
| * %SKL_TKN_U8_CONN_TYPE: Module connection type can be a FE, |
| * BE or NONE as defined : |
| * SKL_PIPE_CONN_TYPE_NONE = 0, |
| * SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA) |
| * SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA) |
| * |
| * %SKL_TKN_U8_DEV_TYPE: Type of device to which the module is |
| * connected |
| * Can take the values: |
| * SKL_DEVICE_BT = 0x0, |
| * SKL_DEVICE_DMIC = 0x1, |
| * SKL_DEVICE_I2S = 0x2, |
| * SKL_DEVICE_SLIMBUS = 0x3, |
| * SKL_DEVICE_HDALINK = 0x4, |
| * SKL_DEVICE_HDAHOST = 0x5, |
| * SKL_DEVICE_NONE |
| * |
| * %SKL_TKN_U8_HW_CONN_TYPE: Connection type of the HW to which the |
| * module is connected |
| * SKL_CONN_NONE = 0, |
| * SKL_CONN_SOURCE = 1, |
| * SKL_CONN_SINK = 2 |
| * |
| * %SKL_TKN_U16_PIN_INST_ID: Stores the pin instance id |
| * |
| * %SKL_TKN_U16_MOD_INST_ID: Stores the mdule instance id |
| * |
| * %SKL_TKN_U32_MAX_MCPS: Module max mcps value |
| * |
| * %SKL_TKN_U32_MEM_PAGES: Module resource pages |
| * |
| * %SKL_TKN_U32_OBS: Stores Output Buffer size |
| * |
| * %SKL_TKN_U32_IBS: Stores input buffer size |
| * |
| * %SKL_TKN_U32_VBUS_ID: Module VBUS_ID. PDM=0, SSP0=0, |
| * SSP1=1,SSP2=2, |
| * SSP3=3, SSP4=4, |
| * SSP5=5, SSP6=6,INVALID |
| * |
| * %SKL_TKN_U32_PARAMS_FIXUP: Module Params fixup mask |
| * %SKL_TKN_U32_CONVERTER: Module params converter mask |
| * %SKL_TKN_U32_PIPE_ID: Stores the pipe id |
| * |
| * %SKL_TKN_U32_PIPE_CONN_TYPE: Type of the token to which the pipe is |
| * connected to. It can be |
| * SKL_PIPE_CONN_TYPE_NONE = 0, |
| * SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA), |
| * SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA), |
| * |
| * %SKL_TKN_U32_PIPE_PRIORITY: Pipe priority value |
| * %SKL_TKN_U32_PIPE_MEM_PGS: Pipe resource pages |
| * |
| * %SKL_TKN_U32_DIR_PIN_COUNT: Value for the direction to set input/output |
| * formats and the pin count. |
| * The first 4 bits have the direction |
| * value and the next 4 have |
| * the pin count value. |
| * SKL_DIR_IN = 0, SKL_DIR_OUT = 1. |
| * The input and output formats |
| * share the same set of tokens |
| * with the distinction between input |
| * and output made by reading direction |
| * token. |
| * |
| * %SKL_TKN_U32_FMT_CH: Supported channel count |
| * |
| * %SKL_TKN_U32_FMT_FREQ: Supported frequency/sample rate |
| * |
| * %SKL_TKN_U32_FMT_BIT_DEPTH: Supported container size |
| * |
| * %SKL_TKN_U32_FMT_SAMPLE_SIZE:Number of samples in the container |
| * |
| * %SKL_TKN_U32_FMT_CH_CONFIG: Supported channel configurations for the |
| * input/output. |
| * |
| * %SKL_TKN_U32_FMT_INTERLEAVE: Interleaving style which can be per |
| * channel or per sample. The values can be : |
| * SKL_INTERLEAVING_PER_CHANNEL = 0, |
| * SKL_INTERLEAVING_PER_SAMPLE = 1, |
| * |
| * %SKL_TKN_U32_FMT_SAMPLE_TYPE: |
| * Specifies the sample type. Can take the |
| * values: SKL_SAMPLE_TYPE_INT_MSB = 0, |
| * SKL_SAMPLE_TYPE_INT_LSB = 1, |
| * SKL_SAMPLE_TYPE_INT_SIGNED = 2, |
| * SKL_SAMPLE_TYPE_INT_UNSIGNED = 3, |
| * SKL_SAMPLE_TYPE_FLOAT = 4 |
| * |
| * %SKL_TKN_U32_CH_MAP: Channel map values |
| * %SKL_TKN_U32_MOD_SET_PARAMS: It can take these values: |
| * SKL_PARAM_DEFAULT, SKL_PARAM_INIT, |
| * SKL_PARAM_SET, SKL_PARAM_BIND |
| * |
| * %SKL_TKN_U32_MOD_PARAM_ID: ID of the module params |
| * |
| * %SKL_TKN_U32_CAPS_SET_PARAMS: |
| * Set params value |
| * |
| * %SKL_TKN_U32_CAPS_PARAMS_ID: Params ID |
| * |
| * %SKL_TKN_U32_CAPS_SIZE: Caps size |
| * |
| * %SKL_TKN_U32_PROC_DOMAIN: Specify processing domain |
| * |
| * %SKL_TKN_U32_LIB_COUNT: Specifies the number of libraries |
| * |
| * %SKL_TKN_STR_LIB_NAME: Specifies the library name |
| * |
| * %SKL_TKN_U32_PMODE: Specifies the power mode for pipe |
| * |
| * %SKL_TKL_U32_D0I3_CAPS: Specifies the D0i3 capability for module |
| * |
| * module_id and loadable flags dont have tokens as these values will be |
| * read from the DSP FW manifest |
| */ |
| enum SKL_TKNS { |
| SKL_TKN_UUID = 1, |
| SKL_TKN_U8_NUM_BLOCKS, |
| SKL_TKN_U8_BLOCK_TYPE, |
| SKL_TKN_U8_IN_PIN_TYPE, |
| SKL_TKN_U8_OUT_PIN_TYPE, |
| SKL_TKN_U8_DYN_IN_PIN, |
| SKL_TKN_U8_DYN_OUT_PIN, |
| SKL_TKN_U8_IN_QUEUE_COUNT, |
| SKL_TKN_U8_OUT_QUEUE_COUNT, |
| SKL_TKN_U8_TIME_SLOT, |
| SKL_TKN_U8_CORE_ID, |
| SKL_TKN_U8_MOD_TYPE, |
| SKL_TKN_U8_CONN_TYPE, |
| SKL_TKN_U8_DEV_TYPE, |
| SKL_TKN_U8_HW_CONN_TYPE, |
| SKL_TKN_U16_MOD_INST_ID, |
| SKL_TKN_U16_BLOCK_SIZE, |
| SKL_TKN_U32_MAX_MCPS, |
| SKL_TKN_U32_MEM_PAGES, |
| SKL_TKN_U32_OBS, |
| SKL_TKN_U32_IBS, |
| SKL_TKN_U32_VBUS_ID, |
| SKL_TKN_U32_PARAMS_FIXUP, |
| SKL_TKN_U32_CONVERTER, |
| SKL_TKN_U32_PIPE_ID, |
| SKL_TKN_U32_PIPE_CONN_TYPE, |
| SKL_TKN_U32_PIPE_PRIORITY, |
| SKL_TKN_U32_PIPE_MEM_PGS, |
| SKL_TKN_U32_DIR_PIN_COUNT, |
| SKL_TKN_U32_FMT_CH, |
| SKL_TKN_U32_FMT_FREQ, |
| SKL_TKN_U32_FMT_BIT_DEPTH, |
| SKL_TKN_U32_FMT_SAMPLE_SIZE, |
| SKL_TKN_U32_FMT_CH_CONFIG, |
| SKL_TKN_U32_FMT_INTERLEAVE, |
| SKL_TKN_U32_FMT_SAMPLE_TYPE, |
| SKL_TKN_U32_FMT_CH_MAP, |
| SKL_TKN_U32_PIN_MOD_ID, |
| SKL_TKN_U32_PIN_INST_ID, |
| SKL_TKN_U32_MOD_SET_PARAMS, |
| SKL_TKN_U32_MOD_PARAM_ID, |
| SKL_TKN_U32_CAPS_SET_PARAMS, |
| SKL_TKN_U32_CAPS_PARAMS_ID, |
| SKL_TKN_U32_CAPS_SIZE, |
| SKL_TKN_U32_PROC_DOMAIN, |
| SKL_TKN_U32_LIB_COUNT, |
| SKL_TKN_STR_LIB_NAME, |
| SKL_TKN_U32_PMODE, |
| SKL_TKL_U32_D0I3_CAPS, |
| SKL_TKN_MAX = SKL_TKL_U32_D0I3_CAPS, |
| }; |
| |
| #endif |