arch/arm/mach-imx/mm-imx3.c - kernel/msm-4.19 - Gitiles

 /*
  *  Copyright (C) 1999,2000 Arm Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
  *    - add MX31 specific definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/pinctrl/machine.h>

 #include <asm/pgtable.h>
 #include <asm/system_misc.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>

 #include "common.h"
 #include "crmregs-imx3.h"
 #include "devices/devices-common.h"
 #include "hardware.h"
 #include "iomux-v3.h"

 void __iomem *mx3_ccm_base;

 static void imx3_idle(void)
 {
 	unsigned long reg = 0;

 	mx3_cpu_lp_set(MX3_WAIT);

 	__asm__ __volatile__(
 		/* disable I and D cache */
 		"mrc p15, 0, %0, c1, c0, 0\n"
 		"bic %0, %0, #0x00001000\n"
 		"bic %0, %0, #0x00000004\n"
 		"mcr p15, 0, %0, c1, c0, 0\n"
 		/* invalidate I cache */
 		"mov %0, #0\n"
 		"mcr p15, 0, %0, c7, c5, 0\n"
 		/* clear and invalidate D cache */
 		"mov %0, #0\n"
 		"mcr p15, 0, %0, c7, c14, 0\n"
 		/* WFI */
 		"mov %0, #0\n"
 		"mcr p15, 0, %0, c7, c0, 4\n"
 		"nop\n" "nop\n" "nop\n" "nop\n"
 		"nop\n" "nop\n" "nop\n"
 		/* enable I and D cache */
 		"mrc p15, 0, %0, c1, c0, 0\n"
 		"orr %0, %0, #0x00001000\n"
 		"orr %0, %0, #0x00000004\n"
 		"mcr p15, 0, %0, c1, c0, 0\n"
 		: "=r" (reg));
 }

 static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
 					 unsigned int mtype, void *caller)
 {
 	if (mtype == MT_DEVICE) {
 		/*
 		 * Access all peripherals below 0x80000000 as nonshared device
 		 * on mx3, but leave l2cc alone.  Otherwise cache corruptions
 		 * can occur.
 		 */
 		if (phys_addr < 0x80000000 &&
 				!addr_in_module(phys_addr, MX3x_L2CC))
 			mtype = MT_DEVICE_NONSHARED;
 	}

 	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
 }

 static void __init imx3_init_l2x0(void)
 {
 #ifdef CONFIG_CACHE_L2X0
 	void __iomem *l2x0_base;
 	void __iomem *clkctl_base;

 /*
  * First of all, we must repair broken chip settings. There are some
  * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
  * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
  * Workaraound is to setup the correct register setting prior enabling the
  * L2 cache. This should not hurt already working CPUs, as they are using the
  * same value.
  */
 #define L2_MEM_VAL 0x10

 	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
 	if (clkctl_base != NULL) {
 		writel(0x00000515, clkctl_base + L2_MEM_VAL);
 		iounmap(clkctl_base);
 	} else {
 		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
 	}

 	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
 	if (!l2x0_base) {
 		printk(KERN_ERR "remapping L2 cache area failed\n");
 		return;
 	}

 	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
 #endif
 }

 #ifdef CONFIG_SOC_IMX31
 static struct map_desc mx31_io_desc[] __initdata = {
 	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
 	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
 	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
 	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
 	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
 };

 /*
  * This function initializes the memory map. It is called during the
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
 void __init mx31_map_io(void)
 {
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }

 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 	arch_ioremap_caller = imx3_ioremap_caller;
 	arm_pm_idle = imx3_idle;
 	mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
 }

 void __init mx31_init_irq(void)
 {
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
 }

 static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
 	.per_2_per_addr = 1677,
 };

 static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
 	.ap_2_ap_addr = 423,
 	.ap_2_bp_addr = 829,
 	.bp_2_ap_addr = 1029,
 };

 static struct sdma_platform_data imx31_sdma_pdata __initdata = {
 	.fw_name = "sdma-imx31-to2.bin",
 	.script_addrs = &imx31_to2_sdma_script,
 };

 static const struct resource imx31_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
 };

 void __init imx31_soc_init(void)
 {
 	int to_version = mx31_revision() >> 4;

 	imx3_init_l2x0();

 	mxc_device_init();

 	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
 	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);

 	pinctrl_provide_dummies();

 	if (to_version == 1) {
 		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
 			strlen(imx31_sdma_pdata.fw_name));
 		imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
 	}

 	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);

 	imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
 	imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));

 	platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
 					ARRAY_SIZE(imx31_audmux_res));
 }
 #endif /* ifdef CONFIG_SOC_IMX31 */

 #ifdef CONFIG_SOC_IMX35
 static struct map_desc mx35_io_desc[] __initdata = {
 	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
 	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
 	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
 	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
 	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
 };

 void __init mx35_map_io(void)
 {
 	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 }

 void __init imx35_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
 	arm_pm_idle = imx3_idle;
 	arch_ioremap_caller = imx3_ioremap_caller;
 	mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
 }

 void __init mx35_init_irq(void)
 {
 	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
 }

 static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
 	.ap_2_ap_addr = 642,
 	.uart_2_mcu_addr = 817,
 	.mcu_2_app_addr = 747,
 	.uartsh_2_mcu_addr = 1183,
 	.per_2_shp_addr = 1033,
 	.mcu_2_shp_addr = 961,
 	.ata_2_mcu_addr = 1333,
 	.mcu_2_ata_addr = 1252,
 	.app_2_mcu_addr = 683,
 	.shp_2_per_addr = 1111,
 	.shp_2_mcu_addr = 892,
 };

 static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
 	.ap_2_ap_addr = 729,
 	.uart_2_mcu_addr = 904,
 	.per_2_app_addr = 1597,
 	.mcu_2_app_addr = 834,
 	.uartsh_2_mcu_addr = 1270,
 	.per_2_shp_addr = 1120,
 	.mcu_2_shp_addr = 1048,
 	.ata_2_mcu_addr = 1429,
 	.mcu_2_ata_addr = 1339,
 	.app_2_per_addr = 1531,
 	.app_2_mcu_addr = 770,
 	.shp_2_per_addr = 1198,
 	.shp_2_mcu_addr = 979,
 };

 static struct sdma_platform_data imx35_sdma_pdata __initdata = {
 	.fw_name = "sdma-imx35-to2.bin",
 	.script_addrs = &imx35_to2_sdma_script,
 };

 static const struct resource imx35_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
 };

 void __init imx35_soc_init(void)
 {
 	int to_version = mx35_revision() >> 4;

 	imx3_init_l2x0();

 	mxc_device_init();

 	mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
 	mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
 	mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);

 	pinctrl_provide_dummies();
 	if (to_version == 1) {
 		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
 			strlen(imx35_sdma_pdata.fw_name));
 		imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
 	}

 	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);

 	/* Setup AIPS registers */
 	imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR));
 	imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR));

 	/* i.mx35 has the i.mx31 type audmux */
 	platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
 					ARRAY_SIZE(imx35_audmux_res));
 }
 #endif /* ifdef CONFIG_SOC_IMX35 */
	/*
	* Copyright (C) 1999,2000 Arm Limited
	* Copyright (C) 2000 Deep Blue Solutions Ltd
	* Copyright (C) 2002 Shane Nay (shane@minirl.com)
	* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
	* - add MX31 specific definitions
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/mm.h>
	#include <linux/init.h>
	#include <linux/err.h>
	#include <linux/pinctrl/machine.h>

	#include <asm/pgtable.h>
	#include <asm/system_misc.h>
	#include <asm/hardware/cache-l2x0.h>
	#include <asm/mach/map.h>

	#include "common.h"
	#include "crmregs-imx3.h"
	#include "devices/devices-common.h"
	#include "hardware.h"
	#include "iomux-v3.h"

	void __iomem *mx3_ccm_base;

	static void imx3_idle(void)
	{
	unsigned long reg = 0;

	mx3_cpu_lp_set(MX3_WAIT);

	__asm__ __volatile__(
	/* disable I and D cache */
	"mrc p15, 0, %0, c1, c0, 0\n"
	"bic %0, %0, #0x00001000\n"
	"bic %0, %0, #0x00000004\n"
	"mcr p15, 0, %0, c1, c0, 0\n"
	/* invalidate I cache */
	"mov %0, #0\n"
	"mcr p15, 0, %0, c7, c5, 0\n"
	/* clear and invalidate D cache */
	"mov %0, #0\n"
	"mcr p15, 0, %0, c7, c14, 0\n"
	/* WFI */
	"mov %0, #0\n"
	"mcr p15, 0, %0, c7, c0, 4\n"
	"nop\n" "nop\n" "nop\n" "nop\n"
	"nop\n" "nop\n" "nop\n"
	/* enable I and D cache */
	"mrc p15, 0, %0, c1, c0, 0\n"
	"orr %0, %0, #0x00001000\n"
	"orr %0, %0, #0x00000004\n"
	"mcr p15, 0, %0, c1, c0, 0\n"
	: "=r" (reg));
	}

	static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
	unsigned int mtype, void *caller)
	{
	if (mtype == MT_DEVICE) {
	/*
	* Access all peripherals below 0x80000000 as nonshared device
	* on mx3, but leave l2cc alone. Otherwise cache corruptions
	* can occur.
	*/
	if (phys_addr < 0x80000000 &&
	!addr_in_module(phys_addr, MX3x_L2CC))
	mtype = MT_DEVICE_NONSHARED;
	}

	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
	}

	static void __init imx3_init_l2x0(void)
	{
	#ifdef CONFIG_CACHE_L2X0
	void __iomem *l2x0_base;
	void __iomem *clkctl_base;

	/*
	* First of all, we must repair broken chip settings. There are some
	* i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
	* misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
	* Workaraound is to setup the correct register setting prior enabling the
	* L2 cache. This should not hurt already working CPUs, as they are using the
	* same value.
	*/
	#define L2_MEM_VAL 0x10

	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
	if (clkctl_base != NULL) {
	writel(0x00000515, clkctl_base + L2_MEM_VAL);
	iounmap(clkctl_base);
	} else {
	pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
	}

	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
	if (!l2x0_base) {
	printk(KERN_ERR "remapping L2 cache area failed\n");
	return;
	}

	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
	#endif
	}

	#ifdef CONFIG_SOC_IMX31
	static struct map_desc mx31_io_desc[] __initdata = {
	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
	};

	/*
	* This function initializes the memory map. It is called during the
	* system startup to create static physical to virtual memory mappings
	* for the IO modules.
	*/
	void __init mx31_map_io(void)
	{
	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
	}

	void __init imx31_init_early(void)
	{
	mxc_set_cpu_type(MXC_CPU_MX31);
	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
	arch_ioremap_caller = imx3_ioremap_caller;
	arm_pm_idle = imx3_idle;
	mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
	}

	void __init mx31_init_irq(void)
	{
	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
	}

	static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
	.per_2_per_addr = 1677,
	};

	static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
	.ap_2_ap_addr = 423,
	.ap_2_bp_addr = 829,
	.bp_2_ap_addr = 1029,
	};

	static struct sdma_platform_data imx31_sdma_pdata __initdata = {
	.fw_name = "sdma-imx31-to2.bin",
	.script_addrs = &imx31_to2_sdma_script,
	};

	static const struct resource imx31_audmux_res[] __initconst = {
	DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
	};

	void __init imx31_soc_init(void)
	{
	int to_version = mx31_revision() >> 4;

	imx3_init_l2x0();

	mxc_device_init();

	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);

	pinctrl_provide_dummies();

	if (to_version == 1) {
	strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
	strlen(imx31_sdma_pdata.fw_name));
	imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
	}

	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);

	imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
	imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));

	platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
	ARRAY_SIZE(imx31_audmux_res));
	}
	#endif /* ifdef CONFIG_SOC_IMX31 */

	#ifdef CONFIG_SOC_IMX35
	static struct map_desc mx35_io_desc[] __initdata = {
	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
	};

	void __init mx35_map_io(void)
	{
	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
	}

	void __init imx35_init_early(void)
	{
	mxc_set_cpu_type(MXC_CPU_MX35);
	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
	arm_pm_idle = imx3_idle;
	arch_ioremap_caller = imx3_ioremap_caller;
	mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
	}

	void __init mx35_init_irq(void)
	{
	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
	}

	static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
	.ap_2_ap_addr = 642,
	.uart_2_mcu_addr = 817,
	.mcu_2_app_addr = 747,
	.uartsh_2_mcu_addr = 1183,
	.per_2_shp_addr = 1033,
	.mcu_2_shp_addr = 961,
	.ata_2_mcu_addr = 1333,
	.mcu_2_ata_addr = 1252,
	.app_2_mcu_addr = 683,
	.shp_2_per_addr = 1111,
	.shp_2_mcu_addr = 892,
	};

	static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
	.ap_2_ap_addr = 729,
	.uart_2_mcu_addr = 904,
	.per_2_app_addr = 1597,
	.mcu_2_app_addr = 834,
	.uartsh_2_mcu_addr = 1270,
	.per_2_shp_addr = 1120,
	.mcu_2_shp_addr = 1048,
	.ata_2_mcu_addr = 1429,
	.mcu_2_ata_addr = 1339,
	.app_2_per_addr = 1531,
	.app_2_mcu_addr = 770,
	.shp_2_per_addr = 1198,
	.shp_2_mcu_addr = 979,
	};

	static struct sdma_platform_data imx35_sdma_pdata __initdata = {
	.fw_name = "sdma-imx35-to2.bin",
	.script_addrs = &imx35_to2_sdma_script,
	};

	static const struct resource imx35_audmux_res[] __initconst = {
	DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
	};

	void __init imx35_soc_init(void)
	{
	int to_version = mx35_revision() >> 4;

	imx3_init_l2x0();

	mxc_device_init();

	mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
	mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
	mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);

	pinctrl_provide_dummies();
	if (to_version == 1) {
	strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
	strlen(imx35_sdma_pdata.fw_name));
	imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
	}

	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);

	/* Setup AIPS registers */
	imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR));
	imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR));

	/* i.mx35 has the i.mx31 type audmux */
	platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
	ARRAY_SIZE(imx35_audmux_res));
	}
	#endif /* ifdef CONFIG_SOC_IMX35 */