| /* |
| * Copyright (C) 2009 - QLogic Corporation. |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, |
| * MA 02111-1307, USA. |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called "COPYING". |
| * |
| */ |
| |
| #ifndef _QLCNIC_H_ |
| #define _QLCNIC_H_ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ip.h> |
| #include <linux/in.h> |
| #include <linux/tcp.h> |
| #include <linux/skbuff.h> |
| #include <linux/firmware.h> |
| |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/timer.h> |
| |
| #include <linux/vmalloc.h> |
| |
| #include <linux/io.h> |
| #include <asm/byteorder.h> |
| |
| #include "qlcnic_hdr.h" |
| |
| #define _QLCNIC_LINUX_MAJOR 5 |
| #define _QLCNIC_LINUX_MINOR 0 |
| #define _QLCNIC_LINUX_SUBVERSION 0 |
| #define QLCNIC_LINUX_VERSIONID "5.0.0" |
| |
| #define QLCNIC_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c)) |
| #define _major(v) (((v) >> 24) & 0xff) |
| #define _minor(v) (((v) >> 16) & 0xff) |
| #define _build(v) ((v) & 0xffff) |
| |
| /* version in image has weird encoding: |
| * 7:0 - major |
| * 15:8 - minor |
| * 31:16 - build (little endian) |
| */ |
| #define QLCNIC_DECODE_VERSION(v) \ |
| QLCNIC_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16)) |
| |
| #define QLCNIC_NUM_FLASH_SECTORS (64) |
| #define QLCNIC_FLASH_SECTOR_SIZE (64 * 1024) |
| #define QLCNIC_FLASH_TOTAL_SIZE (QLCNIC_NUM_FLASH_SECTORS \ |
| * QLCNIC_FLASH_SECTOR_SIZE) |
| |
| #define RCV_DESC_RINGSIZE(rds_ring) \ |
| (sizeof(struct rcv_desc) * (rds_ring)->num_desc) |
| #define RCV_BUFF_RINGSIZE(rds_ring) \ |
| (sizeof(struct qlcnic_rx_buffer) * rds_ring->num_desc) |
| #define STATUS_DESC_RINGSIZE(sds_ring) \ |
| (sizeof(struct status_desc) * (sds_ring)->num_desc) |
| #define TX_BUFF_RINGSIZE(tx_ring) \ |
| (sizeof(struct qlcnic_cmd_buffer) * tx_ring->num_desc) |
| #define TX_DESC_RINGSIZE(tx_ring) \ |
| (sizeof(struct cmd_desc_type0) * tx_ring->num_desc) |
| |
| #define QLCNIC_P3P_A0 0x50 |
| |
| #define QLCNIC_IS_REVISION_P3P(REVISION) (REVISION >= QLCNIC_P3P_A0) |
| |
| #define FIRST_PAGE_GROUP_START 0 |
| #define FIRST_PAGE_GROUP_END 0x100000 |
| |
| #define P3_MAX_MTU (9600) |
| #define QLCNIC_MAX_ETHERHDR 32 /* This contains some padding */ |
| |
| #define QLCNIC_P3_RX_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + ETH_DATA_LEN) |
| #define QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + P3_MAX_MTU) |
| #define QLCNIC_CT_DEFAULT_RX_BUF_LEN 2048 |
| #define QLCNIC_LRO_BUFFER_EXTRA 2048 |
| |
| #define QLCNIC_RX_LRO_BUFFER_LENGTH (8060) |
| |
| /* Opcodes to be used with the commands */ |
| #define TX_ETHER_PKT 0x01 |
| #define TX_TCP_PKT 0x02 |
| #define TX_UDP_PKT 0x03 |
| #define TX_IP_PKT 0x04 |
| #define TX_TCP_LSO 0x05 |
| #define TX_TCP_LSO6 0x06 |
| #define TX_IPSEC 0x07 |
| #define TX_IPSEC_CMD 0x0a |
| #define TX_TCPV6_PKT 0x0b |
| #define TX_UDPV6_PKT 0x0c |
| |
| /* Tx defines */ |
| #define MAX_BUFFERS_PER_CMD 32 |
| #define TX_STOP_THRESH ((MAX_SKB_FRAGS >> 2) + 4) |
| #define QLCNIC_MAX_TX_TIMEOUTS 2 |
| |
| /* |
| * Following are the states of the Phantom. Phantom will set them and |
| * Host will read to check if the fields are correct. |
| */ |
| #define PHAN_INITIALIZE_FAILED 0xffff |
| #define PHAN_INITIALIZE_COMPLETE 0xff01 |
| |
| /* Host writes the following to notify that it has done the init-handshake */ |
| #define PHAN_INITIALIZE_ACK 0xf00f |
| #define PHAN_PEG_RCV_INITIALIZED 0xff01 |
| |
| #define NUM_RCV_DESC_RINGS 3 |
| #define NUM_STS_DESC_RINGS 4 |
| |
| #define RCV_RING_NORMAL 0 |
| #define RCV_RING_JUMBO 1 |
| #define RCV_RING_LRO 2 |
| |
| #define MIN_CMD_DESCRIPTORS 64 |
| #define MIN_RCV_DESCRIPTORS 64 |
| #define MIN_JUMBO_DESCRIPTORS 32 |
| |
| #define MAX_CMD_DESCRIPTORS 1024 |
| #define MAX_RCV_DESCRIPTORS_1G 4096 |
| #define MAX_RCV_DESCRIPTORS_10G 8192 |
| #define MAX_JUMBO_RCV_DESCRIPTORS_1G 512 |
| #define MAX_JUMBO_RCV_DESCRIPTORS_10G 1024 |
| #define MAX_LRO_RCV_DESCRIPTORS 8 |
| |
| #define DEFAULT_RCV_DESCRIPTORS_1G 2048 |
| #define DEFAULT_RCV_DESCRIPTORS_10G 4096 |
| |
| #define get_next_index(index, length) \ |
| (((index) + 1) & ((length) - 1)) |
| |
| #define MPORT_MULTI_FUNCTION_MODE 0x2222 |
| |
| /* |
| * Following data structures describe the descriptors that will be used. |
| * Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when |
| * we are doing LSO (above the 1500 size packet) only. |
| */ |
| |
| #define FLAGS_VLAN_TAGGED 0x10 |
| #define FLAGS_VLAN_OOB 0x40 |
| |
| #define qlcnic_set_tx_vlan_tci(cmd_desc, v) \ |
| (cmd_desc)->vlan_TCI = cpu_to_le16(v); |
| #define qlcnic_set_cmd_desc_port(cmd_desc, var) \ |
| ((cmd_desc)->port_ctxid |= ((var) & 0x0F)) |
| #define qlcnic_set_cmd_desc_ctxid(cmd_desc, var) \ |
| ((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0)) |
| |
| #define qlcnic_set_tx_port(_desc, _port) \ |
| ((_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0)) |
| |
| #define qlcnic_set_tx_flags_opcode(_desc, _flags, _opcode) \ |
| ((_desc)->flags_opcode = \ |
| cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7))) |
| |
| #define qlcnic_set_tx_frags_len(_desc, _frags, _len) \ |
| ((_desc)->nfrags__length = \ |
| cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8))) |
| |
| struct cmd_desc_type0 { |
| u8 tcp_hdr_offset; /* For LSO only */ |
| u8 ip_hdr_offset; /* For LSO only */ |
| __le16 flags_opcode; /* 15:13 unused, 12:7 opcode, 6:0 flags */ |
| __le32 nfrags__length; /* 31:8 total len, 7:0 frag count */ |
| |
| __le64 addr_buffer2; |
| |
| __le16 reference_handle; |
| __le16 mss; |
| u8 port_ctxid; /* 7:4 ctxid 3:0 port */ |
| u8 total_hdr_length; /* LSO only : MAC+IP+TCP Hdr size */ |
| __le16 conn_id; /* IPSec offoad only */ |
| |
| __le64 addr_buffer3; |
| __le64 addr_buffer1; |
| |
| __le16 buffer_length[4]; |
| |
| __le64 addr_buffer4; |
| |
| __le32 reserved2; |
| __le16 reserved; |
| __le16 vlan_TCI; |
| |
| } __attribute__ ((aligned(64))); |
| |
| /* Note: sizeof(rcv_desc) should always be a mutliple of 2 */ |
| struct rcv_desc { |
| __le16 reference_handle; |
| __le16 reserved; |
| __le32 buffer_length; /* allocated buffer length (usually 2K) */ |
| __le64 addr_buffer; |
| }; |
| |
| /* opcode field in status_desc */ |
| #define QLCNIC_SYN_OFFLOAD 0x03 |
| #define QLCNIC_RXPKT_DESC 0x04 |
| #define QLCNIC_OLD_RXPKT_DESC 0x3f |
| #define QLCNIC_RESPONSE_DESC 0x05 |
| #define QLCNIC_LRO_DESC 0x12 |
| |
| /* for status field in status_desc */ |
| #define STATUS_CKSUM_OK (2) |
| |
| /* owner bits of status_desc */ |
| #define STATUS_OWNER_HOST (0x1ULL << 56) |
| #define STATUS_OWNER_PHANTOM (0x2ULL << 56) |
| |
| /* Status descriptor: |
| 0-3 port, 4-7 status, 8-11 type, 12-27 total_length |
| 28-43 reference_handle, 44-47 protocol, 48-52 pkt_offset |
| 53-55 desc_cnt, 56-57 owner, 58-63 opcode |
| */ |
| #define qlcnic_get_sts_port(sts_data) \ |
| ((sts_data) & 0x0F) |
| #define qlcnic_get_sts_status(sts_data) \ |
| (((sts_data) >> 4) & 0x0F) |
| #define qlcnic_get_sts_type(sts_data) \ |
| (((sts_data) >> 8) & 0x0F) |
| #define qlcnic_get_sts_totallength(sts_data) \ |
| (((sts_data) >> 12) & 0xFFFF) |
| #define qlcnic_get_sts_refhandle(sts_data) \ |
| (((sts_data) >> 28) & 0xFFFF) |
| #define qlcnic_get_sts_prot(sts_data) \ |
| (((sts_data) >> 44) & 0x0F) |
| #define qlcnic_get_sts_pkt_offset(sts_data) \ |
| (((sts_data) >> 48) & 0x1F) |
| #define qlcnic_get_sts_desc_cnt(sts_data) \ |
| (((sts_data) >> 53) & 0x7) |
| #define qlcnic_get_sts_opcode(sts_data) \ |
| (((sts_data) >> 58) & 0x03F) |
| |
| #define qlcnic_get_lro_sts_refhandle(sts_data) \ |
| ((sts_data) & 0x0FFFF) |
| #define qlcnic_get_lro_sts_length(sts_data) \ |
| (((sts_data) >> 16) & 0x0FFFF) |
| #define qlcnic_get_lro_sts_l2_hdr_offset(sts_data) \ |
| (((sts_data) >> 32) & 0x0FF) |
| #define qlcnic_get_lro_sts_l4_hdr_offset(sts_data) \ |
| (((sts_data) >> 40) & 0x0FF) |
| #define qlcnic_get_lro_sts_timestamp(sts_data) \ |
| (((sts_data) >> 48) & 0x1) |
| #define qlcnic_get_lro_sts_type(sts_data) \ |
| (((sts_data) >> 49) & 0x7) |
| #define qlcnic_get_lro_sts_push_flag(sts_data) \ |
| (((sts_data) >> 52) & 0x1) |
| #define qlcnic_get_lro_sts_seq_number(sts_data) \ |
| ((sts_data) & 0x0FFFFFFFF) |
| |
| |
| struct status_desc { |
| __le64 status_desc_data[2]; |
| } __attribute__ ((aligned(16))); |
| |
| /* UNIFIED ROMIMAGE */ |
| #define QLCNIC_UNI_FW_MIN_SIZE 0xc8000 |
| #define QLCNIC_UNI_DIR_SECT_PRODUCT_TBL 0x0 |
| #define QLCNIC_UNI_DIR_SECT_BOOTLD 0x6 |
| #define QLCNIC_UNI_DIR_SECT_FW 0x7 |
| |
| /*Offsets */ |
| #define QLCNIC_UNI_CHIP_REV_OFF 10 |
| #define QLCNIC_UNI_FLAGS_OFF 11 |
| #define QLCNIC_UNI_BIOS_VERSION_OFF 12 |
| #define QLCNIC_UNI_BOOTLD_IDX_OFF 27 |
| #define QLCNIC_UNI_FIRMWARE_IDX_OFF 29 |
| |
| struct uni_table_desc{ |
| u32 findex; |
| u32 num_entries; |
| u32 entry_size; |
| u32 reserved[5]; |
| }; |
| |
| struct uni_data_desc{ |
| u32 findex; |
| u32 size; |
| u32 reserved[5]; |
| }; |
| |
| /* Magic number to let user know flash is programmed */ |
| #define QLCNIC_BDINFO_MAGIC 0x12345678 |
| |
| #define QLCNIC_BRDTYPE_P3_REF_QG 0x0021 |
| #define QLCNIC_BRDTYPE_P3_HMEZ 0x0022 |
| #define QLCNIC_BRDTYPE_P3_10G_CX4_LP 0x0023 |
| #define QLCNIC_BRDTYPE_P3_4_GB 0x0024 |
| #define QLCNIC_BRDTYPE_P3_IMEZ 0x0025 |
| #define QLCNIC_BRDTYPE_P3_10G_SFP_PLUS 0x0026 |
| #define QLCNIC_BRDTYPE_P3_10000_BASE_T 0x0027 |
| #define QLCNIC_BRDTYPE_P3_XG_LOM 0x0028 |
| #define QLCNIC_BRDTYPE_P3_4_GB_MM 0x0029 |
| #define QLCNIC_BRDTYPE_P3_10G_SFP_CT 0x002a |
| #define QLCNIC_BRDTYPE_P3_10G_SFP_QT 0x002b |
| #define QLCNIC_BRDTYPE_P3_10G_CX4 0x0031 |
| #define QLCNIC_BRDTYPE_P3_10G_XFP 0x0032 |
| #define QLCNIC_BRDTYPE_P3_10G_TP 0x0080 |
| |
| /* Flash memory map */ |
| #define QLCNIC_BRDCFG_START 0x4000 /* board config */ |
| #define QLCNIC_BOOTLD_START 0x10000 /* bootld */ |
| #define QLCNIC_IMAGE_START 0x43000 /* compressed image */ |
| #define QLCNIC_USER_START 0x3E8000 /* Firmare info */ |
| |
| #define QLCNIC_FW_VERSION_OFFSET (QLCNIC_USER_START+0x408) |
| #define QLCNIC_FW_SIZE_OFFSET (QLCNIC_USER_START+0x40c) |
| #define QLCNIC_FW_SERIAL_NUM_OFFSET (QLCNIC_USER_START+0x81c) |
| #define QLCNIC_BIOS_VERSION_OFFSET (QLCNIC_USER_START+0x83c) |
| |
| #define QLCNIC_BRDTYPE_OFFSET (QLCNIC_BRDCFG_START+0x8) |
| #define QLCNIC_FW_MAGIC_OFFSET (QLCNIC_BRDCFG_START+0x128) |
| |
| #define QLCNIC_FW_MIN_SIZE (0x3fffff) |
| #define QLCNIC_UNIFIED_ROMIMAGE 0 |
| #define QLCNIC_FLASH_ROMIMAGE 1 |
| #define QLCNIC_UNKNOWN_ROMIMAGE 0xff |
| |
| #define QLCNIC_UNIFIED_ROMIMAGE_NAME "phanfw.bin" |
| #define QLCNIC_FLASH_ROMIMAGE_NAME "flash" |
| |
| extern char qlcnic_driver_name[]; |
| |
| /* Number of status descriptors to handle per interrupt */ |
| #define MAX_STATUS_HANDLE (64) |
| |
| /* |
| * qlcnic_skb_frag{} is to contain mapping info for each SG list. This |
| * has to be freed when DMA is complete. This is part of qlcnic_tx_buffer{}. |
| */ |
| struct qlcnic_skb_frag { |
| u64 dma; |
| u64 length; |
| }; |
| |
| struct qlcnic_recv_crb { |
| u32 crb_rcv_producer[NUM_RCV_DESC_RINGS]; |
| u32 crb_sts_consumer[NUM_STS_DESC_RINGS]; |
| u32 sw_int_mask[NUM_STS_DESC_RINGS]; |
| }; |
| |
| /* Following defines are for the state of the buffers */ |
| #define QLCNIC_BUFFER_FREE 0 |
| #define QLCNIC_BUFFER_BUSY 1 |
| |
| /* |
| * There will be one qlcnic_buffer per skb packet. These will be |
| * used to save the dma info for pci_unmap_page() |
| */ |
| struct qlcnic_cmd_buffer { |
| struct sk_buff *skb; |
| struct qlcnic_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1]; |
| u32 frag_count; |
| }; |
| |
| /* In rx_buffer, we do not need multiple fragments as is a single buffer */ |
| struct qlcnic_rx_buffer { |
| struct list_head list; |
| struct sk_buff *skb; |
| u64 dma; |
| u16 ref_handle; |
| u16 state; |
| }; |
| |
| /* Board types */ |
| #define QLCNIC_GBE 0x01 |
| #define QLCNIC_XGBE 0x02 |
| |
| /* |
| * One hardware_context{} per adapter |
| * contains interrupt info as well shared hardware info. |
| */ |
| struct qlcnic_hardware_context { |
| void __iomem *pci_base0; |
| void __iomem *ocm_win_crb; |
| |
| unsigned long pci_len0; |
| |
| u32 ocm_win; |
| u32 crb_win; |
| |
| rwlock_t crb_lock; |
| struct mutex mem_lock; |
| |
| u8 cut_through; |
| u8 revision_id; |
| u8 pci_func; |
| u8 linkup; |
| u16 port_type; |
| u16 board_type; |
| }; |
| |
| struct qlcnic_adapter_stats { |
| u64 xmitcalled; |
| u64 xmitfinished; |
| u64 rxdropped; |
| u64 txdropped; |
| u64 csummed; |
| u64 rx_pkts; |
| u64 lro_pkts; |
| u64 rxbytes; |
| u64 txbytes; |
| }; |
| |
| /* |
| * Rcv Descriptor Context. One such per Rcv Descriptor. There may |
| * be one Rcv Descriptor for normal packets, one for jumbo and may be others. |
| */ |
| struct qlcnic_host_rds_ring { |
| u32 producer; |
| u32 num_desc; |
| u32 dma_size; |
| u32 skb_size; |
| u32 flags; |
| void __iomem *crb_rcv_producer; |
| struct rcv_desc *desc_head; |
| struct qlcnic_rx_buffer *rx_buf_arr; |
| struct list_head free_list; |
| spinlock_t lock; |
| dma_addr_t phys_addr; |
| }; |
| |
| struct qlcnic_host_sds_ring { |
| u32 consumer; |
| u32 num_desc; |
| void __iomem *crb_sts_consumer; |
| void __iomem *crb_intr_mask; |
| |
| struct status_desc *desc_head; |
| struct qlcnic_adapter *adapter; |
| struct napi_struct napi; |
| struct list_head free_list[NUM_RCV_DESC_RINGS]; |
| |
| int irq; |
| |
| dma_addr_t phys_addr; |
| char name[IFNAMSIZ+4]; |
| }; |
| |
| struct qlcnic_host_tx_ring { |
| u32 producer; |
| __le32 *hw_consumer; |
| u32 sw_consumer; |
| void __iomem *crb_cmd_producer; |
| u32 num_desc; |
| |
| struct netdev_queue *txq; |
| |
| struct qlcnic_cmd_buffer *cmd_buf_arr; |
| struct cmd_desc_type0 *desc_head; |
| dma_addr_t phys_addr; |
| dma_addr_t hw_cons_phys_addr; |
| }; |
| |
| /* |
| * Receive context. There is one such structure per instance of the |
| * receive processing. Any state information that is relevant to |
| * the receive, and is must be in this structure. The global data may be |
| * present elsewhere. |
| */ |
| struct qlcnic_recv_context { |
| u32 state; |
| u16 context_id; |
| u16 virt_port; |
| |
| struct qlcnic_host_rds_ring *rds_rings; |
| struct qlcnic_host_sds_ring *sds_rings; |
| }; |
| |
| /* HW context creation */ |
| |
| #define QLCNIC_OS_CRB_RETRY_COUNT 4000 |
| #define QLCNIC_CDRP_SIGNATURE_MAKE(pcifn, version) \ |
| (((pcifn) & 0xff) | (((version) & 0xff) << 8) | (0xcafe << 16)) |
| |
| #define QLCNIC_CDRP_CMD_BIT 0x80000000 |
| |
| /* |
| * All responses must have the QLCNIC_CDRP_CMD_BIT cleared |
| * in the crb QLCNIC_CDRP_CRB_OFFSET. |
| */ |
| #define QLCNIC_CDRP_FORM_RSP(rsp) (rsp) |
| #define QLCNIC_CDRP_IS_RSP(rsp) (((rsp) & QLCNIC_CDRP_CMD_BIT) == 0) |
| |
| #define QLCNIC_CDRP_RSP_OK 0x00000001 |
| #define QLCNIC_CDRP_RSP_FAIL 0x00000002 |
| #define QLCNIC_CDRP_RSP_TIMEOUT 0x00000003 |
| |
| /* |
| * All commands must have the QLCNIC_CDRP_CMD_BIT set in |
| * the crb QLCNIC_CDRP_CRB_OFFSET. |
| */ |
| #define QLCNIC_CDRP_FORM_CMD(cmd) (QLCNIC_CDRP_CMD_BIT | (cmd)) |
| #define QLCNIC_CDRP_IS_CMD(cmd) (((cmd) & QLCNIC_CDRP_CMD_BIT) != 0) |
| |
| #define QLCNIC_CDRP_CMD_SUBMIT_CAPABILITIES 0x00000001 |
| #define QLCNIC_CDRP_CMD_READ_MAX_RDS_PER_CTX 0x00000002 |
| #define QLCNIC_CDRP_CMD_READ_MAX_SDS_PER_CTX 0x00000003 |
| #define QLCNIC_CDRP_CMD_READ_MAX_RULES_PER_CTX 0x00000004 |
| #define QLCNIC_CDRP_CMD_READ_MAX_RX_CTX 0x00000005 |
| #define QLCNIC_CDRP_CMD_READ_MAX_TX_CTX 0x00000006 |
| #define QLCNIC_CDRP_CMD_CREATE_RX_CTX 0x00000007 |
| #define QLCNIC_CDRP_CMD_DESTROY_RX_CTX 0x00000008 |
| #define QLCNIC_CDRP_CMD_CREATE_TX_CTX 0x00000009 |
| #define QLCNIC_CDRP_CMD_DESTROY_TX_CTX 0x0000000a |
| #define QLCNIC_CDRP_CMD_SETUP_STATISTICS 0x0000000e |
| #define QLCNIC_CDRP_CMD_GET_STATISTICS 0x0000000f |
| #define QLCNIC_CDRP_CMD_DELETE_STATISTICS 0x00000010 |
| #define QLCNIC_CDRP_CMD_SET_MTU 0x00000012 |
| #define QLCNIC_CDRP_CMD_READ_PHY 0x00000013 |
| #define QLCNIC_CDRP_CMD_WRITE_PHY 0x00000014 |
| #define QLCNIC_CDRP_CMD_READ_HW_REG 0x00000015 |
| #define QLCNIC_CDRP_CMD_GET_FLOW_CTL 0x00000016 |
| #define QLCNIC_CDRP_CMD_SET_FLOW_CTL 0x00000017 |
| #define QLCNIC_CDRP_CMD_READ_MAX_MTU 0x00000018 |
| #define QLCNIC_CDRP_CMD_READ_MAX_LRO 0x00000019 |
| #define QLCNIC_CDRP_CMD_CONFIGURE_TOE 0x0000001a |
| #define QLCNIC_CDRP_CMD_FUNC_ATTRIB 0x0000001b |
| #define QLCNIC_CDRP_CMD_READ_PEXQ_PARAMETERS 0x0000001c |
| #define QLCNIC_CDRP_CMD_GET_LIC_CAPABILITIES 0x0000001d |
| #define QLCNIC_CDRP_CMD_READ_MAX_LRO_PER_BOARD 0x0000001e |
| #define QLCNIC_CDRP_CMD_MAX 0x0000001f |
| |
| #define QLCNIC_RCODE_SUCCESS 0 |
| #define QLCNIC_RCODE_TIMEOUT 17 |
| #define QLCNIC_DESTROY_CTX_RESET 0 |
| |
| /* |
| * Capabilities Announced |
| */ |
| #define QLCNIC_CAP0_LEGACY_CONTEXT (1) |
| #define QLCNIC_CAP0_LEGACY_MN (1 << 2) |
| #define QLCNIC_CAP0_LSO (1 << 6) |
| #define QLCNIC_CAP0_JUMBO_CONTIGUOUS (1 << 7) |
| #define QLCNIC_CAP0_LRO_CONTIGUOUS (1 << 8) |
| |
| /* |
| * Context state |
| */ |
| #define QLCHAL_VERSION 1 |
| |
| #define QLCNIC_HOST_CTX_STATE_ACTIVE 2 |
| |
| /* |
| * Rx context |
| */ |
| |
| struct qlcnic_hostrq_sds_ring { |
| __le64 host_phys_addr; /* Ring base addr */ |
| __le32 ring_size; /* Ring entries */ |
| __le16 msi_index; |
| __le16 rsvd; /* Padding */ |
| }; |
| |
| struct qlcnic_hostrq_rds_ring { |
| __le64 host_phys_addr; /* Ring base addr */ |
| __le64 buff_size; /* Packet buffer size */ |
| __le32 ring_size; /* Ring entries */ |
| __le32 ring_kind; /* Class of ring */ |
| }; |
| |
| struct qlcnic_hostrq_rx_ctx { |
| __le64 host_rsp_dma_addr; /* Response dma'd here */ |
| __le32 capabilities[4]; /* Flag bit vector */ |
| __le32 host_int_crb_mode; /* Interrupt crb usage */ |
| __le32 host_rds_crb_mode; /* RDS crb usage */ |
| /* These ring offsets are relative to data[0] below */ |
| __le32 rds_ring_offset; /* Offset to RDS config */ |
| __le32 sds_ring_offset; /* Offset to SDS config */ |
| __le16 num_rds_rings; /* Count of RDS rings */ |
| __le16 num_sds_rings; /* Count of SDS rings */ |
| __le16 rsvd1; /* Padding */ |
| __le16 rsvd2; /* Padding */ |
| u8 reserved[128]; /* reserve space for future expansion*/ |
| /* MUST BE 64-bit aligned. |
| The following is packed: |
| - N hostrq_rds_rings |
| - N hostrq_sds_rings */ |
| char data[0]; |
| }; |
| |
| struct qlcnic_cardrsp_rds_ring{ |
| __le32 host_producer_crb; /* Crb to use */ |
| __le32 rsvd1; /* Padding */ |
| }; |
| |
| struct qlcnic_cardrsp_sds_ring { |
| __le32 host_consumer_crb; /* Crb to use */ |
| __le32 interrupt_crb; /* Crb to use */ |
| }; |
| |
| struct qlcnic_cardrsp_rx_ctx { |
| /* These ring offsets are relative to data[0] below */ |
| __le32 rds_ring_offset; /* Offset to RDS config */ |
| __le32 sds_ring_offset; /* Offset to SDS config */ |
| __le32 host_ctx_state; /* Starting State */ |
| __le32 num_fn_per_port; /* How many PCI fn share the port */ |
| __le16 num_rds_rings; /* Count of RDS rings */ |
| __le16 num_sds_rings; /* Count of SDS rings */ |
| __le16 context_id; /* Handle for context */ |
| u8 phys_port; /* Physical id of port */ |
| u8 virt_port; /* Virtual/Logical id of port */ |
| u8 reserved[128]; /* save space for future expansion */ |
| /* MUST BE 64-bit aligned. |
| The following is packed: |
| - N cardrsp_rds_rings |
| - N cardrs_sds_rings */ |
| char data[0]; |
| }; |
| |
| #define SIZEOF_HOSTRQ_RX(HOSTRQ_RX, rds_rings, sds_rings) \ |
| (sizeof(HOSTRQ_RX) + \ |
| (rds_rings)*(sizeof(struct qlcnic_hostrq_rds_ring)) + \ |
| (sds_rings)*(sizeof(struct qlcnic_hostrq_sds_ring))) |
| |
| #define SIZEOF_CARDRSP_RX(CARDRSP_RX, rds_rings, sds_rings) \ |
| (sizeof(CARDRSP_RX) + \ |
| (rds_rings)*(sizeof(struct qlcnic_cardrsp_rds_ring)) + \ |
| (sds_rings)*(sizeof(struct qlcnic_cardrsp_sds_ring))) |
| |
| /* |
| * Tx context |
| */ |
| |
| struct qlcnic_hostrq_cds_ring { |
| __le64 host_phys_addr; /* Ring base addr */ |
| __le32 ring_size; /* Ring entries */ |
| __le32 rsvd; /* Padding */ |
| }; |
| |
| struct qlcnic_hostrq_tx_ctx { |
| __le64 host_rsp_dma_addr; /* Response dma'd here */ |
| __le64 cmd_cons_dma_addr; /* */ |
| __le64 dummy_dma_addr; /* */ |
| __le32 capabilities[4]; /* Flag bit vector */ |
| __le32 host_int_crb_mode; /* Interrupt crb usage */ |
| __le32 rsvd1; /* Padding */ |
| __le16 rsvd2; /* Padding */ |
| __le16 interrupt_ctl; |
| __le16 msi_index; |
| __le16 rsvd3; /* Padding */ |
| struct qlcnic_hostrq_cds_ring cds_ring; /* Desc of cds ring */ |
| u8 reserved[128]; /* future expansion */ |
| }; |
| |
| struct qlcnic_cardrsp_cds_ring { |
| __le32 host_producer_crb; /* Crb to use */ |
| __le32 interrupt_crb; /* Crb to use */ |
| }; |
| |
| struct qlcnic_cardrsp_tx_ctx { |
| __le32 host_ctx_state; /* Starting state */ |
| __le16 context_id; /* Handle for context */ |
| u8 phys_port; /* Physical id of port */ |
| u8 virt_port; /* Virtual/Logical id of port */ |
| struct qlcnic_cardrsp_cds_ring cds_ring; /* Card cds settings */ |
| u8 reserved[128]; /* future expansion */ |
| }; |
| |
| #define SIZEOF_HOSTRQ_TX(HOSTRQ_TX) (sizeof(HOSTRQ_TX)) |
| #define SIZEOF_CARDRSP_TX(CARDRSP_TX) (sizeof(CARDRSP_TX)) |
| |
| /* CRB */ |
| |
| #define QLCNIC_HOST_RDS_CRB_MODE_UNIQUE 0 |
| #define QLCNIC_HOST_RDS_CRB_MODE_SHARED 1 |
| #define QLCNIC_HOST_RDS_CRB_MODE_CUSTOM 2 |
| #define QLCNIC_HOST_RDS_CRB_MODE_MAX 3 |
| |
| #define QLCNIC_HOST_INT_CRB_MODE_UNIQUE 0 |
| #define QLCNIC_HOST_INT_CRB_MODE_SHARED 1 |
| #define QLCNIC_HOST_INT_CRB_MODE_NORX 2 |
| #define QLCNIC_HOST_INT_CRB_MODE_NOTX 3 |
| #define QLCNIC_HOST_INT_CRB_MODE_NORXTX 4 |
| |
| |
| /* MAC */ |
| |
| #define MC_COUNT_P3 38 |
| |
| #define QLCNIC_MAC_NOOP 0 |
| #define QLCNIC_MAC_ADD 1 |
| #define QLCNIC_MAC_DEL 2 |
| |
| struct qlcnic_mac_list_s { |
| struct list_head list; |
| uint8_t mac_addr[ETH_ALEN+2]; |
| }; |
| |
| /* |
| * Interrupt coalescing defaults. The defaults are for 1500 MTU. It is |
| * adjusted based on configured MTU. |
| */ |
| #define QLCNIC_DEFAULT_INTR_COALESCE_RX_TIME_US 3 |
| #define QLCNIC_DEFAULT_INTR_COALESCE_RX_PACKETS 256 |
| #define QLCNIC_DEFAULT_INTR_COALESCE_TX_PACKETS 64 |
| #define QLCNIC_DEFAULT_INTR_COALESCE_TX_TIME_US 4 |
| |
| #define QLCNIC_INTR_DEFAULT 0x04 |
| |
| union qlcnic_nic_intr_coalesce_data { |
| struct { |
| u16 rx_packets; |
| u16 rx_time_us; |
| u16 tx_packets; |
| u16 tx_time_us; |
| } data; |
| u64 word; |
| }; |
| |
| struct qlcnic_nic_intr_coalesce { |
| u16 stats_time_us; |
| u16 rate_sample_time; |
| u16 flags; |
| u16 rsvd_1; |
| u32 low_threshold; |
| u32 high_threshold; |
| union qlcnic_nic_intr_coalesce_data normal; |
| union qlcnic_nic_intr_coalesce_data low; |
| union qlcnic_nic_intr_coalesce_data high; |
| union qlcnic_nic_intr_coalesce_data irq; |
| }; |
| |
| #define QLCNIC_HOST_REQUEST 0x13 |
| #define QLCNIC_REQUEST 0x14 |
| |
| #define QLCNIC_MAC_EVENT 0x1 |
| |
| #define QLCNIC_IP_UP 2 |
| #define QLCNIC_IP_DOWN 3 |
| |
| /* |
| * Driver --> Firmware |
| */ |
| #define QLCNIC_H2C_OPCODE_START 0 |
| #define QLCNIC_H2C_OPCODE_CONFIG_RSS 1 |
| #define QLCNIC_H2C_OPCODE_CONFIG_RSS_TBL 2 |
| #define QLCNIC_H2C_OPCODE_CONFIG_INTR_COALESCE 3 |
| #define QLCNIC_H2C_OPCODE_CONFIG_LED 4 |
| #define QLCNIC_H2C_OPCODE_CONFIG_PROMISCUOUS 5 |
| #define QLCNIC_H2C_OPCODE_CONFIG_L2_MAC 6 |
| #define QLCNIC_H2C_OPCODE_LRO_REQUEST 7 |
| #define QLCNIC_H2C_OPCODE_GET_SNMP_STATS 8 |
| #define QLCNIC_H2C_OPCODE_PROXY_START_REQUEST 9 |
| #define QLCNIC_H2C_OPCODE_PROXY_STOP_REQUEST 10 |
| #define QLCNIC_H2C_OPCODE_PROXY_SET_MTU 11 |
| #define QLCNIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE 12 |
| #define QLCNIC_H2C_OPCODE_GET_FINGER_PRINT_REQUEST 13 |
| #define QLCNIC_H2C_OPCODE_INSTALL_LICENSE_REQUEST 14 |
| #define QLCNIC_H2C_OPCODE_GET_LICENSE_CAPABILITY_REQUEST 15 |
| #define QLCNIC_H2C_OPCODE_GET_NET_STATS 16 |
| #define QLCNIC_H2C_OPCODE_PROXY_UPDATE_P2V 17 |
| #define QLCNIC_H2C_OPCODE_CONFIG_IPADDR 18 |
| #define QLCNIC_H2C_OPCODE_CONFIG_LOOPBACK 19 |
| #define QLCNIC_H2C_OPCODE_PROXY_STOP_DONE 20 |
| #define QLCNIC_H2C_OPCODE_GET_LINKEVENT 21 |
| #define QLCNIC_C2C_OPCODE 22 |
| #define QLCNIC_H2C_OPCODE_CONFIG_BRIDGING 23 |
| #define QLCNIC_H2C_OPCODE_CONFIG_HW_LRO 24 |
| #define QLCNIC_H2C_OPCODE_LAST 25 |
| /* |
| * Firmware --> Driver |
| */ |
| |
| #define QLCNIC_C2H_OPCODE_START 128 |
| #define QLCNIC_C2H_OPCODE_CONFIG_RSS_RESPONSE 129 |
| #define QLCNIC_C2H_OPCODE_CONFIG_RSS_TBL_RESPONSE 130 |
| #define QLCNIC_C2H_OPCODE_CONFIG_MAC_RESPONSE 131 |
| #define QLCNIC_C2H_OPCODE_CONFIG_PROMISCUOUS_RESPONSE 132 |
| #define QLCNIC_C2H_OPCODE_CONFIG_L2_MAC_RESPONSE 133 |
| #define QLCNIC_C2H_OPCODE_LRO_DELETE_RESPONSE 134 |
| #define QLCNIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE 135 |
| #define QLCNIC_C2H_OPCODE_GET_SNMP_STATS 136 |
| #define QLCNIC_C2H_OPCODE_GET_FINGER_PRINT_REPLY 137 |
| #define QLCNIC_C2H_OPCODE_INSTALL_LICENSE_REPLY 138 |
| #define QLCNIC_C2H_OPCODE_GET_LICENSE_CAPABILITIES_REPLY 139 |
| #define QLCNIC_C2H_OPCODE_GET_NET_STATS_RESPONSE 140 |
| #define QLCNIC_C2H_OPCODE_GET_LINKEVENT_RESPONSE 141 |
| #define QLCNIC_C2H_OPCODE_LAST 142 |
| |
| #define VPORT_MISS_MODE_DROP 0 /* drop all unmatched */ |
| #define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */ |
| #define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */ |
| |
| #define QLCNIC_LRO_REQUEST_CLEANUP 4 |
| |
| /* Capabilites received */ |
| #define QLCNIC_FW_CAPABILITY_BDG (1 << 8) |
| #define QLCNIC_FW_CAPABILITY_FVLANTX (1 << 9) |
| #define QLCNIC_FW_CAPABILITY_HW_LRO (1 << 10) |
| |
| /* module types */ |
| #define LINKEVENT_MODULE_NOT_PRESENT 1 |
| #define LINKEVENT_MODULE_OPTICAL_UNKNOWN 2 |
| #define LINKEVENT_MODULE_OPTICAL_SRLR 3 |
| #define LINKEVENT_MODULE_OPTICAL_LRM 4 |
| #define LINKEVENT_MODULE_OPTICAL_SFP_1G 5 |
| #define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE 6 |
| #define LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN 7 |
| #define LINKEVENT_MODULE_TWINAX 8 |
| |
| #define LINKSPEED_10GBPS 10000 |
| #define LINKSPEED_1GBPS 1000 |
| #define LINKSPEED_100MBPS 100 |
| #define LINKSPEED_10MBPS 10 |
| |
| #define LINKSPEED_ENCODED_10MBPS 0 |
| #define LINKSPEED_ENCODED_100MBPS 1 |
| #define LINKSPEED_ENCODED_1GBPS 2 |
| |
| #define LINKEVENT_AUTONEG_DISABLED 0 |
| #define LINKEVENT_AUTONEG_ENABLED 1 |
| |
| #define LINKEVENT_HALF_DUPLEX 0 |
| #define LINKEVENT_FULL_DUPLEX 1 |
| |
| #define LINKEVENT_LINKSPEED_MBPS 0 |
| #define LINKEVENT_LINKSPEED_ENCODED 1 |
| |
| #define AUTO_FW_RESET_ENABLED 0x01 |
| /* firmware response header: |
| * 63:58 - message type |
| * 57:56 - owner |
| * 55:53 - desc count |
| * 52:48 - reserved |
| * 47:40 - completion id |
| * 39:32 - opcode |
| * 31:16 - error code |
| * 15:00 - reserved |
| */ |
| #define qlcnic_get_nic_msg_opcode(msg_hdr) \ |
| ((msg_hdr >> 32) & 0xFF) |
| |
| struct qlcnic_fw_msg { |
| union { |
| struct { |
| u64 hdr; |
| u64 body[7]; |
| }; |
| u64 words[8]; |
| }; |
| }; |
| |
| struct qlcnic_nic_req { |
| __le64 qhdr; |
| __le64 req_hdr; |
| __le64 words[6]; |
| }; |
| |
| struct qlcnic_mac_req { |
| u8 op; |
| u8 tag; |
| u8 mac_addr[6]; |
| }; |
| |
| #define QLCNIC_MSI_ENABLED 0x02 |
| #define QLCNIC_MSIX_ENABLED 0x04 |
| #define QLCNIC_LRO_ENABLED 0x08 |
| #define QLCNIC_BRIDGE_ENABLED 0X10 |
| #define QLCNIC_DIAG_ENABLED 0x20 |
| #define QLCNIC_IS_MSI_FAMILY(adapter) \ |
| ((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED)) |
| |
| #define MSIX_ENTRIES_PER_ADAPTER NUM_STS_DESC_RINGS |
| #define QLCNIC_MSIX_TBL_SPACE 8192 |
| #define QLCNIC_PCI_REG_MSIX_TBL 0x44 |
| |
| #define QLCNIC_NETDEV_WEIGHT 128 |
| #define QLCNIC_ADAPTER_UP_MAGIC 777 |
| |
| #define __QLCNIC_FW_ATTACHED 0 |
| #define __QLCNIC_DEV_UP 1 |
| #define __QLCNIC_RESETTING 2 |
| #define __QLCNIC_START_FW 4 |
| |
| #define QLCNIC_INTERRUPT_TEST 1 |
| #define QLCNIC_LOOPBACK_TEST 2 |
| |
| struct qlcnic_adapter { |
| struct qlcnic_hardware_context ahw; |
| |
| struct net_device *netdev; |
| struct pci_dev *pdev; |
| struct list_head mac_list; |
| |
| spinlock_t tx_clean_lock; |
| |
| u16 num_txd; |
| u16 num_rxd; |
| u16 num_jumbo_rxd; |
| u16 num_lro_rxd; |
| |
| u8 max_rds_rings; |
| u8 max_sds_rings; |
| u8 driver_mismatch; |
| u8 msix_supported; |
| u8 rx_csum; |
| u8 pci_using_dac; |
| u8 portnum; |
| u8 physical_port; |
| |
| u8 mc_enabled; |
| u8 max_mc_count; |
| u8 rss_supported; |
| u8 rsrvd1; |
| u8 fw_wait_cnt; |
| u8 fw_fail_cnt; |
| u8 tx_timeo_cnt; |
| u8 need_fw_reset; |
| |
| u8 has_link_events; |
| u8 fw_type; |
| u16 tx_context_id; |
| u16 mtu; |
| u16 is_up; |
| |
| u16 link_speed; |
| u16 link_duplex; |
| u16 link_autoneg; |
| u16 module_type; |
| |
| u32 capabilities; |
| u32 flags; |
| u32 irq; |
| u32 temp; |
| |
| u32 int_vec_bit; |
| u32 heartbit; |
| |
| u8 dev_state; |
| u8 diag_test; |
| u8 diag_cnt; |
| u8 rsrd1; |
| u16 rsrd2; |
| |
| u8 mac_addr[ETH_ALEN]; |
| |
| struct qlcnic_adapter_stats stats; |
| |
| struct qlcnic_recv_context recv_ctx; |
| struct qlcnic_host_tx_ring *tx_ring; |
| |
| void __iomem *tgt_mask_reg; |
| void __iomem *tgt_status_reg; |
| void __iomem *crb_int_state_reg; |
| void __iomem *isr_int_vec; |
| |
| struct msix_entry msix_entries[MSIX_ENTRIES_PER_ADAPTER]; |
| |
| struct delayed_work fw_work; |
| |
| struct work_struct tx_timeout_task; |
| |
| struct qlcnic_nic_intr_coalesce coal; |
| |
| unsigned long state; |
| __le32 file_prd_off; /*File fw product offset*/ |
| u32 fw_version; |
| const struct firmware *fw; |
| }; |
| |
| int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val); |
| int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val); |
| |
| u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off); |
| int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data); |
| int qlcnic_pci_mem_write_2M(struct qlcnic_adapter *, u64 off, u64 data); |
| int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *, u64 off, u64 *data); |
| |
| #define QLCRD32(adapter, off) \ |
| (qlcnic_hw_read_wx_2M(adapter, off)) |
| #define QLCWR32(adapter, off, val) \ |
| (qlcnic_hw_write_wx_2M(adapter, off, val)) |
| |
| int qlcnic_pcie_sem_lock(struct qlcnic_adapter *, int, u32); |
| void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *, int); |
| |
| #define qlcnic_rom_lock(a) \ |
| qlcnic_pcie_sem_lock((a), 2, QLCNIC_ROM_LOCK_ID) |
| #define qlcnic_rom_unlock(a) \ |
| qlcnic_pcie_sem_unlock((a), 2) |
| #define qlcnic_phy_lock(a) \ |
| qlcnic_pcie_sem_lock((a), 3, QLCNIC_PHY_LOCK_ID) |
| #define qlcnic_phy_unlock(a) \ |
| qlcnic_pcie_sem_unlock((a), 3) |
| #define qlcnic_api_lock(a) \ |
| qlcnic_pcie_sem_lock((a), 5, 0) |
| #define qlcnic_api_unlock(a) \ |
| qlcnic_pcie_sem_unlock((a), 5) |
| #define qlcnic_sw_lock(a) \ |
| qlcnic_pcie_sem_lock((a), 6, 0) |
| #define qlcnic_sw_unlock(a) \ |
| qlcnic_pcie_sem_unlock((a), 6) |
| #define crb_win_lock(a) \ |
| qlcnic_pcie_sem_lock((a), 7, QLCNIC_CRB_WIN_LOCK_ID) |
| #define crb_win_unlock(a) \ |
| qlcnic_pcie_sem_unlock((a), 7) |
| |
| int qlcnic_get_board_info(struct qlcnic_adapter *adapter); |
| int qlcnic_wol_supported(struct qlcnic_adapter *adapter); |
| int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate); |
| |
| /* Functions from qlcnic_init.c */ |
| int qlcnic_phantom_init(struct qlcnic_adapter *adapter); |
| int qlcnic_load_firmware(struct qlcnic_adapter *adapter); |
| int qlcnic_need_fw_reset(struct qlcnic_adapter *adapter); |
| void qlcnic_request_firmware(struct qlcnic_adapter *adapter); |
| void qlcnic_release_firmware(struct qlcnic_adapter *adapter); |
| int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter); |
| |
| int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, int addr, int *valp); |
| int qlcnic_rom_fast_read_words(struct qlcnic_adapter *adapter, int addr, |
| u8 *bytes, size_t size); |
| int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter); |
| void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter); |
| |
| void __iomem *qlcnic_get_ioaddr(struct qlcnic_adapter *, u32); |
| |
| int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter); |
| void qlcnic_free_hw_resources(struct qlcnic_adapter *adapter); |
| |
| void qlcnic_release_rx_buffers(struct qlcnic_adapter *adapter); |
| void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter); |
| |
| int qlcnic_init_firmware(struct qlcnic_adapter *adapter); |
| void qlcnic_watchdog_task(struct work_struct *work); |
| void qlcnic_post_rx_buffers(struct qlcnic_adapter *adapter, u32 ringid, |
| struct qlcnic_host_rds_ring *rds_ring); |
| int qlcnic_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, int max); |
| void qlcnic_set_multi(struct net_device *netdev); |
| void qlcnic_free_mac_list(struct qlcnic_adapter *adapter); |
| int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, u32); |
| int qlcnic_config_intr_coalesce(struct qlcnic_adapter *adapter); |
| int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable); |
| int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd); |
| int qlcnic_linkevent_request(struct qlcnic_adapter *adapter, int enable); |
| void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup); |
| |
| int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu); |
| int qlcnic_change_mtu(struct net_device *netdev, int new_mtu); |
| int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable); |
| int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, int enable); |
| int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter); |
| void qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter, |
| struct qlcnic_host_tx_ring *tx_ring); |
| int qlcnic_get_mac_addr(struct qlcnic_adapter *adapter, u64 *mac); |
| void qlcnic_clear_ilb_mode(struct qlcnic_adapter *adapter); |
| int qlcnic_set_ilb_mode(struct qlcnic_adapter *adapter); |
| |
| /* Functions from qlcnic_main.c */ |
| int qlcnic_reset_context(struct qlcnic_adapter *); |
| u32 qlcnic_issue_cmd(struct qlcnic_adapter *adapter, |
| u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd); |
| void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings); |
| int qlcnic_diag_alloc_res(struct net_device *netdev, int test); |
| int qlcnic_check_loopback_buff(unsigned char *data); |
| netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev); |
| void qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring); |
| |
| /* |
| * QLOGIC Board information |
| */ |
| |
| #define QLCNIC_MAX_BOARD_NAME_LEN 100 |
| struct qlcnic_brdinfo { |
| unsigned short vendor; |
| unsigned short device; |
| unsigned short sub_vendor; |
| unsigned short sub_device; |
| char short_name[QLCNIC_MAX_BOARD_NAME_LEN]; |
| }; |
| |
| static const struct qlcnic_brdinfo qlcnic_boards[] = { |
| {0x1077, 0x8020, 0x1077, 0x203, |
| "8200 Series Single Port 10GbE Converged Network Adapter \ |
| (TCP/IP Networking)"}, |
| {0x1077, 0x8020, 0x1077, 0x207, |
| "8200 Series Dual Port 10GbE Converged Network Adapter \ |
| (TCP/IP Networking)"}, |
| {0x1077, 0x8020, 0x1077, 0x20b, |
| "3200 Series Dual Port 10Gb Intelligent Ethernet Adapter"}, |
| {0x1077, 0x8020, 0x1077, 0x20c, |
| "3200 Series Quad Port 1Gb Intelligent Ethernet Adapter"}, |
| {0x1077, 0x8020, 0x1077, 0x20f, |
| "3200 Series Single Port 10Gb Intelligent Ethernet Adapter"}, |
| {0x1077, 0x8020, 0x0, 0x0, "cLOM8214 1/10GbE Controller"}, |
| }; |
| |
| #define NUM_SUPPORTED_BOARDS ARRAY_SIZE(qlcnic_boards) |
| |
| static inline u32 qlcnic_tx_avail(struct qlcnic_host_tx_ring *tx_ring) |
| { |
| smp_mb(); |
| if (tx_ring->producer < tx_ring->sw_consumer) |
| return tx_ring->sw_consumer - tx_ring->producer; |
| else |
| return tx_ring->sw_consumer + tx_ring->num_desc - |
| tx_ring->producer; |
| } |
| |
| extern const struct ethtool_ops qlcnic_ethtool_ops; |
| |
| #endif /* __QLCNIC_H_ */ |