arm64: dts: juno: add CoreSight support for Juno r1/r2 variants
The CoreSight support added for Juno is valid for only Juno r0.
The Juno r1 and r2 variants have additional components and alternative
connection routes between trace source and sinks.
This patch builds on top of the existing r0 support and extends it to
Juno r1/r2 variants.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
[sudeep.holla@arm.com: minor changelog update and major reorganisation of
the common coresight components back into juno-base.dtsi to avoid
duplication, also renamed funnel node names]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
new file mode 100644
index 0000000..aa03050
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
@@ -0,0 +1,100 @@
+/ {
+ funnel@20130000 { /* cssys1 */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x20130000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* output port */
+ port@0 {
+ reg = <0>;
+ csys1_funnel_out_port: endpoint {
+ remote-endpoint = <&etf1_in_port>;
+ };
+ };
+
+ /* input port */
+ port@1 {
+ reg = <0>;
+ csys1_funnel_in_port0: endpoint {
+ slave-mode;
+ };
+ };
+
+ };
+ };
+
+ etf@20140000 { /* etf1 */
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0x20140000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* input port */
+ port@0 {
+ reg = <0>;
+ etf1_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&csys1_funnel_out_port>;
+ };
+ };
+
+ /* output port */
+ port@1 {
+ reg = <0>;
+ etf1_out_port: endpoint {
+ remote-endpoint = <&csys2_funnel_in_port1>;
+ };
+ };
+ };
+ };
+
+ funnel@20150000 { /* cssys2 */
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0 0x20150000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* output port */
+ port@0 {
+ reg = <0>;
+ csys2_funnel_out_port: endpoint {
+ remote-endpoint = <&replicator_in_port0>;
+ };
+ };
+
+ /* input ports */
+ port@1 {
+ reg = <0>;
+ csys2_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf0_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ csys2_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf1_out_port>;
+ };
+ };
+
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index b883a8a..aef138a 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "juno-base.dtsi"
+#include "juno-cs-r1r2.dtsi"
/ {
model = "ARM Juno development board (r1)";
@@ -226,3 +227,11 @@
&gpu1_thermal_zone {
status = "okay";
};
+
+&etf0_out_port {
+ remote-endpoint = <&csys2_funnel_in_port0>;
+};
+
+&replicator_in_port0 {
+ remote-endpoint = <&csys2_funnel_out_port>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index cfd8150..827da7c 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "juno-base.dtsi"
+#include "juno-cs-r1r2.dtsi"
/ {
model = "ARM Juno development board (r2)";
@@ -226,3 +227,11 @@
&gpu1_thermal_zone {
status = "okay";
};
+
+&etf0_out_port {
+ remote-endpoint = <&csys2_funnel_in_port0>;
+};
+
+&replicator_in_port0 {
+ remote-endpoint = <&csys2_funnel_out_port>;
+};