| /*************************************************************************** |
| * |
| * Copyright (C) 2007,2008 SMSC |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| *************************************************************************** |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/netdevice.h> |
| #include <linux/phy.h> |
| #include <linux/pci.h> |
| #include <linux/if_vlan.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/crc32.h> |
| #include <asm/unaligned.h> |
| #include "smsc9420.h" |
| |
| #define DRV_NAME "smsc9420" |
| #define PFX DRV_NAME ": " |
| #define DRV_MDIONAME "smsc9420-mdio" |
| #define DRV_DESCRIPTION "SMSC LAN9420 driver" |
| #define DRV_VERSION "1.01" |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| struct smsc9420_dma_desc { |
| u32 status; |
| u32 length; |
| u32 buffer1; |
| u32 buffer2; |
| }; |
| |
| struct smsc9420_ring_info { |
| struct sk_buff *skb; |
| dma_addr_t mapping; |
| }; |
| |
| struct smsc9420_pdata { |
| void __iomem *base_addr; |
| struct pci_dev *pdev; |
| struct net_device *dev; |
| |
| struct smsc9420_dma_desc *rx_ring; |
| struct smsc9420_dma_desc *tx_ring; |
| struct smsc9420_ring_info *tx_buffers; |
| struct smsc9420_ring_info *rx_buffers; |
| dma_addr_t rx_dma_addr; |
| dma_addr_t tx_dma_addr; |
| int tx_ring_head, tx_ring_tail; |
| int rx_ring_head, rx_ring_tail; |
| |
| spinlock_t int_lock; |
| spinlock_t phy_lock; |
| |
| struct napi_struct napi; |
| |
| bool software_irq_signal; |
| bool rx_csum; |
| u32 msg_enable; |
| |
| struct phy_device *phy_dev; |
| struct mii_bus *mii_bus; |
| int phy_irq[PHY_MAX_ADDR]; |
| int last_duplex; |
| int last_carrier; |
| }; |
| |
| static const struct pci_device_id smsc9420_id_table[] = { |
| { PCI_VENDOR_ID_9420, PCI_DEVICE_ID_9420, PCI_ANY_ID, PCI_ANY_ID, }, |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, smsc9420_id_table); |
| |
| #define SMSC_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) |
| |
| static uint smsc_debug; |
| static uint debug = -1; |
| module_param(debug, uint, 0); |
| MODULE_PARM_DESC(debug, "debug level"); |
| |
| #define smsc_dbg(TYPE, f, a...) \ |
| do { if ((pd)->msg_enable & NETIF_MSG_##TYPE) \ |
| printk(KERN_DEBUG PFX f "\n", ## a); \ |
| } while (0) |
| |
| #define smsc_info(TYPE, f, a...) \ |
| do { if ((pd)->msg_enable & NETIF_MSG_##TYPE) \ |
| printk(KERN_INFO PFX f "\n", ## a); \ |
| } while (0) |
| |
| #define smsc_warn(TYPE, f, a...) \ |
| do { if ((pd)->msg_enable & NETIF_MSG_##TYPE) \ |
| printk(KERN_WARNING PFX f "\n", ## a); \ |
| } while (0) |
| |
| static inline u32 smsc9420_reg_read(struct smsc9420_pdata *pd, u32 offset) |
| { |
| return ioread32(pd->base_addr + offset); |
| } |
| |
| static inline void |
| smsc9420_reg_write(struct smsc9420_pdata *pd, u32 offset, u32 value) |
| { |
| iowrite32(value, pd->base_addr + offset); |
| } |
| |
| static inline void smsc9420_pci_flush_write(struct smsc9420_pdata *pd) |
| { |
| /* to ensure PCI write completion, we must perform a PCI read */ |
| smsc9420_reg_read(pd, ID_REV); |
| } |
| |
| static int smsc9420_mii_read(struct mii_bus *bus, int phyaddr, int regidx) |
| { |
| struct smsc9420_pdata *pd = (struct smsc9420_pdata *)bus->priv; |
| unsigned long flags; |
| u32 addr; |
| int i, reg = -EIO; |
| |
| spin_lock_irqsave(&pd->phy_lock, flags); |
| |
| /* confirm MII not busy */ |
| if ((smsc9420_reg_read(pd, MII_ACCESS) & MII_ACCESS_MII_BUSY_)) { |
| smsc_warn(DRV, "MII is busy???"); |
| goto out; |
| } |
| |
| /* set the address, index & direction (read from PHY) */ |
| addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | |
| MII_ACCESS_MII_READ_; |
| smsc9420_reg_write(pd, MII_ACCESS, addr); |
| |
| /* wait for read to complete with 50us timeout */ |
| for (i = 0; i < 5; i++) { |
| if (!(smsc9420_reg_read(pd, MII_ACCESS) & |
| MII_ACCESS_MII_BUSY_)) { |
| reg = (u16)smsc9420_reg_read(pd, MII_DATA); |
| goto out; |
| } |
| udelay(10); |
| } |
| |
| smsc_warn(DRV, "MII busy timeout!"); |
| |
| out: |
| spin_unlock_irqrestore(&pd->phy_lock, flags); |
| return reg; |
| } |
| |
| static int smsc9420_mii_write(struct mii_bus *bus, int phyaddr, int regidx, |
| u16 val) |
| { |
| struct smsc9420_pdata *pd = (struct smsc9420_pdata *)bus->priv; |
| unsigned long flags; |
| u32 addr; |
| int i, reg = -EIO; |
| |
| spin_lock_irqsave(&pd->phy_lock, flags); |
| |
| /* confirm MII not busy */ |
| if ((smsc9420_reg_read(pd, MII_ACCESS) & MII_ACCESS_MII_BUSY_)) { |
| smsc_warn(DRV, "MII is busy???"); |
| goto out; |
| } |
| |
| /* put the data to write in the MAC */ |
| smsc9420_reg_write(pd, MII_DATA, (u32)val); |
| |
| /* set the address, index & direction (write to PHY) */ |
| addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | |
| MII_ACCESS_MII_WRITE_; |
| smsc9420_reg_write(pd, MII_ACCESS, addr); |
| |
| /* wait for write to complete with 50us timeout */ |
| for (i = 0; i < 5; i++) { |
| if (!(smsc9420_reg_read(pd, MII_ACCESS) & |
| MII_ACCESS_MII_BUSY_)) { |
| reg = 0; |
| goto out; |
| } |
| udelay(10); |
| } |
| |
| smsc_warn(DRV, "MII busy timeout!"); |
| |
| out: |
| spin_unlock_irqrestore(&pd->phy_lock, flags); |
| return reg; |
| } |
| |
| /* Returns hash bit number for given MAC address |
| * Example: |
| * 01 00 5E 00 00 01 -> returns bit number 31 */ |
| static u32 smsc9420_hash(u8 addr[ETH_ALEN]) |
| { |
| return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; |
| } |
| |
| static int smsc9420_eeprom_reload(struct smsc9420_pdata *pd) |
| { |
| int timeout = 100000; |
| |
| BUG_ON(!pd); |
| |
| if (smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_) { |
| smsc_dbg(DRV, "smsc9420_eeprom_reload: Eeprom busy"); |
| return -EIO; |
| } |
| |
| smsc9420_reg_write(pd, E2P_CMD, |
| (E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_RELOAD_)); |
| |
| do { |
| udelay(10); |
| if (!(smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_)) |
| return 0; |
| } while (timeout--); |
| |
| smsc_warn(DRV, "smsc9420_eeprom_reload: Eeprom timed out"); |
| return -EIO; |
| } |
| |
| /* Standard ioctls for mii-tool */ |
| static int smsc9420_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| |
| if (!netif_running(dev) || !pd->phy_dev) |
| return -EINVAL; |
| |
| return phy_mii_ioctl(pd->phy_dev, if_mii(ifr), cmd); |
| } |
| |
| static int smsc9420_ethtool_get_settings(struct net_device *dev, |
| struct ethtool_cmd *cmd) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| |
| cmd->maxtxpkt = 1; |
| cmd->maxrxpkt = 1; |
| return phy_ethtool_gset(pd->phy_dev, cmd); |
| } |
| |
| static int smsc9420_ethtool_set_settings(struct net_device *dev, |
| struct ethtool_cmd *cmd) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| |
| return phy_ethtool_sset(pd->phy_dev, cmd); |
| } |
| |
| static void smsc9420_ethtool_get_drvinfo(struct net_device *netdev, |
| struct ethtool_drvinfo *drvinfo) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(netdev); |
| |
| strcpy(drvinfo->driver, DRV_NAME); |
| strcpy(drvinfo->bus_info, pci_name(pd->pdev)); |
| strcpy(drvinfo->version, DRV_VERSION); |
| } |
| |
| static u32 smsc9420_ethtool_get_msglevel(struct net_device *netdev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(netdev); |
| return pd->msg_enable; |
| } |
| |
| static void smsc9420_ethtool_set_msglevel(struct net_device *netdev, u32 data) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(netdev); |
| pd->msg_enable = data; |
| } |
| |
| static int smsc9420_ethtool_nway_reset(struct net_device *netdev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(netdev); |
| return phy_start_aneg(pd->phy_dev); |
| } |
| |
| static int smsc9420_ethtool_getregslen(struct net_device *dev) |
| { |
| /* all smsc9420 registers plus all phy registers */ |
| return 0x100 + (32 * sizeof(u32)); |
| } |
| |
| static void |
| smsc9420_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, |
| void *buf) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| struct phy_device *phy_dev = pd->phy_dev; |
| unsigned int i, j = 0; |
| u32 *data = buf; |
| |
| regs->version = smsc9420_reg_read(pd, ID_REV); |
| for (i = 0; i < 0x100; i += (sizeof(u32))) |
| data[j++] = smsc9420_reg_read(pd, i); |
| |
| for (i = 0; i <= 31; i++) |
| data[j++] = smsc9420_mii_read(phy_dev->bus, phy_dev->addr, i); |
| } |
| |
| static void smsc9420_eeprom_enable_access(struct smsc9420_pdata *pd) |
| { |
| unsigned int temp = smsc9420_reg_read(pd, GPIO_CFG); |
| temp &= ~GPIO_CFG_EEPR_EN_; |
| smsc9420_reg_write(pd, GPIO_CFG, temp); |
| msleep(1); |
| } |
| |
| static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op) |
| { |
| int timeout = 100; |
| u32 e2cmd; |
| |
| smsc_dbg(HW, "op 0x%08x", op); |
| if (smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_) { |
| smsc_warn(HW, "Busy at start"); |
| return -EBUSY; |
| } |
| |
| e2cmd = op | E2P_CMD_EPC_BUSY_; |
| smsc9420_reg_write(pd, E2P_CMD, e2cmd); |
| |
| do { |
| msleep(1); |
| e2cmd = smsc9420_reg_read(pd, E2P_CMD); |
| } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--)); |
| |
| if (!timeout) { |
| smsc_info(HW, "TIMED OUT"); |
| return -EAGAIN; |
| } |
| |
| if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { |
| smsc_info(HW, "Error occured during eeprom operation"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc9420_eeprom_read_location(struct smsc9420_pdata *pd, |
| u8 address, u8 *data) |
| { |
| u32 op = E2P_CMD_EPC_CMD_READ_ | address; |
| int ret; |
| |
| smsc_dbg(HW, "address 0x%x", address); |
| ret = smsc9420_eeprom_send_cmd(pd, op); |
| |
| if (!ret) |
| data[address] = smsc9420_reg_read(pd, E2P_DATA); |
| |
| return ret; |
| } |
| |
| static int smsc9420_eeprom_write_location(struct smsc9420_pdata *pd, |
| u8 address, u8 data) |
| { |
| u32 op = E2P_CMD_EPC_CMD_ERASE_ | address; |
| int ret; |
| |
| smsc_dbg(HW, "address 0x%x, data 0x%x", address, data); |
| ret = smsc9420_eeprom_send_cmd(pd, op); |
| |
| if (!ret) { |
| op = E2P_CMD_EPC_CMD_WRITE_ | address; |
| smsc9420_reg_write(pd, E2P_DATA, (u32)data); |
| ret = smsc9420_eeprom_send_cmd(pd, op); |
| } |
| |
| return ret; |
| } |
| |
| static int smsc9420_ethtool_get_eeprom_len(struct net_device *dev) |
| { |
| return SMSC9420_EEPROM_SIZE; |
| } |
| |
| static int smsc9420_ethtool_get_eeprom(struct net_device *dev, |
| struct ethtool_eeprom *eeprom, u8 *data) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| u8 eeprom_data[SMSC9420_EEPROM_SIZE]; |
| int len, i; |
| |
| smsc9420_eeprom_enable_access(pd); |
| |
| len = min(eeprom->len, SMSC9420_EEPROM_SIZE); |
| for (i = 0; i < len; i++) { |
| int ret = smsc9420_eeprom_read_location(pd, i, eeprom_data); |
| if (ret < 0) { |
| eeprom->len = 0; |
| return ret; |
| } |
| } |
| |
| memcpy(data, &eeprom_data[eeprom->offset], len); |
| eeprom->len = len; |
| return 0; |
| } |
| |
| static int smsc9420_ethtool_set_eeprom(struct net_device *dev, |
| struct ethtool_eeprom *eeprom, u8 *data) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| int ret; |
| |
| smsc9420_eeprom_enable_access(pd); |
| smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_); |
| ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data); |
| smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWDS_); |
| |
| /* Single byte write, according to man page */ |
| eeprom->len = 1; |
| |
| return ret; |
| } |
| |
| static const struct ethtool_ops smsc9420_ethtool_ops = { |
| .get_settings = smsc9420_ethtool_get_settings, |
| .set_settings = smsc9420_ethtool_set_settings, |
| .get_drvinfo = smsc9420_ethtool_get_drvinfo, |
| .get_msglevel = smsc9420_ethtool_get_msglevel, |
| .set_msglevel = smsc9420_ethtool_set_msglevel, |
| .nway_reset = smsc9420_ethtool_nway_reset, |
| .get_link = ethtool_op_get_link, |
| .get_eeprom_len = smsc9420_ethtool_get_eeprom_len, |
| .get_eeprom = smsc9420_ethtool_get_eeprom, |
| .set_eeprom = smsc9420_ethtool_set_eeprom, |
| .get_regs_len = smsc9420_ethtool_getregslen, |
| .get_regs = smsc9420_ethtool_getregs, |
| }; |
| |
| /* Sets the device MAC address to dev_addr */ |
| static void smsc9420_set_mac_address(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| u8 *dev_addr = dev->dev_addr; |
| u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; |
| u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | |
| (dev_addr[1] << 8) | dev_addr[0]; |
| |
| smsc9420_reg_write(pd, ADDRH, mac_high16); |
| smsc9420_reg_write(pd, ADDRL, mac_low32); |
| } |
| |
| static void smsc9420_check_mac_address(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| |
| /* Check if mac address has been specified when bringing interface up */ |
| if (is_valid_ether_addr(dev->dev_addr)) { |
| smsc9420_set_mac_address(dev); |
| smsc_dbg(PROBE, "MAC Address is specified by configuration"); |
| } else { |
| /* Try reading mac address from device. if EEPROM is present |
| * it will already have been set */ |
| u32 mac_high16 = smsc9420_reg_read(pd, ADDRH); |
| u32 mac_low32 = smsc9420_reg_read(pd, ADDRL); |
| dev->dev_addr[0] = (u8)(mac_low32); |
| dev->dev_addr[1] = (u8)(mac_low32 >> 8); |
| dev->dev_addr[2] = (u8)(mac_low32 >> 16); |
| dev->dev_addr[3] = (u8)(mac_low32 >> 24); |
| dev->dev_addr[4] = (u8)(mac_high16); |
| dev->dev_addr[5] = (u8)(mac_high16 >> 8); |
| |
| if (is_valid_ether_addr(dev->dev_addr)) { |
| /* eeprom values are valid so use them */ |
| smsc_dbg(PROBE, "Mac Address is read from EEPROM"); |
| } else { |
| /* eeprom values are invalid, generate random MAC */ |
| random_ether_addr(dev->dev_addr); |
| smsc9420_set_mac_address(dev); |
| smsc_dbg(PROBE, |
| "MAC Address is set to random_ether_addr"); |
| } |
| } |
| } |
| |
| static void smsc9420_stop_tx(struct smsc9420_pdata *pd) |
| { |
| u32 dmac_control, mac_cr, dma_intr_ena; |
| int timeout = 1000; |
| |
| /* disable TX DMAC */ |
| dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL); |
| dmac_control &= (~DMAC_CONTROL_ST_); |
| smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control); |
| |
| /* Wait max 10ms for transmit process to stop */ |
| while (--timeout) { |
| if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_TS_) |
| break; |
| udelay(10); |
| } |
| |
| if (!timeout) |
| smsc_warn(IFDOWN, "TX DMAC failed to stop"); |
| |
| /* ACK Tx DMAC stop bit */ |
| smsc9420_reg_write(pd, DMAC_STATUS, DMAC_STS_TXPS_); |
| |
| /* mask TX DMAC interrupts */ |
| dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); |
| dma_intr_ena &= ~(DMAC_INTR_ENA_TX_); |
| smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); |
| smsc9420_pci_flush_write(pd); |
| |
| /* stop MAC TX */ |
| mac_cr = smsc9420_reg_read(pd, MAC_CR) & (~MAC_CR_TXEN_); |
| smsc9420_reg_write(pd, MAC_CR, mac_cr); |
| smsc9420_pci_flush_write(pd); |
| } |
| |
| static void smsc9420_free_tx_ring(struct smsc9420_pdata *pd) |
| { |
| int i; |
| |
| BUG_ON(!pd->tx_ring); |
| |
| if (!pd->tx_buffers) |
| return; |
| |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| struct sk_buff *skb = pd->tx_buffers[i].skb; |
| |
| if (skb) { |
| BUG_ON(!pd->tx_buffers[i].mapping); |
| pci_unmap_single(pd->pdev, pd->tx_buffers[i].mapping, |
| skb->len, PCI_DMA_TODEVICE); |
| dev_kfree_skb_any(skb); |
| } |
| |
| pd->tx_ring[i].status = 0; |
| pd->tx_ring[i].length = 0; |
| pd->tx_ring[i].buffer1 = 0; |
| pd->tx_ring[i].buffer2 = 0; |
| } |
| wmb(); |
| |
| kfree(pd->tx_buffers); |
| pd->tx_buffers = NULL; |
| |
| pd->tx_ring_head = 0; |
| pd->tx_ring_tail = 0; |
| } |
| |
| static void smsc9420_free_rx_ring(struct smsc9420_pdata *pd) |
| { |
| int i; |
| |
| BUG_ON(!pd->rx_ring); |
| |
| if (!pd->rx_buffers) |
| return; |
| |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| if (pd->rx_buffers[i].skb) |
| dev_kfree_skb_any(pd->rx_buffers[i].skb); |
| |
| if (pd->rx_buffers[i].mapping) |
| pci_unmap_single(pd->pdev, pd->rx_buffers[i].mapping, |
| PKT_BUF_SZ, PCI_DMA_FROMDEVICE); |
| |
| pd->rx_ring[i].status = 0; |
| pd->rx_ring[i].length = 0; |
| pd->rx_ring[i].buffer1 = 0; |
| pd->rx_ring[i].buffer2 = 0; |
| } |
| wmb(); |
| |
| kfree(pd->rx_buffers); |
| pd->rx_buffers = NULL; |
| |
| pd->rx_ring_head = 0; |
| pd->rx_ring_tail = 0; |
| } |
| |
| static void smsc9420_stop_rx(struct smsc9420_pdata *pd) |
| { |
| int timeout = 1000; |
| u32 mac_cr, dmac_control, dma_intr_ena; |
| |
| /* mask RX DMAC interrupts */ |
| dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); |
| dma_intr_ena &= (~DMAC_INTR_ENA_RX_); |
| smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); |
| smsc9420_pci_flush_write(pd); |
| |
| /* stop RX MAC prior to stoping DMA */ |
| mac_cr = smsc9420_reg_read(pd, MAC_CR) & (~MAC_CR_RXEN_); |
| smsc9420_reg_write(pd, MAC_CR, mac_cr); |
| smsc9420_pci_flush_write(pd); |
| |
| /* stop RX DMAC */ |
| dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL); |
| dmac_control &= (~DMAC_CONTROL_SR_); |
| smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control); |
| smsc9420_pci_flush_write(pd); |
| |
| /* wait up to 10ms for receive to stop */ |
| while (--timeout) { |
| if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_RS_) |
| break; |
| udelay(10); |
| } |
| |
| if (!timeout) |
| smsc_warn(IFDOWN, "RX DMAC did not stop! timeout."); |
| |
| /* ACK the Rx DMAC stop bit */ |
| smsc9420_reg_write(pd, DMAC_STATUS, DMAC_STS_RXPS_); |
| } |
| |
| static irqreturn_t smsc9420_isr(int irq, void *dev_id) |
| { |
| struct smsc9420_pdata *pd = dev_id; |
| u32 int_cfg, int_sts, int_ctl; |
| irqreturn_t ret = IRQ_NONE; |
| ulong flags; |
| |
| BUG_ON(!pd); |
| BUG_ON(!pd->base_addr); |
| |
| int_cfg = smsc9420_reg_read(pd, INT_CFG); |
| |
| /* check if it's our interrupt */ |
| if ((int_cfg & (INT_CFG_IRQ_EN_ | INT_CFG_IRQ_INT_)) != |
| (INT_CFG_IRQ_EN_ | INT_CFG_IRQ_INT_)) |
| return IRQ_NONE; |
| |
| int_sts = smsc9420_reg_read(pd, INT_STAT); |
| |
| if (likely(INT_STAT_DMAC_INT_ & int_sts)) { |
| u32 status = smsc9420_reg_read(pd, DMAC_STATUS); |
| u32 ints_to_clear = 0; |
| |
| if (status & DMAC_STS_TX_) { |
| ints_to_clear |= (DMAC_STS_TX_ | DMAC_STS_NIS_); |
| netif_wake_queue(pd->dev); |
| } |
| |
| if (status & DMAC_STS_RX_) { |
| /* mask RX DMAC interrupts */ |
| u32 dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); |
| dma_intr_ena &= (~DMAC_INTR_ENA_RX_); |
| smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); |
| smsc9420_pci_flush_write(pd); |
| |
| ints_to_clear |= (DMAC_STS_RX_ | DMAC_STS_NIS_); |
| napi_schedule(&pd->napi); |
| } |
| |
| if (ints_to_clear) |
| smsc9420_reg_write(pd, DMAC_STATUS, ints_to_clear); |
| |
| ret = IRQ_HANDLED; |
| } |
| |
| if (unlikely(INT_STAT_SW_INT_ & int_sts)) { |
| /* mask software interrupt */ |
| spin_lock_irqsave(&pd->int_lock, flags); |
| int_ctl = smsc9420_reg_read(pd, INT_CTL); |
| int_ctl &= (~INT_CTL_SW_INT_EN_); |
| smsc9420_reg_write(pd, INT_CTL, int_ctl); |
| spin_unlock_irqrestore(&pd->int_lock, flags); |
| |
| smsc9420_reg_write(pd, INT_STAT, INT_STAT_SW_INT_); |
| pd->software_irq_signal = true; |
| smp_wmb(); |
| |
| ret = IRQ_HANDLED; |
| } |
| |
| /* to ensure PCI write completion, we must perform a PCI read */ |
| smsc9420_pci_flush_write(pd); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void smsc9420_poll_controller(struct net_device *dev) |
| { |
| disable_irq(dev->irq); |
| smsc9420_isr(0, dev); |
| enable_irq(dev->irq); |
| } |
| #endif /* CONFIG_NET_POLL_CONTROLLER */ |
| |
| static void smsc9420_dmac_soft_reset(struct smsc9420_pdata *pd) |
| { |
| smsc9420_reg_write(pd, BUS_MODE, BUS_MODE_SWR_); |
| smsc9420_reg_read(pd, BUS_MODE); |
| udelay(2); |
| if (smsc9420_reg_read(pd, BUS_MODE) & BUS_MODE_SWR_) |
| smsc_warn(DRV, "Software reset not cleared"); |
| } |
| |
| static int smsc9420_stop(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| u32 int_cfg; |
| ulong flags; |
| |
| BUG_ON(!pd); |
| BUG_ON(!pd->phy_dev); |
| |
| /* disable master interrupt */ |
| spin_lock_irqsave(&pd->int_lock, flags); |
| int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); |
| smsc9420_reg_write(pd, INT_CFG, int_cfg); |
| spin_unlock_irqrestore(&pd->int_lock, flags); |
| |
| netif_tx_disable(dev); |
| napi_disable(&pd->napi); |
| |
| smsc9420_stop_tx(pd); |
| smsc9420_free_tx_ring(pd); |
| |
| smsc9420_stop_rx(pd); |
| smsc9420_free_rx_ring(pd); |
| |
| free_irq(dev->irq, pd); |
| |
| smsc9420_dmac_soft_reset(pd); |
| |
| phy_stop(pd->phy_dev); |
| |
| phy_disconnect(pd->phy_dev); |
| pd->phy_dev = NULL; |
| mdiobus_unregister(pd->mii_bus); |
| mdiobus_free(pd->mii_bus); |
| |
| return 0; |
| } |
| |
| static void smsc9420_rx_count_stats(struct net_device *dev, u32 desc_status) |
| { |
| if (unlikely(desc_status & RDES0_ERROR_SUMMARY_)) { |
| dev->stats.rx_errors++; |
| if (desc_status & RDES0_DESCRIPTOR_ERROR_) |
| dev->stats.rx_over_errors++; |
| else if (desc_status & (RDES0_FRAME_TOO_LONG_ | |
| RDES0_RUNT_FRAME_ | RDES0_COLLISION_SEEN_)) |
| dev->stats.rx_frame_errors++; |
| else if (desc_status & RDES0_CRC_ERROR_) |
| dev->stats.rx_crc_errors++; |
| } |
| |
| if (unlikely(desc_status & RDES0_LENGTH_ERROR_)) |
| dev->stats.rx_length_errors++; |
| |
| if (unlikely(!((desc_status & RDES0_LAST_DESCRIPTOR_) && |
| (desc_status & RDES0_FIRST_DESCRIPTOR_)))) |
| dev->stats.rx_length_errors++; |
| |
| if (desc_status & RDES0_MULTICAST_FRAME_) |
| dev->stats.multicast++; |
| } |
| |
| static void smsc9420_rx_handoff(struct smsc9420_pdata *pd, const int index, |
| const u32 status) |
| { |
| struct net_device *dev = pd->dev; |
| struct sk_buff *skb; |
| u16 packet_length = (status & RDES0_FRAME_LENGTH_MASK_) |
| >> RDES0_FRAME_LENGTH_SHFT_; |
| |
| /* remove crc from packet lendth */ |
| packet_length -= 4; |
| |
| if (pd->rx_csum) |
| packet_length -= 2; |
| |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += packet_length; |
| |
| pci_unmap_single(pd->pdev, pd->rx_buffers[index].mapping, |
| PKT_BUF_SZ, PCI_DMA_FROMDEVICE); |
| pd->rx_buffers[index].mapping = 0; |
| |
| skb = pd->rx_buffers[index].skb; |
| pd->rx_buffers[index].skb = NULL; |
| |
| if (pd->rx_csum) { |
| u16 hw_csum = get_unaligned_le16(skb_tail_pointer(skb) + |
| NET_IP_ALIGN + packet_length + 4); |
| put_unaligned_le16(cpu_to_le16(hw_csum), &skb->csum); |
| skb->ip_summed = CHECKSUM_COMPLETE; |
| } |
| |
| skb_reserve(skb, NET_IP_ALIGN); |
| skb_put(skb, packet_length); |
| |
| skb->protocol = eth_type_trans(skb, dev); |
| |
| netif_receive_skb(skb); |
| dev->last_rx = jiffies; |
| } |
| |
| static int smsc9420_alloc_rx_buffer(struct smsc9420_pdata *pd, int index) |
| { |
| struct sk_buff *skb = netdev_alloc_skb(pd->dev, PKT_BUF_SZ); |
| dma_addr_t mapping; |
| |
| BUG_ON(pd->rx_buffers[index].skb); |
| BUG_ON(pd->rx_buffers[index].mapping); |
| |
| if (unlikely(!skb)) { |
| smsc_warn(RX_ERR, "Failed to allocate new skb!"); |
| return -ENOMEM; |
| } |
| |
| skb->dev = pd->dev; |
| |
| mapping = pci_map_single(pd->pdev, skb_tail_pointer(skb), |
| PKT_BUF_SZ, PCI_DMA_FROMDEVICE); |
| if (pci_dma_mapping_error(pd->pdev, mapping)) { |
| dev_kfree_skb_any(skb); |
| smsc_warn(RX_ERR, "pci_map_single failed!"); |
| return -ENOMEM; |
| } |
| |
| pd->rx_buffers[index].skb = skb; |
| pd->rx_buffers[index].mapping = mapping; |
| pd->rx_ring[index].buffer1 = mapping + NET_IP_ALIGN; |
| pd->rx_ring[index].status = RDES0_OWN_; |
| wmb(); |
| |
| return 0; |
| } |
| |
| static void smsc9420_alloc_new_rx_buffers(struct smsc9420_pdata *pd) |
| { |
| while (pd->rx_ring_tail != pd->rx_ring_head) { |
| if (smsc9420_alloc_rx_buffer(pd, pd->rx_ring_tail)) |
| break; |
| |
| pd->rx_ring_tail = (pd->rx_ring_tail + 1) % RX_RING_SIZE; |
| } |
| } |
| |
| static int smsc9420_rx_poll(struct napi_struct *napi, int budget) |
| { |
| struct smsc9420_pdata *pd = |
| container_of(napi, struct smsc9420_pdata, napi); |
| struct net_device *dev = pd->dev; |
| u32 drop_frame_cnt, dma_intr_ena, status; |
| int work_done; |
| |
| for (work_done = 0; work_done < budget; work_done++) { |
| rmb(); |
| status = pd->rx_ring[pd->rx_ring_head].status; |
| |
| /* stop if DMAC owns this dma descriptor */ |
| if (status & RDES0_OWN_) |
| break; |
| |
| smsc9420_rx_count_stats(dev, status); |
| smsc9420_rx_handoff(pd, pd->rx_ring_head, status); |
| pd->rx_ring_head = (pd->rx_ring_head + 1) % RX_RING_SIZE; |
| smsc9420_alloc_new_rx_buffers(pd); |
| } |
| |
| drop_frame_cnt = smsc9420_reg_read(pd, MISS_FRAME_CNTR); |
| dev->stats.rx_dropped += |
| (drop_frame_cnt & 0xFFFF) + ((drop_frame_cnt >> 17) & 0x3FF); |
| |
| /* Kick RXDMA */ |
| smsc9420_reg_write(pd, RX_POLL_DEMAND, 1); |
| smsc9420_pci_flush_write(pd); |
| |
| if (work_done < budget) { |
| napi_complete(&pd->napi); |
| |
| /* re-enable RX DMA interrupts */ |
| dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); |
| dma_intr_ena |= (DMAC_INTR_ENA_RX_ | DMAC_INTR_ENA_NIS_); |
| smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); |
| smsc9420_pci_flush_write(pd); |
| } |
| return work_done; |
| } |
| |
| static void |
| smsc9420_tx_update_stats(struct net_device *dev, u32 status, u32 length) |
| { |
| if (unlikely(status & TDES0_ERROR_SUMMARY_)) { |
| dev->stats.tx_errors++; |
| if (status & (TDES0_EXCESSIVE_DEFERRAL_ | |
| TDES0_EXCESSIVE_COLLISIONS_)) |
| dev->stats.tx_aborted_errors++; |
| |
| if (status & (TDES0_LOSS_OF_CARRIER_ | TDES0_NO_CARRIER_)) |
| dev->stats.tx_carrier_errors++; |
| } else { |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += (length & 0x7FF); |
| } |
| |
| if (unlikely(status & TDES0_EXCESSIVE_COLLISIONS_)) { |
| dev->stats.collisions += 16; |
| } else { |
| dev->stats.collisions += |
| (status & TDES0_COLLISION_COUNT_MASK_) >> |
| TDES0_COLLISION_COUNT_SHFT_; |
| } |
| |
| if (unlikely(status & TDES0_HEARTBEAT_FAIL_)) |
| dev->stats.tx_heartbeat_errors++; |
| } |
| |
| /* Check for completed dma transfers, update stats and free skbs */ |
| static void smsc9420_complete_tx(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| |
| while (pd->tx_ring_tail != pd->tx_ring_head) { |
| int index = pd->tx_ring_tail; |
| u32 status, length; |
| |
| rmb(); |
| status = pd->tx_ring[index].status; |
| length = pd->tx_ring[index].length; |
| |
| /* Check if DMA still owns this descriptor */ |
| if (unlikely(TDES0_OWN_ & status)) |
| break; |
| |
| smsc9420_tx_update_stats(dev, status, length); |
| |
| BUG_ON(!pd->tx_buffers[index].skb); |
| BUG_ON(!pd->tx_buffers[index].mapping); |
| |
| pci_unmap_single(pd->pdev, pd->tx_buffers[index].mapping, |
| pd->tx_buffers[index].skb->len, PCI_DMA_TODEVICE); |
| pd->tx_buffers[index].mapping = 0; |
| |
| dev_kfree_skb_any(pd->tx_buffers[index].skb); |
| pd->tx_buffers[index].skb = NULL; |
| |
| pd->tx_ring[index].buffer1 = 0; |
| wmb(); |
| |
| pd->tx_ring_tail = (pd->tx_ring_tail + 1) % TX_RING_SIZE; |
| } |
| } |
| |
| static int smsc9420_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| dma_addr_t mapping; |
| int index = pd->tx_ring_head; |
| u32 tmp_desc1; |
| bool about_to_take_last_desc = |
| (((pd->tx_ring_head + 2) % TX_RING_SIZE) == pd->tx_ring_tail); |
| |
| smsc9420_complete_tx(dev); |
| |
| rmb(); |
| BUG_ON(pd->tx_ring[index].status & TDES0_OWN_); |
| BUG_ON(pd->tx_buffers[index].skb); |
| BUG_ON(pd->tx_buffers[index].mapping); |
| |
| mapping = pci_map_single(pd->pdev, skb->data, |
| skb->len, PCI_DMA_TODEVICE); |
| if (pci_dma_mapping_error(pd->pdev, mapping)) { |
| smsc_warn(TX_ERR, "pci_map_single failed, dropping packet"); |
| return NETDEV_TX_BUSY; |
| } |
| |
| pd->tx_buffers[index].skb = skb; |
| pd->tx_buffers[index].mapping = mapping; |
| |
| tmp_desc1 = (TDES1_LS_ | ((u32)skb->len & 0x7FF)); |
| if (unlikely(about_to_take_last_desc)) { |
| tmp_desc1 |= TDES1_IC_; |
| netif_stop_queue(pd->dev); |
| } |
| |
| /* check if we are at the last descriptor and need to set EOR */ |
| if (unlikely(index == (TX_RING_SIZE - 1))) |
| tmp_desc1 |= TDES1_TER_; |
| |
| pd->tx_ring[index].buffer1 = mapping; |
| pd->tx_ring[index].length = tmp_desc1; |
| wmb(); |
| |
| /* increment head */ |
| pd->tx_ring_head = (pd->tx_ring_head + 1) % TX_RING_SIZE; |
| |
| /* assign ownership to DMAC */ |
| pd->tx_ring[index].status = TDES0_OWN_; |
| wmb(); |
| |
| /* kick the DMA */ |
| smsc9420_reg_write(pd, TX_POLL_DEMAND, 1); |
| smsc9420_pci_flush_write(pd); |
| |
| dev->trans_start = jiffies; |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static struct net_device_stats *smsc9420_get_stats(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| u32 counter = smsc9420_reg_read(pd, MISS_FRAME_CNTR); |
| dev->stats.rx_dropped += |
| (counter & 0x0000FFFF) + ((counter >> 17) & 0x000003FF); |
| return &dev->stats; |
| } |
| |
| static void smsc9420_set_multicast_list(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| u32 mac_cr = smsc9420_reg_read(pd, MAC_CR); |
| |
| if (dev->flags & IFF_PROMISC) { |
| smsc_dbg(HW, "Promiscuous Mode Enabled"); |
| mac_cr |= MAC_CR_PRMS_; |
| mac_cr &= (~MAC_CR_MCPAS_); |
| mac_cr &= (~MAC_CR_HPFILT_); |
| } else if (dev->flags & IFF_ALLMULTI) { |
| smsc_dbg(HW, "Receive all Multicast Enabled"); |
| mac_cr &= (~MAC_CR_PRMS_); |
| mac_cr |= MAC_CR_MCPAS_; |
| mac_cr &= (~MAC_CR_HPFILT_); |
| } else if (dev->mc_count > 0) { |
| struct dev_mc_list *mc_list = dev->mc_list; |
| u32 hash_lo = 0, hash_hi = 0; |
| |
| smsc_dbg(HW, "Multicast filter enabled"); |
| while (mc_list) { |
| u32 bit_num = smsc9420_hash(mc_list->dmi_addr); |
| u32 mask = 1 << (bit_num & 0x1F); |
| |
| if (bit_num & 0x20) |
| hash_hi |= mask; |
| else |
| hash_lo |= mask; |
| |
| mc_list = mc_list->next; |
| } |
| smsc9420_reg_write(pd, HASHH, hash_hi); |
| smsc9420_reg_write(pd, HASHL, hash_lo); |
| |
| mac_cr &= (~MAC_CR_PRMS_); |
| mac_cr &= (~MAC_CR_MCPAS_); |
| mac_cr |= MAC_CR_HPFILT_; |
| } else { |
| smsc_dbg(HW, "Receive own packets only."); |
| smsc9420_reg_write(pd, HASHH, 0); |
| smsc9420_reg_write(pd, HASHL, 0); |
| |
| mac_cr &= (~MAC_CR_PRMS_); |
| mac_cr &= (~MAC_CR_MCPAS_); |
| mac_cr &= (~MAC_CR_HPFILT_); |
| } |
| |
| smsc9420_reg_write(pd, MAC_CR, mac_cr); |
| smsc9420_pci_flush_write(pd); |
| } |
| |
| static void smsc9420_phy_update_flowcontrol(struct smsc9420_pdata *pd) |
| { |
| struct phy_device *phy_dev = pd->phy_dev; |
| u32 flow; |
| |
| if (phy_dev->duplex == DUPLEX_FULL) { |
| u16 lcladv = phy_read(phy_dev, MII_ADVERTISE); |
| u16 rmtadv = phy_read(phy_dev, MII_LPA); |
| u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); |
| |
| if (cap & FLOW_CTRL_RX) |
| flow = 0xFFFF0002; |
| else |
| flow = 0; |
| |
| smsc_info(LINK, "rx pause %s, tx pause %s", |
| (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), |
| (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); |
| } else { |
| smsc_info(LINK, "half duplex"); |
| flow = 0; |
| } |
| |
| smsc9420_reg_write(pd, FLOW, flow); |
| } |
| |
| /* Update link mode if anything has changed. Called periodically when the |
| * PHY is in polling mode, even if nothing has changed. */ |
| static void smsc9420_phy_adjust_link(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| struct phy_device *phy_dev = pd->phy_dev; |
| int carrier; |
| |
| if (phy_dev->duplex != pd->last_duplex) { |
| u32 mac_cr = smsc9420_reg_read(pd, MAC_CR); |
| if (phy_dev->duplex) { |
| smsc_dbg(LINK, "full duplex mode"); |
| mac_cr |= MAC_CR_FDPX_; |
| } else { |
| smsc_dbg(LINK, "half duplex mode"); |
| mac_cr &= ~MAC_CR_FDPX_; |
| } |
| smsc9420_reg_write(pd, MAC_CR, mac_cr); |
| |
| smsc9420_phy_update_flowcontrol(pd); |
| pd->last_duplex = phy_dev->duplex; |
| } |
| |
| carrier = netif_carrier_ok(dev); |
| if (carrier != pd->last_carrier) { |
| if (carrier) |
| smsc_dbg(LINK, "carrier OK"); |
| else |
| smsc_dbg(LINK, "no carrier"); |
| pd->last_carrier = carrier; |
| } |
| } |
| |
| static int smsc9420_mii_probe(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| struct phy_device *phydev = NULL; |
| |
| BUG_ON(pd->phy_dev); |
| |
| /* Device only supports internal PHY at address 1 */ |
| if (!pd->mii_bus->phy_map[1]) { |
| pr_err("%s: no PHY found at address 1\n", dev->name); |
| return -ENODEV; |
| } |
| |
| phydev = pd->mii_bus->phy_map[1]; |
| smsc_info(PROBE, "PHY addr %d, phy_id 0x%08X", phydev->addr, |
| phydev->phy_id); |
| |
| phydev = phy_connect(dev, dev_name(&phydev->dev), |
| &smsc9420_phy_adjust_link, 0, PHY_INTERFACE_MODE_MII); |
| |
| if (IS_ERR(phydev)) { |
| pr_err("%s: Could not attach to PHY\n", dev->name); |
| return PTR_ERR(phydev); |
| } |
| |
| pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", |
| dev->name, phydev->drv->name, dev_name(&phydev->dev), phydev->irq); |
| |
| /* mask with MAC supported features */ |
| phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | |
| SUPPORTED_Asym_Pause); |
| phydev->advertising = phydev->supported; |
| |
| pd->phy_dev = phydev; |
| pd->last_duplex = -1; |
| pd->last_carrier = -1; |
| |
| return 0; |
| } |
| |
| static int smsc9420_mii_init(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| int err = -ENXIO, i; |
| |
| pd->mii_bus = mdiobus_alloc(); |
| if (!pd->mii_bus) { |
| err = -ENOMEM; |
| goto err_out_1; |
| } |
| pd->mii_bus->name = DRV_MDIONAME; |
| snprintf(pd->mii_bus->id, MII_BUS_ID_SIZE, "%x", |
| (pd->pdev->bus->number << 8) | pd->pdev->devfn); |
| pd->mii_bus->priv = pd; |
| pd->mii_bus->read = smsc9420_mii_read; |
| pd->mii_bus->write = smsc9420_mii_write; |
| pd->mii_bus->irq = pd->phy_irq; |
| for (i = 0; i < PHY_MAX_ADDR; ++i) |
| pd->mii_bus->irq[i] = PHY_POLL; |
| |
| /* Mask all PHYs except ID 1 (internal) */ |
| pd->mii_bus->phy_mask = ~(1 << 1); |
| |
| if (mdiobus_register(pd->mii_bus)) { |
| smsc_warn(PROBE, "Error registering mii bus"); |
| goto err_out_free_bus_2; |
| } |
| |
| if (smsc9420_mii_probe(dev) < 0) { |
| smsc_warn(PROBE, "Error probing mii bus"); |
| goto err_out_unregister_bus_3; |
| } |
| |
| return 0; |
| |
| err_out_unregister_bus_3: |
| mdiobus_unregister(pd->mii_bus); |
| err_out_free_bus_2: |
| mdiobus_free(pd->mii_bus); |
| err_out_1: |
| return err; |
| } |
| |
| static int smsc9420_alloc_tx_ring(struct smsc9420_pdata *pd) |
| { |
| int i; |
| |
| BUG_ON(!pd->tx_ring); |
| |
| pd->tx_buffers = kmalloc((sizeof(struct smsc9420_ring_info) * |
| TX_RING_SIZE), GFP_KERNEL); |
| if (!pd->tx_buffers) { |
| smsc_warn(IFUP, "Failed to allocated tx_buffers"); |
| return -ENOMEM; |
| } |
| |
| /* Initialize the TX Ring */ |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| pd->tx_buffers[i].skb = NULL; |
| pd->tx_buffers[i].mapping = 0; |
| pd->tx_ring[i].status = 0; |
| pd->tx_ring[i].length = 0; |
| pd->tx_ring[i].buffer1 = 0; |
| pd->tx_ring[i].buffer2 = 0; |
| } |
| pd->tx_ring[TX_RING_SIZE - 1].length = TDES1_TER_; |
| wmb(); |
| |
| pd->tx_ring_head = 0; |
| pd->tx_ring_tail = 0; |
| |
| smsc9420_reg_write(pd, TX_BASE_ADDR, pd->tx_dma_addr); |
| smsc9420_pci_flush_write(pd); |
| |
| return 0; |
| } |
| |
| static int smsc9420_alloc_rx_ring(struct smsc9420_pdata *pd) |
| { |
| int i; |
| |
| BUG_ON(!pd->rx_ring); |
| |
| pd->rx_buffers = kmalloc((sizeof(struct smsc9420_ring_info) * |
| RX_RING_SIZE), GFP_KERNEL); |
| if (pd->rx_buffers == NULL) { |
| smsc_warn(IFUP, "Failed to allocated rx_buffers"); |
| goto out; |
| } |
| |
| /* initialize the rx ring */ |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| pd->rx_ring[i].status = 0; |
| pd->rx_ring[i].length = PKT_BUF_SZ; |
| pd->rx_ring[i].buffer2 = 0; |
| pd->rx_buffers[i].skb = NULL; |
| pd->rx_buffers[i].mapping = 0; |
| } |
| pd->rx_ring[RX_RING_SIZE - 1].length = (PKT_BUF_SZ | RDES1_RER_); |
| |
| /* now allocate the entire ring of skbs */ |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| if (smsc9420_alloc_rx_buffer(pd, i)) { |
| smsc_warn(IFUP, "failed to allocate rx skb %d", i); |
| goto out_free_rx_skbs; |
| } |
| } |
| |
| pd->rx_ring_head = 0; |
| pd->rx_ring_tail = 0; |
| |
| smsc9420_reg_write(pd, VLAN1, ETH_P_8021Q); |
| smsc_dbg(IFUP, "VLAN1 = 0x%08x", smsc9420_reg_read(pd, VLAN1)); |
| |
| if (pd->rx_csum) { |
| /* Enable RX COE */ |
| u32 coe = smsc9420_reg_read(pd, COE_CR) | RX_COE_EN; |
| smsc9420_reg_write(pd, COE_CR, coe); |
| smsc_dbg(IFUP, "COE_CR = 0x%08x", coe); |
| } |
| |
| smsc9420_reg_write(pd, RX_BASE_ADDR, pd->rx_dma_addr); |
| smsc9420_pci_flush_write(pd); |
| |
| return 0; |
| |
| out_free_rx_skbs: |
| smsc9420_free_rx_ring(pd); |
| out: |
| return -ENOMEM; |
| } |
| |
| static int smsc9420_open(struct net_device *dev) |
| { |
| struct smsc9420_pdata *pd; |
| u32 bus_mode, mac_cr, dmac_control, int_cfg, dma_intr_ena, int_ctl; |
| unsigned long flags; |
| int result = 0, timeout; |
| |
| BUG_ON(!dev); |
| pd = netdev_priv(dev); |
| BUG_ON(!pd); |
| |
| if (!is_valid_ether_addr(dev->dev_addr)) { |
| smsc_warn(IFUP, "dev_addr is not a valid MAC address"); |
| result = -EADDRNOTAVAIL; |
| goto out_0; |
| } |
| |
| netif_carrier_off(dev); |
| |
| /* disable, mask and acknowlege all interrupts */ |
| spin_lock_irqsave(&pd->int_lock, flags); |
| int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); |
| smsc9420_reg_write(pd, INT_CFG, int_cfg); |
| smsc9420_reg_write(pd, INT_CTL, 0); |
| spin_unlock_irqrestore(&pd->int_lock, flags); |
| smsc9420_reg_write(pd, DMAC_INTR_ENA, 0); |
| smsc9420_reg_write(pd, INT_STAT, 0xFFFFFFFF); |
| smsc9420_pci_flush_write(pd); |
| |
| if (request_irq(dev->irq, smsc9420_isr, IRQF_SHARED | IRQF_DISABLED, |
| DRV_NAME, pd)) { |
| smsc_warn(IFUP, "Unable to use IRQ = %d", dev->irq); |
| result = -ENODEV; |
| goto out_0; |
| } |
| |
| smsc9420_dmac_soft_reset(pd); |
| |
| /* make sure MAC_CR is sane */ |
| smsc9420_reg_write(pd, MAC_CR, 0); |
| |
| smsc9420_set_mac_address(dev); |
| |
| /* Configure GPIO pins to drive LEDs */ |
| smsc9420_reg_write(pd, GPIO_CFG, |
| (GPIO_CFG_LED_3_ | GPIO_CFG_LED_2_ | GPIO_CFG_LED_1_)); |
| |
| bus_mode = BUS_MODE_DMA_BURST_LENGTH_16; |
| |
| #ifdef __BIG_ENDIAN |
| bus_mode |= BUS_MODE_DBO_; |
| #endif |
| |
| smsc9420_reg_write(pd, BUS_MODE, bus_mode); |
| |
| smsc9420_pci_flush_write(pd); |
| |
| /* set bus master bridge arbitration priority for Rx and TX DMA */ |
| smsc9420_reg_write(pd, BUS_CFG, BUS_CFG_RXTXWEIGHT_4_1); |
| |
| smsc9420_reg_write(pd, DMAC_CONTROL, |
| (DMAC_CONTROL_SF_ | DMAC_CONTROL_OSF_)); |
| |
| smsc9420_pci_flush_write(pd); |
| |
| /* test the IRQ connection to the ISR */ |
| smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq); |
| pd->software_irq_signal = false; |
| |
| spin_lock_irqsave(&pd->int_lock, flags); |
| /* configure interrupt deassertion timer and enable interrupts */ |
| int_cfg = smsc9420_reg_read(pd, INT_CFG) | INT_CFG_IRQ_EN_; |
| int_cfg &= ~(INT_CFG_INT_DEAS_MASK); |
| int_cfg |= (INT_DEAS_TIME & INT_CFG_INT_DEAS_MASK); |
| smsc9420_reg_write(pd, INT_CFG, int_cfg); |
| |
| /* unmask software interrupt */ |
| int_ctl = smsc9420_reg_read(pd, INT_CTL) | INT_CTL_SW_INT_EN_; |
| smsc9420_reg_write(pd, INT_CTL, int_ctl); |
| spin_unlock_irqrestore(&pd->int_lock, flags); |
| smsc9420_pci_flush_write(pd); |
| |
| timeout = 1000; |
| while (timeout--) { |
| if (pd->software_irq_signal) |
| break; |
| msleep(1); |
| } |
| |
| /* disable interrupts */ |
| spin_lock_irqsave(&pd->int_lock, flags); |
| int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); |
| smsc9420_reg_write(pd, INT_CFG, int_cfg); |
| spin_unlock_irqrestore(&pd->int_lock, flags); |
| |
| if (!pd->software_irq_signal) { |
| smsc_warn(IFUP, "ISR failed signaling test"); |
| result = -ENODEV; |
| goto out_free_irq_1; |
| } |
| |
| smsc_dbg(IFUP, "ISR passed test using IRQ %d", dev->irq); |
| |
| result = smsc9420_alloc_tx_ring(pd); |
| if (result) { |
| smsc_warn(IFUP, "Failed to Initialize tx dma ring"); |
| result = -ENOMEM; |
| goto out_free_irq_1; |
| } |
| |
| result = smsc9420_alloc_rx_ring(pd); |
| if (result) { |
| smsc_warn(IFUP, "Failed to Initialize rx dma ring"); |
| result = -ENOMEM; |
| goto out_free_tx_ring_2; |
| } |
| |
| result = smsc9420_mii_init(dev); |
| if (result) { |
| smsc_warn(IFUP, "Failed to initialize Phy"); |
| result = -ENODEV; |
| goto out_free_rx_ring_3; |
| } |
| |
| /* Bring the PHY up */ |
| phy_start(pd->phy_dev); |
| |
| napi_enable(&pd->napi); |
| |
| /* start tx and rx */ |
| mac_cr = smsc9420_reg_read(pd, MAC_CR) | MAC_CR_TXEN_ | MAC_CR_RXEN_; |
| smsc9420_reg_write(pd, MAC_CR, mac_cr); |
| |
| dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL); |
| dmac_control |= DMAC_CONTROL_ST_ | DMAC_CONTROL_SR_; |
| smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control); |
| smsc9420_pci_flush_write(pd); |
| |
| dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); |
| dma_intr_ena |= |
| (DMAC_INTR_ENA_TX_ | DMAC_INTR_ENA_RX_ | DMAC_INTR_ENA_NIS_); |
| smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); |
| smsc9420_pci_flush_write(pd); |
| |
| netif_wake_queue(dev); |
| |
| smsc9420_reg_write(pd, RX_POLL_DEMAND, 1); |
| |
| /* enable interrupts */ |
| spin_lock_irqsave(&pd->int_lock, flags); |
| int_cfg = smsc9420_reg_read(pd, INT_CFG) | INT_CFG_IRQ_EN_; |
| smsc9420_reg_write(pd, INT_CFG, int_cfg); |
| spin_unlock_irqrestore(&pd->int_lock, flags); |
| |
| return 0; |
| |
| out_free_rx_ring_3: |
| smsc9420_free_rx_ring(pd); |
| out_free_tx_ring_2: |
| smsc9420_free_tx_ring(pd); |
| out_free_irq_1: |
| free_irq(dev->irq, pd); |
| out_0: |
| return result; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int smsc9420_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| u32 int_cfg; |
| ulong flags; |
| |
| /* disable interrupts */ |
| spin_lock_irqsave(&pd->int_lock, flags); |
| int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); |
| smsc9420_reg_write(pd, INT_CFG, int_cfg); |
| spin_unlock_irqrestore(&pd->int_lock, flags); |
| |
| if (netif_running(dev)) { |
| netif_tx_disable(dev); |
| smsc9420_stop_tx(pd); |
| smsc9420_free_tx_ring(pd); |
| |
| napi_disable(&pd->napi); |
| smsc9420_stop_rx(pd); |
| smsc9420_free_rx_ring(pd); |
| |
| free_irq(dev->irq, pd); |
| |
| netif_device_detach(dev); |
| } |
| |
| pci_save_state(pdev); |
| pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| |
| return 0; |
| } |
| |
| static int smsc9420_resume(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| struct smsc9420_pdata *pd = netdev_priv(dev); |
| int err; |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| err = pci_enable_device(pdev); |
| if (err) |
| return err; |
| |
| pci_set_master(pdev); |
| |
| err = pci_enable_wake(pdev, 0, 0); |
| if (err) |
| smsc_warn(IFUP, "pci_enable_wake failed: %d", err); |
| |
| if (netif_running(dev)) { |
| err = smsc9420_open(dev); |
| netif_device_attach(dev); |
| } |
| return err; |
| } |
| |
| #endif /* CONFIG_PM */ |
| |
| static const struct net_device_ops smsc9420_netdev_ops = { |
| .ndo_open = smsc9420_open, |
| .ndo_stop = smsc9420_stop, |
| .ndo_start_xmit = smsc9420_hard_start_xmit, |
| .ndo_get_stats = smsc9420_get_stats, |
| .ndo_set_multicast_list = smsc9420_set_multicast_list, |
| .ndo_do_ioctl = smsc9420_do_ioctl, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = eth_mac_addr, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = smsc9420_poll_controller, |
| #endif /* CONFIG_NET_POLL_CONTROLLER */ |
| }; |
| |
| static int __devinit |
| smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct net_device *dev; |
| struct smsc9420_pdata *pd; |
| void __iomem *virt_addr; |
| int result = 0; |
| u32 id_rev; |
| |
| printk(KERN_INFO DRV_DESCRIPTION " version " DRV_VERSION "\n"); |
| |
| /* First do the PCI initialisation */ |
| result = pci_enable_device(pdev); |
| if (unlikely(result)) { |
| printk(KERN_ERR "Cannot enable smsc9420\n"); |
| goto out_0; |
| } |
| |
| pci_set_master(pdev); |
| |
| dev = alloc_etherdev(sizeof(*pd)); |
| if (!dev) { |
| printk(KERN_ERR "ether device alloc failed\n"); |
| goto out_disable_pci_device_1; |
| } |
| |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| if (!(pci_resource_flags(pdev, SMSC_BAR) & IORESOURCE_MEM)) { |
| printk(KERN_ERR "Cannot find PCI device base address\n"); |
| goto out_free_netdev_2; |
| } |
| |
| if ((pci_request_regions(pdev, DRV_NAME))) { |
| printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n"); |
| goto out_free_netdev_2; |
| } |
| |
| if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { |
| printk(KERN_ERR "No usable DMA configuration, aborting.\n"); |
| goto out_free_regions_3; |
| } |
| |
| virt_addr = ioremap(pci_resource_start(pdev, SMSC_BAR), |
| pci_resource_len(pdev, SMSC_BAR)); |
| if (!virt_addr) { |
| printk(KERN_ERR "Cannot map device registers, aborting.\n"); |
| goto out_free_regions_3; |
| } |
| |
| /* registers are double mapped with 0 offset for LE and 0x200 for BE */ |
| virt_addr += LAN9420_CPSR_ENDIAN_OFFSET; |
| |
| dev->base_addr = (ulong)virt_addr; |
| |
| pd = netdev_priv(dev); |
| |
| /* pci descriptors are created in the PCI consistent area */ |
| pd->rx_ring = pci_alloc_consistent(pdev, |
| sizeof(struct smsc9420_dma_desc) * RX_RING_SIZE + |
| sizeof(struct smsc9420_dma_desc) * TX_RING_SIZE, |
| &pd->rx_dma_addr); |
| |
| if (!pd->rx_ring) |
| goto out_free_io_4; |
| |
| /* descriptors are aligned due to the nature of pci_alloc_consistent */ |
| pd->tx_ring = (struct smsc9420_dma_desc *) |
| (pd->rx_ring + RX_RING_SIZE); |
| pd->tx_dma_addr = pd->rx_dma_addr + |
| sizeof(struct smsc9420_dma_desc) * RX_RING_SIZE; |
| |
| pd->pdev = pdev; |
| pd->dev = dev; |
| pd->base_addr = virt_addr; |
| pd->msg_enable = smsc_debug; |
| pd->rx_csum = true; |
| |
| smsc_dbg(PROBE, "lan_base=0x%08lx", (ulong)virt_addr); |
| |
| id_rev = smsc9420_reg_read(pd, ID_REV); |
| switch (id_rev & 0xFFFF0000) { |
| case 0x94200000: |
| smsc_info(PROBE, "LAN9420 identified, ID_REV=0x%08X", id_rev); |
| break; |
| default: |
| smsc_warn(PROBE, "LAN9420 NOT identified"); |
| smsc_warn(PROBE, "ID_REV=0x%08X", id_rev); |
| goto out_free_dmadesc_5; |
| } |
| |
| smsc9420_dmac_soft_reset(pd); |
| smsc9420_eeprom_reload(pd); |
| smsc9420_check_mac_address(dev); |
| |
| dev->netdev_ops = &smsc9420_netdev_ops; |
| dev->ethtool_ops = &smsc9420_ethtool_ops; |
| dev->irq = pdev->irq; |
| |
| netif_napi_add(dev, &pd->napi, smsc9420_rx_poll, NAPI_WEIGHT); |
| |
| result = register_netdev(dev); |
| if (result) { |
| smsc_warn(PROBE, "error %i registering device", result); |
| goto out_free_dmadesc_5; |
| } |
| |
| pci_set_drvdata(pdev, dev); |
| |
| spin_lock_init(&pd->int_lock); |
| spin_lock_init(&pd->phy_lock); |
| |
| dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr); |
| |
| return 0; |
| |
| out_free_dmadesc_5: |
| pci_free_consistent(pdev, sizeof(struct smsc9420_dma_desc) * |
| (RX_RING_SIZE + TX_RING_SIZE), pd->rx_ring, pd->rx_dma_addr); |
| out_free_io_4: |
| iounmap(virt_addr - LAN9420_CPSR_ENDIAN_OFFSET); |
| out_free_regions_3: |
| pci_release_regions(pdev); |
| out_free_netdev_2: |
| free_netdev(dev); |
| out_disable_pci_device_1: |
| pci_disable_device(pdev); |
| out_0: |
| return -ENODEV; |
| } |
| |
| static void __devexit smsc9420_remove(struct pci_dev *pdev) |
| { |
| struct net_device *dev; |
| struct smsc9420_pdata *pd; |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return; |
| |
| pci_set_drvdata(pdev, NULL); |
| |
| pd = netdev_priv(dev); |
| unregister_netdev(dev); |
| |
| /* tx_buffers and rx_buffers are freed in stop */ |
| BUG_ON(pd->tx_buffers); |
| BUG_ON(pd->rx_buffers); |
| |
| BUG_ON(!pd->tx_ring); |
| BUG_ON(!pd->rx_ring); |
| |
| pci_free_consistent(pdev, sizeof(struct smsc9420_dma_desc) * |
| (RX_RING_SIZE + TX_RING_SIZE), pd->rx_ring, pd->rx_dma_addr); |
| |
| iounmap(pd->base_addr - LAN9420_CPSR_ENDIAN_OFFSET); |
| pci_release_regions(pdev); |
| free_netdev(dev); |
| pci_disable_device(pdev); |
| } |
| |
| static struct pci_driver smsc9420_driver = { |
| .name = DRV_NAME, |
| .id_table = smsc9420_id_table, |
| .probe = smsc9420_probe, |
| .remove = __devexit_p(smsc9420_remove), |
| #ifdef CONFIG_PM |
| .suspend = smsc9420_suspend, |
| .resume = smsc9420_resume, |
| #endif /* CONFIG_PM */ |
| }; |
| |
| static int __init smsc9420_init_module(void) |
| { |
| smsc_debug = netif_msg_init(debug, SMSC_MSG_DEFAULT); |
| |
| return pci_register_driver(&smsc9420_driver); |
| } |
| |
| static void __exit smsc9420_exit_module(void) |
| { |
| pci_unregister_driver(&smsc9420_driver); |
| } |
| |
| module_init(smsc9420_init_module); |
| module_exit(smsc9420_exit_module); |