Merge branch 'next/board-samsung-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/boards
From Kukjin Kim <kgene.kim@samsung.com>:
It is including several changes for samsung boards.
* 'next/board-samsung-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Add leds status1 and status2 on Origen board
ARM: S3C64XX: Mark most Cragganmore initdata devinitdata
ARM: EXYNOS: Add missing .reserve field to SMDKC210
ARM: EXYNOS: Add DRM device to SMDK4X12 board
ARM: S3C64XX: Clean up after SPI driver platform data updates
ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index e698ca0..b5b4c8c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -375,6 +375,7 @@
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_SYSMMU
select EXYNOS_DEV_DMA
+ select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 656f8fc..129c4c7 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1342,9 +1342,8 @@
static void __init nuri_map_io(void)
{
- clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 9ed0229..b6d9a88 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -9,6 +9,7 @@
*/
#include <linux/serial_core.h>
+#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
@@ -503,6 +504,34 @@
/* USB OTG */
static struct s3c_hsotg_plat origen_hsotg_pdata;
+static struct gpio_led origen_gpio_leds[] = {
+ {
+ .name = "origen::status1",
+ .default_trigger = "heartbeat",
+ .gpio = EXYNOS4_GPX1(3),
+ .active_low = 1,
+ },
+ {
+ .name = "origen::status2",
+ .default_trigger = "mmc0",
+ .gpio = EXYNOS4_GPX1(4),
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data origen_gpio_led_info = {
+ .leds = origen_gpio_leds,
+ .num_leds = ARRAY_SIZE(origen_gpio_leds),
+};
+
+static struct platform_device origen_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &origen_gpio_led_info,
+ },
+};
+
static struct gpio_keys_button origen_gpio_keys_table[] = {
{
.code = KEY_MENU,
@@ -682,6 +711,7 @@
&exynos4_device_ohci,
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
+ &origen_leds_gpio,
&origen_device_bluetooth,
};
@@ -717,7 +747,7 @@
static void __init origen_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
@@ -750,7 +780,6 @@
origen_ehci_init();
origen_ohci_init();
s3c_hsotg_set_platdata(&origen_hsotg_pdata);
- clk_xusbxti.rate = 24000000;
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index 2623f3b..b26beb1 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -41,6 +41,7 @@
#include <mach/map.h>
+#include <drm/exynos_drm.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -240,6 +241,26 @@
.cols = 8,
};
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+ .panel = {
+ .timing = {
+ .left_margin = 8,
+ .right_margin = 8,
+ .upper_margin = 6,
+ .lower_margin = 6,
+ .hsync_len = 6,
+ .vsync_len = 4,
+ .xres = 480,
+ .yres = 800,
+ },
+ },
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .default_win = 0,
+ .bpp = 32,
+};
+#else
static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
.xres = 480,
.yres = 800,
@@ -267,6 +288,7 @@
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
+#endif
/* USB OTG */
static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
@@ -290,13 +312,14 @@
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
+#ifdef CONFIG_DRM_EXYNOS
+ &exynos_device_drm,
+#endif
&samsung_device_keypad,
};
static void __init smdk4x12_map_io(void)
{
- clk_xusbxti.rate = 24000000;
-
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
@@ -334,7 +357,12 @@
s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
+#ifdef CONFIG_DRM_EXYNOS
+ s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+ exynos4_fimd0_gpio_setup_24bpp();
+#else
s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
+#endif
platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
}
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 7464a45..d5a172d 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -366,7 +366,7 @@
static void __init smdkv310_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
}
@@ -403,7 +403,6 @@
smdkv310_ehci_init();
smdkv310_ohci_init();
s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
- clk_xusbxti.rate = 24000000;
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
@@ -430,5 +429,6 @@
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
+ .reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index cd92fa8..e7ba7ec 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -1100,9 +1100,8 @@
static void __init universal_map_io(void)
{
- clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 4645aa1..9e382e7 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,7 +29,6 @@
#include <mach/crag6410.h>
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
- .set_level = gpio_set_value,
.line = S3C64XX_GPC(3),
};
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 161c3b6..7eb5865 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -171,7 +171,7 @@
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
+static struct s3c_fb_platdata crag6410_lcd_pdata __devinitdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &crag6410_lcd_timing,
.win[0] = &crag6410_fb_win0,
@@ -181,7 +181,7 @@
/* 2x6 keypad */
-static uint32_t crag6410_keymap[] __initdata = {
+static uint32_t crag6410_keymap[] __devinitdata = {
/* KEY(row, col, keycode) */
KEY(0, 0, KEY_VOLUMEUP),
KEY(0, 1, KEY_HOME),
@@ -197,12 +197,12 @@
KEY(1, 5, KEY_CAMERA),
};
-static struct matrix_keymap_data crag6410_keymap_data __initdata = {
+static struct matrix_keymap_data crag6410_keymap_data __devinitdata = {
.keymap = crag6410_keymap,
.keymap_size = ARRAY_SIZE(crag6410_keymap),
};
-static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
+static struct samsung_keypad_platdata crag6410_keypad_data __devinitdata = {
.keymap_data = &crag6410_keymap_data,
.rows = 2,
.cols = 6,
@@ -373,11 +373,11 @@
.dvs_gpio = S3C64XX_GPK(0),
};
-static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
+static struct regulator_consumer_supply vddarm_consumers[] __devinitdata = {
REGULATOR_SUPPLY("vddarm", NULL),
};
-static struct regulator_init_data vddarm __initdata = {
+static struct regulator_init_data vddarm __devinitdata = {
.constraints = {
.name = "VDDARM",
.min_uV = 1000000,
@@ -391,11 +391,11 @@
.driver_data = &vddarm_pdata,
};
-static struct regulator_consumer_supply vddint_consumers[] __initdata = {
+static struct regulator_consumer_supply vddint_consumers[] __devinitdata = {
REGULATOR_SUPPLY("vddint", NULL),
};
-static struct regulator_init_data vddint __initdata = {
+static struct regulator_init_data vddint __devinitdata = {
.constraints = {
.name = "VDDINT",
.min_uV = 1000000,
@@ -408,27 +408,27 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddmem __initdata = {
+static struct regulator_init_data vddmem __devinitdata = {
.constraints = {
.name = "VDDMEM",
.always_on = 1,
},
};
-static struct regulator_init_data vddsys __initdata = {
+static struct regulator_init_data vddsys __devinitdata = {
.constraints = {
.name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
.always_on = 1,
},
};
-static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
+static struct regulator_consumer_supply vddmmc_consumers[] __devinitdata = {
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
};
-static struct regulator_init_data vddmmc __initdata = {
+static struct regulator_init_data vddmmc __devinitdata = {
.constraints = {
.name = "VDDMMC,UH",
.always_on = 1,
@@ -438,7 +438,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddotgi __initdata = {
+static struct regulator_init_data vddotgi __devinitdata = {
.constraints = {
.name = "VDDOTGi",
.always_on = 1,
@@ -446,7 +446,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddotg __initdata = {
+static struct regulator_init_data vddotg __devinitdata = {
.constraints = {
.name = "VDDOTG",
.always_on = 1,
@@ -454,7 +454,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddhi __initdata = {
+static struct regulator_init_data vddhi __devinitdata = {
.constraints = {
.name = "VDDHI",
.always_on = 1,
@@ -462,7 +462,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddadc __initdata = {
+static struct regulator_init_data vddadc __devinitdata = {
.constraints = {
.name = "VDDADC,VDDDAC",
.always_on = 1,
@@ -470,7 +470,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddmem0 __initdata = {
+static struct regulator_init_data vddmem0 __devinitdata = {
.constraints = {
.name = "VDDMEM0",
.always_on = 1,
@@ -478,7 +478,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddpll __initdata = {
+static struct regulator_init_data vddpll __devinitdata = {
.constraints = {
.name = "VDDPLL",
.always_on = 1,
@@ -486,7 +486,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddlcd __initdata = {
+static struct regulator_init_data vddlcd __devinitdata = {
.constraints = {
.name = "VDDLCD",
.always_on = 1,
@@ -494,7 +494,7 @@
.supply_regulator = "WALLVDD",
};
-static struct regulator_init_data vddalive __initdata = {
+static struct regulator_init_data vddalive __devinitdata = {
.constraints = {
.name = "VDDALIVE",
.always_on = 1,
@@ -502,28 +502,28 @@
.supply_regulator = "WALLVDD",
};
-static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+static struct wm831x_backup_pdata banff_backup_pdata __devinitdata = {
.charger_enable = 1,
.vlim = 2500, /* mV */
.ilim = 200, /* uA */
};
-static struct wm831x_status_pdata banff_red_led __initdata = {
+static struct wm831x_status_pdata banff_red_led __devinitdata = {
.name = "banff:red:",
.default_src = WM831X_STATUS_MANUAL,
};
-static struct wm831x_status_pdata banff_green_led __initdata = {
+static struct wm831x_status_pdata banff_green_led __devinitdata = {
.name = "banff:green:",
.default_src = WM831X_STATUS_MANUAL,
};
-static struct wm831x_touch_pdata touch_pdata __initdata = {
+static struct wm831x_touch_pdata touch_pdata __devinitdata = {
.data_irq = S3C_EINT(26),
.pd_irq = S3C_EINT(27),
};
-static struct wm831x_pdata crag_pmic_pdata __initdata = {
+static struct wm831x_pdata crag_pmic_pdata __devinitdata = {
.wm831x_num = 1,
.gpio_base = BANFF_PMIC_GPIO_BASE,
.soft_shutdown = true,
@@ -567,7 +567,7 @@
.touch = &touch_pdata,
};
-static struct i2c_board_info i2c_devs0[] __initdata = {
+static struct i2c_board_info i2c_devs0[] __devinitdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("tca6408", 0x20),
.platform_data = &crag6410_pca_data,
@@ -582,12 +582,12 @@
.frequency = 400000,
};
-static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = {
REGULATOR_SUPPLY("DCVDD", "spi0.0"),
REGULATOR_SUPPLY("AVDD", "spi0.0"),
};
-static struct regulator_init_data pvdd_1v2 __initdata = {
+static struct regulator_init_data pvdd_1v2 __devinitdata = {
.constraints = {
.name = "PVDD_1V2",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -597,7 +597,7 @@
.num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
};
-static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = {
REGULATOR_SUPPLY("LDOVDD", "1-001a"),
REGULATOR_SUPPLY("PLLVDD", "1-001a"),
REGULATOR_SUPPLY("DBVDD", "1-001a"),
@@ -611,7 +611,7 @@
REGULATOR_SUPPLY("DBVDD", "spi0.0"),
};
-static struct regulator_init_data pvdd_1v8 __initdata = {
+static struct regulator_init_data pvdd_1v8 __devinitdata = {
.constraints = {
.name = "PVDD_1V8",
.always_on = 1,
@@ -621,12 +621,12 @@
.num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
};
-static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_3v3_consumers[] __devinitdata = {
REGULATOR_SUPPLY("MICVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD1", "1-001a"),
};
-static struct regulator_init_data pvdd_3v3 __initdata = {
+static struct regulator_init_data pvdd_3v3 __devinitdata = {
.constraints = {
.name = "PVDD_3V3",
.always_on = 1,
@@ -636,7 +636,7 @@
.num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
};
-static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
+static struct wm831x_pdata glenfarclas_pmic_pdata __devinitdata = {
.wm831x_num = 2,
.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
@@ -668,7 +668,7 @@
},
};
-static struct i2c_board_info i2c_devs1[] __initdata = {
+static struct i2c_board_info i2c_devs1[] __devinitdata = {
{ I2C_BOARD_INFO("wm8311", 0x34),
.irq = S3C_EINT(0),
.platform_data = &glenfarclas_pmic_pdata },
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index b2cae13..822a559 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -908,7 +908,7 @@
static void __init goni_map_io(void)
{
s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
@@ -966,8 +966,6 @@
/* KEYPAD */
samsung_keypad_set_platdata(&keypad_data);
- clk_xusbxti.rate = 24000000;
-
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index c8997bc..918b23d 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -285,7 +285,7 @@
static void __init smdkv210_map_io(void)
{
s5pv210_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
@@ -321,7 +321,6 @@
samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
- clk_xusbxti.rate = 24000000;
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}