| #ifndef _LINUX_VHOST_H |
| #define _LINUX_VHOST_H |
| /* Userspace interface for in-kernel virtio accelerators. */ |
| |
| /* vhost is used to reduce the number of system calls involved in virtio. |
| * |
| * Existing virtio net code is used in the guest without modification. |
| * |
| * This header includes interface used by userspace hypervisor for |
| * device configuration. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/compiler.h> |
| #include <linux/ioctl.h> |
| #include <linux/virtio_config.h> |
| #include <linux/virtio_ring.h> |
| |
| struct vhost_vring_state { |
| unsigned int index; |
| unsigned int num; |
| }; |
| |
| struct vhost_vring_file { |
| unsigned int index; |
| int fd; /* Pass -1 to unbind from file. */ |
| |
| }; |
| |
| struct vhost_vring_addr { |
| unsigned int index; |
| /* Option flags. */ |
| unsigned int flags; |
| /* Flag values: */ |
| /* Whether log address is valid. If set enables logging. */ |
| #define VHOST_VRING_F_LOG 0 |
| |
| /* Start of array of descriptors (virtually contiguous) */ |
| __u64 desc_user_addr; |
| /* Used structure address. Must be 32 bit aligned */ |
| __u64 used_user_addr; |
| /* Available structure address. Must be 16 bit aligned */ |
| __u64 avail_user_addr; |
| /* Logging support. */ |
| /* Log writes to used structure, at offset calculated from specified |
| * address. Address must be 32 bit aligned. */ |
| __u64 log_guest_addr; |
| }; |
| |
| /* no alignment requirement */ |
| struct vhost_iotlb_msg { |
| __u64 iova; |
| __u64 size; |
| __u64 uaddr; |
| #define VHOST_ACCESS_RO 0x1 |
| #define VHOST_ACCESS_WO 0x2 |
| #define VHOST_ACCESS_RW 0x3 |
| __u8 perm; |
| #define VHOST_IOTLB_MISS 1 |
| #define VHOST_IOTLB_UPDATE 2 |
| #define VHOST_IOTLB_INVALIDATE 3 |
| #define VHOST_IOTLB_ACCESS_FAIL 4 |
| __u8 type; |
| }; |
| |
| #define VHOST_IOTLB_MSG 0x1 |
| |
| struct vhost_msg { |
| int type; |
| union { |
| struct vhost_iotlb_msg iotlb; |
| __u8 padding[64]; |
| }; |
| }; |
| |
| struct vhost_memory_region { |
| __u64 guest_phys_addr; |
| __u64 memory_size; /* bytes */ |
| __u64 userspace_addr; |
| __u64 flags_padding; /* No flags are currently specified. */ |
| }; |
| |
| /* All region addresses and sizes must be 4K aligned. */ |
| #define VHOST_PAGE_SIZE 0x1000 |
| |
| struct vhost_memory { |
| __u32 nregions; |
| __u32 padding; |
| struct vhost_memory_region regions[0]; |
| }; |
| |
| /* ioctls */ |
| |
| #define VHOST_VIRTIO 0xAF |
| |
| /* Features bitmask for forward compatibility. Transport bits are used for |
| * vhost specific features. */ |
| #define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64) |
| #define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64) |
| |
| /* Set current process as the (exclusive) owner of this file descriptor. This |
| * must be called before any other vhost command. Further calls to |
| * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */ |
| #define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01) |
| /* Give up ownership, and reset the device to default values. |
| * Allows subsequent call to VHOST_OWNER_SET to succeed. */ |
| #define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02) |
| |
| /* Set up/modify memory layout */ |
| #define VHOST_SET_MEM_TABLE _IOW(VHOST_VIRTIO, 0x03, struct vhost_memory) |
| |
| /* Write logging setup. */ |
| /* Memory writes can optionally be logged by setting bit at an offset |
| * (calculated from the physical address) from specified log base. |
| * The bit is set using an atomic 32 bit operation. */ |
| /* Set base address for logging. */ |
| #define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64) |
| /* Specify an eventfd file descriptor to signal on log write. */ |
| #define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int) |
| |
| /* Ring setup. */ |
| /* Set number of descriptors in ring. This parameter can not |
| * be modified while ring is running (bound to a device). */ |
| #define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state) |
| /* Set addresses for the ring. */ |
| #define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr) |
| /* Base value where queue looks for available descriptors */ |
| #define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state) |
| /* Get accessor: reads index, writes value in num */ |
| #define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state) |
| |
| /* Set the vring byte order in num. Valid values are VHOST_VRING_LITTLE_ENDIAN |
| * or VHOST_VRING_BIG_ENDIAN (other values return -EINVAL). |
| * The byte order cannot be changed while the device is active: trying to do so |
| * returns -EBUSY. |
| * This is a legacy only API that is simply ignored when VIRTIO_F_VERSION_1 is |
| * set. |
| * Not all kernel configurations support this ioctl, but all configurations that |
| * support SET also support GET. |
| */ |
| #define VHOST_VRING_LITTLE_ENDIAN 0 |
| #define VHOST_VRING_BIG_ENDIAN 1 |
| #define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state) |
| #define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state) |
| |
| /* The following ioctls use eventfd file descriptors to signal and poll |
| * for events. */ |
| |
| /* Set eventfd to poll for added buffers */ |
| #define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file) |
| /* Set eventfd to signal when buffers have beed used */ |
| #define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file) |
| /* Set eventfd to signal an error */ |
| #define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file) |
| /* Set busy loop timeout (in us) */ |
| #define VHOST_SET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x23, \ |
| struct vhost_vring_state) |
| /* Get busy loop timeout (in us) */ |
| #define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24, \ |
| struct vhost_vring_state) |
| |
| /* VHOST_NET specific defines */ |
| |
| /* Attach virtio net ring to a raw socket, or tap device. |
| * The socket must be already bound to an ethernet device, this device will be |
| * used for transmit. Pass fd -1 to unbind from the socket and the transmit |
| * device. This can be used to stop the ring (e.g. for migration). */ |
| #define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file) |
| |
| /* Feature bits */ |
| /* Log all write descriptors. Can be changed while device is active. */ |
| #define VHOST_F_LOG_ALL 26 |
| /* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */ |
| #define VHOST_NET_F_VIRTIO_NET_HDR 27 |
| |
| /* VHOST_SCSI specific definitions */ |
| |
| /* |
| * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. |
| * |
| * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + |
| * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage |
| * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target. |
| * All the targets under vhost_wwpn can be seen and used by guset. |
| */ |
| |
| #define VHOST_SCSI_ABI_VERSION 1 |
| |
| struct vhost_scsi_target { |
| int abi_version; |
| char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */ |
| unsigned short vhost_tpgt; |
| unsigned short reserved; |
| }; |
| |
| #define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) |
| #define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) |
| /* Changing this breaks userspace. */ |
| #define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) |
| /* Set and get the events missed flag */ |
| #define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32) |
| #define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32) |
| |
| /* VHOST_VSOCK specific defines */ |
| |
| #define VHOST_VSOCK_SET_GUEST_CID _IOW(VHOST_VIRTIO, 0x60, __u64) |
| #define VHOST_VSOCK_SET_RUNNING _IOW(VHOST_VIRTIO, 0x61, int) |
| |
| #endif |