| /* |
| * wm8983.c -- WM8983 ALSA SoC Audio driver |
| * |
| * Copyright 2011 Wolfson Microelectronics plc |
| * |
| * Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/spi/spi.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| |
| #include "wm8983.h" |
| |
| static const struct reg_default wm8983_defaults[] = { |
| { 0x01, 0x0000 }, /* R1 - Power management 1 */ |
| { 0x02, 0x0000 }, /* R2 - Power management 2 */ |
| { 0x03, 0x0000 }, /* R3 - Power management 3 */ |
| { 0x04, 0x0050 }, /* R4 - Audio Interface */ |
| { 0x05, 0x0000 }, /* R5 - Companding control */ |
| { 0x06, 0x0140 }, /* R6 - Clock Gen control */ |
| { 0x07, 0x0000 }, /* R7 - Additional control */ |
| { 0x08, 0x0000 }, /* R8 - GPIO Control */ |
| { 0x09, 0x0000 }, /* R9 - Jack Detect Control 1 */ |
| { 0x0A, 0x0000 }, /* R10 - DAC Control */ |
| { 0x0B, 0x00FF }, /* R11 - Left DAC digital Vol */ |
| { 0x0C, 0x00FF }, /* R12 - Right DAC digital vol */ |
| { 0x0D, 0x0000 }, /* R13 - Jack Detect Control 2 */ |
| { 0x0E, 0x0100 }, /* R14 - ADC Control */ |
| { 0x0F, 0x00FF }, /* R15 - Left ADC Digital Vol */ |
| { 0x10, 0x00FF }, /* R16 - Right ADC Digital Vol */ |
| { 0x12, 0x012C }, /* R18 - EQ1 - low shelf */ |
| { 0x13, 0x002C }, /* R19 - EQ2 - peak 1 */ |
| { 0x14, 0x002C }, /* R20 - EQ3 - peak 2 */ |
| { 0x15, 0x002C }, /* R21 - EQ4 - peak 3 */ |
| { 0x16, 0x002C }, /* R22 - EQ5 - high shelf */ |
| { 0x18, 0x0032 }, /* R24 - DAC Limiter 1 */ |
| { 0x19, 0x0000 }, /* R25 - DAC Limiter 2 */ |
| { 0x1B, 0x0000 }, /* R27 - Notch Filter 1 */ |
| { 0x1C, 0x0000 }, /* R28 - Notch Filter 2 */ |
| { 0x1D, 0x0000 }, /* R29 - Notch Filter 3 */ |
| { 0x1E, 0x0000 }, /* R30 - Notch Filter 4 */ |
| { 0x20, 0x0038 }, /* R32 - ALC control 1 */ |
| { 0x21, 0x000B }, /* R33 - ALC control 2 */ |
| { 0x22, 0x0032 }, /* R34 - ALC control 3 */ |
| { 0x23, 0x0000 }, /* R35 - Noise Gate */ |
| { 0x24, 0x0008 }, /* R36 - PLL N */ |
| { 0x25, 0x000C }, /* R37 - PLL K 1 */ |
| { 0x26, 0x0093 }, /* R38 - PLL K 2 */ |
| { 0x27, 0x00E9 }, /* R39 - PLL K 3 */ |
| { 0x29, 0x0000 }, /* R41 - 3D control */ |
| { 0x2A, 0x0000 }, /* R42 - OUT4 to ADC */ |
| { 0x2B, 0x0000 }, /* R43 - Beep control */ |
| { 0x2C, 0x0033 }, /* R44 - Input ctrl */ |
| { 0x2D, 0x0010 }, /* R45 - Left INP PGA gain ctrl */ |
| { 0x2E, 0x0010 }, /* R46 - Right INP PGA gain ctrl */ |
| { 0x2F, 0x0100 }, /* R47 - Left ADC BOOST ctrl */ |
| { 0x30, 0x0100 }, /* R48 - Right ADC BOOST ctrl */ |
| { 0x31, 0x0002 }, /* R49 - Output ctrl */ |
| { 0x32, 0x0001 }, /* R50 - Left mixer ctrl */ |
| { 0x33, 0x0001 }, /* R51 - Right mixer ctrl */ |
| { 0x34, 0x0039 }, /* R52 - LOUT1 (HP) volume ctrl */ |
| { 0x35, 0x0039 }, /* R53 - ROUT1 (HP) volume ctrl */ |
| { 0x36, 0x0039 }, /* R54 - LOUT2 (SPK) volume ctrl */ |
| { 0x37, 0x0039 }, /* R55 - ROUT2 (SPK) volume ctrl */ |
| { 0x38, 0x0001 }, /* R56 - OUT3 mixer ctrl */ |
| { 0x39, 0x0001 }, /* R57 - OUT4 (MONO) mix ctrl */ |
| { 0x3D, 0x0000 }, /* R61 - BIAS CTRL */ |
| }; |
| |
| /* vol/gain update regs */ |
| static const int vol_update_regs[] = { |
| WM8983_LEFT_DAC_DIGITAL_VOL, |
| WM8983_RIGHT_DAC_DIGITAL_VOL, |
| WM8983_LEFT_ADC_DIGITAL_VOL, |
| WM8983_RIGHT_ADC_DIGITAL_VOL, |
| WM8983_LOUT1_HP_VOLUME_CTRL, |
| WM8983_ROUT1_HP_VOLUME_CTRL, |
| WM8983_LOUT2_SPK_VOLUME_CTRL, |
| WM8983_ROUT2_SPK_VOLUME_CTRL, |
| WM8983_LEFT_INP_PGA_GAIN_CTRL, |
| WM8983_RIGHT_INP_PGA_GAIN_CTRL |
| }; |
| |
| struct wm8983_priv { |
| struct regmap *regmap; |
| u32 sysclk; |
| u32 bclk; |
| }; |
| |
| static const struct { |
| int div; |
| int ratio; |
| } fs_ratios[] = { |
| { 10, 128 }, |
| { 15, 192 }, |
| { 20, 256 }, |
| { 30, 384 }, |
| { 40, 512 }, |
| { 60, 768 }, |
| { 80, 1024 }, |
| { 120, 1536 } |
| }; |
| |
| static const int srates[] = { 48000, 32000, 24000, 16000, 12000, 8000 }; |
| |
| static const int bclk_divs[] = { |
| 1, 2, 4, 8, 16, 32 |
| }; |
| |
| static int eqmode_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol); |
| static int eqmode_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol); |
| |
| static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1); |
| static const DECLARE_TLV_DB_SCALE(adc_tlv, -12700, 50, 1); |
| static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); |
| static const DECLARE_TLV_DB_SCALE(lim_thresh_tlv, -600, 100, 0); |
| static const DECLARE_TLV_DB_SCALE(lim_boost_tlv, 0, 100, 0); |
| static const DECLARE_TLV_DB_SCALE(alc_min_tlv, -1200, 600, 0); |
| static const DECLARE_TLV_DB_SCALE(alc_max_tlv, -675, 600, 0); |
| static const DECLARE_TLV_DB_SCALE(alc_tar_tlv, -2250, 150, 0); |
| static const DECLARE_TLV_DB_SCALE(pga_vol_tlv, -1200, 75, 0); |
| static const DECLARE_TLV_DB_SCALE(boost_tlv, -1200, 300, 1); |
| static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); |
| static const DECLARE_TLV_DB_SCALE(aux_tlv, -1500, 300, 0); |
| static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0); |
| static const DECLARE_TLV_DB_SCALE(pga_boost_tlv, 0, 2000, 0); |
| |
| static const char *alc_sel_text[] = { "Off", "Right", "Left", "Stereo" }; |
| static SOC_ENUM_SINGLE_DECL(alc_sel, WM8983_ALC_CONTROL_1, 7, alc_sel_text); |
| |
| static const char *alc_mode_text[] = { "ALC", "Limiter" }; |
| static SOC_ENUM_SINGLE_DECL(alc_mode, WM8983_ALC_CONTROL_3, 8, alc_mode_text); |
| |
| static const char *filter_mode_text[] = { "Audio", "Application" }; |
| static SOC_ENUM_SINGLE_DECL(filter_mode, WM8983_ADC_CONTROL, 7, |
| filter_mode_text); |
| |
| static const char *eq_bw_text[] = { "Narrow", "Wide" }; |
| static const char *eqmode_text[] = { "Capture", "Playback" }; |
| static SOC_ENUM_SINGLE_EXT_DECL(eqmode, eqmode_text); |
| |
| static const char *eq1_cutoff_text[] = { |
| "80Hz", "105Hz", "135Hz", "175Hz" |
| }; |
| static SOC_ENUM_SINGLE_DECL(eq1_cutoff, WM8983_EQ1_LOW_SHELF, 5, |
| eq1_cutoff_text); |
| static const char *eq2_cutoff_text[] = { |
| "230Hz", "300Hz", "385Hz", "500Hz" |
| }; |
| static SOC_ENUM_SINGLE_DECL(eq2_bw, WM8983_EQ2_PEAK_1, 8, eq_bw_text); |
| static SOC_ENUM_SINGLE_DECL(eq2_cutoff, WM8983_EQ2_PEAK_1, 5, eq2_cutoff_text); |
| static const char *eq3_cutoff_text[] = { |
| "650Hz", "850Hz", "1.1kHz", "1.4kHz" |
| }; |
| static SOC_ENUM_SINGLE_DECL(eq3_bw, WM8983_EQ3_PEAK_2, 8, eq_bw_text); |
| static SOC_ENUM_SINGLE_DECL(eq3_cutoff, WM8983_EQ3_PEAK_2, 5, eq3_cutoff_text); |
| static const char *eq4_cutoff_text[] = { |
| "1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz" |
| }; |
| static SOC_ENUM_SINGLE_DECL(eq4_bw, WM8983_EQ4_PEAK_3, 8, eq_bw_text); |
| static SOC_ENUM_SINGLE_DECL(eq4_cutoff, WM8983_EQ4_PEAK_3, 5, eq4_cutoff_text); |
| static const char *eq5_cutoff_text[] = { |
| "5.3kHz", "6.9kHz", "9kHz", "11.7kHz" |
| }; |
| static SOC_ENUM_SINGLE_DECL(eq5_cutoff, WM8983_EQ5_HIGH_SHELF, 5, |
| eq5_cutoff_text); |
| |
| static const char *depth_3d_text[] = { |
| "Off", |
| "6.67%", |
| "13.3%", |
| "20%", |
| "26.7%", |
| "33.3%", |
| "40%", |
| "46.6%", |
| "53.3%", |
| "60%", |
| "66.7%", |
| "73.3%", |
| "80%", |
| "86.7%", |
| "93.3%", |
| "100%" |
| }; |
| static SOC_ENUM_SINGLE_DECL(depth_3d, WM8983_3D_CONTROL, 0, |
| depth_3d_text); |
| |
| static const struct snd_kcontrol_new wm8983_snd_controls[] = { |
| SOC_SINGLE("Digital Loopback Switch", WM8983_COMPANDING_CONTROL, |
| 0, 1, 0), |
| |
| SOC_ENUM("ALC Capture Function", alc_sel), |
| SOC_SINGLE_TLV("ALC Capture Max Volume", WM8983_ALC_CONTROL_1, |
| 3, 7, 0, alc_max_tlv), |
| SOC_SINGLE_TLV("ALC Capture Min Volume", WM8983_ALC_CONTROL_1, |
| 0, 7, 0, alc_min_tlv), |
| SOC_SINGLE_TLV("ALC Capture Target Volume", WM8983_ALC_CONTROL_2, |
| 0, 15, 0, alc_tar_tlv), |
| SOC_SINGLE("ALC Capture Attack", WM8983_ALC_CONTROL_3, 0, 10, 0), |
| SOC_SINGLE("ALC Capture Hold", WM8983_ALC_CONTROL_2, 4, 10, 0), |
| SOC_SINGLE("ALC Capture Decay", WM8983_ALC_CONTROL_3, 4, 10, 0), |
| SOC_ENUM("ALC Mode", alc_mode), |
| SOC_SINGLE("ALC Capture NG Switch", WM8983_NOISE_GATE, |
| 3, 1, 0), |
| SOC_SINGLE("ALC Capture NG Threshold", WM8983_NOISE_GATE, |
| 0, 7, 1), |
| |
| SOC_DOUBLE_R_TLV("Capture Volume", WM8983_LEFT_ADC_DIGITAL_VOL, |
| WM8983_RIGHT_ADC_DIGITAL_VOL, 0, 255, 0, adc_tlv), |
| SOC_DOUBLE_R("Capture PGA ZC Switch", WM8983_LEFT_INP_PGA_GAIN_CTRL, |
| WM8983_RIGHT_INP_PGA_GAIN_CTRL, 7, 1, 0), |
| SOC_DOUBLE_R_TLV("Capture PGA Volume", WM8983_LEFT_INP_PGA_GAIN_CTRL, |
| WM8983_RIGHT_INP_PGA_GAIN_CTRL, 0, 63, 0, pga_vol_tlv), |
| |
| SOC_DOUBLE_R_TLV("Capture PGA Boost Volume", |
| WM8983_LEFT_ADC_BOOST_CTRL, WM8983_RIGHT_ADC_BOOST_CTRL, |
| 8, 1, 0, pga_boost_tlv), |
| |
| SOC_DOUBLE("ADC Inversion Switch", WM8983_ADC_CONTROL, 0, 1, 1, 0), |
| SOC_SINGLE("ADC 128x Oversampling Switch", WM8983_ADC_CONTROL, 8, 1, 0), |
| |
| SOC_DOUBLE_R_TLV("Playback Volume", WM8983_LEFT_DAC_DIGITAL_VOL, |
| WM8983_RIGHT_DAC_DIGITAL_VOL, 0, 255, 0, dac_tlv), |
| |
| SOC_SINGLE("DAC Playback Limiter Switch", WM8983_DAC_LIMITER_1, 8, 1, 0), |
| SOC_SINGLE("DAC Playback Limiter Decay", WM8983_DAC_LIMITER_1, 4, 10, 0), |
| SOC_SINGLE("DAC Playback Limiter Attack", WM8983_DAC_LIMITER_1, 0, 11, 0), |
| SOC_SINGLE_TLV("DAC Playback Limiter Threshold", WM8983_DAC_LIMITER_2, |
| 4, 7, 1, lim_thresh_tlv), |
| SOC_SINGLE_TLV("DAC Playback Limiter Boost Volume", WM8983_DAC_LIMITER_2, |
| 0, 12, 0, lim_boost_tlv), |
| SOC_DOUBLE("DAC Inversion Switch", WM8983_DAC_CONTROL, 0, 1, 1, 0), |
| SOC_SINGLE("DAC Auto Mute Switch", WM8983_DAC_CONTROL, 2, 1, 0), |
| SOC_SINGLE("DAC 128x Oversampling Switch", WM8983_DAC_CONTROL, 3, 1, 0), |
| |
| SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8983_LOUT1_HP_VOLUME_CTRL, |
| WM8983_ROUT1_HP_VOLUME_CTRL, 0, 63, 0, out_tlv), |
| SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8983_LOUT1_HP_VOLUME_CTRL, |
| WM8983_ROUT1_HP_VOLUME_CTRL, 7, 1, 0), |
| SOC_DOUBLE_R("Headphone Switch", WM8983_LOUT1_HP_VOLUME_CTRL, |
| WM8983_ROUT1_HP_VOLUME_CTRL, 6, 1, 1), |
| |
| SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8983_LOUT2_SPK_VOLUME_CTRL, |
| WM8983_ROUT2_SPK_VOLUME_CTRL, 0, 63, 0, out_tlv), |
| SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8983_LOUT2_SPK_VOLUME_CTRL, |
| WM8983_ROUT2_SPK_VOLUME_CTRL, 7, 1, 0), |
| SOC_DOUBLE_R("Speaker Switch", WM8983_LOUT2_SPK_VOLUME_CTRL, |
| WM8983_ROUT2_SPK_VOLUME_CTRL, 6, 1, 1), |
| |
| SOC_SINGLE("OUT3 Switch", WM8983_OUT3_MIXER_CTRL, |
| 6, 1, 1), |
| |
| SOC_SINGLE("OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL, |
| 6, 1, 1), |
| |
| SOC_SINGLE("High Pass Filter Switch", WM8983_ADC_CONTROL, 8, 1, 0), |
| SOC_ENUM("High Pass Filter Mode", filter_mode), |
| SOC_SINGLE("High Pass Filter Cutoff", WM8983_ADC_CONTROL, 4, 7, 0), |
| |
| SOC_DOUBLE_R_TLV("Aux Bypass Volume", |
| WM8983_LEFT_MIXER_CTRL, WM8983_RIGHT_MIXER_CTRL, 6, 7, 0, |
| aux_tlv), |
| |
| SOC_DOUBLE_R_TLV("Input PGA Bypass Volume", |
| WM8983_LEFT_MIXER_CTRL, WM8983_RIGHT_MIXER_CTRL, 2, 7, 0, |
| bypass_tlv), |
| |
| SOC_ENUM_EXT("Equalizer Function", eqmode, eqmode_get, eqmode_put), |
| SOC_ENUM("EQ1 Cutoff", eq1_cutoff), |
| SOC_SINGLE_TLV("EQ1 Volume", WM8983_EQ1_LOW_SHELF, 0, 24, 1, eq_tlv), |
| SOC_ENUM("EQ2 Bandwidth", eq2_bw), |
| SOC_ENUM("EQ2 Cutoff", eq2_cutoff), |
| SOC_SINGLE_TLV("EQ2 Volume", WM8983_EQ2_PEAK_1, 0, 24, 1, eq_tlv), |
| SOC_ENUM("EQ3 Bandwidth", eq3_bw), |
| SOC_ENUM("EQ3 Cutoff", eq3_cutoff), |
| SOC_SINGLE_TLV("EQ3 Volume", WM8983_EQ3_PEAK_2, 0, 24, 1, eq_tlv), |
| SOC_ENUM("EQ4 Bandwidth", eq4_bw), |
| SOC_ENUM("EQ4 Cutoff", eq4_cutoff), |
| SOC_SINGLE_TLV("EQ4 Volume", WM8983_EQ4_PEAK_3, 0, 24, 1, eq_tlv), |
| SOC_ENUM("EQ5 Cutoff", eq5_cutoff), |
| SOC_SINGLE_TLV("EQ5 Volume", WM8983_EQ5_HIGH_SHELF, 0, 24, 1, eq_tlv), |
| |
| SOC_ENUM("3D Depth", depth_3d), |
| }; |
| |
| static const struct snd_kcontrol_new left_out_mixer[] = { |
| SOC_DAPM_SINGLE("Line Switch", WM8983_LEFT_MIXER_CTRL, 1, 1, 0), |
| SOC_DAPM_SINGLE("Aux Switch", WM8983_LEFT_MIXER_CTRL, 5, 1, 0), |
| SOC_DAPM_SINGLE("PCM Switch", WM8983_LEFT_MIXER_CTRL, 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new right_out_mixer[] = { |
| SOC_DAPM_SINGLE("Line Switch", WM8983_RIGHT_MIXER_CTRL, 1, 1, 0), |
| SOC_DAPM_SINGLE("Aux Switch", WM8983_RIGHT_MIXER_CTRL, 5, 1, 0), |
| SOC_DAPM_SINGLE("PCM Switch", WM8983_RIGHT_MIXER_CTRL, 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new left_input_mixer[] = { |
| SOC_DAPM_SINGLE("L2 Switch", WM8983_INPUT_CTRL, 2, 1, 0), |
| SOC_DAPM_SINGLE("MicN Switch", WM8983_INPUT_CTRL, 1, 1, 0), |
| SOC_DAPM_SINGLE("MicP Switch", WM8983_INPUT_CTRL, 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new right_input_mixer[] = { |
| SOC_DAPM_SINGLE("R2 Switch", WM8983_INPUT_CTRL, 6, 1, 0), |
| SOC_DAPM_SINGLE("MicN Switch", WM8983_INPUT_CTRL, 5, 1, 0), |
| SOC_DAPM_SINGLE("MicP Switch", WM8983_INPUT_CTRL, 4, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new left_boost_mixer[] = { |
| SOC_DAPM_SINGLE_TLV("L2 Volume", WM8983_LEFT_ADC_BOOST_CTRL, |
| 4, 7, 0, boost_tlv), |
| SOC_DAPM_SINGLE_TLV("AUXL Volume", WM8983_LEFT_ADC_BOOST_CTRL, |
| 0, 7, 0, boost_tlv) |
| }; |
| |
| static const struct snd_kcontrol_new out3_mixer[] = { |
| SOC_DAPM_SINGLE("LMIX2OUT3 Switch", WM8983_OUT3_MIXER_CTRL, |
| 1, 1, 0), |
| SOC_DAPM_SINGLE("LDAC2OUT3 Switch", WM8983_OUT3_MIXER_CTRL, |
| 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new out4_mixer[] = { |
| SOC_DAPM_SINGLE("LMIX2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL, |
| 4, 1, 0), |
| SOC_DAPM_SINGLE("RMIX2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL, |
| 1, 1, 0), |
| SOC_DAPM_SINGLE("LDAC2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL, |
| 3, 1, 0), |
| SOC_DAPM_SINGLE("RDAC2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL, |
| 0, 1, 0), |
| }; |
| |
| static const struct snd_kcontrol_new right_boost_mixer[] = { |
| SOC_DAPM_SINGLE_TLV("R2 Volume", WM8983_RIGHT_ADC_BOOST_CTRL, |
| 4, 7, 0, boost_tlv), |
| SOC_DAPM_SINGLE_TLV("AUXR Volume", WM8983_RIGHT_ADC_BOOST_CTRL, |
| 0, 7, 0, boost_tlv) |
| }; |
| |
| static const struct snd_soc_dapm_widget wm8983_dapm_widgets[] = { |
| SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8983_POWER_MANAGEMENT_3, |
| 0, 0), |
| SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8983_POWER_MANAGEMENT_3, |
| 1, 0), |
| SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8983_POWER_MANAGEMENT_2, |
| 0, 0), |
| SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8983_POWER_MANAGEMENT_2, |
| 1, 0), |
| |
| SND_SOC_DAPM_MIXER("Left Output Mixer", WM8983_POWER_MANAGEMENT_3, |
| 2, 0, left_out_mixer, ARRAY_SIZE(left_out_mixer)), |
| SND_SOC_DAPM_MIXER("Right Output Mixer", WM8983_POWER_MANAGEMENT_3, |
| 3, 0, right_out_mixer, ARRAY_SIZE(right_out_mixer)), |
| |
| SND_SOC_DAPM_MIXER("Left Input Mixer", WM8983_POWER_MANAGEMENT_2, |
| 2, 0, left_input_mixer, ARRAY_SIZE(left_input_mixer)), |
| SND_SOC_DAPM_MIXER("Right Input Mixer", WM8983_POWER_MANAGEMENT_2, |
| 3, 0, right_input_mixer, ARRAY_SIZE(right_input_mixer)), |
| |
| SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8983_POWER_MANAGEMENT_2, |
| 4, 0, left_boost_mixer, ARRAY_SIZE(left_boost_mixer)), |
| SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8983_POWER_MANAGEMENT_2, |
| 5, 0, right_boost_mixer, ARRAY_SIZE(right_boost_mixer)), |
| |
| SND_SOC_DAPM_MIXER("OUT3 Mixer", WM8983_POWER_MANAGEMENT_1, |
| 6, 0, out3_mixer, ARRAY_SIZE(out3_mixer)), |
| |
| SND_SOC_DAPM_MIXER("OUT4 Mixer", WM8983_POWER_MANAGEMENT_1, |
| 7, 0, out4_mixer, ARRAY_SIZE(out4_mixer)), |
| |
| SND_SOC_DAPM_PGA("Left Capture PGA", WM8983_LEFT_INP_PGA_GAIN_CTRL, |
| 6, 1, NULL, 0), |
| SND_SOC_DAPM_PGA("Right Capture PGA", WM8983_RIGHT_INP_PGA_GAIN_CTRL, |
| 6, 1, NULL, 0), |
| |
| SND_SOC_DAPM_PGA("Left Headphone Out", WM8983_POWER_MANAGEMENT_2, |
| 7, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Right Headphone Out", WM8983_POWER_MANAGEMENT_2, |
| 8, 0, NULL, 0), |
| |
| SND_SOC_DAPM_PGA("Left Speaker Out", WM8983_POWER_MANAGEMENT_3, |
| 5, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Right Speaker Out", WM8983_POWER_MANAGEMENT_3, |
| 6, 0, NULL, 0), |
| |
| SND_SOC_DAPM_PGA("OUT3 Out", WM8983_POWER_MANAGEMENT_3, |
| 7, 0, NULL, 0), |
| |
| SND_SOC_DAPM_PGA("OUT4 Out", WM8983_POWER_MANAGEMENT_3, |
| 8, 0, NULL, 0), |
| |
| SND_SOC_DAPM_SUPPLY("Mic Bias", WM8983_POWER_MANAGEMENT_1, 4, 0, |
| NULL, 0), |
| |
| SND_SOC_DAPM_INPUT("LIN"), |
| SND_SOC_DAPM_INPUT("LIP"), |
| SND_SOC_DAPM_INPUT("RIN"), |
| SND_SOC_DAPM_INPUT("RIP"), |
| SND_SOC_DAPM_INPUT("AUXL"), |
| SND_SOC_DAPM_INPUT("AUXR"), |
| SND_SOC_DAPM_INPUT("L2"), |
| SND_SOC_DAPM_INPUT("R2"), |
| SND_SOC_DAPM_OUTPUT("HPL"), |
| SND_SOC_DAPM_OUTPUT("HPR"), |
| SND_SOC_DAPM_OUTPUT("SPKL"), |
| SND_SOC_DAPM_OUTPUT("SPKR"), |
| SND_SOC_DAPM_OUTPUT("OUT3"), |
| SND_SOC_DAPM_OUTPUT("OUT4") |
| }; |
| |
| static const struct snd_soc_dapm_route wm8983_audio_map[] = { |
| { "OUT3 Mixer", "LMIX2OUT3 Switch", "Left Output Mixer" }, |
| { "OUT3 Mixer", "LDAC2OUT3 Switch", "Left DAC" }, |
| |
| { "OUT3 Out", NULL, "OUT3 Mixer" }, |
| { "OUT3", NULL, "OUT3 Out" }, |
| |
| { "OUT4 Mixer", "LMIX2OUT4 Switch", "Left Output Mixer" }, |
| { "OUT4 Mixer", "RMIX2OUT4 Switch", "Right Output Mixer" }, |
| { "OUT4 Mixer", "LDAC2OUT4 Switch", "Left DAC" }, |
| { "OUT4 Mixer", "RDAC2OUT4 Switch", "Right DAC" }, |
| |
| { "OUT4 Out", NULL, "OUT4 Mixer" }, |
| { "OUT4", NULL, "OUT4 Out" }, |
| |
| { "Right Output Mixer", "PCM Switch", "Right DAC" }, |
| { "Right Output Mixer", "Aux Switch", "AUXR" }, |
| { "Right Output Mixer", "Line Switch", "Right Boost Mixer" }, |
| |
| { "Left Output Mixer", "PCM Switch", "Left DAC" }, |
| { "Left Output Mixer", "Aux Switch", "AUXL" }, |
| { "Left Output Mixer", "Line Switch", "Left Boost Mixer" }, |
| |
| { "Right Headphone Out", NULL, "Right Output Mixer" }, |
| { "HPR", NULL, "Right Headphone Out" }, |
| |
| { "Left Headphone Out", NULL, "Left Output Mixer" }, |
| { "HPL", NULL, "Left Headphone Out" }, |
| |
| { "Right Speaker Out", NULL, "Right Output Mixer" }, |
| { "SPKR", NULL, "Right Speaker Out" }, |
| |
| { "Left Speaker Out", NULL, "Left Output Mixer" }, |
| { "SPKL", NULL, "Left Speaker Out" }, |
| |
| { "Right ADC", NULL, "Right Boost Mixer" }, |
| |
| { "Right Boost Mixer", "AUXR Volume", "AUXR" }, |
| { "Right Boost Mixer", NULL, "Right Capture PGA" }, |
| { "Right Boost Mixer", "R2 Volume", "R2" }, |
| |
| { "Left ADC", NULL, "Left Boost Mixer" }, |
| |
| { "Left Boost Mixer", "AUXL Volume", "AUXL" }, |
| { "Left Boost Mixer", NULL, "Left Capture PGA" }, |
| { "Left Boost Mixer", "L2 Volume", "L2" }, |
| |
| { "Right Capture PGA", NULL, "Right Input Mixer" }, |
| { "Left Capture PGA", NULL, "Left Input Mixer" }, |
| |
| { "Right Input Mixer", "R2 Switch", "R2" }, |
| { "Right Input Mixer", "MicN Switch", "RIN" }, |
| { "Right Input Mixer", "MicP Switch", "RIP" }, |
| |
| { "Left Input Mixer", "L2 Switch", "L2" }, |
| { "Left Input Mixer", "MicN Switch", "LIN" }, |
| { "Left Input Mixer", "MicP Switch", "LIP" }, |
| }; |
| |
| static int eqmode_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); |
| unsigned int reg; |
| |
| reg = snd_soc_read(codec, WM8983_EQ1_LOW_SHELF); |
| if (reg & WM8983_EQ3DMODE) |
| ucontrol->value.integer.value[0] = 1; |
| else |
| ucontrol->value.integer.value[0] = 0; |
| |
| return 0; |
| } |
| |
| static int eqmode_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); |
| unsigned int regpwr2, regpwr3; |
| unsigned int reg_eq; |
| |
| if (ucontrol->value.integer.value[0] != 0 |
| && ucontrol->value.integer.value[0] != 1) |
| return -EINVAL; |
| |
| reg_eq = snd_soc_read(codec, WM8983_EQ1_LOW_SHELF); |
| switch ((reg_eq & WM8983_EQ3DMODE) >> WM8983_EQ3DMODE_SHIFT) { |
| case 0: |
| if (!ucontrol->value.integer.value[0]) |
| return 0; |
| break; |
| case 1: |
| if (ucontrol->value.integer.value[0]) |
| return 0; |
| break; |
| } |
| |
| regpwr2 = snd_soc_read(codec, WM8983_POWER_MANAGEMENT_2); |
| regpwr3 = snd_soc_read(codec, WM8983_POWER_MANAGEMENT_3); |
| /* disable the DACs and ADCs */ |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_2, |
| WM8983_ADCENR_MASK | WM8983_ADCENL_MASK, 0); |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_3, |
| WM8983_DACENR_MASK | WM8983_DACENL_MASK, 0); |
| /* set the desired eqmode */ |
| snd_soc_update_bits(codec, WM8983_EQ1_LOW_SHELF, |
| WM8983_EQ3DMODE_MASK, |
| ucontrol->value.integer.value[0] |
| << WM8983_EQ3DMODE_SHIFT); |
| /* restore DAC/ADC configuration */ |
| snd_soc_write(codec, WM8983_POWER_MANAGEMENT_2, regpwr2); |
| snd_soc_write(codec, WM8983_POWER_MANAGEMENT_3, regpwr3); |
| return 0; |
| } |
| |
| static bool wm8983_writeable(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case WM8983_SOFTWARE_RESET ... WM8983_RIGHT_ADC_DIGITAL_VOL: |
| case WM8983_EQ1_LOW_SHELF ... WM8983_DAC_LIMITER_2: |
| case WM8983_NOTCH_FILTER_1 ... WM8983_NOTCH_FILTER_4: |
| case WM8983_ALC_CONTROL_1 ... WM8983_PLL_K_3: |
| case WM8983_3D_CONTROL ... WM8983_OUT4_MONO_MIX_CTRL: |
| case WM8983_BIAS_CTRL: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static int wm8983_dac_mute(struct snd_soc_dai *dai, int mute) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| |
| return snd_soc_update_bits(codec, WM8983_DAC_CONTROL, |
| WM8983_SOFTMUTE_MASK, |
| !!mute << WM8983_SOFTMUTE_SHIFT); |
| } |
| |
| static int wm8983_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| u16 format, master, bcp, lrp; |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| format = 0x2; |
| break; |
| case SND_SOC_DAIFMT_RIGHT_J: |
| format = 0x0; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| format = 0x1; |
| break; |
| case SND_SOC_DAIFMT_DSP_A: |
| case SND_SOC_DAIFMT_DSP_B: |
| format = 0x3; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown dai format\n"); |
| return -EINVAL; |
| } |
| |
| snd_soc_update_bits(codec, WM8983_AUDIO_INTERFACE, |
| WM8983_FMT_MASK, format << WM8983_FMT_SHIFT); |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| master = 1; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| master = 0; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown master/slave configuration\n"); |
| return -EINVAL; |
| } |
| |
| snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL, |
| WM8983_MS_MASK, master << WM8983_MS_SHIFT); |
| |
| /* FIXME: We don't currently support DSP A/B modes */ |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_DSP_A: |
| case SND_SOC_DAIFMT_DSP_B: |
| dev_err(dai->dev, "DSP A/B modes are not supported\n"); |
| return -EINVAL; |
| default: |
| break; |
| } |
| |
| bcp = lrp = 0; |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| bcp = lrp = 1; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| bcp = 1; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| lrp = 1; |
| break; |
| default: |
| dev_err(dai->dev, "Unknown polarity configuration\n"); |
| return -EINVAL; |
| } |
| |
| snd_soc_update_bits(codec, WM8983_AUDIO_INTERFACE, |
| WM8983_LRCP_MASK, lrp << WM8983_LRCP_SHIFT); |
| snd_soc_update_bits(codec, WM8983_AUDIO_INTERFACE, |
| WM8983_BCP_MASK, bcp << WM8983_BCP_SHIFT); |
| return 0; |
| } |
| |
| static int wm8983_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| int i; |
| struct snd_soc_codec *codec = dai->codec; |
| struct wm8983_priv *wm8983 = snd_soc_codec_get_drvdata(codec); |
| u16 blen, srate_idx; |
| u32 tmp; |
| int srate_best; |
| int ret; |
| |
| ret = snd_soc_params_to_bclk(params); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to convert params to bclk: %d\n", ret); |
| return ret; |
| } |
| |
| wm8983->bclk = ret; |
| |
| switch (params_width(params)) { |
| case 16: |
| blen = 0x0; |
| break; |
| case 20: |
| blen = 0x1; |
| break; |
| case 24: |
| blen = 0x2; |
| break; |
| case 32: |
| blen = 0x3; |
| break; |
| default: |
| dev_err(dai->dev, "Unsupported word length %u\n", |
| params_width(params)); |
| return -EINVAL; |
| } |
| |
| snd_soc_update_bits(codec, WM8983_AUDIO_INTERFACE, |
| WM8983_WL_MASK, blen << WM8983_WL_SHIFT); |
| |
| /* |
| * match to the nearest possible sample rate and rely |
| * on the array index to configure the SR register |
| */ |
| srate_idx = 0; |
| srate_best = abs(srates[0] - params_rate(params)); |
| for (i = 1; i < ARRAY_SIZE(srates); ++i) { |
| if (abs(srates[i] - params_rate(params)) >= srate_best) |
| continue; |
| srate_idx = i; |
| srate_best = abs(srates[i] - params_rate(params)); |
| } |
| |
| dev_dbg(dai->dev, "Selected SRATE = %d\n", srates[srate_idx]); |
| snd_soc_update_bits(codec, WM8983_ADDITIONAL_CONTROL, |
| WM8983_SR_MASK, srate_idx << WM8983_SR_SHIFT); |
| |
| dev_dbg(dai->dev, "Target BCLK = %uHz\n", wm8983->bclk); |
| dev_dbg(dai->dev, "SYSCLK = %uHz\n", wm8983->sysclk); |
| |
| for (i = 0; i < ARRAY_SIZE(fs_ratios); ++i) { |
| if (wm8983->sysclk / params_rate(params) |
| == fs_ratios[i].ratio) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(fs_ratios)) { |
| dev_err(dai->dev, "Unable to configure MCLK ratio %u/%u\n", |
| wm8983->sysclk, params_rate(params)); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dai->dev, "MCLK ratio = %dfs\n", fs_ratios[i].ratio); |
| snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL, |
| WM8983_MCLKDIV_MASK, i << WM8983_MCLKDIV_SHIFT); |
| |
| /* select the appropriate bclk divider */ |
| tmp = (wm8983->sysclk / fs_ratios[i].div) * 10; |
| for (i = 0; i < ARRAY_SIZE(bclk_divs); ++i) { |
| if (wm8983->bclk == tmp / bclk_divs[i]) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(bclk_divs)) { |
| dev_err(dai->dev, "No matching BCLK divider found\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dai->dev, "BCLK div = %d\n", i); |
| snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL, |
| WM8983_BCLKDIV_MASK, i << WM8983_BCLKDIV_SHIFT); |
| |
| return 0; |
| } |
| |
| struct pll_div { |
| u32 div2:1; |
| u32 n:4; |
| u32 k:24; |
| }; |
| |
| #define FIXED_PLL_SIZE ((1ULL << 24) * 10) |
| static int pll_factors(struct pll_div *pll_div, unsigned int target, |
| unsigned int source) |
| { |
| u64 Kpart; |
| unsigned long int K, Ndiv, Nmod; |
| |
| pll_div->div2 = 0; |
| Ndiv = target / source; |
| if (Ndiv < 6) { |
| source >>= 1; |
| pll_div->div2 = 1; |
| Ndiv = target / source; |
| } |
| |
| if (Ndiv < 6 || Ndiv > 12) { |
| printk(KERN_ERR "%s: WM8983 N value is not within" |
| " the recommended range: %lu\n", __func__, Ndiv); |
| return -EINVAL; |
| } |
| pll_div->n = Ndiv; |
| |
| Nmod = target % source; |
| Kpart = FIXED_PLL_SIZE * (u64)Nmod; |
| |
| do_div(Kpart, source); |
| |
| K = Kpart & 0xffffffff; |
| if ((K % 10) >= 5) |
| K += 5; |
| K /= 10; |
| pll_div->k = K; |
| return 0; |
| } |
| |
| static int wm8983_set_pll(struct snd_soc_dai *dai, int pll_id, |
| int source, unsigned int freq_in, |
| unsigned int freq_out) |
| { |
| int ret; |
| struct snd_soc_codec *codec; |
| struct pll_div pll_div; |
| |
| codec = dai->codec; |
| if (!freq_in || !freq_out) { |
| /* disable the PLL */ |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1, |
| WM8983_PLLEN_MASK, 0); |
| return 0; |
| } else { |
| ret = pll_factors(&pll_div, freq_out * 4 * 2, freq_in); |
| if (ret) |
| return ret; |
| |
| /* disable the PLL before re-programming it */ |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1, |
| WM8983_PLLEN_MASK, 0); |
| |
| /* set PLLN and PRESCALE */ |
| snd_soc_write(codec, WM8983_PLL_N, |
| (pll_div.div2 << WM8983_PLL_PRESCALE_SHIFT) |
| | pll_div.n); |
| /* set PLLK */ |
| snd_soc_write(codec, WM8983_PLL_K_3, pll_div.k & 0x1ff); |
| snd_soc_write(codec, WM8983_PLL_K_2, (pll_div.k >> 9) & 0x1ff); |
| snd_soc_write(codec, WM8983_PLL_K_1, (pll_div.k >> 18)); |
| /* enable the PLL */ |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1, |
| WM8983_PLLEN_MASK, WM8983_PLLEN); |
| } |
| |
| return 0; |
| } |
| |
| static int wm8983_set_sysclk(struct snd_soc_dai *dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct wm8983_priv *wm8983 = snd_soc_codec_get_drvdata(codec); |
| |
| switch (clk_id) { |
| case WM8983_CLKSRC_MCLK: |
| snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL, |
| WM8983_CLKSEL_MASK, 0); |
| break; |
| case WM8983_CLKSRC_PLL: |
| snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL, |
| WM8983_CLKSEL_MASK, WM8983_CLKSEL); |
| break; |
| default: |
| dev_err(dai->dev, "Unknown clock source: %d\n", clk_id); |
| return -EINVAL; |
| } |
| |
| wm8983->sysclk = freq; |
| return 0; |
| } |
| |
| static int wm8983_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| struct wm8983_priv *wm8983 = snd_soc_codec_get_drvdata(codec); |
| int ret; |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| case SND_SOC_BIAS_PREPARE: |
| /* VMID at 100k */ |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1, |
| WM8983_VMIDSEL_MASK, |
| 1 << WM8983_VMIDSEL_SHIFT); |
| break; |
| case SND_SOC_BIAS_STANDBY: |
| if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { |
| ret = regcache_sync(wm8983->regmap); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to sync cache: %d\n", ret); |
| return ret; |
| } |
| /* enable anti-pop features */ |
| snd_soc_update_bits(codec, WM8983_OUT4_TO_ADC, |
| WM8983_POBCTRL_MASK | WM8983_DELEN_MASK, |
| WM8983_POBCTRL | WM8983_DELEN); |
| /* enable thermal shutdown */ |
| snd_soc_update_bits(codec, WM8983_OUTPUT_CTRL, |
| WM8983_TSDEN_MASK, WM8983_TSDEN); |
| /* enable BIASEN */ |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1, |
| WM8983_BIASEN_MASK, WM8983_BIASEN); |
| /* VMID at 100k */ |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1, |
| WM8983_VMIDSEL_MASK, |
| 1 << WM8983_VMIDSEL_SHIFT); |
| msleep(250); |
| /* disable anti-pop features */ |
| snd_soc_update_bits(codec, WM8983_OUT4_TO_ADC, |
| WM8983_POBCTRL_MASK | |
| WM8983_DELEN_MASK, 0); |
| } |
| |
| /* VMID at 500k */ |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1, |
| WM8983_VMIDSEL_MASK, |
| 2 << WM8983_VMIDSEL_SHIFT); |
| break; |
| case SND_SOC_BIAS_OFF: |
| /* disable thermal shutdown */ |
| snd_soc_update_bits(codec, WM8983_OUTPUT_CTRL, |
| WM8983_TSDEN_MASK, 0); |
| /* disable VMIDSEL and BIASEN */ |
| snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1, |
| WM8983_VMIDSEL_MASK | WM8983_BIASEN_MASK, |
| 0); |
| /* wait for VMID to discharge */ |
| msleep(100); |
| snd_soc_write(codec, WM8983_POWER_MANAGEMENT_1, 0); |
| snd_soc_write(codec, WM8983_POWER_MANAGEMENT_2, 0); |
| snd_soc_write(codec, WM8983_POWER_MANAGEMENT_3, 0); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int wm8983_probe(struct snd_soc_codec *codec) |
| { |
| int ret; |
| int i; |
| |
| ret = snd_soc_write(codec, WM8983_SOFTWARE_RESET, 0); |
| if (ret < 0) { |
| dev_err(codec->dev, "Failed to issue reset: %d\n", ret); |
| return ret; |
| } |
| |
| /* set the vol/gain update bits */ |
| for (i = 0; i < ARRAY_SIZE(vol_update_regs); ++i) |
| snd_soc_update_bits(codec, vol_update_regs[i], |
| 0x100, 0x100); |
| |
| /* mute all outputs and set PGAs to minimum gain */ |
| for (i = WM8983_LOUT1_HP_VOLUME_CTRL; |
| i <= WM8983_OUT4_MONO_MIX_CTRL; ++i) |
| snd_soc_update_bits(codec, i, 0x40, 0x40); |
| |
| /* enable soft mute */ |
| snd_soc_update_bits(codec, WM8983_DAC_CONTROL, |
| WM8983_SOFTMUTE_MASK, |
| WM8983_SOFTMUTE); |
| |
| /* enable BIASCUT */ |
| snd_soc_update_bits(codec, WM8983_BIAS_CTRL, |
| WM8983_BIASCUT, WM8983_BIASCUT); |
| return 0; |
| } |
| |
| static const struct snd_soc_dai_ops wm8983_dai_ops = { |
| .digital_mute = wm8983_dac_mute, |
| .hw_params = wm8983_hw_params, |
| .set_fmt = wm8983_set_fmt, |
| .set_sysclk = wm8983_set_sysclk, |
| .set_pll = wm8983_set_pll |
| }; |
| |
| #define WM8983_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_driver wm8983_dai = { |
| .name = "wm8983-hifi", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = SNDRV_PCM_RATE_8000_48000, |
| .formats = WM8983_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = SNDRV_PCM_RATE_8000_48000, |
| .formats = WM8983_FORMATS, |
| }, |
| .ops = &wm8983_dai_ops, |
| .symmetric_rates = 1 |
| }; |
| |
| static struct snd_soc_codec_driver soc_codec_dev_wm8983 = { |
| .probe = wm8983_probe, |
| .set_bias_level = wm8983_set_bias_level, |
| .suspend_bias_off = true, |
| .controls = wm8983_snd_controls, |
| .num_controls = ARRAY_SIZE(wm8983_snd_controls), |
| .dapm_widgets = wm8983_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(wm8983_dapm_widgets), |
| .dapm_routes = wm8983_audio_map, |
| .num_dapm_routes = ARRAY_SIZE(wm8983_audio_map), |
| }; |
| |
| static const struct regmap_config wm8983_regmap = { |
| .reg_bits = 7, |
| .val_bits = 9, |
| |
| .reg_defaults = wm8983_defaults, |
| .num_reg_defaults = ARRAY_SIZE(wm8983_defaults), |
| .cache_type = REGCACHE_RBTREE, |
| .max_register = WM8983_MAX_REGISTER, |
| |
| .writeable_reg = wm8983_writeable, |
| }; |
| |
| #if defined(CONFIG_SPI_MASTER) |
| static int wm8983_spi_probe(struct spi_device *spi) |
| { |
| struct wm8983_priv *wm8983; |
| int ret; |
| |
| wm8983 = devm_kzalloc(&spi->dev, sizeof *wm8983, GFP_KERNEL); |
| if (!wm8983) |
| return -ENOMEM; |
| |
| wm8983->regmap = devm_regmap_init_spi(spi, &wm8983_regmap); |
| if (IS_ERR(wm8983->regmap)) { |
| ret = PTR_ERR(wm8983->regmap); |
| dev_err(&spi->dev, "Failed to init regmap: %d\n", ret); |
| return ret; |
| } |
| |
| spi_set_drvdata(spi, wm8983); |
| |
| ret = snd_soc_register_codec(&spi->dev, |
| &soc_codec_dev_wm8983, &wm8983_dai, 1); |
| return ret; |
| } |
| |
| static int wm8983_spi_remove(struct spi_device *spi) |
| { |
| snd_soc_unregister_codec(&spi->dev); |
| return 0; |
| } |
| |
| static struct spi_driver wm8983_spi_driver = { |
| .driver = { |
| .name = "wm8983", |
| .owner = THIS_MODULE, |
| }, |
| .probe = wm8983_spi_probe, |
| .remove = wm8983_spi_remove |
| }; |
| #endif |
| |
| #if IS_ENABLED(CONFIG_I2C) |
| static int wm8983_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct wm8983_priv *wm8983; |
| int ret; |
| |
| wm8983 = devm_kzalloc(&i2c->dev, sizeof *wm8983, GFP_KERNEL); |
| if (!wm8983) |
| return -ENOMEM; |
| |
| wm8983->regmap = devm_regmap_init_i2c(i2c, &wm8983_regmap); |
| if (IS_ERR(wm8983->regmap)) { |
| ret = PTR_ERR(wm8983->regmap); |
| dev_err(&i2c->dev, "Failed to init regmap: %d\n", ret); |
| return ret; |
| } |
| |
| i2c_set_clientdata(i2c, wm8983); |
| |
| ret = snd_soc_register_codec(&i2c->dev, |
| &soc_codec_dev_wm8983, &wm8983_dai, 1); |
| |
| return ret; |
| } |
| |
| static int wm8983_i2c_remove(struct i2c_client *client) |
| { |
| snd_soc_unregister_codec(&client->dev); |
| return 0; |
| } |
| |
| static const struct i2c_device_id wm8983_i2c_id[] = { |
| { "wm8983", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm8983_i2c_id); |
| |
| static struct i2c_driver wm8983_i2c_driver = { |
| .driver = { |
| .name = "wm8983", |
| }, |
| .probe = wm8983_i2c_probe, |
| .remove = wm8983_i2c_remove, |
| .id_table = wm8983_i2c_id |
| }; |
| #endif |
| |
| static int __init wm8983_modinit(void) |
| { |
| int ret = 0; |
| |
| #if IS_ENABLED(CONFIG_I2C) |
| ret = i2c_add_driver(&wm8983_i2c_driver); |
| if (ret) { |
| printk(KERN_ERR "Failed to register wm8983 I2C driver: %d\n", |
| ret); |
| } |
| #endif |
| #if defined(CONFIG_SPI_MASTER) |
| ret = spi_register_driver(&wm8983_spi_driver); |
| if (ret != 0) { |
| printk(KERN_ERR "Failed to register wm8983 SPI driver: %d\n", |
| ret); |
| } |
| #endif |
| return ret; |
| } |
| module_init(wm8983_modinit); |
| |
| static void __exit wm8983_exit(void) |
| { |
| #if IS_ENABLED(CONFIG_I2C) |
| i2c_del_driver(&wm8983_i2c_driver); |
| #endif |
| #if defined(CONFIG_SPI_MASTER) |
| spi_unregister_driver(&wm8983_spi_driver); |
| #endif |
| } |
| module_exit(wm8983_exit); |
| |
| MODULE_DESCRIPTION("ASoC WM8983 driver"); |
| MODULE_AUTHOR("Dimitris Papastamos <dp@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |