Merge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6
fbdev fixes for 3.3 from Florian Tobias Schandinat
It includes:
- two fixes for OMAP HDMI
- one fix to make new OMAP functions behave as they are supposed to
- one Kconfig dependency fix
- two fixes for viafb for modesetting on VX900 hardware
* tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6:
OMAPDSS: APPLY: make ovl_enable/disable synchronous
OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
viafb: fix IGA1 modesetting on VX900
viafb: select HW scaling on VX900 for IGA2
OMAPDSS: HDMI: hot plug detect fix
OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index 74d29b5..408a992 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -12,7 +12,7 @@
config PANEL_DVI
tristate "DVI output"
- depends on OMAP2_DSS_DPI
+ depends on OMAP2_DSS_DPI && I2C
help
Driver for external monitors, connected via DVI. The driver uses i2c
to read EDID information from the monitor.
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 052dc87..87b3e25 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1276,6 +1276,9 @@
spin_unlock_irqrestore(&data_lock, flags);
+ /* wait for overlay to be enabled */
+ wait_pending_extra_info_updates();
+
mutex_unlock(&apply_lock);
return 0;
@@ -1313,6 +1316,9 @@
spin_unlock_irqrestore(&data_lock, flags);
+ /* wait for the overlay to be disabled */
+ wait_pending_extra_info_updates();
+
mutex_unlock(&apply_lock);
return 0;
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index d7aa3b0..a36b934 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -165,9 +165,25 @@
DSSDBG("hdmi_runtime_get\n");
+ /*
+ * HACK: Add dss_runtime_get() to ensure DSS clock domain is enabled.
+ * This should be removed later.
+ */
+ r = dss_runtime_get();
+ if (r < 0)
+ goto err_get_dss;
+
r = pm_runtime_get_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
- return r < 0 ? r : 0;
+ if (r < 0)
+ goto err_get_hdmi;
+
+ return 0;
+
+err_get_hdmi:
+ dss_runtime_put();
+err_get_dss:
+ return r;
}
static void hdmi_runtime_put(void)
@@ -178,6 +194,12 @@
r = pm_runtime_put_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
+
+ /*
+ * HACK: This is added to complement the dss_runtime_get() call in
+ * hdmi_runtime_get(). This should be removed later.
+ */
+ dss_runtime_put();
}
int hdmi_init_display(struct omap_dss_device *dssdev)
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 2d72334..6847a47 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -479,14 +479,7 @@
bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data)
{
- int r;
-
- void __iomem *base = hdmi_core_sys_base(ip_data);
-
- /* HPD */
- r = REG_GET(base, HDMI_CORE_SYS_SYS_STAT, 1, 1);
-
- return r == 1;
+ return gpio_get_value(ip_data->hpd_gpio);
}
static void hdmi_core_init(struct hdmi_core_video_config *video_cfg,
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index d5aaca9..8497727 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1810,7 +1810,11 @@
break;
}
+ /* magic required on VX900 for correct modesetting on IGA1 */
+ via_write_reg_mask(VIACR, 0x45, 0x00, 0x01);
+
/* probably this should go to the scaling code one day */
+ via_write_reg_mask(VIACR, 0xFD, 0, 0x80); /* VX900 hw scale on IGA2 */
viafb_write_regx(scaling_parameters, ARRAY_SIZE(scaling_parameters));
/* Fill VPIT Parameters */