| /* |
| |
| Broadcom B43 wireless driver |
| IEEE 802.11g PHY driver |
| |
| Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, |
| Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> |
| Copyright (c) 2005-2008 Michael Buesch <m@bues.ch> |
| Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> |
| Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| Boston, MA 02110-1301, USA. |
| |
| */ |
| |
| #include "b43.h" |
| #include "phy_g.h" |
| #include "phy_common.h" |
| #include "lo.h" |
| #include "main.h" |
| |
| #include <linux/bitrev.h> |
| #include <linux/slab.h> |
| |
| |
| static const s8 b43_tssi2dbm_g_table[] = { |
| 77, 77, 77, 76, |
| 76, 76, 75, 75, |
| 74, 74, 73, 73, |
| 73, 72, 72, 71, |
| 71, 70, 70, 69, |
| 68, 68, 67, 67, |
| 66, 65, 65, 64, |
| 63, 63, 62, 61, |
| 60, 59, 58, 57, |
| 56, 55, 54, 53, |
| 52, 50, 49, 47, |
| 45, 43, 40, 37, |
| 33, 28, 22, 14, |
| 5, -7, -20, -20, |
| -20, -20, -20, -20, |
| -20, -20, -20, -20, |
| }; |
| |
| static const u8 b43_radio_channel_codes_bg[] = { |
| 12, 17, 22, 27, |
| 32, 37, 42, 47, |
| 52, 57, 62, 67, |
| 72, 84, |
| }; |
| |
| |
| static void b43_calc_nrssi_threshold(struct b43_wldev *dev); |
| |
| |
| #define bitrev4(tmp) (bitrev8(tmp) >> 4) |
| |
| |
| /* Get the freq, as it has to be written to the device. */ |
| static inline u16 channel2freq_bg(u8 channel) |
| { |
| B43_WARN_ON(!(channel >= 1 && channel <= 14)); |
| |
| return b43_radio_channel_codes_bg[channel - 1]; |
| } |
| |
| static void generate_rfatt_list(struct b43_wldev *dev, |
| struct b43_rfatt_list *list) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| /* APHY.rev < 5 || GPHY.rev < 6 */ |
| static const struct b43_rfatt rfatt_0[] = { |
| {.att = 3,.with_padmix = 0,}, |
| {.att = 1,.with_padmix = 0,}, |
| {.att = 5,.with_padmix = 0,}, |
| {.att = 7,.with_padmix = 0,}, |
| {.att = 9,.with_padmix = 0,}, |
| {.att = 2,.with_padmix = 0,}, |
| {.att = 0,.with_padmix = 0,}, |
| {.att = 4,.with_padmix = 0,}, |
| {.att = 6,.with_padmix = 0,}, |
| {.att = 8,.with_padmix = 0,}, |
| {.att = 1,.with_padmix = 1,}, |
| {.att = 2,.with_padmix = 1,}, |
| {.att = 3,.with_padmix = 1,}, |
| {.att = 4,.with_padmix = 1,}, |
| }; |
| /* Radio.rev == 8 && Radio.version == 0x2050 */ |
| static const struct b43_rfatt rfatt_1[] = { |
| {.att = 2,.with_padmix = 1,}, |
| {.att = 4,.with_padmix = 1,}, |
| {.att = 6,.with_padmix = 1,}, |
| {.att = 8,.with_padmix = 1,}, |
| {.att = 10,.with_padmix = 1,}, |
| {.att = 12,.with_padmix = 1,}, |
| {.att = 14,.with_padmix = 1,}, |
| }; |
| /* Otherwise */ |
| static const struct b43_rfatt rfatt_2[] = { |
| {.att = 0,.with_padmix = 1,}, |
| {.att = 2,.with_padmix = 1,}, |
| {.att = 4,.with_padmix = 1,}, |
| {.att = 6,.with_padmix = 1,}, |
| {.att = 8,.with_padmix = 1,}, |
| {.att = 9,.with_padmix = 1,}, |
| {.att = 9,.with_padmix = 1,}, |
| }; |
| |
| if (!b43_has_hardware_pctl(dev)) { |
| /* Software pctl */ |
| list->list = rfatt_0; |
| list->len = ARRAY_SIZE(rfatt_0); |
| list->min_val = 0; |
| list->max_val = 9; |
| return; |
| } |
| if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { |
| /* Hardware pctl */ |
| list->list = rfatt_1; |
| list->len = ARRAY_SIZE(rfatt_1); |
| list->min_val = 0; |
| list->max_val = 14; |
| return; |
| } |
| /* Hardware pctl */ |
| list->list = rfatt_2; |
| list->len = ARRAY_SIZE(rfatt_2); |
| list->min_val = 0; |
| list->max_val = 9; |
| } |
| |
| static void generate_bbatt_list(struct b43_wldev *dev, |
| struct b43_bbatt_list *list) |
| { |
| static const struct b43_bbatt bbatt_0[] = { |
| {.att = 0,}, |
| {.att = 1,}, |
| {.att = 2,}, |
| {.att = 3,}, |
| {.att = 4,}, |
| {.att = 5,}, |
| {.att = 6,}, |
| {.att = 7,}, |
| {.att = 8,}, |
| }; |
| |
| list->list = bbatt_0; |
| list->len = ARRAY_SIZE(bbatt_0); |
| list->min_val = 0; |
| list->max_val = 8; |
| } |
| |
| static void b43_shm_clear_tssi(struct b43_wldev *dev) |
| { |
| b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F); |
| b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F); |
| b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F); |
| b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F); |
| } |
| |
| /* Synthetic PU workaround */ |
| static void b43_synth_pu_workaround(struct b43_wldev *dev, u8 channel) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| might_sleep(); |
| |
| if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) { |
| /* We do not need the workaround. */ |
| return; |
| } |
| |
| if (channel <= 10) { |
| b43_write16(dev, B43_MMIO_CHANNEL, |
| channel2freq_bg(channel + 4)); |
| } else { |
| b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(1)); |
| } |
| msleep(1); |
| b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); |
| } |
| |
| /* Set the baseband attenuation value on chip. */ |
| void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev, |
| u16 baseband_attenuation) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| if (phy->analog == 0) { |
| b43_write16(dev, B43_MMIO_PHY0, (b43_read16(dev, B43_MMIO_PHY0) |
| & 0xFFF0) | |
| baseband_attenuation); |
| } else if (phy->analog > 1) { |
| b43_phy_maskset(dev, B43_PHY_DACCTL, 0xFFC3, (baseband_attenuation << 2)); |
| } else { |
| b43_phy_maskset(dev, B43_PHY_DACCTL, 0xFF87, (baseband_attenuation << 3)); |
| } |
| } |
| |
| /* Adjust the transmission power output (G-PHY) */ |
| static void b43_set_txpower_g(struct b43_wldev *dev, |
| const struct b43_bbatt *bbatt, |
| const struct b43_rfatt *rfatt, u8 tx_control) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| struct b43_txpower_lo_control *lo = gphy->lo_control; |
| u16 bb, rf; |
| u16 tx_bias, tx_magn; |
| |
| bb = bbatt->att; |
| rf = rfatt->att; |
| tx_bias = lo->tx_bias; |
| tx_magn = lo->tx_magn; |
| if (unlikely(tx_bias == 0xFF)) |
| tx_bias = 0; |
| |
| /* Save the values for later. Use memmove, because it's valid |
| * to pass &gphy->rfatt as rfatt pointer argument. Same for bbatt. */ |
| gphy->tx_control = tx_control; |
| memmove(&gphy->rfatt, rfatt, sizeof(*rfatt)); |
| gphy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX); |
| memmove(&gphy->bbatt, bbatt, sizeof(*bbatt)); |
| |
| if (b43_debug(dev, B43_DBG_XMITPOWER)) { |
| b43dbg(dev->wl, "Tuning TX-power to bbatt(%u), " |
| "rfatt(%u), tx_control(0x%02X), " |
| "tx_bias(0x%02X), tx_magn(0x%02X)\n", |
| bb, rf, tx_control, tx_bias, tx_magn); |
| } |
| |
| b43_gphy_set_baseband_attenuation(dev, bb); |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_RFATT, rf); |
| if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { |
| b43_radio_write16(dev, 0x43, |
| (rf & 0x000F) | (tx_control & 0x0070)); |
| } else { |
| b43_radio_maskset(dev, 0x43, 0xFFF0, (rf & 0x000F)); |
| b43_radio_maskset(dev, 0x52, ~0x0070, (tx_control & 0x0070)); |
| } |
| if (has_tx_magnification(phy)) { |
| b43_radio_write16(dev, 0x52, tx_magn | tx_bias); |
| } else { |
| b43_radio_maskset(dev, 0x52, 0xFFF0, (tx_bias & 0x000F)); |
| } |
| b43_lo_g_adjust(dev); |
| } |
| |
| /* GPHY_TSSI_Power_Lookup_Table_Init */ |
| static void b43_gphy_tssi_power_lt_init(struct b43_wldev *dev) |
| { |
| struct b43_phy_g *gphy = dev->phy.g; |
| int i; |
| u16 value; |
| |
| for (i = 0; i < 32; i++) |
| b43_ofdmtab_write16(dev, 0x3C20, i, gphy->tssi2dbm[i]); |
| for (i = 32; i < 64; i++) |
| b43_ofdmtab_write16(dev, 0x3C00, i - 32, gphy->tssi2dbm[i]); |
| for (i = 0; i < 64; i += 2) { |
| value = (u16) gphy->tssi2dbm[i]; |
| value |= ((u16) gphy->tssi2dbm[i + 1]) << 8; |
| b43_phy_write(dev, 0x380 + (i / 2), value); |
| } |
| } |
| |
| /* GPHY_Gain_Lookup_Table_Init */ |
| static void b43_gphy_gain_lt_init(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| struct b43_txpower_lo_control *lo = gphy->lo_control; |
| u16 nr_written = 0; |
| u16 tmp; |
| u8 rf, bb; |
| |
| for (rf = 0; rf < lo->rfatt_list.len; rf++) { |
| for (bb = 0; bb < lo->bbatt_list.len; bb++) { |
| if (nr_written >= 0x40) |
| return; |
| tmp = lo->bbatt_list.list[bb].att; |
| tmp <<= 8; |
| if (phy->radio_rev == 8) |
| tmp |= 0x50; |
| else |
| tmp |= 0x40; |
| tmp |= lo->rfatt_list.list[rf].att; |
| b43_phy_write(dev, 0x3C0 + nr_written, tmp); |
| nr_written++; |
| } |
| } |
| } |
| |
| static void b43_set_all_gains(struct b43_wldev *dev, |
| s16 first, s16 second, s16 third) |
| { |
| struct b43_phy *phy = &dev->phy; |
| u16 i; |
| u16 start = 0x08, end = 0x18; |
| u16 tmp; |
| u16 table; |
| |
| if (phy->rev <= 1) { |
| start = 0x10; |
| end = 0x20; |
| } |
| |
| table = B43_OFDMTAB_GAINX; |
| if (phy->rev <= 1) |
| table = B43_OFDMTAB_GAINX_R1; |
| for (i = 0; i < 4; i++) |
| b43_ofdmtab_write16(dev, table, i, first); |
| |
| for (i = start; i < end; i++) |
| b43_ofdmtab_write16(dev, table, i, second); |
| |
| if (third != -1) { |
| tmp = ((u16) third << 14) | ((u16) third << 6); |
| b43_phy_maskset(dev, 0x04A0, 0xBFBF, tmp); |
| b43_phy_maskset(dev, 0x04A1, 0xBFBF, tmp); |
| b43_phy_maskset(dev, 0x04A2, 0xBFBF, tmp); |
| } |
| b43_dummy_transmission(dev, false, true); |
| } |
| |
| static void b43_set_original_gains(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| u16 i, tmp; |
| u16 table; |
| u16 start = 0x0008, end = 0x0018; |
| |
| if (phy->rev <= 1) { |
| start = 0x0010; |
| end = 0x0020; |
| } |
| |
| table = B43_OFDMTAB_GAINX; |
| if (phy->rev <= 1) |
| table = B43_OFDMTAB_GAINX_R1; |
| for (i = 0; i < 4; i++) { |
| tmp = (i & 0xFFFC); |
| tmp |= (i & 0x0001) << 1; |
| tmp |= (i & 0x0002) >> 1; |
| |
| b43_ofdmtab_write16(dev, table, i, tmp); |
| } |
| |
| for (i = start; i < end; i++) |
| b43_ofdmtab_write16(dev, table, i, i - start); |
| |
| b43_phy_maskset(dev, 0x04A0, 0xBFBF, 0x4040); |
| b43_phy_maskset(dev, 0x04A1, 0xBFBF, 0x4040); |
| b43_phy_maskset(dev, 0x04A2, 0xBFBF, 0x4000); |
| b43_dummy_transmission(dev, false, true); |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ |
| static void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val) |
| { |
| b43_phy_write(dev, B43_PHY_NRSSILT_CTRL, offset); |
| b43_phy_write(dev, B43_PHY_NRSSILT_DATA, (u16) val); |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ |
| static s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset) |
| { |
| u16 val; |
| |
| b43_phy_write(dev, B43_PHY_NRSSILT_CTRL, offset); |
| val = b43_phy_read(dev, B43_PHY_NRSSILT_DATA); |
| |
| return (s16) val; |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ |
| static void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val) |
| { |
| u16 i; |
| s16 tmp; |
| |
| for (i = 0; i < 64; i++) { |
| tmp = b43_nrssi_hw_read(dev, i); |
| tmp -= val; |
| tmp = clamp_val(tmp, -32, 31); |
| b43_nrssi_hw_write(dev, i, tmp); |
| } |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ |
| static void b43_nrssi_mem_update(struct b43_wldev *dev) |
| { |
| struct b43_phy_g *gphy = dev->phy.g; |
| s16 i, delta; |
| s32 tmp; |
| |
| delta = 0x1F - gphy->nrssi[0]; |
| for (i = 0; i < 64; i++) { |
| tmp = (i - delta) * gphy->nrssislope; |
| tmp /= 0x10000; |
| tmp += 0x3A; |
| tmp = clamp_val(tmp, 0, 0x3F); |
| gphy->nrssi_lt[i] = tmp; |
| } |
| } |
| |
| static void b43_calc_nrssi_offset(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| u16 backup[20] = { 0 }; |
| s16 v47F; |
| u16 i; |
| u16 saved = 0xFFFF; |
| |
| backup[0] = b43_phy_read(dev, 0x0001); |
| backup[1] = b43_phy_read(dev, 0x0811); |
| backup[2] = b43_phy_read(dev, 0x0812); |
| if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ |
| backup[3] = b43_phy_read(dev, 0x0814); |
| backup[4] = b43_phy_read(dev, 0x0815); |
| } |
| backup[5] = b43_phy_read(dev, 0x005A); |
| backup[6] = b43_phy_read(dev, 0x0059); |
| backup[7] = b43_phy_read(dev, 0x0058); |
| backup[8] = b43_phy_read(dev, 0x000A); |
| backup[9] = b43_phy_read(dev, 0x0003); |
| backup[10] = b43_radio_read16(dev, 0x007A); |
| backup[11] = b43_radio_read16(dev, 0x0043); |
| |
| b43_phy_mask(dev, 0x0429, 0x7FFF); |
| b43_phy_maskset(dev, 0x0001, 0x3FFF, 0x4000); |
| b43_phy_set(dev, 0x0811, 0x000C); |
| b43_phy_maskset(dev, 0x0812, 0xFFF3, 0x0004); |
| b43_phy_mask(dev, 0x0802, ~(0x1 | 0x2)); |
| if (phy->rev >= 6) { |
| backup[12] = b43_phy_read(dev, 0x002E); |
| backup[13] = b43_phy_read(dev, 0x002F); |
| backup[14] = b43_phy_read(dev, 0x080F); |
| backup[15] = b43_phy_read(dev, 0x0810); |
| backup[16] = b43_phy_read(dev, 0x0801); |
| backup[17] = b43_phy_read(dev, 0x0060); |
| backup[18] = b43_phy_read(dev, 0x0014); |
| backup[19] = b43_phy_read(dev, 0x0478); |
| |
| b43_phy_write(dev, 0x002E, 0); |
| b43_phy_write(dev, 0x002F, 0); |
| b43_phy_write(dev, 0x080F, 0); |
| b43_phy_write(dev, 0x0810, 0); |
| b43_phy_set(dev, 0x0478, 0x0100); |
| b43_phy_set(dev, 0x0801, 0x0040); |
| b43_phy_set(dev, 0x0060, 0x0040); |
| b43_phy_set(dev, 0x0014, 0x0200); |
| } |
| b43_radio_set(dev, 0x007A, 0x0070); |
| b43_radio_set(dev, 0x007A, 0x0080); |
| udelay(30); |
| |
| v47F = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); |
| if (v47F >= 0x20) |
| v47F -= 0x40; |
| if (v47F == 31) { |
| for (i = 7; i >= 4; i--) { |
| b43_radio_write16(dev, 0x007B, i); |
| udelay(20); |
| v47F = |
| (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); |
| if (v47F >= 0x20) |
| v47F -= 0x40; |
| if (v47F < 31 && saved == 0xFFFF) |
| saved = i; |
| } |
| if (saved == 0xFFFF) |
| saved = 4; |
| } else { |
| b43_radio_mask(dev, 0x007A, 0x007F); |
| if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ |
| b43_phy_set(dev, 0x0814, 0x0001); |
| b43_phy_mask(dev, 0x0815, 0xFFFE); |
| } |
| b43_phy_set(dev, 0x0811, 0x000C); |
| b43_phy_set(dev, 0x0812, 0x000C); |
| b43_phy_set(dev, 0x0811, 0x0030); |
| b43_phy_set(dev, 0x0812, 0x0030); |
| b43_phy_write(dev, 0x005A, 0x0480); |
| b43_phy_write(dev, 0x0059, 0x0810); |
| b43_phy_write(dev, 0x0058, 0x000D); |
| if (phy->rev == 0) { |
| b43_phy_write(dev, 0x0003, 0x0122); |
| } else { |
| b43_phy_set(dev, 0x000A, 0x2000); |
| } |
| if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ |
| b43_phy_set(dev, 0x0814, 0x0004); |
| b43_phy_mask(dev, 0x0815, 0xFFFB); |
| } |
| b43_phy_maskset(dev, 0x0003, 0xFF9F, 0x0040); |
| b43_radio_set(dev, 0x007A, 0x000F); |
| b43_set_all_gains(dev, 3, 0, 1); |
| b43_radio_maskset(dev, 0x0043, 0x00F0, 0x000F); |
| udelay(30); |
| v47F = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); |
| if (v47F >= 0x20) |
| v47F -= 0x40; |
| if (v47F == -32) { |
| for (i = 0; i < 4; i++) { |
| b43_radio_write16(dev, 0x007B, i); |
| udelay(20); |
| v47F = |
| (s16) ((b43_phy_read(dev, 0x047F) >> 8) & |
| 0x003F); |
| if (v47F >= 0x20) |
| v47F -= 0x40; |
| if (v47F > -31 && saved == 0xFFFF) |
| saved = i; |
| } |
| if (saved == 0xFFFF) |
| saved = 3; |
| } else |
| saved = 0; |
| } |
| b43_radio_write16(dev, 0x007B, saved); |
| |
| if (phy->rev >= 6) { |
| b43_phy_write(dev, 0x002E, backup[12]); |
| b43_phy_write(dev, 0x002F, backup[13]); |
| b43_phy_write(dev, 0x080F, backup[14]); |
| b43_phy_write(dev, 0x0810, backup[15]); |
| } |
| if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ |
| b43_phy_write(dev, 0x0814, backup[3]); |
| b43_phy_write(dev, 0x0815, backup[4]); |
| } |
| b43_phy_write(dev, 0x005A, backup[5]); |
| b43_phy_write(dev, 0x0059, backup[6]); |
| b43_phy_write(dev, 0x0058, backup[7]); |
| b43_phy_write(dev, 0x000A, backup[8]); |
| b43_phy_write(dev, 0x0003, backup[9]); |
| b43_radio_write16(dev, 0x0043, backup[11]); |
| b43_radio_write16(dev, 0x007A, backup[10]); |
| b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x1 | 0x2); |
| b43_phy_set(dev, 0x0429, 0x8000); |
| b43_set_original_gains(dev); |
| if (phy->rev >= 6) { |
| b43_phy_write(dev, 0x0801, backup[16]); |
| b43_phy_write(dev, 0x0060, backup[17]); |
| b43_phy_write(dev, 0x0014, backup[18]); |
| b43_phy_write(dev, 0x0478, backup[19]); |
| } |
| b43_phy_write(dev, 0x0001, backup[0]); |
| b43_phy_write(dev, 0x0812, backup[2]); |
| b43_phy_write(dev, 0x0811, backup[1]); |
| } |
| |
| static void b43_calc_nrssi_slope(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| u16 backup[18] = { 0 }; |
| u16 tmp; |
| s16 nrssi0, nrssi1; |
| |
| B43_WARN_ON(phy->type != B43_PHYTYPE_G); |
| |
| if (phy->radio_rev >= 9) |
| return; |
| if (phy->radio_rev == 8) |
| b43_calc_nrssi_offset(dev); |
| |
| b43_phy_mask(dev, B43_PHY_G_CRS, 0x7FFF); |
| b43_phy_mask(dev, 0x0802, 0xFFFC); |
| backup[7] = b43_read16(dev, 0x03E2); |
| b43_write16(dev, 0x03E2, b43_read16(dev, 0x03E2) | 0x8000); |
| backup[0] = b43_radio_read16(dev, 0x007A); |
| backup[1] = b43_radio_read16(dev, 0x0052); |
| backup[2] = b43_radio_read16(dev, 0x0043); |
| backup[3] = b43_phy_read(dev, 0x0015); |
| backup[4] = b43_phy_read(dev, 0x005A); |
| backup[5] = b43_phy_read(dev, 0x0059); |
| backup[6] = b43_phy_read(dev, 0x0058); |
| backup[8] = b43_read16(dev, 0x03E6); |
| backup[9] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); |
| if (phy->rev >= 3) { |
| backup[10] = b43_phy_read(dev, 0x002E); |
| backup[11] = b43_phy_read(dev, 0x002F); |
| backup[12] = b43_phy_read(dev, 0x080F); |
| backup[13] = b43_phy_read(dev, B43_PHY_G_LO_CONTROL); |
| backup[14] = b43_phy_read(dev, 0x0801); |
| backup[15] = b43_phy_read(dev, 0x0060); |
| backup[16] = b43_phy_read(dev, 0x0014); |
| backup[17] = b43_phy_read(dev, 0x0478); |
| b43_phy_write(dev, 0x002E, 0); |
| b43_phy_write(dev, B43_PHY_G_LO_CONTROL, 0); |
| switch (phy->rev) { |
| case 4: |
| case 6: |
| case 7: |
| b43_phy_set(dev, 0x0478, 0x0100); |
| b43_phy_set(dev, 0x0801, 0x0040); |
| break; |
| case 3: |
| case 5: |
| b43_phy_mask(dev, 0x0801, 0xFFBF); |
| break; |
| } |
| b43_phy_set(dev, 0x0060, 0x0040); |
| b43_phy_set(dev, 0x0014, 0x0200); |
| } |
| b43_radio_set(dev, 0x007A, 0x0070); |
| b43_set_all_gains(dev, 0, 8, 0); |
| b43_radio_mask(dev, 0x007A, 0x00F7); |
| if (phy->rev >= 2) { |
| b43_phy_maskset(dev, 0x0811, 0xFFCF, 0x0030); |
| b43_phy_maskset(dev, 0x0812, 0xFFCF, 0x0010); |
| } |
| b43_radio_set(dev, 0x007A, 0x0080); |
| udelay(20); |
| |
| nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); |
| if (nrssi0 >= 0x0020) |
| nrssi0 -= 0x0040; |
| |
| b43_radio_mask(dev, 0x007A, 0x007F); |
| if (phy->rev >= 2) { |
| b43_phy_maskset(dev, 0x0003, 0xFF9F, 0x0040); |
| } |
| |
| b43_write16(dev, B43_MMIO_CHANNEL_EXT, |
| b43_read16(dev, B43_MMIO_CHANNEL_EXT) |
| | 0x2000); |
| b43_radio_set(dev, 0x007A, 0x000F); |
| b43_phy_write(dev, 0x0015, 0xF330); |
| if (phy->rev >= 2) { |
| b43_phy_maskset(dev, 0x0812, 0xFFCF, 0x0020); |
| b43_phy_maskset(dev, 0x0811, 0xFFCF, 0x0020); |
| } |
| |
| b43_set_all_gains(dev, 3, 0, 1); |
| if (phy->radio_rev == 8) { |
| b43_radio_write16(dev, 0x0043, 0x001F); |
| } else { |
| tmp = b43_radio_read16(dev, 0x0052) & 0xFF0F; |
| b43_radio_write16(dev, 0x0052, tmp | 0x0060); |
| tmp = b43_radio_read16(dev, 0x0043) & 0xFFF0; |
| b43_radio_write16(dev, 0x0043, tmp | 0x0009); |
| } |
| b43_phy_write(dev, 0x005A, 0x0480); |
| b43_phy_write(dev, 0x0059, 0x0810); |
| b43_phy_write(dev, 0x0058, 0x000D); |
| udelay(20); |
| nrssi1 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); |
| if (nrssi1 >= 0x0020) |
| nrssi1 -= 0x0040; |
| if (nrssi0 == nrssi1) |
| gphy->nrssislope = 0x00010000; |
| else |
| gphy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); |
| if (nrssi0 >= -4) { |
| gphy->nrssi[0] = nrssi1; |
| gphy->nrssi[1] = nrssi0; |
| } |
| if (phy->rev >= 3) { |
| b43_phy_write(dev, 0x002E, backup[10]); |
| b43_phy_write(dev, 0x002F, backup[11]); |
| b43_phy_write(dev, 0x080F, backup[12]); |
| b43_phy_write(dev, B43_PHY_G_LO_CONTROL, backup[13]); |
| } |
| if (phy->rev >= 2) { |
| b43_phy_mask(dev, 0x0812, 0xFFCF); |
| b43_phy_mask(dev, 0x0811, 0xFFCF); |
| } |
| |
| b43_radio_write16(dev, 0x007A, backup[0]); |
| b43_radio_write16(dev, 0x0052, backup[1]); |
| b43_radio_write16(dev, 0x0043, backup[2]); |
| b43_write16(dev, 0x03E2, backup[7]); |
| b43_write16(dev, 0x03E6, backup[8]); |
| b43_write16(dev, B43_MMIO_CHANNEL_EXT, backup[9]); |
| b43_phy_write(dev, 0x0015, backup[3]); |
| b43_phy_write(dev, 0x005A, backup[4]); |
| b43_phy_write(dev, 0x0059, backup[5]); |
| b43_phy_write(dev, 0x0058, backup[6]); |
| b43_synth_pu_workaround(dev, phy->channel); |
| b43_phy_set(dev, 0x0802, (0x0001 | 0x0002)); |
| b43_set_original_gains(dev); |
| b43_phy_set(dev, B43_PHY_G_CRS, 0x8000); |
| if (phy->rev >= 3) { |
| b43_phy_write(dev, 0x0801, backup[14]); |
| b43_phy_write(dev, 0x0060, backup[15]); |
| b43_phy_write(dev, 0x0014, backup[16]); |
| b43_phy_write(dev, 0x0478, backup[17]); |
| } |
| b43_nrssi_mem_update(dev); |
| b43_calc_nrssi_threshold(dev); |
| } |
| |
| static void b43_calc_nrssi_threshold(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| s32 a, b; |
| s16 tmp16; |
| u16 tmp_u16; |
| |
| B43_WARN_ON(phy->type != B43_PHYTYPE_G); |
| |
| if (!phy->gmode || |
| !(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) { |
| tmp16 = b43_nrssi_hw_read(dev, 0x20); |
| if (tmp16 >= 0x20) |
| tmp16 -= 0x40; |
| if (tmp16 < 3) { |
| b43_phy_maskset(dev, 0x048A, 0xF000, 0x09EB); |
| } else { |
| b43_phy_maskset(dev, 0x048A, 0xF000, 0x0AED); |
| } |
| } else { |
| if (gphy->interfmode == B43_INTERFMODE_NONWLAN) { |
| a = 0xE; |
| b = 0xA; |
| } else if (!gphy->aci_wlan_automatic && gphy->aci_enable) { |
| a = 0x13; |
| b = 0x12; |
| } else { |
| a = 0xE; |
| b = 0x11; |
| } |
| |
| a = a * (gphy->nrssi[1] - gphy->nrssi[0]); |
| a += (gphy->nrssi[0] << 6); |
| if (a < 32) |
| a += 31; |
| else |
| a += 32; |
| a = a >> 6; |
| a = clamp_val(a, -31, 31); |
| |
| b = b * (gphy->nrssi[1] - gphy->nrssi[0]); |
| b += (gphy->nrssi[0] << 6); |
| if (b < 32) |
| b += 31; |
| else |
| b += 32; |
| b = b >> 6; |
| b = clamp_val(b, -31, 31); |
| |
| tmp_u16 = b43_phy_read(dev, 0x048A) & 0xF000; |
| tmp_u16 |= ((u32) b & 0x0000003F); |
| tmp_u16 |= (((u32) a & 0x0000003F) << 6); |
| b43_phy_write(dev, 0x048A, tmp_u16); |
| } |
| } |
| |
| /* Stack implementation to save/restore values from the |
| * interference mitigation code. |
| * It is save to restore values in random order. |
| */ |
| static void _stack_save(u32 *_stackptr, size_t *stackidx, |
| u8 id, u16 offset, u16 value) |
| { |
| u32 *stackptr = &(_stackptr[*stackidx]); |
| |
| B43_WARN_ON(offset & 0xF000); |
| B43_WARN_ON(id & 0xF0); |
| *stackptr = offset; |
| *stackptr |= ((u32) id) << 12; |
| *stackptr |= ((u32) value) << 16; |
| (*stackidx)++; |
| B43_WARN_ON(*stackidx >= B43_INTERFSTACK_SIZE); |
| } |
| |
| static u16 _stack_restore(u32 *stackptr, u8 id, u16 offset) |
| { |
| size_t i; |
| |
| B43_WARN_ON(offset & 0xF000); |
| B43_WARN_ON(id & 0xF0); |
| for (i = 0; i < B43_INTERFSTACK_SIZE; i++, stackptr++) { |
| if ((*stackptr & 0x00000FFF) != offset) |
| continue; |
| if (((*stackptr & 0x0000F000) >> 12) != id) |
| continue; |
| return ((*stackptr & 0xFFFF0000) >> 16); |
| } |
| B43_WARN_ON(1); |
| |
| return 0; |
| } |
| |
| #define phy_stacksave(offset) \ |
| do { \ |
| _stack_save(stack, &stackidx, 0x1, (offset), \ |
| b43_phy_read(dev, (offset))); \ |
| } while (0) |
| #define phy_stackrestore(offset) \ |
| do { \ |
| b43_phy_write(dev, (offset), \ |
| _stack_restore(stack, 0x1, \ |
| (offset))); \ |
| } while (0) |
| #define radio_stacksave(offset) \ |
| do { \ |
| _stack_save(stack, &stackidx, 0x2, (offset), \ |
| b43_radio_read16(dev, (offset))); \ |
| } while (0) |
| #define radio_stackrestore(offset) \ |
| do { \ |
| b43_radio_write16(dev, (offset), \ |
| _stack_restore(stack, 0x2, \ |
| (offset))); \ |
| } while (0) |
| #define ofdmtab_stacksave(table, offset) \ |
| do { \ |
| _stack_save(stack, &stackidx, 0x3, (offset)|(table), \ |
| b43_ofdmtab_read16(dev, (table), (offset))); \ |
| } while (0) |
| #define ofdmtab_stackrestore(table, offset) \ |
| do { \ |
| b43_ofdmtab_write16(dev, (table), (offset), \ |
| _stack_restore(stack, 0x3, \ |
| (offset)|(table))); \ |
| } while (0) |
| |
| static void |
| b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| u16 tmp, flipped; |
| size_t stackidx = 0; |
| u32 *stack = gphy->interfstack; |
| |
| switch (mode) { |
| case B43_INTERFMODE_NONWLAN: |
| if (phy->rev != 1) { |
| b43_phy_set(dev, 0x042B, 0x0800); |
| b43_phy_mask(dev, B43_PHY_G_CRS, ~0x4000); |
| break; |
| } |
| radio_stacksave(0x0078); |
| tmp = (b43_radio_read16(dev, 0x0078) & 0x001E); |
| B43_WARN_ON(tmp > 15); |
| flipped = bitrev4(tmp); |
| if (flipped < 10 && flipped >= 8) |
| flipped = 7; |
| else if (flipped >= 10) |
| flipped -= 3; |
| flipped = (bitrev4(flipped) << 1) | 0x0020; |
| b43_radio_write16(dev, 0x0078, flipped); |
| |
| b43_calc_nrssi_threshold(dev); |
| |
| phy_stacksave(0x0406); |
| b43_phy_write(dev, 0x0406, 0x7E28); |
| |
| b43_phy_set(dev, 0x042B, 0x0800); |
| b43_phy_set(dev, B43_PHY_RADIO_BITFIELD, 0x1000); |
| |
| phy_stacksave(0x04A0); |
| b43_phy_maskset(dev, 0x04A0, 0xC0C0, 0x0008); |
| phy_stacksave(0x04A1); |
| b43_phy_maskset(dev, 0x04A1, 0xC0C0, 0x0605); |
| phy_stacksave(0x04A2); |
| b43_phy_maskset(dev, 0x04A2, 0xC0C0, 0x0204); |
| phy_stacksave(0x04A8); |
| b43_phy_maskset(dev, 0x04A8, 0xC0C0, 0x0803); |
| phy_stacksave(0x04AB); |
| b43_phy_maskset(dev, 0x04AB, 0xC0C0, 0x0605); |
| |
| phy_stacksave(0x04A7); |
| b43_phy_write(dev, 0x04A7, 0x0002); |
| phy_stacksave(0x04A3); |
| b43_phy_write(dev, 0x04A3, 0x287A); |
| phy_stacksave(0x04A9); |
| b43_phy_write(dev, 0x04A9, 0x2027); |
| phy_stacksave(0x0493); |
| b43_phy_write(dev, 0x0493, 0x32F5); |
| phy_stacksave(0x04AA); |
| b43_phy_write(dev, 0x04AA, 0x2027); |
| phy_stacksave(0x04AC); |
| b43_phy_write(dev, 0x04AC, 0x32F5); |
| break; |
| case B43_INTERFMODE_MANUALWLAN: |
| if (b43_phy_read(dev, 0x0033) & 0x0800) |
| break; |
| |
| gphy->aci_enable = true; |
| |
| phy_stacksave(B43_PHY_RADIO_BITFIELD); |
| phy_stacksave(B43_PHY_G_CRS); |
| if (phy->rev < 2) { |
| phy_stacksave(0x0406); |
| } else { |
| phy_stacksave(0x04C0); |
| phy_stacksave(0x04C1); |
| } |
| phy_stacksave(0x0033); |
| phy_stacksave(0x04A7); |
| phy_stacksave(0x04A3); |
| phy_stacksave(0x04A9); |
| phy_stacksave(0x04AA); |
| phy_stacksave(0x04AC); |
| phy_stacksave(0x0493); |
| phy_stacksave(0x04A1); |
| phy_stacksave(0x04A0); |
| phy_stacksave(0x04A2); |
| phy_stacksave(0x048A); |
| phy_stacksave(0x04A8); |
| phy_stacksave(0x04AB); |
| if (phy->rev == 2) { |
| phy_stacksave(0x04AD); |
| phy_stacksave(0x04AE); |
| } else if (phy->rev >= 3) { |
| phy_stacksave(0x04AD); |
| phy_stacksave(0x0415); |
| phy_stacksave(0x0416); |
| phy_stacksave(0x0417); |
| ofdmtab_stacksave(0x1A00, 0x2); |
| ofdmtab_stacksave(0x1A00, 0x3); |
| } |
| phy_stacksave(0x042B); |
| phy_stacksave(0x048C); |
| |
| b43_phy_mask(dev, B43_PHY_RADIO_BITFIELD, ~0x1000); |
| b43_phy_maskset(dev, B43_PHY_G_CRS, 0xFFFC, 0x0002); |
| |
| b43_phy_write(dev, 0x0033, 0x0800); |
| b43_phy_write(dev, 0x04A3, 0x2027); |
| b43_phy_write(dev, 0x04A9, 0x1CA8); |
| b43_phy_write(dev, 0x0493, 0x287A); |
| b43_phy_write(dev, 0x04AA, 0x1CA8); |
| b43_phy_write(dev, 0x04AC, 0x287A); |
| |
| b43_phy_maskset(dev, 0x04A0, 0xFFC0, 0x001A); |
| b43_phy_write(dev, 0x04A7, 0x000D); |
| |
| if (phy->rev < 2) { |
| b43_phy_write(dev, 0x0406, 0xFF0D); |
| } else if (phy->rev == 2) { |
| b43_phy_write(dev, 0x04C0, 0xFFFF); |
| b43_phy_write(dev, 0x04C1, 0x00A9); |
| } else { |
| b43_phy_write(dev, 0x04C0, 0x00C1); |
| b43_phy_write(dev, 0x04C1, 0x0059); |
| } |
| |
| b43_phy_maskset(dev, 0x04A1, 0xC0FF, 0x1800); |
| b43_phy_maskset(dev, 0x04A1, 0xFFC0, 0x0015); |
| b43_phy_maskset(dev, 0x04A8, 0xCFFF, 0x1000); |
| b43_phy_maskset(dev, 0x04A8, 0xF0FF, 0x0A00); |
| b43_phy_maskset(dev, 0x04AB, 0xCFFF, 0x1000); |
| b43_phy_maskset(dev, 0x04AB, 0xF0FF, 0x0800); |
| b43_phy_maskset(dev, 0x04AB, 0xFFCF, 0x0010); |
| b43_phy_maskset(dev, 0x04AB, 0xFFF0, 0x0005); |
| b43_phy_maskset(dev, 0x04A8, 0xFFCF, 0x0010); |
| b43_phy_maskset(dev, 0x04A8, 0xFFF0, 0x0006); |
| b43_phy_maskset(dev, 0x04A2, 0xF0FF, 0x0800); |
| b43_phy_maskset(dev, 0x04A0, 0xF0FF, 0x0500); |
| b43_phy_maskset(dev, 0x04A2, 0xFFF0, 0x000B); |
| |
| if (phy->rev >= 3) { |
| b43_phy_mask(dev, 0x048A, 0x7FFF); |
| b43_phy_maskset(dev, 0x0415, 0x8000, 0x36D8); |
| b43_phy_maskset(dev, 0x0416, 0x8000, 0x36D8); |
| b43_phy_maskset(dev, 0x0417, 0xFE00, 0x016D); |
| } else { |
| b43_phy_set(dev, 0x048A, 0x1000); |
| b43_phy_maskset(dev, 0x048A, 0x9FFF, 0x2000); |
| b43_hf_write(dev, b43_hf_read(dev) | B43_HF_ACIW); |
| } |
| if (phy->rev >= 2) { |
| b43_phy_set(dev, 0x042B, 0x0800); |
| } |
| b43_phy_maskset(dev, 0x048C, 0xF0FF, 0x0200); |
| if (phy->rev == 2) { |
| b43_phy_maskset(dev, 0x04AE, 0xFF00, 0x007F); |
| b43_phy_maskset(dev, 0x04AD, 0x00FF, 0x1300); |
| } else if (phy->rev >= 6) { |
| b43_ofdmtab_write16(dev, 0x1A00, 0x3, 0x007F); |
| b43_ofdmtab_write16(dev, 0x1A00, 0x2, 0x007F); |
| b43_phy_mask(dev, 0x04AD, 0x00FF); |
| } |
| b43_calc_nrssi_slope(dev); |
| break; |
| default: |
| B43_WARN_ON(1); |
| } |
| } |
| |
| static void |
| b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| u32 *stack = gphy->interfstack; |
| |
| switch (mode) { |
| case B43_INTERFMODE_NONWLAN: |
| if (phy->rev != 1) { |
| b43_phy_mask(dev, 0x042B, ~0x0800); |
| b43_phy_set(dev, B43_PHY_G_CRS, 0x4000); |
| break; |
| } |
| radio_stackrestore(0x0078); |
| b43_calc_nrssi_threshold(dev); |
| phy_stackrestore(0x0406); |
| b43_phy_mask(dev, 0x042B, ~0x0800); |
| if (!dev->bad_frames_preempt) { |
| b43_phy_mask(dev, B43_PHY_RADIO_BITFIELD, ~(1 << 11)); |
| } |
| b43_phy_set(dev, B43_PHY_G_CRS, 0x4000); |
| phy_stackrestore(0x04A0); |
| phy_stackrestore(0x04A1); |
| phy_stackrestore(0x04A2); |
| phy_stackrestore(0x04A8); |
| phy_stackrestore(0x04AB); |
| phy_stackrestore(0x04A7); |
| phy_stackrestore(0x04A3); |
| phy_stackrestore(0x04A9); |
| phy_stackrestore(0x0493); |
| phy_stackrestore(0x04AA); |
| phy_stackrestore(0x04AC); |
| break; |
| case B43_INTERFMODE_MANUALWLAN: |
| if (!(b43_phy_read(dev, 0x0033) & 0x0800)) |
| break; |
| |
| gphy->aci_enable = false; |
| |
| phy_stackrestore(B43_PHY_RADIO_BITFIELD); |
| phy_stackrestore(B43_PHY_G_CRS); |
| phy_stackrestore(0x0033); |
| phy_stackrestore(0x04A3); |
| phy_stackrestore(0x04A9); |
| phy_stackrestore(0x0493); |
| phy_stackrestore(0x04AA); |
| phy_stackrestore(0x04AC); |
| phy_stackrestore(0x04A0); |
| phy_stackrestore(0x04A7); |
| if (phy->rev >= 2) { |
| phy_stackrestore(0x04C0); |
| phy_stackrestore(0x04C1); |
| } else |
| phy_stackrestore(0x0406); |
| phy_stackrestore(0x04A1); |
| phy_stackrestore(0x04AB); |
| phy_stackrestore(0x04A8); |
| if (phy->rev == 2) { |
| phy_stackrestore(0x04AD); |
| phy_stackrestore(0x04AE); |
| } else if (phy->rev >= 3) { |
| phy_stackrestore(0x04AD); |
| phy_stackrestore(0x0415); |
| phy_stackrestore(0x0416); |
| phy_stackrestore(0x0417); |
| ofdmtab_stackrestore(0x1A00, 0x2); |
| ofdmtab_stackrestore(0x1A00, 0x3); |
| } |
| phy_stackrestore(0x04A2); |
| phy_stackrestore(0x048A); |
| phy_stackrestore(0x042B); |
| phy_stackrestore(0x048C); |
| b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ACIW); |
| b43_calc_nrssi_slope(dev); |
| break; |
| default: |
| B43_WARN_ON(1); |
| } |
| } |
| |
| #undef phy_stacksave |
| #undef phy_stackrestore |
| #undef radio_stacksave |
| #undef radio_stackrestore |
| #undef ofdmtab_stacksave |
| #undef ofdmtab_stackrestore |
| |
| static u16 b43_radio_core_calibration_value(struct b43_wldev *dev) |
| { |
| u16 reg, index, ret; |
| |
| static const u8 rcc_table[] = { |
| 0x02, 0x03, 0x01, 0x0F, |
| 0x06, 0x07, 0x05, 0x0F, |
| 0x0A, 0x0B, 0x09, 0x0F, |
| 0x0E, 0x0F, 0x0D, 0x0F, |
| }; |
| |
| reg = b43_radio_read16(dev, 0x60); |
| index = (reg & 0x001E) >> 1; |
| ret = rcc_table[index] << 1; |
| ret |= (reg & 0x0001); |
| ret |= 0x0020; |
| |
| return ret; |
| } |
| |
| #define LPD(L, P, D) (((L) << 2) | ((P) << 1) | ((D) << 0)) |
| static u16 radio2050_rfover_val(struct b43_wldev *dev, |
| u16 phy_register, unsigned int lpd) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| struct ssb_sprom *sprom = dev->dev->bus_sprom; |
| |
| if (!phy->gmode) |
| return 0; |
| |
| if (has_loopback_gain(phy)) { |
| int max_lb_gain = gphy->max_lb_gain; |
| u16 extlna; |
| u16 i; |
| |
| if (phy->radio_rev == 8) |
| max_lb_gain += 0x3E; |
| else |
| max_lb_gain += 0x26; |
| if (max_lb_gain >= 0x46) { |
| extlna = 0x3000; |
| max_lb_gain -= 0x46; |
| } else if (max_lb_gain >= 0x3A) { |
| extlna = 0x1000; |
| max_lb_gain -= 0x3A; |
| } else if (max_lb_gain >= 0x2E) { |
| extlna = 0x2000; |
| max_lb_gain -= 0x2E; |
| } else { |
| extlna = 0; |
| max_lb_gain -= 0x10; |
| } |
| |
| for (i = 0; i < 16; i++) { |
| max_lb_gain -= (i * 6); |
| if (max_lb_gain < 6) |
| break; |
| } |
| |
| if ((phy->rev < 7) || |
| !(sprom->boardflags_lo & B43_BFL_EXTLNA)) { |
| if (phy_register == B43_PHY_RFOVER) { |
| return 0x1B3; |
| } else if (phy_register == B43_PHY_RFOVERVAL) { |
| extlna |= (i << 8); |
| switch (lpd) { |
| case LPD(0, 1, 1): |
| return 0x0F92; |
| case LPD(0, 0, 1): |
| case LPD(1, 0, 1): |
| return (0x0092 | extlna); |
| case LPD(1, 0, 0): |
| return (0x0093 | extlna); |
| } |
| B43_WARN_ON(1); |
| } |
| B43_WARN_ON(1); |
| } else { |
| if (phy_register == B43_PHY_RFOVER) { |
| return 0x9B3; |
| } else if (phy_register == B43_PHY_RFOVERVAL) { |
| if (extlna) |
| extlna |= 0x8000; |
| extlna |= (i << 8); |
| switch (lpd) { |
| case LPD(0, 1, 1): |
| return 0x8F92; |
| case LPD(0, 0, 1): |
| return (0x8092 | extlna); |
| case LPD(1, 0, 1): |
| return (0x2092 | extlna); |
| case LPD(1, 0, 0): |
| return (0x2093 | extlna); |
| } |
| B43_WARN_ON(1); |
| } |
| B43_WARN_ON(1); |
| } |
| } else { |
| if ((phy->rev < 7) || |
| !(sprom->boardflags_lo & B43_BFL_EXTLNA)) { |
| if (phy_register == B43_PHY_RFOVER) { |
| return 0x1B3; |
| } else if (phy_register == B43_PHY_RFOVERVAL) { |
| switch (lpd) { |
| case LPD(0, 1, 1): |
| return 0x0FB2; |
| case LPD(0, 0, 1): |
| return 0x00B2; |
| case LPD(1, 0, 1): |
| return 0x30B2; |
| case LPD(1, 0, 0): |
| return 0x30B3; |
| } |
| B43_WARN_ON(1); |
| } |
| B43_WARN_ON(1); |
| } else { |
| if (phy_register == B43_PHY_RFOVER) { |
| return 0x9B3; |
| } else if (phy_register == B43_PHY_RFOVERVAL) { |
| switch (lpd) { |
| case LPD(0, 1, 1): |
| return 0x8FB2; |
| case LPD(0, 0, 1): |
| return 0x80B2; |
| case LPD(1, 0, 1): |
| return 0x20B2; |
| case LPD(1, 0, 0): |
| return 0x20B3; |
| } |
| B43_WARN_ON(1); |
| } |
| B43_WARN_ON(1); |
| } |
| } |
| return 0; |
| } |
| |
| struct init2050_saved_values { |
| /* Core registers */ |
| u16 reg_3EC; |
| u16 reg_3E6; |
| u16 reg_3F4; |
| /* Radio registers */ |
| u16 radio_43; |
| u16 radio_51; |
| u16 radio_52; |
| /* PHY registers */ |
| u16 phy_pgactl; |
| u16 phy_cck_5A; |
| u16 phy_cck_59; |
| u16 phy_cck_58; |
| u16 phy_cck_30; |
| u16 phy_rfover; |
| u16 phy_rfoverval; |
| u16 phy_analogover; |
| u16 phy_analogoverval; |
| u16 phy_crs0; |
| u16 phy_classctl; |
| u16 phy_lo_mask; |
| u16 phy_lo_ctl; |
| u16 phy_syncctl; |
| }; |
| |
| static u16 b43_radio_init2050(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct init2050_saved_values sav; |
| u16 rcc; |
| u16 radio78; |
| u16 ret; |
| u16 i, j; |
| u32 tmp1 = 0, tmp2 = 0; |
| |
| memset(&sav, 0, sizeof(sav)); /* get rid of "may be used uninitialized..." */ |
| |
| sav.radio_43 = b43_radio_read16(dev, 0x43); |
| sav.radio_51 = b43_radio_read16(dev, 0x51); |
| sav.radio_52 = b43_radio_read16(dev, 0x52); |
| sav.phy_pgactl = b43_phy_read(dev, B43_PHY_PGACTL); |
| sav.phy_cck_5A = b43_phy_read(dev, B43_PHY_CCK(0x5A)); |
| sav.phy_cck_59 = b43_phy_read(dev, B43_PHY_CCK(0x59)); |
| sav.phy_cck_58 = b43_phy_read(dev, B43_PHY_CCK(0x58)); |
| |
| if (phy->type == B43_PHYTYPE_B) { |
| sav.phy_cck_30 = b43_phy_read(dev, B43_PHY_CCK(0x30)); |
| sav.reg_3EC = b43_read16(dev, 0x3EC); |
| |
| b43_phy_write(dev, B43_PHY_CCK(0x30), 0xFF); |
| b43_write16(dev, 0x3EC, 0x3F3F); |
| } else if (phy->gmode || phy->rev >= 2) { |
| sav.phy_rfover = b43_phy_read(dev, B43_PHY_RFOVER); |
| sav.phy_rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL); |
| sav.phy_analogover = b43_phy_read(dev, B43_PHY_ANALOGOVER); |
| sav.phy_analogoverval = |
| b43_phy_read(dev, B43_PHY_ANALOGOVERVAL); |
| sav.phy_crs0 = b43_phy_read(dev, B43_PHY_CRS0); |
| sav.phy_classctl = b43_phy_read(dev, B43_PHY_CLASSCTL); |
| |
| b43_phy_set(dev, B43_PHY_ANALOGOVER, 0x0003); |
| b43_phy_mask(dev, B43_PHY_ANALOGOVERVAL, 0xFFFC); |
| b43_phy_mask(dev, B43_PHY_CRS0, 0x7FFF); |
| b43_phy_mask(dev, B43_PHY_CLASSCTL, 0xFFFC); |
| if (has_loopback_gain(phy)) { |
| sav.phy_lo_mask = b43_phy_read(dev, B43_PHY_LO_MASK); |
| sav.phy_lo_ctl = b43_phy_read(dev, B43_PHY_LO_CTL); |
| |
| if (phy->rev >= 3) |
| b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020); |
| else |
| b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020); |
| b43_phy_write(dev, B43_PHY_LO_CTL, 0); |
| } |
| |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, B43_PHY_RFOVERVAL, |
| LPD(0, 1, 1))); |
| b43_phy_write(dev, B43_PHY_RFOVER, |
| radio2050_rfover_val(dev, B43_PHY_RFOVER, 0)); |
| } |
| b43_write16(dev, 0x3E2, b43_read16(dev, 0x3E2) | 0x8000); |
| |
| sav.phy_syncctl = b43_phy_read(dev, B43_PHY_SYNCCTL); |
| b43_phy_mask(dev, B43_PHY_SYNCCTL, 0xFF7F); |
| sav.reg_3E6 = b43_read16(dev, 0x3E6); |
| sav.reg_3F4 = b43_read16(dev, 0x3F4); |
| |
| if (phy->analog == 0) { |
| b43_write16(dev, 0x03E6, 0x0122); |
| } else { |
| if (phy->analog >= 2) { |
| b43_phy_maskset(dev, B43_PHY_CCK(0x03), 0xFFBF, 0x40); |
| } |
| b43_write16(dev, B43_MMIO_CHANNEL_EXT, |
| (b43_read16(dev, B43_MMIO_CHANNEL_EXT) | 0x2000)); |
| } |
| |
| rcc = b43_radio_core_calibration_value(dev); |
| |
| if (phy->type == B43_PHYTYPE_B) |
| b43_radio_write16(dev, 0x78, 0x26); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, B43_PHY_RFOVERVAL, |
| LPD(0, 1, 1))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xBFAF); |
| b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x1403); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, B43_PHY_RFOVERVAL, |
| LPD(0, 0, 1))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xBFA0); |
| b43_radio_set(dev, 0x51, 0x0004); |
| if (phy->radio_rev == 8) { |
| b43_radio_write16(dev, 0x43, 0x1F); |
| } else { |
| b43_radio_write16(dev, 0x52, 0); |
| b43_radio_maskset(dev, 0x43, 0xFFF0, 0x0009); |
| } |
| b43_phy_write(dev, B43_PHY_CCK(0x58), 0); |
| |
| for (i = 0; i < 16; i++) { |
| b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0480); |
| b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810); |
| b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, |
| B43_PHY_RFOVERVAL, |
| LPD(1, 0, 1))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xAFB0); |
| udelay(10); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, |
| B43_PHY_RFOVERVAL, |
| LPD(1, 0, 1))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xEFB0); |
| udelay(10); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, |
| B43_PHY_RFOVERVAL, |
| LPD(1, 0, 0))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xFFF0); |
| udelay(20); |
| tmp1 += b43_phy_read(dev, B43_PHY_LO_LEAKAGE); |
| b43_phy_write(dev, B43_PHY_CCK(0x58), 0); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, |
| B43_PHY_RFOVERVAL, |
| LPD(1, 0, 1))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xAFB0); |
| } |
| udelay(10); |
| |
| b43_phy_write(dev, B43_PHY_CCK(0x58), 0); |
| tmp1++; |
| tmp1 >>= 9; |
| |
| for (i = 0; i < 16; i++) { |
| radio78 = (bitrev4(i) << 1) | 0x0020; |
| b43_radio_write16(dev, 0x78, radio78); |
| udelay(10); |
| for (j = 0; j < 16; j++) { |
| b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0D80); |
| b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810); |
| b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, |
| B43_PHY_RFOVERVAL, |
| LPD(1, 0, |
| 1))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xAFB0); |
| udelay(10); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, |
| B43_PHY_RFOVERVAL, |
| LPD(1, 0, |
| 1))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xEFB0); |
| udelay(10); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, |
| B43_PHY_RFOVERVAL, |
| LPD(1, 0, |
| 0))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xFFF0); |
| udelay(10); |
| tmp2 += b43_phy_read(dev, B43_PHY_LO_LEAKAGE); |
| b43_phy_write(dev, B43_PHY_CCK(0x58), 0); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| radio2050_rfover_val(dev, |
| B43_PHY_RFOVERVAL, |
| LPD(1, 0, |
| 1))); |
| } |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xAFB0); |
| } |
| tmp2++; |
| tmp2 >>= 8; |
| if (tmp1 < tmp2) |
| break; |
| } |
| |
| /* Restore the registers */ |
| b43_phy_write(dev, B43_PHY_PGACTL, sav.phy_pgactl); |
| b43_radio_write16(dev, 0x51, sav.radio_51); |
| b43_radio_write16(dev, 0x52, sav.radio_52); |
| b43_radio_write16(dev, 0x43, sav.radio_43); |
| b43_phy_write(dev, B43_PHY_CCK(0x5A), sav.phy_cck_5A); |
| b43_phy_write(dev, B43_PHY_CCK(0x59), sav.phy_cck_59); |
| b43_phy_write(dev, B43_PHY_CCK(0x58), sav.phy_cck_58); |
| b43_write16(dev, 0x3E6, sav.reg_3E6); |
| if (phy->analog != 0) |
| b43_write16(dev, 0x3F4, sav.reg_3F4); |
| b43_phy_write(dev, B43_PHY_SYNCCTL, sav.phy_syncctl); |
| b43_synth_pu_workaround(dev, phy->channel); |
| if (phy->type == B43_PHYTYPE_B) { |
| b43_phy_write(dev, B43_PHY_CCK(0x30), sav.phy_cck_30); |
| b43_write16(dev, 0x3EC, sav.reg_3EC); |
| } else if (phy->gmode) { |
| b43_write16(dev, B43_MMIO_PHY_RADIO, |
| b43_read16(dev, B43_MMIO_PHY_RADIO) |
| & 0x7FFF); |
| b43_phy_write(dev, B43_PHY_RFOVER, sav.phy_rfover); |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, sav.phy_rfoverval); |
| b43_phy_write(dev, B43_PHY_ANALOGOVER, sav.phy_analogover); |
| b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, |
| sav.phy_analogoverval); |
| b43_phy_write(dev, B43_PHY_CRS0, sav.phy_crs0); |
| b43_phy_write(dev, B43_PHY_CLASSCTL, sav.phy_classctl); |
| if (has_loopback_gain(phy)) { |
| b43_phy_write(dev, B43_PHY_LO_MASK, sav.phy_lo_mask); |
| b43_phy_write(dev, B43_PHY_LO_CTL, sav.phy_lo_ctl); |
| } |
| } |
| if (i > 15) |
| ret = radio78; |
| else |
| ret = rcc; |
| |
| return ret; |
| } |
| |
| static void b43_phy_initb5(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| u16 offset, value; |
| u8 old_channel; |
| |
| if (phy->analog == 1) { |
| b43_radio_set(dev, 0x007A, 0x0050); |
| } |
| if ((dev->dev->board_vendor != SSB_BOARDVENDOR_BCM) && |
| (dev->dev->board_type != SSB_BOARD_BU4306)) { |
| value = 0x2120; |
| for (offset = 0x00A8; offset < 0x00C7; offset++) { |
| b43_phy_write(dev, offset, value); |
| value += 0x202; |
| } |
| } |
| b43_phy_maskset(dev, 0x0035, 0xF0FF, 0x0700); |
| if (phy->radio_ver == 0x2050) |
| b43_phy_write(dev, 0x0038, 0x0667); |
| |
| if (phy->gmode || phy->rev >= 2) { |
| if (phy->radio_ver == 0x2050) { |
| b43_radio_set(dev, 0x007A, 0x0020); |
| b43_radio_set(dev, 0x0051, 0x0004); |
| } |
| b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000); |
| |
| b43_phy_set(dev, 0x0802, 0x0100); |
| b43_phy_set(dev, 0x042B, 0x2000); |
| |
| b43_phy_write(dev, 0x001C, 0x186A); |
| |
| b43_phy_maskset(dev, 0x0013, 0x00FF, 0x1900); |
| b43_phy_maskset(dev, 0x0035, 0xFFC0, 0x0064); |
| b43_phy_maskset(dev, 0x005D, 0xFF80, 0x000A); |
| } |
| |
| if (dev->bad_frames_preempt) { |
| b43_phy_set(dev, B43_PHY_RADIO_BITFIELD, (1 << 11)); |
| } |
| |
| if (phy->analog == 1) { |
| b43_phy_write(dev, 0x0026, 0xCE00); |
| b43_phy_write(dev, 0x0021, 0x3763); |
| b43_phy_write(dev, 0x0022, 0x1BC3); |
| b43_phy_write(dev, 0x0023, 0x06F9); |
| b43_phy_write(dev, 0x0024, 0x037E); |
| } else |
| b43_phy_write(dev, 0x0026, 0xCC00); |
| b43_phy_write(dev, 0x0030, 0x00C6); |
| b43_write16(dev, 0x03EC, 0x3F22); |
| |
| if (phy->analog == 1) |
| b43_phy_write(dev, 0x0020, 0x3E1C); |
| else |
| b43_phy_write(dev, 0x0020, 0x301C); |
| |
| if (phy->analog == 0) |
| b43_write16(dev, 0x03E4, 0x3000); |
| |
| old_channel = phy->channel; |
| /* Force to channel 7, even if not supported. */ |
| b43_gphy_channel_switch(dev, 7, 0); |
| |
| if (phy->radio_ver != 0x2050) { |
| b43_radio_write16(dev, 0x0075, 0x0080); |
| b43_radio_write16(dev, 0x0079, 0x0081); |
| } |
| |
| b43_radio_write16(dev, 0x0050, 0x0020); |
| b43_radio_write16(dev, 0x0050, 0x0023); |
| |
| if (phy->radio_ver == 0x2050) { |
| b43_radio_write16(dev, 0x0050, 0x0020); |
| b43_radio_write16(dev, 0x005A, 0x0070); |
| } |
| |
| b43_radio_write16(dev, 0x005B, 0x007B); |
| b43_radio_write16(dev, 0x005C, 0x00B0); |
| |
| b43_radio_set(dev, 0x007A, 0x0007); |
| |
| b43_gphy_channel_switch(dev, old_channel, 0); |
| |
| b43_phy_write(dev, 0x0014, 0x0080); |
| b43_phy_write(dev, 0x0032, 0x00CA); |
| b43_phy_write(dev, 0x002A, 0x88A3); |
| |
| b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control); |
| |
| if (phy->radio_ver == 0x2050) |
| b43_radio_write16(dev, 0x005D, 0x000D); |
| |
| b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004); |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/802.11/PHY/Init/B6 */ |
| static void b43_phy_initb6(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| u16 offset, val; |
| u8 old_channel; |
| |
| b43_phy_write(dev, 0x003E, 0x817A); |
| b43_radio_write16(dev, 0x007A, |
| (b43_radio_read16(dev, 0x007A) | 0x0058)); |
| if (phy->radio_rev == 4 || phy->radio_rev == 5) { |
| b43_radio_write16(dev, 0x51, 0x37); |
| b43_radio_write16(dev, 0x52, 0x70); |
| b43_radio_write16(dev, 0x53, 0xB3); |
| b43_radio_write16(dev, 0x54, 0x9B); |
| b43_radio_write16(dev, 0x5A, 0x88); |
| b43_radio_write16(dev, 0x5B, 0x88); |
| b43_radio_write16(dev, 0x5D, 0x88); |
| b43_radio_write16(dev, 0x5E, 0x88); |
| b43_radio_write16(dev, 0x7D, 0x88); |
| b43_hf_write(dev, b43_hf_read(dev) |
| | B43_HF_TSSIRPSMW); |
| } |
| B43_WARN_ON(phy->radio_rev == 6 || phy->radio_rev == 7); /* We had code for these revs here... */ |
| if (phy->radio_rev == 8) { |
| b43_radio_write16(dev, 0x51, 0); |
| b43_radio_write16(dev, 0x52, 0x40); |
| b43_radio_write16(dev, 0x53, 0xB7); |
| b43_radio_write16(dev, 0x54, 0x98); |
| b43_radio_write16(dev, 0x5A, 0x88); |
| b43_radio_write16(dev, 0x5B, 0x6B); |
| b43_radio_write16(dev, 0x5C, 0x0F); |
| if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_ALTIQ) { |
| b43_radio_write16(dev, 0x5D, 0xFA); |
| b43_radio_write16(dev, 0x5E, 0xD8); |
| } else { |
| b43_radio_write16(dev, 0x5D, 0xF5); |
| b43_radio_write16(dev, 0x5E, 0xB8); |
| } |
| b43_radio_write16(dev, 0x0073, 0x0003); |
| b43_radio_write16(dev, 0x007D, 0x00A8); |
| b43_radio_write16(dev, 0x007C, 0x0001); |
| b43_radio_write16(dev, 0x007E, 0x0008); |
| } |
| val = 0x1E1F; |
| for (offset = 0x0088; offset < 0x0098; offset++) { |
| b43_phy_write(dev, offset, val); |
| val -= 0x0202; |
| } |
| val = 0x3E3F; |
| for (offset = 0x0098; offset < 0x00A8; offset++) { |
| b43_phy_write(dev, offset, val); |
| val -= 0x0202; |
| } |
| val = 0x2120; |
| for (offset = 0x00A8; offset < 0x00C8; offset++) { |
| b43_phy_write(dev, offset, (val & 0x3F3F)); |
| val += 0x0202; |
| } |
| if (phy->type == B43_PHYTYPE_G) { |
| b43_radio_set(dev, 0x007A, 0x0020); |
| b43_radio_set(dev, 0x0051, 0x0004); |
| b43_phy_set(dev, 0x0802, 0x0100); |
| b43_phy_set(dev, 0x042B, 0x2000); |
| b43_phy_write(dev, 0x5B, 0); |
| b43_phy_write(dev, 0x5C, 0); |
| } |
| |
| old_channel = phy->channel; |
| if (old_channel >= 8) |
| b43_gphy_channel_switch(dev, 1, 0); |
| else |
| b43_gphy_channel_switch(dev, 13, 0); |
| |
| b43_radio_write16(dev, 0x0050, 0x0020); |
| b43_radio_write16(dev, 0x0050, 0x0023); |
| udelay(40); |
| if (phy->radio_rev < 6 || phy->radio_rev == 8) { |
| b43_radio_write16(dev, 0x7C, (b43_radio_read16(dev, 0x7C) |
| | 0x0002)); |
| b43_radio_write16(dev, 0x50, 0x20); |
| } |
| if (phy->radio_rev <= 2) { |
| b43_radio_write16(dev, 0x50, 0x20); |
| b43_radio_write16(dev, 0x5A, 0x70); |
| b43_radio_write16(dev, 0x5B, 0x7B); |
| b43_radio_write16(dev, 0x5C, 0xB0); |
| } |
| b43_radio_maskset(dev, 0x007A, 0x00F8, 0x0007); |
| |
| b43_gphy_channel_switch(dev, old_channel, 0); |
| |
| b43_phy_write(dev, 0x0014, 0x0200); |
| if (phy->radio_rev >= 6) |
| b43_phy_write(dev, 0x2A, 0x88C2); |
| else |
| b43_phy_write(dev, 0x2A, 0x8AC0); |
| b43_phy_write(dev, 0x0038, 0x0668); |
| b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control); |
| if (phy->radio_rev == 4 || phy->radio_rev == 5) |
| b43_phy_maskset(dev, 0x5D, 0xFF80, 0x0003); |
| if (phy->radio_rev <= 2) |
| b43_radio_write16(dev, 0x005D, 0x000D); |
| |
| if (phy->analog == 4) { |
| b43_write16(dev, 0x3E4, 9); |
| b43_phy_mask(dev, 0x61, 0x0FFF); |
| } else { |
| b43_phy_maskset(dev, 0x0002, 0xFFC0, 0x0004); |
| } |
| if (phy->type == B43_PHYTYPE_B) |
| B43_WARN_ON(1); |
| else if (phy->type == B43_PHYTYPE_G) |
| b43_write16(dev, 0x03E6, 0x0); |
| } |
| |
| static void b43_calc_loopback_gain(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| u16 backup_phy[16] = { 0 }; |
| u16 backup_radio[3]; |
| u16 backup_bband; |
| u16 i, j, loop_i_max; |
| u16 trsw_rx; |
| u16 loop1_outer_done, loop1_inner_done; |
| |
| backup_phy[0] = b43_phy_read(dev, B43_PHY_CRS0); |
| backup_phy[1] = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); |
| backup_phy[2] = b43_phy_read(dev, B43_PHY_RFOVER); |
| backup_phy[3] = b43_phy_read(dev, B43_PHY_RFOVERVAL); |
| if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ |
| backup_phy[4] = b43_phy_read(dev, B43_PHY_ANALOGOVER); |
| backup_phy[5] = b43_phy_read(dev, B43_PHY_ANALOGOVERVAL); |
| } |
| backup_phy[6] = b43_phy_read(dev, B43_PHY_CCK(0x5A)); |
| backup_phy[7] = b43_phy_read(dev, B43_PHY_CCK(0x59)); |
| backup_phy[8] = b43_phy_read(dev, B43_PHY_CCK(0x58)); |
| backup_phy[9] = b43_phy_read(dev, B43_PHY_CCK(0x0A)); |
| backup_phy[10] = b43_phy_read(dev, B43_PHY_CCK(0x03)); |
| backup_phy[11] = b43_phy_read(dev, B43_PHY_LO_MASK); |
| backup_phy[12] = b43_phy_read(dev, B43_PHY_LO_CTL); |
| backup_phy[13] = b43_phy_read(dev, B43_PHY_CCK(0x2B)); |
| backup_phy[14] = b43_phy_read(dev, B43_PHY_PGACTL); |
| backup_phy[15] = b43_phy_read(dev, B43_PHY_LO_LEAKAGE); |
| backup_bband = gphy->bbatt.att; |
| backup_radio[0] = b43_radio_read16(dev, 0x52); |
| backup_radio[1] = b43_radio_read16(dev, 0x43); |
| backup_radio[2] = b43_radio_read16(dev, 0x7A); |
| |
| b43_phy_mask(dev, B43_PHY_CRS0, 0x3FFF); |
| b43_phy_set(dev, B43_PHY_CCKBBANDCFG, 0x8000); |
| b43_phy_set(dev, B43_PHY_RFOVER, 0x0002); |
| b43_phy_mask(dev, B43_PHY_RFOVERVAL, 0xFFFD); |
| b43_phy_set(dev, B43_PHY_RFOVER, 0x0001); |
| b43_phy_mask(dev, B43_PHY_RFOVERVAL, 0xFFFE); |
| if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ |
| b43_phy_set(dev, B43_PHY_ANALOGOVER, 0x0001); |
| b43_phy_mask(dev, B43_PHY_ANALOGOVERVAL, 0xFFFE); |
| b43_phy_set(dev, B43_PHY_ANALOGOVER, 0x0002); |
| b43_phy_mask(dev, B43_PHY_ANALOGOVERVAL, 0xFFFD); |
| } |
| b43_phy_set(dev, B43_PHY_RFOVER, 0x000C); |
| b43_phy_set(dev, B43_PHY_RFOVERVAL, 0x000C); |
| b43_phy_set(dev, B43_PHY_RFOVER, 0x0030); |
| b43_phy_maskset(dev, B43_PHY_RFOVERVAL, 0xFFCF, 0x10); |
| |
| b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0780); |
| b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810); |
| b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D); |
| |
| b43_phy_set(dev, B43_PHY_CCK(0x0A), 0x2000); |
| if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ |
| b43_phy_set(dev, B43_PHY_ANALOGOVER, 0x0004); |
| b43_phy_mask(dev, B43_PHY_ANALOGOVERVAL, 0xFFFB); |
| } |
| b43_phy_maskset(dev, B43_PHY_CCK(0x03), 0xFF9F, 0x40); |
| |
| if (phy->radio_rev == 8) { |
| b43_radio_write16(dev, 0x43, 0x000F); |
| } else { |
| b43_radio_write16(dev, 0x52, 0); |
| b43_radio_maskset(dev, 0x43, 0xFFF0, 0x9); |
| } |
| b43_gphy_set_baseband_attenuation(dev, 11); |
| |
| if (phy->rev >= 3) |
| b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020); |
| else |
| b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020); |
| b43_phy_write(dev, B43_PHY_LO_CTL, 0); |
| |
| b43_phy_maskset(dev, B43_PHY_CCK(0x2B), 0xFFC0, 0x01); |
| b43_phy_maskset(dev, B43_PHY_CCK(0x2B), 0xC0FF, 0x800); |
| |
| b43_phy_set(dev, B43_PHY_RFOVER, 0x0100); |
| b43_phy_mask(dev, B43_PHY_RFOVERVAL, 0xCFFF); |
| |
| if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_EXTLNA) { |
| if (phy->rev >= 7) { |
| b43_phy_set(dev, B43_PHY_RFOVER, 0x0800); |
| b43_phy_set(dev, B43_PHY_RFOVERVAL, 0x8000); |
| } |
| } |
| b43_radio_mask(dev, 0x7A, 0x00F7); |
| |
| j = 0; |
| loop_i_max = (phy->radio_rev == 8) ? 15 : 9; |
| for (i = 0; i < loop_i_max; i++) { |
| for (j = 0; j < 16; j++) { |
| b43_radio_write16(dev, 0x43, i); |
| b43_phy_maskset(dev, B43_PHY_RFOVERVAL, 0xF0FF, (j << 8)); |
| b43_phy_maskset(dev, B43_PHY_PGACTL, 0x0FFF, 0xA000); |
| b43_phy_set(dev, B43_PHY_PGACTL, 0xF000); |
| udelay(20); |
| if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) |
| goto exit_loop1; |
| } |
| } |
| exit_loop1: |
| loop1_outer_done = i; |
| loop1_inner_done = j; |
| if (j >= 8) { |
| b43_phy_set(dev, B43_PHY_RFOVERVAL, 0x30); |
| trsw_rx = 0x1B; |
| for (j = j - 8; j < 16; j++) { |
| b43_phy_maskset(dev, B43_PHY_RFOVERVAL, 0xF0FF, (j << 8)); |
| b43_phy_maskset(dev, B43_PHY_PGACTL, 0x0FFF, 0xA000); |
| b43_phy_set(dev, B43_PHY_PGACTL, 0xF000); |
| udelay(20); |
| trsw_rx -= 3; |
| if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) |
| goto exit_loop2; |
| } |
| } else |
| trsw_rx = 0x18; |
| exit_loop2: |
| |
| if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ |
| b43_phy_write(dev, B43_PHY_ANALOGOVER, backup_phy[4]); |
| b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, backup_phy[5]); |
| } |
| b43_phy_write(dev, B43_PHY_CCK(0x5A), backup_phy[6]); |
| b43_phy_write(dev, B43_PHY_CCK(0x59), backup_phy[7]); |
| b43_phy_write(dev, B43_PHY_CCK(0x58), backup_phy[8]); |
| b43_phy_write(dev, B43_PHY_CCK(0x0A), backup_phy[9]); |
| b43_phy_write(dev, B43_PHY_CCK(0x03), backup_phy[10]); |
| b43_phy_write(dev, B43_PHY_LO_MASK, backup_phy[11]); |
| b43_phy_write(dev, B43_PHY_LO_CTL, backup_phy[12]); |
| b43_phy_write(dev, B43_PHY_CCK(0x2B), backup_phy[13]); |
| b43_phy_write(dev, B43_PHY_PGACTL, backup_phy[14]); |
| |
| b43_gphy_set_baseband_attenuation(dev, backup_bband); |
| |
| b43_radio_write16(dev, 0x52, backup_radio[0]); |
| b43_radio_write16(dev, 0x43, backup_radio[1]); |
| b43_radio_write16(dev, 0x7A, backup_radio[2]); |
| |
| b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2] | 0x0003); |
| udelay(10); |
| b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2]); |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, backup_phy[3]); |
| b43_phy_write(dev, B43_PHY_CRS0, backup_phy[0]); |
| b43_phy_write(dev, B43_PHY_CCKBBANDCFG, backup_phy[1]); |
| |
| gphy->max_lb_gain = |
| ((loop1_inner_done * 6) - (loop1_outer_done * 4)) - 11; |
| gphy->trsw_rx_gain = trsw_rx * 2; |
| } |
| |
| static void b43_hardware_pctl_early_init(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| if (!b43_has_hardware_pctl(dev)) { |
| b43_phy_write(dev, 0x047A, 0xC111); |
| return; |
| } |
| |
| b43_phy_mask(dev, 0x0036, 0xFEFF); |
| b43_phy_write(dev, 0x002F, 0x0202); |
| b43_phy_set(dev, 0x047C, 0x0002); |
| b43_phy_set(dev, 0x047A, 0xF000); |
| if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { |
| b43_phy_maskset(dev, 0x047A, 0xFF0F, 0x0010); |
| b43_phy_set(dev, 0x005D, 0x8000); |
| b43_phy_maskset(dev, 0x004E, 0xFFC0, 0x0010); |
| b43_phy_write(dev, 0x002E, 0xC07F); |
| b43_phy_set(dev, 0x0036, 0x0400); |
| } else { |
| b43_phy_set(dev, 0x0036, 0x0200); |
| b43_phy_set(dev, 0x0036, 0x0400); |
| b43_phy_mask(dev, 0x005D, 0x7FFF); |
| b43_phy_mask(dev, 0x004F, 0xFFFE); |
| b43_phy_maskset(dev, 0x004E, 0xFFC0, 0x0010); |
| b43_phy_write(dev, 0x002E, 0xC07F); |
| b43_phy_maskset(dev, 0x047A, 0xFF0F, 0x0010); |
| } |
| } |
| |
| /* Hardware power control for G-PHY */ |
| static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| |
| if (!b43_has_hardware_pctl(dev)) { |
| /* No hardware power control */ |
| b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_HWPCTL); |
| return; |
| } |
| |
| b43_phy_maskset(dev, 0x0036, 0xFFC0, (gphy->tgt_idle_tssi - gphy->cur_idle_tssi)); |
| b43_phy_maskset(dev, 0x0478, 0xFF00, (gphy->tgt_idle_tssi - gphy->cur_idle_tssi)); |
| b43_gphy_tssi_power_lt_init(dev); |
| b43_gphy_gain_lt_init(dev); |
| b43_phy_mask(dev, 0x0060, 0xFFBF); |
| b43_phy_write(dev, 0x0014, 0x0000); |
| |
| B43_WARN_ON(phy->rev < 6); |
| b43_phy_set(dev, 0x0478, 0x0800); |
| b43_phy_mask(dev, 0x0478, 0xFEFF); |
| b43_phy_mask(dev, 0x0801, 0xFFBF); |
| |
| b43_gphy_dc_lt_init(dev, 1); |
| |
| /* Enable hardware pctl in firmware. */ |
| b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL); |
| } |
| |
| /* Initialize B/G PHY power control */ |
| static void b43_phy_init_pctl(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| struct b43_rfatt old_rfatt; |
| struct b43_bbatt old_bbatt; |
| u8 old_tx_control = 0; |
| |
| B43_WARN_ON(phy->type != B43_PHYTYPE_G); |
| |
| if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && |
| (dev->dev->board_type == SSB_BOARD_BU4306)) |
| return; |
| |
| b43_phy_write(dev, 0x0028, 0x8018); |
| |
| /* This does something with the Analog... */ |
| b43_write16(dev, B43_MMIO_PHY0, b43_read16(dev, B43_MMIO_PHY0) |
| & 0xFFDF); |
| |
| if (!phy->gmode) |
| return; |
| b43_hardware_pctl_early_init(dev); |
| if (gphy->cur_idle_tssi == 0) { |
| if (phy->radio_ver == 0x2050 && phy->analog == 0) { |
| b43_radio_maskset(dev, 0x0076, 0x00F7, 0x0084); |
| } else { |
| struct b43_rfatt rfatt; |
| struct b43_bbatt bbatt; |
| |
| memcpy(&old_rfatt, &gphy->rfatt, sizeof(old_rfatt)); |
| memcpy(&old_bbatt, &gphy->bbatt, sizeof(old_bbatt)); |
| old_tx_control = gphy->tx_control; |
| |
| bbatt.att = 11; |
| if (phy->radio_rev == 8) { |
| rfatt.att = 15; |
| rfatt.with_padmix = true; |
| } else { |
| rfatt.att = 9; |
| rfatt.with_padmix = false; |
| } |
| b43_set_txpower_g(dev, &bbatt, &rfatt, 0); |
| } |
| b43_dummy_transmission(dev, false, true); |
| gphy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI); |
| if (B43_DEBUG) { |
| /* Current-Idle-TSSI sanity check. */ |
| if (abs(gphy->cur_idle_tssi - gphy->tgt_idle_tssi) >= 20) { |
| b43dbg(dev->wl, |
| "!WARNING! Idle-TSSI phy->cur_idle_tssi " |
| "measuring failed. (cur=%d, tgt=%d). Disabling TX power " |
| "adjustment.\n", gphy->cur_idle_tssi, |
| gphy->tgt_idle_tssi); |
| gphy->cur_idle_tssi = 0; |
| } |
| } |
| if (phy->radio_ver == 0x2050 && phy->analog == 0) { |
| b43_radio_mask(dev, 0x0076, 0xFF7B); |
| } else { |
| b43_set_txpower_g(dev, &old_bbatt, |
| &old_rfatt, old_tx_control); |
| } |
| } |
| b43_hardware_pctl_init_gphy(dev); |
| b43_shm_clear_tssi(dev); |
| } |
| |
| static void b43_phy_initg(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| u16 tmp; |
| |
| if (phy->rev == 1) |
| b43_phy_initb5(dev); |
| else |
| b43_phy_initb6(dev); |
| |
| if (phy->rev >= 2 || phy->gmode) |
| b43_phy_inita(dev); |
| |
| if (phy->rev >= 2) { |
| b43_phy_write(dev, B43_PHY_ANALOGOVER, 0); |
| b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, 0); |
| } |
| if (phy->rev == 2) { |
| b43_phy_write(dev, B43_PHY_RFOVER, 0); |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); |
| } |
| if (phy->rev > 5) { |
| b43_phy_write(dev, B43_PHY_RFOVER, 0x400); |
| b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); |
| } |
| if (phy->gmode || phy->rev >= 2) { |
| tmp = b43_phy_read(dev, B43_PHY_VERSION_OFDM); |
| tmp &= B43_PHYVER_VERSION; |
| if (tmp == 3 || tmp == 5) { |
| b43_phy_write(dev, B43_PHY_OFDM(0xC2), 0x1816); |
| b43_phy_write(dev, B43_PHY_OFDM(0xC3), 0x8006); |
| } |
| if (tmp == 5) { |
| b43_phy_maskset(dev, B43_PHY_OFDM(0xCC), 0x00FF, 0x1F00); |
| } |
| } |
| if ((phy->rev <= 2 && phy->gmode) || phy->rev >= 2) |
| b43_phy_write(dev, B43_PHY_OFDM(0x7E), 0x78); |
| if (phy->radio_rev == 8) { |
| b43_phy_set(dev, B43_PHY_EXTG(0x01), 0x80); |
| b43_phy_set(dev, B43_PHY_OFDM(0x3E), 0x4); |
| } |
| if (has_loopback_gain(phy)) |
| b43_calc_loopback_gain(dev); |
| |
| if (phy->radio_rev != 8) { |
| if (gphy->initval == 0xFFFF) |
| gphy->initval = b43_radio_init2050(dev); |
| else |
| b43_radio_write16(dev, 0x0078, gphy->initval); |
| } |
| b43_lo_g_init(dev); |
| if (has_tx_magnification(phy)) { |
| b43_radio_write16(dev, 0x52, |
| (b43_radio_read16(dev, 0x52) & 0xFF00) |
| | gphy->lo_control->tx_bias | gphy-> |
| lo_control->tx_magn); |
| } else { |
| b43_radio_maskset(dev, 0x52, 0xFFF0, gphy->lo_control->tx_bias); |
| } |
| if (phy->rev >= 6) { |
| b43_phy_maskset(dev, B43_PHY_CCK(0x36), 0x0FFF, (gphy->lo_control->tx_bias << 12)); |
| } |
| if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) |
| b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); |
| else |
| b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); |
| if (phy->rev < 2) |
| b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101); |
| else |
| b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202); |
| if (phy->gmode || phy->rev >= 2) { |
| b43_lo_g_adjust(dev); |
| b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); |
| } |
| |
| if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) { |
| /* The specs state to update the NRSSI LT with |
| * the value 0x7FFFFFFF here. I think that is some weird |
| * compiler optimization in the original driver. |
| * Essentially, what we do here is resetting all NRSSI LT |
| * entries to -32 (see the clamp_val() in nrssi_hw_update()) |
| */ |
| b43_nrssi_hw_update(dev, 0xFFFF); //FIXME? |
| b43_calc_nrssi_threshold(dev); |
| } else if (phy->gmode || phy->rev >= 2) { |
| if (gphy->nrssi[0] == -1000) { |
| B43_WARN_ON(gphy->nrssi[1] != -1000); |
| b43_calc_nrssi_slope(dev); |
| } else |
| b43_calc_nrssi_threshold(dev); |
| } |
| if (phy->radio_rev == 8) |
| b43_phy_write(dev, B43_PHY_EXTG(0x05), 0x3230); |
| b43_phy_init_pctl(dev); |
| /* FIXME: The spec says in the following if, the 0 should be replaced |
| 'if OFDM may not be used in the current locale' |
| but OFDM is legal everywhere */ |
| if ((dev->dev->chip_id == 0x4306 |
| && dev->dev->chip_pkg == 2) || 0) { |
| b43_phy_mask(dev, B43_PHY_CRS0, 0xBFFF); |
| b43_phy_mask(dev, B43_PHY_OFDM(0xC3), 0x7FFF); |
| } |
| } |
| |
| void b43_gphy_channel_switch(struct b43_wldev *dev, |
| unsigned int channel, |
| bool synthetic_pu_workaround) |
| { |
| if (synthetic_pu_workaround) |
| b43_synth_pu_workaround(dev, channel); |
| |
| b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); |
| |
| if (channel == 14) { |
| if (dev->dev->bus_sprom->country_code == |
| SSB_SPROM1CCODE_JAPAN) |
| b43_hf_write(dev, |
| b43_hf_read(dev) & ~B43_HF_ACPR); |
| else |
| b43_hf_write(dev, |
| b43_hf_read(dev) | B43_HF_ACPR); |
| b43_write16(dev, B43_MMIO_CHANNEL_EXT, |
| b43_read16(dev, B43_MMIO_CHANNEL_EXT) |
| | (1 << 11)); |
| } else { |
| b43_write16(dev, B43_MMIO_CHANNEL_EXT, |
| b43_read16(dev, B43_MMIO_CHANNEL_EXT) |
| & 0xF7BF); |
| } |
| } |
| |
| static void default_baseband_attenuation(struct b43_wldev *dev, |
| struct b43_bbatt *bb) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| if (phy->radio_ver == 0x2050 && phy->radio_rev < 6) |
| bb->att = 0; |
| else |
| bb->att = 2; |
| } |
| |
| static void default_radio_attenuation(struct b43_wldev *dev, |
| struct b43_rfatt *rf) |
| { |
| struct b43_bus_dev *bdev = dev->dev; |
| struct b43_phy *phy = &dev->phy; |
| |
| rf->with_padmix = false; |
| |
| if (dev->dev->board_vendor == SSB_BOARDVENDOR_BCM && |
| dev->dev->board_type == SSB_BOARD_BCM4309G) { |
| if (dev->dev->board_rev < 0x43) { |
| rf->att = 2; |
| return; |
| } else if (dev->dev->board_rev < 0x51) { |
| rf->att = 3; |
| return; |
| } |
| } |
| |
| if (phy->type == B43_PHYTYPE_A) { |
| rf->att = 0x60; |
| return; |
| } |
| |
| switch (phy->radio_ver) { |
| case 0x2053: |
| switch (phy->radio_rev) { |
| case 1: |
| rf->att = 6; |
| return; |
| } |
| break; |
| case 0x2050: |
| switch (phy->radio_rev) { |
| case 0: |
| rf->att = 5; |
| return; |
| case 1: |
| if (phy->type == B43_PHYTYPE_G) { |
| if (bdev->board_vendor == SSB_BOARDVENDOR_BCM |
| && bdev->board_type == SSB_BOARD_BCM4309G |
| && bdev->board_rev >= 30) |
| rf->att = 3; |
| else if (bdev->board_vendor == |
| SSB_BOARDVENDOR_BCM |
| && bdev->board_type == |
| SSB_BOARD_BU4306) |
| rf->att = 3; |
| else |
| rf->att = 1; |
| } else { |
| if (bdev->board_vendor == SSB_BOARDVENDOR_BCM |
| && bdev->board_type == SSB_BOARD_BCM4309G |
| && bdev->board_rev >= 30) |
| rf->att = 7; |
| else |
| rf->att = 6; |
| } |
| return; |
| case 2: |
| if (phy->type == B43_PHYTYPE_G) { |
| if (bdev->board_vendor == SSB_BOARDVENDOR_BCM |
| && bdev->board_type == SSB_BOARD_BCM4309G |
| && bdev->board_rev >= 30) |
| rf->att = 3; |
| else if (bdev->board_vendor == |
| SSB_BOARDVENDOR_BCM |
| && bdev->board_type == |
| SSB_BOARD_BU4306) |
| rf->att = 5; |
| else if (bdev->chip_id == 0x4320) |
| rf->att = 4; |
| else |
| rf->att = 3; |
| } else |
| rf->att = 6; |
| return; |
| case 3: |
| rf->att = 5; |
| return; |
| case 4: |
| case 5: |
| rf->att = 1; |
| return; |
| case 6: |
| case 7: |
| rf->att = 5; |
| return; |
| case 8: |
| rf->att = 0xA; |
| rf->with_padmix = true; |
| return; |
| case 9: |
| default: |
| rf->att = 5; |
| return; |
| } |
| } |
| rf->att = 5; |
| } |
| |
| static u16 default_tx_control(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| if (phy->radio_ver != 0x2050) |
| return 0; |
| if (phy->radio_rev == 1) |
| return B43_TXCTL_PA2DB | B43_TXCTL_TXMIX; |
| if (phy->radio_rev < 6) |
| return B43_TXCTL_PA2DB; |
| if (phy->radio_rev == 8) |
| return B43_TXCTL_TXMIX; |
| return 0; |
| } |
| |
| static u8 b43_gphy_aci_detect(struct b43_wldev *dev, u8 channel) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| u8 ret = 0; |
| u16 saved, rssi, temp; |
| int i, j = 0; |
| |
| saved = b43_phy_read(dev, 0x0403); |
| b43_switch_channel(dev, channel); |
| b43_phy_write(dev, 0x0403, (saved & 0xFFF8) | 5); |
| if (gphy->aci_hw_rssi) |
| rssi = b43_phy_read(dev, 0x048A) & 0x3F; |
| else |
| rssi = saved & 0x3F; |
| /* clamp temp to signed 5bit */ |
| if (rssi > 32) |
| rssi -= 64; |
| for (i = 0; i < 100; i++) { |
| temp = (b43_phy_read(dev, 0x047F) >> 8) & 0x3F; |
| if (temp > 32) |
| temp -= 64; |
| if (temp < rssi) |
| j++; |
| if (j >= 20) |
| ret = 1; |
| } |
| b43_phy_write(dev, 0x0403, saved); |
| |
| return ret; |
| } |
| |
| static u8 b43_gphy_aci_scan(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| u8 ret[13]; |
| unsigned int channel = phy->channel; |
| unsigned int i, j, start, end; |
| |
| if (!((phy->type == B43_PHYTYPE_G) && (phy->rev > 0))) |
| return 0; |
| |
| b43_phy_lock(dev); |
| b43_radio_lock(dev); |
| b43_phy_mask(dev, 0x0802, 0xFFFC); |
| b43_phy_mask(dev, B43_PHY_G_CRS, 0x7FFF); |
| b43_set_all_gains(dev, 3, 8, 1); |
| |
| start = (channel - 5 > 0) ? channel - 5 : 1; |
| end = (channel + 5 < 14) ? channel + 5 : 13; |
| |
| for (i = start; i <= end; i++) { |
| if (abs(channel - i) > 2) |
| ret[i - 1] = b43_gphy_aci_detect(dev, i); |
| } |
| b43_switch_channel(dev, channel); |
| b43_phy_maskset(dev, 0x0802, 0xFFFC, 0x0003); |
| b43_phy_mask(dev, 0x0403, 0xFFF8); |
| b43_phy_set(dev, B43_PHY_G_CRS, 0x8000); |
| b43_set_original_gains(dev); |
| for (i = 0; i < 13; i++) { |
| if (!ret[i]) |
| continue; |
| end = (i + 5 < 13) ? i + 5 : 13; |
| for (j = i; j < end; j++) |
| ret[j] = 1; |
| } |
| b43_radio_unlock(dev); |
| b43_phy_unlock(dev); |
| |
| return ret[channel - 1]; |
| } |
| |
| static s32 b43_tssi2dbm_ad(s32 num, s32 den) |
| { |
| if (num < 0) |
| return num / den; |
| else |
| return (num + den / 2) / den; |
| } |
| |
| static s8 b43_tssi2dbm_entry(s8 entry[], u8 index, |
| s16 pab0, s16 pab1, s16 pab2) |
| { |
| s32 m1, m2, f = 256, q, delta; |
| s8 i = 0; |
| |
| m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32); |
| m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1); |
| do { |
| if (i > 15) |
| return -EINVAL; |
| q = b43_tssi2dbm_ad(f * 4096 - |
| b43_tssi2dbm_ad(m2 * f, 16) * f, 2048); |
| delta = abs(q - f); |
| f = q; |
| i++; |
| } while (delta >= 2); |
| entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128); |
| return 0; |
| } |
| |
| u8 *b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev, |
| s16 pab0, s16 pab1, s16 pab2) |
| { |
| unsigned int i; |
| u8 *tab; |
| int err; |
| |
| tab = kmalloc(64, GFP_KERNEL); |
| if (!tab) { |
| b43err(dev->wl, "Could not allocate memory " |
| "for tssi2dbm table\n"); |
| return NULL; |
| } |
| for (i = 0; i < 64; i++) { |
| err = b43_tssi2dbm_entry(tab, i, pab0, pab1, pab2); |
| if (err) { |
| b43err(dev->wl, "Could not generate " |
| "tssi2dBm table\n"); |
| kfree(tab); |
| return NULL; |
| } |
| } |
| |
| return tab; |
| } |
| |
| /* Initialise the TSSI->dBm lookup table */ |
| static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| s16 pab0, pab1, pab2; |
| |
| pab0 = (s16) (dev->dev->bus_sprom->pa0b0); |
| pab1 = (s16) (dev->dev->bus_sprom->pa0b1); |
| pab2 = (s16) (dev->dev->bus_sprom->pa0b2); |
| |
| B43_WARN_ON((dev->dev->chip_id == 0x4301) && |
| (phy->radio_ver != 0x2050)); /* Not supported anymore */ |
| |
| gphy->dyn_tssi_tbl = false; |
| |
| if (pab0 != 0 && pab1 != 0 && pab2 != 0 && |
| pab0 != -1 && pab1 != -1 && pab2 != -1) { |
| /* The pabX values are set in SPROM. Use them. */ |
| if ((s8) dev->dev->bus_sprom->itssi_bg != 0 && |
| (s8) dev->dev->bus_sprom->itssi_bg != -1) { |
| gphy->tgt_idle_tssi = |
| (s8) (dev->dev->bus_sprom->itssi_bg); |
| } else |
| gphy->tgt_idle_tssi = 62; |
| gphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, |
| pab1, pab2); |
| if (!gphy->tssi2dbm) |
| return -ENOMEM; |
| gphy->dyn_tssi_tbl = true; |
| } else { |
| /* pabX values not set in SPROM. */ |
| gphy->tgt_idle_tssi = 52; |
| gphy->tssi2dbm = b43_tssi2dbm_g_table; |
| } |
| |
| return 0; |
| } |
| |
| static int b43_gphy_op_allocate(struct b43_wldev *dev) |
| { |
| struct b43_phy_g *gphy; |
| struct b43_txpower_lo_control *lo; |
| int err; |
| |
| gphy = kzalloc(sizeof(*gphy), GFP_KERNEL); |
| if (!gphy) { |
| err = -ENOMEM; |
| goto error; |
| } |
| dev->phy.g = gphy; |
| |
| lo = kzalloc(sizeof(*lo), GFP_KERNEL); |
| if (!lo) { |
| err = -ENOMEM; |
| goto err_free_gphy; |
| } |
| gphy->lo_control = lo; |
| |
| err = b43_gphy_init_tssi2dbm_table(dev); |
| if (err) |
| goto err_free_lo; |
| |
| return 0; |
| |
| err_free_lo: |
| kfree(lo); |
| err_free_gphy: |
| kfree(gphy); |
| error: |
| return err; |
| } |
| |
| static void b43_gphy_op_prepare_structs(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| const void *tssi2dbm; |
| int tgt_idle_tssi; |
| struct b43_txpower_lo_control *lo; |
| unsigned int i; |
| |
| /* tssi2dbm table is constant, so it is initialized at alloc time. |
| * Save a copy of the pointer. */ |
| tssi2dbm = gphy->tssi2dbm; |
| tgt_idle_tssi = gphy->tgt_idle_tssi; |
| /* Save the LO pointer. */ |
| lo = gphy->lo_control; |
| |
| /* Zero out the whole PHY structure. */ |
| memset(gphy, 0, sizeof(*gphy)); |
| |
| /* Restore pointers. */ |
| gphy->tssi2dbm = tssi2dbm; |
| gphy->tgt_idle_tssi = tgt_idle_tssi; |
| gphy->lo_control = lo; |
| |
| memset(gphy->minlowsig, 0xFF, sizeof(gphy->minlowsig)); |
| |
| /* NRSSI */ |
| for (i = 0; i < ARRAY_SIZE(gphy->nrssi); i++) |
| gphy->nrssi[i] = -1000; |
| for (i = 0; i < ARRAY_SIZE(gphy->nrssi_lt); i++) |
| gphy->nrssi_lt[i] = i; |
| |
| gphy->lofcal = 0xFFFF; |
| gphy->initval = 0xFFFF; |
| |
| gphy->interfmode = B43_INTERFMODE_NONE; |
| |
| /* OFDM-table address caching. */ |
| gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN; |
| |
| gphy->average_tssi = 0xFF; |
| |
| /* Local Osciallator structure */ |
| lo->tx_bias = 0xFF; |
| INIT_LIST_HEAD(&lo->calib_list); |
| } |
| |
| static void b43_gphy_op_free(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| |
| kfree(gphy->lo_control); |
| |
| if (gphy->dyn_tssi_tbl) |
| kfree(gphy->tssi2dbm); |
| gphy->dyn_tssi_tbl = false; |
| gphy->tssi2dbm = NULL; |
| |
| kfree(gphy); |
| dev->phy.g = NULL; |
| } |
| |
| static int b43_gphy_op_prepare_hardware(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| struct b43_txpower_lo_control *lo = gphy->lo_control; |
| |
| B43_WARN_ON(phy->type != B43_PHYTYPE_G); |
| |
| default_baseband_attenuation(dev, &gphy->bbatt); |
| default_radio_attenuation(dev, &gphy->rfatt); |
| gphy->tx_control = (default_tx_control(dev) << 4); |
| generate_rfatt_list(dev, &lo->rfatt_list); |
| generate_bbatt_list(dev, &lo->bbatt_list); |
| |
| /* Commit previous writes */ |
| b43_read32(dev, B43_MMIO_MACCTL); |
| |
| if (phy->rev == 1) { |
| /* Workaround: Temporarly disable gmode through the early init |
| * phase, as the gmode stuff is not needed for phy rev 1 */ |
| phy->gmode = false; |
| b43_wireless_core_reset(dev, 0); |
| b43_phy_initg(dev); |
| phy->gmode = true; |
| b43_wireless_core_reset(dev, 1); |
| } |
| |
| return 0; |
| } |
| |
| static int b43_gphy_op_init(struct b43_wldev *dev) |
| { |
| b43_phy_initg(dev); |
| |
| return 0; |
| } |
| |
| static void b43_gphy_op_exit(struct b43_wldev *dev) |
| { |
| b43_lo_g_cleanup(dev); |
| } |
| |
| static u16 b43_gphy_op_read(struct b43_wldev *dev, u16 reg) |
| { |
| b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg); |
| return b43_read16(dev, B43_MMIO_PHY_DATA); |
| } |
| |
| static void b43_gphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) |
| { |
| b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg); |
| b43_write16(dev, B43_MMIO_PHY_DATA, value); |
| } |
| |
| static u16 b43_gphy_op_radio_read(struct b43_wldev *dev, u16 reg) |
| { |
| /* Register 1 is a 32-bit register. */ |
| B43_WARN_ON(reg == 1); |
| /* G-PHY needs 0x80 for read access. */ |
| reg |= 0x80; |
| |
| b43_write16f(dev, B43_MMIO_RADIO_CONTROL, reg); |
| return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); |
| } |
| |
| static void b43_gphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) |
| { |
| /* Register 1 is a 32-bit register. */ |
| B43_WARN_ON(reg == 1); |
| |
| b43_write16f(dev, B43_MMIO_RADIO_CONTROL, reg); |
| b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); |
| } |
| |
| static bool b43_gphy_op_supports_hwpctl(struct b43_wldev *dev) |
| { |
| return (dev->phy.rev >= 6); |
| } |
| |
| static void b43_gphy_op_software_rfkill(struct b43_wldev *dev, |
| bool blocked) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| unsigned int channel; |
| |
| might_sleep(); |
| |
| if (!blocked) { |
| /* Turn radio ON */ |
| if (phy->radio_on) |
| return; |
| |
| b43_phy_write(dev, 0x0015, 0x8000); |
| b43_phy_write(dev, 0x0015, 0xCC00); |
| b43_phy_write(dev, 0x0015, (phy->gmode ? 0x00C0 : 0x0000)); |
| if (gphy->radio_off_context.valid) { |
| /* Restore the RFover values. */ |
| b43_phy_write(dev, B43_PHY_RFOVER, |
| gphy->radio_off_context.rfover); |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, |
| gphy->radio_off_context.rfoverval); |
| gphy->radio_off_context.valid = false; |
| } |
| channel = phy->channel; |
| b43_gphy_channel_switch(dev, 6, 1); |
| b43_gphy_channel_switch(dev, channel, 0); |
| } else { |
| /* Turn radio OFF */ |
| u16 rfover, rfoverval; |
| |
| rfover = b43_phy_read(dev, B43_PHY_RFOVER); |
| rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL); |
| gphy->radio_off_context.rfover = rfover; |
| gphy->radio_off_context.rfoverval = rfoverval; |
| gphy->radio_off_context.valid = true; |
| b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C); |
| b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73); |
| } |
| } |
| |
| static int b43_gphy_op_switch_channel(struct b43_wldev *dev, |
| unsigned int new_channel) |
| { |
| if ((new_channel < 1) || (new_channel > 14)) |
| return -EINVAL; |
| b43_gphy_channel_switch(dev, new_channel, 0); |
| |
| return 0; |
| } |
| |
| static unsigned int b43_gphy_op_get_default_chan(struct b43_wldev *dev) |
| { |
| return 1; /* Default to channel 1 */ |
| } |
| |
| static void b43_gphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) |
| { |
| struct b43_phy *phy = &dev->phy; |
| u16 tmp; |
| int autodiv = 0; |
| |
| if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) |
| autodiv = 1; |
| |
| b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ANTDIVHELP); |
| |
| b43_phy_maskset(dev, B43_PHY_BBANDCFG, ~B43_PHY_BBANDCFG_RXANT, |
| (autodiv ? B43_ANTENNA_AUTO1 : antenna) << |
| B43_PHY_BBANDCFG_RXANT_SHIFT); |
| |
| if (autodiv) { |
| tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); |
| if (antenna == B43_ANTENNA_AUTO1) |
| tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; |
| else |
| tmp |= B43_PHY_ANTDWELL_AUTODIV1; |
| b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); |
| } |
| |
| tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT); |
| if (autodiv) |
| tmp |= B43_PHY_ANTWRSETT_ARXDIV; |
| else |
| tmp &= ~B43_PHY_ANTWRSETT_ARXDIV; |
| b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp); |
| |
| if (autodiv) |
| b43_phy_set(dev, B43_PHY_ANTWRSETT, B43_PHY_ANTWRSETT_ARXDIV); |
| else { |
| b43_phy_mask(dev, B43_PHY_ANTWRSETT, |
| B43_PHY_ANTWRSETT_ARXDIV); |
| } |
| |
| if (phy->rev >= 2) { |
| b43_phy_set(dev, B43_PHY_OFDM61, B43_PHY_OFDM61_10); |
| b43_phy_maskset(dev, B43_PHY_DIVSRCHGAINBACK, 0xFF00, 0x15); |
| |
| if (phy->rev == 2) |
| b43_phy_write(dev, B43_PHY_ADIVRELATED, 8); |
| else |
| b43_phy_maskset(dev, B43_PHY_ADIVRELATED, 0xFF00, 8); |
| } |
| if (phy->rev >= 6) |
| b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC); |
| |
| b43_hf_write(dev, b43_hf_read(dev) | B43_HF_ANTDIVHELP); |
| } |
| |
| static int b43_gphy_op_interf_mitigation(struct b43_wldev *dev, |
| enum b43_interference_mitigation mode) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| int currentmode; |
| |
| B43_WARN_ON(phy->type != B43_PHYTYPE_G); |
| if ((phy->rev == 0) || (!phy->gmode)) |
| return -ENODEV; |
| |
| gphy->aci_wlan_automatic = false; |
| switch (mode) { |
| case B43_INTERFMODE_AUTOWLAN: |
| gphy->aci_wlan_automatic = true; |
| if (gphy->aci_enable) |
| mode = B43_INTERFMODE_MANUALWLAN; |
| else |
| mode = B43_INTERFMODE_NONE; |
| break; |
| case B43_INTERFMODE_NONE: |
| case B43_INTERFMODE_NONWLAN: |
| case B43_INTERFMODE_MANUALWLAN: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| currentmode = gphy->interfmode; |
| if (currentmode == mode) |
| return 0; |
| if (currentmode != B43_INTERFMODE_NONE) |
| b43_radio_interference_mitigation_disable(dev, currentmode); |
| |
| if (mode == B43_INTERFMODE_NONE) { |
| gphy->aci_enable = false; |
| gphy->aci_hw_rssi = false; |
| } else |
| b43_radio_interference_mitigation_enable(dev, mode); |
| gphy->interfmode = mode; |
| |
| return 0; |
| } |
| |
| /* http://bcm-specs.sipsolutions.net/EstimatePowerOut |
| * This function converts a TSSI value to dBm in Q5.2 |
| */ |
| static s8 b43_gphy_estimate_power_out(struct b43_wldev *dev, s8 tssi) |
| { |
| struct b43_phy_g *gphy = dev->phy.g; |
| s8 dbm; |
| s32 tmp; |
| |
| tmp = (gphy->tgt_idle_tssi - gphy->cur_idle_tssi + tssi); |
| tmp = clamp_val(tmp, 0x00, 0x3F); |
| dbm = gphy->tssi2dbm[tmp]; |
| |
| return dbm; |
| } |
| |
| static void b43_put_attenuation_into_ranges(struct b43_wldev *dev, |
| int *_bbatt, int *_rfatt) |
| { |
| int rfatt = *_rfatt; |
| int bbatt = *_bbatt; |
| struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; |
| |
| /* Get baseband and radio attenuation values into their permitted ranges. |
| * Radio attenuation affects power level 4 times as much as baseband. */ |
| |
| /* Range constants */ |
| const int rf_min = lo->rfatt_list.min_val; |
| const int rf_max = lo->rfatt_list.max_val; |
| const int bb_min = lo->bbatt_list.min_val; |
| const int bb_max = lo->bbatt_list.max_val; |
| |
| while (1) { |
| if (rfatt > rf_max && bbatt > bb_max - 4) |
| break; /* Can not get it into ranges */ |
| if (rfatt < rf_min && bbatt < bb_min + 4) |
| break; /* Can not get it into ranges */ |
| if (bbatt > bb_max && rfatt > rf_max - 1) |
| break; /* Can not get it into ranges */ |
| if (bbatt < bb_min && rfatt < rf_min + 1) |
| break; /* Can not get it into ranges */ |
| |
| if (bbatt > bb_max) { |
| bbatt -= 4; |
| rfatt += 1; |
| continue; |
| } |
| if (bbatt < bb_min) { |
| bbatt += 4; |
| rfatt -= 1; |
| continue; |
| } |
| if (rfatt > rf_max) { |
| rfatt -= 1; |
| bbatt += 4; |
| continue; |
| } |
| if (rfatt < rf_min) { |
| rfatt += 1; |
| bbatt -= 4; |
| continue; |
| } |
| break; |
| } |
| |
| *_rfatt = clamp_val(rfatt, rf_min, rf_max); |
| *_bbatt = clamp_val(bbatt, bb_min, bb_max); |
| } |
| |
| static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| int rfatt, bbatt; |
| u8 tx_control; |
| |
| b43_mac_suspend(dev); |
| |
| /* Calculate the new attenuation values. */ |
| bbatt = gphy->bbatt.att; |
| bbatt += gphy->bbatt_delta; |
| rfatt = gphy->rfatt.att; |
| rfatt += gphy->rfatt_delta; |
| |
| b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); |
| tx_control = gphy->tx_control; |
| if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) { |
| if (rfatt <= 1) { |
| if (tx_control == 0) { |
| tx_control = |
| B43_TXCTL_PA2DB | |
| B43_TXCTL_TXMIX; |
| rfatt += 2; |
| bbatt += 2; |
| } else if (dev->dev->bus_sprom-> |
| boardflags_lo & |
| B43_BFL_PACTRL) { |
| bbatt += 4 * (rfatt - 2); |
| rfatt = 2; |
| } |
| } else if (rfatt > 4 && tx_control) { |
| tx_control = 0; |
| if (bbatt < 3) { |
| rfatt -= 3; |
| bbatt += 2; |
| } else { |
| rfatt -= 2; |
| bbatt -= 2; |
| } |
| } |
| } |
| /* Save the control values */ |
| gphy->tx_control = tx_control; |
| b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); |
| gphy->rfatt.att = rfatt; |
| gphy->bbatt.att = bbatt; |
| |
| if (b43_debug(dev, B43_DBG_XMITPOWER)) |
| b43dbg(dev->wl, "Adjusting TX power\n"); |
| |
| /* Adjust the hardware */ |
| b43_phy_lock(dev); |
| b43_radio_lock(dev); |
| b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, |
| gphy->tx_control); |
| b43_radio_unlock(dev); |
| b43_phy_unlock(dev); |
| |
| b43_mac_enable(dev); |
| } |
| |
| static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev, |
| bool ignore_tssi) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| unsigned int average_tssi; |
| int cck_result, ofdm_result; |
| int estimated_pwr, desired_pwr, pwr_adjust; |
| int rfatt_delta, bbatt_delta; |
| unsigned int max_pwr; |
| |
| /* First get the average TSSI */ |
| cck_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_CCK); |
| ofdm_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_OFDM_G); |
| if ((cck_result < 0) && (ofdm_result < 0)) { |
| /* No TSSI information available */ |
| if (!ignore_tssi) |
| goto no_adjustment_needed; |
| cck_result = 0; |
| ofdm_result = 0; |
| } |
| if (cck_result < 0) |
| average_tssi = ofdm_result; |
| else if (ofdm_result < 0) |
| average_tssi = cck_result; |
| else |
| average_tssi = (cck_result + ofdm_result) / 2; |
| /* Merge the average with the stored value. */ |
| if (likely(gphy->average_tssi != 0xFF)) |
| average_tssi = (average_tssi + gphy->average_tssi) / 2; |
| gphy->average_tssi = average_tssi; |
| B43_WARN_ON(average_tssi >= B43_TSSI_MAX); |
| |
| /* Estimate the TX power emission based on the TSSI */ |
| estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi); |
| |
| B43_WARN_ON(phy->type != B43_PHYTYPE_G); |
| max_pwr = dev->dev->bus_sprom->maxpwr_bg; |
| if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) |
| max_pwr -= 3; /* minus 0.75 */ |
| if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) { |
| b43warn(dev->wl, |
| "Invalid max-TX-power value in SPROM.\n"); |
| max_pwr = INT_TO_Q52(20); /* fake it */ |
| dev->dev->bus_sprom->maxpwr_bg = max_pwr; |
| } |
| |
| /* Get desired power (in Q5.2) */ |
| if (phy->desired_txpower < 0) |
| desired_pwr = INT_TO_Q52(0); |
| else |
| desired_pwr = INT_TO_Q52(phy->desired_txpower); |
| /* And limit it. max_pwr already is Q5.2 */ |
| desired_pwr = clamp_val(desired_pwr, 0, max_pwr); |
| if (b43_debug(dev, B43_DBG_XMITPOWER)) { |
| b43dbg(dev->wl, |
| "[TX power] current = " Q52_FMT |
| " dBm, desired = " Q52_FMT |
| " dBm, max = " Q52_FMT "\n", |
| Q52_ARG(estimated_pwr), |
| Q52_ARG(desired_pwr), |
| Q52_ARG(max_pwr)); |
| } |
| |
| /* Calculate the adjustment delta. */ |
| pwr_adjust = desired_pwr - estimated_pwr; |
| if (pwr_adjust == 0) |
| goto no_adjustment_needed; |
| |
| /* RF attenuation delta. */ |
| rfatt_delta = ((pwr_adjust + 7) / 8); |
| /* Lower attenuation => Bigger power output. Negate it. */ |
| rfatt_delta = -rfatt_delta; |
| |
| /* Baseband attenuation delta. */ |
| bbatt_delta = pwr_adjust / 2; |
| /* Lower attenuation => Bigger power output. Negate it. */ |
| bbatt_delta = -bbatt_delta; |
| /* RF att affects power level 4 times as much as |
| * Baseband attennuation. Subtract it. */ |
| bbatt_delta -= 4 * rfatt_delta; |
| |
| #if B43_DEBUG |
| if (b43_debug(dev, B43_DBG_XMITPOWER)) { |
| int dbm = pwr_adjust < 0 ? -pwr_adjust : pwr_adjust; |
| b43dbg(dev->wl, |
| "[TX power deltas] %s" Q52_FMT " dBm => " |
| "bbatt-delta = %d, rfatt-delta = %d\n", |
| (pwr_adjust < 0 ? "-" : ""), Q52_ARG(dbm), |
| bbatt_delta, rfatt_delta); |
| } |
| #endif /* DEBUG */ |
| |
| /* So do we finally need to adjust something in hardware? */ |
| if ((rfatt_delta == 0) && (bbatt_delta == 0)) |
| goto no_adjustment_needed; |
| |
| /* Save the deltas for later when we adjust the power. */ |
| gphy->bbatt_delta = bbatt_delta; |
| gphy->rfatt_delta = rfatt_delta; |
| |
| /* We need to adjust the TX power on the device. */ |
| return B43_TXPWR_RES_NEED_ADJUST; |
| |
| no_adjustment_needed: |
| return B43_TXPWR_RES_DONE; |
| } |
| |
| static void b43_gphy_op_pwork_15sec(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_g *gphy = phy->g; |
| |
| b43_mac_suspend(dev); |
| //TODO: update_aci_moving_average |
| if (gphy->aci_enable && gphy->aci_wlan_automatic) { |
| if (!gphy->aci_enable && 1 /*TODO: not scanning? */ ) { |
| if (0 /*TODO: bunch of conditions */ ) { |
| phy->ops->interf_mitigation(dev, |
| B43_INTERFMODE_MANUALWLAN); |
| } |
| } else if (0 /*TODO*/) { |
| if (/*(aci_average > 1000) &&*/ !b43_gphy_aci_scan(dev)) |
| phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); |
| } |
| } else if (gphy->interfmode == B43_INTERFMODE_NONWLAN && |
| phy->rev == 1) { |
| //TODO: implement rev1 workaround |
| } |
| b43_lo_g_maintanance_work(dev); |
| b43_mac_enable(dev); |
| } |
| |
| static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) |
| return; |
| |
| b43_mac_suspend(dev); |
| b43_calc_nrssi_slope(dev); |
| if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { |
| u8 old_chan = phy->channel; |
| |
| /* VCO Calibration */ |
| if (old_chan >= 8) |
| b43_switch_channel(dev, 1); |
| else |
| b43_switch_channel(dev, 13); |
| b43_switch_channel(dev, old_chan); |
| } |
| b43_mac_enable(dev); |
| } |
| |
| const struct b43_phy_operations b43_phyops_g = { |
| .allocate = b43_gphy_op_allocate, |
| .free = b43_gphy_op_free, |
| .prepare_structs = b43_gphy_op_prepare_structs, |
| .prepare_hardware = b43_gphy_op_prepare_hardware, |
| .init = b43_gphy_op_init, |
| .exit = b43_gphy_op_exit, |
| .phy_read = b43_gphy_op_read, |
| .phy_write = b43_gphy_op_write, |
| .radio_read = b43_gphy_op_radio_read, |
| .radio_write = b43_gphy_op_radio_write, |
| .supports_hwpctl = b43_gphy_op_supports_hwpctl, |
| .software_rfkill = b43_gphy_op_software_rfkill, |
| .switch_analog = b43_phyop_switch_analog_generic, |
| .switch_channel = b43_gphy_op_switch_channel, |
| .get_default_chan = b43_gphy_op_get_default_chan, |
| .set_rx_antenna = b43_gphy_op_set_rx_antenna, |
| .interf_mitigation = b43_gphy_op_interf_mitigation, |
| .recalc_txpower = b43_gphy_op_recalc_txpower, |
| .adjust_txpower = b43_gphy_op_adjust_txpower, |
| .pwork_15sec = b43_gphy_op_pwork_15sec, |
| .pwork_60sec = b43_gphy_op_pwork_60sec, |
| }; |