| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| |
| #include "clk.h" |
| #include "common.h" |
| |
| #define CCGR0 0x68 |
| #define CCGR1 0x6c |
| #define CCGR2 0x70 |
| #define CCGR3 0x74 |
| #define CCGR4 0x78 |
| #define CCGR5 0x7c |
| #define CCGR6 0x80 |
| #define CCGR7 0x84 |
| |
| #define CLPCR 0x54 |
| #define BP_CLPCR_LPM 0 |
| #define BM_CLPCR_LPM (0x3 << 0) |
| #define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) |
| #define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) |
| #define BM_CLPCR_SBYOS (0x1 << 6) |
| #define BM_CLPCR_DIS_REF_OSC (0x1 << 7) |
| #define BM_CLPCR_VSTBY (0x1 << 8) |
| #define BP_CLPCR_STBY_COUNT 9 |
| #define BM_CLPCR_STBY_COUNT (0x3 << 9) |
| #define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) |
| #define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) |
| #define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) |
| #define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) |
| #define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) |
| #define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) |
| #define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) |
| #define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) |
| #define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) |
| #define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) |
| #define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) |
| |
| #define CGPR 0x64 |
| #define BM_CGPR_CHICKEN_BIT (0x1 << 17) |
| |
| static void __iomem *ccm_base; |
| |
| void imx6q_set_chicken_bit(void) |
| { |
| u32 val = readl_relaxed(ccm_base + CGPR); |
| |
| val |= BM_CGPR_CHICKEN_BIT; |
| writel_relaxed(val, ccm_base + CGPR); |
| } |
| |
| int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) |
| { |
| u32 val = readl_relaxed(ccm_base + CLPCR); |
| |
| val &= ~BM_CLPCR_LPM; |
| switch (mode) { |
| case WAIT_CLOCKED: |
| break; |
| case WAIT_UNCLOCKED: |
| val |= 0x1 << BP_CLPCR_LPM; |
| val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; |
| break; |
| case STOP_POWER_ON: |
| val |= 0x2 << BP_CLPCR_LPM; |
| break; |
| case WAIT_UNCLOCKED_POWER_OFF: |
| val |= 0x1 << BP_CLPCR_LPM; |
| val &= ~BM_CLPCR_VSTBY; |
| val &= ~BM_CLPCR_SBYOS; |
| break; |
| case STOP_POWER_OFF: |
| val |= 0x2 << BP_CLPCR_LPM; |
| val |= 0x3 << BP_CLPCR_STBY_COUNT; |
| val |= BM_CLPCR_VSTBY; |
| val |= BM_CLPCR_SBYOS; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| writel_relaxed(val, ccm_base + CLPCR); |
| |
| return 0; |
| } |
| |
| static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; |
| static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; |
| static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; |
| static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; |
| static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; |
| static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; |
| static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; |
| static const char *audio_sels[] = { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; |
| static const char *gpu_axi_sels[] = { "axi", "ahb", }; |
| static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; |
| static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; |
| static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; |
| static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; |
| static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; |
| static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; |
| static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; |
| static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; |
| static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; |
| static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; |
| static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", }; |
| static const char *pcie_axi_sels[] = { "axi", "ahb", }; |
| static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", }; |
| static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; |
| static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; |
| static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; |
| static const char *vdo_axi_sels[] = { "axi", "ahb", }; |
| static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; |
| static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video", |
| "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", |
| "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", }; |
| |
| enum mx6q_clks { |
| dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, |
| pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m, |
| pll2_198m, pll3_120m, pll3_80m, pll3_60m, twd, step, pll1_sw, |
| periph_pre, periph2_pre, periph_clk2_sel, periph2_clk2_sel, axi_sel, |
| esai_sel, asrc_sel, spdif_sel, gpu2d_axi, gpu3d_axi, gpu2d_core_sel, |
| gpu3d_core_sel, gpu3d_shader_sel, ipu1_sel, ipu2_sel, ldb_di0_sel, |
| ldb_di1_sel, ipu1_di0_pre_sel, ipu1_di1_pre_sel, ipu2_di0_pre_sel, |
| ipu2_di1_pre_sel, ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel, |
| ipu2_di1_sel, hsi_tx_sel, pcie_axi_sel, ssi1_sel, ssi2_sel, ssi3_sel, |
| usdhc1_sel, usdhc2_sel, usdhc3_sel, usdhc4_sel, enfc_sel, emi_sel, |
| emi_slow_sel, vdo_axi_sel, vpu_axi_sel, cko1_sel, periph, periph2, |
| periph_clk2, periph2_clk2, ipg, ipg_per, esai_pred, esai_podf, |
| asrc_pred, asrc_podf, spdif_pred, spdif_podf, can_root, ecspi_root, |
| gpu2d_core_podf, gpu3d_core_podf, gpu3d_shader, ipu1_podf, ipu2_podf, |
| ldb_di0_podf, ldb_di1_podf, ipu1_di0_pre, ipu1_di1_pre, ipu2_di0_pre, |
| ipu2_di1_pre, hsi_tx_podf, ssi1_pred, ssi1_podf, ssi2_pred, ssi2_podf, |
| ssi3_pred, ssi3_podf, uart_serial_podf, usdhc1_podf, usdhc2_podf, |
| usdhc3_podf, usdhc4_podf, enfc_pred, enfc_podf, emi_podf, |
| emi_slow_podf, vpu_axi_podf, cko1_podf, axi, mmdc_ch0_axi_podf, |
| mmdc_ch1_axi_podf, arm, ahb, apbh_dma, asrc, can1_ipg, can1_serial, |
| can2_ipg, can2_serial, ecspi1, ecspi2, ecspi3, ecspi4, ecspi5, enet, |
| esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb, |
| hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2, |
| ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi, |
| mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch, |
| gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1, |
| ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, |
| usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, |
| pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, |
| ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, |
| sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, |
| usbphy2_gate, clk_max |
| }; |
| |
| static struct clk *clk[clk_max]; |
| static struct clk_onecell_data clk_data; |
| |
| static enum mx6q_clks const clks_init_on[] __initconst = { |
| mmdc_ch0_axi, rom, pll1_sys, |
| }; |
| |
| static struct clk_div_table clk_enet_ref_table[] = { |
| { .val = 0, .div = 20, }, |
| { .val = 1, .div = 10, }, |
| { .val = 2, .div = 5, }, |
| { .val = 3, .div = 4, }, |
| }; |
| |
| int __init mx6q_clocks_init(void) |
| { |
| struct device_node *np; |
| void __iomem *base; |
| int i, irq; |
| |
| clk[dummy] = imx_clk_fixed("dummy", 0); |
| |
| /* retrieve the freqency of fixed clocks from device tree */ |
| for_each_compatible_node(np, NULL, "fixed-clock") { |
| u32 rate; |
| if (of_property_read_u32(np, "clock-frequency", &rate)) |
| continue; |
| |
| if (of_device_is_compatible(np, "fsl,imx-ckil")) |
| clk[ckil] = imx_clk_fixed("ckil", rate); |
| else if (of_device_is_compatible(np, "fsl,imx-ckih1")) |
| clk[ckih] = imx_clk_fixed("ckih", rate); |
| else if (of_device_is_compatible(np, "fsl,imx-osc")) |
| clk[osc] = imx_clk_fixed("osc", rate); |
| } |
| |
| np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); |
| base = of_iomap(np, 0); |
| WARN_ON(!base); |
| |
| /* type name parent_name base div_mask */ |
| clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); |
| clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); |
| clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); |
| clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); |
| clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); |
| clk[pll6_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); |
| clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3); |
| clk[pll8_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll8_mlb", "osc", base + 0xd0, 0x0); |
| |
| /* |
| * Bit 20 is the reserved and read-only bit, we do this only for: |
| * - Do nothing for usbphy clk_enable/disable |
| * - Keep refcount when do usbphy clk_enable/disable, in that case, |
| * the clk framework may need to enable/disable usbphy's parent |
| */ |
| clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); |
| clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); |
| |
| /* |
| * usbphy*_gate needs to be on after system boots up, and software |
| * never needs to control it anymore. |
| */ |
| clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); |
| clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); |
| |
| clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5); |
| clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4); |
| |
| clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20); |
| clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); |
| |
| clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, |
| base + 0xe0, 0, 2, 0, clk_enet_ref_table, |
| &imx_ccm_lock); |
| |
| /* name parent_name reg idx */ |
| clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); |
| clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); |
| clk[pll2_pfd2_396m] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); |
| clk[pll3_pfd0_720m] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); |
| clk[pll3_pfd1_540m] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); |
| clk[pll3_pfd2_508m] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); |
| clk[pll3_pfd3_454m] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); |
| |
| /* name parent_name mult div */ |
| clk[pll2_198m] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); |
| clk[pll3_120m] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); |
| clk[pll3_80m] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); |
| clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); |
| clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2); |
| |
| np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm"); |
| base = of_iomap(np, 0); |
| WARN_ON(!base); |
| ccm_base = base; |
| |
| /* name reg shift width parent_names num_parents */ |
| clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); |
| clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); |
| clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); |
| clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); |
| clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); |
| clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); |
| clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); |
| clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); |
| clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); |
| clk[spdif_sel] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); |
| clk[gpu2d_axi] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); |
| clk[gpu3d_axi] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); |
| clk[gpu2d_core_sel] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels)); |
| clk[gpu3d_core_sel] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels)); |
| clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); |
| clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); |
| clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); |
| clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); |
| clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); |
| clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); |
| clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); |
| clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); |
| clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); |
| clk[ipu1_di0_sel] = imx_clk_mux("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels)); |
| clk[ipu1_di1_sel] = imx_clk_mux("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels)); |
| clk[ipu2_di0_sel] = imx_clk_mux("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels)); |
| clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels)); |
| clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels)); |
| clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); |
| clk[ssi1_sel] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); |
| clk[ssi2_sel] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); |
| clk[ssi3_sel] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); |
| clk[usdhc1_sel] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); |
| clk[usdhc2_sel] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); |
| clk[usdhc3_sel] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); |
| clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); |
| clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); |
| clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels)); |
| clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels)); |
| clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels)); |
| clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels)); |
| clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); |
| |
| /* name reg shift width busy: reg, shift parent_names num_parents */ |
| clk[periph] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); |
| clk[periph2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); |
| |
| /* name parent_name reg shift width */ |
| clk[periph_clk2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); |
| clk[periph2_clk2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); |
| clk[ipg] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); |
| clk[ipg_per] = imx_clk_divider("ipg_per", "ipg", base + 0x1c, 0, 6); |
| clk[esai_pred] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3); |
| clk[esai_podf] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3); |
| clk[asrc_pred] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3); |
| clk[asrc_podf] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3); |
| clk[spdif_pred] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); |
| clk[spdif_podf] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); |
| clk[can_root] = imx_clk_divider("can_root", "pll3_usb_otg", base + 0x20, 2, 6); |
| clk[ecspi_root] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6); |
| clk[gpu2d_core_podf] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3); |
| clk[gpu3d_core_podf] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3); |
| clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); |
| clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); |
| clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); |
| clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); |
| clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); |
| clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); |
| clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); |
| clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); |
| clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); |
| clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); |
| clk[ipu2_di1_pre] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3); |
| clk[hsi_tx_podf] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3); |
| clk[ssi1_pred] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); |
| clk[ssi1_podf] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); |
| clk[ssi2_pred] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); |
| clk[ssi2_podf] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); |
| clk[ssi3_pred] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); |
| clk[ssi3_podf] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); |
| clk[uart_serial_podf] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6); |
| clk[usdhc1_podf] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); |
| clk[usdhc2_podf] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); |
| clk[usdhc3_podf] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); |
| clk[usdhc4_podf] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); |
| clk[enfc_pred] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3); |
| clk[enfc_podf] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6); |
| clk[emi_podf] = imx_clk_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3); |
| clk[emi_slow_podf] = imx_clk_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3); |
| clk[vpu_axi_podf] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3); |
| clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); |
| |
| /* name parent_name reg shift width busy: reg, shift */ |
| clk[axi] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0); |
| clk[mmdc_ch0_axi_podf] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4); |
| clk[mmdc_ch1_axi_podf] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); |
| clk[arm] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); |
| clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); |
| |
| /* name parent_name reg shift */ |
| clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); |
| clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6); |
| clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); |
| clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16); |
| clk[can2_ipg] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18); |
| clk[can2_serial] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20); |
| clk[ecspi1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0); |
| clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); |
| clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); |
| clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); |
| clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); |
| clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); |
| clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16); |
| clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); |
| clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); |
| clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); |
| clk[gpu3d_core] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26); |
| clk[hdmi_iahb] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0); |
| clk[hdmi_isfr] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4); |
| clk[i2c1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6); |
| clk[i2c2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8); |
| clk[i2c3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10); |
| clk[iim] = imx_clk_gate2("iim", "ipg", base + 0x70, 12); |
| clk[enfc] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14); |
| clk[ipu1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0); |
| clk[ipu1_di0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2); |
| clk[ipu1_di1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4); |
| clk[ipu2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6); |
| clk[ipu2_di0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8); |
| clk[ldb_di0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12); |
| clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); |
| clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); |
| clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); |
| clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); |
| clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); |
| clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); |
| clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); |
| clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30); |
| clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0); |
| clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); |
| clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16); |
| clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18); |
| clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20); |
| clk[pwm4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22); |
| clk[gpmi_bch_apb] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24); |
| clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); |
| clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28); |
| clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); |
| clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); |
| clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); |
| clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); |
| clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); |
| clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18); |
| clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20); |
| clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22); |
| clk[uart_ipg] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); |
| clk[uart_serial] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26); |
| clk[usboh3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); |
| clk[usdhc1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); |
| clk[usdhc2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); |
| clk[usdhc3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); |
| clk[usdhc4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); |
| clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12); |
| clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14); |
| clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); |
| |
| for (i = 0; i < ARRAY_SIZE(clk); i++) |
| if (IS_ERR(clk[i])) |
| pr_err("i.MX6q clk %d: register failed with %ld\n", |
| i, PTR_ERR(clk[i])); |
| |
| clk_data.clks = clk; |
| clk_data.clk_num = ARRAY_SIZE(clk); |
| of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); |
| |
| clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); |
| clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); |
| clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); |
| clk_register_clkdev(clk[ahb], "ahb", NULL); |
| clk_register_clkdev(clk[cko1], "cko1", NULL); |
| clk_register_clkdev(clk[arm], NULL, "cpu0"); |
| |
| /* |
| * The gpmi needs 100MHz frequency in the EDO/Sync mode, |
| * We can not get the 100MHz from the pll2_pfd0_352m. |
| * So choose pll2_pfd2_396m as enfc_sel's parent. |
| */ |
| clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]); |
| |
| for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) |
| clk_prepare_enable(clk[clks_init_on[i]]); |
| |
| if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { |
| clk_prepare_enable(clk[usbphy1_gate]); |
| clk_prepare_enable(clk[usbphy2_gate]); |
| } |
| |
| /* Set initial power mode */ |
| imx6q_set_lpm(WAIT_CLOCKED); |
| |
| np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); |
| base = of_iomap(np, 0); |
| WARN_ON(!base); |
| irq = irq_of_parse_and_map(np, 0); |
| mxc_timer_init(base, irq); |
| |
| return 0; |
| } |