| /* radio-cadet.c - A video4linux driver for the ADS Cadet AM/FM Radio Card |
| * |
| * by Fred Gleason <fredg@wava.com> |
| * Version 0.3.3 |
| * |
| * (Loosely) based on code for the Aztech radio card by |
| * |
| * Russell Kroll (rkroll@exploits.org) |
| * Quay Ly |
| * Donald Song |
| * Jason Lewis (jlewis@twilight.vtc.vsc.edu) |
| * Scott McGrath (smcgrath@twilight.vtc.vsc.edu) |
| * William McGrath (wmcgrath@twilight.vtc.vsc.edu) |
| * |
| * History: |
| * 2000-04-29 Russell Kroll <rkroll@exploits.org> |
| * Added ISAPnP detection for Linux 2.3/2.4 |
| * |
| * 2001-01-10 Russell Kroll <rkroll@exploits.org> |
| * Removed dead CONFIG_RADIO_CADET_PORT code |
| * PnP detection on load is now default (no args necessary) |
| * |
| * 2002-01-17 Adam Belay <ambx1@neo.rr.com> |
| * Updated to latest pnp code |
| * |
| * 2003-01-31 Alan Cox <alan@lxorguk.ukuu.org.uk> |
| * Cleaned up locking, delay code, general odds and ends |
| * |
| * 2006-07-30 Hans J. Koch <koch@hjk-az.de> |
| * Changed API to V4L2 |
| */ |
| |
| #include <linux/version.h> |
| #include <linux/module.h> /* Modules */ |
| #include <linux/init.h> /* Initdata */ |
| #include <linux/ioport.h> /* request_region */ |
| #include <linux/delay.h> /* udelay */ |
| #include <linux/videodev2.h> /* V4L2 API defs */ |
| #include <linux/param.h> |
| #include <linux/pnp.h> |
| #include <linux/io.h> /* outb, outb_p */ |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| |
| MODULE_AUTHOR("Fred Gleason, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath"); |
| MODULE_DESCRIPTION("A driver for the ADS Cadet AM/FM/RDS radio card."); |
| MODULE_LICENSE("GPL"); |
| |
| static int io = -1; /* default to isapnp activation */ |
| static int radio_nr = -1; |
| |
| module_param(io, int, 0); |
| MODULE_PARM_DESC(io, "I/O address of Cadet card (0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e)"); |
| module_param(radio_nr, int, 0); |
| |
| #define CADET_VERSION KERNEL_VERSION(0, 3, 3) |
| |
| #define RDS_BUFFER 256 |
| #define RDS_RX_FLAG 1 |
| #define MBS_RX_FLAG 2 |
| |
| struct cadet { |
| struct v4l2_device v4l2_dev; |
| struct video_device vdev; |
| int io; |
| int users; |
| int curtuner; |
| int tunestat; |
| int sigstrength; |
| wait_queue_head_t read_queue; |
| struct timer_list readtimer; |
| __u8 rdsin, rdsout, rdsstat; |
| unsigned char rdsbuf[RDS_BUFFER]; |
| struct mutex lock; |
| int reading; |
| }; |
| |
| static struct cadet cadet_card; |
| |
| /* |
| * Signal Strength Threshold Values |
| * The V4L API spec does not define any particular unit for the signal |
| * strength value. These values are in microvolts of RF at the tuner's input. |
| */ |
| static __u16 sigtable[2][4] = { |
| { 5, 10, 30, 150 }, |
| { 28, 40, 63, 1000 } |
| }; |
| |
| |
| static int cadet_getstereo(struct cadet *dev) |
| { |
| int ret = V4L2_TUNER_SUB_MONO; |
| |
| if (dev->curtuner != 0) /* Only FM has stereo capability! */ |
| return V4L2_TUNER_SUB_MONO; |
| |
| mutex_lock(&dev->lock); |
| outb(7, dev->io); /* Select tuner control */ |
| if ((inb(dev->io + 1) & 0x40) == 0) |
| ret = V4L2_TUNER_SUB_STEREO; |
| mutex_unlock(&dev->lock); |
| return ret; |
| } |
| |
| static unsigned cadet_gettune(struct cadet *dev) |
| { |
| int curvol, i; |
| unsigned fifo = 0; |
| |
| /* |
| * Prepare for read |
| */ |
| |
| mutex_lock(&dev->lock); |
| |
| outb(7, dev->io); /* Select tuner control */ |
| curvol = inb(dev->io + 1); /* Save current volume/mute setting */ |
| outb(0x00, dev->io + 1); /* Ensure WRITE-ENABLE is LOW */ |
| dev->tunestat = 0xffff; |
| |
| /* |
| * Read the shift register |
| */ |
| for (i = 0; i < 25; i++) { |
| fifo = (fifo << 1) | ((inb(dev->io + 1) >> 7) & 0x01); |
| if (i < 24) { |
| outb(0x01, dev->io + 1); |
| dev->tunestat &= inb(dev->io + 1); |
| outb(0x00, dev->io + 1); |
| } |
| } |
| |
| /* |
| * Restore volume/mute setting |
| */ |
| outb(curvol, dev->io + 1); |
| mutex_unlock(&dev->lock); |
| |
| return fifo; |
| } |
| |
| static unsigned cadet_getfreq(struct cadet *dev) |
| { |
| int i; |
| unsigned freq = 0, test, fifo = 0; |
| |
| /* |
| * Read current tuning |
| */ |
| fifo = cadet_gettune(dev); |
| |
| /* |
| * Convert to actual frequency |
| */ |
| if (dev->curtuner == 0) { /* FM */ |
| test = 12500; |
| for (i = 0; i < 14; i++) { |
| if ((fifo & 0x01) != 0) |
| freq += test; |
| test = test << 1; |
| fifo = fifo >> 1; |
| } |
| freq -= 10700000; /* IF frequency is 10.7 MHz */ |
| freq = (freq * 16) / 1000000; /* Make it 1/16 MHz */ |
| } |
| if (dev->curtuner == 1) /* AM */ |
| freq = ((fifo & 0x7fff) - 2010) * 16; |
| |
| return freq; |
| } |
| |
| static void cadet_settune(struct cadet *dev, unsigned fifo) |
| { |
| int i; |
| unsigned test; |
| |
| mutex_lock(&dev->lock); |
| |
| outb(7, dev->io); /* Select tuner control */ |
| /* |
| * Write the shift register |
| */ |
| test = 0; |
| test = (fifo >> 23) & 0x02; /* Align data for SDO */ |
| test |= 0x1c; /* SDM=1, SWE=1, SEN=1, SCK=0 */ |
| outb(7, dev->io); /* Select tuner control */ |
| outb(test, dev->io + 1); /* Initialize for write */ |
| for (i = 0; i < 25; i++) { |
| test |= 0x01; /* Toggle SCK High */ |
| outb(test, dev->io + 1); |
| test &= 0xfe; /* Toggle SCK Low */ |
| outb(test, dev->io + 1); |
| fifo = fifo << 1; /* Prepare the next bit */ |
| test = 0x1c | ((fifo >> 23) & 0x02); |
| outb(test, dev->io + 1); |
| } |
| mutex_unlock(&dev->lock); |
| } |
| |
| static void cadet_setfreq(struct cadet *dev, unsigned freq) |
| { |
| unsigned fifo; |
| int i, j, test; |
| int curvol; |
| |
| /* |
| * Formulate a fifo command |
| */ |
| fifo = 0; |
| if (dev->curtuner == 0) { /* FM */ |
| test = 102400; |
| freq = (freq * 1000) / 16; /* Make it kHz */ |
| freq += 10700; /* IF is 10700 kHz */ |
| for (i = 0; i < 14; i++) { |
| fifo = fifo << 1; |
| if (freq >= test) { |
| fifo |= 0x01; |
| freq -= test; |
| } |
| test = test >> 1; |
| } |
| } |
| if (dev->curtuner == 1) { /* AM */ |
| fifo = (freq / 16) + 2010; /* Make it kHz */ |
| fifo |= 0x100000; /* Select AM Band */ |
| } |
| |
| /* |
| * Save current volume/mute setting |
| */ |
| |
| mutex_lock(&dev->lock); |
| outb(7, dev->io); /* Select tuner control */ |
| curvol = inb(dev->io + 1); |
| mutex_unlock(&dev->lock); |
| |
| /* |
| * Tune the card |
| */ |
| for (j = 3; j > -1; j--) { |
| cadet_settune(dev, fifo | (j << 16)); |
| |
| mutex_lock(&dev->lock); |
| outb(7, dev->io); /* Select tuner control */ |
| outb(curvol, dev->io + 1); |
| mutex_unlock(&dev->lock); |
| |
| msleep(100); |
| |
| cadet_gettune(dev); |
| if ((dev->tunestat & 0x40) == 0) { /* Tuned */ |
| dev->sigstrength = sigtable[dev->curtuner][j]; |
| return; |
| } |
| } |
| dev->sigstrength = 0; |
| } |
| |
| |
| static int cadet_getvol(struct cadet *dev) |
| { |
| int ret = 0; |
| |
| mutex_lock(&dev->lock); |
| |
| outb(7, dev->io); /* Select tuner control */ |
| if ((inb(dev->io + 1) & 0x20) != 0) |
| ret = 0xffff; |
| |
| mutex_unlock(&dev->lock); |
| return ret; |
| } |
| |
| |
| static void cadet_setvol(struct cadet *dev, int vol) |
| { |
| mutex_lock(&dev->lock); |
| outb(7, dev->io); /* Select tuner control */ |
| if (vol > 0) |
| outb(0x20, dev->io + 1); |
| else |
| outb(0x00, dev->io + 1); |
| mutex_unlock(&dev->lock); |
| } |
| |
| static void cadet_handler(unsigned long data) |
| { |
| struct cadet *dev = (void *)data; |
| |
| /* Service the RDS fifo */ |
| if (mutex_trylock(&dev->lock)) { |
| outb(0x3, dev->io); /* Select RDS Decoder Control */ |
| if ((inb(dev->io + 1) & 0x20) != 0) |
| printk(KERN_CRIT "cadet: RDS fifo overflow\n"); |
| outb(0x80, dev->io); /* Select RDS fifo */ |
| while ((inb(dev->io) & 0x80) != 0) { |
| dev->rdsbuf[dev->rdsin] = inb(dev->io + 1); |
| if (dev->rdsin == dev->rdsout) |
| printk(KERN_WARNING "cadet: RDS buffer overflow\n"); |
| else |
| dev->rdsin++; |
| } |
| mutex_unlock(&dev->lock); |
| } |
| |
| /* |
| * Service pending read |
| */ |
| if (dev->rdsin != dev->rdsout) |
| wake_up_interruptible(&dev->read_queue); |
| |
| /* |
| * Clean up and exit |
| */ |
| init_timer(&dev->readtimer); |
| dev->readtimer.function = cadet_handler; |
| dev->readtimer.data = (unsigned long)0; |
| dev->readtimer.expires = jiffies + msecs_to_jiffies(50); |
| add_timer(&dev->readtimer); |
| } |
| |
| |
| static ssize_t cadet_read(struct file *file, char __user *data, size_t count, loff_t *ppos) |
| { |
| struct cadet *dev = video_drvdata(file); |
| unsigned char readbuf[RDS_BUFFER]; |
| int i = 0; |
| |
| if (dev->rdsstat == 0) { |
| mutex_lock(&dev->lock); |
| dev->rdsstat = 1; |
| outb(0x80, dev->io); /* Select RDS fifo */ |
| mutex_unlock(&dev->lock); |
| init_timer(&dev->readtimer); |
| dev->readtimer.function = cadet_handler; |
| dev->readtimer.data = (unsigned long)dev; |
| dev->readtimer.expires = jiffies + msecs_to_jiffies(50); |
| add_timer(&dev->readtimer); |
| } |
| if (dev->rdsin == dev->rdsout) { |
| if (file->f_flags & O_NONBLOCK) |
| return -EWOULDBLOCK; |
| interruptible_sleep_on(&dev->read_queue); |
| } |
| while (i < count && dev->rdsin != dev->rdsout) |
| readbuf[i++] = dev->rdsbuf[dev->rdsout++]; |
| |
| if (copy_to_user(data, readbuf, i)) |
| return -EFAULT; |
| return i; |
| } |
| |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *v) |
| { |
| strlcpy(v->driver, "ADS Cadet", sizeof(v->driver)); |
| strlcpy(v->card, "ADS Cadet", sizeof(v->card)); |
| strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); |
| v->version = CADET_VERSION; |
| v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO | |
| V4L2_CAP_READWRITE | V4L2_CAP_RDS_CAPTURE; |
| return 0; |
| } |
| |
| static int vidioc_g_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| struct cadet *dev = video_drvdata(file); |
| |
| v->type = V4L2_TUNER_RADIO; |
| switch (v->index) { |
| case 0: |
| strlcpy(v->name, "FM", sizeof(v->name)); |
| v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS; |
| v->rangelow = 1400; /* 87.5 MHz */ |
| v->rangehigh = 1728; /* 108.0 MHz */ |
| v->rxsubchans = cadet_getstereo(dev); |
| switch (v->rxsubchans) { |
| case V4L2_TUNER_SUB_MONO: |
| v->audmode = V4L2_TUNER_MODE_MONO; |
| break; |
| case V4L2_TUNER_SUB_STEREO: |
| v->audmode = V4L2_TUNER_MODE_STEREO; |
| break; |
| default: |
| break; |
| } |
| v->rxsubchans |= V4L2_TUNER_SUB_RDS; |
| break; |
| case 1: |
| strlcpy(v->name, "AM", sizeof(v->name)); |
| v->capability = V4L2_TUNER_CAP_LOW; |
| v->rangelow = 8320; /* 520 kHz */ |
| v->rangehigh = 26400; /* 1650 kHz */ |
| v->rxsubchans = V4L2_TUNER_SUB_MONO; |
| v->audmode = V4L2_TUNER_MODE_MONO; |
| break; |
| default: |
| return -EINVAL; |
| } |
| v->signal = dev->sigstrength; /* We might need to modify scaling of this */ |
| return 0; |
| } |
| |
| static int vidioc_s_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| struct cadet *dev = video_drvdata(file); |
| |
| if (v->index != 0 && v->index != 1) |
| return -EINVAL; |
| dev->curtuner = v->index; |
| return 0; |
| } |
| |
| static int vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct cadet *dev = video_drvdata(file); |
| |
| f->tuner = dev->curtuner; |
| f->type = V4L2_TUNER_RADIO; |
| f->frequency = cadet_getfreq(dev); |
| return 0; |
| } |
| |
| |
| static int vidioc_s_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct cadet *dev = video_drvdata(file); |
| |
| if (f->type != V4L2_TUNER_RADIO) |
| return -EINVAL; |
| if (dev->curtuner == 0 && (f->frequency < 1400 || f->frequency > 1728)) |
| return -EINVAL; |
| if (dev->curtuner == 1 && (f->frequency < 8320 || f->frequency > 26400)) |
| return -EINVAL; |
| cadet_setfreq(dev, f->frequency); |
| return 0; |
| } |
| |
| static int vidioc_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *qc) |
| { |
| switch (qc->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); |
| case V4L2_CID_AUDIO_VOLUME: |
| return v4l2_ctrl_query_fill(qc, 0, 0xff, 1, 0xff); |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct cadet *dev = video_drvdata(file); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_MUTE: /* TODO: Handle this correctly */ |
| ctrl->value = (cadet_getvol(dev) == 0); |
| break; |
| case V4L2_CID_AUDIO_VOLUME: |
| ctrl->value = cadet_getvol(dev); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int vidioc_s_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct cadet *dev = video_drvdata(file); |
| |
| switch (ctrl->id){ |
| case V4L2_CID_AUDIO_MUTE: /* TODO: Handle this correctly */ |
| if (ctrl->value) |
| cadet_setvol(dev, 0); |
| else |
| cadet_setvol(dev, 0xffff); |
| break; |
| case V4L2_CID_AUDIO_VOLUME: |
| cadet_setvol(dev, ctrl->value); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) |
| { |
| *i = 0; |
| return 0; |
| } |
| |
| static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) |
| { |
| return i ? -EINVAL : 0; |
| } |
| |
| static int vidioc_g_audio(struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| a->index = 0; |
| strlcpy(a->name, "Radio", sizeof(a->name)); |
| a->capability = V4L2_AUDCAP_STEREO; |
| return 0; |
| } |
| |
| static int vidioc_s_audio(struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| return a->index ? -EINVAL : 0; |
| } |
| |
| static int cadet_open(struct file *file) |
| { |
| struct cadet *dev = video_drvdata(file); |
| |
| dev->users++; |
| if (1 == dev->users) |
| init_waitqueue_head(&dev->read_queue); |
| return 0; |
| } |
| |
| static int cadet_release(struct file *file) |
| { |
| struct cadet *dev = video_drvdata(file); |
| |
| dev->users--; |
| if (0 == dev->users) { |
| del_timer_sync(&dev->readtimer); |
| dev->rdsstat = 0; |
| } |
| return 0; |
| } |
| |
| static unsigned int cadet_poll(struct file *file, struct poll_table_struct *wait) |
| { |
| struct cadet *dev = video_drvdata(file); |
| |
| poll_wait(file, &dev->read_queue, wait); |
| if (dev->rdsin != dev->rdsout) |
| return POLLIN | POLLRDNORM; |
| return 0; |
| } |
| |
| |
| static const struct v4l2_file_operations cadet_fops = { |
| .owner = THIS_MODULE, |
| .open = cadet_open, |
| .release = cadet_release, |
| .read = cadet_read, |
| .ioctl = video_ioctl2, |
| .poll = cadet_poll, |
| }; |
| |
| static const struct v4l2_ioctl_ops cadet_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| .vidioc_queryctrl = vidioc_queryctrl, |
| .vidioc_g_ctrl = vidioc_g_ctrl, |
| .vidioc_s_ctrl = vidioc_s_ctrl, |
| .vidioc_g_audio = vidioc_g_audio, |
| .vidioc_s_audio = vidioc_s_audio, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| }; |
| |
| #ifdef CONFIG_PNP |
| |
| static struct pnp_device_id cadet_pnp_devices[] = { |
| /* ADS Cadet AM/FM Radio Card */ |
| {.id = "MSM0c24", .driver_data = 0}, |
| {.id = ""} |
| }; |
| |
| MODULE_DEVICE_TABLE(pnp, cadet_pnp_devices); |
| |
| static int cadet_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) |
| { |
| if (!dev) |
| return -ENODEV; |
| /* only support one device */ |
| if (io > 0) |
| return -EBUSY; |
| |
| if (!pnp_port_valid(dev, 0)) |
| return -ENODEV; |
| |
| io = pnp_port_start(dev, 0); |
| |
| printk(KERN_INFO "radio-cadet: PnP reports device at %#x\n", io); |
| |
| return io; |
| } |
| |
| static struct pnp_driver cadet_pnp_driver = { |
| .name = "radio-cadet", |
| .id_table = cadet_pnp_devices, |
| .probe = cadet_pnp_probe, |
| .remove = NULL, |
| }; |
| |
| #else |
| static struct pnp_driver cadet_pnp_driver; |
| #endif |
| |
| static void cadet_probe(struct cadet *dev) |
| { |
| static int iovals[8] = { 0x330, 0x332, 0x334, 0x336, 0x338, 0x33a, 0x33c, 0x33e }; |
| int i; |
| |
| for (i = 0; i < 8; i++) { |
| dev->io = iovals[i]; |
| if (request_region(dev->io, 2, "cadet-probe")) { |
| cadet_setfreq(dev, 1410); |
| if (cadet_getfreq(dev) == 1410) { |
| release_region(dev->io, 2); |
| return; |
| } |
| release_region(dev->io, 2); |
| } |
| } |
| dev->io = -1; |
| } |
| |
| /* |
| * io should only be set if the user has used something like |
| * isapnp (the userspace program) to initialize this card for us |
| */ |
| |
| static int __init cadet_init(void) |
| { |
| struct cadet *dev = &cadet_card; |
| struct v4l2_device *v4l2_dev = &dev->v4l2_dev; |
| int res; |
| |
| strlcpy(v4l2_dev->name, "cadet", sizeof(v4l2_dev->name)); |
| mutex_init(&dev->lock); |
| |
| /* If a probe was requested then probe ISAPnP first (safest) */ |
| if (io < 0) |
| pnp_register_driver(&cadet_pnp_driver); |
| dev->io = io; |
| |
| /* If that fails then probe unsafely if probe is requested */ |
| if (dev->io < 0) |
| cadet_probe(dev); |
| |
| /* Else we bail out */ |
| if (dev->io < 0) { |
| #ifdef MODULE |
| v4l2_err(v4l2_dev, "you must set an I/O address with io=0x330, 0x332, 0x334,\n"); |
| v4l2_err(v4l2_dev, "0x336, 0x338, 0x33a, 0x33c or 0x33e\n"); |
| #endif |
| goto fail; |
| } |
| if (!request_region(dev->io, 2, "cadet")) |
| goto fail; |
| |
| res = v4l2_device_register(NULL, v4l2_dev); |
| if (res < 0) { |
| release_region(dev->io, 2); |
| v4l2_err(v4l2_dev, "could not register v4l2_device\n"); |
| goto fail; |
| } |
| |
| strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name)); |
| dev->vdev.v4l2_dev = v4l2_dev; |
| dev->vdev.fops = &cadet_fops; |
| dev->vdev.ioctl_ops = &cadet_ioctl_ops; |
| dev->vdev.release = video_device_release_empty; |
| video_set_drvdata(&dev->vdev, dev); |
| |
| if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { |
| v4l2_device_unregister(v4l2_dev); |
| release_region(dev->io, 2); |
| goto fail; |
| } |
| v4l2_info(v4l2_dev, "ADS Cadet Radio Card at 0x%x\n", dev->io); |
| return 0; |
| fail: |
| pnp_unregister_driver(&cadet_pnp_driver); |
| return -ENODEV; |
| } |
| |
| static void __exit cadet_exit(void) |
| { |
| struct cadet *dev = &cadet_card; |
| |
| video_unregister_device(&dev->vdev); |
| v4l2_device_unregister(&dev->v4l2_dev); |
| release_region(dev->io, 2); |
| pnp_unregister_driver(&cadet_pnp_driver); |
| } |
| |
| module_init(cadet_init); |
| module_exit(cadet_exit); |
| |