Merge tag 'kvm-ppc-next-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
PPC KVM update for 4.16
- Allow HPT guests to run on a radix host on POWER9 v2.2 CPUs
without requiring the complex thread synchronization that earlier
CPU versions required.
- A series from Ben Herrenschmidt to improve the handling of
escalation interrupts with the XIVE interrupt controller.
- Provide for the decrementer register to be copied across on
migration.
- Various minor cleanups and bugfixes.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 70d3368..792fa87 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1841,6 +1841,7 @@
PPC | KVM_REG_PPC_DBSR | 32
PPC | KVM_REG_PPC_TIDR | 64
PPC | KVM_REG_PPC_PSSCR | 64
+ PPC | KVM_REG_PPC_DEC_EXPIRY | 64
PPC | KVM_REG_PPC_TM_GPR0 | 64
...
PPC | KVM_REG_PPC_TM_GPR31 | 64
diff --git a/arch/powerpc/include/asm/hmi.h b/arch/powerpc/include/asm/hmi.h
index 85b7a1a..9c14f7b 100644
--- a/arch/powerpc/include/asm/hmi.h
+++ b/arch/powerpc/include/asm/hmi.h
@@ -42,4 +42,8 @@
static inline void wait_for_subcore_guest_exit(void) { }
static inline void wait_for_tb_resync(void) { }
#endif
+
+struct pt_regs;
+extern long hmi_handle_debugtrig(struct pt_regs *regs);
+
#endif /* __ASM_PPC64_HMI_H__ */
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
index 735cfa3..998f7b7 100644
--- a/arch/powerpc/include/asm/kvm_book3s_64.h
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -122,13 +122,13 @@
lphi = (l >> 16) & 0xf;
switch ((l >> 12) & 0xf) {
case 0:
- return !lphi ? 24 : -1; /* 16MB */
+ return !lphi ? 24 : 0; /* 16MB */
break;
case 1:
return 16; /* 64kB */
break;
case 3:
- return !lphi ? 34 : -1; /* 16GB */
+ return !lphi ? 34 : 0; /* 16GB */
break;
case 7:
return (16 << 8) + 12; /* 64kB in 4kB */
@@ -140,7 +140,7 @@
return (24 << 8) + 12; /* 16MB in 4kB */
break;
}
- return -1;
+ return 0;
}
static inline int kvmppc_hpte_base_page_shift(unsigned long h, unsigned long l)
@@ -159,7 +159,11 @@
static inline unsigned long kvmppc_actual_pgsz(unsigned long v, unsigned long r)
{
- return 1ul << kvmppc_hpte_actual_page_shift(v, r);
+ int shift = kvmppc_hpte_actual_page_shift(v, r);
+
+ if (shift)
+ return 1ul << shift;
+ return 0;
}
static inline int kvmppc_pgsize_lp_encoding(int base_shift, int actual_shift)
@@ -232,7 +236,7 @@
va_low ^= v >> (SID_SHIFT_1T - 16);
va_low &= 0x7ff;
- if (b_pgshift == 12) {
+ if (b_pgshift <= 12) {
if (a_pgshift > 12) {
sllp = (a_pgshift == 16) ? 5 : 4;
rb |= sllp << 5; /* AP field */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index 3aa5b57..fef8133 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -709,6 +709,7 @@
u8 ceded;
u8 prodded;
u8 doorbell_request;
+ u8 irq_pending; /* Used by XIVE to signal pending guest irqs */
u32 last_inst;
struct swait_queue_head *wqp;
@@ -738,8 +739,11 @@
struct kvmppc_icp *icp; /* XICS presentation controller */
struct kvmppc_xive_vcpu *xive_vcpu; /* XIVE virtual CPU data */
__be32 xive_cam_word; /* Cooked W2 in proper endian with valid bit */
- u32 xive_pushed; /* Is the VP pushed on the physical CPU ? */
+ u8 xive_pushed; /* Is the VP pushed on the physical CPU ? */
+ u8 xive_esc_on; /* Is the escalation irq enabled ? */
union xive_tma_w01 xive_saved_state; /* W0..1 of XIVE thread state */
+ u64 xive_esc_raddr; /* Escalation interrupt ESB real addr */
+ u64 xive_esc_vaddr; /* Escalation interrupt ESB virt addr */
#endif
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 233c750..fc92674 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -1073,6 +1073,7 @@
/* Flags for OPAL_XIVE_GET/SET_VP_INFO */
enum {
OPAL_XIVE_VP_ENABLED = 0x00000001,
+ OPAL_XIVE_VP_SINGLE_ESCALATION = 0x00000002,
};
/* "Any chip" replacement for chip ID for allocation functions */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index b779f3c..14e41b8 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -432,8 +432,9 @@
#define SPRN_LPID 0x13F /* Logical Partition Identifier */
#endif
#define LPID_RSVD 0x3ff /* Reserved LPID for partn switching */
-#define SPRN_HMER 0x150 /* Hardware m? error recovery */
-#define SPRN_HMEER 0x151 /* Hardware m? enable error recovery */
+#define SPRN_HMER 0x150 /* Hypervisor maintenance exception reg */
+#define HMER_DEBUG_TRIG (1ul << (63 - 17)) /* Debug trigger */
+#define SPRN_HMEER 0x151 /* Hyp maintenance exception enable reg */
#define SPRN_PCR 0x152 /* Processor compatibility register */
#define PCR_VEC_DIS (1ul << (63-0)) /* Vec. disable (bit NA since POWER8) */
#define PCR_VSX_DIS (1ul << (63-1)) /* VSX disable (bit NA since POWER8) */
diff --git a/arch/powerpc/include/asm/xive-regs.h b/arch/powerpc/include/asm/xive-regs.h
index 1d3f2be..fa42888 100644
--- a/arch/powerpc/include/asm/xive-regs.h
+++ b/arch/powerpc/include/asm/xive-regs.h
@@ -10,6 +10,41 @@
#define _ASM_POWERPC_XIVE_REGS_H
/*
+ * "magic" Event State Buffer (ESB) MMIO offsets.
+ *
+ * Each interrupt source has a 2-bit state machine called ESB
+ * which can be controlled by MMIO. It's made of 2 bits, P and
+ * Q. P indicates that an interrupt is pending (has been sent
+ * to a queue and is waiting for an EOI). Q indicates that the
+ * interrupt has been triggered while pending.
+ *
+ * This acts as a coalescing mechanism in order to guarantee
+ * that a given interrupt only occurs at most once in a queue.
+ *
+ * When doing an EOI, the Q bit will indicate if the interrupt
+ * needs to be re-triggered.
+ *
+ * The following offsets into the ESB MMIO allow to read or
+ * manipulate the PQ bits. They must be used with an 8-bytes
+ * load instruction. They all return the previous state of the
+ * interrupt (atomically).
+ *
+ * Additionally, some ESB pages support doing an EOI via a
+ * store at 0 and some ESBs support doing a trigger via a
+ * separate trigger page.
+ */
+#define XIVE_ESB_STORE_EOI 0x400 /* Store */
+#define XIVE_ESB_LOAD_EOI 0x000 /* Load */
+#define XIVE_ESB_GET 0x800 /* Load */
+#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */
+#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */
+#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */
+#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */
+
+#define XIVE_ESB_VAL_P 0x2
+#define XIVE_ESB_VAL_Q 0x1
+
+/*
* Thread Management (aka "TM") registers
*/
diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
index 371fbeb..e602903 100644
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -58,6 +58,9 @@
#define XIVE_IRQ_FLAG_EOI_FW 0x10
#define XIVE_IRQ_FLAG_H_INT_ESB 0x20
+/* Special flag set by KVM for excalation interrupts */
+#define XIVE_IRQ_NO_EOI 0x80
+
#define XIVE_INVALID_CHIP_ID -1
/* A queue tracking structure in a CPU */
@@ -72,41 +75,6 @@
atomic_t pending_count;
};
-/*
- * "magic" Event State Buffer (ESB) MMIO offsets.
- *
- * Each interrupt source has a 2-bit state machine called ESB
- * which can be controlled by MMIO. It's made of 2 bits, P and
- * Q. P indicates that an interrupt is pending (has been sent
- * to a queue and is waiting for an EOI). Q indicates that the
- * interrupt has been triggered while pending.
- *
- * This acts as a coalescing mechanism in order to guarantee
- * that a given interrupt only occurs at most once in a queue.
- *
- * When doing an EOI, the Q bit will indicate if the interrupt
- * needs to be re-triggered.
- *
- * The following offsets into the ESB MMIO allow to read or
- * manipulate the PQ bits. They must be used with an 8-bytes
- * load instruction. They all return the previous state of the
- * interrupt (atomically).
- *
- * Additionally, some ESB pages support doing an EOI via a
- * store at 0 and some ESBs support doing a trigger via a
- * separate trigger page.
- */
-#define XIVE_ESB_STORE_EOI 0x400 /* Store */
-#define XIVE_ESB_LOAD_EOI 0x000 /* Load */
-#define XIVE_ESB_GET 0x800 /* Load */
-#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */
-#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */
-#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */
-#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */
-
-#define XIVE_ESB_VAL_P 0x2
-#define XIVE_ESB_VAL_Q 0x1
-
/* Global enable flags for the XIVE support */
extern bool __xive_enabled;
@@ -143,9 +111,10 @@
extern void xive_native_sync_source(u32 hw_irq);
extern bool is_xive_irq(struct irq_chip *chip);
-extern int xive_native_enable_vp(u32 vp_id);
+extern int xive_native_enable_vp(u32 vp_id, bool single_escalation);
extern int xive_native_disable_vp(u32 vp_id);
extern int xive_native_get_vp_info(u32 vp_id, u32 *out_cam_id, u32 *out_chip_id);
+extern bool xive_native_has_single_escalation(void);
#else
diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index 637b726..833ed9a 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -632,6 +632,8 @@
#define KVM_REG_PPC_TIDR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbc)
#define KVM_REG_PPC_PSSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbd)
+#define KVM_REG_PPC_DEC_EXPIRY (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xbe)
+
/* Transactional Memory checkpointed state:
* This is all GPRs, all VSX regs and a subset of SPRs
*/
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index f390d57..ff6ce2f 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -519,6 +519,7 @@
OFFSET(VCPU_PENDING_EXC, kvm_vcpu, arch.pending_exceptions);
OFFSET(VCPU_CEDED, kvm_vcpu, arch.ceded);
OFFSET(VCPU_PRODDED, kvm_vcpu, arch.prodded);
+ OFFSET(VCPU_IRQ_PENDING, kvm_vcpu, arch.irq_pending);
OFFSET(VCPU_DBELL_REQ, kvm_vcpu, arch.doorbell_request);
OFFSET(VCPU_MMCR, kvm_vcpu, arch.mmcr);
OFFSET(VCPU_PMC, kvm_vcpu, arch.pmc);
@@ -738,6 +739,9 @@
DEFINE(VCPU_XIVE_CAM_WORD, offsetof(struct kvm_vcpu,
arch.xive_cam_word));
DEFINE(VCPU_XIVE_PUSHED, offsetof(struct kvm_vcpu, arch.xive_pushed));
+ DEFINE(VCPU_XIVE_ESC_ON, offsetof(struct kvm_vcpu, arch.xive_esc_on));
+ DEFINE(VCPU_XIVE_ESC_RADDR, offsetof(struct kvm_vcpu, arch.xive_esc_raddr));
+ DEFINE(VCPU_XIVE_ESC_VADDR, offsetof(struct kvm_vcpu, arch.xive_esc_vaddr));
#endif
#ifdef CONFIG_KVM_EXIT_TIMING
diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c
index 742e465..d2fecae 100644
--- a/arch/powerpc/kernel/mce.c
+++ b/arch/powerpc/kernel/mce.c
@@ -495,37 +495,123 @@
return handled;
}
-long hmi_exception_realmode(struct pt_regs *regs)
+/* Possible meanings for HMER_DEBUG_TRIG bit being set on POWER9 */
+static enum {
+ DTRIG_UNKNOWN,
+ DTRIG_VECTOR_CI, /* need to emulate vector CI load instr */
+ DTRIG_SUSPEND_ESCAPE, /* need to escape from TM suspend mode */
+} hmer_debug_trig_function;
+
+static int init_debug_trig_function(void)
{
+ int pvr;
+ struct device_node *cpun;
+ struct property *prop = NULL;
+ const char *str;
+
+ /* First look in the device tree */
+ preempt_disable();
+ cpun = of_get_cpu_node(smp_processor_id(), NULL);
+ if (cpun) {
+ of_property_for_each_string(cpun, "ibm,hmi-special-triggers",
+ prop, str) {
+ if (strcmp(str, "bit17-vector-ci-load") == 0)
+ hmer_debug_trig_function = DTRIG_VECTOR_CI;
+ else if (strcmp(str, "bit17-tm-suspend-escape") == 0)
+ hmer_debug_trig_function = DTRIG_SUSPEND_ESCAPE;
+ }
+ of_node_put(cpun);
+ }
+ preempt_enable();
+
+ /* If we found the property, don't look at PVR */
+ if (prop)
+ goto out;
+
+ pvr = mfspr(SPRN_PVR);
+ /* Check for POWER9 Nimbus (scale-out) */
+ if ((PVR_VER(pvr) == PVR_POWER9) && (pvr & 0xe000) == 0) {
+ /* DD2.2 and later */
+ if ((pvr & 0xfff) >= 0x202)
+ hmer_debug_trig_function = DTRIG_SUSPEND_ESCAPE;
+ /* DD2.0 and DD2.1 - used for vector CI load emulation */
+ else if ((pvr & 0xfff) >= 0x200)
+ hmer_debug_trig_function = DTRIG_VECTOR_CI;
+ }
+
+ out:
+ switch (hmer_debug_trig_function) {
+ case DTRIG_VECTOR_CI:
+ pr_debug("HMI debug trigger used for vector CI load\n");
+ break;
+ case DTRIG_SUSPEND_ESCAPE:
+ pr_debug("HMI debug trigger used for TM suspend escape\n");
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+__initcall(init_debug_trig_function);
+
+/*
+ * Handle HMIs that occur as a result of a debug trigger.
+ * Return values:
+ * -1 means this is not a HMI cause that we know about
+ * 0 means no further handling is required
+ * 1 means further handling is required
+ */
+long hmi_handle_debugtrig(struct pt_regs *regs)
+{
+ unsigned long hmer = mfspr(SPRN_HMER);
+ long ret = 0;
+
+ /* HMER_DEBUG_TRIG bit is used for various workarounds on P9 */
+ if (!((hmer & HMER_DEBUG_TRIG)
+ && hmer_debug_trig_function != DTRIG_UNKNOWN))
+ return -1;
+
+ hmer &= ~HMER_DEBUG_TRIG;
+ /* HMER is a write-AND register */
+ mtspr(SPRN_HMER, ~HMER_DEBUG_TRIG);
+
+ switch (hmer_debug_trig_function) {
+ case DTRIG_VECTOR_CI:
+ /*
+ * Now to avoid problems with soft-disable we
+ * only do the emulation if we are coming from
+ * host user space
+ */
+ if (regs && user_mode(regs))
+ ret = local_paca->hmi_p9_special_emu = 1;
+
+ break;
+
+ default:
+ break;
+ }
+
+ /*
+ * See if any other HMI causes remain to be handled
+ */
+ if (hmer & mfspr(SPRN_HMEER))
+ return -1;
+
+ return ret;
+}
+
+/*
+ * Return values:
+ */
+long hmi_exception_realmode(struct pt_regs *regs)
+{
+ int ret;
+
__this_cpu_inc(irq_stat.hmi_exceptions);
-#ifdef CONFIG_PPC_BOOK3S_64
- /* Workaround for P9 vector CI loads (see p9_hmi_special_emu) */
- if (pvr_version_is(PVR_POWER9)) {
- unsigned long hmer = mfspr(SPRN_HMER);
-
- /* Do we have the debug bit set */
- if (hmer & PPC_BIT(17)) {
- hmer &= ~PPC_BIT(17);
- mtspr(SPRN_HMER, hmer);
-
- /*
- * Now to avoid problems with soft-disable we
- * only do the emulation if we are coming from
- * user space
- */
- if (user_mode(regs))
- local_paca->hmi_p9_special_emu = 1;
-
- /*
- * Don't bother going to OPAL if that's the
- * only relevant bit.
- */
- if (!(hmer & mfspr(SPRN_HMEER)))
- return local_paca->hmi_p9_special_emu;
- }
- }
-#endif /* CONFIG_PPC_BOOK3S_64 */
+ ret = hmi_handle_debugtrig(regs);
+ if (ret >= 0)
+ return ret;
wait_for_subcore_guest_exit();
diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c
index 58618f6..0c85481 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c
@@ -573,7 +573,7 @@
j = i + 1;
if (npages) {
set_dirty_bits(map, i, npages);
- i = j + npages;
+ j = i + npages;
}
}
return 0;
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 2d46037..e5f81fc 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -118,6 +118,9 @@
MODULE_PARM_DESC(h_ipi_redirect, "Redirect H_IPI wakeup to a free host core");
#endif
+/* If set, the threads on each CPU core have to be in the same MMU mode */
+static bool no_mixing_hpt_and_radix;
+
static void kvmppc_end_cede(struct kvm_vcpu *vcpu);
static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu);
@@ -1497,6 +1500,10 @@
case KVM_REG_PPC_ARCH_COMPAT:
*val = get_reg_val(id, vcpu->arch.vcore->arch_compat);
break;
+ case KVM_REG_PPC_DEC_EXPIRY:
+ *val = get_reg_val(id, vcpu->arch.dec_expires +
+ vcpu->arch.vcore->tb_offset);
+ break;
default:
r = -EINVAL;
break;
@@ -1724,6 +1731,10 @@
case KVM_REG_PPC_ARCH_COMPAT:
r = kvmppc_set_arch_compat(vcpu, set_reg_val(id, *val));
break;
+ case KVM_REG_PPC_DEC_EXPIRY:
+ vcpu->arch.dec_expires = set_reg_val(id, *val) -
+ vcpu->arch.vcore->tb_offset;
+ break;
default:
r = -EINVAL;
break;
@@ -2378,8 +2389,8 @@
static bool subcore_config_ok(int n_subcores, int n_threads)
{
/*
- * POWER9 "SMT4" cores are permanently in what is effectively a 4-way split-core
- * mode, with one thread per subcore.
+ * POWER9 "SMT4" cores are permanently in what is effectively a 4-way
+ * split-core mode, with one thread per subcore.
*/
if (cpu_has_feature(CPU_FTR_ARCH_300))
return n_subcores <= 4 && n_threads == 1;
@@ -2415,8 +2426,8 @@
if (!cpu_has_feature(CPU_FTR_ARCH_207S))
return false;
- /* POWER9 currently requires all threads to be in the same MMU mode */
- if (cpu_has_feature(CPU_FTR_ARCH_300) &&
+ /* Some POWER9 chips require all threads to be in the same MMU mode */
+ if (no_mixing_hpt_and_radix &&
kvm_is_radix(vc->kvm) != kvm_is_radix(cip->vc[0]->kvm))
return false;
@@ -2679,9 +2690,11 @@
* threads are offline. Also check if the number of threads in this
* guest are greater than the current system threads per guest.
* On POWER9, we need to be not in independent-threads mode if
- * this is a HPT guest on a radix host.
+ * this is a HPT guest on a radix host machine where the
+ * CPU threads may not be in different MMU modes.
*/
- hpt_on_radix = radix_enabled() && !kvm_is_radix(vc->kvm);
+ hpt_on_radix = no_mixing_hpt_and_radix && radix_enabled() &&
+ !kvm_is_radix(vc->kvm);
if (((controlled_threads > 1) &&
((vc->num_threads > threads_per_subcore) || !on_primary_thread())) ||
(hpt_on_radix && vc->kvm->arch.threads_indep)) {
@@ -2831,7 +2844,6 @@
*/
if (!thr0_done)
kvmppc_start_thread(NULL, pvc);
- thr += pvc->num_threads;
}
/*
@@ -2987,7 +2999,7 @@
{
if (!xive_enabled())
return false;
- return vcpu->arch.xive_saved_state.pipr <
+ return vcpu->arch.irq_pending || vcpu->arch.xive_saved_state.pipr <
vcpu->arch.xive_saved_state.cppr;
}
#else
@@ -3176,17 +3188,8 @@
* this thread straight away and have it join in.
*/
if (!signal_pending(current)) {
- if (vc->vcore_state == VCORE_PIGGYBACK) {
- if (spin_trylock(&vc->lock)) {
- if (vc->vcore_state == VCORE_RUNNING &&
- !VCORE_IS_EXITING(vc)) {
- kvmppc_create_dtl_entry(vcpu, vc);
- kvmppc_start_thread(vcpu, vc);
- trace_kvm_guest_enter(vcpu);
- }
- spin_unlock(&vc->lock);
- }
- } else if (vc->vcore_state == VCORE_RUNNING &&
+ if ((vc->vcore_state == VCORE_PIGGYBACK ||
+ vc->vcore_state == VCORE_RUNNING) &&
!VCORE_IS_EXITING(vc)) {
kvmppc_create_dtl_entry(vcpu, vc);
kvmppc_start_thread(vcpu, vc);
@@ -4448,6 +4451,19 @@
if (kvmppc_radix_possible())
r = kvmppc_radix_init();
+
+ /*
+ * POWER9 chips before version 2.02 can't have some threads in
+ * HPT mode and some in radix mode on the same core.
+ */
+ if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+ unsigned int pvr = mfspr(SPRN_PVR);
+ if ((pvr >> 16) == PVR_POWER9 &&
+ (((pvr & 0xe000) == 0 && (pvr & 0xfff) < 0x202) ||
+ ((pvr & 0xe000) == 0x2000 && (pvr & 0xfff) < 0x101)))
+ no_mixing_hpt_and_radix = true;
+ }
+
return r;
}
diff --git a/arch/powerpc/kvm/book3s_hv_ras.c b/arch/powerpc/kvm/book3s_hv_ras.c
index c356f9a..c296343 100644
--- a/arch/powerpc/kvm/book3s_hv_ras.c
+++ b/arch/powerpc/kvm/book3s_hv_ras.c
@@ -268,17 +268,19 @@
* secondary threads to proceed.
* - All secondary threads will eventually call opal hmi handler on
* their exit path.
+ *
+ * Returns 1 if the timebase offset should be applied, 0 if not.
*/
long kvmppc_realmode_hmi_handler(void)
{
- int ptid = local_paca->kvm_hstate.ptid;
bool resync_req;
- /* This is only called on primary thread. */
- BUG_ON(ptid != 0);
__this_cpu_inc(irq_stat.hmi_exceptions);
+ if (hmi_handle_debugtrig(NULL) >= 0)
+ return 1;
+
/*
* By now primary thread has already completed guest->host
* partition switch but haven't signaled secondaries yet.
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 9c61f73..b64f10a 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -617,13 +617,6 @@
lbz r0, KVM_RADIX(r9)
cmpwi cr7, r0, 0
- /* Clear out SLB if hash */
- bne cr7, 2f
- li r6,0
- slbmte r6,r6
- slbia
- ptesync
-2:
/*
* POWER7/POWER8 host -> guest partition switch code.
* We don't have to lock against concurrent tlbies,
@@ -738,19 +731,6 @@
10: cmpdi r4, 0
beq kvmppc_primary_no_guest
kvmppc_got_guest:
-
- /* Load up guest SLB entries (N.B. slb_max will be 0 for radix) */
- lwz r5,VCPU_SLB_MAX(r4)
- cmpwi r5,0
- beq 9f
- mtctr r5
- addi r6,r4,VCPU_SLB
-1: ld r8,VCPU_SLB_E(r6)
- ld r9,VCPU_SLB_V(r6)
- slbmte r9,r8
- addi r6,r6,VCPU_SLB_SIZE
- bdnz 1b
-9:
/* Increment yield count if they have a VPA */
ld r3, VCPU_VPA(r4)
cmpdi r3, 0
@@ -957,7 +937,6 @@
mftb r7
subf r3,r7,r8
mtspr SPRN_DEC,r3
- std r3,VCPU_DEC(r4)
ld r5, VCPU_SPRG0(r4)
ld r6, VCPU_SPRG1(r4)
@@ -1018,6 +997,29 @@
cmpdi r3, 512 /* 1 microsecond */
blt hdec_soon
+ /* For hash guest, clear out and reload the SLB */
+ ld r6, VCPU_KVM(r4)
+ lbz r0, KVM_RADIX(r6)
+ cmpwi r0, 0
+ bne 9f
+ li r6, 0
+ slbmte r6, r6
+ slbia
+ ptesync
+
+ /* Load up guest SLB entries (N.B. slb_max will be 0 for radix) */
+ lwz r5,VCPU_SLB_MAX(r4)
+ cmpwi r5,0
+ beq 9f
+ mtctr r5
+ addi r6,r4,VCPU_SLB
+1: ld r8,VCPU_SLB_E(r6)
+ ld r9,VCPU_SLB_V(r6)
+ slbmte r9,r8
+ addi r6,r6,VCPU_SLB_SIZE
+ bdnz 1b
+9:
+
#ifdef CONFIG_KVM_XICS
/* We are entering the guest on that thread, push VCPU to XIVE */
ld r10, HSTATE_XIVE_TIMA_PHYS(r13)
@@ -1031,8 +1033,53 @@
li r9, TM_QW1_OS + TM_WORD2
stwcix r11,r9,r10
li r9, 1
- stw r9, VCPU_XIVE_PUSHED(r4)
+ stb r9, VCPU_XIVE_PUSHED(r4)
eieio
+
+ /*
+ * We clear the irq_pending flag. There is a small chance of a
+ * race vs. the escalation interrupt happening on another
+ * processor setting it again, but the only consequence is to
+ * cause a spurrious wakeup on the next H_CEDE which is not an
+ * issue.
+ */
+ li r0,0
+ stb r0, VCPU_IRQ_PENDING(r4)
+
+ /*
+ * In single escalation mode, if the escalation interrupt is
+ * on, we mask it.
+ */
+ lbz r0, VCPU_XIVE_ESC_ON(r4)
+ cmpwi r0,0
+ beq 1f
+ ld r10, VCPU_XIVE_ESC_RADDR(r4)
+ li r9, XIVE_ESB_SET_PQ_01
+ ldcix r0, r10, r9
+ sync
+
+ /* We have a possible subtle race here: The escalation interrupt might
+ * have fired and be on its way to the host queue while we mask it,
+ * and if we unmask it early enough (re-cede right away), there is
+ * a theorical possibility that it fires again, thus landing in the
+ * target queue more than once which is a big no-no.
+ *
+ * Fortunately, solving this is rather easy. If the above load setting
+ * PQ to 01 returns a previous value where P is set, then we know the
+ * escalation interrupt is somewhere on its way to the host. In that
+ * case we simply don't clear the xive_esc_on flag below. It will be
+ * eventually cleared by the handler for the escalation interrupt.
+ *
+ * Then, when doing a cede, we check that flag again before re-enabling
+ * the escalation interrupt, and if set, we abort the cede.
+ */
+ andi. r0, r0, XIVE_ESB_VAL_P
+ bne- 1f
+
+ /* Now P is 0, we can clear the flag */
+ li r0, 0
+ stb r0, VCPU_XIVE_ESC_ON(r4)
+1:
no_xive:
#endif /* CONFIG_KVM_XICS */
@@ -1193,7 +1240,7 @@
addi r3, r4, VCPU_TB_RMEXIT
bl kvmhv_accumulate_time
#endif
- b guest_exit_cont
+ b guest_bypass
/******************************************************************************
* *
@@ -1423,15 +1470,35 @@
blt deliver_guest_interrupt
guest_exit_cont: /* r9 = vcpu, r12 = trap, r13 = paca */
+ /* Save more register state */
+ mfdar r6
+ mfdsisr r7
+ std r6, VCPU_DAR(r9)
+ stw r7, VCPU_DSISR(r9)
+ /* don't overwrite fault_dar/fault_dsisr if HDSI */
+ cmpwi r12,BOOK3S_INTERRUPT_H_DATA_STORAGE
+ beq mc_cont
+ std r6, VCPU_FAULT_DAR(r9)
+ stw r7, VCPU_FAULT_DSISR(r9)
+
+ /* See if it is a machine check */
+ cmpwi r12, BOOK3S_INTERRUPT_MACHINE_CHECK
+ beq machine_check_realmode
+mc_cont:
+#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
+ addi r3, r9, VCPU_TB_RMEXIT
+ mr r4, r9
+ bl kvmhv_accumulate_time
+#endif
#ifdef CONFIG_KVM_XICS
/* We are exiting, pull the VP from the XIVE */
- lwz r0, VCPU_XIVE_PUSHED(r9)
+ lbz r0, VCPU_XIVE_PUSHED(r9)
cmpwi cr0, r0, 0
beq 1f
li r7, TM_SPC_PULL_OS_CTX
li r6, TM_QW1_OS
mfmsr r0
- andi. r0, r0, MSR_IR /* in real mode? */
+ andi. r0, r0, MSR_DR /* in real mode? */
beq 2f
ld r10, HSTATE_XIVE_TIMA_VIRT(r13)
cmpldi cr0, r10, 0
@@ -1454,33 +1521,42 @@
/* Fixup some of the state for the next load */
li r10, 0
li r0, 0xff
- stw r10, VCPU_XIVE_PUSHED(r9)
+ stb r10, VCPU_XIVE_PUSHED(r9)
stb r10, (VCPU_XIVE_SAVED_STATE+3)(r9)
stb r0, (VCPU_XIVE_SAVED_STATE+4)(r9)
eieio
1:
#endif /* CONFIG_KVM_XICS */
- /* Save more register state */
- mfdar r6
- mfdsisr r7
- std r6, VCPU_DAR(r9)
- stw r7, VCPU_DSISR(r9)
- /* don't overwrite fault_dar/fault_dsisr if HDSI */
- cmpwi r12,BOOK3S_INTERRUPT_H_DATA_STORAGE
- beq mc_cont
- std r6, VCPU_FAULT_DAR(r9)
- stw r7, VCPU_FAULT_DSISR(r9)
- /* See if it is a machine check */
- cmpwi r12, BOOK3S_INTERRUPT_MACHINE_CHECK
- beq machine_check_realmode
-mc_cont:
-#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
- addi r3, r9, VCPU_TB_RMEXIT
- mr r4, r9
- bl kvmhv_accumulate_time
-#endif
+ /* For hash guest, read the guest SLB and save it away */
+ ld r5, VCPU_KVM(r9)
+ lbz r0, KVM_RADIX(r5)
+ li r5, 0
+ cmpwi r0, 0
+ bne 3f /* for radix, save 0 entries */
+ lwz r0,VCPU_SLB_NR(r9) /* number of entries in SLB */
+ mtctr r0
+ li r6,0
+ addi r7,r9,VCPU_SLB
+1: slbmfee r8,r6
+ andis. r0,r8,SLB_ESID_V@h
+ beq 2f
+ add r8,r8,r6 /* put index in */
+ slbmfev r3,r6
+ std r8,VCPU_SLB_E(r7)
+ std r3,VCPU_SLB_V(r7)
+ addi r7,r7,VCPU_SLB_SIZE
+ addi r5,r5,1
+2: addi r6,r6,1
+ bdnz 1b
+ /* Finally clear out the SLB */
+ li r0,0
+ slbmte r0,r0
+ slbia
+ ptesync
+3: stw r5,VCPU_SLB_MAX(r9)
+guest_bypass:
mr r3, r12
/* Increment exit count, poke other threads to exit */
bl kvmhv_commence_exit
@@ -1501,31 +1577,6 @@
ori r6,r6,1
mtspr SPRN_CTRLT,r6
4:
- /* Check if we are running hash or radix and store it in cr2 */
- ld r5, VCPU_KVM(r9)
- lbz r0, KVM_RADIX(r5)
- cmpwi cr2,r0,0
-
- /* Read the guest SLB and save it away */
- li r5, 0
- bne cr2, 3f /* for radix, save 0 entries */
- lwz r0,VCPU_SLB_NR(r9) /* number of entries in SLB */
- mtctr r0
- li r6,0
- addi r7,r9,VCPU_SLB
-1: slbmfee r8,r6
- andis. r0,r8,SLB_ESID_V@h
- beq 2f
- add r8,r8,r6 /* put index in */
- slbmfev r3,r6
- std r8,VCPU_SLB_E(r7)
- std r3,VCPU_SLB_V(r7)
- addi r7,r7,VCPU_SLB_SIZE
- addi r5,r5,1
-2: addi r6,r6,1
- bdnz 1b
-3: stw r5,VCPU_SLB_MAX(r9)
-
/*
* Save the guest PURR/SPURR
*/
@@ -1803,7 +1854,7 @@
ld r5, VCPU_KVM(r9)
lbz r0, KVM_RADIX(r5)
cmpwi cr2, r0, 0
- beq cr2, 3f
+ beq cr2, 4f
/* Radix: Handle the case where the guest used an illegal PID */
LOAD_REG_ADDR(r4, mmu_base_pid)
@@ -1839,15 +1890,9 @@
BEGIN_FTR_SECTION
PPC_INVALIDATE_ERAT
END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1)
- b 4f
+4:
#endif /* CONFIG_PPC_RADIX_MMU */
- /* Hash: clear out SLB */
-3: li r5,0
- slbmte r5,r5
- slbia
- ptesync
-4:
/*
* POWER7/POWER8 guest -> host partition switch code.
* We don't have to lock against tlbies but we do
@@ -1908,16 +1953,17 @@
bne 27f
bl kvmppc_realmode_hmi_handler
nop
+ cmpdi r3, 0
li r12, BOOK3S_INTERRUPT_HMI
/*
- * At this point kvmppc_realmode_hmi_handler would have resync-ed
- * the TB. Hence it is not required to subtract guest timebase
- * offset from timebase. So, skip it.
+ * At this point kvmppc_realmode_hmi_handler may have resync-ed
+ * the TB, and if it has, we must not subtract the guest timebase
+ * offset from the timebase. So, skip it.
*
* Also, do not call kvmppc_subcore_exit_guest() because it has
* been invoked as part of kvmppc_realmode_hmi_handler().
*/
- b 30f
+ beq 30f
27:
/* Subtract timebase offset from timebase */
@@ -2744,7 +2790,32 @@
/* we've ceded but we want to give control to the host */
kvm_cede_exit:
ld r9, HSTATE_KVM_VCPU(r13)
- b guest_exit_cont
+#ifdef CONFIG_KVM_XICS
+ /* Abort if we still have a pending escalation */
+ lbz r5, VCPU_XIVE_ESC_ON(r9)
+ cmpwi r5, 0
+ beq 1f
+ li r0, 0
+ stb r0, VCPU_CEDED(r9)
+1: /* Enable XIVE escalation */
+ li r5, XIVE_ESB_SET_PQ_00
+ mfmsr r0
+ andi. r0, r0, MSR_DR /* in real mode? */
+ beq 1f
+ ld r10, VCPU_XIVE_ESC_VADDR(r9)
+ cmpdi r10, 0
+ beq 3f
+ ldx r0, r10, r5
+ b 2f
+1: ld r10, VCPU_XIVE_ESC_RADDR(r9)
+ cmpdi r10, 0
+ beq 3f
+ ldcix r0, r10, r5
+2: sync
+ li r0, 1
+ stb r0, VCPU_XIVE_ESC_ON(r9)
+#endif /* CONFIG_KVM_XICS */
+3: b guest_exit_cont
/* Try to handle a machine check in real mode */
machine_check_realmode:
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
index 0d750d2..badfdbb 100644
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -84,12 +84,22 @@
{
struct kvm_vcpu *vcpu = data;
- /* We use the existing H_PROD mechanism to wake up the target */
- vcpu->arch.prodded = 1;
+ vcpu->arch.irq_pending = 1;
smp_mb();
if (vcpu->arch.ceded)
kvmppc_fast_vcpu_kick(vcpu);
+ /* Since we have the no-EOI flag, the interrupt is effectively
+ * disabled now. Clearing xive_esc_on means we won't bother
+ * doing so on the next entry.
+ *
+ * This also allows the entry code to know that if a PQ combination
+ * of 10 is observed while xive_esc_on is true, it means the queue
+ * contains an unprocessed escalation interrupt. We don't make use of
+ * that knowledge today but might (see comment in book3s_hv_rmhandler.S)
+ */
+ vcpu->arch.xive_esc_on = false;
+
return IRQ_HANDLED;
}
@@ -112,19 +122,21 @@
return -EIO;
}
- /*
- * Future improvement: start with them disabled
- * and handle DD2 and later scheme of merged escalation
- * interrupts
- */
- name = kasprintf(GFP_KERNEL, "kvm-%d-%d-%d",
- vcpu->kvm->arch.lpid, xc->server_num, prio);
+ if (xc->xive->single_escalation)
+ name = kasprintf(GFP_KERNEL, "kvm-%d-%d",
+ vcpu->kvm->arch.lpid, xc->server_num);
+ else
+ name = kasprintf(GFP_KERNEL, "kvm-%d-%d-%d",
+ vcpu->kvm->arch.lpid, xc->server_num, prio);
if (!name) {
pr_err("Failed to allocate escalation irq name for queue %d of VCPU %d\n",
prio, xc->server_num);
rc = -ENOMEM;
goto error;
}
+
+ pr_devel("Escalation %s irq %d (prio %d)\n", name, xc->esc_virq[prio], prio);
+
rc = request_irq(xc->esc_virq[prio], xive_esc_irq,
IRQF_NO_THREAD, name, vcpu);
if (rc) {
@@ -133,6 +145,25 @@
goto error;
}
xc->esc_virq_names[prio] = name;
+
+ /* In single escalation mode, we grab the ESB MMIO of the
+ * interrupt and mask it. Also populate the VCPU v/raddr
+ * of the ESB page for use by asm entry/exit code. Finally
+ * set the XIVE_IRQ_NO_EOI flag which will prevent the
+ * core code from performing an EOI on the escalation
+ * interrupt, thus leaving it effectively masked after
+ * it fires once.
+ */
+ if (xc->xive->single_escalation) {
+ struct irq_data *d = irq_get_irq_data(xc->esc_virq[prio]);
+ struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+
+ xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_01);
+ vcpu->arch.xive_esc_raddr = xd->eoi_page;
+ vcpu->arch.xive_esc_vaddr = (__force u64)xd->eoi_mmio;
+ xd->flags |= XIVE_IRQ_NO_EOI;
+ }
+
return 0;
error:
irq_dispose_mapping(xc->esc_virq[prio]);
@@ -191,12 +222,12 @@
pr_devel("Provisioning prio... %d\n", prio);
- /* Provision each VCPU and enable escalations */
+ /* Provision each VCPU and enable escalations if needed */
kvm_for_each_vcpu(i, vcpu, kvm) {
if (!vcpu->arch.xive_vcpu)
continue;
rc = xive_provision_queue(vcpu, prio);
- if (rc == 0)
+ if (rc == 0 && !xive->single_escalation)
xive_attach_escalation(vcpu, prio);
if (rc)
return rc;
@@ -1082,6 +1113,7 @@
/* Allocate IPI */
xc->vp_ipi = xive_native_alloc_irq();
if (!xc->vp_ipi) {
+ pr_err("Failed to allocate xive irq for VCPU IPI\n");
r = -EIO;
goto bail;
}
@@ -1092,18 +1124,33 @@
goto bail;
/*
+ * Enable the VP first as the single escalation mode will
+ * affect escalation interrupts numbering
+ */
+ r = xive_native_enable_vp(xc->vp_id, xive->single_escalation);
+ if (r) {
+ pr_err("Failed to enable VP in OPAL, err %d\n", r);
+ goto bail;
+ }
+
+ /*
* Initialize queues. Initially we set them all for no queueing
* and we enable escalation for queue 0 only which we'll use for
* our mfrr change notifications. If the VCPU is hot-plugged, we
- * do handle provisioning however.
+ * do handle provisioning however based on the existing "map"
+ * of enabled queues.
*/
for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
struct xive_q *q = &xc->queues[i];
+ /* Single escalation, no queue 7 */
+ if (i == 7 && xive->single_escalation)
+ break;
+
/* Is queue already enabled ? Provision it */
if (xive->qmap & (1 << i)) {
r = xive_provision_queue(vcpu, i);
- if (r == 0)
+ if (r == 0 && !xive->single_escalation)
xive_attach_escalation(vcpu, i);
if (r)
goto bail;
@@ -1123,11 +1170,6 @@
if (r)
goto bail;
- /* Enable the VP */
- r = xive_native_enable_vp(xc->vp_id);
- if (r)
- goto bail;
-
/* Route the IPI */
r = xive_native_configure_irq(xc->vp_ipi, xc->vp_id, 0, XICS_IPI);
if (!r)
@@ -1474,6 +1516,7 @@
pr_devel(" val=0x016%llx (server=0x%x, guest_prio=%d)\n",
val, server, guest_prio);
+
/*
* If the source doesn't already have an IPI, allocate
* one and get the corresponding data
@@ -1762,6 +1805,8 @@
if (xive->vp_base == XIVE_INVALID_VP)
ret = -ENOMEM;
+ xive->single_escalation = xive_native_has_single_escalation();
+
if (ret) {
kfree(xive);
return ret;
@@ -1795,6 +1840,7 @@
kvm_for_each_vcpu(i, vcpu, kvm) {
struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ unsigned int i;
if (!xc)
continue;
@@ -1804,6 +1850,33 @@
xc->server_num, xc->cppr, xc->hw_cppr,
xc->mfrr, xc->pending,
xc->stat_rm_h_xirr, xc->stat_vm_h_xirr);
+ for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
+ struct xive_q *q = &xc->queues[i];
+ u32 i0, i1, idx;
+
+ if (!q->qpage && !xc->esc_virq[i])
+ continue;
+
+ seq_printf(m, " [q%d]: ", i);
+
+ if (q->qpage) {
+ idx = q->idx;
+ i0 = be32_to_cpup(q->qpage + idx);
+ idx = (idx + 1) & q->msk;
+ i1 = be32_to_cpup(q->qpage + idx);
+ seq_printf(m, "T=%d %08x %08x... \n", q->toggle, i0, i1);
+ }
+ if (xc->esc_virq[i]) {
+ struct irq_data *d = irq_get_irq_data(xc->esc_virq[i]);
+ struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+ u64 pq = xive_vm_esb_load(xd, XIVE_ESB_GET);
+ seq_printf(m, "E:%c%c I(%d:%llx:%llx)",
+ (pq & XIVE_ESB_VAL_P) ? 'P' : 'p',
+ (pq & XIVE_ESB_VAL_Q) ? 'Q' : 'q',
+ xc->esc_virq[i], pq, xd->eoi_page);
+ seq_printf(m, "\n");
+ }
+ }
t_rm_h_xirr += xc->stat_rm_h_xirr;
t_rm_h_ipoll += xc->stat_rm_h_ipoll;
diff --git a/arch/powerpc/kvm/book3s_xive.h b/arch/powerpc/kvm/book3s_xive.h
index 6ba63f8..a08ae6f 100644
--- a/arch/powerpc/kvm/book3s_xive.h
+++ b/arch/powerpc/kvm/book3s_xive.h
@@ -120,6 +120,8 @@
u32 q_order;
u32 q_page_order;
+ /* Flags */
+ u8 single_escalation;
};
#define KVMPPC_XIVE_Q_COUNT 8
@@ -201,25 +203,20 @@
* is as follow.
*
* Guest request for 0...6 are honored. Guest request for anything
- * higher results in a priority of 7 being applied.
- *
- * However, when XIRR is returned via H_XIRR, 7 is translated to 0xb
- * in order to match AIX expectations
+ * higher results in a priority of 6 being applied.
*
* Similar mapping is done for CPPR values
*/
static inline u8 xive_prio_from_guest(u8 prio)
{
- if (prio == 0xff || prio < 8)
+ if (prio == 0xff || prio < 6)
return prio;
- return 7;
+ return 6;
}
static inline u8 xive_prio_to_guest(u8 prio)
{
- if (prio == 0xff || prio < 7)
- return prio;
- return 0xb;
+ return prio;
}
static inline u32 __xive_read_eq(__be32 *qpage, u32 msk, u32 *idx, u32 *toggle)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 545a230..748562e 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -763,7 +763,7 @@
hrtimer_init(&vcpu->arch.dec_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
vcpu->arch.dec_timer.function = kvmppc_decrementer_wakeup;
- vcpu->arch.dec_expires = ~(u64)0;
+ vcpu->arch.dec_expires = get_tb();
#ifdef CONFIG_KVM_EXIT_TIMING
mutex_init(&vcpu->arch.exit_timing_lock);
@@ -1106,11 +1106,9 @@
{
enum emulation_result emulated = EMULATE_DONE;
- /* Currently, mmio_vsx_copy_nums only allowed to be less than 4 */
- if ( (vcpu->arch.mmio_vsx_copy_nums > 4) ||
- (vcpu->arch.mmio_vsx_copy_nums < 0) ) {
+ /* Currently, mmio_vsx_copy_nums only allowed to be 4 or less */
+ if (vcpu->arch.mmio_vsx_copy_nums > 4)
return EMULATE_FAIL;
- }
while (vcpu->arch.mmio_vsx_copy_nums) {
emulated = __kvmppc_handle_load(run, vcpu, rt, bytes,
@@ -1252,11 +1250,9 @@
vcpu->arch.io_gpr = rs;
- /* Currently, mmio_vsx_copy_nums only allowed to be less than 4 */
- if ( (vcpu->arch.mmio_vsx_copy_nums > 4) ||
- (vcpu->arch.mmio_vsx_copy_nums < 0) ) {
+ /* Currently, mmio_vsx_copy_nums only allowed to be 4 or less */
+ if (vcpu->arch.mmio_vsx_copy_nums > 4)
return EMULATE_FAIL;
- }
while (vcpu->arch.mmio_vsx_copy_nums) {
if (kvmppc_get_vsr_data(vcpu, rs, &val) == -1)
diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c
index e44d2b2..1c03c97 100644
--- a/arch/powerpc/kvm/timing.c
+++ b/arch/powerpc/kvm/timing.c
@@ -143,8 +143,7 @@
int i;
u64 min, max, sum, sum_quad;
- seq_printf(m, "%s", "type count min max sum sum_squared\n");
-
+ seq_puts(m, "type count min max sum sum_squared\n");
for (i = 0; i < __NUMBER_OF_KVM_EXIT_TYPES; i++) {
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index a3b8d7d..2547b60 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -367,7 +367,8 @@
* EOI the source if it hasn't been disabled and hasn't
* been passed-through to a KVM guest
*/
- if (!irqd_irq_disabled(d) && !irqd_is_forwarded_to_vcpu(d))
+ if (!irqd_irq_disabled(d) && !irqd_is_forwarded_to_vcpu(d) &&
+ !(xd->flags & XIVE_IRQ_NO_EOI))
xive_do_source_eoi(irqd_to_hwirq(d), xd);
/*
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index ebc244b..d22aeb0 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -42,6 +42,7 @@
static u32 xive_queue_shift;
static u32 xive_pool_vps = XIVE_INVALID_VP;
static struct kmem_cache *xive_provision_cache;
+static bool xive_has_single_esc;
int xive_native_populate_irq_data(u32 hw_irq, struct xive_irq_data *data)
{
@@ -571,6 +572,10 @@
break;
}
+ /* Do we support single escalation */
+ if (of_get_property(np, "single-escalation-support", NULL) != NULL)
+ xive_has_single_esc = true;
+
/* Configure Thread Management areas for KVM */
for_each_possible_cpu(cpu)
kvmppc_set_xive_tima(cpu, r.start, tima);
@@ -667,12 +672,15 @@
}
EXPORT_SYMBOL_GPL(xive_native_free_vp_block);
-int xive_native_enable_vp(u32 vp_id)
+int xive_native_enable_vp(u32 vp_id, bool single_escalation)
{
s64 rc;
+ u64 flags = OPAL_XIVE_VP_ENABLED;
+ if (single_escalation)
+ flags |= OPAL_XIVE_VP_SINGLE_ESCALATION;
for (;;) {
- rc = opal_xive_set_vp_info(vp_id, OPAL_XIVE_VP_ENABLED, 0);
+ rc = opal_xive_set_vp_info(vp_id, flags, 0);
if (rc != OPAL_BUSY)
break;
msleep(1);
@@ -710,3 +718,9 @@
return 0;
}
EXPORT_SYMBOL_GPL(xive_native_get_vp_info);
+
+bool xive_native_has_single_escalation(void)
+{
+ return xive_has_single_esc;
+}
+EXPORT_SYMBOL_GPL(xive_native_has_single_escalation);