ARM: OMAP3LOGIC: Adding LogicPD OMAP3 board support
Adding support for LogicPD's OMAP 3530 LV SOM and
OMAP 35x Torpedo board.
Signed-off-by: Tim Nordell <tim.nordell@logicpd.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
new file mode 100644
index 0000000..ac3b0f7
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3logic.c
+ *
+ * Copyright (C) 2010 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Copyright (C) 2010 Logic Product Development, Inc.
+ * Peter Barada <peter.barada@logicpd.com>
+ *
+ * Modified from Beagle, EVM, and RX51
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <linux/regulator/machine.h>
+
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "mux.h"
+
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/timer-gp.h>
+#include <plat/sdrc.h>
+#include <plat/control.h>
+
+#define OMAP3LOGIC_SMSC911X_CS 1
+
+#define OMAP3530_LV_SOM_MMC_GPIO_CD 110
+#define OMAP3530_LV_SOM_MMC_GPIO_WP 126
+#define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ 152
+
+#define OMAP3_TORPEDO_MMC_GPIO_CD 127
+#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129
+
+static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3logic_vmmc1 = {
+ .constraints = {
+ .name = "VMMC1",
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3logic_vmmc1_supply,
+};
+
+static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .pullups = BIT(1),
+ .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8)
+ | BIT(13) | BIT(15) | BIT(16) | BIT(17),
+};
+
+static struct twl4030_platform_data omap3logic_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &omap3logic_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &omap3logic_twldata,
+ },
+};
+
+static int __init omap3logic_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo,
+ ARRAY_SIZE(omap3logic_i2c_boardinfo));
+ return 0;
+}
+
+static void __init omap3logic_init_irq(void)
+{
+ omap2_init_common_hw(NULL, NULL);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static void __init omap3logic_init(void)
+{
+ omap3logic_i2c_init();
+ omap_serial_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+}
+
+MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_map_io,
+ .init_irq = omap3logic_init_irq,
+ .init_machine = omap3logic_init,
+ .timer = &omap_timer,
+MACHINE_END
+
+MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_map_io,
+ .init_irq = omap3logic_init_irq,
+ .init_machine = omap3logic_init,
+ .timer = &omap_timer,
+MACHINE_END