| /* |
| * drivers/pci/rom.c |
| * |
| * (C) Copyright 2004 Jon Smirl <jonsmirl@yahoo.com> |
| * (C) Copyright 2004 Silicon Graphics, Inc. Jesse Barnes <jbarnes@sgi.com> |
| * |
| * PCI ROM access routines |
| */ |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| |
| #include "pci.h" |
| |
| /** |
| * pci_enable_rom - enable ROM decoding for a PCI device |
| * @pdev: PCI device to enable |
| * |
| * Enable ROM decoding on @dev. This involves simply turning on the last |
| * bit of the PCI ROM BAR. Note that some cards may share address decoders |
| * between the ROM and other resources, so enabling it may disable access |
| * to MMIO registers or other card memory. |
| */ |
| int pci_enable_rom(struct pci_dev *pdev) |
| { |
| struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; |
| struct pci_bus_region region; |
| u32 rom_addr; |
| |
| if (!res->flags) |
| return -1; |
| |
| /* Nothing to enable if we're using a shadow copy in RAM */ |
| if (res->flags & IORESOURCE_ROM_SHADOW) |
| return 0; |
| |
| /* |
| * Ideally pci_update_resource() would update the ROM BAR address, |
| * and we would only set the enable bit here. But apparently some |
| * devices have buggy ROM BARs that read as zero when disabled. |
| */ |
| pcibios_resource_to_bus(pdev->bus, ®ion, res); |
| pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_addr); |
| rom_addr &= ~PCI_ROM_ADDRESS_MASK; |
| rom_addr |= region.start | PCI_ROM_ADDRESS_ENABLE; |
| pci_write_config_dword(pdev, pdev->rom_base_reg, rom_addr); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pci_enable_rom); |
| |
| /** |
| * pci_disable_rom - disable ROM decoding for a PCI device |
| * @pdev: PCI device to disable |
| * |
| * Disable ROM decoding on a PCI device by turning off the last bit in the |
| * ROM BAR. |
| */ |
| void pci_disable_rom(struct pci_dev *pdev) |
| { |
| struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; |
| u32 rom_addr; |
| |
| if (res->flags & IORESOURCE_ROM_SHADOW) |
| return; |
| |
| pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_addr); |
| rom_addr &= ~PCI_ROM_ADDRESS_ENABLE; |
| pci_write_config_dword(pdev, pdev->rom_base_reg, rom_addr); |
| } |
| EXPORT_SYMBOL_GPL(pci_disable_rom); |
| |
| /** |
| * pci_get_rom_size - obtain the actual size of the ROM image |
| * @pdev: target PCI device |
| * @rom: kernel virtual pointer to image of ROM |
| * @size: size of PCI window |
| * return: size of actual ROM image |
| * |
| * Determine the actual length of the ROM image. |
| * The PCI window size could be much larger than the |
| * actual image size. |
| */ |
| size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size) |
| { |
| void __iomem *image; |
| int last_image; |
| unsigned length; |
| |
| image = rom; |
| do { |
| void __iomem *pds; |
| /* Standard PCI ROMs start out with these bytes 55 AA */ |
| if (readw(image) != 0xAA55) { |
| dev_err(&pdev->dev, "Invalid PCI ROM header signature: expecting 0xaa55, got %#06x\n", |
| readw(image)); |
| break; |
| } |
| /* get the PCI data structure and check its "PCIR" signature */ |
| pds = image + readw(image + 24); |
| if (readl(pds) != 0x52494350) { |
| dev_err(&pdev->dev, "Invalid PCI ROM data signature: expecting 0x52494350, got %#010x\n", |
| readl(pds)); |
| break; |
| } |
| last_image = readb(pds + 21) & 0x80; |
| length = readw(pds + 16); |
| image += length * 512; |
| /* Avoid iterating through memory outside the resource window */ |
| if (image > rom + size) |
| break; |
| } while (length && !last_image); |
| |
| /* never return a size larger than the PCI resource window */ |
| /* there are known ROMs that get the size wrong */ |
| return min((size_t)(image - rom), size); |
| } |
| |
| /** |
| * pci_map_rom - map a PCI ROM to kernel space |
| * @pdev: pointer to pci device struct |
| * @size: pointer to receive size of pci window over ROM |
| * |
| * Return: kernel virtual pointer to image of ROM |
| * |
| * Map a PCI ROM into kernel space. If ROM is boot video ROM, |
| * the shadow BIOS copy will be returned instead of the |
| * actual ROM. |
| */ |
| void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) |
| { |
| struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; |
| loff_t start; |
| void __iomem *rom; |
| |
| /* assign the ROM an address if it doesn't have one */ |
| if (res->parent == NULL && pci_assign_resource(pdev, PCI_ROM_RESOURCE)) |
| return NULL; |
| |
| start = pci_resource_start(pdev, PCI_ROM_RESOURCE); |
| *size = pci_resource_len(pdev, PCI_ROM_RESOURCE); |
| if (*size == 0) |
| return NULL; |
| |
| /* Enable ROM space decodes */ |
| if (pci_enable_rom(pdev)) |
| return NULL; |
| |
| rom = ioremap(start, *size); |
| if (!rom) |
| goto err_ioremap; |
| |
| /* |
| * Try to find the true size of the ROM since sometimes the PCI window |
| * size is much larger than the actual size of the ROM. |
| * True size is important if the ROM is going to be copied. |
| */ |
| *size = pci_get_rom_size(pdev, rom, *size); |
| if (!*size) |
| goto invalid_rom; |
| |
| return rom; |
| |
| invalid_rom: |
| iounmap(rom); |
| err_ioremap: |
| /* restore enable if ioremap fails */ |
| if (!(res->flags & IORESOURCE_ROM_ENABLE)) |
| pci_disable_rom(pdev); |
| return NULL; |
| } |
| EXPORT_SYMBOL(pci_map_rom); |
| |
| /** |
| * pci_unmap_rom - unmap the ROM from kernel space |
| * @pdev: pointer to pci device struct |
| * @rom: virtual address of the previous mapping |
| * |
| * Remove a mapping of a previously mapped ROM |
| */ |
| void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom) |
| { |
| struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; |
| |
| iounmap(rom); |
| |
| /* Disable again before continuing */ |
| if (!(res->flags & IORESOURCE_ROM_ENABLE)) |
| pci_disable_rom(pdev); |
| } |
| EXPORT_SYMBOL(pci_unmap_rom); |
| |
| /** |
| * pci_platform_rom - provides a pointer to any ROM image provided by the |
| * platform |
| * @pdev: pointer to pci device struct |
| * @size: pointer to receive size of pci window over ROM |
| */ |
| void __iomem *pci_platform_rom(struct pci_dev *pdev, size_t *size) |
| { |
| if (pdev->rom && pdev->romlen) { |
| *size = pdev->romlen; |
| return phys_to_virt((phys_addr_t)pdev->rom); |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(pci_platform_rom); |