| /* |
| * atmel-pcm-dma.c -- ALSA PCM DMA support for the Atmel SoC. |
| * |
| * Copyright (C) 2012 Atmel |
| * |
| * Author: Bo Shen <voice.shen@atmel.com> |
| * |
| * Based on atmel-pcm by: |
| * Sedji Gaouaou <sedji.gaouaou@atmel.com> |
| * Copyright 2008 Atmel |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/atmel-ssc.h> |
| #include <linux/platform_data/dma-atmel.h> |
| |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/dmaengine_pcm.h> |
| |
| #include "atmel-pcm.h" |
| |
| /*--------------------------------------------------------------------------*\ |
| * Hardware definition |
| \*--------------------------------------------------------------------------*/ |
| static const struct snd_pcm_hardware atmel_pcm_dma_hardware = { |
| .info = SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_RESUME | |
| SNDRV_PCM_INFO_PAUSE, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .period_bytes_min = 256, /* lighting DMA overhead */ |
| .period_bytes_max = 2 * 0xffff, /* if 2 bytes format */ |
| .periods_min = 8, |
| .periods_max = 1024, /* no limit */ |
| .buffer_bytes_max = ATMEL_SSC_DMABUF_SIZE, |
| }; |
| |
| /** |
| * atmel_pcm_dma_irq: SSC interrupt handler for DMAENGINE enabled SSC |
| * |
| * We use DMAENGINE to send/receive data to/from SSC so this ISR is only to |
| * check if any overrun occured. |
| */ |
| static void atmel_pcm_dma_irq(u32 ssc_sr, |
| struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct atmel_pcm_dma_params *prtd; |
| |
| prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); |
| |
| if (ssc_sr & prtd->mask->ssc_error) { |
| if (snd_pcm_running(substream)) |
| pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x)\n", |
| substream->stream == SNDRV_PCM_STREAM_PLAYBACK |
| ? "underrun" : "overrun", prtd->name, |
| ssc_sr); |
| |
| /* stop RX and capture: will be enabled again at restart */ |
| ssc_writex(prtd->ssc->regs, SSC_CR, prtd->mask->ssc_disable); |
| snd_pcm_stream_lock(substream); |
| snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); |
| snd_pcm_stream_unlock(substream); |
| |
| /* now drain RHR and read status to remove xrun condition */ |
| ssc_readx(prtd->ssc->regs, SSC_RHR); |
| ssc_readx(prtd->ssc->regs, SSC_SR); |
| } |
| } |
| |
| static int atmel_pcm_configure_dma(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct atmel_pcm_dma_params *prtd; |
| struct ssc_device *ssc; |
| int ret; |
| |
| prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); |
| ssc = prtd->ssc; |
| |
| ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config); |
| if (ret) { |
| pr_err("atmel-pcm: hwparams to dma slave configure failed\n"); |
| return ret; |
| } |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| slave_config->dst_addr = ssc->phybase + SSC_THR; |
| slave_config->dst_maxburst = 1; |
| } else { |
| slave_config->src_addr = ssc->phybase + SSC_RHR; |
| slave_config->src_maxburst = 1; |
| } |
| |
| prtd->dma_intr_handler = atmel_pcm_dma_irq; |
| |
| return 0; |
| } |
| |
| static const struct snd_dmaengine_pcm_config atmel_dmaengine_pcm_config = { |
| .prepare_slave_config = atmel_pcm_configure_dma, |
| .pcm_hardware = &atmel_pcm_dma_hardware, |
| .prealloc_buffer_size = ATMEL_SSC_DMABUF_SIZE, |
| }; |
| |
| int atmel_pcm_dma_platform_register(struct device *dev) |
| { |
| return snd_dmaengine_pcm_register(dev, &atmel_dmaengine_pcm_config, |
| SND_DMAENGINE_PCM_FLAG_NO_RESIDUE); |
| } |
| EXPORT_SYMBOL(atmel_pcm_dma_platform_register); |
| |
| void atmel_pcm_dma_platform_unregister(struct device *dev) |
| { |
| snd_dmaengine_pcm_unregister(dev); |
| } |
| EXPORT_SYMBOL(atmel_pcm_dma_platform_unregister); |
| |
| MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); |
| MODULE_DESCRIPTION("Atmel DMA based PCM module"); |
| MODULE_LICENSE("GPL"); |