mtd: nand: lpc32xx: switch to mtd_ooblayout_ops
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
index 8e43978..8523881 100644
--- a/drivers/mtd/nand/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -138,22 +138,37 @@
unsigned num_parts;
};
-static struct nand_ecclayout lpc32xx_nand_oob = {
- .eccbytes = 40,
- .eccpos = { 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
- .oobfree = {
- { .offset = 0,
- .length = 6, },
- { .offset = 16,
- .length = 6, },
- { .offset = 32,
- .length = 6, },
- { .offset = 48,
- .length = 6, },
- },
+static int lpc32xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = ((section + 1) * 16) - nand_chip->ecc.bytes;
+ oobregion->length = nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static int lpc32xx_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_chip *nand_chip = mtd_to_nand(mtd);
+
+ if (section >= nand_chip->ecc.steps)
+ return -ERANGE;
+
+ oobregion->offset = 16 * section;
+ oobregion->length = 16 - nand_chip->ecc.bytes;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops lpc32xx_ooblayout_ops = {
+ .ecc = lpc32xx_ooblayout_ecc,
+ .free = lpc32xx_ooblayout_free,
};
static struct nand_bbt_descr lpc32xx_nand_bbt = {
@@ -712,6 +727,7 @@
nand_chip->ecc.write_oob = lpc32xx_write_oob;
nand_chip->ecc.read_oob = lpc32xx_read_oob;
nand_chip->ecc.strength = 4;
+ nand_chip->ecc.bytes = 10;
nand_chip->waitfunc = lpc32xx_waitfunc;
nand_chip->options = NAND_NO_SUBPAGE_WRITE;
@@ -750,7 +766,7 @@
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.size = 512;
- nand_chip->ecc.layout = &lpc32xx_nand_oob;
+ mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
host->mlcsubpages = mtd->writesize / 512;
/* initially clear interrupt status */