V4L/DVB (3599b): Whitespace cleanups under drivers/media
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 1f8a46b..f31a198 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -370,7 +370,7 @@
#
menu "V4L USB devices"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_DEV
source "drivers/media/video/em28xx/Kconfig"
@@ -528,17 +528,17 @@
---help---
Say Y here if you want support for cameras based on OV681 or
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
-
+
This driver has an optional plugin, which is distributed as a
- separate module only (released under GPL). It allows to use higher
- resolutions and framerates, but cannot be included in the official
+ separate module only (released under GPL). It allows to use higher
+ resolutions and framerates, but cannot be included in the official
Linux kernel for performance purposes.
See <file:Documentation/usb/w9968cf.txt> for more informations.
This driver uses the Video For Linux and the I2C APIs. It needs the
OmniVision Camera Chip support as well. You must say Y or M to
- "Video For Linux", "I2C Support" and "OmniVision Camera Chip
+ "Video For Linux", "I2C Support" and "OmniVision Camera Chip
support" to use this driver.
To compile this driver as a module, choose M here: the
@@ -564,20 +564,20 @@
depends on USB && VIDEO_DEV
---help---
Say Y or M here if you want to use one of these Philips & OEM
- webcams:
- * Philips PCA645, PCA646
- * Philips PCVC675, PCVC680, PCVC690
- * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
+ webcams:
+ * Philips PCA645, PCA646
+ * Philips PCVC675, PCVC680, PCVC690
+ * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
* Askey VC010
- * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'
- and 'Orbit'/'Sphere'
- * Samsung MPC-C10, MPC-C30
+ * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'
+ and 'Orbit'/'Sphere'
+ * Samsung MPC-C10, MPC-C30
* Creative Webcam 5, Pro Ex
* SOTEC Afina Eye
* Visionite VCS-UC300, VCS-UM100
-
+
The PCA635, PCVC665 and PCVC720/20 are not supported by this driver
- and never will be, but the 665 and 720/20 are supported by other
+ and never will be, but the 665 and 720/20 are supported by other
drivers.
See <file:Documentation/usb/philips.txt> for more information and
diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
index 671e36d..4870958 100644
--- a/drivers/media/video/adv7170.c
+++ b/drivers/media/video/adv7170.c
@@ -1,9 +1,9 @@
-/*
+/*
* adv7170 - adv7170, adv7171 video encoder driver version 0.0.1
*
* Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
*
- * Based on adv7176 driver by:
+ * Based on adv7176 driver by:
*
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
* Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net>
@@ -173,7 +173,7 @@
static const unsigned char init_NTSC[] = {
0x00, 0x10, // MR0
0x01, 0x20, // MR1
- 0x02, 0x0e, // MR2 RTC control: bits 2 and 1
+ 0x02, 0x0e, // MR2 RTC control: bits 2 and 1
0x03, 0x80, // MR3
0x04, 0x30, // MR4
0x05, 0x00, // Reserved
@@ -196,7 +196,7 @@
0x16, 0x00, // CGMS_WSS_0
0x17, 0x00, // CGMS_WSS_1
0x18, 0x00, // CGMS_WSS_2
- 0x19, 0x00, // Teletext Ctl
+ 0x19, 0x00, // Teletext Ctl
};
static const unsigned char init_PAL[] = {
@@ -381,7 +381,7 @@
};
static unsigned short ignore = I2C_CLIENT_END;
-
+
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
index 085e886..68e7d7a 100644
--- a/drivers/media/video/adv7175.c
+++ b/drivers/media/video/adv7175.c
@@ -1,4 +1,4 @@
-/*
+/*
* adv7175 - adv7175a video encoder driver version 0.0.3
*
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
@@ -233,7 +233,7 @@
sizeof(init_common));
adv7175_write(client, 0x07, TR0MODE | TR0RST);
adv7175_write(client, 0x07, TR0MODE);
- break;
+ break;
case ENCODER_GET_CAPABILITIES:
{
@@ -399,7 +399,7 @@
};
static unsigned short ignore = I2C_CLIENT_END;
-
+
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index c586f64..dbe0251 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -161,39 +161,39 @@
{
int i;
- /* Slave Address */
- ar_outl(addr, PLDI2CDATA);
+ /* Slave Address */
+ ar_outl(addr, PLDI2CDATA);
wait_for_vsync();
- /* Start */
- ar_outl(1, PLDI2CCND);
+ /* Start */
+ ar_outl(1, PLDI2CCND);
wait_acknowledge();
/* Transfer data 1 */
- ar_outl(data1, PLDI2CDATA);
+ ar_outl(data1, PLDI2CDATA);
wait_for_vsync();
- ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
+ ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
wait_acknowledge();
/* Transfer data 2 */
- ar_outl(data2, PLDI2CDATA);
+ ar_outl(data2, PLDI2CDATA);
wait_for_vsync();
- ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
+ ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
wait_acknowledge();
if (n == 3) {
/* Transfer data 3 */
- ar_outl(data3, PLDI2CDATA);
+ ar_outl(data3, PLDI2CDATA);
wait_for_vsync();
- ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
+ ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
wait_acknowledge();
- }
+ }
- /* Stop */
+ /* Stop */
for (i = 0; i < 100; i++)
cpu_relax();
- ar_outl(2, PLDI2CCND);
- ar_outl(2, PLDI2CCND);
+ ar_outl(2, PLDI2CCND);
+ ar_outl(2, PLDI2CCND);
while (ar_inl(PLDI2CSTS) & PLDI2CSTS_BB)
cpu_relax();
@@ -204,24 +204,24 @@
{
DEBUG(1, "init_iic:\n");
- /*
+ /*
* ICU Setting (iic)
*/
- /* I2C Setting */
- ar_outl(0x0, PLDI2CCR); /* I2CCR Disable */
- ar_outl(0x0300, PLDI2CMOD); /* I2CMOD ACK/8b-data/7b-addr/auto */
- ar_outl(0x1, PLDI2CACK); /* I2CACK ACK */
+ /* I2C Setting */
+ ar_outl(0x0, PLDI2CCR); /* I2CCR Disable */
+ ar_outl(0x0300, PLDI2CMOD); /* I2CMOD ACK/8b-data/7b-addr/auto */
+ ar_outl(0x1, PLDI2CACK); /* I2CACK ACK */
/* I2C CLK */
- /* 50MH-100k */
+ /* 50MH-100k */
if (freq == 75) {
- ar_outl(369, PLDI2CFREQ); /* BCLK = 75MHz */
+ ar_outl(369, PLDI2CFREQ); /* BCLK = 75MHz */
} else if (freq == 50) {
ar_outl(244, PLDI2CFREQ); /* BCLK = 50MHz */
} else {
ar_outl(244, PLDI2CFREQ); /* default: BCLK = 50MHz */
}
- ar_outl(0x1, PLDI2CCR); /* I2CCR Enable */
+ ar_outl(0x1, PLDI2CCR); /* I2CCR Enable */
}
/**************************************************************************
@@ -253,7 +253,7 @@
/*
* check HCOUNT because we cannot check vertical sync.
- */
+ */
for (; tmout >= 0; tmout--) {
l = ar_inl(ARVHCOUNT);
if (l == exp_line)
@@ -562,8 +562,8 @@
/* operations for interlace mode */
if ( line_count < (AR_HEIGHT_VGA/2) ) /* even line */
line_number = (line_count << 1);
- else /* odd line */
- line_number =
+ else /* odd line */
+ line_number =
(((line_count - (AR_HEIGHT_VGA/2)) << 1) + 1);
} else {
line_number = line_count;
@@ -651,7 +651,7 @@
cr |= ARVCR1_NORMAL;
ar_outl(cr, ARVCR1);
- /*
+ /*
* Initialize IIC so that CPU can communicate with AR LSI,
* and send boot commands to AR LSI.
*/
@@ -846,7 +846,7 @@
* so register video device as a frame grabber type.
* device is named "video[0-64]".
* video_register_device() initializes h/w using ar_initialize().
- */
+ */
if (video_register_device(ar->vdev, VFL_TYPE_GRABBER, video_nr) != 0) {
/* return -1, -ENFILE(full) or others */
printk("arv: register video (Colour AR) failed.\n");
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index d8a18a6..e7b38fd 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -1,4 +1,4 @@
-/*
+/*
* bt819 - BT819A VideoStream Decoder (Rockwell Part)
*
* Copyright (C) 1999 Mike Bernson <mike@mlb.org>
@@ -6,7 +6,7 @@
*
* Modifications for LML33/DC10plus unified driver
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
+ *
* Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
* - moved over to linux>=2.4.x i2c protocol (9/9/2002)
*
@@ -206,9 +206,9 @@
Bug in the bt819 stepping on my board?
*/
0x14, 0x00, /* 0x14 Vertial Scaling lsb */
- 0x16, 0x07, /* 0x16 Video Timing Polarity
+ 0x16, 0x07, /* 0x16 Video Timing Polarity
ACTIVE=active low
- FIELD: high=odd,
+ FIELD: high=odd,
vreset=active high,
hreset=active high */
0x18, 0x68, /* 0x18 AGC Delay */
@@ -497,7 +497,7 @@
};
static unsigned short ignore = I2C_CLIENT_END;
-
+
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c
index 4d47a0a..af3b61d 100644
--- a/drivers/media/video/bt856.c
+++ b/drivers/media/video/bt856.c
@@ -1,4 +1,4 @@
-/*
+/*
* bt856 - BT856A Digital Video Encoder (Rockwell Part)
*
* Copyright (C) 1999 Mike Bernson <mike@mlb.org>
@@ -285,7 +285,7 @@
static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END };
static unsigned short ignore = I2C_CLIENT_END;
-
+
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index d97b7d8..cf61c59 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -150,7 +150,7 @@
static struct qcam_device *qcam_init(struct parport *port)
{
struct qcam_device *q;
-
+
q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
if(q==NULL)
return NULL;
@@ -158,16 +158,16 @@
q->pport = port;
q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
NULL, 0, NULL);
- if (q->pdev == NULL)
+ if (q->pdev == NULL)
{
printk(KERN_ERR "bw-qcam: couldn't register for %s.\n",
port->name);
kfree(q);
return NULL;
}
-
+
memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
-
+
mutex_init(&q->lock);
q->port_mode = (QC_ANY | QC_NOTSET);
@@ -236,12 +236,12 @@
while (!((status = read_lpstatus(q)) & 8))
{
/* 1000 is enough spins on the I/O for all normal
- cases, at that point we start to poll slowly
+ cases, at that point we start to poll slowly
until the camera wakes up. However, we are
busy blocked until the camera responds, so
setting it lower is much better for interactive
response. */
-
+
if(runs++>maxpoll)
{
msleep_interruptible(5);
@@ -255,12 +255,12 @@
while (((status = read_lpstatus(q)) & 8))
{
/* 1000 is enough spins on the I/O for all normal
- cases, at that point we start to poll slowly
+ cases, at that point we start to poll slowly
until the camera wakes up. However, we are
busy blocked until the camera responds, so
setting it lower is much better for interactive
response. */
-
+
if(runs++>maxpoll)
{
msleep_interruptible(5);
@@ -282,17 +282,17 @@
{
unsigned int status;
int runs=0;
-
- do
+
+ do
{
status = read_lpdata(q);
/* 1000 is enough spins on the I/O for all normal
- cases, at that point we start to poll slowly
+ cases, at that point we start to poll slowly
until the camera wakes up. However, we are
busy blocked until the camera responds, so
setting it lower is much better for interactive
response. */
-
+
if(runs++>maxpoll)
{
msleep_interruptible(5);
@@ -321,7 +321,7 @@
lastreg = reg = read_lpstatus(q) & 0xf0;
- for (i = 0; i < 500; i++)
+ for (i = 0; i < 500; i++)
{
reg = read_lpstatus(q) & 0xf0;
if (reg != lastreg)
@@ -357,7 +357,7 @@
static void qc_reset(struct qcam_device *q)
{
- switch (q->port_mode & QC_FORCE_MASK)
+ switch (q->port_mode & QC_FORCE_MASK)
{
case QC_FORCE_UNIDIR:
q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
@@ -370,7 +370,7 @@
case QC_ANY:
write_lpcontrol(q, 0x20);
write_lpdata(q, 0x75);
-
+
if (read_lpdata(q) != 0x75) {
q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
} else {
@@ -398,8 +398,8 @@
static int qc_setscanmode(struct qcam_device *q)
{
int old_mode = q->mode;
-
- switch (q->transfer_scale)
+
+ switch (q->transfer_scale)
{
case 1:
q->mode = 0;
@@ -412,7 +412,7 @@
break;
}
- switch (q->bpp)
+ switch (q->bpp)
{
case 4:
break;
@@ -421,7 +421,7 @@
break;
}
- switch (q->port_mode & QC_MODE_MASK)
+ switch (q->port_mode & QC_MODE_MASK)
{
case QC_BIDIR:
q->mode += 1;
@@ -430,10 +430,10 @@
case QC_UNIDIR:
break;
}
-
+
if (q->mode != old_mode)
q->status |= QC_PARAM_CHANGE;
-
+
return 0;
}
@@ -451,7 +451,7 @@
/* Set the brightness. Yes, this is repetitive, but it works.
* Shorter versions seem to fail subtly. Feel free to try :-). */
/* I think the problem was in qc_command, not here -- bls */
-
+
qc_command(q, 0xb);
qc_command(q, q->brightness);
@@ -502,13 +502,13 @@
unsigned int hi2, lo2;
static int state = 0;
- if (buffer == NULL)
+ if (buffer == NULL)
{
state = 0;
return 0;
}
-
- switch (q->port_mode & QC_MODE_MASK)
+
+ switch (q->port_mode & QC_MODE_MASK)
{
case QC_BIDIR: /* Bi-directional Port */
write_lpcontrol(q, 0x26);
@@ -517,7 +517,7 @@
write_lpcontrol(q, 0x2e);
lo2 = (qc_waithand2(q, 0) >> 1);
hi2 = (read_lpstatus(q) >> 3) & 0x1f;
- switch (q->bpp)
+ switch (q->bpp)
{
case 4:
buffer[0] = lo & 0xf;
@@ -544,7 +544,7 @@
write_lpcontrol(q, 0xe);
hi = (qc_waithand(q, 0) & 0xf0) >> 4;
- switch (q->bpp)
+ switch (q->bpp)
{
case 4:
buffer[0] = lo;
@@ -552,7 +552,7 @@
ret = 2;
break;
case 6:
- switch (state)
+ switch (state)
{
case 0:
buffer[0] = (lo << 2) | ((hi & 0xc) >> 2);
@@ -604,13 +604,13 @@
int shift=8-q->bpp;
char invert;
- if (q->mode == -1)
+ if (q->mode == -1)
return -ENXIO;
qc_command(q, 0x7);
qc_command(q, q->mode);
- if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
+ if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
{
write_lpcontrol(q, 0x2e); /* turn port around */
write_lpcontrol(q, 0x26);
@@ -618,7 +618,7 @@
write_lpcontrol(q, 0x2e);
(void) qc_waithand(q, 0);
}
-
+
/* strange -- should be 15:63 below, but 4bpp is odd */
invert = (q->bpp == 4) ? 16 : 63;
@@ -629,15 +629,15 @@
q->transfer_scale;
transperline = (transperline + divisor - 1) / divisor;
- for (i = 0, yield = yieldlines; i < linestotrans; i++)
+ for (i = 0, yield = yieldlines; i < linestotrans; i++)
{
- for (pixels_read = j = 0; j < transperline; j++)
+ for (pixels_read = j = 0; j < transperline; j++)
{
bytes = qc_readbytes(q, buffer);
- for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++)
+ for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++)
{
int o;
- if (buffer[k] == 0 && invert == 16)
+ if (buffer[k] == 0 && invert == 16)
{
/* 4bpp is odd (again) -- inverter is 16, not 15, but output
must be 0-15 -- bls */
@@ -653,7 +653,7 @@
pixels_read += bytes;
}
(void) qc_readbytes(q, NULL); /* reset state machine */
-
+
/* Grabbing an entire frame from the quickcam is a lengthy
process. We don't (usually) want to busy-block the
processor for the entire frame. yieldlines is a module
@@ -666,7 +666,7 @@
}
}
- if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
+ if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
{
write_lpcontrol(q, 2);
write_lpcontrol(q, 6);
@@ -687,7 +687,7 @@
{
struct video_device *dev = video_devdata(file);
struct qcam_device *qcam=(struct qcam_device *)dev;
-
+
switch(cmd)
{
case VIDIOCGCAP:
@@ -762,7 +762,7 @@
return -EINVAL;
if(p->depth!=4 && p->depth!=6)
return -EINVAL;
-
+
/*
* Now load the camera.
*/
@@ -790,11 +790,11 @@
return -EINVAL;
if(vw->width<80||vw->width>320)
return -EINVAL;
-
+
qcam->width = 320;
qcam->height = 240;
qcam->transfer_scale = 4;
-
+
if(vw->width>=160 && vw->height>=120)
{
qcam->transfer_scale = 2;
@@ -808,11 +808,11 @@
mutex_lock(&qcam->lock);
qc_setscanmode(qcam);
mutex_unlock(&qcam->lock);
-
+
/* We must update the camera before we grab. We could
just have changed the grab size */
qcam->status |= QC_PARAM_CHANGE;
-
+
/* Ok we figured out what to use from our wide choice */
return 0;
}
@@ -853,9 +853,9 @@
struct qcam_device *qcam=(struct qcam_device *)v;
int len;
parport_claim_or_block(qcam->pdev);
-
+
mutex_lock(&qcam->lock);
-
+
qc_reset(qcam);
/* Update the camera parameters if we need to */
@@ -863,13 +863,13 @@
qc_set(qcam);
len=qc_capture(qcam, buf,count);
-
+
mutex_unlock(&qcam->lock);
-
+
parport_release(qcam->pdev);
return len;
}
-
+
static struct file_operations qcam_fops = {
.owner = THIS_MODULE,
.open = video_exclusive_open,
@@ -905,11 +905,11 @@
qcam=qcam_init(port);
if(qcam==NULL)
return -ENODEV;
-
+
parport_claim_or_block(qcam->pdev);
qc_reset(qcam);
-
+
if(qc_detect(qcam)==0)
{
parport_release(qcam->pdev);
@@ -920,9 +920,9 @@
qc_calibrate(qcam);
parport_release(qcam->pdev);
-
+
printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
-
+
if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
{
parport_unregister_device(qcam->pdev);
@@ -1013,7 +1013,7 @@
printk("Connectix Quickcam max-poll was above 5000. Using 5000.\n");
maxpoll = 5000;
}
-
+
if (yieldlines < 1) {
printk("Connectix Quickcam yieldlines was less than 1. Using 1.\n");
yieldlines = 1;
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 8211fd8..22a7386 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -16,7 +16,7 @@
*
* The parport parameter controls which parports will be scanned.
* Scanning all parports causes some printers to print a garbage page.
- * -- March 14, 1999 Billy Donahue <billy@escape.com>
+ * -- March 14, 1999 Billy Donahue <billy@escape.com>
*
* Fixed data format to BGR, added force_rgb parameter. Added missing
* parport_unregister_driver() on module removal.
@@ -88,7 +88,7 @@
return (parport_read_data(qcam->pport) & 0x1)?1:0;
}
-static unsigned int qcam_await_ready1(struct qcam_device *qcam,
+static unsigned int qcam_await_ready1(struct qcam_device *qcam,
int value)
{
unsigned long oldjiffies = jiffies;
@@ -98,7 +98,7 @@
if (qcam_ready1(qcam) == value)
return 0;
- /* If the camera didn't respond within 1/25 second, poll slowly
+ /* If the camera didn't respond within 1/25 second, poll slowly
for a while. */
for (i = 0; i < 50; i++)
{
@@ -123,7 +123,7 @@
if (qcam_ready2(qcam) == value)
return 0;
- /* If the camera didn't respond within 1/25 second, poll slowly
+ /* If the camera didn't respond within 1/25 second, poll slowly
for a while. */
for (i = 0; i < 50; i++)
{
@@ -157,12 +157,12 @@
unsigned int idata;
parport_write_data(qcam->pport, data);
idata = qcam_read_data(qcam);
- if (data != idata)
+ if (data != idata)
{
- printk(KERN_WARNING "cqcam: sent %x but received %x\n", data,
+ printk(KERN_WARNING "cqcam: sent %x but received %x\n", data,
idata);
return 1;
- }
+ }
return 0;
}
@@ -193,12 +193,12 @@
no device was found". Fix this one day. */
if (qcam->pport->probe_info[0].class == PARPORT_CLASS_MEDIA
&& qcam->pport->probe_info[0].model
- && !strcmp(qcam->pdev->port->probe_info[0].model,
+ && !strcmp(qcam->pdev->port->probe_info[0].model,
"Color QuickCam 2.0")) {
printk(KERN_DEBUG "QuickCam: Found by IEEE1284 probe.\n");
return 1;
}
-
+
if (probe < 2)
return 0;
@@ -206,11 +206,11 @@
/* look for a heartbeat */
ostat = stat = parport_read_status(qcam->pport);
- for (i=0; i<250; i++)
+ for (i=0; i<250; i++)
{
mdelay(1);
stat = parport_read_status(qcam->pport);
- if (ostat != stat)
+ if (ostat != stat)
{
if (++count >= 3) return 1;
ostat = stat;
@@ -226,11 +226,11 @@
count = 0;
ostat = stat = parport_read_status(qcam->pport);
- for (i=0; i<250; i++)
+ for (i=0; i<250; i++)
{
mdelay(1);
stat = parport_read_status(qcam->pport);
- if (ostat != stat)
+ if (ostat != stat)
{
if (++count >= 3) return 1;
ostat = stat;
@@ -247,7 +247,7 @@
parport_write_control(qcam->pport, 0x8);
mdelay(1);
parport_write_control(qcam->pport, 0xc);
- mdelay(1);
+ mdelay(1);
}
/* Reset the QuickCam and program for brightness, contrast,
@@ -258,7 +258,7 @@
qc_reset(q);
/* Set the brightness. */
- qcam_set(q, 11, q->brightness);
+ qcam_set(q, 11, q->brightness);
/* Set the height and width. These refer to the actual
CCD area *before* applying the selected decimation. */
@@ -272,12 +272,12 @@
/* Set contrast and white balance. */
qcam_set(q, 0x19, q->contrast);
qcam_set(q, 0x1f, q->whitebal);
-
+
/* Set the speed. */
qcam_set(q, 45, 2);
}
-/* Read some bytes from the camera and put them in the buffer.
+/* Read some bytes from the camera and put them in the buffer.
nbytes should be a multiple of 3, because bidirectional mode gives
us three bytes at a time. */
@@ -383,7 +383,7 @@
if (qcam_set(q, 7, (q->mode | (is_bi_dir?1:0)) + 1))
return -EIO;
-
+
lines = q->height;
pixelsperline = q->width;
bitsperxfer = (is_bi_dir) ? 24 : 8;
@@ -499,7 +499,7 @@
{
struct video_device *dev = video_devdata(file);
struct qcam_device *qcam=(struct qcam_device *)dev;
-
+
switch(cmd)
{
case VIDIOCGCAP:
@@ -574,7 +574,7 @@
*/
if (p->depth != 24 || p->palette != VIDEO_PALETTE_RGB24)
return -EINVAL;
-
+
/*
* Now load the camera.
*/
@@ -584,7 +584,7 @@
mutex_lock(&qcam->lock);
parport_claim_or_block(qcam->pdev);
- qc_setup(qcam);
+ qc_setup(qcam);
parport_release(qcam->pdev);
mutex_unlock(&qcam->lock);
return 0;
@@ -601,11 +601,11 @@
return -EINVAL;
if(vw->width<80||vw->width>320)
return -EINVAL;
-
+
qcam->width = 80;
qcam->height = 60;
qcam->mode = QC_DECIMATION_4;
-
+
if(vw->width>=160 && vw->height>=120)
{
qcam->width = 160;
@@ -627,7 +627,7 @@
qcam->mode = QC_BILLIONS | QC_DECIMATION_1;
}
#endif
- /* Ok we figured out what to use from our
+ /* Ok we figured out what to use from our
wide choice */
mutex_lock(&qcam->lock);
parport_claim_or_block(qcam->pdev);
@@ -676,7 +676,7 @@
mutex_lock(&qcam->lock);
parport_claim_or_block(qcam->pdev);
/* Probably should have a semaphore against multiple users */
- len = qc_capture(qcam, buf,count);
+ len = qc_capture(qcam, buf,count);
parport_release(qcam->pdev);
mutex_unlock(&qcam->lock);
return len;
@@ -707,7 +707,7 @@
static struct qcam_device *qcam_init(struct parport *port)
{
struct qcam_device *q;
-
+
q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
if(q==NULL)
return NULL;
@@ -718,14 +718,14 @@
q->bidirectional = (q->pport->modes & PARPORT_MODE_TRISTATE)?1:0;
- if (q->pdev == NULL)
+ if (q->pdev == NULL)
{
printk(KERN_ERR "c-qcam: couldn't register for %s.\n",
port->name);
kfree(q);
return NULL;
}
-
+
memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
mutex_init(&q->lock);
@@ -766,11 +766,11 @@
qcam = qcam_init(port);
if (qcam==NULL)
return -ENODEV;
-
+
parport_claim_or_block(qcam->pdev);
qc_reset(qcam);
-
+
if (probe && qc_detect(qcam)==0)
{
parport_release(qcam->pdev);
@@ -782,7 +782,7 @@
qc_setup(qcam);
parport_release(qcam->pdev);
-
+
if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
{
printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
@@ -792,9 +792,9 @@
return -ENODEV;
}
- printk(KERN_INFO "video%d: Colour QuickCam found on %s\n",
+ printk(KERN_INFO "video%d: Colour QuickCam found on %s\n",
qcam->vdev.minor, qcam->pport->name);
-
+
qcams[num_cams++] = qcam;
return 0;
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 3cebfa9..2227c56 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -24,7 +24,7 @@
*/
/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_ 1 */
+/* #define _CPIA_DEBUG_ 1 */
#include <linux/config.h>
@@ -67,11 +67,11 @@
static unsigned short colorspace_conv = 0;
module_param(colorspace_conv, ushort, 0444);
MODULE_PARM_DESC(colorspace_conv,
- "\n<n> Colorspace conversion:"
- "\n0 = disable"
- "\n1 = enable"
- "\nDefault value is 0"
- "\n");
+ "\n<n> Colorspace conversion:"
+ "\n0 = disable"
+ "\n1 = enable"
+ "\nDefault value is 0"
+ "\n");
#define ABOUT "V4L-Driver for Vision CPiA based cameras"
@@ -189,8 +189,8 @@
#define TC 94
#define EXP_ACC_DARK 50
#define EXP_ACC_LIGHT 90
-#define HIGH_COMP_102 160
-#define MAX_COMP 239
+#define HIGH_COMP_102 160
+#define MAX_COMP 239
#define DARK_TIME 3
#define LIGHT_TIME 3
@@ -208,7 +208,7 @@
static void reset_camera_struct(struct cam_data *cam);
static int find_over_exposure(int brightness);
static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
- int on);
+ int on);
/**********************************************************************
@@ -262,7 +262,7 @@
static struct proc_dir_entry *cpia_proc_root=NULL;
static int cpia_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+ int count, int *eof, void *data)
{
char *out = page;
int len, tmp;
@@ -276,58 +276,58 @@
out += sprintf(out, "V4L Driver version: %d.%d.%d\n",
CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER);
out += sprintf(out, "CPIA Version: %d.%02d (%d.%d)\n",
- cam->params.version.firmwareVersion,
- cam->params.version.firmwareRevision,
- cam->params.version.vcVersion,
- cam->params.version.vcRevision);
+ cam->params.version.firmwareVersion,
+ cam->params.version.firmwareRevision,
+ cam->params.version.vcVersion,
+ cam->params.version.vcRevision);
out += sprintf(out, "CPIA PnP-ID: %04x:%04x:%04x\n",
- cam->params.pnpID.vendor, cam->params.pnpID.product,
- cam->params.pnpID.deviceRevision);
+ cam->params.pnpID.vendor, cam->params.pnpID.product,
+ cam->params.pnpID.deviceRevision);
out += sprintf(out, "VP-Version: %d.%d %04x\n",
- cam->params.vpVersion.vpVersion,
- cam->params.vpVersion.vpRevision,
- cam->params.vpVersion.cameraHeadID);
-
+ cam->params.vpVersion.vpVersion,
+ cam->params.vpVersion.vpRevision,
+ cam->params.vpVersion.cameraHeadID);
+
out += sprintf(out, "system_state: %#04x\n",
- cam->params.status.systemState);
+ cam->params.status.systemState);
out += sprintf(out, "grab_state: %#04x\n",
- cam->params.status.grabState);
+ cam->params.status.grabState);
out += sprintf(out, "stream_state: %#04x\n",
- cam->params.status.streamState);
+ cam->params.status.streamState);
out += sprintf(out, "fatal_error: %#04x\n",
- cam->params.status.fatalError);
+ cam->params.status.fatalError);
out += sprintf(out, "cmd_error: %#04x\n",
- cam->params.status.cmdError);
+ cam->params.status.cmdError);
out += sprintf(out, "debug_flags: %#04x\n",
- cam->params.status.debugFlags);
+ cam->params.status.debugFlags);
out += sprintf(out, "vp_status: %#04x\n",
- cam->params.status.vpStatus);
+ cam->params.status.vpStatus);
out += sprintf(out, "error_code: %#04x\n",
- cam->params.status.errorCode);
+ cam->params.status.errorCode);
/* QX3 specific entries */
if (cam->params.qx3.qx3_detected) {
out += sprintf(out, "button: %4d\n",
- cam->params.qx3.button);
+ cam->params.qx3.button);
out += sprintf(out, "cradled: %4d\n",
- cam->params.qx3.cradled);
+ cam->params.qx3.cradled);
}
out += sprintf(out, "video_size: %s\n",
- cam->params.format.videoSize == VIDEOSIZE_CIF ?
+ cam->params.format.videoSize == VIDEOSIZE_CIF ?
"CIF " : "QCIF");
out += sprintf(out, "roi: (%3d, %3d) to (%3d, %3d)\n",
- cam->params.roi.colStart*8,
- cam->params.roi.rowStart*4,
- cam->params.roi.colEnd*8,
- cam->params.roi.rowEnd*4);
+ cam->params.roi.colStart*8,
+ cam->params.roi.rowStart*4,
+ cam->params.roi.colEnd*8,
+ cam->params.roi.rowEnd*4);
out += sprintf(out, "actual_fps: %3d\n", cam->fps);
out += sprintf(out, "transfer_rate: %4dkB/s\n",
- cam->transfer_rate);
-
+ cam->transfer_rate);
+
out += sprintf(out, "\nread-write\n");
out += sprintf(out, "----------------------- current min"
- " max default comment\n");
+ " max default comment\n");
out += sprintf(out, "brightness: %8d %8d %8d %8d\n",
- cam->params.colourParams.brightness, 0, 100, 50);
+ cam->params.colourParams.brightness, 0, 100, 50);
if (cam->params.version.firmwareVersion == 1 &&
cam->params.version.firmwareRevision == 2)
/* 1-02 firmware limits contrast to 80 */
@@ -336,26 +336,26 @@
tmp = 96;
out += sprintf(out, "contrast: %8d %8d %8d %8d"
- " steps of 8\n",
- cam->params.colourParams.contrast, 0, tmp, 48);
+ " steps of 8\n",
+ cam->params.colourParams.contrast, 0, tmp, 48);
out += sprintf(out, "saturation: %8d %8d %8d %8d\n",
- cam->params.colourParams.saturation, 0, 100, 50);
+ cam->params.colourParams.saturation, 0, 100, 50);
tmp = (25000+5000*cam->params.sensorFps.baserate)/
(1<<cam->params.sensorFps.divisor);
out += sprintf(out, "sensor_fps: %4d.%03d %8d %8d %8d\n",
- tmp/1000, tmp%1000, 3, 30, 15);
+ tmp/1000, tmp%1000, 3, 30, 15);
out += sprintf(out, "stream_start_line: %8d %8d %8d %8d\n",
- 2*cam->params.streamStartLine, 0,
+ 2*cam->params.streamStartLine, 0,
cam->params.format.videoSize == VIDEOSIZE_CIF ? 288:144,
cam->params.format.videoSize == VIDEOSIZE_CIF ? 240:120);
out += sprintf(out, "sub_sample: %8s %8s %8s %8s\n",
- cam->params.format.subSample == SUBSAMPLE_420 ?
+ cam->params.format.subSample == SUBSAMPLE_420 ?
"420" : "422", "420", "422", "422");
out += sprintf(out, "yuv_order: %8s %8s %8s %8s\n",
- cam->params.format.yuvOrder == YUVORDER_YUYV ?
+ cam->params.format.yuvOrder == YUVORDER_YUYV ?
"YUYV" : "UYVY", "YUYV" , "UYVY", "YUYV");
out += sprintf(out, "ecp_timing: %8s %8s %8s %8s\n",
- cam->params.ecpTiming ? "slow" : "normal", "slow",
+ cam->params.ecpTiming ? "slow" : "normal", "slow",
"normal", "normal");
if (cam->params.colourBalance.balanceMode == 2) {
@@ -366,11 +366,11 @@
out += sprintf(out, "color_balance_mode: %8s %8s %8s"
" %8s\n", tmpstr, "manual", "auto", "auto");
out += sprintf(out, "red_gain: %8d %8d %8d %8d\n",
- cam->params.colourBalance.redGain, 0, 212, 32);
+ cam->params.colourBalance.redGain, 0, 212, 32);
out += sprintf(out, "green_gain: %8d %8d %8d %8d\n",
- cam->params.colourBalance.greenGain, 0, 212, 6);
+ cam->params.colourBalance.greenGain, 0, 212, 6);
out += sprintf(out, "blue_gain: %8d %8d %8d %8d\n",
- cam->params.colourBalance.blueGain, 0, 212, 92);
+ cam->params.colourBalance.blueGain, 0, 212, 92);
if (cam->params.version.firmwareVersion == 1 &&
cam->params.version.firmwareRevision == 2)
@@ -381,11 +381,11 @@
if (cam->params.exposure.gainMode == 0)
out += sprintf(out, "max_gain: unknown %28s"
- " powers of 2\n", tmpstr);
+ " powers of 2\n", tmpstr);
else
out += sprintf(out, "max_gain: %8d %28s"
" 1,2,4 or 8 \n",
- 1<<(cam->params.exposure.gainMode-1), tmpstr);
+ 1<<(cam->params.exposure.gainMode-1), tmpstr);
switch(cam->params.exposure.expMode) {
case 1:
@@ -402,10 +402,10 @@
out += sprintf(out, "exposure_mode: %8s %8s %8s"
" %8s\n", tmpstr, "manual", "auto", "auto");
out += sprintf(out, "centre_weight: %8s %8s %8s %8s\n",
- (2-cam->params.exposure.centreWeight) ? "on" : "off",
- "off", "on", "on");
+ (2-cam->params.exposure.centreWeight) ? "on" : "off",
+ "off", "on", "on");
out += sprintf(out, "gain: %8d %8d max_gain %8d 1,2,4,8 possible\n",
- 1<<cam->params.exposure.gain, 1, 1);
+ 1<<cam->params.exposure.gain, 1, 1);
if (cam->params.version.firmwareVersion == 1 &&
cam->params.version.firmwareRevision == 2)
/* 1-02 firmware limits fineExp/2 to 127 */
@@ -414,7 +414,7 @@
tmp = 510;
out += sprintf(out, "fine_exp: %8d %8d %8d %8d\n",
- cam->params.exposure.fineExp*2, 0, tmp, 0);
+ cam->params.exposure.fineExp*2, 0, tmp, 0);
if (cam->params.version.firmwareVersion == 1 &&
cam->params.version.firmwareRevision == 2)
/* 1-02 firmware limits coarseExpHi to 0 */
@@ -426,46 +426,46 @@
" %8d\n", cam->params.exposure.coarseExpLo+
256*cam->params.exposure.coarseExpHi, 0, tmp, 185);
out += sprintf(out, "red_comp: %8d %8d %8d %8d\n",
- cam->params.exposure.redComp, COMP_RED, 255, COMP_RED);
+ cam->params.exposure.redComp, COMP_RED, 255, COMP_RED);
out += sprintf(out, "green1_comp: %8d %8d %8d %8d\n",
- cam->params.exposure.green1Comp, COMP_GREEN1, 255,
+ cam->params.exposure.green1Comp, COMP_GREEN1, 255,
COMP_GREEN1);
out += sprintf(out, "green2_comp: %8d %8d %8d %8d\n",
- cam->params.exposure.green2Comp, COMP_GREEN2, 255,
+ cam->params.exposure.green2Comp, COMP_GREEN2, 255,
COMP_GREEN2);
out += sprintf(out, "blue_comp: %8d %8d %8d %8d\n",
- cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE);
-
+ cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE);
+
out += sprintf(out, "apcor_gain1: %#8x %#8x %#8x %#8x\n",
- cam->params.apcor.gain1, 0, 0xff, 0x1c);
+ cam->params.apcor.gain1, 0, 0xff, 0x1c);
out += sprintf(out, "apcor_gain2: %#8x %#8x %#8x %#8x\n",
- cam->params.apcor.gain2, 0, 0xff, 0x1a);
+ cam->params.apcor.gain2, 0, 0xff, 0x1a);
out += sprintf(out, "apcor_gain4: %#8x %#8x %#8x %#8x\n",
- cam->params.apcor.gain4, 0, 0xff, 0x2d);
+ cam->params.apcor.gain4, 0, 0xff, 0x2d);
out += sprintf(out, "apcor_gain8: %#8x %#8x %#8x %#8x\n",
- cam->params.apcor.gain8, 0, 0xff, 0x2a);
+ cam->params.apcor.gain8, 0, 0xff, 0x2a);
out += sprintf(out, "vl_offset_gain1: %8d %8d %8d %8d\n",
- cam->params.vlOffset.gain1, 0, 255, 24);
+ cam->params.vlOffset.gain1, 0, 255, 24);
out += sprintf(out, "vl_offset_gain2: %8d %8d %8d %8d\n",
- cam->params.vlOffset.gain2, 0, 255, 28);
+ cam->params.vlOffset.gain2, 0, 255, 28);
out += sprintf(out, "vl_offset_gain4: %8d %8d %8d %8d\n",
- cam->params.vlOffset.gain4, 0, 255, 30);
+ cam->params.vlOffset.gain4, 0, 255, 30);
out += sprintf(out, "vl_offset_gain8: %8d %8d %8d %8d\n",
- cam->params.vlOffset.gain8, 0, 255, 30);
+ cam->params.vlOffset.gain8, 0, 255, 30);
out += sprintf(out, "flicker_control: %8s %8s %8s %8s\n",
- cam->params.flickerControl.flickerMode ? "on" : "off",
+ cam->params.flickerControl.flickerMode ? "on" : "off",
"off", "on", "off");
out += sprintf(out, "mains_frequency: %8d %8d %8d %8d"
- " only 50/60\n",
- cam->mainsFreq ? 60 : 50, 50, 60, 50);
+ " only 50/60\n",
+ cam->mainsFreq ? 60 : 50, 50, 60, 50);
if(cam->params.flickerControl.allowableOverExposure < 0)
out += sprintf(out, "allowable_overexposure: %4dauto auto %8d auto\n",
- -cam->params.flickerControl.allowableOverExposure,
- 255);
+ -cam->params.flickerControl.allowableOverExposure,
+ 255);
else
out += sprintf(out, "allowable_overexposure: %8d auto %8d auto\n",
- cam->params.flickerControl.allowableOverExposure,
- 255);
+ cam->params.flickerControl.allowableOverExposure,
+ 255);
out += sprintf(out, "compression_mode: ");
switch(cam->params.compression.mode) {
case CPIA_COMPRESSION_NONE:
@@ -483,52 +483,52 @@
}
out += sprintf(out, " none,auto,manual auto\n");
out += sprintf(out, "decimation_enable: %8s %8s %8s %8s\n",
- cam->params.compression.decimation ==
- DECIMATION_ENAB ? "on":"off", "off", "on",
+ cam->params.compression.decimation ==
+ DECIMATION_ENAB ? "on":"off", "off", "on",
"off");
out += sprintf(out, "compression_target: %9s %9s %9s %9s\n",
- cam->params.compressionTarget.frTargeting ==
+ cam->params.compressionTarget.frTargeting ==
CPIA_COMPRESSION_TARGET_FRAMERATE ?
"framerate":"quality",
"framerate", "quality", "quality");
out += sprintf(out, "target_framerate: %8d %8d %8d %8d\n",
- cam->params.compressionTarget.targetFR, 1, 30, 15);
+ cam->params.compressionTarget.targetFR, 1, 30, 15);
out += sprintf(out, "target_quality: %8d %8d %8d %8d\n",
- cam->params.compressionTarget.targetQ, 1, 64, 5);
+ cam->params.compressionTarget.targetQ, 1, 64, 5);
out += sprintf(out, "y_threshold: %8d %8d %8d %8d\n",
- cam->params.yuvThreshold.yThreshold, 0, 31, 6);
+ cam->params.yuvThreshold.yThreshold, 0, 31, 6);
out += sprintf(out, "uv_threshold: %8d %8d %8d %8d\n",
- cam->params.yuvThreshold.uvThreshold, 0, 31, 6);
+ cam->params.yuvThreshold.uvThreshold, 0, 31, 6);
out += sprintf(out, "hysteresis: %8d %8d %8d %8d\n",
- cam->params.compressionParams.hysteresis, 0, 255, 3);
+ cam->params.compressionParams.hysteresis, 0, 255, 3);
out += sprintf(out, "threshold_max: %8d %8d %8d %8d\n",
- cam->params.compressionParams.threshMax, 0, 255, 11);
+ cam->params.compressionParams.threshMax, 0, 255, 11);
out += sprintf(out, "small_step: %8d %8d %8d %8d\n",
- cam->params.compressionParams.smallStep, 0, 255, 1);
+ cam->params.compressionParams.smallStep, 0, 255, 1);
out += sprintf(out, "large_step: %8d %8d %8d %8d\n",
- cam->params.compressionParams.largeStep, 0, 255, 3);
+ cam->params.compressionParams.largeStep, 0, 255, 3);
out += sprintf(out, "decimation_hysteresis: %8d %8d %8d %8d\n",
- cam->params.compressionParams.decimationHysteresis,
+ cam->params.compressionParams.decimationHysteresis,
0, 255, 2);
out += sprintf(out, "fr_diff_step_thresh: %8d %8d %8d %8d\n",
- cam->params.compressionParams.frDiffStepThresh,
+ cam->params.compressionParams.frDiffStepThresh,
0, 255, 5);
out += sprintf(out, "q_diff_step_thresh: %8d %8d %8d %8d\n",
- cam->params.compressionParams.qDiffStepThresh,
+ cam->params.compressionParams.qDiffStepThresh,
0, 255, 3);
out += sprintf(out, "decimation_thresh_mod: %8d %8d %8d %8d\n",
- cam->params.compressionParams.decimationThreshMod,
+ cam->params.compressionParams.decimationThreshMod,
0, 255, 2);
/* QX3 specific entries */
if (cam->params.qx3.qx3_detected) {
- out += sprintf(out, "toplight: %8s %8s %8s %8s\n",
- cam->params.qx3.toplight ? "on" : "off",
+ out += sprintf(out, "toplight: %8s %8s %8s %8s\n",
+ cam->params.qx3.toplight ? "on" : "off",
"off", "on", "off");
- out += sprintf(out, "bottomlight: %8s %8s %8s %8s\n",
- cam->params.qx3.bottomlight ? "on" : "off",
+ out += sprintf(out, "bottomlight: %8s %8s %8s %8s\n",
+ cam->params.qx3.bottomlight ? "on" : "off",
"off", "on", "off");
}
-
+
len = out - page;
len -= off;
if (len < count) {
@@ -543,7 +543,7 @@
static int match(char *checkstr, char **buffer, unsigned long *count,
- int *find_colon, int *err)
+ int *find_colon, int *err)
{
int ret, colon_found = 1;
int len = strlen(checkstr);
@@ -583,7 +583,7 @@
}
static int cpia_write_proc(struct file *file, const char __user *buf,
- unsigned long count, void *data)
+ unsigned long count, void *data)
{
struct cam_data *cam = data;
struct cam_params new_params;
@@ -619,12 +619,12 @@
retval = -EINVAL;
goto out;
}
-
+
buffer = page;
-
+
if (mutex_lock_interruptible(&cam->param_lock))
return -ERESTARTSYS;
-
+
/*
* Skip over leading whitespace
*/
@@ -632,15 +632,15 @@
--count;
++buffer;
}
-
+
memcpy(&new_params, &cam->params, sizeof(struct cam_params));
new_mains = cam->mainsFreq;
-
+
#define MATCH(x) (match(x, &buffer, &count, &find_colon, &retval))
#define VALUE (value(&buffer,&count, &retval))
#define FIRMWARE_VERSION(x,y) (new_params.version.firmwareVersion == (x) && \
- new_params.version.firmwareRevision == (y))
-
+ new_params.version.firmwareRevision == (y))
+
retval = 0;
while (count && !retval) {
find_colon = 1;
@@ -656,7 +656,7 @@
}
command_flags |= COMMAND_SETCOLOURPARAMS;
if(new_params.flickerControl.allowableOverExposure < 0)
- new_params.flickerControl.allowableOverExposure =
+ new_params.flickerControl.allowableOverExposure =
-find_over_exposure(new_params.colourParams.brightness);
if(new_params.flickerControl.flickerMode != 0)
command_flags |= COMMAND_SETFLICKERCTRL;
@@ -721,7 +721,7 @@
/* Either base rate would work here */
new_params.sensorFps.baserate = 1;
}
- new_params.flickerControl.coarseJump =
+ new_params.flickerControl.coarseJump =
flicker_jumps[new_mains]
[new_params.sensorFps.baserate]
[new_params.sensorFps.divisor];
@@ -1085,7 +1085,7 @@
} else if (MATCH("mains_frequency")) {
if (!retval && MATCH("50")) {
new_mains = 0;
- new_params.flickerControl.coarseJump =
+ new_params.flickerControl.coarseJump =
flicker_jumps[new_mains]
[new_params.sensorFps.baserate]
[new_params.sensorFps.divisor];
@@ -1093,7 +1093,7 @@
command_flags |= COMMAND_SETFLICKERCTRL;
} else if (!retval && MATCH("60")) {
new_mains = 1;
- new_params.flickerControl.coarseJump =
+ new_params.flickerControl.coarseJump =
flicker_jumps[new_mains]
[new_params.sensorFps.baserate]
[new_params.sensorFps.divisor];
@@ -1103,7 +1103,7 @@
retval = -EINVAL;
} else if (MATCH("allowable_overexposure")) {
if (!retval && MATCH("auto")) {
- new_params.flickerControl.allowableOverExposure =
+ new_params.flickerControl.allowableOverExposure =
-find_over_exposure(new_params.colourParams.brightness);
if(new_params.flickerControl.flickerMode != 0)
command_flags |= COMMAND_SETFLICKERCTRL;
@@ -1146,10 +1146,10 @@
command_flags |= COMMAND_SETCOMPRESSION;
} else if (MATCH("compression_target")) {
if (!retval && MATCH("quality"))
- new_params.compressionTarget.frTargeting =
+ new_params.compressionTarget.frTargeting =
CPIA_COMPRESSION_TARGET_QUALITY;
else if (!retval && MATCH("framerate"))
- new_params.compressionTarget.frTargeting =
+ new_params.compressionTarget.frTargeting =
CPIA_COMPRESSION_TARGET_FRAMERATE;
else
retval = -EINVAL;
@@ -1173,7 +1173,7 @@
if (!retval) {
if(val > 0 && val <= 64)
new_params.compressionTarget.targetQ = val;
- else
+ else
retval = -EINVAL;
}
command_flags |= COMMAND_SETCOMPRESSIONTARGET;
@@ -1288,19 +1288,19 @@
}
command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
} else if (MATCH("toplight")) {
- if (!retval && MATCH("on"))
+ if (!retval && MATCH("on"))
new_params.qx3.toplight = 1;
else if (!retval && MATCH("off"))
new_params.qx3.toplight = 0;
- else
+ else
retval = -EINVAL;
command_flags |= COMMAND_SETLIGHTS;
} else if (MATCH("bottomlight")) {
- if (!retval && MATCH("on"))
+ if (!retval && MATCH("on"))
new_params.qx3.bottomlight = 1;
- else if (!retval && MATCH("off"))
+ else if (!retval && MATCH("off"))
new_params.qx3.bottomlight = 0;
- else
+ else
retval = -EINVAL;
command_flags |= COMMAND_SETLIGHTS;
} else {
@@ -1326,7 +1326,7 @@
}
}
}
-#undef MATCH
+#undef MATCH
#undef VALUE
#undef FIRMWARE_VERSION
if (!retval) {
@@ -1349,24 +1349,24 @@
retval = size;
} else
DBG("error: %d\n", retval);
-
+
mutex_unlock(&cam->param_lock);
-
+
out:
free_page((unsigned long)page);
- return retval;
+ return retval;
}
static void create_proc_cpia_cam(struct cam_data *cam)
{
char name[7];
struct proc_dir_entry *ent;
-
+
if (!cpia_proc_root || !cam)
return;
sprintf(name, "video%d", cam->vdev.minor);
-
+
ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root);
if (!ent)
return;
@@ -1374,9 +1374,9 @@
ent->data = cam;
ent->read_proc = cpia_read_proc;
ent->write_proc = cpia_write_proc;
- /*
+ /*
size of the proc entry is 3736 bytes for the standard webcam;
- the extra features of the QX3 microscope add 189 bytes.
+ the extra features of the QX3 microscope add 189 bytes.
(we have not yet probed the camera to see which type it is).
*/
ent->size = 3736 + 189;
@@ -1386,10 +1386,10 @@
static void destroy_proc_cpia_cam(struct cam_data *cam)
{
char name[7];
-
+
if (!cam || !cam->proc_entry)
return;
-
+
sprintf(name, "video%d", cam->vdev.minor);
remove_proc_entry(name, cpia_proc_root);
cam->proc_entry = NULL;
@@ -1596,13 +1596,13 @@
cam->vc.width = cam->vw.width;
if(cam->vc.height == 0)
cam->vc.height = cam->vw.height;
-
+
cam->params.roi.colStart += cam->vc.x >> 3;
cam->params.roi.colEnd = cam->params.roi.colStart +
- (cam->vc.width >> 3);
+ (cam->vc.width >> 3);
cam->params.roi.rowStart += cam->vc.y >> 2;
cam->params.roi.rowEnd = cam->params.roi.rowStart +
- (cam->vc.height >> 2);
+ (cam->vc.height >> 2);
return;
}
@@ -1624,7 +1624,7 @@
static int free_frame_buf(struct cam_data *cam)
{
int i;
-
+
rvfree(cam->frame_buf, FRAME_NUM*CPIA_MAX_FRAME_SIZE);
cam->frame_buf = NULL;
for (i=0; i < FRAME_NUM; i++)
@@ -1667,7 +1667,7 @@
mutex_lock(&cam->param_lock);
datasize=8;
break;
- case CPIA_COMMAND_ReadMCPorts:
+ case CPIA_COMMAND_ReadMCPorts:
case CPIA_COMMAND_ReadVCRegs:
datasize = 4;
break;
@@ -1746,10 +1746,10 @@
mutex_unlock(&cam->param_lock);
break;
- case CPIA_COMMAND_ReadMCPorts:
- if (!cam->params.qx3.qx3_detected)
+ case CPIA_COMMAND_ReadMCPorts:
+ if (!cam->params.qx3.qx3_detected)
break;
- /* test button press */
+ /* test button press */
cam->params.qx3.button = ((data[1] & 0x02) == 0);
if (cam->params.qx3.button) {
/* button pressed - unlock the latch */
@@ -1770,9 +1770,9 @@
/* send a command to the camera with an additional data transaction */
static int do_command_extended(struct cam_data *cam, u16 command,
- u8 a, u8 b, u8 c, u8 d,
- u8 e, u8 f, u8 g, u8 h,
- u8 i, u8 j, u8 k, u8 l)
+ u8 a, u8 b, u8 c, u8 d,
+ u8 e, u8 f, u8 g, u8 h,
+ u8 i, u8 j, u8 k, u8 l)
{
int retval;
u8 cmd[8], data[8];
@@ -1809,10 +1809,10 @@
#define LIMIT(x) ((((x)>0xffffff)?0xff0000:(((x)<=0xffff)?0:(x)&0xff0000))>>16)
static int convert420(unsigned char *yuv, unsigned char *rgb, int out_fmt,
- int linesize, int mmap_kludge)
+ int linesize, int mmap_kludge)
{
int y, u, v, r, g, b, y1;
-
+
/* Odd lines use the same u and v as the previous line.
* Because of compression, it is necessary to get this
* information from the decoded image. */
@@ -1925,7 +1925,7 @@
static int yuvconvert(unsigned char *yuv, unsigned char *rgb, int out_fmt,
- int in_uyvy, int mmap_kludge)
+ int in_uyvy, int mmap_kludge)
{
int y, u, v, r, g, b, y1;
@@ -2078,21 +2078,21 @@
mutex_unlock(&cam->param_lock);
return -1;
}
-
+
if (ibuf[17] != SUBSAMPLE_420 && ibuf[17] != SUBSAMPLE_422) {
LOG("illegal subtype %d\n",ibuf[17]);
mutex_unlock(&cam->param_lock);
return -1;
}
subsample_422 = ibuf[17] == SUBSAMPLE_422;
-
+
if (ibuf[18] != YUVORDER_YUYV && ibuf[18] != YUVORDER_UYVY) {
LOG("illegal yuvorder %d\n",ibuf[18]);
mutex_unlock(&cam->param_lock);
return -1;
}
in_uyvy = ibuf[18] == YUVORDER_UYVY;
-
+
if ((ibuf[24] != cam->params.roi.colStart) ||
(ibuf[25] != cam->params.roi.colEnd) ||
(ibuf[26] != cam->params.roi.rowStart) ||
@@ -2104,20 +2104,20 @@
cols = 8*(ibuf[25] - ibuf[24]);
rows = 4*(ibuf[27] - ibuf[26]);
-
+
if ((ibuf[28] != NOT_COMPRESSED) && (ibuf[28] != COMPRESSED)) {
LOG("illegal compression %d\n",ibuf[28]);
mutex_unlock(&cam->param_lock);
return -1;
}
compressed = (ibuf[28] == COMPRESSED);
-
+
if (ibuf[29] != NO_DECIMATION && ibuf[29] != DECIMATION_ENAB) {
LOG("illegal decimation %d\n",ibuf[29]);
mutex_unlock(&cam->param_lock);
return -1;
}
- decimation = (ibuf[29] == DECIMATION_ENAB);
+ decimation = (ibuf[29] == DECIMATION_ENAB);
cam->params.yuvThreshold.yThreshold = ibuf[30];
cam->params.yuvThreshold.uvThreshold = ibuf[31];
@@ -2131,7 +2131,7 @@
cam->params.status.errorCode = ibuf[39];
cam->fps = ibuf[41];
mutex_unlock(&cam->param_lock);
-
+
linesize = skipcount(cols, out_fmt);
ibuf += FRAME_HEADER_SIZE;
size -= FRAME_HEADER_SIZE;
@@ -2150,14 +2150,14 @@
if (!compressed || (compressed && !(*ibuf & 1))) {
if(subsample_422 || even_line) {
obuf += yuvconvert(ibuf, obuf, out_fmt,
- in_uyvy, cam->mmap_kludge);
+ in_uyvy, cam->mmap_kludge);
ibuf += 4;
ll -= 4;
} else {
/* SUBSAMPLE_420 on an odd line */
obuf += convert420(ibuf, obuf,
- out_fmt, linesize,
- cam->mmap_kludge);
+ out_fmt, linesize,
+ cam->mmap_kludge);
ibuf += 2;
ll -= 2;
}
@@ -2183,7 +2183,7 @@
if ((size > 3) && (ibuf[0] == EOI) && (ibuf[1] == EOI) &&
(ibuf[2] == EOI) && (ibuf[3] == EOI)) {
- size -= 4;
+ size -= 4;
break;
}
@@ -2204,7 +2204,7 @@
return -1;
}
}
-
+
if(decimation) {
/* interpolate odd rows */
int i, j;
@@ -2233,7 +2233,7 @@
static inline int init_stream_cap(struct cam_data *cam)
{
return do_command(cam, CPIA_COMMAND_InitStreamCap,
- 0, cam->params.streamStartLine, 0, 0);
+ 0, cam->params.streamStartLine, 0, 0);
}
@@ -2254,7 +2254,7 @@
int MaxAllowableOverExposure, OverExposure;
MaxAllowableOverExposure = FLICKER_MAX_EXPOSURE - brightness -
- FLICKER_BRIGHTNESS_CONSTANT;
+ FLICKER_BRIGHTNESS_CONSTANT;
if (MaxAllowableOverExposure < FLICKER_ALLOWABLE_OVER_EXPOSURE) {
OverExposure = MaxAllowableOverExposure;
@@ -2280,62 +2280,62 @@
DEB_BYTE(cam->cmd_queue>>8);
if (cam->cmd_queue & COMMAND_SETFORMAT) {
do_command(cam, CPIA_COMMAND_SetFormat,
- cam->params.format.videoSize,
- cam->params.format.subSample,
- cam->params.format.yuvOrder, 0);
+ cam->params.format.videoSize,
+ cam->params.format.subSample,
+ cam->params.format.yuvOrder, 0);
do_command(cam, CPIA_COMMAND_SetROI,
- cam->params.roi.colStart, cam->params.roi.colEnd,
- cam->params.roi.rowStart, cam->params.roi.rowEnd);
+ cam->params.roi.colStart, cam->params.roi.colEnd,
+ cam->params.roi.rowStart, cam->params.roi.rowEnd);
cam->first_frame = 1;
}
if (cam->cmd_queue & COMMAND_SETCOLOURPARAMS)
do_command(cam, CPIA_COMMAND_SetColourParams,
- cam->params.colourParams.brightness,
- cam->params.colourParams.contrast,
- cam->params.colourParams.saturation, 0);
+ cam->params.colourParams.brightness,
+ cam->params.colourParams.contrast,
+ cam->params.colourParams.saturation, 0);
if (cam->cmd_queue & COMMAND_SETAPCOR)
do_command(cam, CPIA_COMMAND_SetApcor,
- cam->params.apcor.gain1,
- cam->params.apcor.gain2,
- cam->params.apcor.gain4,
- cam->params.apcor.gain8);
+ cam->params.apcor.gain1,
+ cam->params.apcor.gain2,
+ cam->params.apcor.gain4,
+ cam->params.apcor.gain8);
if (cam->cmd_queue & COMMAND_SETVLOFFSET)
do_command(cam, CPIA_COMMAND_SetVLOffset,
- cam->params.vlOffset.gain1,
- cam->params.vlOffset.gain2,
- cam->params.vlOffset.gain4,
- cam->params.vlOffset.gain8);
+ cam->params.vlOffset.gain1,
+ cam->params.vlOffset.gain2,
+ cam->params.vlOffset.gain4,
+ cam->params.vlOffset.gain8);
if (cam->cmd_queue & COMMAND_SETEXPOSURE) {
do_command_extended(cam, CPIA_COMMAND_SetExposure,
- cam->params.exposure.gainMode,
- 1,
- cam->params.exposure.compMode,
- cam->params.exposure.centreWeight,
- cam->params.exposure.gain,
- cam->params.exposure.fineExp,
- cam->params.exposure.coarseExpLo,
- cam->params.exposure.coarseExpHi,
- cam->params.exposure.redComp,
- cam->params.exposure.green1Comp,
- cam->params.exposure.green2Comp,
- cam->params.exposure.blueComp);
+ cam->params.exposure.gainMode,
+ 1,
+ cam->params.exposure.compMode,
+ cam->params.exposure.centreWeight,
+ cam->params.exposure.gain,
+ cam->params.exposure.fineExp,
+ cam->params.exposure.coarseExpLo,
+ cam->params.exposure.coarseExpHi,
+ cam->params.exposure.redComp,
+ cam->params.exposure.green1Comp,
+ cam->params.exposure.green2Comp,
+ cam->params.exposure.blueComp);
if(cam->params.exposure.expMode != 1) {
do_command_extended(cam, CPIA_COMMAND_SetExposure,
- 0,
- cam->params.exposure.expMode,
- 0, 0,
- cam->params.exposure.gain,
- cam->params.exposure.fineExp,
- cam->params.exposure.coarseExpLo,
- cam->params.exposure.coarseExpHi,
- 0, 0, 0, 0);
+ 0,
+ cam->params.exposure.expMode,
+ 0, 0,
+ cam->params.exposure.gain,
+ cam->params.exposure.fineExp,
+ cam->params.exposure.coarseExpLo,
+ cam->params.exposure.coarseExpHi,
+ 0, 0, 0, 0);
}
}
-
+
if (cam->cmd_queue & COMMAND_SETCOLOURBALANCE) {
if (cam->params.colourBalance.balanceMode == 1) {
do_command(cam, CPIA_COMMAND_SetColourBalance,
@@ -2358,47 +2358,47 @@
if (cam->cmd_queue & COMMAND_SETCOMPRESSIONTARGET)
do_command(cam, CPIA_COMMAND_SetCompressionTarget,
- cam->params.compressionTarget.frTargeting,
- cam->params.compressionTarget.targetFR,
- cam->params.compressionTarget.targetQ, 0);
+ cam->params.compressionTarget.frTargeting,
+ cam->params.compressionTarget.targetFR,
+ cam->params.compressionTarget.targetQ, 0);
if (cam->cmd_queue & COMMAND_SETYUVTHRESH)
do_command(cam, CPIA_COMMAND_SetYUVThresh,
- cam->params.yuvThreshold.yThreshold,
- cam->params.yuvThreshold.uvThreshold, 0, 0);
+ cam->params.yuvThreshold.yThreshold,
+ cam->params.yuvThreshold.uvThreshold, 0, 0);
if (cam->cmd_queue & COMMAND_SETCOMPRESSIONPARAMS)
do_command_extended(cam, CPIA_COMMAND_SetCompressionParams,
- 0, 0, 0, 0,
- cam->params.compressionParams.hysteresis,
- cam->params.compressionParams.threshMax,
- cam->params.compressionParams.smallStep,
- cam->params.compressionParams.largeStep,
- cam->params.compressionParams.decimationHysteresis,
- cam->params.compressionParams.frDiffStepThresh,
- cam->params.compressionParams.qDiffStepThresh,
- cam->params.compressionParams.decimationThreshMod);
+ 0, 0, 0, 0,
+ cam->params.compressionParams.hysteresis,
+ cam->params.compressionParams.threshMax,
+ cam->params.compressionParams.smallStep,
+ cam->params.compressionParams.largeStep,
+ cam->params.compressionParams.decimationHysteresis,
+ cam->params.compressionParams.frDiffStepThresh,
+ cam->params.compressionParams.qDiffStepThresh,
+ cam->params.compressionParams.decimationThreshMod);
if (cam->cmd_queue & COMMAND_SETCOMPRESSION)
do_command(cam, CPIA_COMMAND_SetCompression,
- cam->params.compression.mode,
+ cam->params.compression.mode,
cam->params.compression.decimation, 0, 0);
if (cam->cmd_queue & COMMAND_SETSENSORFPS)
do_command(cam, CPIA_COMMAND_SetSensorFPS,
- cam->params.sensorFps.divisor,
- cam->params.sensorFps.baserate, 0, 0);
+ cam->params.sensorFps.divisor,
+ cam->params.sensorFps.baserate, 0, 0);
if (cam->cmd_queue & COMMAND_SETFLICKERCTRL)
do_command(cam, CPIA_COMMAND_SetFlickerCtrl,
- cam->params.flickerControl.flickerMode,
- cam->params.flickerControl.coarseJump,
- abs(cam->params.flickerControl.allowableOverExposure),
- 0);
+ cam->params.flickerControl.flickerMode,
+ cam->params.flickerControl.coarseJump,
+ abs(cam->params.flickerControl.allowableOverExposure),
+ 0);
if (cam->cmd_queue & COMMAND_SETECPTIMING)
do_command(cam, CPIA_COMMAND_SetECPTiming,
- cam->params.ecpTiming, 0, 0, 0);
+ cam->params.ecpTiming, 0, 0, 0);
if (cam->cmd_queue & COMMAND_PAUSE)
do_command(cam, CPIA_COMMAND_EndStreamCap, 0, 0, 0, 0);
@@ -2409,9 +2409,9 @@
if (cam->cmd_queue & COMMAND_SETLIGHTS && cam->params.qx3.qx3_detected)
{
int p1 = (cam->params.qx3.bottomlight == 0) << 1;
- int p2 = (cam->params.qx3.toplight == 0) << 3;
- do_command(cam, CPIA_COMMAND_WriteVCReg, 0x90, 0x8F, 0x50, 0);
- do_command(cam, CPIA_COMMAND_WriteMCPort, 2, 0, (p1|p2|0xE0), 0);
+ int p2 = (cam->params.qx3.toplight == 0) << 3;
+ do_command(cam, CPIA_COMMAND_WriteVCReg, 0x90, 0x8F, 0x50, 0);
+ do_command(cam, CPIA_COMMAND_WriteMCPort, 2, 0, (p1|p2|0xE0), 0);
}
cam->cmd_queue = COMMAND_NONE;
@@ -2422,11 +2422,11 @@
static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
- int on)
+ int on)
{
/* Everything in here is from the Windows driver */
#define FIRMWARE_VERSION(x,y) (params->version.firmwareVersion == (x) && \
- params->version.firmwareRevision == (y))
+ params->version.firmwareRevision == (y))
/* define for compgain calculation */
#if 0
#define COMPGAIN(base, curexp, newexp) \
@@ -2441,7 +2441,7 @@
(u16)(((u32)(curexp * (u8)(curcomp + 128)) / (u8)(basecomp - 128)))
#endif
-
+
int currentexp = params->exposure.coarseExpLo +
params->exposure.coarseExpHi*256;
int startexp;
@@ -2482,7 +2482,7 @@
}
if(FIRMWARE_VERSION(1,2))
params->exposure.compMode = 0;
- else
+ else
params->exposure.compMode = 1;
params->apcor.gain1 = 0x18;
@@ -2533,14 +2533,14 @@
}
#define FIRMWARE_VERSION(x,y) (cam->params.version.firmwareVersion == (x) && \
- cam->params.version.firmwareRevision == (y))
+ cam->params.version.firmwareRevision == (y))
/* monitor the exposure and adjust the sensor frame rate if needed */
static void monitor_exposure(struct cam_data *cam)
{
u8 exp_acc, bcomp, gain, coarseL, cmd[8], data[8];
int retval, light_exp, dark_exp, very_dark_exp;
int old_exposure, new_exposure, framerate;
-
+
/* get necessary stats and register settings from camera */
/* do_command can't handle this, so do it ourselves */
cmd[0] = CPIA_COMMAND_ReadVPRegs>>8;
@@ -2564,17 +2564,17 @@
mutex_lock(&cam->param_lock);
light_exp = cam->params.colourParams.brightness +
- TC - 50 + EXP_ACC_LIGHT;
+ TC - 50 + EXP_ACC_LIGHT;
if(light_exp > 255)
light_exp = 255;
dark_exp = cam->params.colourParams.brightness +
- TC - 50 - EXP_ACC_DARK;
+ TC - 50 - EXP_ACC_DARK;
if(dark_exp < 0)
dark_exp = 0;
very_dark_exp = dark_exp/2;
-
+
old_exposure = cam->params.exposure.coarseExpHi * 256 +
- cam->params.exposure.coarseExpLo;
+ cam->params.exposure.coarseExpLo;
if(!cam->params.flickerControl.disabled) {
/* Flicker control on */
@@ -2667,11 +2667,11 @@
cam->exposure_status = EXPOSURE_NORMAL;
}
}
-
+
framerate = cam->fps;
if(framerate > 30 || framerate < 1)
framerate = 1;
-
+
if(!cam->params.flickerControl.disabled) {
/* Flicker control on */
if((cam->exposure_status == EXPOSURE_VERY_DARK ||
@@ -2683,10 +2683,10 @@
++cam->params.sensorFps.divisor;
cam->cmd_queue |= COMMAND_SETSENSORFPS;
- cam->params.flickerControl.coarseJump =
+ cam->params.flickerControl.coarseJump =
flicker_jumps[cam->mainsFreq]
- [cam->params.sensorFps.baserate]
- [cam->params.sensorFps.divisor];
+ [cam->params.sensorFps.baserate]
+ [cam->params.sensorFps.divisor];
cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
new_exposure = cam->params.flickerControl.coarseJump-1;
@@ -2704,15 +2704,15 @@
cam->params.sensorFps.divisor > 0) {
/* light for too long */
- int max_exp = FIRMWARE_VERSION(1,2) ? MAX_EXP_102 : MAX_EXP ;
+ int max_exp = FIRMWARE_VERSION(1,2) ? MAX_EXP_102 : MAX_EXP ;
--cam->params.sensorFps.divisor;
cam->cmd_queue |= COMMAND_SETSENSORFPS;
- cam->params.flickerControl.coarseJump =
+ cam->params.flickerControl.coarseJump =
flicker_jumps[cam->mainsFreq]
- [cam->params.sensorFps.baserate]
- [cam->params.sensorFps.divisor];
+ [cam->params.sensorFps.baserate]
+ [cam->params.sensorFps.divisor];
cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
new_exposure = cam->params.flickerControl.coarseJump-1;
@@ -2772,7 +2772,7 @@
It also adjust the colour balance when an exposure step is detected - as
long as flicker is running
-*/
+*/
static void restart_flicker(struct cam_data *cam)
{
int cam_exposure, old_exp;
@@ -2786,22 +2786,22 @@
}
cam_exposure = cam->raw_image[39]*2;
old_exp = cam->params.exposure.coarseExpLo +
- cam->params.exposure.coarseExpHi*256;
- /*
- see how far away camera exposure is from a valid
- flicker exposure value
- */
- cam_exposure %= cam->params.flickerControl.coarseJump;
+ cam->params.exposure.coarseExpHi*256;
+ /*
+ see how far away camera exposure is from a valid
+ flicker exposure value
+ */
+ cam_exposure %= cam->params.flickerControl.coarseJump;
if(!cam->params.flickerControl.disabled &&
- cam_exposure <= cam->params.flickerControl.coarseJump - 3) {
+ cam_exposure <= cam->params.flickerControl.coarseJump - 3) {
/* Flicker control auto-disabled */
cam->params.flickerControl.disabled = 1;
}
-
+
if(cam->params.flickerControl.disabled &&
cam->params.flickerControl.flickerMode &&
old_exp > cam->params.flickerControl.coarseJump +
- ROUND_UP_EXP_FOR_FLICKER) {
+ ROUND_UP_EXP_FOR_FLICKER) {
/* exposure is now high enough to switch
flicker control back on */
set_flicker(&cam->params, &cam->cmd_queue, 1);
@@ -2818,7 +2818,7 @@
{
/* FIXME: Does this actually work? */
LOG("Clearing stall\n");
-
+
cam->ops->streamRead(cam->lowlevel_data, cam->raw_image, 0);
do_command(cam, CPIA_COMMAND_GetCameraStatus,0,0,0,0);
return cam->params.status.streamState != STREAM_PAUSED;
@@ -2878,7 +2878,7 @@
return -EINTR;
do_command(cam, CPIA_COMMAND_GetCameraStatus,
- 0, 0, 0, 0);
+ 0, 0, 0, 0);
}
if(cam->params.status.streamState != STREAM_READY) {
continue;
@@ -2903,18 +2903,18 @@
/* Switch flicker control back on if it got turned off */
restart_flicker(cam);
-
+
/* If AEC is enabled, monitor the exposure and
adjust the sensor frame rate if needed */
if(cam->params.exposure.expMode == 2)
monitor_exposure(cam);
-
+
/* camera idle now so dispatch queued commands */
dispatch_commands(cam);
/* Update our knowledge of the camera state */
- do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0);
- do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
+ do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0);
+ do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
do_command(cam, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0);
/* decompress and convert image to by copying it from
@@ -2933,7 +2933,7 @@
uncompressed. */
cam->first_frame = 1;
do_command(cam, CPIA_COMMAND_SetGrabMode,
- CPIA_GRAB_SINGLE, 0, 0, 0);
+ CPIA_GRAB_SINGLE, 0, 0, 0);
/* FIXME: Trial & error - need up to 70ms for
the grab mode change to complete ? */
msleep_interruptible(70);
@@ -2957,12 +2957,12 @@
if (cam->first_frame) {
cam->first_frame = 0;
do_command(cam, CPIA_COMMAND_SetCompression,
- cam->params.compression.mode,
+ cam->params.compression.mode,
cam->params.compression.decimation, 0, 0);
/* Switch from single-grab to continuous grab */
do_command(cam, CPIA_COMMAND_SetGrabMode,
- CPIA_GRAB_CONTINUOUS, 0, 0, 0);
+ CPIA_GRAB_CONTINUOUS, 0, 0, 0);
}
return 0;
}
@@ -2977,12 +2977,12 @@
if ((err = allocate_frame_buf(cam)))
return err;
}
-
+
cam->curframe = vm->frame;
cam->frame[cam->curframe].state = FRAME_READY;
return fetch_frame(cam);
}
-
+
static int goto_high_power(struct cam_data *cam)
{
if (do_command(cam, CPIA_COMMAND_GotoHiPower, 0, 0, 0, 0))
@@ -3039,22 +3039,22 @@
static int set_camera_state(struct cam_data *cam)
{
cam->cmd_queue = COMMAND_SETCOMPRESSION |
- COMMAND_SETCOMPRESSIONTARGET |
- COMMAND_SETCOLOURPARAMS |
- COMMAND_SETFORMAT |
- COMMAND_SETYUVTHRESH |
- COMMAND_SETECPTIMING |
- COMMAND_SETCOMPRESSIONPARAMS |
- COMMAND_SETEXPOSURE |
- COMMAND_SETCOLOURBALANCE |
- COMMAND_SETSENSORFPS |
- COMMAND_SETAPCOR |
- COMMAND_SETFLICKERCTRL |
- COMMAND_SETVLOFFSET;
+ COMMAND_SETCOMPRESSIONTARGET |
+ COMMAND_SETCOLOURPARAMS |
+ COMMAND_SETFORMAT |
+ COMMAND_SETYUVTHRESH |
+ COMMAND_SETECPTIMING |
+ COMMAND_SETCOMPRESSIONPARAMS |
+ COMMAND_SETEXPOSURE |
+ COMMAND_SETCOLOURBALANCE |
+ COMMAND_SETSENSORFPS |
+ COMMAND_SETAPCOR |
+ COMMAND_SETFLICKERCTRL |
+ COMMAND_SETVLOFFSET;
do_command(cam, CPIA_COMMAND_SetGrabMode, CPIA_GRAB_SINGLE,0,0,0);
dispatch_commands(cam);
-
+
/* Wait 6 frames for the sensor to get all settings and
AEC/ACB to settle */
msleep_interruptible(6*(cam->params.sensorFps.baserate ? 33 : 40) *
@@ -3062,7 +3062,7 @@
if(signal_pending(current))
return -EINTR;
-
+
save_camera_state(cam);
return 0;
@@ -3094,9 +3094,9 @@
if (goto_low_power(cam))
return -ENODEV;
}
-
+
/* procedure described in developer's guide p3-28 */
-
+
/* Check the firmware version. */
cam->params.version.firmwareVersion = 0;
get_version_information(cam);
@@ -3113,14 +3113,14 @@
cam->params.qx3.qx3_detected = (cam->params.pnpID.vendor == 0x0813 &&
cam->params.pnpID.product == 0x0001);
- /* The fatal error checking should be done after
+ /* The fatal error checking should be done after
* the camera powers up (developer's guide p 3-38) */
/* Set streamState before transition to high power to avoid bug
* in firmware 1-02 */
do_command(cam, CPIA_COMMAND_ModifyCameraStatus, STREAMSTATE, 0,
- STREAM_NOT_READY, 0);
-
+ STREAM_NOT_READY, 0);
+
/* GotoHiPower */
err = goto_high_power(cam);
if (err)
@@ -3142,16 +3142,16 @@
/* Firmware 1-02 may do this for parallel port cameras,
* just clear the flags (developer's guide p 3-38) */
do_command(cam, CPIA_COMMAND_ModifyCameraStatus,
- FATALERROR, ~(COM_FLAG|CPIA_FLAG), 0, 0);
+ FATALERROR, ~(COM_FLAG|CPIA_FLAG), 0, 0);
}
}
-
+
/* Check the camera status again */
if (cam->params.status.fatalError) {
if (cam->params.status.fatalError)
return -EIO;
}
-
+
/* VPVersion can't be retrieved before the camera is in HiPower,
* so get it here instead of in get_version_information. */
do_command(cam, CPIA_COMMAND_GetVPVersion, 0, 0, 0, 0);
@@ -3193,24 +3193,24 @@
if (!cam->raw_image)
goto oops;
}
-
+
if (!cam->decompressed_frame.data) {
cam->decompressed_frame.data = rvmalloc(CPIA_MAX_FRAME_SIZE);
if (!cam->decompressed_frame.data)
goto oops;
}
-
+
/* open cpia */
err = -ENODEV;
if (cam->ops->open(cam->lowlevel_data))
goto oops;
-
+
/* reset the camera */
if ((err = reset_camera(cam)) != 0) {
cam->ops->close(cam->lowlevel_data);
goto oops;
}
-
+
err = -EINTR;
if(signal_pending(current))
goto oops;
@@ -3224,7 +3224,7 @@
/* init it to something */
cam->mmap_kludge = 0;
-
+
++cam->open_count;
file->private_data = dev;
mutex_unlock(&cam->busy_lock);
@@ -3250,10 +3250,10 @@
struct cam_data *cam = dev->priv;
if (cam->ops) {
- /* Return ownership of /proc/cpia/videoX to root */
+ /* Return ownership of /proc/cpia/videoX to root */
if(cam->proc_entry)
cam->proc_entry->uid = 0;
-
+
/* save camera state for later open (developers guide ch 3.5.3) */
save_camera_state(cam);
@@ -3342,7 +3342,7 @@
return -EFAULT;
}
if (copy_to_user(buf, cam->decompressed_frame.data,
- cam->decompressed_frame.count)) {
+ cam->decompressed_frame.count)) {
DBG("copy_to_user failed\n");
mutex_unlock(&cam->busy_lock);
return -EFAULT;
@@ -3361,7 +3361,7 @@
if (!cam || !cam->ops)
return -ENODEV;
-
+
/* make this _really_ smp-safe */
if (mutex_lock_interruptible(&cam->busy_lock))
return -EINTR;
@@ -3405,7 +3405,7 @@
v->norm = 0;
break;
}
-
+
case VIDIOCSCHAN:
{
struct video_channel *v = arg;
@@ -3424,7 +3424,7 @@
*pic = cam->vp;
break;
}
-
+
case VIDIOCSPICT:
{
struct video_picture *vp = arg;
@@ -3458,11 +3458,11 @@
/* Adjust flicker control if necessary */
if(cam->params.flickerControl.allowableOverExposure < 0)
- cam->params.flickerControl.allowableOverExposure =
+ cam->params.flickerControl.allowableOverExposure =
-find_over_exposure(cam->params.colourParams.brightness);
if(cam->params.flickerControl.flickerMode != 0)
cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
-
+
/* queue command to update camera */
cam->cmd_queue |= COMMAND_SETCOLOURPARAMS;
@@ -3482,7 +3482,7 @@
*vw = cam->vw;
break;
}
-
+
case VIDIOCSWIN:
{
/* copy_from_user, check validity, copy to internal structure */
@@ -3514,7 +3514,7 @@
/* video size is changing, reset the subcapture area */
memset(&cam->vc, 0, sizeof(cam->vc));
-
+
set_vw_size(cam);
DBG("%d / %d\n", cam->vw.width, cam->vw.height);
cam->cmd_queue |= COMMAND_SETFORMAT;
@@ -3547,7 +3547,7 @@
vm->offsets[i] = CPIA_MAX_FRAME_SIZE * i;
break;
}
-
+
case VIDIOCMCAPTURE:
{
struct video_mmap *vm = arg;
@@ -3597,7 +3597,7 @@
/* video size is changing, reset the subcapture area */
memset(&cam->vc, 0, sizeof(cam->vc));
-
+
set_vw_size(cam);
cam->cmd_queue |= COMMAND_SETFORMAT;
dispatch_commands(cam);
@@ -3608,7 +3608,7 @@
break;
}
-
+
case VIDIOCSYNC:
{
int *frame = arg;
@@ -3649,7 +3649,7 @@
*vc = cam->vc;
break;
- }
+ }
case VIDIOCSCAPTURE:
{
@@ -3665,7 +3665,7 @@
retval = -EINVAL;
break;
}
-
+
/* Clip to the resolution we can set for the ROI
(every 8 columns and 4 rows) */
vc->x = vc->x & ~(__u32)7;
@@ -3681,14 +3681,14 @@
}
DBG("%d,%d/%dx%d\n", vc->x,vc->y,vc->width, vc->height);
-
+
mutex_lock(&cam->param_lock);
-
+
cam->vc.x = vc->x;
cam->vc.y = vc->y;
cam->vc.width = vc->width;
cam->vc.height = vc->height;
-
+
set_vw_size(cam);
cam->cmd_queue |= COMMAND_SETFORMAT;
@@ -3699,7 +3699,7 @@
dispatch_commands(cam);
break;
}
-
+
case VIDIOCGUNIT:
{
struct video_unit *vu = arg;
@@ -3715,7 +3715,7 @@
break;
}
-
+
/* pointless to implement overlay with this camera */
case VIDIOCCAPTURE:
case VIDIOCGFBUF:
@@ -3738,7 +3738,7 @@
mutex_unlock(&cam->busy_lock);
return retval;
-}
+}
static int cpia_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
@@ -3759,7 +3759,7 @@
if (!cam || !cam->ops)
return -ENODEV;
-
+
DBG("cpia_mmap: %ld\n", size);
if (size > FRAME_NUM*CPIA_MAX_FRAME_SIZE)
@@ -3767,7 +3767,7 @@
if (!cam || !cam->ops)
return -ENODEV;
-
+
/* make this _really_ smp-safe */
if (mutex_lock_interruptible(&cam->busy_lock))
return -EINTR;
@@ -3851,11 +3851,11 @@
cam->params.flickerControl.flickerMode = 0;
cam->params.flickerControl.disabled = 1;
- cam->params.flickerControl.coarseJump =
+ cam->params.flickerControl.coarseJump =
flicker_jumps[cam->mainsFreq]
- [cam->params.sensorFps.baserate]
- [cam->params.sensorFps.divisor];
- cam->params.flickerControl.allowableOverExposure =
+ [cam->params.sensorFps.baserate]
+ [cam->params.sensorFps.divisor];
+ cam->params.flickerControl.allowableOverExposure =
-find_over_exposure(cam->params.colourParams.brightness);
cam->params.vlOffset.gain1 = 20;
cam->params.vlOffset.gain2 = 24;
@@ -3870,21 +3870,21 @@
cam->params.compressionParams.qDiffStepThresh = 3;
cam->params.compressionParams.decimationThreshMod = 2;
/* End of default values from Software Developer's Guide */
-
+
cam->transfer_rate = 0;
cam->exposure_status = EXPOSURE_NORMAL;
-
+
/* Set Sensor FPS to 15fps. This seems better than 30fps
* for indoor lighting. */
cam->params.sensorFps.divisor = 1;
cam->params.sensorFps.baserate = 1;
-
+
cam->params.yuvThreshold.yThreshold = 6; /* From windows driver */
cam->params.yuvThreshold.uvThreshold = 6; /* From windows driver */
-
+
cam->params.format.subSample = SUBSAMPLE_422;
cam->params.format.yuvOrder = YUVORDER_YUYV;
-
+
cam->params.compression.mode = CPIA_COMPRESSION_AUTO;
cam->params.compressionTarget.frTargeting =
CPIA_COMPRESSION_TARGET_QUALITY;
@@ -3898,7 +3898,7 @@
cam->params.qx3.cradled = 0;
cam->video_size = VIDEOSIZE_CIF;
-
+
cam->vp.colour = 32768; /* 50% */
cam->vp.hue = 32768; /* 50% */
cam->vp.brightness = 32768; /* 50% */
@@ -3911,7 +3911,7 @@
cam->vc.y = 0;
cam->vc.width = 0;
cam->vc.height = 0;
-
+
cam->vw.x = 0;
cam->vw.y = 0;
set_vw_size(cam);
@@ -3928,7 +3928,7 @@
/* initialize cam_data structure */
static void init_camera_struct(struct cam_data *cam,
- struct cpia_camera_ops *ops )
+ struct cpia_camera_ops *ops )
{
int i;
@@ -3945,7 +3945,7 @@
memcpy(&cam->vdev, &cpia_template, sizeof(cpia_template));
cam->vdev.priv = cam;
-
+
cam->curframe = 0;
for (i = 0; i < FRAME_NUM; i++) {
cam->frame[i].width = 0;
@@ -3961,15 +3961,15 @@
struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowlevel)
{
- struct cam_data *camera;
-
+ struct cam_data *camera;
+
if ((camera = kmalloc(sizeof(struct cam_data), GFP_KERNEL)) == NULL)
return NULL;
-
+
init_camera_struct( camera, ops );
camera->lowlevel_data = lowlevel;
-
+
/* register v4l device */
if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
kfree(camera);
@@ -3982,7 +3982,7 @@
/* open cpia */
if (camera->ops->open(camera->lowlevel_data))
return camera;
-
+
/* reset the camera */
if (reset_camera(camera) != 0) {
camera->ops->close(camera->lowlevel_data);
@@ -4022,11 +4022,11 @@
DBG("camera open -- setting ops to NULL\n");
cam->ops = NULL;
}
-
+
#ifdef CONFIG_PROC_FS
DBG("destroying /proc/cpia/video%d\n", cam->vdev.minor);
destroy_proc_cpia_cam(cam);
-#endif
+#endif
if (!cam->open_count) {
DBG("freeing camera\n");
kfree(cam);
diff --git a/drivers/media/video/cpia.h b/drivers/media/video/cpia.h
index de66782..dde27a6 100644
--- a/drivers/media/video/cpia.h
+++ b/drivers/media/video/cpia.h
@@ -52,10 +52,10 @@
struct cpia_camera_ops
{
/* open sets privdata to point to structure for this camera.
- * Returns negative value on error, otherwise 0.
+ * Returns negative value on error, otherwise 0.
*/
int (*open)(void *privdata);
-
+
/* Registers callback function cb to be called with cbdata
* when an image is ready. If cb is NULL, only single image grabs
* should be used. cb should immediately call streamRead to read
@@ -63,8 +63,8 @@
* otherwise 0.
*/
int (*registerCallback)(void *privdata, void (*cb)(void *cbdata),
- void *cbdata);
-
+ void *cbdata);
+
/* transferCmd sends commands to the camera. command MUST point to
* an 8 byte buffer in kernel space. data can be NULL if no extra
* data is needed. The size of the data is given by the last 2
@@ -77,30 +77,30 @@
* Returns negative value on error, otherwise 0.
*/
int (*streamStart)(void *privdata);
-
+
/* streamStop terminates stream capture mode.
* Returns negative value on error, otherwise 0.
*/
int (*streamStop)(void *privdata);
-
+
/* streamRead reads a frame from the camera. buffer points to a
- * buffer large enough to hold a complete frame in kernel space.
- * noblock indicates if this should be a non blocking read.
+ * buffer large enough to hold a complete frame in kernel space.
+ * noblock indicates if this should be a non blocking read.
* Returns the number of bytes read, or negative value on error.
- */
+ */
int (*streamRead)(void *privdata, u8 *buffer, int noblock);
-
+
/* close disables the device until open() is called again.
* Returns negative value on error, otherwise 0.
*/
int (*close)(void *privdata);
-
+
/* If wait_for_stream_ready is non-zero, wait until the streamState
* is STREAM_READY before calling streamRead.
*/
int wait_for_stream_ready;
- /*
+ /*
* Used to maintain lowlevel module usage counts
*/
struct module *owner;
@@ -215,14 +215,14 @@
u8 videoSize; /* CIF/QCIF */
u8 subSample;
u8 yuvOrder;
- } format;
- struct { /* Intel QX3 specific data */
- u8 qx3_detected; /* a QX3 is present */
- u8 toplight; /* top light lit , R/W */
- u8 bottomlight; /* bottom light lit, R/W */
- u8 button; /* snapshot button pressed (R/O) */
- u8 cradled; /* microscope is in cradle (R/O) */
- } qx3;
+ } format;
+ struct { /* Intel QX3 specific data */
+ u8 qx3_detected; /* a QX3 is present */
+ u8 toplight; /* top light lit , R/W */
+ u8 bottomlight; /* bottom light lit, R/W */
+ u8 button; /* snapshot button pressed (R/O) */
+ u8 cradled; /* microscope is in cradle (R/O) */
+ } qx3;
struct {
u8 colStart; /* skip first 8*colStart pixels */
u8 colEnd; /* finish at 8*colEnd pixels */
@@ -247,13 +247,13 @@
struct cam_data {
struct list_head cam_data_list;
- struct mutex busy_lock; /* guard against SMP multithreading */
+ struct mutex busy_lock; /* guard against SMP multithreading */
struct cpia_camera_ops *ops; /* lowlevel driver operations */
void *lowlevel_data; /* private data for lowlevel driver */
u8 *raw_image; /* buffer for raw image data */
struct cpia_frame decompressed_frame;
- /* buffer to hold decompressed frame */
- int image_size; /* sizeof last decompressed image */
+ /* buffer to hold decompressed frame */
+ int image_size; /* sizeof last decompressed image */
int open_count; /* # of process that have camera open */
/* camera status */
@@ -265,7 +265,7 @@
struct mutex param_lock; /* params lock for this camera */
struct cam_params params; /* camera settings */
struct proc_dir_entry *proc_entry; /* /proc/cpia/videoX */
-
+
/* v4l */
int video_size; /* VIDEO_SIZE_ */
volatile enum v4l_camstates camstate; /* v4l layer status */
@@ -277,7 +277,7 @@
/* mmap interface */
int curframe; /* the current frame to grab into */
u8 *frame_buf; /* frame buffer data */
- struct cpia_frame frame[FRAME_NUM];
+ struct cpia_frame frame[FRAME_NUM];
/* FRAME_NUM-buffering, so we need a array */
int first_frame;
@@ -424,7 +424,7 @@
#define DEB_BYTE(p)\
DBG("%1d %1d %1d %1d %1d %1d %1d %1d \n",\
(p)&0x80?1:0, (p)&0x40?1:0, (p)&0x20?1:0, (p)&0x10?1:0,\
- (p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0);
+ (p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0);
#endif /* __KERNEL__ */
diff --git a/drivers/media/video/cpia_pp.c b/drivers/media/video/cpia_pp.c
index 74cff62..3021f21 100644
--- a/drivers/media/video/cpia_pp.c
+++ b/drivers/media/video/cpia_pp.c
@@ -23,7 +23,7 @@
*/
/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_ 1 */
+/* #define _CPIA_DEBUG_ 1 */
#include <linux/config.h>
@@ -45,7 +45,7 @@
static int cpia_pp_open(void *privdata);
static int cpia_pp_registerCallback(void *privdata, void (*cb) (void *cbdata),
- void *cbdata);
+ void *cbdata);
static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data);
static int cpia_pp_streamStart(void *privdata);
static int cpia_pp_streamStop(void *privdata);
@@ -93,7 +93,7 @@
int stream_irq;
};
-static struct cpia_camera_ops cpia_pp_ops =
+static struct cpia_camera_ops cpia_pp_ops =
{
cpia_pp_open,
cpia_pp_registerCallback,
@@ -123,7 +123,7 @@
}
/* Special CPiA PPC modes: These are invoked by using the 1284 Extensibility
- * Link Flag during negotiation */
+ * Link Flag during negotiation */
#define UPLOAD_FLAG 0x08
#define NIBBLE_TRANSFER 0x01
#define ECP_TRANSFER 0x03
@@ -139,17 +139,17 @@
/* CPiA nonstandard "Nibble" mode (no nDataAvail signal after each byte). */
/* The standard kernel parport_ieee1284_read_nibble() fails with the CPiA... */
-static size_t cpia_read_nibble (struct parport *port,
- void *buffer, size_t len,
+static size_t cpia_read_nibble (struct parport *port,
+ void *buffer, size_t len,
int flags)
{
- /* adapted verbatim, with one change, from
+ /* adapted verbatim, with one change, from
parport_ieee1284_read_nibble() in drivers/parport/ieee1284-ops.c */
unsigned char *buf = buffer;
int i;
unsigned char byte = 0;
-
+
len *= 2; /* in nibbles */
for (i=0; i < len; i++) {
unsigned char nibble;
@@ -158,12 +158,12 @@
* after every second nibble to signal that more
* data is available. (the total number of Bytes that
* should be sent is known; if too few are received, an error
- * will be recorded after a timeout).
+ * will be recorded after a timeout).
* This is incompatible with parport_ieee1284_read_nibble(),
* which expects to find nFault LO after every second nibble.
*/
- /* Solution: modify cpia_read_nibble to only check for
+ /* Solution: modify cpia_read_nibble to only check for
* nDataAvail before the first nibble is sent.
*/
@@ -216,7 +216,7 @@
/* Second nibble */
byte |= nibble << 4;
*buf++ = byte;
- } else
+ } else
byte = nibble;
}
@@ -238,18 +238,18 @@
}
/* CPiA nonstandard "Nibble Stream" mode (2 nibbles per cycle, instead of 1)
- * (See CPiA Data sheet p. 31)
- *
- * "Nibble Stream" mode used by CPiA for uploads to non-ECP ports is a
- * nonstandard variant of nibble mode which allows the same (mediocre)
- * data flow of 8 bits per cycle as software-enabled ECP by TRISTATE-capable
+ * (See CPiA Data sheet p. 31)
+ *
+ * "Nibble Stream" mode used by CPiA for uploads to non-ECP ports is a
+ * nonstandard variant of nibble mode which allows the same (mediocre)
+ * data flow of 8 bits per cycle as software-enabled ECP by TRISTATE-capable
* parallel ports, but works also for non-TRISTATE-capable ports.
* (Standard nibble mode only send 4 bits per cycle)
*
*/
-static size_t cpia_read_nibble_stream(struct parport *port,
- void *buffer, size_t len,
+static size_t cpia_read_nibble_stream(struct parport *port,
+ void *buffer, size_t len,
int flags)
{
int i;
@@ -260,7 +260,7 @@
unsigned char nibble[2], byte = 0;
int j;
- /* Image Data is complete when 4 consecutive EOI bytes (0xff) are seen */
+ /* Image Data is complete when 4 consecutive EOI bytes (0xff) are seen */
if (endseen > 3 )
break;
@@ -268,7 +268,7 @@
parport_frob_control (port,
PARPORT_CONTROL_AUTOFD,
PARPORT_CONTROL_AUTOFD);
-
+
/* Event 9: nAck goes low. */
port->ieee1284.phase = IEEE1284_PH_REV_DATA;
if (parport_wait_peripheral (port,
@@ -282,7 +282,7 @@
/* Read lower nibble */
nibble[0] = parport_read_status (port) >>3;
-
+
/* Event 10: Set nAutoFd high. */
parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
@@ -295,10 +295,10 @@
port->name);
break;
}
-
+
/* Read upper nibble */
nibble[1] = parport_read_status (port) >>3;
-
+
/* reassemble the byte */
for (j = 0; j < 2 ; j++ ) {
nibble[j] &= ~8;
@@ -335,8 +335,8 @@
static int ForwardSetup(struct pp_cam_entry *cam)
{
int retry;
-
- /* The CPiA uses ECP protocol for Downloads from the Host to the camera.
+
+ /* The CPiA uses ECP protocol for Downloads from the Host to the camera.
* This will be software-emulated if ECP hardware is not present
*/
@@ -375,9 +375,9 @@
upload_mode = mode;
if(extensibility) mode = UPLOAD_FLAG|transfer_mode|IEEE1284_EXT_LINK;
- /* the usual camera maximum response time is 10ms, but after
+ /* the usual camera maximum response time is 10ms, but after
* receiving some commands, it needs up to 40ms. */
-
+
for(retry = 0; retry < 4; ++retry) {
if(!parport_negotiate(cam->port, mode)) {
break;
@@ -439,10 +439,10 @@
/* support for CPiA variant nibble reads */
if(cam->port->ieee1284.mode == IEEE1284_MODE_NIBBLE) {
- if(cpia_read_nibble(cam->port, packet, size, 0) != size)
- retval = -EIO;
+ if(cpia_read_nibble(cam->port, packet, size, 0) != size)
+ retval = -EIO;
} else {
- if(parport_read(cam->port, packet, size) != size)
+ if(parport_read(cam->port, packet, size) != size)
retval = -EIO;
}
EndTransferMode(cam);
@@ -542,18 +542,18 @@
block_size = PARPORT_CHUNK_SIZE;
while( !cam->image_complete ) {
cond_resched();
-
+
new_bytes = cpia_pp_read(cam->port, buffer, block_size );
if( new_bytes <= 0 ) {
break;
}
i=-1;
while(++i<new_bytes && endseen<4) {
- if(*buffer==EOI) {
- endseen++;
- } else {
- endseen=0;
- }
+ if(*buffer==EOI) {
+ endseen++;
+ } else {
+ endseen=0;
+ }
buffer++;
}
read_bytes += i;
@@ -601,7 +601,7 @@
}
if((err = ReadPacket(cam, buffer, 8)) < 0) {
DBG("Error reading command result\n");
- return err;
+ return err;
}
memcpy(data, buffer, databytes);
} else if(command[0] == DATA_OUT) {
@@ -631,10 +631,10 @@
static int cpia_pp_open(void *privdata)
{
struct pp_cam_entry *cam = (struct pp_cam_entry *)privdata;
-
+
if (cam == NULL)
return -EINVAL;
-
+
if(cam->open_count == 0) {
if (parport_claim(cam->pdev)) {
DBG("failed to claim the port\n");
@@ -645,12 +645,12 @@
parport_write_control(cam->port, PARPORT_CONTROL_SELECT);
udelay(50);
parport_write_control(cam->port,
- PARPORT_CONTROL_SELECT
- | PARPORT_CONTROL_INIT);
+ PARPORT_CONTROL_SELECT
+ | PARPORT_CONTROL_INIT);
}
-
+
++cam->open_count;
-
+
return 0;
}
@@ -663,7 +663,7 @@
{
struct pp_cam_entry *cam = privdata;
int retval = 0;
-
+
if(cam->port->irq != PARPORT_IRQ_NONE) {
INIT_WORK(&cam->cb_task, cb, cbdata);
} else {
@@ -707,9 +707,9 @@
LOG("failed to allocate camera structure\n");
return -ENOMEM;
}
-
+
pdev = parport_register_device(port, "cpia_pp", NULL, NULL,
- NULL, 0, cam);
+ NULL, 0, cam);
if (!pdev) {
LOG("failed to parport_register_device\n");
@@ -753,19 +753,19 @@
}
cpia = NULL;
}
- spin_unlock( &cam_list_lock_pp );
+ spin_unlock( &cam_list_lock_pp );
if (!cpia) {
DBG("cpia_pp_detach failed to find cam_data in cam_list\n");
return;
}
-
- cam = (struct pp_cam_entry *) cpia->lowlevel_data;
+
+ cam = (struct pp_cam_entry *) cpia->lowlevel_data;
cpia_unregister_camera(cpia);
- if(cam->open_count > 0)
+ if(cam->open_count > 0)
cpia_pp_close(cam);
parport_unregister_device(cam->pdev);
- cpia->lowlevel_data = NULL;
+ cpia->lowlevel_data = NULL;
kfree(cam);
}
@@ -805,14 +805,14 @@
int cpia_pp_init(void)
{
- printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
+ printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
CPIA_PP_MAJ_VER,CPIA_PP_MIN_VER,CPIA_PP_PATCH_VER);
if(parport_nr[0] == PPCPIA_PARPORT_OFF) {
printk(" disabled\n");
return 0;
}
-
+
spin_lock_init( &cam_list_lock_pp );
if (parport_register_driver (&cpia_pp_driver)) {
diff --git a/drivers/media/video/cpia_usb.c b/drivers/media/video/cpia_usb.c
index 03275c3..9c49a4b 100644
--- a/drivers/media/video/cpia_usb.c
+++ b/drivers/media/video/cpia_usb.c
@@ -22,7 +22,7 @@
*/
/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_ 1 */
+/* #define _CPIA_DEBUG_ 1 */
#include <linux/module.h>
#include <linux/kernel.h>
@@ -85,7 +85,7 @@
static int cpia_usb_open(void *privdata);
static int cpia_usb_registerCallback(void *privdata, void (*cb) (void *cbdata),
- void *cbdata);
+ void *cbdata);
static int cpia_usb_transferCmd(void *privdata, u8 *command, u8 *data);
static int cpia_usb_streamStart(void *privdata);
static int cpia_usb_streamStop(void *privdata);
@@ -127,7 +127,7 @@
ucpia->workbuff->status = FRAME_READING;
ucpia->workbuff->length = 0;
}
-
+
for (i = 0; i < urb->number_of_packets; i++) {
int n = urb->iso_frame_desc[i].actual_length;
int st = urb->iso_frame_desc[i].status;
@@ -141,9 +141,9 @@
printk(KERN_DEBUG "cpia: scratch buf overflow!scr_len: %d, n: %d\n", ucpia->workbuff->length, n);
return;
}
-
+
if (n) {
- if ((ucpia->workbuff->length > 0) ||
+ if ((ucpia->workbuff->length > 0) ||
(0x19 == cdata[0] && 0x68 == cdata[1])) {
memcpy(ucpia->workbuff->data + ucpia->workbuff->length, cdata, n);
ucpia->workbuff->length += n;
@@ -160,7 +160,7 @@
ucpia->workbuff = ucpia->workbuff->next;
ucpia->workbuff->status = FRAME_EMPTY;
ucpia->workbuff->length = 0;
-
+
if (waitqueue_active(&ucpia->wq_stream))
wake_up_interruptible(&ucpia->wq_stream);
}
@@ -178,7 +178,7 @@
struct usb_cpia *ucpia = (struct usb_cpia *) privdata;
struct urb *urb;
int ret, retval = 0, fx, err;
-
+
if (!ucpia)
return -EINVAL;
@@ -191,7 +191,7 @@
retval = -EINVAL;
goto error_0;
}
-
+
ret = usb_set_interface(ucpia->dev, ucpia->iface, 3);
if (ret < 0) {
printk(KERN_ERR "cpia_usb_open: usb_set_interface error (ret = %d)\n", ret);
@@ -286,7 +286,7 @@
error_0:
kfree (ucpia->sbuf[0].data);
ucpia->sbuf[0].data = NULL;
-
+
return retval;
}
@@ -307,7 +307,7 @@
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
packet[1] + (packet[0] << 8),
USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- packet[2] + (packet[3] << 8),
+ packet[2] + (packet[3] << 8),
packet[4] + (packet[5] << 8), buf, size, 1000);
}
@@ -324,7 +324,7 @@
return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
packet[1] + (packet[0] << 8),
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- packet[2] + (packet[3] << 8),
+ packet[2] + (packet[3] << 8),
packet[4] + (packet[5] << 8), buf, size, 1000);
}
@@ -393,7 +393,7 @@
if (!ucpia || !ucpia->present)
return -1;
-
+
if (ucpia->curbuff->status != FRAME_READY)
interruptible_sleep_on(&ucpia->wq_stream);
else
@@ -403,7 +403,7 @@
if (!mybuff)
return -1;
-
+
if (mybuff->status != FRAME_READY || mybuff->length < 4) {
DBG("Something went wrong!\n");
return -1;
@@ -411,7 +411,7 @@
memcpy(frame, mybuff->data, mybuff->length);
mybuff->status = FRAME_EMPTY;
-
+
/* DBG("read done, %d bytes, Header: %x/%x, Footer: %x%x%x%x\n", */
/* mybuff->length, frame[0], frame[1], */
/* frame[mybuff->length-4], frame[mybuff->length-3], */
@@ -447,7 +447,7 @@
kfree(ucpia->sbuf[1].data);
ucpia->sbuf[1].data = NULL;
-
+
if (ucpia->sbuf[0].urb) {
usb_kill_urb(ucpia->sbuf[0].urb);
usb_free_urb(ucpia->sbuf[0].urb);
@@ -490,7 +490,7 @@
struct usb_cpia *ucpia;
struct cam_data *cam;
int ret;
-
+
/* A multi-config CPiA camera? */
if (udev->descriptor.bNumConfigurations != 1)
return -ENODEV;
@@ -539,7 +539,7 @@
/* Before register_camera, important */
ucpia->present = 1;
-
+
cam = cpia_register_camera(&cpia_usb_ops, ucpia);
if (!cam) {
LOG("failed to cpia_register_camera\n");
@@ -591,7 +591,7 @@
struct cam_data *cam = usb_get_intfdata(intf);
struct usb_cpia *ucpia;
struct usb_device *udev;
-
+
usb_set_intfdata(intf, NULL);
if (!cam)
return;
@@ -600,7 +600,7 @@
spin_lock( &cam_list_lock_usb );
list_del(&cam->cam_data_list);
spin_unlock( &cam_list_lock_usb );
-
+
ucpia->present = 0;
cpia_unregister_camera(cam);
@@ -631,7 +631,7 @@
static int __init usb_cpia_init(void)
{
- printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
+ printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
CPIA_USB_MAJ_VER,CPIA_USB_MIN_VER,CPIA_USB_PATCH_VER);
spin_lock_init(&cam_list_lock_usb);
diff --git a/drivers/media/video/cs8420.h b/drivers/media/video/cs8420.h
index 2b22f3a..621c0c6 100644
--- a/drivers/media/video/cs8420.h
+++ b/drivers/media/video/cs8420.h
@@ -20,7 +20,7 @@
#define __CS8420_H__
/* Initialization Sequence */
-
+
static __u8 init8420[] = {
1, 0x01, 2, 0x02, 3, 0x00, 4, 0x46,
5, 0x24, 6, 0x84, 18, 0x18, 19, 0x13,
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 1774ab7..b9ba95f 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -86,7 +86,7 @@
return ret;
}
/*-------------------------------------------------------------------*/
-#ifdef DEBUG
+#ifdef DEBUG
static void dump_urb (struct urb *urb)
{
dbg("urb :%p", urb);
@@ -136,7 +136,7 @@
for (p = q->next; p != q;) {
b = list_entry (p, buff_t, buff_list);
-#ifdef DEBUG
+#ifdef DEBUG
dump_urb(b->purb);
#endif
kfree(b->purb->transfer_buffer);
@@ -287,7 +287,7 @@
}
}
-
+
if( ret == -EPIPE ) {
warn("CLEAR_FEATURE request to remove STALL condition.");
if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe)))
@@ -328,7 +328,7 @@
PINTEL_HEX_RECORD ptr = firmware;
dbg("Enter dabusb_loadmem (internal)");
-
+
ret = dabusb_8051_reset (s, 1);
while (ptr->Type == 0) {
@@ -449,7 +449,7 @@
if (!list_empty (&s->free_buff_list)) {
pbuff_t end;
int ret;
-
+
while (!dabusb_add_buf_tail (s, &s->rec_buff_list, &s->free_buff_list)) {
dbg("submitting: end:%p s->rec_buff_list:%p", s->rec_buff_list.prev, &s->rec_buff_list);
@@ -506,7 +506,7 @@
err("error: rec_buf_list is empty");
goto err;
}
-
+
b = list_entry (s->rec_buff_list.next, buff_t, buff_list);
purb = b->purb;
@@ -783,9 +783,9 @@
pdabusb_t s = usb_get_intfdata (intf);
dbg("dabusb_disconnect");
-
+
init_waitqueue_entry(&__wait, current);
-
+
usb_set_intfdata (intf, NULL);
if (s) {
usb_deregister_dev (intf, &dabusb_class);
@@ -797,7 +797,7 @@
schedule();
current->state = TASK_RUNNING;
remove_wait_queue(&s->remove_ok, &__wait);
-
+
s->usbdev = NULL;
s->overruns = 0;
}
diff --git a/drivers/media/video/dabusb.h b/drivers/media/video/dabusb.h
index 96b03e4..00eb34c 100644
--- a/drivers/media/video/dabusb.h
+++ b/drivers/media/video/dabusb.h
@@ -10,7 +10,7 @@
#define DABUSB_VERSION 0x1000
#define IOCTL_DAB_BULK _IOWR('d', 0x30, bulk_transfer_t)
#define IOCTL_DAB_OVERRUNS _IOR('d', 0x15, int)
-#define IOCTL_DAB_VERSION _IOR('d', 0x3f, int)
+#define IOCTL_DAB_VERSION _IOR('d', 0x3f, int)
#ifdef __KERNEL__
@@ -36,7 +36,7 @@
struct list_head rec_buff_list;
} dabusb_t,*pdabusb_t;
-typedef struct
+typedef struct
{
pdabusb_t s;
struct urb *purb;
diff --git a/drivers/media/video/dsbr100.c b/drivers/media/video/dsbr100.c
index 2564680..3b4e998 100644
--- a/drivers/media/video/dsbr100.c
+++ b/drivers/media/video/dsbr100.c
@@ -37,28 +37,28 @@
Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing
Version 0.30:
- Markus: Updates for 2.5.x kernel and more ISO compliant source
+ Markus: Updates for 2.5.x kernel and more ISO compliant source
Version 0.25:
- PSL and Markus: Cleanup, radio now doesn't stop on device close
+ PSL and Markus: Cleanup, radio now doesn't stop on device close
Version 0.24:
- Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally
+ Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally
right. Some minor cleanup, improved standalone compilation
Version 0.23:
- Markus: Sign extension bug fixed by declaring transfer_buffer unsigned
+ Markus: Sign extension bug fixed by declaring transfer_buffer unsigned
Version 0.22:
- Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns,
+ Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns,
thanks to Mike Cox for pointing the problem out.
Version 0.21:
- Markus: Minor cleanup, warnings if something goes wrong, lame attempt
+ Markus: Minor cleanup, warnings if something goes wrong, lame attempt
to adhere to Documentation/CodingStyle
- Version 0.2:
- Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module
+ Version 0.2:
+ Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module
Markus: Copyright clarification
Version 0.01: Markus: initial release
@@ -163,11 +163,11 @@
static int dsbr100_start(dsbr100_device *radio)
{
if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
+ USB_REQ_GET_STATUS,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 ||
usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- DSB100_ONOFF,
+ DSB100_ONOFF,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x01, 0x00, radio->transfer_buffer, 8, 300)<0)
return -1;
@@ -179,11 +179,11 @@
static int dsbr100_stop(dsbr100_device *radio)
{
if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
+ USB_REQ_GET_STATUS,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 ||
usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- DSB100_ONOFF,
+ DSB100_ONOFF,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x00, 0x00, radio->transfer_buffer, 8, 300)<0)
return -1;
@@ -195,16 +195,16 @@
{
freq = (freq/16*80)/1000+856;
if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- DSB100_TUNE,
+ DSB100_TUNE,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- (freq>>8)&0x00ff, freq&0xff,
+ (freq>>8)&0x00ff, freq&0xff,
radio->transfer_buffer, 8, 300)<0 ||
usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
+ USB_REQ_GET_STATUS,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 ||
usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
+ USB_REQ_GET_STATUS,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x00, 0x24, radio->transfer_buffer, 8, 300)<0) {
radio->stereo = -1;
@@ -219,7 +219,7 @@
static void dsbr100_getstat(dsbr100_device *radio)
{
if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
- USB_REQ_GET_STATUS,
+ USB_REQ_GET_STATUS,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x00 , 0x24, radio->transfer_buffer, 8, 300)<0)
radio->stereo = -1;
@@ -232,7 +232,7 @@
/* check if the device is present and register with v4l and
usb if it is */
-static int usb_dsbr100_probe(struct usb_interface *intf,
+static int usb_dsbr100_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
dsbr100_device *radio;
@@ -243,7 +243,7 @@
kfree(radio);
return -ENOMEM;
}
- memcpy(radio->videodev, &dsbr100_videodev_template,
+ memcpy(radio->videodev, &dsbr100_videodev_template,
sizeof(dsbr100_videodev_template));
radio->removed = 0;
radio->users = 0;
@@ -310,7 +310,7 @@
struct video_tuner *v = arg;
dsbr100_getstat(radio);
- if(v->tuner) /* Only 1 tuner */
+ if(v->tuner) /* Only 1 tuner */
return -EINVAL;
v->rangelow = FREQ_MIN*FREQ_MUL;
v->rangehigh = FREQ_MAX*FREQ_MUL;
@@ -355,12 +355,12 @@
v->volume = 1;
v->step = 1;
strcpy(v->name, "Radio");
- return 0;
+ return 0;
}
case VIDIOCSAUDIO: {
struct video_audio *v = arg;
- if (v->audio)
+ if (v->audio)
return -EINVAL;
if (v->flags&VIDEO_AUDIO_MUTE) {
if (dsbr100_stop(radio)==-1)
diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h
index eee8afc..2e5ca40 100644
--- a/drivers/media/video/et61x251/et61x251.h
+++ b/drivers/media/video/et61x251/et61x251.h
@@ -180,7 +180,7 @@
void
et61x251_attach_sensor(struct et61x251_device* cam,
- struct et61x251_sensor* sensor)
+ struct et61x251_sensor* sensor)
{
memcpy(&cam->sensor, sensor, sizeof(struct et61x251_sensor));
}
@@ -199,7 +199,7 @@
dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
else if ((level) >= 3) \
dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
- __FUNCTION__, __LINE__ , ## args); \
+ __FUNCTION__, __LINE__ , ## args); \
} \
} while (0)
# define KDBG(level, fmt, args...) \
@@ -209,7 +209,7 @@
pr_info("et61x251: " fmt "\n", ## args); \
else if ((level) == 3) \
pr_debug("et61x251: [%s:%d] " fmt "\n", __FUNCTION__, \
- __LINE__ , ## args); \
+ __LINE__ , ## args); \
} \
} while (0)
# define V4LDBG(level, name, cmd) \
@@ -226,7 +226,7 @@
#undef PDBG
#define PDBG(fmt, args...) \
dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
- __FUNCTION__, __LINE__ , ## args)
+ __FUNCTION__, __LINE__ , ## args)
#undef PDBGG
#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 7cc01b8..dfc9dd7 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -44,7 +44,7 @@
/*****************************************************************************/
#define ET61X251_MODULE_NAME "V4L2 driver for ET61X[12]51 " \
- "PC Camera Controllers"
+ "PC Camera Controllers"
#define ET61X251_MODULE_AUTHOR "(C) 2006 Luca Risolia"
#define ET61X251_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
#define ET61X251_MODULE_LICENSE "GPL"
@@ -63,68 +63,68 @@
static short video_nr[] = {[0 ... ET61X251_MAX_DEVICES-1] = -1};
module_param_array(video_nr, short, NULL, 0444);
MODULE_PARM_DESC(video_nr,
- "\n<-1|n[,...]> Specify V4L2 minor mode number."
- "\n -1 = use next available (default)"
- "\n n = use minor number n (integer >= 0)"
- "\nYou can specify up to "
- __MODULE_STRING(ET61X251_MAX_DEVICES) " cameras this way."
- "\nFor example:"
- "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
- "\nthe second registered camera and use auto for the first"
- "\none and for every other camera."
- "\n");
+ "\n<-1|n[,...]> Specify V4L2 minor mode number."
+ "\n -1 = use next available (default)"
+ "\n n = use minor number n (integer >= 0)"
+ "\nYou can specify up to "
+ __MODULE_STRING(ET61X251_MAX_DEVICES) " cameras this way."
+ "\nFor example:"
+ "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+ "\nthe second registered camera and use auto for the first"
+ "\none and for every other camera."
+ "\n");
static short force_munmap[] = {[0 ... ET61X251_MAX_DEVICES-1] =
- ET61X251_FORCE_MUNMAP};
+ ET61X251_FORCE_MUNMAP};
module_param_array(force_munmap, bool, NULL, 0444);
MODULE_PARM_DESC(force_munmap,
- "\n<0|1[,...]> Force the application to unmap previously"
- "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
- "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
- "\nthis feature. This parameter is specific for each"
- "\ndetected camera."
- "\n 0 = do not force memory unmapping"
- "\n 1 = force memory unmapping (save memory)"
- "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
- "\n");
+ "\n<0|1[,...]> Force the application to unmap previously"
+ "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+ "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+ "\nthis feature. This parameter is specific for each"
+ "\ndetected camera."
+ "\n 0 = do not force memory unmapping"
+ "\n 1 = force memory unmapping (save memory)"
+ "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+ "\n");
static unsigned int frame_timeout[] = {[0 ... ET61X251_MAX_DEVICES-1] =
- ET61X251_FRAME_TIMEOUT};
+ ET61X251_FRAME_TIMEOUT};
module_param_array(frame_timeout, uint, NULL, 0644);
MODULE_PARM_DESC(frame_timeout,
- "\n<n[,...]> Timeout for a video frame in seconds."
- "\nThis parameter is specific for each detected camera."
- "\nDefault value is "
- __MODULE_STRING(ET61X251_FRAME_TIMEOUT)"."
- "\n");
+ "\n<n[,...]> Timeout for a video frame in seconds."
+ "\nThis parameter is specific for each detected camera."
+ "\nDefault value is "
+ __MODULE_STRING(ET61X251_FRAME_TIMEOUT)"."
+ "\n");
#ifdef ET61X251_DEBUG
static unsigned short debug = ET61X251_DEBUG_LEVEL;
module_param(debug, ushort, 0644);
MODULE_PARM_DESC(debug,
- "\n<n> Debugging information level, from 0 to 3:"
- "\n0 = none (use carefully)"
- "\n1 = critical errors"
- "\n2 = significant informations"
- "\n3 = more verbose messages"
- "\nLevel 3 is useful for testing only, when only "
- "one device is used."
- "\nDefault value is "__MODULE_STRING(ET61X251_DEBUG_LEVEL)"."
- "\n");
+ "\n<n> Debugging information level, from 0 to 3:"
+ "\n0 = none (use carefully)"
+ "\n1 = critical errors"
+ "\n2 = significant informations"
+ "\n3 = more verbose messages"
+ "\nLevel 3 is useful for testing only, when only "
+ "one device is used."
+ "\nDefault value is "__MODULE_STRING(ET61X251_DEBUG_LEVEL)"."
+ "\n");
#endif
/*****************************************************************************/
static u32
et61x251_request_buffers(struct et61x251_device* cam, u32 count,
- enum et61x251_io_method io)
+ enum et61x251_io_method io)
{
struct v4l2_pix_format* p = &(cam->sensor.pix_format);
struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
const size_t imagesize = cam->module_param.force_munmap ||
- io == IO_READ ?
- (p->width * p->height * p->priv) / 8 :
- (r->width * r->height * p->priv) / 8;
+ io == IO_READ ?
+ (p->width * p->height * p->priv) / 8 :
+ (r->width * r->height * p->priv) / 8;
void* buff = NULL;
u32 i;
@@ -216,7 +216,7 @@
*buff = value;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
- 0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+ 0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
if (res < 0) {
DBG(3, "Failed to write a register (value 0x%02X, index "
"0x%02X, error %d)", value, index, res);
@@ -234,7 +234,7 @@
int res;
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
- 0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+ 0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
if (res < 0)
DBG(3, "Failed to read a register (index 0x%02X, error %d)",
index, res);
@@ -269,7 +269,7 @@
int
et61x251_i2c_try_read(struct et61x251_device* cam,
- struct et61x251_sensor* sensor, u8 address)
+ struct et61x251_sensor* sensor, u8 address)
{
struct usb_device* udev = cam->usbdev;
u8* data = cam->control_buffer;
@@ -280,14 +280,14 @@
data[2] = cam->sensor.rsta | 0x10;
data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02);
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
- 0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT);
+ 0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT);
if (res < 0)
err += res;
err += et61x251_i2c_wait(cam, sensor);
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
- 0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT);
+ 0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT);
if (res < 0)
err += res;
@@ -302,7 +302,7 @@
int
et61x251_i2c_try_write(struct et61x251_device* cam,
- struct et61x251_sensor* sensor, u8 address, u8 value)
+ struct et61x251_sensor* sensor, u8 address, u8 value)
{
struct usb_device* udev = cam->usbdev;
u8* data = cam->control_buffer;
@@ -312,13 +312,13 @@
data[1] = cam->sensor.i2c_slave_id;
data[2] = cam->sensor.rsta | 0x12;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
- 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+ 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
if (res < 0)
err += res;
data[0] = value;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
- 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+ 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
if (res < 0)
err += res;
@@ -335,8 +335,8 @@
int
et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2,
- u8 data3, u8 data4, u8 data5, u8 data6, u8 data7,
- u8 data8, u8 address)
+ u8 data3, u8 data4, u8 data5, u8 data6, u8 data7,
+ u8 data8, u8 address)
{
struct usb_device* udev = cam->usbdev;
u8* data = cam->control_buffer;
@@ -350,7 +350,7 @@
data[5] = data7;
data[6] = data8;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
- 0, 0x81, data, n-1, ET61X251_CTRL_TIMEOUT);
+ 0, 0x81, data, n-1, ET61X251_CTRL_TIMEOUT);
if (res < 0)
err += res;
@@ -358,14 +358,14 @@
data[1] = cam->sensor.i2c_slave_id;
data[2] = cam->sensor.rsta | 0x02 | (n << 4);
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
- 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+ 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
if (res < 0)
err += res;
/* Start writing through the serial interface */
data[0] = data1;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
- 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+ 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
if (res < 0)
err += res;
@@ -432,11 +432,11 @@
if (!(*f))
(*f) = list_entry(cam->inqueue.next, struct et61x251_frame_t,
- frame);
+ frame);
imagesize = (cam->sensor.pix_format.width *
- cam->sensor.pix_format.height *
- cam->sensor.pix_format.priv) / 8;
+ cam->sensor.pix_format.height *
+ cam->sensor.pix_format.priv) / 8;
for (i = 0; i < urb->number_of_packets; i++) {
unsigned int len, status;
@@ -476,7 +476,7 @@
if ((*f)->state == F_GRABBING) {
if (sof && (*f)->buf.bytesused) {
if (cam->sensor.pix_format.pixelformat ==
- V4L2_PIX_FMT_ET61X251)
+ V4L2_PIX_FMT_ET61X251)
goto end_of_frame;
else {
DBG(3, "Not expected SOF detected "
@@ -508,8 +508,8 @@
list_move_tail(&(*f)->frame, &cam->outqueue);
if (!list_empty(&cam->inqueue))
(*f) = list_entry(cam->inqueue.next,
- struct et61x251_frame_t,
- frame);
+ struct et61x251_frame_t,
+ frame);
else
(*f) = NULL;
spin_unlock(&cam->queue_lock);
@@ -521,7 +521,7 @@
if (sof &&
cam->sensor.pix_format.pixelformat ==
- V4L2_PIX_FMT_ET61X251)
+ V4L2_PIX_FMT_ET61X251)
goto start_of_frame;
}
}
@@ -544,15 +544,15 @@
struct usb_device *udev = cam->usbdev;
struct urb* urb;
const unsigned int wMaxPacketSize[] = {0, 256, 384, 512, 640, 768, 832,
- 864, 896, 920, 956, 980, 1000,
- 1022};
+ 864, 896, 920, 956, 980, 1000,
+ 1022};
const unsigned int psz = wMaxPacketSize[ET61X251_ALTERNATE_SETTING];
s8 i, j;
int err = 0;
for (i = 0; i < ET61X251_URBS; i++) {
cam->transfer_buffer[i] = kzalloc(ET61X251_ISO_PACKETS * psz,
- GFP_KERNEL);
+ GFP_KERNEL);
if (!cam->transfer_buffer[i]) {
err = -ENOMEM;
DBG(1, "Not enough memory");
@@ -653,9 +653,9 @@
cam->stream = STREAM_INTERRUPT;
timeout = wait_event_timeout(cam->wait_stream,
- (cam->stream == STREAM_OFF) ||
- (cam->state & DEV_DISCONNECTED),
- ET61X251_URB_TIMEOUT);
+ (cam->stream == STREAM_OFF) ||
+ (cam->state & DEV_DISCONNECTED),
+ ET61X251_URB_TIMEOUT);
if (cam->state & DEV_DISCONNECTED)
return -ENODEV;
else if (cam->stream != STREAM_OFF) {
@@ -699,7 +699,7 @@
/*
NOTE 1: being inside one of the following methods implies that the v4l
- device exists for sure (see kobjects and reference counters)
+ device exists for sure (see kobjects and reference counters)
NOTE 2: buffers are PAGE_SIZE long
*/
@@ -964,13 +964,13 @@
static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
- et61x251_show_reg, et61x251_store_reg);
+ et61x251_show_reg, et61x251_store_reg);
static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
- et61x251_show_val, et61x251_store_val);
+ et61x251_show_val, et61x251_store_val);
static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
- et61x251_show_i2c_reg, et61x251_store_i2c_reg);
+ et61x251_show_i2c_reg, et61x251_store_i2c_reg);
static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
- et61x251_show_i2c_val, et61x251_store_i2c_val);
+ et61x251_show_i2c_val, et61x251_store_i2c_val);
static void et61x251_create_sysfs(struct et61x251_device* cam)
@@ -990,7 +990,7 @@
static int
et61x251_set_pix_format(struct et61x251_device* cam,
- struct v4l2_pix_format* pix)
+ struct v4l2_pix_format* pix)
{
int r, err = 0;
@@ -1007,7 +1007,7 @@
static int
et61x251_set_compression(struct et61x251_device* cam,
- struct v4l2_jpegcompression* compression)
+ struct v4l2_jpegcompression* compression)
{
int r, err = 0;
@@ -1049,9 +1049,9 @@
{
struct et61x251_sensor* s = &cam->sensor;
u16 fmw_sx = (u16)(rect->left - s->cropcap.bounds.left +
- s->active_pixel.left),
+ s->active_pixel.left),
fmw_sy = (u16)(rect->top - s->cropcap.bounds.top +
- s->active_pixel.top),
+ s->active_pixel.top),
fmw_length = (u16)(rect->width),
fmw_height = (u16)(rect->height);
int err = 0;
@@ -1061,8 +1061,8 @@
err += et61x251_write_reg(cam, fmw_length & 0xff, 0x6b);
err += et61x251_write_reg(cam, fmw_height & 0xff, 0x6c);
err += et61x251_write_reg(cam, (fmw_sx >> 8) | ((fmw_sy & 0x300) >> 6)
- | ((fmw_length & 0x300) >> 4)
- | ((fmw_height & 0x300) >> 2), 0x6d);
+ | ((fmw_length & 0x300) >> 4)
+ | ((fmw_height & 0x300) >> 2), 0x6d);
if (err)
return -EIO;
@@ -1203,8 +1203,8 @@
}
mutex_unlock(&cam->dev_mutex);
err = wait_event_interruptible_exclusive(cam->open,
- cam->state & DEV_DISCONNECTED
- || !cam->users);
+ cam->state & DEV_DISCONNECTED
+ || !cam->users);
if (err) {
up_read(&et61x251_disconnect);
return err;
@@ -1277,7 +1277,7 @@
static ssize_t
et61x251_read(struct file* filp, char __user * buf,
- size_t count, loff_t* f_pos)
+ size_t count, loff_t* f_pos)
{
struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
struct et61x251_frame_t* f, * i;
@@ -1310,7 +1310,7 @@
if (cam->io == IO_NONE) {
if (!et61x251_request_buffers(cam, cam->nreadbuffers,
- IO_READ)) {
+ IO_READ)) {
DBG(1, "read() failed, not enough memory");
mutex_unlock(&cam->fileop_mutex);
return -ENOMEM;
@@ -1336,12 +1336,12 @@
return -EAGAIN;
}
timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- cam->module_param.frame_timeout *
- 1000 * msecs_to_jiffies(1) );
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED),
+ cam->module_param.frame_timeout *
+ 1000 * msecs_to_jiffies(1) );
if (timeout < 0) {
mutex_unlock(&cam->fileop_mutex);
return timeout;
@@ -1408,7 +1408,7 @@
if (cam->io == IO_NONE) {
if (!et61x251_request_buffers(cam, cam->nreadbuffers,
- IO_READ)) {
+ IO_READ)) {
DBG(1, "poll() failed, not enough memory");
goto error;
}
@@ -1465,7 +1465,7 @@
{
struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
unsigned long size = vma->vm_end - vma->vm_start,
- start = vma->vm_start;
+ start = vma->vm_start;
void *pos;
u32 i;
@@ -1533,13 +1533,13 @@
.driver = "et61x251",
.version = ET61X251_MODULE_VERSION_CODE,
.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
+ V4L2_CAP_STREAMING,
};
strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
- sizeof(cap.bus_info));
+ sizeof(cap.bus_info));
if (copy_to_user(arg, &cap, sizeof(cap)))
return -EFAULT;
@@ -1871,7 +1871,7 @@
return -EINVAL;
pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_ET61X251)
- ? 0 : (pfmt->width * pfmt->priv) / 8;
+ ? 0 : (pfmt->width * pfmt->priv) / 8;
pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
pfmt->field = V4L2_FIELD_NONE;
memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
@@ -1885,7 +1885,7 @@
static int
et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
- void __user * arg)
+ void __user * arg)
{
struct et61x251_sensor* s = &cam->sensor;
struct v4l2_format format;
@@ -1947,7 +1947,7 @@
pix->priv = pfmt->priv; /* bpp */
pix->colorspace = pfmt->colorspace;
pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_ET61X251)
- ? 0 : (pix->width * pix->priv) / 8;
+ ? 0 : (pix->width * pix->priv) / 8;
pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
pix->field = V4L2_FIELD_NONE;
@@ -2020,7 +2020,7 @@
et61x251_vidioc_g_jpegcomp(struct et61x251_device* cam, void __user * arg)
{
if (copy_to_user(arg, &cam->compression,
- sizeof(cam->compression)))
+ sizeof(cam->compression)))
return -EFAULT;
return 0;
@@ -2169,7 +2169,7 @@
static int
et61x251_vidioc_dqbuf(struct et61x251_device* cam, struct file* filp,
- void __user * arg)
+ void __user * arg)
{
struct v4l2_buffer b;
struct et61x251_frame_t *f;
@@ -2188,12 +2188,12 @@
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- cam->module_param.frame_timeout *
- 1000 * msecs_to_jiffies(1) );
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED),
+ cam->module_param.frame_timeout *
+ 1000 * msecs_to_jiffies(1) );
if (timeout < 0)
return timeout;
if (cam->state & DEV_DISCONNECTED)
@@ -2317,7 +2317,7 @@
static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp,
- unsigned int cmd, void __user * arg)
+ unsigned int cmd, void __user * arg)
{
struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
@@ -2411,7 +2411,7 @@
static int et61x251_ioctl(struct inode* inode, struct file* filp,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg)
{
struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
int err = 0;
@@ -2518,7 +2518,7 @@
mutex_lock(&cam->dev_mutex);
err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
- video_nr[dev_nr]);
+ video_nr[dev_nr]);
if (err) {
DBG(1, "V4L2 device registration failed");
if (err == -ENFILE && video_nr[dev_nr] == -1)
diff --git a/drivers/media/video/et61x251/et61x251_sensor.h b/drivers/media/video/et61x251/et61x251_sensor.h
index 56841ae..65edd08 100644
--- a/drivers/media/video/et61x251/et61x251_sensor.h
+++ b/drivers/media/video/et61x251/et61x251_sensor.h
@@ -47,7 +47,7 @@
extern void
et61x251_attach_sensor(struct et61x251_device* cam,
- struct et61x251_sensor* sensor);
+ struct et61x251_sensor* sensor);
/*****************************************************************************/
@@ -56,13 +56,13 @@
extern int et61x251_i2c_write(struct et61x251_device*, u8 address, u8 value);
extern int et61x251_i2c_read(struct et61x251_device*, u8 address);
extern int et61x251_i2c_try_write(struct et61x251_device*,
- struct et61x251_sensor*, u8 address,
- u8 value);
+ struct et61x251_sensor*, u8 address,
+ u8 value);
extern int et61x251_i2c_try_read(struct et61x251_device*,
- struct et61x251_sensor*, u8 address);
+ struct et61x251_sensor*, u8 address);
extern int et61x251_i2c_raw_write(struct et61x251_device*, u8 n, u8 data1,
- u8 data2, u8 data3, u8 data4, u8 data5,
- u8 data6, u8 data7, u8 data8, u8 address);
+ u8 data2, u8 data3, u8 data4, u8 data5,
+ u8 data6, u8 data7, u8 data8, u8 address);
/*****************************************************************************/
@@ -100,13 +100,13 @@
int (*init)(struct et61x251_device* cam);
int (*get_ctrl)(struct et61x251_device* cam,
- struct v4l2_control* ctrl);
+ struct v4l2_control* ctrl);
int (*set_ctrl)(struct et61x251_device* cam,
- const struct v4l2_control* ctrl);
+ const struct v4l2_control* ctrl);
int (*set_crop)(struct et61x251_device* cam,
- const struct v4l2_rect* rect);
+ const struct v4l2_rect* rect);
int (*set_pix_format)(struct et61x251_device* cam,
- const struct v4l2_pix_format* pix);
+ const struct v4l2_pix_format* pix);
/* Private */
struct v4l2_queryctrl _qctrl[ET61X251_MAX_CTRLS];
diff --git a/drivers/media/video/et61x251/et61x251_tas5130d1b.c b/drivers/media/video/et61x251/et61x251_tas5130d1b.c
index 3998d76..a7d65b8 100644
--- a/drivers/media/video/et61x251/et61x251_tas5130d1b.c
+++ b/drivers/media/video/et61x251/et61x251_tas5130d1b.c
@@ -46,20 +46,20 @@
static int tas5130d1b_set_ctrl(struct et61x251_device* cam,
- const struct v4l2_control* ctrl)
+ const struct v4l2_control* ctrl)
{
int err = 0;
switch (ctrl->id) {
case V4L2_CID_GAIN:
err += et61x251_i2c_raw_write(cam, 2, 0x20,
- 0xf6-ctrl->value, 0, 0, 0,
- 0, 0, 0, 0);
+ 0xf6-ctrl->value, 0, 0, 0,
+ 0, 0, 0, 0);
break;
case V4L2_CID_EXPOSURE:
err += et61x251_i2c_raw_write(cam, 2, 0x40,
- 0x47-ctrl->value, 0, 0, 0,
- 0, 0, 0, 0);
+ 0x47-ctrl->value, 0, 0, 0,
+ 0, 0, 0, 0);
break;
default:
return -EINVAL;
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index da44579..fdc8e3f 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -15,7 +15,7 @@
*
* Based on the Linux CPiA driver written by Peter Pregler,
* Scott J. Bertin and Johannes Erdfelt.
- *
+ *
* Please see the file: Documentation/usb/ov511.txt
* and the website at: http://alpha.dyndns.org/ov511
* for more info.
@@ -433,7 +433,7 @@
return (reg_w(ov, reg, newval));
}
-/*
+/*
* Writes multiple (n) byte value to a single register. Only valid with certain
* registers (0x30 and 0xc4 - 0xce).
*/
@@ -629,7 +629,7 @@
/* Retry until idle */
do
rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ while (rc > 0 && ((rc&1) == 0));
if (rc < 0)
break;
@@ -1752,7 +1752,7 @@
ov->whiteness = p->whiteness;
/* Don't return error if a setting is unsupported, or rest of settings
- * will not be performed */
+ * will not be performed */
rc = sensor_set_contrast(ov, p->contrast);
if (FATAL_ERROR(rc))
@@ -1781,7 +1781,7 @@
PDEBUG(4, "sensor_get_picture");
/* Don't return error if a setting is unsupported, or rest of settings
- * will not be performed */
+ * will not be performed */
rc = sensor_get_contrast(ov, &(p->contrast));
if (FATAL_ERROR(rc))
@@ -2251,7 +2251,7 @@
/******** Clock programming ********/
- /* The OV6620 needs special handling. This prevents the
+ /* The OV6620 needs special handling. This prevents the
* severe banding that normally occurs */
if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630)
{
@@ -2326,7 +2326,7 @@
int sub_flag)
{
int ret;
- int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize;
+ int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize;
int hoffset, voffset, hwscale = 0, vwscale = 0;
/* The different sensor ICs handle setting up of window differently.
@@ -2575,7 +2575,7 @@
/* OV518 needs U and V swapped */
i2c_w_mask(ov, 0x15, 0x00, 0x01);
- if (mode == VIDEO_PALETTE_GREY) {
+ if (mode == VIDEO_PALETTE_GREY) {
/* Set 16-bit input format (UV data are ignored) */
reg_w_mask(ov, 0x20, 0x00, 0x08);
@@ -2894,7 +2894,7 @@
* ... ... ...
* 56 57 ... 63 120 121 ... 127 248 249 ... 255
*
- */
+ */
static void
yuv400raw_to_yuv400p(struct ov511_frame *frame,
unsigned char *pIn0, unsigned char *pOut0)
@@ -2923,7 +2923,7 @@
*
* 0 1 ... 7
* 8 9 ... 15
- * ...
+ * ...
* 56 57 ... 63
*
* U and V are shipped at half resolution (1 U,V sample -> one 2x2 block).
@@ -3034,7 +3034,7 @@
*/
static void
deinterlace(struct ov511_frame *frame, int rawformat,
- unsigned char *pIn0, unsigned char *pOut0)
+ unsigned char *pIn0, unsigned char *pOut0)
{
const int fieldheight = frame->rawheight / 2;
const int fieldpix = fieldheight * frame->rawwidth;
@@ -3112,7 +3112,7 @@
frame->tempdata);
deinterlace(frame, RAWFMT_YUV400, frame->tempdata,
- frame->data);
+ frame->data);
} else {
if (frame->compressed)
decompress(ov, frame, frame->rawdata,
@@ -3136,7 +3136,7 @@
frame->tempdata);
deinterlace(frame, RAWFMT_YUV420, frame->tempdata,
- frame->data);
+ frame->data);
} else {
if (frame->compressed)
decompress(ov, frame, frame->rawdata, frame->data);
@@ -3226,7 +3226,7 @@
frame->rawwidth = ((int)(in[9]) + 1) * 8;
frame->rawheight = ((int)(in[10]) + 1) * 8;
- PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d",
+ PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d",
ov->curframe, pnum, frame->rawwidth, frame->rawheight,
frame->bytes_recvd);
@@ -3527,10 +3527,10 @@
return;
}
- if (urb->status == -ENOENT || urb->status == -ECONNRESET) {
- PDEBUG(4, "URB unlinked");
- return;
- }
+ if (urb->status == -ENOENT || urb->status == -ECONNRESET) {
+ PDEBUG(4, "URB unlinked");
+ return;
+ }
if (urb->status != -EINPROGRESS && urb->status != 0) {
err("ERROR: urb->status=%d: %s", urb->status,
@@ -4627,8 +4627,8 @@
PDEBUG(4, "mmap: %ld (%lX) bytes", size, size);
if (size > (((OV511_NUMFRAMES
- * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)
- + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))))
+ * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)
+ + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))))
return -EINVAL;
if (mutex_lock_interruptible(&ov->lock))
@@ -5062,7 +5062,7 @@
}
/* This initializes the KS0127 and KS0127B video decoders. */
-static int
+static int
ks0127_configure(struct usb_ov511 *ov)
{
int rc;
@@ -5193,7 +5193,7 @@
return -1;
/* Detect version of decoder. This must be done after writing the
- * initial regs or the decoder will lock up. */
+ * initial regs or the decoder will lock up. */
rc = i2c_r(ov, 0x00);
if (rc < 0) {
@@ -5216,13 +5216,13 @@
}
/* This initializes the OV511/OV511+ and the sensor */
-static int
+static int
ov511_configure(struct usb_ov511 *ov)
{
static struct ov511_regvals aRegvalsInit511[] = {
{ OV511_REG_BUS, R51x_SYS_RESET, 0x7f },
- { OV511_REG_BUS, R51x_SYS_INIT, 0x01 },
- { OV511_REG_BUS, R51x_SYS_RESET, 0x7f },
+ { OV511_REG_BUS, R51x_SYS_INIT, 0x01 },
+ { OV511_REG_BUS, R51x_SYS_RESET, 0x7f },
{ OV511_REG_BUS, R51x_SYS_INIT, 0x01 },
{ OV511_REG_BUS, R51x_SYS_RESET, 0x3f },
{ OV511_REG_BUS, R51x_SYS_INIT, 0x01 },
@@ -5269,7 +5269,7 @@
err("Please notify " EMAIL " of the name,");
err("manufacturer, model, and this number of your camera.");
err("Also include the output of the detection process.");
- }
+ }
if (ov->customid == 70) /* USB Life TV (PAL/SECAM) */
ov->pal = 1;
@@ -5336,17 +5336,17 @@
if (i2c_w(ov, 0x10, 0x00) < 0) {
err("Can't determine sensor slave IDs");
- goto error;
+ goto error;
} else {
if (ks0127_configure(ov) < 0) {
err("Failed to configure KS0127");
- goto error;
+ goto error;
}
}
} else {
if (saa7111a_configure(ov) < 0) {
err("Failed to configure SAA7111A");
- goto error;
+ goto error;
}
}
} else {
@@ -5356,13 +5356,13 @@
} else {
if (ov6xx0_configure(ov) < 0) {
err("Failed to configure OV6xx0");
- goto error;
+ goto error;
}
}
} else {
if (ov7xx0_configure(ov) < 0) {
err("Failed to configure OV7xx0");
- goto error;
+ goto error;
}
}
@@ -5381,12 +5381,12 @@
/* For 518 and 518+ */
static struct ov511_regvals aRegvalsInit518[] = {
{ OV511_REG_BUS, R51x_SYS_RESET, 0x40 },
- { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 },
- { OV511_REG_BUS, R51x_SYS_RESET, 0x3e },
+ { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 },
+ { OV511_REG_BUS, R51x_SYS_RESET, 0x3e },
{ OV511_REG_BUS, R51x_SYS_INIT, 0xe1 },
{ OV511_REG_BUS, R51x_SYS_RESET, 0x00 },
{ OV511_REG_BUS, R51x_SYS_INIT, 0xe1 },
- { OV511_REG_BUS, 0x46, 0x00 },
+ { OV511_REG_BUS, 0x46, 0x00 },
{ OV511_REG_BUS, 0x5d, 0x03 },
{ OV511_DONE_BUS, 0x0, 0x00},
};
@@ -5517,7 +5517,7 @@
if (init_ov_sensor(ov) < 0) {
err("Can't determine sensor slave IDs");
- goto error;
+ goto error;
} else {
err("Detected unsupported OV8xx0 sensor");
goto error;
@@ -5525,13 +5525,13 @@
} else {
if (ov6xx0_configure(ov) < 0) {
err("Failed to configure OV6xx0");
- goto error;
+ goto error;
}
}
} else {
if (ov7xx0_configure(ov) < 0) {
err("Failed to configure OV7xx0");
- goto error;
+ goto error;
}
}
@@ -5564,28 +5564,28 @@
{
struct usb_ov511 *ov = cd_to_ov(cd);
return sprintf(buf, "%d\n", ov->customid);
-}
+}
static CLASS_DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL);
static ssize_t show_model(struct class_device *cd, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
return sprintf(buf, "%s\n", ov->desc);
-}
+}
static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
static ssize_t show_bridge(struct class_device *cd, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
return sprintf(buf, "%s\n", symbolic(brglist, ov->bridge));
-}
+}
static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL);
static ssize_t show_sensor(struct class_device *cd, char *buf)
{
struct usb_ov511 *ov = cd_to_ov(cd);
return sprintf(buf, "%s\n", symbolic(senlist, ov->sensor));
-}
+}
static CLASS_DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL);
static ssize_t show_brightness(struct class_device *cd, char *buf)
@@ -5597,7 +5597,7 @@
return -ENODEV;
sensor_get_brightness(ov, &x);
return sprintf(buf, "%d\n", x >> 8);
-}
+}
static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL);
static ssize_t show_saturation(struct class_device *cd, char *buf)
@@ -5609,7 +5609,7 @@
return -ENODEV;
sensor_get_saturation(ov, &x);
return sprintf(buf, "%d\n", x >> 8);
-}
+}
static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL);
static ssize_t show_contrast(struct class_device *cd, char *buf)
@@ -5621,7 +5621,7 @@
return -ENODEV;
sensor_get_contrast(ov, &x);
return sprintf(buf, "%d\n", x >> 8);
-}
+}
static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL);
static ssize_t show_hue(struct class_device *cd, char *buf)
@@ -5633,7 +5633,7 @@
return -ENODEV;
sensor_get_hue(ov, &x);
return sprintf(buf, "%d\n", x >> 8);
-}
+}
static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL);
static ssize_t show_exposure(struct class_device *cd, char *buf)
@@ -5645,7 +5645,7 @@
return -ENODEV;
sensor_get_exposure(ov, &exp);
return sprintf(buf, "%d\n", exp >> 8);
-}
+}
static CLASS_DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL);
static void ov_create_sysfs(struct video_device *vdev)
diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h
index bce9b36..12b3d51 100644
--- a/drivers/media/video/ov511.h
+++ b/drivers/media/video/ov511.h
@@ -130,7 +130,7 @@
#define R511_COMP_QVY 0x76
#define R511_COMP_QVUV 0x77
#define R511_COMP_EN 0x78
-#define R511_COMP_LUT_EN 0x79
+#define R511_COMP_LUT_EN 0x79
#define R511_COMP_LUT_BEGIN 0x80
/* --------------------------------- */
@@ -459,14 +459,14 @@
int subh; /* Pix Array subcapture height */
int curframe; /* Current receiving sbuf */
- struct ov511_frame frame[OV511_NUMFRAMES];
+ struct ov511_frame frame[OV511_NUMFRAMES];
struct ov511_sbuf sbuf[OV511_NUMSBUF];
wait_queue_head_t wq; /* Processes waiting */
int snap_enabled; /* Snapshot mode enabled */
-
+
int bridge; /* Type of bridge (BRG_*) */
int bclass; /* Class of bridge (BCL_*) */
int sensor; /* Type of image sensor chip (SEN_*) */
@@ -512,7 +512,7 @@
/* Returns the name of the matching element in the symbolic_list array. The
* end of the list must be marked with an element that has a NULL name.
*/
-static inline char *
+static inline char *
symbolic(struct symbolic_list list[], int num)
{
int i;
diff --git a/drivers/media/video/ovcamchip/Makefile b/drivers/media/video/ovcamchip/Makefile
index bca41ad..cba4cdf 100644
--- a/drivers/media/video/ovcamchip/Makefile
+++ b/drivers/media/video/ovcamchip/Makefile
@@ -1,4 +1,4 @@
ovcamchip-objs := ovcamchip_core.o ov6x20.o ov6x30.o ov7x10.o ov7x20.o \
- ov76be.o
+ ov76be.o
obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip.o
diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c
index e76b53d..3fe9fa0 100644
--- a/drivers/media/video/ovcamchip/ovcamchip_core.c
+++ b/drivers/media/video/ovcamchip/ovcamchip_core.c
@@ -266,17 +266,17 @@
PDEBUG(3, "Testing for 0V6xx0");
c->addr = OV6xx0_SID;
if (init_camchip(c) < 0) {
- return -ENODEV;
+ return -ENODEV;
} else {
if (ov6xx0_detect(c) < 0) {
PERROR("Failed to init OV6xx0");
- return -EIO;
+ return -EIO;
}
}
} else {
if (ov7xx0_detect(c) < 0) {
PERROR("Failed to init OV7xx0");
- return -EIO;
+ return -EIO;
}
}
diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h
index 575e612..1231335 100644
--- a/drivers/media/video/ovcamchip/ovcamchip_priv.h
+++ b/drivers/media/video/ovcamchip/ovcamchip_priv.h
@@ -82,6 +82,6 @@
struct ovcamchip_regvals *rvals);
extern int ov_write_mask(struct i2c_client *c, unsigned char reg,
- unsigned char value, unsigned char mask);
+ unsigned char value, unsigned char mask);
#endif
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
index 15fd85a..522e9dd 100644
--- a/drivers/media/video/planb.c
+++ b/drivers/media/video/planb.c
@@ -1,4 +1,4 @@
-/*
+/*
planb - PlanB frame grabber driver
PlanB is used in the 7x00/8x00 series of PowerMacintosh
@@ -584,7 +584,7 @@
wake_up_interruptible(&pb->suspendq);
}
-static void add_clip(struct planb *pb, struct video_clip *clip)
+static void add_clip(struct planb *pb, struct video_clip *clip)
{
volatile unsigned char *base;
int xc = clip->x, yc = clip->y;
@@ -758,7 +758,7 @@
PLANB_SET(CH_SYNC));
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
PLANB_SET(DMA_ABORT));
-
+
/* odd field data: */
jump = virt_to_bus(c1 + nlines / 2);
for (i=1; i < nlines; i += stepsize, c1++)
@@ -1247,7 +1247,7 @@
tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++;
tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel),
PLANB_SET(DMA_ABORT));
-
+
/* odd field data: */
jump_addr = c1 + TAB_FACTOR * nlines / 2;
jump = virt_to_bus(jump_addr);
@@ -1383,7 +1383,7 @@
pb->user++;
DEBUG("PlanB: device opened\n");
- return 0;
+ return 0;
}
static void planb_close(struct video_device *dev)
@@ -1424,9 +1424,9 @@
static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
{
struct planb *pb=(struct planb *)dev;
-
+
switch (cmd)
- {
+ {
case VIDIOCGCAP:
{
struct video_capability b;
@@ -1440,26 +1440,26 @@
b.channels = 2; /* composite & svhs */
b.audios = 0;
b.maxwidth = PLANB_MAXPIXELS;
- b.maxheight = PLANB_MAXLINES;
- b.minwidth = 32; /* wild guess */
- b.minheight = 32;
- if (copy_to_user(arg,&b,sizeof(b)))
- return -EFAULT;
+ b.maxheight = PLANB_MAXLINES;
+ b.minwidth = 32; /* wild guess */
+ b.minheight = 32;
+ if (copy_to_user(arg,&b,sizeof(b)))
+ return -EFAULT;
return 0;
}
case VIDIOCSFBUF:
{
- struct video_buffer v;
+ struct video_buffer v;
unsigned short bpp;
unsigned int fmt;
DEBUG("PlanB: IOCTL VIDIOCSFBUF\n");
- if (!capable(CAP_SYS_ADMIN)
+ if (!capable(CAP_SYS_ADMIN)
|| !capable(CAP_SYS_RAWIO))
- return -EPERM;
- if (copy_from_user(&v, arg,sizeof(v)))
- return -EFAULT;
+ return -EPERM;
+ if (copy_from_user(&v, arg,sizeof(v)))
+ return -EFAULT;
planb_lock(pb);
switch(v.depth) {
case 8:
@@ -1478,7 +1478,7 @@
break;
default:
planb_unlock(pb);
- return -EINVAL;
+ return -EINVAL;
}
if (bpp * v.width > v.bytesperline) {
planb_unlock(pb);
@@ -1493,7 +1493,7 @@
pb->win.bpl = pb->win.bpp * pb->win.swidth;
pb->win.pad = v.bytesperline - pb->win.bpl;
- DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d,"
+ DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d,"
" bpl %d (+ %d)\n", v.base, v.width,v.height,
pb->win.bpp, pb->win.bpl, pb->win.pad);
@@ -1504,11 +1504,11 @@
resume_overlay(pb);
}
planb_unlock(pb);
- return 0;
+ return 0;
}
case VIDIOCGFBUF:
{
- struct video_buffer v;
+ struct video_buffer v;
DEBUG("PlanB: IOCTL VIDIOCGFBUF\n");
@@ -1518,15 +1518,15 @@
v.depth = pb->win.depth;
v.bytesperline = pb->win.bpl + pb->win.pad;
if (copy_to_user(arg, &v, sizeof(v)))
- return -EFAULT;
+ return -EFAULT;
return 0;
}
case VIDIOCCAPTURE:
{
int i;
- if(copy_from_user(&i, arg, sizeof(i)))
- return -EFAULT;
+ if(copy_from_user(&i, arg, sizeof(i)))
+ return -EFAULT;
if(i==0) {
DEBUG("PlanB: IOCTL VIDIOCCAPTURE Stop\n");
@@ -1695,7 +1695,7 @@
struct video_window vw;
struct video_clip clip;
int i;
-
+
DEBUG("PlanB: IOCTL VIDIOCSWIN\n");
if(copy_from_user(&vw,arg,sizeof(vw)))
@@ -1749,7 +1749,7 @@
return -EFAULT;
return 0;
}
- case VIDIOCSYNC: {
+ case VIDIOCSYNC: {
int i;
IDEBUG("PlanB: IOCTL VIDIOCSYNC\n");
@@ -1759,42 +1759,42 @@
IDEBUG("PlanB: sync to frame %d\n", i);
- if(i > (MAX_GBUFFERS - 1) || i < 0)
- return -EINVAL;
+ if(i > (MAX_GBUFFERS - 1) || i < 0)
+ return -EINVAL;
chk_grab:
- switch (pb->frame_stat[i]) {
- case GBUFFER_UNUSED:
- return -EINVAL;
+ switch (pb->frame_stat[i]) {
+ case GBUFFER_UNUSED:
+ return -EINVAL;
case GBUFFER_GRABBING:
IDEBUG("PlanB: waiting for grab"
" done (%d)\n", i);
- interruptible_sleep_on(&pb->capq);
+ interruptible_sleep_on(&pb->capq);
if(signal_pending(current))
return -EINTR;
goto chk_grab;
- case GBUFFER_DONE:
- pb->frame_stat[i] = GBUFFER_UNUSED;
- break;
- }
- return 0;
+ case GBUFFER_DONE:
+ pb->frame_stat[i] = GBUFFER_UNUSED;
+ break;
+ }
+ return 0;
}
- case VIDIOCMCAPTURE:
+ case VIDIOCMCAPTURE:
{
- struct video_mmap vm;
+ struct video_mmap vm;
volatile unsigned int status;
IDEBUG("PlanB: IOCTL VIDIOCMCAPTURE\n");
if(copy_from_user((void *) &vm,(void *)arg,sizeof(vm)))
return -EFAULT;
- status = pb->frame_stat[vm.frame];
- if (status != GBUFFER_UNUSED)
- return -EBUSY;
+ status = pb->frame_stat[vm.frame];
+ if (status != GBUFFER_UNUSED)
+ return -EBUSY;
- return vgrab(pb, &vm);
+ return vgrab(pb, &vm);
}
-
+
case VIDIOCGMBUF:
{
int i;
@@ -1811,7 +1811,7 @@
return -EFAULT;
return 0;
}
-
+
case PLANBIOCGSAAREGS:
{
struct planb_saa_regs preg;
@@ -1828,7 +1828,7 @@
return -EFAULT;
return 0;
}
-
+
case PLANBIOCSSAAREGS:
{
struct planb_saa_regs preg;
@@ -1842,7 +1842,7 @@
saa_set (preg.addr, preg.val, pb);
return 0;
}
-
+
case PLANBIOCGSTAT:
{
struct planb_stat_regs pstat;
@@ -1859,7 +1859,7 @@
return -EFAULT;
return 0;
}
-
+
case PLANBIOCSMODE: {
int v;
@@ -1985,10 +1985,10 @@
{
int i;
struct planb *pb = (struct planb *)dev;
- unsigned long start = (unsigned long)adr;
+ unsigned long start = (unsigned long)adr;
if (size > MAX_GBUFFERS * PLANB_MAX_FBUF)
- return -EINVAL;
+ return -EINVAL;
if (!pb->rawbuf) {
int err;
if((err=grabbuf_alloc(pb)))
@@ -2091,10 +2091,10 @@
/* clear interrupt mask */
pb->intr_mask = PLANB_CLR_IRQ;
- result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb);
- if (result < 0) {
- if (result==-EINVAL)
- printk(KERN_ERR "PlanB: Bad irq number (%d) "
+ result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb);
+ if (result < 0) {
+ if (result==-EINVAL)
+ printk(KERN_ERR "PlanB: Bad irq number (%d) "
"or handler\n", (int)pb->irq);
else if (result==-EBUSY)
printk(KERN_ERR "PlanB: I don't know why, "
@@ -2102,7 +2102,7 @@
return result;
}
disable_irq(pb->irq);
-
+
/* Now add the template and register the device unit. */
memcpy(&pb->video_dev,&planb_template,sizeof(planb_template));
@@ -2143,7 +2143,7 @@
}
/*
- * Scan for a PlanB controller, request the irq and map the io memory
+ * Scan for a PlanB controller, request the irq and map the io memory
*/
static int find_planb(void)
@@ -2171,9 +2171,9 @@
pb = &planbs[0];
planb_num = 1;
- if (planb_devices->n_addrs != 1) {
- printk (KERN_WARNING "PlanB: expecting 1 address for planb "
- "(got %d)", planb_devices->n_addrs);
+ if (planb_devices->n_addrs != 1) {
+ printk (KERN_WARNING "PlanB: expecting 1 address for planb "
+ "(got %d)", planb_devices->n_addrs);
return 0;
}
@@ -2236,7 +2236,7 @@
pb->planb_base = planb_regs;
pb->planb_base_phys = (struct planb_registers *)new_base;
pb->irq = irq;
-
+
return planb_num;
err_out_disable:
@@ -2251,7 +2251,7 @@
int i;
struct planb *pb;
- for (i=0;i<planb_num; i++)
+ for (i=0;i<planb_num; i++)
{
pb=&planbs[i];
@@ -2278,7 +2278,7 @@
static int __init init_planbs(void)
{
int i;
-
+
if (find_planb()<=0)
return -EIO;
@@ -2288,9 +2288,9 @@
" with v4l\n", i);
release_planb();
return -EIO;
- }
+ }
printk(KERN_INFO "PlanB: registered device %d with v4l\n", i);
- }
+ }
return 0;
}
diff --git a/drivers/media/video/planb.h b/drivers/media/video/planb.h
index 79b6b56..9282321 100644
--- a/drivers/media/video/planb.h
+++ b/drivers/media/video/planb.h
@@ -1,4 +1,4 @@
-/*
+/*
planb - PlanB frame grabber driver
PlanB is used in the 7x00/8x00 series of PowerMacintosh
@@ -167,7 +167,7 @@
struct video_device video_dev;
struct video_picture picture; /* Current picture params */
struct video_audio audio_dev; /* Current audio params */
-
+
volatile struct planb_registers *planb_base; /* virt base of planb */
struct planb_registers *planb_base_phys; /* phys base of planb */
void *priv_space; /* Org. alloc. mem for kfree */
@@ -209,7 +209,7 @@
int gwidth[MAX_GBUFFERS], gheight[MAX_GBUFFERS];
unsigned int gfmt[MAX_GBUFFERS];
int gnorm_switch[MAX_GBUFFERS];
- volatile unsigned int *frame_stat;
+ volatile unsigned int *frame_stat;
#define GBUFFER_UNUSED 0x00U
#define GBUFFER_GRABBING 0x01U
#define GBUFFER_DONE 0x02U
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 05ca559..09835ca 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -12,10 +12,10 @@
* Most of this code is directly derived from his userspace driver.
* His driver works so send any reports to alan@redhat.com unless the
* userspace driver also doesn't work for you...
- *
+ *
* Changes:
* 08/07/2003 Daniele Bellucci <bellucda@tiscali.it>
- * - pms_capture: report back -EFAULT
+ * - pms_capture: report back -EFAULT
*/
#include <linux/module.h>
@@ -66,14 +66,14 @@
/*
* I/O ports and Shared Memory
*/
-
+
static int io_port = 0x250;
static int data_port = 0x251;
static int mem_base = 0xC8000;
static void __iomem *mem;
static int video_nr = -1;
-
+
static inline void mvv_write(u8 index, u8 value)
{
@@ -90,9 +90,9 @@
{
int counter;
int i;
-
+
outb(0x28, io_port);
-
+
counter=0;
while((inb(data_port)&0x01)==0)
if(counter++==256)
@@ -101,9 +101,9 @@
while((inb(data_port)&0x01)!=0)
if(counter++==256)
break;
-
+
outb(slave, io_port);
-
+
counter=0;
while((inb(data_port)&0x01)==0)
if(counter++==256)
@@ -112,7 +112,7 @@
while((inb(data_port)&0x01)!=0)
if(counter++==256)
break;
-
+
for(i=0;i<12;i++)
{
char st=inb(data_port);
@@ -122,7 +122,7 @@
break;
}
outb(0x29, io_port);
- return inb(data_port);
+ return inb(data_port);
}
static int pms_i2c_write(u16 slave, u16 sub, u16 data)
@@ -130,19 +130,19 @@
int skip=0;
int count;
int i;
-
+
for(i=0;i<i2c_count;i++)
{
if((i2cinfo[i].slave==slave) &&
(i2cinfo[i].sub == sub))
{
- if(i2cinfo[i].data==data)
- skip=1;
- i2cinfo[i].data=data;
- i=i2c_count+1;
+ if(i2cinfo[i].data==data)
+ skip=1;
+ i2cinfo[i].data=data;
+ i=i2c_count+1;
}
}
-
+
if(i==i2c_count && i2c_count<64)
{
i2cinfo[i2c_count].slave=slave;
@@ -150,16 +150,16 @@
i2cinfo[i2c_count].data=data;
i2c_count++;
}
-
+
if(skip)
return 0;
-
+
mvv_write(0x29, sub);
mvv_write(0x2A, data);
mvv_write(0x28, slave);
-
+
outb(0x28, io_port);
-
+
count=0;
while((inb(data_port)&1)==0)
if(count>255)
@@ -167,9 +167,9 @@
while((inb(data_port)&1)!=0)
if(count>255)
break;
-
+
count=inb(data_port);
-
+
if(count&2)
return -1;
return count;
@@ -189,8 +189,8 @@
static void pms_i2c_andor(int slave, int sub, int and, int or)
{
- u8 tmp;
-
+ u8 tmp;
+
tmp=pms_i2c_read(slave, sub);
tmp = (tmp&and)|or;
pms_i2c_write(slave, sub, tmp);
@@ -199,7 +199,7 @@
/*
* Control functions
*/
-
+
static void pms_videosource(short source)
{
@@ -234,8 +234,8 @@
break;
}
}
-
-
+
+
static void pms_contrast(short contrast)
{
switch(decoder)
@@ -269,14 +269,14 @@
{
int target;
standard = format;
-
+
if(decoder==PHILIPS1)
target=0x42;
else if(decoder==PHILIPS2)
target=0x8A;
else
return;
-
+
switch(format)
{
case 0: /* Auto */
@@ -302,7 +302,7 @@
/*
* These features of the PMS card are not currently exposes. They
- * could become a private v4l ioctl for PMSCONFIG or somesuch if
+ * could become a private v4l ioctl for PMSCONFIG or somesuch if
* people need it. We also don't yet use the PMS interrupt.
*/
@@ -324,7 +324,7 @@
/*
* Bandpass filters
*/
-
+
static void pms_bandpass(short pass)
{
if(decoder==PHILIPS2)
@@ -493,7 +493,7 @@
/*
* Turn 16bit ratios into best small ratio the chipset can grok
*/
-
+
static void pms_vertdeci(unsigned short decinum, unsigned short deciden)
{
/* Knock it down by /5 once */
@@ -546,7 +546,7 @@
decinum=512;
deciden=640; /* 768 would be ideal */
}
-
+
while(((decinum|deciden)&1)==0)
{
decinum>>=1;
@@ -559,7 +559,7 @@
}
if(deciden==32)
deciden--;
-
+
mvv_write(0x24, 0x80|deciden);
mvv_write(0x25, decinum);
}
@@ -567,14 +567,14 @@
static void pms_resolution(short width, short height)
{
int fg_height;
-
+
fg_height=height;
if(fg_height>280)
fg_height=280;
-
+
mvv_write(0x18, fg_height);
mvv_write(0x19, fg_height>>8);
-
+
if(standard==1)
{
mvv_write(0x1A, 0xFC);
@@ -598,7 +598,7 @@
mvv_write(0x42, 0x00);
mvv_write(0x43, 0x00);
mvv_write(0x44, MVVMEMORYWIDTH);
-
+
mvv_write(0x22, width+8);
mvv_write(0x23, (width+8)>> 8);
@@ -618,7 +618,7 @@
/*
* Set Input
*/
-
+
static void pms_vcrinput(short input)
{
if(decoder==PHILIPS2)
@@ -643,20 +643,20 @@
mvv_write(0x08,r8); /* capture rgb555/565, init DRAM, PC enable */
/* printf("%d %d %d %d %d %x %x\n",width,height,voff,nom,den,mvv_buf); */
-
- for (y = 0; y < dev->height; y++ )
+
+ for (y = 0; y < dev->height; y++ )
{
writeb(0, mem); /* synchronisiert neue Zeile */
-
+
/*
* This is in truth a fifo, be very careful as if you
* forgot this odd things will occur 8)
*/
-
+
memcpy_fromio(tmp, mem, dw+32); /* discard 16 word */
cnt -= dev->height;
- while (cnt <= 0)
- {
+ while (cnt <= 0)
+ {
/*
* Don't copy too far
*/
@@ -666,7 +666,7 @@
cnt += dev->height;
if (copy_to_user(buf, tmp+32, dt))
return len ? len : -EFAULT;
- buf += dt;
+ buf += dt;
len += dt;
}
}
@@ -683,7 +683,7 @@
{
struct video_device *dev = video_devdata(file);
struct pms_device *pd=(struct pms_device *)dev;
-
+
switch(cmd)
{
case VIDIOCGCAP:
@@ -806,7 +806,7 @@
||(p->palette==VIDEO_PALETTE_RGB555 && p->depth==15)))
return -EINVAL;
pd->picture= *p;
-
+
/*
* Now load the card.
*/
@@ -815,7 +815,7 @@
pms_brightness(p->brightness>>8);
pms_hue(p->hue>>8);
pms_colour(p->colour>>8);
- pms_contrast(p->contrast>>8);
+ pms_contrast(p->contrast>>8);
mutex_unlock(&pd->lock);
return 0;
}
@@ -873,7 +873,7 @@
struct video_device *v = video_devdata(file);
struct pms_device *pd=(struct pms_device *)v;
int len;
-
+
mutex_lock(&pd->lock);
len=pms_capture(pd, buf, (pd->picture.depth==16)?0:1,count);
mutex_unlock(&pd->lock);
@@ -905,13 +905,13 @@
/*
* Probe for and initialise the Mediavision PMS
*/
-
+
static int init_mediavision(void)
{
int id;
int idec, decst;
int i;
-
+
unsigned char i2c_defs[]={
0x4C,0x30,0x00,0xE8,
0xB6,0xE2,0x00,0x00,
@@ -925,7 +925,7 @@
mem = ioremap(mem_base, 0x800);
if (!mem)
return -ENOMEM;
-
+
if (!request_region(0x9A01, 1, "Mediavision PMS config"))
{
printk(KERN_WARNING "mediavision: unable to detect: 0x9A01 in use.\n");
@@ -941,18 +941,18 @@
}
outb(0xB8, 0x9A01); /* Unlock */
outb(io_port>>4, 0x9A01); /* Set IO port */
-
-
+
+
id=mvv_read(3);
decst=pms_i2c_stat(0x43);
-
+
if(decst!=-1)
idec=2;
else if(pms_i2c_stat(0xb9)!=-1)
idec=3;
else if(pms_i2c_stat(0x8b)!=-1)
idec=1;
- else
+ else
idec=0;
printk(KERN_INFO "PMS type is %d\n", idec);
@@ -966,11 +966,11 @@
/*
* Ok we have a PMS of some sort
*/
-
+
mvv_write(0x04, mem_base>>12); /* Set the memory area */
-
+
/* Ok now load the defaults */
-
+
for(i=0;i<0x19;i++)
{
if(i2c_defs[i]==0xFF)
@@ -978,7 +978,7 @@
else
pms_i2c_write(0x8A, i, i2c_defs[i]);
}
-
+
pms_i2c_write(0xB8,0x00,0x12);
pms_i2c_write(0xB8,0x04,0x00);
pms_i2c_write(0xB8,0x07,0x00);
@@ -987,18 +987,18 @@
pms_i2c_write(0xB8,0x0A,0x00);
pms_i2c_write(0xB8,0x0B,0x10);
pms_i2c_write(0xB8,0x10,0x03);
-
+
mvv_write(0x01, 0x00);
mvv_write(0x05, 0xA0);
mvv_write(0x08, 0x25);
mvv_write(0x09, 0x00);
- mvv_write(0x0A, 0x20|MVVMEMORYWIDTH);
-
+ mvv_write(0x0A, 0x20|MVVMEMORYWIDTH);
+
mvv_write(0x10, 0x02);
mvv_write(0x1E, 0x0C);
mvv_write(0x1F, 0x03);
mvv_write(0x26, 0x06);
-
+
mvv_write(0x2B, 0x00);
mvv_write(0x2C, 0x20);
mvv_write(0x2D, 0x00);
@@ -1018,13 +1018,13 @@
/*
* Initialization and module stuff
*/
-
+
static int __init init_pms_cards(void)
{
printk(KERN_INFO "Mediavision Pro Movie Studio driver 0.02\n");
-
+
data_port = io_port +1;
-
+
if(init_mediavision())
{
printk(KERN_INFO "Board not found.\n");
diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/video/pwc/Makefile
index 2d93a77..8326684 100644
--- a/drivers/media/video/pwc/Makefile
+++ b/drivers/media/video/pwc/Makefile
@@ -15,6 +15,6 @@
endif
clean:
- rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c
+ rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c
rm -rf .tmp_versions
diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt
index 04a640d..11f751a 100644
--- a/drivers/media/video/pwc/philips.txt
+++ b/drivers/media/video/pwc/philips.txt
@@ -47,17 +47,17 @@
size
Can be one of 'sqcif', 'qsif', 'qcif', 'sif', 'cif' or
'vga', for an image size of resp. 128x96, 160x120, 176x144,
- 320x240, 352x288 and 640x480 (of course, only for those cameras that
+ 320x240, 352x288 and 640x480 (of course, only for those cameras that
support these resolutions).
fps
Specifies the desired framerate. Is an integer in the range of 4-30.
fbufs
- This paramter specifies the number of internal buffers to use for storing
- frames from the cam. This will help if the process that reads images from
- the cam is a bit slow or momentarely busy. However, on slow machines it
- only introduces lag, so choose carefully. The default is 3, which is
+ This paramter specifies the number of internal buffers to use for storing
+ frames from the cam. This will help if the process that reads images from
+ the cam is a bit slow or momentarely busy. However, on slow machines it
+ only introduces lag, so choose carefully. The default is 3, which is
reasonable. You can set it between 2 and 5.
mbufs
@@ -65,9 +65,9 @@
buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends.
The default is 2, which is adequate for most applications (double
buffering).
-
+
Should you experience a lot of 'Dumping frame...' messages during
- grabbing with a tool that uses mmap(), you might want to increase if.
+ grabbing with a tool that uses mmap(), you might want to increase if.
However, it doesn't really buffer images, it just gives you a bit more
slack when your program is behind. But you need a multi-threaded or
forked program to really take advantage of these buffers.
@@ -88,15 +88,15 @@
compression (only useful with the plugin)
With this option you can control the compression factor that the camera
- uses to squeeze the image through the USB bus. You can set the
+ uses to squeeze the image through the USB bus. You can set the
parameter between 0 and 3:
0 = prefer uncompressed images; if the requested mode is not available
- in an uncompressed format, the driver will silently switch to low
- compression.
+ in an uncompressed format, the driver will silently switch to low
+ compression.
1 = low compression.
2 = medium compression.
3 = high compression.
-
+
High compression takes less bandwidth of course, but it could also
introduce some unwanted artefacts. The default is 2, medium compression.
See the FAQ on the website for an overview of which modes require
@@ -112,7 +112,7 @@
this is let the LED blink while the camera is in use. This:
leds=500,500
-
+
will blink the LED once every second. But with:
leds=0,0
@@ -123,7 +123,7 @@
when the camera is not used anymore.
This parameter works only with the ToUCam range of cameras (720, 730, 740,
- 750) and OEMs. For other cameras this command is silently ignored, and
+ 750) and OEMs. For other cameras this command is silently ignored, and
the LED cannot be controlled.
Finally: this parameters does not take effect UNTIL the first time you
@@ -144,35 +144,35 @@
format:
[type[.serialnumber]:]node
-
+
The square brackets mean that both the type and the serialnumber are
optional, but a serialnumber cannot be specified without a type (which
would be rather pointless). The serialnumber is separated from the type
by a '.'; the node number by a ':'.
-
+
This somewhat cryptic syntax is best explained by a few examples:
dev_hint=3,5 The first detected cam gets assigned
- /dev/video3, the second /dev/video5. Any
- other cameras will get the first free
- available slot (see below).
+ /dev/video3, the second /dev/video5. Any
+ other cameras will get the first free
+ available slot (see below).
dev_hint=645:1,680:2 The PCA645 camera will get /dev/video1,
- and a PCVC680 /dev/video2.
-
- dev_hint=645.0123:3,645.4567:0 The PCA645 camera with serialnumber
- 0123 goes to /dev/video3, the same
- camera model with the 4567 serial
- gets /dev/video0.
+ and a PCVC680 /dev/video2.
- dev_hint=750:1,4,5,6 The PCVC750 camera will get /dev/video1, the
- next 3 Philips cams will use /dev/video4
- through /dev/video6.
+ dev_hint=645.0123:3,645.4567:0 The PCA645 camera with serialnumber
+ 0123 goes to /dev/video3, the same
+ camera model with the 4567 serial
+ gets /dev/video0.
+
+ dev_hint=750:1,4,5,6 The PCVC750 camera will get /dev/video1, the
+ next 3 Philips cams will use /dev/video4
+ through /dev/video6.
Some points worth knowing:
- - Serialnumbers are case sensitive and must be written full, including
+ - Serialnumbers are case sensitive and must be written full, including
leading zeroes (it's treated as a string).
- - If a device node is already occupied, registration will fail and
+ - If a device node is already occupied, registration will fail and
the webcam is not available.
- You can have up to 64 video devices; be sure to make enough device
nodes in /dev if you want to spread the numbers (this does not apply
@@ -186,13 +186,13 @@
kernel log at debug level.
The trace variable is a bitmask; each bit represents a certain feature.
- If you want to trace something, look up the bit value(s) in the table
+ If you want to trace something, look up the bit value(s) in the table
below, add the values together and supply that to the trace variable.
Value Value Description Default
(dec) (hex)
1 0x1 Module initialization; this will log messages On
- while loading and unloading the module
+ while loading and unloading the module
2 0x2 probe() and disconnect() traces On
@@ -203,7 +203,7 @@
16 0x10 Memory allocation of buffers, etc. Off
32 0x20 Showing underflow, overflow and Dumping frame On
- messages
+ messages
64 0x40 Show viewport and image sizes Off
@@ -217,7 +217,7 @@
Example:
-
+
# modprobe pwc size=cif fps=15 power_save=1
The fbufs, mbufs and trace parameters are global and apply to all connected
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 0398b81..4ba549b 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -31,17 +31,17 @@
/*
Changes
- 2001/08/03 Alvarado Added methods for changing white balance and
- red/green gains
+ 2001/08/03 Alvarado Added methods for changing white balance and
+ red/green gains
*/
/* Control functions for the cam; brightness, contrast, video mode, etc. */
#ifdef __KERNEL__
-#include <asm/uaccess.h>
+#include <asm/uaccess.h>
#endif
#include <asm/errno.h>
-
+
#include "pwc.h"
#include "pwc-ioctl.h"
#include "pwc-uncompress.h"
@@ -116,13 +116,13 @@
"SIF",
"CIF",
"VGA",
-};
+};
/********/
-/* Entries for the Nala (645/646) camera; the Nala doesn't have compression
+/* Entries for the Nala (645/646) camera; the Nala doesn't have compression
preferences, so you either get compressed or non-compressed streams.
-
+
An alternate value of 0 means this mode is not available at all.
*/
@@ -205,13 +205,13 @@
{ /* closest match of framerate */
0, 0, 0, 0, 4, /* 0-4 */
5, 5, 7, 7, 10, /* 5-9 */
- 10, 10, 12, 12, 15, /* 10-14 */
- 15, 15, 15, 20, 20, /* 15-19 */
- 20, 20, 20, 24, 24, /* 20-24 */
- 24, 24, 24, 24, 24, /* 25-29 */
- 24 /* 30 */
+ 10, 10, 12, 12, 15, /* 10-14 */
+ 15, 15, 15, 20, 20, /* 15-19 */
+ 20, 20, 20, 24, 24, /* 20-24 */
+ 24, 24, 24, 24, 24, /* 25-29 */
+ 24 /* 30 */
};
- int frames2table[31] =
+ int frames2table[31] =
{ 0, 0, 0, 0, 0, /* 0-4 */
1, 1, 1, 2, 2, /* 5-9 */
3, 3, 4, 4, 4, /* 10-14 */
@@ -220,7 +220,7 @@
7, 7, 7, 7, 7, /* 25-29 */
7 /* 30 */
};
-
+
if (size < 0 || size > PSZ_CIF || frames < 4 || frames > 25)
return -EINVAL;
frames = frames2frames[frames];
@@ -232,7 +232,7 @@
if (pEntry->compressed)
return -ENOENT; /* Not supported. */
- memcpy(buf, pEntry->mode, 3);
+ memcpy(buf, pEntry->mode, 3);
ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3);
if (ret < 0) {
Debug("Failed to send video command... %d\n", ret);
@@ -257,7 +257,7 @@
break;
}
}
-
+
pdev->cmd_len = 3;
memcpy(pdev->cmd_buf, buf, 3);
@@ -352,13 +352,13 @@
/* special case: VGA @ 5 fps and snapshot is raw bayer mode */
if (size == PSZ_VGA && frames == 5 && snapshot)
{
- /* Only available in case the raw palette is selected or
- we have the decompressor available. This mode is
- only available in compressed form
+ /* Only available in case the raw palette is selected or
+ we have the decompressor available. This mode is
+ only available in compressed form
*/
if (pdev->vpalette == VIDEO_PALETTE_RAW)
{
- Info("Choosing VGA/5 BAYER mode (%d).\n", pdev->vpalette);
+ Info("Choosing VGA/5 BAYER mode (%d).\n", pdev->vpalette);
pChoose = &RawEntry;
}
else
@@ -368,9 +368,9 @@
}
else
{
- /* Find a supported framerate with progressively higher compression ratios
+ /* Find a supported framerate with progressively higher compression ratios
if the preferred ratio is not available.
- Skip this step when using RAW modes.
+ Skip this step when using RAW modes.
*/
while (compression <= 3) {
pChoose = &Kiara_table[size][fps][compression];
@@ -383,7 +383,7 @@
return -ENOENT; /* Not supported. */
Debug("Using alternate setting %d.\n", pChoose->alternate);
-
+
/* usb_control_msg won't take staticly allocated arrays as argument?? */
memcpy(buf, pChoose->mode, 12);
if (snapshot)
@@ -463,9 +463,9 @@
*/
int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot)
{
- int ret, size;
+ int ret, size;
- Trace(TRACE_FLOW, "set_video_mode(%dx%d @ %d, palette %d).\n", width, height, frames, pdev->vpalette);
+ Trace(TRACE_FLOW, "set_video_mode(%dx%d @ %d, palette %d).\n", width, height, frames, pdev->vpalette);
size = pwc_decode_size(pdev, width, height);
if (size < 0) {
Debug("Could not find suitable size.\n");
@@ -473,7 +473,7 @@
}
Debug("decode_size = %d.\n", size);
- ret = -EINVAL;
+ ret = -EINVAL;
switch(pdev->type) {
case 645:
case 646:
@@ -485,7 +485,7 @@
case 690:
ret = set_video_mode_Timon(pdev, size, frames, compression, snapshot);
break;
-
+
case 720:
case 730:
case 740:
@@ -517,7 +517,7 @@
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+ ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
if (ret < 0)
return ret;
return buf << 9;
@@ -566,7 +566,7 @@
{
char buf;
int ret;
-
+
ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -622,14 +622,14 @@
{
char buf;
int ret;
-
+
if (mode)
buf = 0x0; /* auto */
else
buf = 0xff; /* fixed */
ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1);
-
+
if (!mode && ret >= 0) {
if (value < 0)
value = 0;
@@ -647,7 +647,7 @@
{
unsigned char buf;
int ret;
-
+
ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -658,7 +658,7 @@
return ret;
if (buf > 0x3F)
buf = 0x3F;
- *value = (buf << 10);
+ *value = (buf << 10);
}
else { /* auto */
ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1);
@@ -683,7 +683,7 @@
buf[0] = 0x0; /* auto */
else
buf[0] = 0xff; /* fixed */
-
+
ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1);
if (!mode && ret >= 0) {
@@ -713,7 +713,7 @@
ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2);
}
return ret;
-}
+}
/* POWER */
@@ -765,22 +765,22 @@
* 02: fluorescent lighting
* 03: manual
* 04: auto
- */
+ */
static inline int pwc_set_awb(struct pwc_device *pdev, int mode)
{
char buf;
int ret;
-
+
if (mode < 0)
mode = 0;
-
+
if (mode > 4)
mode = 4;
-
+
buf = mode & 0x07; /* just the lowest three bits */
-
+
ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1);
-
+
if (ret < 0)
return ret;
return 0;
@@ -790,17 +790,17 @@
{
unsigned char buf;
int ret;
-
+
ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1);
- if (ret < 0)
+ if (ret < 0)
return ret;
return buf;
}
static inline int pwc_set_red_gain(struct pwc_device *pdev, int value)
{
- unsigned char buf;
+ unsigned char buf;
if (value < 0)
value = 0;
@@ -815,7 +815,7 @@
{
unsigned char buf;
int ret;
-
+
ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -841,7 +841,7 @@
{
unsigned char buf;
int ret;
-
+
ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -851,14 +851,14 @@
/* The following two functions are different, since they only read the
- internal red/blue gains, which may be different from the manual
+ internal red/blue gains, which may be different from the manual
gains set or read above.
- */
+ */
static inline int pwc_read_red_gain(struct pwc_device *pdev, int *value)
{
unsigned char buf;
int ret;
-
+
ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -870,7 +870,7 @@
{
unsigned char buf;
int ret;
-
+
ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -882,7 +882,7 @@
static inline int pwc_set_wb_speed(struct pwc_device *pdev, int speed)
{
unsigned char buf;
-
+
/* useful range is 0x01..0x20 */
buf = speed / 0x7f0;
return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
@@ -892,7 +892,7 @@
{
unsigned char buf;
int ret;
-
+
ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -904,7 +904,7 @@
static inline int pwc_set_wb_delay(struct pwc_device *pdev, int delay)
{
unsigned char buf;
-
+
/* useful range is 0x01..0x3F */
buf = (delay >> 10);
return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
@@ -914,7 +914,7 @@
{
unsigned char buf;
int ret;
-
+
ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -950,7 +950,7 @@
{
unsigned char buf[2];
int ret;
-
+
if (pdev->type < 730) {
*on_value = -1;
*off_value = -1;
@@ -969,7 +969,7 @@
{
unsigned char buf;
int ret;
-
+
if (contour < 0)
buf = 0xff; /* auto contour on */
else
@@ -977,16 +977,16 @@
ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
if (ret < 0)
return ret;
-
+
if (contour < 0)
return 0;
if (contour > 0xffff)
contour = 0xffff;
-
+
buf = (contour >> 10); /* contour preset is [0..3f] */
ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
- if (ret < 0)
- return ret;
+ if (ret < 0)
+ return ret;
return 0;
}
@@ -994,7 +994,7 @@
{
unsigned char buf;
int ret;
-
+
ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -1002,7 +1002,7 @@
if (buf == 0) {
/* auto mode off, query current preset value */
ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
- if (ret < 0)
+ if (ret < 0)
return ret;
*contour = buf << 10;
}
@@ -1015,7 +1015,7 @@
static inline int pwc_set_backlight(struct pwc_device *pdev, int backlight)
{
unsigned char buf;
-
+
if (backlight)
buf = 0xff;
else
@@ -1027,7 +1027,7 @@
{
int ret;
unsigned char buf;
-
+
ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -1039,7 +1039,7 @@
static inline int pwc_set_flicker(struct pwc_device *pdev, int flicker)
{
unsigned char buf;
-
+
if (flicker)
buf = 0xff;
else
@@ -1051,7 +1051,7 @@
{
int ret;
unsigned char buf;
-
+
ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -1076,7 +1076,7 @@
{
int ret;
unsigned char buf;
-
+
ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
if (ret < 0)
return ret;
@@ -1087,7 +1087,7 @@
static int pwc_mpt_reset(struct pwc_device *pdev, int flags)
{
unsigned char buf;
-
+
buf = flags & 0x03; // only lower two bits are currently used
return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1);
}
@@ -1095,7 +1095,7 @@
static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
{
unsigned char buf[4];
-
+
/* set new relative angle; angles are expressed in degrees * 100,
but cam as .5 degree resolution, hence divide by 200. Also
the angle must be multiplied by 64 before it's send to
@@ -1114,7 +1114,7 @@
{
int ret;
unsigned char buf[5];
-
+
ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5);
if (ret < 0)
return ret;
@@ -1129,14 +1129,14 @@
{
unsigned char buf;
int ret = -1, request;
-
+
if (pdev->type < 675)
request = SENSOR_TYPE_FORMATTER1;
else if (pdev->type < 730)
return -1; /* The Vesta series doesn't have this call */
else
request = SENSOR_TYPE_FORMATTER2;
-
+
ret = RecvControlMsg(GET_STATUS_CTL, request, 1);
if (ret < 0)
return ret;
@@ -1163,23 +1163,23 @@
ret = -EINVAL;
break;
}
-
+
case VIDIOCPWCSUSER:
{
if (pwc_save_user(pdev))
ret = -EINVAL;
break;
}
-
+
case VIDIOCPWCFACTORY:
{
if (pwc_restore_factory(pdev))
ret = -EINVAL;
break;
}
-
+
case VIDIOCPWCSCQUAL:
- {
+ {
int *qual = arg;
if (*qual < 0 || *qual > 3)
@@ -1190,14 +1190,14 @@
pdev->vcompression = *qual;
break;
}
-
+
case VIDIOCPWCGCQUAL:
{
int *qual = arg;
*qual = pdev->vcompression;
break;
}
-
+
case VIDIOCPWCPROBE:
{
struct pwc_probe *probe = arg;
@@ -1220,27 +1220,27 @@
ret = -EINVAL;
break;
}
-
+
case VIDIOCPWCGAGC:
{
int *agc = arg;
-
+
if (pwc_get_agc(pdev, agc))
ret = -EINVAL;
break;
}
-
+
case VIDIOCPWCSSHUTTER:
{
int *shutter_speed = arg;
ret = pwc_set_shutter_speed(pdev, *shutter_speed < 0 ? 1 : 0, *shutter_speed);
break;
}
-
- case VIDIOCPWCSAWB:
+
+ case VIDIOCPWCSAWB:
{
struct pwc_whitebalance *wb = arg;
-
+
ret = pwc_set_awb(pdev, wb->mode);
if (ret >= 0 && wb->mode == PWC_WB_MANUAL) {
pwc_set_red_gain(pdev, wb->manual_red);
@@ -1270,18 +1270,18 @@
ret = pwc_read_red_gain(pdev, &wb->read_red);
if (ret < 0)
break;
- ret = pwc_read_blue_gain(pdev, &wb->read_blue);
- if (ret < 0)
- break;
+ ret = pwc_read_blue_gain(pdev, &wb->read_blue);
+ if (ret < 0)
+ break;
}
}
break;
}
-
+
case VIDIOCPWCSAWBSPEED:
{
struct pwc_wb_speed *wbs = arg;
-
+
if (wbs->control_speed > 0) {
ret = pwc_set_wb_speed(pdev, wbs->control_speed);
}
@@ -1290,11 +1290,11 @@
}
break;
}
-
+
case VIDIOCPWCGAWBSPEED:
{
struct pwc_wb_speed *wbs = arg;
-
+
ret = pwc_get_wb_speed(pdev, &wbs->control_speed);
if (ret < 0)
break;
@@ -1304,7 +1304,7 @@
break;
}
- case VIDIOCPWCSLED:
+ case VIDIOCPWCSLED:
{
struct pwc_leds *leds = arg;
ret = pwc_set_leds(pdev, leds->led_on, leds->led_off);
@@ -1325,14 +1325,14 @@
ret = pwc_set_contour(pdev, *contour);
break;
}
-
+
case VIDIOCPWCGCONTOUR:
{
int *contour = arg;
ret = pwc_get_contour(pdev, contour);
break;
}
-
+
case VIDIOCPWCSBACKLIGHT:
{
int *backlight = arg;
@@ -1346,7 +1346,7 @@
ret = pwc_get_backlight(pdev, backlight);
break;
}
-
+
case VIDIOCPWCSFLICKER:
{
int *flicker = arg;
@@ -1360,14 +1360,14 @@
ret = pwc_get_flicker(pdev, flicker);
break;
}
-
+
case VIDIOCPWCSDYNNOISE:
{
int *dynnoise = arg;
ret = pwc_set_dynamic_noise(pdev, *dynnoise);
break;
}
-
+
case VIDIOCPWCGDYNNOISE:
{
int *dynnoise = arg;
@@ -1381,61 +1381,61 @@
size->width = pdev->image.x;
size->height = pdev->image.y;
break;
- }
-
- case VIDIOCPWCMPTRESET:
- {
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- int *flags = arg;
+ }
+
+ case VIDIOCPWCMPTRESET:
+ {
+ if (pdev->features & FEATURE_MOTOR_PANTILT)
+ {
+ int *flags = arg;
ret = pwc_mpt_reset(pdev, *flags);
- if (ret >= 0)
- {
- pdev->pan_angle = 0;
- pdev->tilt_angle = 0;
- }
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTGRANGE:
- {
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- struct pwc_mpt_range *range = arg;
- *range = pdev->angle_range;
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTSANGLE:
- {
- int new_pan, new_tilt;
-
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- struct pwc_mpt_angles *angles = arg;
+ if (ret >= 0)
+ {
+ pdev->pan_angle = 0;
+ pdev->tilt_angle = 0;
+ }
+ }
+ else
+ {
+ ret = -ENXIO;
+ }
+ break;
+ }
+
+ case VIDIOCPWCMPTGRANGE:
+ {
+ if (pdev->features & FEATURE_MOTOR_PANTILT)
+ {
+ struct pwc_mpt_range *range = arg;
+ *range = pdev->angle_range;
+ }
+ else
+ {
+ ret = -ENXIO;
+ }
+ break;
+ }
+
+ case VIDIOCPWCMPTSANGLE:
+ {
+ int new_pan, new_tilt;
+
+ if (pdev->features & FEATURE_MOTOR_PANTILT)
+ {
+ struct pwc_mpt_angles *angles = arg;
/* The camera can only set relative angles, so
do some calculations when getting an absolute angle .
*/
if (angles->absolute)
{
- new_pan = angles->pan;
- new_tilt = angles->tilt;
- }
- else
- {
- new_pan = pdev->pan_angle + angles->pan;
- new_tilt = pdev->tilt_angle + angles->tilt;
+ new_pan = angles->pan;
+ new_tilt = angles->tilt;
+ }
+ else
+ {
+ new_pan = pdev->pan_angle + angles->pan;
+ new_tilt = pdev->tilt_angle + angles->tilt;
}
/* check absolute ranges */
if (new_pan < pdev->angle_range.pan_min ||
@@ -1463,53 +1463,53 @@
pdev->tilt_angle += new_tilt;
}
if (ret == -EPIPE) /* stall -> out of range */
- ret = -ERANGE;
+ ret = -ERANGE;
}
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
+ }
+ else
+ {
+ ret = -ENXIO;
+ }
+ break;
+ }
- case VIDIOCPWCMPTGANGLE:
- {
-
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- struct pwc_mpt_angles *angles = arg;
+ case VIDIOCPWCMPTGANGLE:
+ {
- angles->absolute = 1;
- angles->pan = pdev->pan_angle;
- angles->tilt = pdev->tilt_angle;
- }
- else
- {
- ret = -ENXIO;
- }
- break;
- }
-
- case VIDIOCPWCMPTSTATUS:
- {
- if (pdev->features & FEATURE_MOTOR_PANTILT)
- {
- struct pwc_mpt_status *status = arg;
- ret = pwc_mpt_get_status(pdev, status);
- }
- else
- {
- ret = -ENXIO;
- }
- break;
+ if (pdev->features & FEATURE_MOTOR_PANTILT)
+ {
+ struct pwc_mpt_angles *angles = arg;
+
+ angles->absolute = 1;
+ angles->pan = pdev->pan_angle;
+ angles->tilt = pdev->tilt_angle;
+ }
+ else
+ {
+ ret = -ENXIO;
+ }
+ break;
+ }
+
+ case VIDIOCPWCMPTSTATUS:
+ {
+ if (pdev->features & FEATURE_MOTOR_PANTILT)
+ {
+ struct pwc_mpt_status *status = arg;
+ ret = pwc_mpt_get_status(pdev, status);
+ }
+ else
+ {
+ ret = -ENXIO;
+ }
+ break;
}
case VIDIOCPWCGVIDCMD:
{
struct pwc_video_command *cmd = arg;
-
- cmd->type = pdev->type;
+
+ cmd->type = pdev->type;
cmd->release = pdev->release;
cmd->command_len = pdev->cmd_len;
memcpy(&cmd->command_buf, pdev->cmd_buf, pdev->cmd_len);
@@ -1531,7 +1531,7 @@
ret = -ENOIOCTLCMD;
break;
}
-
+
if (ret > 0)
return 0;
return ret;
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 90eb260..4141829 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -25,18 +25,18 @@
*/
-/*
+/*
This code forms the interface between the USB layers and the Philips
specific stuff. Some adanved stuff of the driver falls under an
NDA, signed between me and Philips B.V., Eindhoven, the Netherlands, and
- is thus not distributed in source form. The binary pwcx.o module
+ is thus not distributed in source form. The binary pwcx.o module
contains the code that falls under the NDA.
-
- In case you're wondering: 'pwc' stands for "Philips WebCam", but
+
+ In case you're wondering: 'pwc' stands for "Philips WebCam", but
I really didn't want to type 'philips_web_cam' every time (I'm lazy as
any Linux kernel hacker, but I don't like uncomprehensible abbreviations
without explanation).
-
+
Oh yes, convention: to disctinguish between all the various pointers to
device-structures, I use these names for the pointer variables:
udev: struct usb_device *
@@ -170,14 +170,14 @@
/* Okay, this is some magic that I worked out and the reasoning behind it...
- The biggest problem with any USB device is of course: "what to do
+ The biggest problem with any USB device is of course: "what to do
when the user unplugs the device while it is in use by an application?"
We have several options:
1) Curse them with the 7 plagues when they do (requires divine intervention)
2) Tell them not to (won't work: they'll do it anyway)
3) Oops the kernel (this will have a negative effect on a user's uptime)
4) Do something sensible.
-
+
Of course, we go for option 4.
It happens that this device will be linked to two times, once from
@@ -185,15 +185,15 @@
pointers. This is done when the device is probed() and all initialization
succeeded. The pwc_device struct links back to both structures.
- When a device is unplugged while in use it will be removed from the
- list of known USB devices; I also de-register it as a V4L device, but
+ When a device is unplugged while in use it will be removed from the
+ list of known USB devices; I also de-register it as a V4L device, but
unfortunately I can't free the memory since the struct is still in use
by the file descriptor. This free-ing is then deferend until the first
opportunity. Crude, but it works.
-
+
A small 'advantage' is that if a user unplugs the cam and plugs it back
in, it should get assigned the same video device minor, but unfortunately
- it's non-trivial to re-link the cam back to the video device... (that
+ it's non-trivial to re-link the cam back to the video device... (that
would surely be magic! :))
*/
@@ -203,14 +203,14 @@
/* Here we want the physical address of the memory.
* This is used when initializing the contents of the area.
*/
-static inline unsigned long kvirt_to_pa(unsigned long adr)
+static inline unsigned long kvirt_to_pa(unsigned long adr)
{
- unsigned long kva, ret;
+ unsigned long kva, ret;
kva = (unsigned long) page_address(vmalloc_to_page((void *)adr));
kva |= adr & (PAGE_SIZE-1); /* restore the offset */
ret = __pa(kva);
- return ret;
+ return ret;
}
static void * rvmalloc(unsigned long size)
@@ -219,13 +219,13 @@
unsigned long adr;
size=PAGE_ALIGN(size);
- mem=vmalloc_32(size);
- if (mem)
+ mem=vmalloc_32(size);
+ if (mem)
{
memset(mem, 0, size); /* Clear the ram out, no junk to the user */
- adr=(unsigned long) mem;
- while (size > 0)
- {
+ adr=(unsigned long) mem;
+ while (size > 0)
+ {
SetPageReserved(vmalloc_to_page((void *)adr));
adr+=PAGE_SIZE;
size-=PAGE_SIZE;
@@ -236,13 +236,13 @@
static void rvfree(void * mem, unsigned long size)
{
- unsigned long adr;
+ unsigned long adr;
- if (mem)
+ if (mem)
{
- adr=(unsigned long) mem;
- while ((long) size > 0)
- {
+ adr=(unsigned long) mem;
+ while ((long) size > 0)
+ {
ClearPageReserved(vmalloc_to_page((void *)adr));
adr+=PAGE_SIZE;
size-=PAGE_SIZE;
@@ -263,13 +263,13 @@
if (pdev == NULL)
return -ENXIO;
-
+
#ifdef PWC_MAGIC
if (pdev->magic != PWC_MAGIC) {
Err("allocate_buffers(): magic failed.\n");
return -ENXIO;
}
-#endif
+#endif
/* Allocate Isochronous pipe buffers */
for (i = 0; i < MAX_ISO_BUFS; i++) {
if (pdev->sbuf[i].data == NULL) {
@@ -308,7 +308,7 @@
memset(kbuf, 128, PWC_FRAME_SIZE);
}
}
-
+
/* Allocate decompressor table space */
kbuf = NULL;
switch (pdev->type)
@@ -320,7 +320,7 @@
case 730:
case 740:
case 750:
-#if 0
+#if 0
Trace(TRACE_MEMORY,"private_data(%zu)\n",sizeof(struct pwc_dec23_private));
kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); /* Timon & Kiara */
break;
@@ -329,11 +329,11 @@
/* TODO & FIXME */
kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL);
break;
-#endif
+#endif
;
}
pdev->decompress_data = kbuf;
-
+
/* Allocate image buffer; double buffer for mmap() */
kbuf = rvmalloc(default_mbufs * pdev->len_per_image);
if (kbuf == NULL) {
@@ -348,7 +348,7 @@
pdev->image_ptr[i] = NULL;
kbuf = NULL;
-
+
Trace(TRACE_MEMORY, "<< pwc_allocate_buffers()\n");
return 0;
}
@@ -366,7 +366,7 @@
Err("free_buffers(): magic failed.\n");
return;
}
-#endif
+#endif
/* Release Iso-pipe buffers */
for (i = 0; i < MAX_ISO_BUFS; i++)
@@ -403,17 +403,17 @@
rvfree(pdev->image_data, default_mbufs * pdev->len_per_image);
}
pdev->image_data = NULL;
-
+
Trace(TRACE_MEMORY, "Leaving free_buffers().\n");
}
-/* The frame & image buffer mess.
+/* The frame & image buffer mess.
Yes, this is a mess. Well, it used to be simple, but alas... In this
module, 3 buffers schemes are used to get the data from the USB bus to
the user program. The first scheme involves the ISO buffers (called thus
since they transport ISO data from the USB controller), and not really
- interesting. Suffices to say the data from this buffer is quickly
+ interesting. Suffices to say the data from this buffer is quickly
gathered in an interrupt handler (pwc_isoc_handler) and placed into the
frame buffer.
@@ -443,8 +443,8 @@
and a 'full' frame list:
* Initially, all frame buffers but one are on the 'empty' list; the one
remaining buffer is our initial fill frame.
- * If a frame is needed for filling, we try to take it from the 'empty'
- list, unless that list is empty, in which case we take the buffer at
+ * If a frame is needed for filling, we try to take it from the 'empty'
+ list, unless that list is empty, in which case we take the buffer at
the head of the 'full' list.
* When our fill buffer has been filled, it is appended to the 'full'
list.
@@ -646,7 +646,7 @@
case -ETIMEDOUT: errmsg = "NAK (device does not respond)"; break;
}
Trace(TRACE_FLOW, "pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg);
- /* Give up after a number of contiguous errors on the USB bus.
+ /* Give up after a number of contiguous errors on the USB bus.
Appearantly something is wrong so we simulate an unplug event.
*/
if (++pdev->visoc_errors > MAX_ISOC_ERRORS)
@@ -673,8 +673,8 @@
pdev->visoc_errors = 0;
/* vsync: 0 = don't copy data
- 1 = sync-hunt
- 2 = synched
+ 1 = sync-hunt
+ 2 = synched
*/
/* Compact data */
for (i = 0; i < urb->number_of_packets; i++) {
@@ -701,18 +701,18 @@
} /* ..flen > 0 */
if (flen < pdev->vlast_packet_size) {
- /* Shorter packet... We probably have the end of an image-frame;
+ /* Shorter packet... We probably have the end of an image-frame;
wake up read() process and let select()/poll() do something.
Decompression is done in user time over there.
*/
if (pdev->vsync == 2) {
- /* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus
- frames on the USB wire after an exposure change. This conditition is
+ /* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus
+ frames on the USB wire after an exposure change. This conditition is
however detected in the cam and a bit is set in the header.
*/
if (pdev->type == 730) {
unsigned char *ptr = (unsigned char *)fbuf->data;
-
+
if (ptr[1] == 1 && ptr[0] & 0x10) {
#if PWC_DEBUG
Debug("Hyundai CMOS sensor bug. Dropping frame %d.\n", fbuf->sequence);
@@ -733,13 +733,13 @@
Info("Image is normal.\n");
}
pdev->vmirror = ptr[0] & 0x03;
- /* Sometimes the trailer of the 730 is still sent as a 4 byte packet
+ /* Sometimes the trailer of the 730 is still sent as a 4 byte packet
after a short frame; this condition is filtered out specifically. A 4 byte
frame doesn't make sense anyway.
- So we get either this sequence:
- drop_bit set -> 4 byte frame -> short frame -> good frame
+ So we get either this sequence:
+ drop_bit set -> 4 byte frame -> short frame -> good frame
Or this one:
- drop_bit set -> short frame -> good frame
+ drop_bit set -> short frame -> good frame
So we drop either 3 or 2 frames in all!
*/
if (fbuf->filled == 4)
@@ -830,7 +830,7 @@
intf = usb_ifnum_to_if(udev, 0);
if (intf)
idesc = usb_altnum_to_altsetting(intf, pdev->valternate);
-
+
if (!idesc)
return -EFAULT;
@@ -841,7 +841,7 @@
pdev->vmax_packet_size = le16_to_cpu(idesc->endpoint[i].desc.wMaxPacketSize);
break;
}
-
+
if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) {
Err("Failed to find packet size for video endpoint in current alternate setting.\n");
return -ENFILE; /* Odd error, that should be noticeable */
@@ -875,18 +875,18 @@
return ret;
}
- /* init URB structure */
+ /* init URB structure */
for (i = 0; i < MAX_ISO_BUFS; i++) {
urb = pdev->sbuf[i].urb;
urb->interval = 1; // devik
urb->dev = udev;
- urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint);
+ urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint);
urb->transfer_flags = URB_ISO_ASAP;
- urb->transfer_buffer = pdev->sbuf[i].data;
- urb->transfer_buffer_length = ISO_BUFFER_SIZE;
- urb->complete = pwc_isoc_handler;
- urb->context = pdev;
+ urb->transfer_buffer = pdev->sbuf[i].data;
+ urb->transfer_buffer_length = ISO_BUFFER_SIZE;
+ urb->complete = pwc_isoc_handler;
+ urb->context = pdev;
urb->start_frame = 0;
urb->number_of_packets = ISO_FRAMES_PER_DESC;
for (j = 0; j < ISO_FRAMES_PER_DESC; j++) {
@@ -935,7 +935,7 @@
}
/* Stop camera, but only if we are sure the camera is still there (unplug
- is signalled by EPIPE)
+ is signalled by EPIPE)
*/
if (pdev->error_status && pdev->error_status != EPIPE) {
Trace(TRACE_OPEN, "Setting alternate interface 0.\n");
@@ -956,12 +956,12 @@
pwc_reset_buffers(pdev);
/* Try to set video mode... */
start = ret = pwc_set_video_mode(pdev, width, height, new_fps, new_compression, new_snapshot);
- if (ret) {
- Trace(TRACE_FLOW, "pwc_set_video_mode attempt 1 failed.\n");
+ if (ret) {
+ Trace(TRACE_FLOW, "pwc_set_video_mode attempt 1 failed.\n");
/* That failed... restore old mode (we know that worked) */
start = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
if (start) {
- Trace(TRACE_FLOW, "pwc_set_video_mode attempt 2 failed.\n");
+ Trace(TRACE_FLOW, "pwc_set_video_mode attempt 2 failed.\n");
}
}
if (start == 0)
@@ -987,18 +987,18 @@
struct pwc_device *pdev;
Trace(TRACE_OPEN, ">> video_open called(vdev = 0x%p).\n", vdev);
-
+
pdev = (struct pwc_device *)vdev->priv;
if (pdev == NULL)
BUG();
if (pdev->vopen)
return -EBUSY;
-
+
down(&pdev->modlock);
if (!pdev->usb_init) {
Trace(TRACE_OPEN, "Doing first time initialization.\n");
pdev->usb_init = 1;
-
+
if (pwc_trace & TRACE_OPEN)
{
/* Query sensor type */
@@ -1036,7 +1036,7 @@
/* Set LED on/off time */
if (pwc_set_leds(pdev, led_on, led_off) < 0)
Info("Failed to set LED on/off time.\n");
-
+
pwc_construct(pdev); /* set min/max sizes correct */
/* So far, so good. Allocate memory. */
@@ -1046,7 +1046,7 @@
up(&pdev->modlock);
return i;
}
-
+
/* Reset buffers & parameters */
pwc_reset_buffers(pdev);
for (i = 0; i < default_mbufs; i++)
@@ -1081,7 +1081,7 @@
up(&pdev->modlock);
return i;
}
-
+
i = pwc_isoc_init(pdev);
if (i) {
Trace(TRACE_OPEN, "Failed to init ISOC stuff = %d.\n", i);
@@ -1155,13 +1155,13 @@
/*
* FIXME: what about two parallel reads ????
* ANSWER: Not supported. You can't open the device more than once,
- despite what the V4L1 interface says. First, I don't see
- the need, second there's no mechanism of alerting the
- 2nd/3rd/... process of events like changing image size.
- And I don't see the point of blocking that for the
- 2nd/3rd/... process.
- In multi-threaded environments reading parallel from any
- device is tricky anyhow.
+ despite what the V4L1 interface says. First, I don't see
+ the need, second there's no mechanism of alerting the
+ 2nd/3rd/... process of events like changing image size.
+ And I don't see the point of blocking that for the
+ 2nd/3rd/... process.
+ In multi-threaded environments reading parallel from any
+ device is tricky anyhow.
*/
static ssize_t pwc_video_read(struct file *file, char __user * buf,
@@ -1171,7 +1171,7 @@
struct pwc_device *pdev;
int noblock = file->f_flags & O_NONBLOCK;
DECLARE_WAITQUEUE(wait, current);
- int bytes_to_read;
+ int bytes_to_read;
Trace(TRACE_READ, "video_read(0x%p, %p, %zu) called.\n", vdev, buf, count);
if (vdev == NULL)
@@ -1193,22 +1193,22 @@
set_current_state(TASK_RUNNING);
return -pdev->error_status ;
}
- if (noblock) {
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
- return -EWOULDBLOCK;
- }
- if (signal_pending(current)) {
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
- return -ERESTARTSYS;
- }
- schedule();
- set_current_state(TASK_INTERRUPTIBLE);
+ if (noblock) {
+ remove_wait_queue(&pdev->frameq, &wait);
+ set_current_state(TASK_RUNNING);
+ return -EWOULDBLOCK;
+ }
+ if (signal_pending(current)) {
+ remove_wait_queue(&pdev->frameq, &wait);
+ set_current_state(TASK_RUNNING);
+ return -ERESTARTSYS;
+ }
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
}
remove_wait_queue(&pdev->frameq, &wait);
set_current_state(TASK_RUNNING);
-
+
/* Decompress and release frame */
if (pwc_handle_frame(pdev))
return -EFAULT;
@@ -1218,7 +1218,7 @@
if (pdev->vpalette == VIDEO_PALETTE_RAW)
bytes_to_read = pdev->frame_size;
else
- bytes_to_read = pdev->view.size;
+ bytes_to_read = pdev->view.size;
/* copy bytes to user space; we allow for partial reads */
if (count + pdev->image_read_pos > bytes_to_read)
@@ -1348,11 +1348,11 @@
struct video_picture *p = arg;
/*
* FIXME: Suppose we are mid read
- ANSWER: No problem: the firmware of the camera
- can handle brightness/contrast/etc
- changes at _any_ time, and the palette
- is used exactly once in the uncompress
- routine.
+ ANSWER: No problem: the firmware of the camera
+ can handle brightness/contrast/etc
+ changes at _any_ time, and the palette
+ is used exactly once in the uncompress
+ routine.
*/
pwc_set_brightness(pdev, p->brightness);
pwc_set_contrast(pdev, p->contrast);
@@ -1373,21 +1373,21 @@
break;
}
- /* Window/size parameters */
+ /* Window/size parameters */
case VIDIOCGWIN:
{
struct video_window *vw = arg;
-
+
vw->x = 0;
vw->y = 0;
vw->width = pdev->view.x;
vw->height = pdev->view.y;
vw->chromakey = 0;
- vw->flags = (pdev->vframes << PWC_FPS_SHIFT) |
- (pdev->vsnapshot ? PWC_FPS_SNAPSHOT : 0);
+ vw->flags = (pdev->vframes << PWC_FPS_SHIFT) |
+ (pdev->vsnapshot ? PWC_FPS_SNAPSHOT : 0);
break;
}
-
+
case VIDIOCSWIN:
{
struct video_window *vw = arg;
@@ -1402,9 +1402,9 @@
ret = pwc_try_video_mode(pdev, vw->width, vw->height, fps, pdev->vcompression, snapshot);
if (ret)
return ret;
- break;
+ break;
}
-
+
/* We don't have overlay support (yet) */
case VIDIOCGFBUF:
{
@@ -1471,8 +1471,8 @@
return -EBUSY; /* buffer wasn't available. Bummer */
pdev->image_used[vm->frame] = 1;
- /* Okay, we're done here. In the SYNC call we wait until a
- frame comes available, then expand image into the given
+ /* Okay, we're done here. In the SYNC call we wait until a
+ frame comes available, then expand image into the given
buffer.
In contrast to the CPiA cam the Philips cams deliver a
constant stream, almost like a grabber card. Also,
@@ -1487,16 +1487,16 @@
{
/* The doc says: "Whenever a buffer is used it should
call VIDIOCSYNC to free this frame up and continue."
-
- The only odd thing about this whole procedure is
+
+ The only odd thing about this whole procedure is
that MCAPTURE flags the buffer as "in use", and
- SYNC immediately unmarks it, while it isn't
+ SYNC immediately unmarks it, while it isn't
after SYNC that you know that the buffer actually
got filled! So you better not start a CAPTURE in
- the same frame immediately (use double buffering).
- This is not a problem for this cam, since it has
- extra intermediate buffers, but a hardware
- grabber card will then overwrite the buffer
+ the same frame immediately (use double buffering).
+ This is not a problem for this cam, since it has
+ extra intermediate buffers, but a hardware
+ grabber card will then overwrite the buffer
you're working on.
*/
int *mbuf = arg;
@@ -1512,10 +1512,10 @@
return -EINVAL;
/* Add ourselves to the frame wait-queue.
-
+
FIXME: needs auditing for safety.
QUESTION: In what respect? I think that using the
- frameq is safe now.
+ frameq is safe now.
*/
add_wait_queue(&pdev->frameq, &wait);
while (pdev->full_frames == NULL) {
@@ -1524,21 +1524,21 @@
set_current_state(TASK_RUNNING);
return -pdev->error_status;
}
-
- if (signal_pending(current)) {
- remove_wait_queue(&pdev->frameq, &wait);
- set_current_state(TASK_RUNNING);
- return -ERESTARTSYS;
- }
- schedule();
- set_current_state(TASK_INTERRUPTIBLE);
+
+ if (signal_pending(current)) {
+ remove_wait_queue(&pdev->frameq, &wait);
+ set_current_state(TASK_RUNNING);
+ return -ERESTARTSYS;
+ }
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
}
remove_wait_queue(&pdev->frameq, &wait);
set_current_state(TASK_RUNNING);
-
- /* The frame is ready. Expand in the image buffer
- requested by the user. I don't care if you
- mmap() 5 buffers and request data in this order:
+
+ /* The frame is ready. Expand in the image buffer
+ requested by the user. I don't care if you
+ mmap() 5 buffers and request data in this order:
buffer 4 2 3 0 1 2 3 0 4 3 1 . . .
Grabber hardware may not be so forgiving.
*/
@@ -1551,11 +1551,11 @@
return -EFAULT;
break;
}
-
+
case VIDIOCGAUDIO:
{
struct video_audio *v = arg;
-
+
strcpy(v->name, "Microphone");
v->audio = -1; /* unknown audio minor */
v->flags = 0;
@@ -1565,19 +1565,19 @@
v->treble = 0;
v->balance = 0x8000;
v->step = 1;
- break;
+ break;
}
-
+
case VIDIOCSAUDIO:
{
/* Dummy: nothing can be set */
break;
}
-
+
case VIDIOCGUNIT:
{
struct video_unit *vu = arg;
-
+
vu->video = pdev->vdev->minor & 0x3F;
vu->audio = -1; /* not known yet */
vu->vbi = -1;
@@ -1589,7 +1589,7 @@
return pwc_ioctl(pdev, cmd, arg);
} /* ..switch */
return 0;
-}
+}
static int pwc_video_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
@@ -1605,10 +1605,10 @@
unsigned long start = vma->vm_start;
unsigned long size = vma->vm_end-vma->vm_start;
unsigned long page, pos;
-
+
Trace(TRACE_MEMORY, "mmap(0x%p, 0x%lx, %lu) called.\n", vdev, start, size);
pdev = vdev->priv;
-
+
vma->vm_flags |= VM_IO;
pos = (unsigned long)pdev->image_data;
@@ -1646,7 +1646,7 @@
char serial_number[30], *name;
/* Check if we can handle this device */
- Trace(TRACE_PROBE, "probe() called [%04X %04X], if %d\n",
+ Trace(TRACE_PROBE, "probe() called [%04X %04X], if %d\n",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
intf->altsetting->desc.bInterfaceNumber);
@@ -1770,11 +1770,11 @@
name = "Logitech QuickCam (res.)";
type_id = 730; /* Assuming CMOS */
break;
- default:
+ default:
return -ENODEV;
- break;
- }
- }
+ break;
+ }
+ }
else if (vendor_id == 0x055d) {
/* I don't know the difference between the C10 and the C30;
I suppose the difference is the sensor, but both cameras
@@ -1837,7 +1837,7 @@
return -ENODEV;
break;
}
-
+
}
else if (vendor_id == 0x0d81) {
switch(product_id) {
@@ -1856,7 +1856,7 @@
break;
}
}
- else
+ else
return -ENODEV; /* Not any of the know types; but the list keeps growing. */
memset(serial_number, 0, 30);
@@ -1880,9 +1880,9 @@
if (vendor_id == 0x046D && product_id == 0x08B5)
{
/* Logitech QuickCam Orbit
- The ranges have been determined experimentally; they may differ from cam to cam.
- Also, the exact ranges left-right and up-down are different for my cam
- */
+ The ranges have been determined experimentally; they may differ from cam to cam.
+ Also, the exact ranges left-right and up-down are different for my cam
+ */
pdev->angle_range.pan_min = -7000;
pdev->angle_range.pan_max = 7000;
pdev->angle_range.tilt_min = -3000;
@@ -1939,7 +1939,7 @@
}
/* occupy slot */
- if (hint < MAX_DEV_HINTS)
+ if (hint < MAX_DEV_HINTS)
device_hint[hint].pdev = pdev;
Trace(TRACE_PROBE, "probe() function returning struct at 0x%p.\n", pdev);
@@ -1968,13 +1968,13 @@
Err("pwc_disconnect() Woops: pointer mismatch udev/pdev.\n");
goto disconnect_out;
}
-#ifdef PWC_MAGIC
+#ifdef PWC_MAGIC
if (pdev->magic != PWC_MAGIC) {
Err("pwc_disconnect() Magic number failed. Consult your scrolls and try again.\n");
goto disconnect_out;
}
#endif
-
+
/* We got unplugged; this is signalled by an EPIPE error code */
if (pdev->vopen) {
Info("Disconnected while webcam is in use!\n");
@@ -2017,8 +2017,8 @@
}
-/*
- * Initialization code & module stuff
+/*
+ * Initialization code & module stuff
*/
static char size[10];
@@ -2168,7 +2168,7 @@
if (*dot != '\0') {
/* There's a serial number as well */
int k;
-
+
dot++;
k = 0;
while (*dot != ':' && k < 29) {
@@ -2178,18 +2178,18 @@
device_hint[i].serial_number[k] = '\0';
}
}
-#if PWC_DEBUG
+#if PWC_DEBUG
Debug("device_hint[%d]:\n", i);
Debug(" type : %d\n", device_hint[i].type);
Debug(" serial# : %s\n", device_hint[i].serial_number);
Debug(" node : %d\n", device_hint[i].device_node);
-#endif
+#endif
}
else
device_hint[i].type = 0; /* not filled */
} /* ..for MAX_DEV_HINTS */
- Trace(TRACE_PROBE, "Registering driver at address 0x%p.\n", &pwc_driver);
+ Trace(TRACE_PROBE, "Registering driver at address 0x%p.\n", &pwc_driver);
return usb_register(&pwc_driver);
}
diff --git a/drivers/media/video/pwc/pwc-ioctl.h b/drivers/media/video/pwc/pwc-ioctl.h
index 5f9cb08..784bc72 100644
--- a/drivers/media/video/pwc/pwc-ioctl.h
+++ b/drivers/media/video/pwc/pwc-ioctl.h
@@ -33,10 +33,10 @@
/*
Changes
2001/08/03 Alvarado Added ioctl constants to access methods for
- changing white balance and red/blue gains
+ changing white balance and red/blue gains
2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE
2003/12/13 Nemosft Unv. Some modifications to make interfacing to
- PWCX easier
+ PWCX easier
*/
/* These are private ioctl() commands, specific for the Philips webcams.
@@ -45,10 +45,10 @@
The #define names are built up like follows:
VIDIOC VIDeo IOCtl prefix
- PWC Philps WebCam
- G optional: Get
- S optional: Set
- ... the function
+ PWC Philps WebCam
+ G optional: Get
+ S optional: Set
+ ... the function
*/
@@ -94,7 +94,7 @@
{
char serial[30]; /* String with serial number. Contains terminating 0 */
};
-
+
/* pwc_whitebalance.mode values */
#define PWC_WB_INDOOR 0
#define PWC_WB_OUTDOOR 1
@@ -102,14 +102,14 @@
#define PWC_WB_MANUAL 3
#define PWC_WB_AUTO 4
-/* Used with VIDIOCPWC[SG]AWB (Auto White Balance).
+/* Used with VIDIOCPWC[SG]AWB (Auto White Balance).
Set mode to one of the PWC_WB_* values above.
- *red and *blue are the respective gains of these colour components inside
+ *red and *blue are the respective gains of these colour components inside
the camera; range 0..65535
- When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read;
+ When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read;
otherwise undefined.
'read_red' and 'read_blue' are read-only.
-*/
+*/
struct pwc_whitebalance
{
int mode;
@@ -117,9 +117,9 @@
int read_red, read_blue; /* R/O */
};
-/*
+/*
'control_speed' and 'control_delay' are used in automatic whitebalance mode,
- and tell the camera how fast it should react to changes in lighting, and
+ and tell the camera how fast it should react to changes in lighting, and
with how much delay. Valid values are 0..65535.
*/
struct pwc_wb_speed
@@ -148,11 +148,11 @@
#define PWC_MPT_TILT 0x02
#define PWC_MPT_TIMEOUT 0x04 /* for status */
-/* Set angles; when absolute != 0, the angle is absolute and the
+/* Set angles; when absolute != 0, the angle is absolute and the
driver calculates the relative offset for you. This can only
be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns
absolute angles.
- */
+ */
struct pwc_mpt_angles
{
int absolute; /* write-only */
@@ -179,14 +179,14 @@
/* This is used for out-of-kernel decompression. With it, you can get
all the necessary information to initialize and use the decompressor
routines in standalone applications.
- */
+ */
struct pwc_video_command
{
int type; /* camera type (645, 675, 730, etc.) */
int release; /* release number */
- int size; /* one of PSZ_* */
- int alternate;
+ int size; /* one of PSZ_* */
+ int alternate;
int command_len; /* length of USB video command */
unsigned char command_buf[13]; /* Actual USB video command */
int bandlength; /* >0 = compressed */
@@ -264,7 +264,7 @@
/* Flickerless mode; = 0 off, otherwise on */
#define VIDIOCPWCSFLICKER _IOW('v', 208, int)
-#define VIDIOCPWCGFLICKER _IOR('v', 208, int)
+#define VIDIOCPWCGFLICKER _IOR('v', 208, int)
/* Dynamic noise reduction; 0 off, 3 = high noise reduction */
#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int)
@@ -273,7 +273,7 @@
/* Real image size as used by the camera; tells you whether or not there's a gray border around the image */
#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize)
- /* Motorized pan & tilt functions */
+ /* Motorized pan & tilt functions */
#define VIDIOCPWCMPTRESET _IOW('v', 211, int)
#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range)
#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles)
diff --git a/drivers/media/video/pwc/pwc-kiara.c b/drivers/media/video/pwc/pwc-kiara.c
index c498c68..4c96037 100644
--- a/drivers/media/video/pwc/pwc-kiara.c
+++ b/drivers/media/video/pwc/pwc-kiara.c
@@ -48,270 +48,270 @@
{
/* 5 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 10 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 15 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 20 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 25 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 30 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
},
/* QSIF */
{
/* 5 fps */
{
- {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
- {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
- {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
- {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
+ {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
+ {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
+ {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
+ {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}},
},
/* 10 fps */
{
- {2, 291, 0, {0x1C, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0x01, 0x80}},
- {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
- {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
- {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
+ {2, 291, 0, {0x1C, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0x01, 0x80}},
+ {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
+ {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
+ {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}},
},
/* 15 fps */
{
- {3, 437, 0, {0x1B, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x01, 0x80}},
- {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}},
- {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}},
- {1, 192, 420, {0x13, 0xF4, 0x30, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x18, 0xC0, 0x00, 0x80}},
+ {3, 437, 0, {0x1B, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x01, 0x80}},
+ {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}},
+ {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}},
+ {1, 192, 420, {0x13, 0xF4, 0x30, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x18, 0xC0, 0x00, 0x80}},
},
/* 20 fps */
{
- {4, 589, 0, {0x1A, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4D, 0x02, 0x80}},
- {3, 448, 730, {0x12, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xC0, 0x01, 0x80}},
- {2, 292, 476, {0x12, 0xF4, 0x30, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0x01, 0x80}},
- {1, 192, 312, {0x12, 0xF4, 0x50, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0x00, 0x80}},
+ {4, 589, 0, {0x1A, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4D, 0x02, 0x80}},
+ {3, 448, 730, {0x12, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xC0, 0x01, 0x80}},
+ {2, 292, 476, {0x12, 0xF4, 0x30, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0x01, 0x80}},
+ {1, 192, 312, {0x12, 0xF4, 0x50, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0x00, 0x80}},
},
/* 25 fps */
{
- {5, 703, 0, {0x19, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x02, 0x80}},
- {3, 447, 610, {0x11, 0xF4, 0x30, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x28, 0xBF, 0x01, 0x80}},
- {2, 292, 398, {0x11, 0xF4, 0x50, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x28, 0x24, 0x01, 0x80}},
- {1, 193, 262, {0x11, 0xF4, 0x50, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x28, 0xC1, 0x00, 0x80}},
+ {5, 703, 0, {0x19, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x02, 0x80}},
+ {3, 447, 610, {0x11, 0xF4, 0x30, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x28, 0xBF, 0x01, 0x80}},
+ {2, 292, 398, {0x11, 0xF4, 0x50, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x28, 0x24, 0x01, 0x80}},
+ {1, 193, 262, {0x11, 0xF4, 0x50, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x28, 0xC1, 0x00, 0x80}},
},
/* 30 fps */
{
- {8, 874, 0, {0x18, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x6A, 0x03, 0x80}},
- {5, 704, 730, {0x10, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x28, 0xC0, 0x02, 0x80}},
- {3, 448, 492, {0x10, 0xF4, 0x30, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x28, 0xC0, 0x01, 0x80}},
- {2, 292, 320, {0x10, 0xF4, 0x50, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x28, 0x24, 0x01, 0x80}},
+ {8, 874, 0, {0x18, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x6A, 0x03, 0x80}},
+ {5, 704, 730, {0x10, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x28, 0xC0, 0x02, 0x80}},
+ {3, 448, 492, {0x10, 0xF4, 0x30, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x28, 0xC0, 0x01, 0x80}},
+ {2, 292, 320, {0x10, 0xF4, 0x50, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x28, 0x24, 0x01, 0x80}},
},
},
/* QCIF */
{
/* 5 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 10 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 15 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 20 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 25 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 30 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
},
/* SIF */
{
/* 5 fps */
{
- {4, 582, 0, {0x0D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x02, 0x80}},
- {3, 387, 1276, {0x05, 0xF4, 0x30, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x01, 0x80}},
- {2, 291, 960, {0x05, 0xF4, 0x30, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0x01, 0x80}},
- {1, 191, 630, {0x05, 0xF4, 0x50, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x18, 0xBF, 0x00, 0x80}},
+ {4, 582, 0, {0x0D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x02, 0x80}},
+ {3, 387, 1276, {0x05, 0xF4, 0x30, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x01, 0x80}},
+ {2, 291, 960, {0x05, 0xF4, 0x30, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0x01, 0x80}},
+ {1, 191, 630, {0x05, 0xF4, 0x50, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x18, 0xBF, 0x00, 0x80}},
},
/* 10 fps */
{
- {0, },
- {6, 775, 1278, {0x04, 0xF4, 0x30, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x03, 0x80}},
- {3, 447, 736, {0x04, 0xF4, 0x30, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x28, 0xBF, 0x01, 0x80}},
- {2, 292, 480, {0x04, 0xF4, 0x70, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x28, 0x24, 0x01, 0x80}},
+ {0, },
+ {6, 775, 1278, {0x04, 0xF4, 0x30, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x03, 0x80}},
+ {3, 447, 736, {0x04, 0xF4, 0x30, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x28, 0xBF, 0x01, 0x80}},
+ {2, 292, 480, {0x04, 0xF4, 0x70, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x28, 0x24, 0x01, 0x80}},
},
/* 15 fps */
{
- {0, },
- {9, 955, 1050, {0x03, 0xF4, 0x30, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x03, 0x80}},
- {4, 592, 650, {0x03, 0xF4, 0x30, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x50, 0x02, 0x80}},
- {3, 448, 492, {0x03, 0xF4, 0x50, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x38, 0xC0, 0x01, 0x80}},
+ {0, },
+ {9, 955, 1050, {0x03, 0xF4, 0x30, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x03, 0x80}},
+ {4, 592, 650, {0x03, 0xF4, 0x30, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x50, 0x02, 0x80}},
+ {3, 448, 492, {0x03, 0xF4, 0x50, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x38, 0xC0, 0x01, 0x80}},
},
/* 20 fps */
{
- {0, },
- {9, 958, 782, {0x02, 0xF4, 0x30, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x03, 0x80}},
- {5, 703, 574, {0x02, 0xF4, 0x50, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x02, 0x80}},
- {3, 446, 364, {0x02, 0xF4, 0x90, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x38, 0xBE, 0x01, 0x80}},
+ {0, },
+ {9, 958, 782, {0x02, 0xF4, 0x30, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x03, 0x80}},
+ {5, 703, 574, {0x02, 0xF4, 0x50, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x02, 0x80}},
+ {3, 446, 364, {0x02, 0xF4, 0x90, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x38, 0xBE, 0x01, 0x80}},
},
/* 25 fps */
{
- {0, },
- {9, 958, 654, {0x01, 0xF4, 0x30, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x03, 0x80}},
- {6, 776, 530, {0x01, 0xF4, 0x50, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x03, 0x80}},
- {4, 592, 404, {0x01, 0xF4, 0x70, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x48, 0x50, 0x02, 0x80}},
+ {0, },
+ {9, 958, 654, {0x01, 0xF4, 0x30, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x03, 0x80}},
+ {6, 776, 530, {0x01, 0xF4, 0x50, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x03, 0x80}},
+ {4, 592, 404, {0x01, 0xF4, 0x70, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x48, 0x50, 0x02, 0x80}},
},
/* 30 fps */
{
- {0, },
- {9, 957, 526, {0x00, 0xF4, 0x50, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x03, 0x80}},
- {6, 775, 426, {0x00, 0xF4, 0x70, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x03, 0x80}},
- {4, 590, 324, {0x00, 0x7A, 0x88, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x50, 0x4E, 0x02, 0x80}},
+ {0, },
+ {9, 957, 526, {0x00, 0xF4, 0x50, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x03, 0x80}},
+ {6, 775, 426, {0x00, 0xF4, 0x70, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x03, 0x80}},
+ {4, 590, 324, {0x00, 0x7A, 0x88, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x50, 0x4E, 0x02, 0x80}},
},
},
/* CIF */
{
/* 5 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 10 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 15 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 20 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 25 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 30 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
},
/* VGA */
{
/* 5 fps */
{
- {0, },
- {6, 773, 1272, {0x25, 0xF4, 0x30, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}},
- {4, 592, 976, {0x25, 0xF4, 0x50, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x02, 0x80}},
- {3, 448, 738, {0x25, 0xF4, 0x90, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x01, 0x80}},
+ {0, },
+ {6, 773, 1272, {0x25, 0xF4, 0x30, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}},
+ {4, 592, 976, {0x25, 0xF4, 0x50, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x02, 0x80}},
+ {3, 448, 738, {0x25, 0xF4, 0x90, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x01, 0x80}},
},
/* 10 fps */
{
- {0, },
- {9, 956, 788, {0x24, 0xF4, 0x70, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x03, 0x80}},
- {6, 776, 640, {0x24, 0xF4, 0xB0, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x03, 0x80}},
- {4, 592, 488, {0x24, 0x7A, 0xE8, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x02, 0x80}},
+ {0, },
+ {9, 956, 788, {0x24, 0xF4, 0x70, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x03, 0x80}},
+ {6, 776, 640, {0x24, 0xF4, 0xB0, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x03, 0x80}},
+ {4, 592, 488, {0x24, 0x7A, 0xE8, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x02, 0x80}},
},
/* 15 fps */
{
- {0, },
- {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}},
- {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}},
- {8, 895, 492, {0x23, 0x7A, 0xE8, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x03, 0x80}},
+ {0, },
+ {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}},
+ {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}},
+ {8, 895, 492, {0x23, 0x7A, 0xE8, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x03, 0x80}},
},
/* 20 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 25 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 30 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
},
};
diff --git a/drivers/media/video/pwc/pwc-misc.c b/drivers/media/video/pwc/pwc-misc.c
index b7a4bd3..58fe797 100644
--- a/drivers/media/video/pwc/pwc-misc.c
+++ b/drivers/media/video/pwc/pwc-misc.c
@@ -1,4 +1,4 @@
-/* Linux driver for Philips webcam
+/* Linux driver for Philips webcam
Various miscellaneous functions and tables.
(C) 1999-2003 Nemosoft Unv.
(C) 2004 Luc Saillard (luc@saillard.org)
@@ -44,17 +44,17 @@
int i, find;
/* Make sure we don't go beyond our max size.
- NB: we have different limits for RAW and normal modes. In case
- you don't have the decompressor loaded or use RAW mode,
- the maximum viewable size is smaller.
- */
+ NB: we have different limits for RAW and normal modes. In case
+ you don't have the decompressor loaded or use RAW mode,
+ the maximum viewable size is smaller.
+ */
if (pdev->vpalette == VIDEO_PALETTE_RAW)
{
if (width > pdev->abs_max.x || height > pdev->abs_max.y)
{
Debug("VIDEO_PALETTE_RAW: going beyond abs_max.\n");
- return -1;
- }
+ return -1;
+ }
}
else
{
@@ -88,8 +88,8 @@
pdev->view_min.y = 96;
pdev->view_max.x = 352;
pdev->view_max.y = 288;
- pdev->abs_max.x = 352;
- pdev->abs_max.y = 288;
+ pdev->abs_max.x = 352;
+ pdev->abs_max.y = 288;
pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QCIF | 1 << PSZ_CIF;
pdev->vcinterface = 2;
pdev->vendpoint = 4;
@@ -105,8 +105,8 @@
pdev->view_max.x = 640;
pdev->view_max.y = 480;
pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QSIF | 1 << PSZ_QCIF | 1 << PSZ_SIF | 1 << PSZ_CIF | 1 << PSZ_VGA;
- pdev->abs_max.x = 640;
- pdev->abs_max.y = 480;
+ pdev->abs_max.x = 640;
+ pdev->abs_max.y = 480;
pdev->vcinterface = 3;
pdev->vendpoint = 4;
pdev->frame_header_size = 0;
@@ -121,8 +121,8 @@
pdev->view_max.x = 640;
pdev->view_max.y = 480;
pdev->image_mask = 1 << PSZ_QSIF | 1 << PSZ_SIF | 1 << PSZ_VGA;
- pdev->abs_max.x = 640;
- pdev->abs_max.y = 480;
+ pdev->abs_max.x = 640;
+ pdev->abs_max.y = 480;
pdev->vcinterface = 3;
pdev->vendpoint = 5;
pdev->frame_header_size = TOUCAM_HEADER_SIZE;
diff --git a/drivers/media/video/pwc/pwc-nala.h b/drivers/media/video/pwc/pwc-nala.h
index e6c5cb6..168c73e 100644
--- a/drivers/media/video/pwc/pwc-nala.h
+++ b/drivers/media/video/pwc/pwc-nala.h
@@ -54,7 +54,7 @@
{0},
},
/* VGA */
- {
+ {
{0},
{0},
{0},
diff --git a/drivers/media/video/pwc/pwc-timon.c b/drivers/media/video/pwc/pwc-timon.c
index dee9671..175250d 100644
--- a/drivers/media/video/pwc/pwc-timon.c
+++ b/drivers/media/video/pwc/pwc-timon.c
@@ -46,270 +46,270 @@
{
/* 5 fps */
{
- {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
- {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
- {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
- {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
+ {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
+ {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
+ {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
+ {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}},
},
/* 10 fps */
{
- {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
- {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
- {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
- {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
+ {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
+ {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
+ {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
+ {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}},
},
/* 15 fps */
{
- {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
- {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
- {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
- {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
+ {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
+ {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
+ {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
+ {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}},
},
/* 20 fps */
{
- {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
- {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
- {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
- {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
+ {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
+ {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
+ {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
+ {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}},
},
/* 25 fps */
{
- {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
- {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
- {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
- {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
+ {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
+ {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
+ {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
+ {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}},
},
/* 30 fps */
{
- {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
- {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
- {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
- {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
+ {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
+ {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
+ {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
+ {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}},
},
},
/* QSIF */
{
/* 5 fps */
{
- {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
- {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
- {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
- {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
+ {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
+ {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
+ {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
+ {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}},
},
/* 10 fps */
{
- {2, 291, 0, {0x2C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0xA1, 0xC0, 0x02}},
- {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
- {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
- {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
+ {2, 291, 0, {0x2C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0xA1, 0xC0, 0x02}},
+ {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
+ {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
+ {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
},
/* 15 fps */
{
- {3, 437, 0, {0x2B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x6D, 0xC0, 0x02}},
- {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
- {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
- {1, 191, 420, {0x2B, 0xF4, 0x0D, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
+ {3, 437, 0, {0x2B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x6D, 0xC0, 0x02}},
+ {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
+ {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
+ {1, 191, 420, {0x2B, 0xF4, 0x0D, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x08, 0xBF, 0xF4, 0xC0, 0x02}},
},
/* 20 fps */
{
- {4, 588, 0, {0x2A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4C, 0x52, 0xC0, 0x02}},
- {3, 447, 730, {0x2A, 0xF4, 0x05, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 292, 476, {0x2A, 0xF4, 0x0D, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
- {1, 192, 312, {0x2A, 0xF4, 0x1D, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}},
+ {4, 588, 0, {0x2A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4C, 0x52, 0xC0, 0x02}},
+ {3, 447, 730, {0x2A, 0xF4, 0x05, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
+ {2, 292, 476, {0x2A, 0xF4, 0x0D, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
+ {1, 192, 312, {0x2A, 0xF4, 0x1D, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}},
},
/* 25 fps */
{
- {5, 703, 0, {0x29, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x42, 0xC0, 0x02}},
- {3, 447, 610, {0x29, 0xF4, 0x05, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 292, 398, {0x29, 0xF4, 0x0D, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
- {1, 192, 262, {0x29, 0xF4, 0x25, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}},
+ {5, 703, 0, {0x29, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x42, 0xC0, 0x02}},
+ {3, 447, 610, {0x29, 0xF4, 0x05, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
+ {2, 292, 398, {0x29, 0xF4, 0x0D, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
+ {1, 192, 262, {0x29, 0xF4, 0x25, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}},
},
/* 30 fps */
{
- {8, 873, 0, {0x28, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x69, 0x37, 0xC0, 0x02}},
- {5, 704, 774, {0x28, 0xF4, 0x05, 0x18, 0x21, 0x17, 0x59, 0x0F, 0x18, 0xC0, 0x42, 0xC0, 0x02}},
- {3, 448, 492, {0x28, 0xF4, 0x05, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x18, 0xC0, 0x69, 0xC0, 0x02}},
- {2, 291, 320, {0x28, 0xF4, 0x1D, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}},
+ {8, 873, 0, {0x28, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x69, 0x37, 0xC0, 0x02}},
+ {5, 704, 774, {0x28, 0xF4, 0x05, 0x18, 0x21, 0x17, 0x59, 0x0F, 0x18, 0xC0, 0x42, 0xC0, 0x02}},
+ {3, 448, 492, {0x28, 0xF4, 0x05, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x18, 0xC0, 0x69, 0xC0, 0x02}},
+ {2, 291, 320, {0x28, 0xF4, 0x1D, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}},
},
},
/* QCIF */
{
/* 5 fps */
{
- {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
- {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
- {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
- {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
+ {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
+ {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
+ {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
+ {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}},
},
/* 10 fps */
{
- {3, 385, 0, {0x0C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x81, 0x79, 0xC0, 0x02}},
- {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
- {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
- {1, 194, 532, {0x0C, 0xF4, 0x05, 0x10, 0x9A, 0x0F, 0xBE, 0x1B, 0x08, 0xC2, 0xF0, 0xC0, 0x02}},
+ {3, 385, 0, {0x0C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x81, 0x79, 0xC0, 0x02}},
+ {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
+ {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}},
+ {1, 194, 532, {0x0C, 0xF4, 0x05, 0x10, 0x9A, 0x0F, 0xBE, 0x1B, 0x08, 0xC2, 0xF0, 0xC0, 0x02}},
},
/* 15 fps */
{
- {4, 577, 0, {0x0B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x41, 0x52, 0xC0, 0x02}},
- {3, 447, 818, {0x0B, 0xF4, 0x05, 0x19, 0x89, 0x18, 0xAD, 0x0F, 0x10, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 292, 534, {0x0B, 0xF4, 0x05, 0x10, 0xA3, 0x0F, 0xC7, 0x19, 0x10, 0x24, 0xA1, 0xC0, 0x02}},
- {1, 195, 356, {0x0B, 0xF4, 0x15, 0x0B, 0x11, 0x0A, 0x35, 0x1E, 0x10, 0xC3, 0xF0, 0xC0, 0x02}},
+ {4, 577, 0, {0x0B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x41, 0x52, 0xC0, 0x02}},
+ {3, 447, 818, {0x0B, 0xF4, 0x05, 0x19, 0x89, 0x18, 0xAD, 0x0F, 0x10, 0xBF, 0x69, 0xC0, 0x02}},
+ {2, 292, 534, {0x0B, 0xF4, 0x05, 0x10, 0xA3, 0x0F, 0xC7, 0x19, 0x10, 0x24, 0xA1, 0xC0, 0x02}},
+ {1, 195, 356, {0x0B, 0xF4, 0x15, 0x0B, 0x11, 0x0A, 0x35, 0x1E, 0x10, 0xC3, 0xF0, 0xC0, 0x02}},
},
/* 20 fps */
{
- {6, 776, 0, {0x0A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x08, 0x3F, 0xC0, 0x02}},
- {4, 591, 804, {0x0A, 0xF4, 0x05, 0x19, 0x1E, 0x18, 0x42, 0x0F, 0x18, 0x4F, 0x4E, 0xC0, 0x02}},
- {3, 447, 608, {0x0A, 0xF4, 0x05, 0x12, 0xFD, 0x12, 0x21, 0x15, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 291, 396, {0x0A, 0xF4, 0x15, 0x0C, 0x5E, 0x0B, 0x82, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}},
+ {6, 776, 0, {0x0A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x08, 0x3F, 0xC0, 0x02}},
+ {4, 591, 804, {0x0A, 0xF4, 0x05, 0x19, 0x1E, 0x18, 0x42, 0x0F, 0x18, 0x4F, 0x4E, 0xC0, 0x02}},
+ {3, 447, 608, {0x0A, 0xF4, 0x05, 0x12, 0xFD, 0x12, 0x21, 0x15, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
+ {2, 291, 396, {0x0A, 0xF4, 0x15, 0x0C, 0x5E, 0x0B, 0x82, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}},
},
/* 25 fps */
{
- {9, 928, 0, {0x09, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xA0, 0x33, 0xC0, 0x02}},
- {5, 703, 800, {0x09, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x10, 0x18, 0xBF, 0x42, 0xC0, 0x02}},
- {3, 447, 508, {0x09, 0xF4, 0x0D, 0x0F, 0xD2, 0x0E, 0xF6, 0x1B, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
- {2, 292, 332, {0x09, 0xF4, 0x1D, 0x0A, 0x5A, 0x09, 0x7E, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
+ {9, 928, 0, {0x09, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xA0, 0x33, 0xC0, 0x02}},
+ {5, 703, 800, {0x09, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x10, 0x18, 0xBF, 0x42, 0xC0, 0x02}},
+ {3, 447, 508, {0x09, 0xF4, 0x0D, 0x0F, 0xD2, 0x0E, 0xF6, 0x1B, 0x18, 0xBF, 0x69, 0xC0, 0x02}},
+ {2, 292, 332, {0x09, 0xF4, 0x1D, 0x0A, 0x5A, 0x09, 0x7E, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}},
},
/* 30 fps */
{
- {0, },
- {9, 956, 876, {0x08, 0xF4, 0x05, 0x1B, 0x58, 0x1A, 0x7C, 0x0E, 0x20, 0xBC, 0x33, 0x10, 0x02}},
- {4, 592, 542, {0x08, 0xF4, 0x05, 0x10, 0xE4, 0x10, 0x08, 0x17, 0x20, 0x50, 0x4E, 0x10, 0x02}},
- {2, 291, 266, {0x08, 0xF4, 0x25, 0x08, 0x48, 0x07, 0x6C, 0x1E, 0x20, 0x23, 0xA1, 0x10, 0x02}},
+ {0, },
+ {9, 956, 876, {0x08, 0xF4, 0x05, 0x1B, 0x58, 0x1A, 0x7C, 0x0E, 0x20, 0xBC, 0x33, 0x10, 0x02}},
+ {4, 592, 542, {0x08, 0xF4, 0x05, 0x10, 0xE4, 0x10, 0x08, 0x17, 0x20, 0x50, 0x4E, 0x10, 0x02}},
+ {2, 291, 266, {0x08, 0xF4, 0x25, 0x08, 0x48, 0x07, 0x6C, 0x1E, 0x20, 0x23, 0xA1, 0x10, 0x02}},
},
},
/* SIF */
{
/* 5 fps */
{
- {4, 582, 0, {0x35, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x52, 0x60, 0x02}},
- {3, 387, 1276, {0x35, 0xF4, 0x05, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x79, 0x60, 0x02}},
- {2, 291, 960, {0x35, 0xF4, 0x0D, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0xA1, 0x60, 0x02}},
- {1, 191, 630, {0x35, 0xF4, 0x1D, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x08, 0xBF, 0xF4, 0x60, 0x02}},
+ {4, 582, 0, {0x35, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x52, 0x60, 0x02}},
+ {3, 387, 1276, {0x35, 0xF4, 0x05, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x79, 0x60, 0x02}},
+ {2, 291, 960, {0x35, 0xF4, 0x0D, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0xA1, 0x60, 0x02}},
+ {1, 191, 630, {0x35, 0xF4, 0x1D, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x08, 0xBF, 0xF4, 0x60, 0x02}},
},
/* 10 fps */
{
- {0, },
- {6, 775, 1278, {0x34, 0xF4, 0x05, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x3F, 0x10, 0x02}},
- {3, 447, 736, {0x34, 0xF4, 0x15, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x18, 0xBF, 0x69, 0x10, 0x02}},
- {2, 291, 480, {0x34, 0xF4, 0x2D, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x18, 0x23, 0xA1, 0x10, 0x02}},
+ {0, },
+ {6, 775, 1278, {0x34, 0xF4, 0x05, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x3F, 0x10, 0x02}},
+ {3, 447, 736, {0x34, 0xF4, 0x15, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x18, 0xBF, 0x69, 0x10, 0x02}},
+ {2, 291, 480, {0x34, 0xF4, 0x2D, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x18, 0x23, 0xA1, 0x10, 0x02}},
},
/* 15 fps */
{
- {0, },
- {9, 955, 1050, {0x33, 0xF4, 0x05, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x33, 0x10, 0x02}},
- {4, 591, 650, {0x33, 0xF4, 0x15, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x4F, 0x4E, 0x10, 0x02}},
- {3, 448, 492, {0x33, 0xF4, 0x25, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x28, 0xC0, 0x69, 0x10, 0x02}},
+ {0, },
+ {9, 955, 1050, {0x33, 0xF4, 0x05, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x33, 0x10, 0x02}},
+ {4, 591, 650, {0x33, 0xF4, 0x15, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x4F, 0x4E, 0x10, 0x02}},
+ {3, 448, 492, {0x33, 0xF4, 0x25, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x28, 0xC0, 0x69, 0x10, 0x02}},
},
/* 20 fps */
{
- {0, },
- {9, 958, 782, {0x32, 0xF4, 0x0D, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x33, 0xD0, 0x02}},
- {5, 703, 574, {0x32, 0xF4, 0x1D, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x42, 0xD0, 0x02}},
- {3, 446, 364, {0x32, 0xF4, 0x3D, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x30, 0xBE, 0x69, 0xD0, 0x02}},
+ {0, },
+ {9, 958, 782, {0x32, 0xF4, 0x0D, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x33, 0xD0, 0x02}},
+ {5, 703, 574, {0x32, 0xF4, 0x1D, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x42, 0xD0, 0x02}},
+ {3, 446, 364, {0x32, 0xF4, 0x3D, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x30, 0xBE, 0x69, 0xD0, 0x02}},
},
/* 25 fps */
{
- {0, },
- {9, 958, 654, {0x31, 0xF4, 0x15, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x33, 0x90, 0x02}},
- {6, 776, 530, {0x31, 0xF4, 0x25, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x3F, 0x90, 0x02}},
- {4, 592, 404, {0x31, 0xF4, 0x35, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x38, 0x50, 0x4E, 0x90, 0x02}},
+ {0, },
+ {9, 958, 654, {0x31, 0xF4, 0x15, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x33, 0x90, 0x02}},
+ {6, 776, 530, {0x31, 0xF4, 0x25, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x3F, 0x90, 0x02}},
+ {4, 592, 404, {0x31, 0xF4, 0x35, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x38, 0x50, 0x4E, 0x90, 0x02}},
},
/* 30 fps */
{
- {0, },
- {9, 957, 526, {0x30, 0xF4, 0x25, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x33, 0x60, 0x02}},
- {6, 775, 426, {0x30, 0xF4, 0x35, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x3F, 0x60, 0x02}},
- {4, 590, 324, {0x30, 0x7A, 0x4B, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x40, 0x4E, 0x52, 0x60, 0x02}},
+ {0, },
+ {9, 957, 526, {0x30, 0xF4, 0x25, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x33, 0x60, 0x02}},
+ {6, 775, 426, {0x30, 0xF4, 0x35, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x3F, 0x60, 0x02}},
+ {4, 590, 324, {0x30, 0x7A, 0x4B, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x40, 0x4E, 0x52, 0x60, 0x02}},
},
},
/* CIF */
{
/* 5 fps */
{
- {6, 771, 0, {0x15, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x03, 0x3F, 0x80, 0x02}},
- {4, 465, 1278, {0x15, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x03, 0x18, 0xD1, 0x65, 0x80, 0x02}},
- {2, 291, 800, {0x15, 0xF4, 0x15, 0x18, 0xF4, 0x17, 0x3C, 0x05, 0x18, 0x23, 0xA1, 0x80, 0x02}},
- {1, 193, 528, {0x15, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x18, 0xC1, 0xF4, 0x80, 0x02}},
+ {6, 771, 0, {0x15, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x03, 0x3F, 0x80, 0x02}},
+ {4, 465, 1278, {0x15, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x03, 0x18, 0xD1, 0x65, 0x80, 0x02}},
+ {2, 291, 800, {0x15, 0xF4, 0x15, 0x18, 0xF4, 0x17, 0x3C, 0x05, 0x18, 0x23, 0xA1, 0x80, 0x02}},
+ {1, 193, 528, {0x15, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x18, 0xC1, 0xF4, 0x80, 0x02}},
},
/* 10 fps */
{
- {0, },
- {9, 932, 1278, {0x14, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x04, 0x30, 0xA4, 0x33, 0x10, 0x02}},
- {4, 591, 812, {0x14, 0xF4, 0x15, 0x19, 0x56, 0x17, 0x9E, 0x06, 0x28, 0x4F, 0x4E, 0x10, 0x02}},
- {2, 291, 400, {0x14, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x28, 0x23, 0xA1, 0x10, 0x02}},
+ {0, },
+ {9, 932, 1278, {0x14, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x04, 0x30, 0xA4, 0x33, 0x10, 0x02}},
+ {4, 591, 812, {0x14, 0xF4, 0x15, 0x19, 0x56, 0x17, 0x9E, 0x06, 0x28, 0x4F, 0x4E, 0x10, 0x02}},
+ {2, 291, 400, {0x14, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x28, 0x23, 0xA1, 0x10, 0x02}},
},
/* 15 fps */
{
- {0, },
- {9, 956, 876, {0x13, 0xF4, 0x0D, 0x1B, 0x58, 0x19, 0xA0, 0x05, 0x38, 0xBC, 0x33, 0x60, 0x02}},
- {5, 703, 644, {0x13, 0xF4, 0x1D, 0x14, 0x1C, 0x12, 0x64, 0x08, 0x38, 0xBF, 0x42, 0x60, 0x02}},
- {3, 448, 410, {0x13, 0xF4, 0x3D, 0x0C, 0xC4, 0x0B, 0x0C, 0x0E, 0x38, 0xC0, 0x69, 0x60, 0x02}},
+ {0, },
+ {9, 956, 876, {0x13, 0xF4, 0x0D, 0x1B, 0x58, 0x19, 0xA0, 0x05, 0x38, 0xBC, 0x33, 0x60, 0x02}},
+ {5, 703, 644, {0x13, 0xF4, 0x1D, 0x14, 0x1C, 0x12, 0x64, 0x08, 0x38, 0xBF, 0x42, 0x60, 0x02}},
+ {3, 448, 410, {0x13, 0xF4, 0x3D, 0x0C, 0xC4, 0x0B, 0x0C, 0x0E, 0x38, 0xC0, 0x69, 0x60, 0x02}},
},
/* 20 fps */
{
- {0, },
- {9, 956, 650, {0x12, 0xF4, 0x1D, 0x14, 0x4A, 0x12, 0x92, 0x09, 0x48, 0xBC, 0x33, 0x10, 0x03}},
- {6, 776, 528, {0x12, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x40, 0x08, 0x3F, 0x10, 0x03}},
- {4, 591, 402, {0x12, 0xF4, 0x3D, 0x0C, 0x8F, 0x0A, 0xD7, 0x0E, 0x40, 0x4F, 0x4E, 0x10, 0x03}},
+ {0, },
+ {9, 956, 650, {0x12, 0xF4, 0x1D, 0x14, 0x4A, 0x12, 0x92, 0x09, 0x48, 0xBC, 0x33, 0x10, 0x03}},
+ {6, 776, 528, {0x12, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x40, 0x08, 0x3F, 0x10, 0x03}},
+ {4, 591, 402, {0x12, 0xF4, 0x3D, 0x0C, 0x8F, 0x0A, 0xD7, 0x0E, 0x40, 0x4F, 0x4E, 0x10, 0x03}},
},
/* 25 fps */
{
- {0, },
- {9, 956, 544, {0x11, 0xF4, 0x25, 0x10, 0xF4, 0x0F, 0x3C, 0x0A, 0x48, 0xBC, 0x33, 0xC0, 0x02}},
- {7, 840, 478, {0x11, 0xF4, 0x2D, 0x0E, 0xEB, 0x0D, 0x33, 0x0B, 0x48, 0x48, 0x3B, 0xC0, 0x02}},
- {5, 703, 400, {0x11, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x48, 0xBF, 0x42, 0xC0, 0x02}},
+ {0, },
+ {9, 956, 544, {0x11, 0xF4, 0x25, 0x10, 0xF4, 0x0F, 0x3C, 0x0A, 0x48, 0xBC, 0x33, 0xC0, 0x02}},
+ {7, 840, 478, {0x11, 0xF4, 0x2D, 0x0E, 0xEB, 0x0D, 0x33, 0x0B, 0x48, 0x48, 0x3B, 0xC0, 0x02}},
+ {5, 703, 400, {0x11, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x48, 0xBF, 0x42, 0xC0, 0x02}},
},
/* 30 fps */
{
- {0, },
- {9, 956, 438, {0x10, 0xF4, 0x35, 0x0D, 0xAC, 0x0B, 0xF4, 0x0D, 0x50, 0xBC, 0x33, 0x10, 0x02}},
- {7, 838, 384, {0x10, 0xF4, 0x45, 0x0B, 0xFD, 0x0A, 0x45, 0x0F, 0x50, 0x46, 0x3B, 0x10, 0x02}},
- {6, 773, 354, {0x10, 0x7A, 0x4B, 0x0B, 0x0C, 0x09, 0x80, 0x10, 0x50, 0x05, 0x3F, 0x10, 0x02}},
+ {0, },
+ {9, 956, 438, {0x10, 0xF4, 0x35, 0x0D, 0xAC, 0x0B, 0xF4, 0x0D, 0x50, 0xBC, 0x33, 0x10, 0x02}},
+ {7, 838, 384, {0x10, 0xF4, 0x45, 0x0B, 0xFD, 0x0A, 0x45, 0x0F, 0x50, 0x46, 0x3B, 0x10, 0x02}},
+ {6, 773, 354, {0x10, 0x7A, 0x4B, 0x0B, 0x0C, 0x09, 0x80, 0x10, 0x50, 0x05, 0x3F, 0x10, 0x02}},
},
},
/* VGA */
{
/* 5 fps */
{
- {0, },
- {6, 773, 1272, {0x1D, 0xF4, 0x15, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x3F, 0x10, 0x02}},
- {4, 592, 976, {0x1D, 0xF4, 0x25, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x4E, 0x10, 0x02}},
- {3, 448, 738, {0x1D, 0xF4, 0x3D, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x69, 0x10, 0x02}},
+ {0, },
+ {6, 773, 1272, {0x1D, 0xF4, 0x15, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x3F, 0x10, 0x02}},
+ {4, 592, 976, {0x1D, 0xF4, 0x25, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x4E, 0x10, 0x02}},
+ {3, 448, 738, {0x1D, 0xF4, 0x3D, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x69, 0x10, 0x02}},
},
/* 10 fps */
{
- {0, },
- {9, 956, 788, {0x1C, 0xF4, 0x35, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x33, 0x10, 0x02}},
- {6, 776, 640, {0x1C, 0x7A, 0x53, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x3F, 0x10, 0x02}},
- {4, 592, 488, {0x1C, 0x7A, 0x6B, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x4E, 0x10, 0x02}},
+ {0, },
+ {9, 956, 788, {0x1C, 0xF4, 0x35, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x33, 0x10, 0x02}},
+ {6, 776, 640, {0x1C, 0x7A, 0x53, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x3F, 0x10, 0x02}},
+ {4, 592, 488, {0x1C, 0x7A, 0x6B, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x4E, 0x10, 0x02}},
},
/* 15 fps */
{
- {0, },
- {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}},
- {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}},
- {8, 895, 492, {0x1B, 0x7A, 0x6B, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x37, 0x80, 0x02}},
+ {0, },
+ {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}},
+ {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}},
+ {8, 895, 492, {0x1B, 0x7A, 0x6B, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x37, 0x80, 0x02}},
},
/* 20 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 25 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
/* 30 fps */
{
- {0, },
- {0, },
- {0, },
- {0, },
+ {0, },
+ {0, },
+ {0, },
+ {0, },
},
},
};
diff --git a/drivers/media/video/pwc/pwc-uncompress.c b/drivers/media/video/pwc/pwc-uncompress.c
index ef4204e..b37a89a 100644
--- a/drivers/media/video/pwc/pwc-uncompress.c
+++ b/drivers/media/video/pwc/pwc-uncompress.c
@@ -109,9 +109,9 @@
in planar format immediately.
*/
int flags;
-
- flags = PWCX_FLAG_PLANAR;
- if (pdev->vsize == PSZ_VGA && pdev->vframes == 5 && pdev->vsnapshot)
+
+ flags = PWCX_FLAG_PLANAR;
+ if (pdev->vsize == PSZ_VGA && pdev->vframes == 5 && pdev->vsnapshot)
{
printk(KERN_ERR "pwc: Mode Bayer is not supported for now\n");
flags |= PWCX_FLAG_BAYER;
diff --git a/drivers/media/video/pwc/pwc-uncompress.h b/drivers/media/video/pwc/pwc-uncompress.h
index d3b9250..f75e1b6 100644
--- a/drivers/media/video/pwc/pwc-uncompress.h
+++ b/drivers/media/video/pwc/pwc-uncompress.h
@@ -24,7 +24,7 @@
/* This file is the bridge between the kernel module and the plugin; it
describes the structures and datatypes used in both modules. Any
- significant change should be reflected by increasing the
+ significant change should be reflected by increasing the
pwc_decompressor_version major number.
*/
#ifndef PWC_UNCOMPRESS_H
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 6dd76bb..1b0ee0c 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -123,7 +123,7 @@
#endif
/* Pointer to our usb_device */
struct usb_device *udev;
-
+
int type; /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
int release; /* release number */
int features; /* feature bits */
@@ -149,7 +149,7 @@
char vsnapshot; /* snapshot mode */
char vsync; /* used by isoc handler */
char vmirror; /* for ToUCaM series */
-
+
int cmd_len;
unsigned char cmd_buf[13];
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index a9f3cf0..531e946 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -71,7 +71,7 @@
#define NUM_BUFS 8
#define IF_NAME "SAA5249"
-static const int disp_modes[8][3] =
+static const int disp_modes[8][3] =
{
{ 0x46, 0x03, 0x03 }, /* DISPOFF */
{ 0x46, 0xcc, 0xcc }, /* DISPNORM */
@@ -150,8 +150,8 @@
client=kmalloc(sizeof(*client), GFP_KERNEL);
if(client==NULL)
return -ENOMEM;
- client_template.adapter = adap;
- client_template.addr = addr;
+ client_template.adapter = adap;
+ client_template.addr = addr;
memcpy(client, &client_template, sizeof(*client));
t = kzalloc(sizeof(*t), GFP_KERNEL);
if(t==NULL)
@@ -161,11 +161,11 @@
}
strlcpy(client->name, IF_NAME, I2C_NAME_SIZE);
mutex_init(&t->lock);
-
+
/*
* Now create a video4linux device
*/
-
+
vd = kmalloc(sizeof(struct video_device), GFP_KERNEL);
if(vd==NULL)
{
@@ -175,8 +175,8 @@
}
i2c_set_clientdata(client, vd);
memcpy(vd, &saa_template, sizeof(*vd));
-
- for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++)
+
+ for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++)
{
memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf));
memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs));
@@ -186,9 +186,9 @@
t->vdau[pgbuf].stopped = TRUE;
t->is_searching[pgbuf] = FALSE;
}
- vd->priv=t;
-
-
+ vd->priv=t;
+
+
/*
* Register it
*/
@@ -208,7 +208,7 @@
/*
* We do most of the hard work when we become a device on the i2c.
*/
-
+
static int saa5249_probe(struct i2c_adapter *adap)
{
if (adap->class & I2C_CLASS_TV_ANALOG)
@@ -229,7 +229,7 @@
/* new I2C driver support */
-static struct i2c_driver i2c_driver_videotext =
+static struct i2c_driver i2c_driver_videotext =
{
.driver = {
.name = IF_NAME, /* name */
@@ -249,7 +249,7 @@
* delay may be longer.
*/
-static void jdelay(unsigned long delay)
+static void jdelay(unsigned long delay)
{
sigset_t oldblocked = current->blocked;
@@ -269,14 +269,14 @@
/*
* I2C interfaces
*/
-
-static int i2c_sendbuf(struct saa5249_device *t, int reg, int count, u8 *data)
+
+static int i2c_sendbuf(struct saa5249_device *t, int reg, int count, u8 *data)
{
char buf[64];
-
+
buf[0] = reg;
memcpy(buf+1, data, count);
-
+
if(i2c_master_send(t->client, buf, count+1)==count+1)
return 0;
return -1;
@@ -289,7 +289,7 @@
int ct=0;
va_list argp;
va_start(argp,t);
-
+
while((v=va_arg(argp,int))!=-1)
buf[ct++]=v;
return i2c_sendbuf(t, buf[0], ct-1, buf+1);
@@ -301,7 +301,7 @@
* Returns -1 if I²C-device didn't send acknowledge, 0 otherwise
*/
-static int i2c_getdata(struct saa5249_device *t, int count, u8 *buf)
+static int i2c_getdata(struct saa5249_device *t, int count, u8 *buf)
{
if(i2c_master_recv(t->client, buf, count)!=count)
return -1;
@@ -320,9 +320,9 @@
struct video_device *vd = video_devdata(file);
struct saa5249_device *t=vd->priv;
- switch(cmd)
+ switch(cmd)
{
- case VTXIOCGETINFO:
+ case VTXIOCGETINFO:
{
vtx_info_t *info = arg;
info->version_major = VTX_VER_MAJ;
@@ -332,10 +332,10 @@
return 0;
}
- case VTXIOCCLRPAGE:
+ case VTXIOCCLRPAGE:
{
vtx_pagereq_t *req = arg;
-
+
if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
return -EINVAL;
memset(t->vdau[req->pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf));
@@ -343,17 +343,17 @@
return 0;
}
- case VTXIOCCLRFOUND:
+ case VTXIOCCLRFOUND:
{
vtx_pagereq_t *req = arg;
-
+
if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
return -EINVAL;
t->vdau[req->pgbuf].clrfound = TRUE;
return 0;
}
- case VTXIOCPAGEREQ:
+ case VTXIOCPAGEREQ:
{
vtx_pagereq_t *req = arg;
if (!(req->pagemask & PGMASK_PAGE))
@@ -381,7 +381,7 @@
return 0;
}
- case VTXIOCGETSTAT:
+ case VTXIOCGETSTAT:
{
vtx_pagereq_t *req = arg;
u8 infobits[10];
@@ -390,7 +390,7 @@
if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS)
return -EINVAL;
- if (!t->vdau[req->pgbuf].stopped)
+ if (!t->vdau[req->pgbuf].stopped)
{
if (i2c_senddata(t, 2, 0, -1) ||
i2c_sendbuf(t, 3, sizeof(t->vdau[0].sregs), t->vdau[req->pgbuf].sregs) ||
@@ -403,7 +403,7 @@
return -EIO;
if (!(infobits[8] & 0x10) && !(infobits[7] & 0xf0) && /* check FOUND-bit */
- (memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) ||
+ (memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) ||
time_after_eq(jiffies, t->vdau[req->pgbuf].expire)))
{ /* check if new page arrived */
if (i2c_senddata(t, 8, 0, 0, 0, -1) ||
@@ -411,7 +411,7 @@
return -EIO;
t->vdau[req->pgbuf].expire = jiffies + PGBUF_EXPIRE;
memset(t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE, ' ', VTX_VIRTUALSIZE - VTX_PAGESIZE);
- if (t->virtual_mode)
+ if (t->virtual_mode)
{
/* Packet X/24 */
if (i2c_senddata(t, 8, 0, 0x20, 0, -1) ||
@@ -459,9 +459,9 @@
info.notfound = !!(infobits[8] & 0x10);
info.pblf = !!(infobits[9] & 0x20);
info.hamming = 0;
- for (a = 0; a <= 7; a++)
+ for (a = 0; a <= 7; a++)
{
- if (infobits[a] & 0xf0)
+ if (infobits[a] & 0xf0)
{
info.hamming = 1;
break;
@@ -471,14 +471,14 @@
info.notfound = 1;
if(copy_to_user(req->buffer, &info, sizeof(vtx_pageinfo_t)))
return -EFAULT;
- if (!info.hamming && !info.notfound)
+ if (!info.hamming && !info.notfound)
{
t->is_searching[req->pgbuf] = FALSE;
}
return 0;
}
- case VTXIOCGETPAGE:
+ case VTXIOCGETPAGE:
{
vtx_pagereq_t *req = arg;
int start, end;
@@ -488,15 +488,15 @@
return -EINVAL;
if(copy_to_user(req->buffer, &t->vdau[req->pgbuf].pgbuf[req->start], req->end - req->start + 1))
return -EFAULT;
-
- /*
+
+ /*
* Always read the time directly from SAA5249
*/
-
- if (req->start <= 39 && req->end >= 32)
+
+ if (req->start <= 39 && req->end >= 32)
{
int len;
- char buf[16];
+ char buf[16];
start = max(req->start, 32);
end = min(req->end, 39);
len=end-start+1;
@@ -507,7 +507,7 @@
return -EFAULT;
}
/* Insert the current header if DAU is still searching for a page */
- if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf])
+ if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf])
{
char buf[32];
int len;
@@ -523,7 +523,7 @@
return 0;
}
- case VTXIOCSTOPDAU:
+ case VTXIOCSTOPDAU:
{
vtx_pagereq_t *req = arg;
@@ -534,12 +534,12 @@
return 0;
}
- case VTXIOCPUTPAGE:
- case VTXIOCSETDISP:
- case VTXIOCPUTSTAT:
+ case VTXIOCPUTPAGE:
+ case VTXIOCSETDISP:
+ case VTXIOCPUTSTAT:
return 0;
-
- case VTXIOCCLRCACHE:
+
+ case VTXIOCCLRCACHE:
{
if (i2c_senddata(t, 0, NUM_DAUS, 0, 8, -1) || i2c_senddata(t, 11,
' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',
@@ -551,7 +551,7 @@
return 0;
}
- case VTXIOCSETVIRT:
+ case VTXIOCSETVIRT:
{
/* The SAA5249 has virtual-row reception turned on always */
t->virtual_mode = (int)(long)arg;
@@ -612,14 +612,14 @@
/*
* Handle the locking
*/
-
+
static int saa5249_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg)
{
struct video_device *vd = video_devdata(file);
struct saa5249_device *t=vd->priv;
int err;
-
+
cmd = vtx_fix_command(cmd);
mutex_lock(&t->lock);
err = video_usercopy(inode,file,cmd,arg,do_saa5249_ioctl);
@@ -627,7 +627,7 @@
return err;
}
-static int saa5249_open(struct inode *inode, struct file *file)
+static int saa5249_open(struct inode *inode, struct file *file)
{
struct video_device *vd = video_devdata(file);
struct saa5249_device *t=vd->priv;
@@ -636,7 +636,7 @@
err = video_exclusive_open(inode,file);
if (err < 0)
return err;
-
+
if (t->client==NULL) {
err = -ENODEV;
goto fail;
@@ -647,13 +647,13 @@
i2c_senddata(t, 1, disp_modes[t->disp_mode][0], 0, -1) ||
/* Display TV-picture, no virtual rows */
i2c_senddata(t, 4, NUM_DAUS, disp_modes[t->disp_mode][1], disp_modes[t->disp_mode][2], 7, -1)) /* Set display to page 4 */
-
+
{
err = -EIO;
goto fail;
}
- for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++)
+ for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++)
{
memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf));
memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs));
@@ -673,7 +673,7 @@
-static int saa5249_release(struct inode *inode, struct file *file)
+static int saa5249_release(struct inode *inode, struct file *file)
{
struct video_device *vd = video_devdata(file);
struct saa5249_device *t=vd->priv;
@@ -690,7 +690,7 @@
return i2c_add_driver(&i2c_driver_videotext);
}
-static void __exit cleanup_saa_5249 (void)
+static void __exit cleanup_saa_5249 (void)
{
i2c_del_driver(&i2c_driver_videotext);
}
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index e18ea26..41d951d 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -139,7 +139,7 @@
static int
saa7110_selmux (struct i2c_client *client,
- int chan)
+ int chan)
{
static const unsigned char modes[9][8] = {
/* mode 0 */
@@ -457,7 +457,7 @@
};
static unsigned short ignore = I2C_CLIENT_END;
-
+
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c
index f9ba0c9..686fd47 100644
--- a/drivers/media/video/saa7111.c
+++ b/drivers/media/video/saa7111.c
@@ -1,4 +1,4 @@
-/*
+/*
* saa7111 - Philips SAA7111A video decoder driver version 0.0.3
*
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
@@ -482,7 +482,7 @@
static unsigned short normal_i2c[] = { I2C_SAA7111 >> 1, I2C_CLIENT_END };
static unsigned short ignore = I2C_CLIENT_END;
-
+
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c
index 4a1f841..90398ab 100644
--- a/drivers/media/video/saa7114.c
+++ b/drivers/media/video/saa7114.c
@@ -1,4 +1,4 @@
-/*
+/*
* saa7114 - Philips SAA7114H video decoder driver version 0.0.1
*
* Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
@@ -300,7 +300,7 @@
0x55, 0xff,
0x56, 0xff,
0x57, 0xff,
- 0x58, 0x40, // framing code
+ 0x58, 0x40, // framing code
0x59, 0x47, // horizontal offset
0x5a, 0x06, // vertical offset
0x5b, 0x83, // field offset
@@ -345,7 +345,7 @@
0x82, 0x00,
0x83, 0x00,
0x84, 0xc5,
- 0x85, 0x0d, // hsync and vsync ?
+ 0x85, 0x0d, // hsync and vsync ?
0x86, 0x40,
0x87, 0x01,
0x88, 0x00,
@@ -434,7 +434,7 @@
0xd9, 0x04,
0xda, 0x00, // horizontal luminance phase offset
0xdb, 0x00,
- 0xdc, 0x00, // horizontal chrominance scaling increment
+ 0xdc, 0x00, // horizontal chrominance scaling increment
0xdd, 0x02,
0xde, 0x00, // horizontal chrominance phase offset
0xdf, 0x00,
@@ -754,7 +754,7 @@
saa7114_write(client, 0x87,
decoder->reg[REG_ADDR(0x87)]);
saa7114_write(client, 0x88, 0xd8); // sw reset scaler
- saa7114_write(client, 0x88, 0xf8); // sw reset scaler release
+ saa7114_write(client, 0x88, 0xf8); // sw reset scaler release
saa7114_write(client, 0x80, 0x36);
}
@@ -813,7 +813,7 @@
{ I2C_SAA7114 >> 1, I2C_SAA7114A >> 1, I2C_CLIENT_END };
static unsigned short ignore = I2C_CLIENT_END;
-
+
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
diff --git a/drivers/media/video/saa7121.h b/drivers/media/video/saa7121.h
index 74e37d4..66967ae 100644
--- a/drivers/media/video/saa7121.h
+++ b/drivers/media/video/saa7121.h
@@ -64,7 +64,7 @@
#define PAL_MSB_VERTICAL 0x40 /* 7c */
/* Initialization Sequence */
-
+
static __u8 init7121ntsc[] = {
0x26, 0x0, 0x27, 0x0,
0x28, NTSC_BURST_START, 0x29, NTSC_BURST_END,
@@ -95,7 +95,7 @@
0x78, 0x0, 0x79, 0x0, 0x7a, NTSC_FIRST_ACTIVE,
0x7b, NTSC_LAST_ACTIVE, 0x7c, NTSC_MSB_VERTICAL,
0x7d, 0x0, 0x7e, 0x0, 0x7f, 0x0
-};
+};
#define INIT7121LEN (sizeof(init7121ntsc)/2)
static __u8 init7121pal[] = {
@@ -128,5 +128,5 @@
0x78, 0x0, 0x79, 0x0, 0x7a, PAL_FIRST_ACTIVE,
0x7b, PAL_LAST_ACTIVE, 0x7c, PAL_MSB_VERTICAL,
0x7d, 0x0, 0x7e, 0x0, 0x7f, 0x0
-};
+};
#endif
diff --git a/drivers/media/video/saa7146.h b/drivers/media/video/saa7146.h
index 756963f..2830b5e 100644
--- a/drivers/media/video/saa7146.h
+++ b/drivers/media/video/saa7146.h
@@ -1,7 +1,7 @@
-/*
+/*
saa7146.h - definitions philips saa7146 based cards
Copyright (C) 1999 Nathan Laredo (laredo@gnu.org)
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
@@ -27,7 +27,7 @@
#include <linux/videodev.h>
-#ifndef O_NONCAP
+#ifndef O_NONCAP
#define O_NONCAP O_TRUNC
#endif
@@ -36,7 +36,7 @@
#ifdef __KERNEL__
-struct saa7146_window
+struct saa7146_window
{
int x, y;
ushort width, height;
@@ -70,7 +70,7 @@
int irqstate; /* irq routine is state driven */
int writemode;
int playmode;
- unsigned int nr;
+ unsigned int nr;
unsigned long irq; /* IRQ used by SAA7146 card */
unsigned short id;
unsigned char revision;
diff --git a/drivers/media/video/saa7146reg.h b/drivers/media/video/saa7146reg.h
index 6cc910f..80ec2c1 100644
--- a/drivers/media/video/saa7146reg.h
+++ b/drivers/media/video/saa7146reg.h
@@ -1,7 +1,7 @@
-/*
+/*
saa7146.h - definitions philips saa7146 based cards
Copyright (C) 1999 Nathan Laredo (laredo@gnu.org)
-
+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
index 9f99ee1..9c30841 100644
--- a/drivers/media/video/saa7185.c
+++ b/drivers/media/video/saa7185.c
@@ -1,4 +1,4 @@
-/*
+/*
* saa7185 - Philips SAA7185B video encoder driver version 0.0.3
*
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
@@ -377,7 +377,7 @@
static unsigned short normal_i2c[] = { I2C_SAA7185 >> 1, I2C_CLIENT_END };
static unsigned short ignore = I2C_CLIENT_END;
-
+
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
diff --git a/drivers/media/video/saa7196.h b/drivers/media/video/saa7196.h
index f92f21c..cd4b635 100644
--- a/drivers/media/video/saa7196.h
+++ b/drivers/media/video/saa7196.h
@@ -2,14 +2,14 @@
Definitions for the Philips SAA7196 digital video decoder,
scaler, and clock generator circuit (DESCpro), as used in
the PlanB video input of the Powermac 7x00/8x00 series.
-
+
Copyright (C) 1998 Michel Lanners (mlan@cpu.lu)
The register defines are shamelessly copied from the meteor
driver out of NetBSD (with permission),
and are copyrighted (c) 1995 Mark Tinguely and Jim Lowe
(Thanks !)
-
+
Additional debugging and coding by Takashi Oe (toe@unlinfo.unl.edu)
The default values used for PlanB are my mistakes.
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index f03ea7f..a846ebc 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -4,7 +4,7 @@
* Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
*
* Still somewhat based on the Linux ov511 driver.
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -114,16 +114,16 @@
unsigned short value, unsigned char *cp, int size)
{
return usb_control_msg (
- se401->dev,
- set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0),
- req,
- (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value,
- 0,
- cp,
- size,
- 1000
- );
+ se401->dev,
+ set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0),
+ req,
+ (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ 0,
+ cp,
+ size,
+ 1000
+ );
}
static int se401_set_feature(struct usb_se401 *se401, unsigned short selector,
@@ -140,30 +140,30 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
param,
selector,
- NULL,
- 0,
- 1000
- );
+ NULL,
+ 0,
+ 1000
+ );
}
-static unsigned short se401_get_feature(struct usb_se401 *se401,
- unsigned short selector)
+static unsigned short se401_get_feature(struct usb_se401 *se401,
+ unsigned short selector)
{
/* For 'set' the selecetor should be in index, not sure if the spec is
wrong here to....
*/
unsigned char cp[2];
- usb_control_msg (
- se401->dev,
- usb_rcvctrlpipe(se401->dev, 0),
- SE401_REQ_GET_EXT_FEATURE,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0,
- selector,
- cp,
- 2,
- 1000
- );
+ usb_control_msg (
+ se401->dev,
+ usb_rcvctrlpipe(se401->dev, 0),
+ SE401_REQ_GET_EXT_FEATURE,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0,
+ selector,
+ cp,
+ 2,
+ 1000
+ );
return cp[0]+cp[1]*256;
}
@@ -183,14 +183,14 @@
se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);/* red color gain */
se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);/* green color gain */
se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);/* blue color gain */
-
+
return 0;
}
static void se401_set_exposure(struct usb_se401 *se401, int brightness)
{
int integration=brightness<<5;
-
+
if (flickerless==50) {
integration=integration-integration%106667;
}
@@ -255,11 +255,11 @@
/* For some reason this normally read-only register doesn't get reset
to zero after reading them just once...
*/
- se401_get_feature(se401, HV7131_REG_HIREFNOH);
+ se401_get_feature(se401, HV7131_REG_HIREFNOH);
se401_get_feature(se401, HV7131_REG_HIREFNOL);
se401_get_feature(se401, HV7131_REG_LOREFNOH);
se401_get_feature(se401, HV7131_REG_LOREFNOL);
- ahrc=256*se401_get_feature(se401, HV7131_REG_HIREFNOH) +
+ ahrc=256*se401_get_feature(se401, HV7131_REG_HIREFNOH) +
se401_get_feature(se401, HV7131_REG_HIREFNOL);
alrc=256*se401_get_feature(se401, HV7131_REG_LOREFNOH) +
se401_get_feature(se401, HV7131_REG_LOREFNOL);
@@ -287,12 +287,12 @@
{
struct usb_se401 *se401 = urb->context;
int status;
-
+
if (!se401->dev) {
info("ohoh: device vapourished");
return;
}
-
+
switch (urb->status) {
case 0:
/* success */
@@ -368,7 +368,7 @@
if (se401->nullpackets > SE401_MAX_NULLPACKETS) {
if (waitqueue_active(&se401->wq)) {
wake_up_interruptible(&se401->wq);
- }
+ }
}
}
@@ -433,8 +433,8 @@
int err=0, i;
se401->streaming=1;
- se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
- se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
+ se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
+ se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
/* Set picture settings */
se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);/*windowed + pix intg */
@@ -571,7 +571,7 @@
}
/* First three are absolute, all others relative.
- * Format is rgb from right to left (mirrorred image),
+ * Format is rgb from right to left (mirrorred image),
* we flip it to get bgr from left to right. */
if (frame->curlinepix < 3) {
*(frame->curline-frame->curlinepix)=1+data*4;
@@ -703,7 +703,7 @@
int width=se401->cwidth;
int blineoffset=0, bline;
int linelength=width*3, i;
-
+
if (frame->curpix==0) {
if (frame->grabstate==FRAME_READY) {
@@ -831,7 +831,7 @@
se401->nullpackets=0;
info("to many null length packets, restarting capture");
se401_stop_stream(se401);
- se401_start_stream(se401);
+ se401_start_stream(se401);
} else {
if (se401->scratch[se401->scratch_use].state!=BUFFER_READY) {
se401->frame[framenr].grabstate=FRAME_ERROR;
@@ -866,7 +866,7 @@
{
int i;
- se401->dev = NULL;
+ se401->dev = NULL;
for (i=0; i<SE401_NUMSBUF; i++)
if (se401->urb[i]) {
@@ -882,9 +882,9 @@
usb_kill_urb(se401->inturb);
usb_free_urb(se401->inturb);
}
- info("%s disconnected", se401->camera_name);
+ info("%s disconnected", se401->camera_name);
- /* Free the memory */
+ /* Free the memory */
kfree(se401->width);
kfree(se401->height);
kfree(se401);
@@ -910,7 +910,7 @@
se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES);
if (se401->fbuf)
file->private_data = dev;
- else
+ else
err = -ENOMEM;
se401->user = !err;
@@ -920,11 +920,11 @@
static int se401_close(struct inode *inode, struct file *file)
{
struct video_device *dev = file->private_data;
- struct usb_se401 *se401 = (struct usb_se401 *)dev;
+ struct usb_se401 *se401 = (struct usb_se401 *)dev;
int i;
rvfree(se401->fbuf, se401->maxframesize * SE401_NUMFRAMES);
- if (se401->removed) {
+ if (se401->removed) {
usb_se401_remove_disconnected(se401);
info("device unregistered");
} else {
@@ -942,12 +942,12 @@
unsigned int cmd, void *arg)
{
struct video_device *vdev = file->private_data;
- struct usb_se401 *se401 = (struct usb_se401 *)vdev;
+ struct usb_se401 *se401 = (struct usb_se401 *)vdev;
- if (!se401->dev)
- return -EIO;
+ if (!se401->dev)
+ return -EIO;
- switch (cmd) {
+ switch (cmd) {
case VIDIOCGCAP:
{
struct video_capability *b = arg;
@@ -981,8 +981,8 @@
return -EINVAL;
return 0;
}
- case VIDIOCGPICT:
- {
+ case VIDIOCGPICT:
+ {
struct video_picture *p = arg;
se401_get_pict(se401, p);
@@ -1007,7 +1007,7 @@
if (se401_set_size(se401, vw->width, vw->height))
return -EINVAL;
return 0;
- }
+ }
case VIDIOCGWIN:
{
struct video_window *vw = arg;
@@ -1095,11 +1095,11 @@
case VIDIOCGAUDIO:
case VIDIOCSAUDIO:
return -EINVAL;
- default:
- return -ENOIOCTLCMD;
- } /* end switch */
+ default:
+ return -ENOIOCTLCMD;
+ } /* end switch */
- return 0;
+ return 0;
}
static int se401_ioctl(struct inode *inode, struct file *file,
@@ -1142,7 +1142,7 @@
se401->frame[0].grabstate=FRAME_UNUSED;
if (ret)
- return ret;
+ return ret;
if (copy_to_user(buf, se401->frame[0].data, realcount))
return -EFAULT;
@@ -1183,24 +1183,24 @@
}
mutex_unlock(&se401->lock);
- return 0;
+ return 0;
}
static struct file_operations se401_fops = {
.owner = THIS_MODULE,
- .open = se401_open,
- .release = se401_close,
- .read = se401_read,
- .mmap = se401_mmap,
+ .open = se401_open,
+ .release = se401_close,
+ .read = se401_read,
+ .mmap = se401_mmap,
.ioctl = se401_ioctl,
.compat_ioctl = v4l_compat_ioctl32,
.llseek = no_llseek,
};
static struct video_device se401_template = {
.owner = THIS_MODULE,
- .name = "se401 USB camera",
- .type = VID_TYPE_CAPTURE,
- .hardware = VID_HARDWARE_SE401,
+ .name = "se401 USB camera",
+ .type = VID_TYPE_CAPTURE,
+ .hardware = VID_HARDWARE_SE401,
.fops = &se401_fops,
};
@@ -1209,12 +1209,12 @@
/***************************/
static int se401_init(struct usb_se401 *se401, int button)
{
- int i=0, rc;
- unsigned char cp[0x40];
+ int i=0, rc;
+ unsigned char cp[0x40];
char temp[200];
/* led on */
- se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
+ se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
/* get camera descriptor */
rc=se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, cp, sizeof(cp));
@@ -1254,7 +1254,7 @@
return 1;
}
/* set output mode (BAYER) */
- se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, SE401_FORMAT_BAYER, NULL, 0);
+ se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, SE401_FORMAT_BAYER, NULL, 0);
rc=se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp));
se401->brightness=cp[0]+cp[1]*256;
@@ -1292,71 +1292,71 @@
} else
se401->inturb=NULL;
- /* Flash the led */
- se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
- se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
- se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0);
+ /* Flash the led */
+ se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0);
+ se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0);
+ se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0);
se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0);
- return 0;
+ return 0;
}
static int se401_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
- struct usb_interface_descriptor *interface;
- struct usb_se401 *se401;
- char *camera_name=NULL;
+ struct usb_interface_descriptor *interface;
+ struct usb_se401 *se401;
+ char *camera_name=NULL;
int button=1;
- /* We don't handle multi-config cameras */
- if (dev->descriptor.bNumConfigurations != 1)
- return -ENODEV;
+ /* We don't handle multi-config cameras */
+ if (dev->descriptor.bNumConfigurations != 1)
+ return -ENODEV;
- interface = &intf->cur_altsetting->desc;
+ interface = &intf->cur_altsetting->desc;
- /* Is it an se401? */
- if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 &&
- le16_to_cpu(dev->descriptor.idProduct) == 0x0004) {
- camera_name="Endpoints/Aox SE401";
- } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 &&
- le16_to_cpu(dev->descriptor.idProduct) == 0x030b) {
- camera_name="Philips PCVC665K";
- } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
+ /* Is it an se401? */
+ if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 &&
+ le16_to_cpu(dev->descriptor.idProduct) == 0x0004) {
+ camera_name="Endpoints/Aox SE401";
+ } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 &&
+ le16_to_cpu(dev->descriptor.idProduct) == 0x030b) {
+ camera_name="Philips PCVC665K";
+ } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
le16_to_cpu(dev->descriptor.idProduct) == 0x5001) {
camera_name="Kensington VideoCAM 67014";
- } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
+ } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
le16_to_cpu(dev->descriptor.idProduct) == 0x5002) {
camera_name="Kensington VideoCAM 6701(5/7)";
- } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
+ } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d &&
le16_to_cpu(dev->descriptor.idProduct) == 0x5003) {
camera_name="Kensington VideoCAM 67016";
button=0;
} else
return -ENODEV;
- /* Checking vendor/product should be enough, but what the hell */
- if (interface->bInterfaceClass != 0x00)
+ /* Checking vendor/product should be enough, but what the hell */
+ if (interface->bInterfaceClass != 0x00)
return -ENODEV;
- if (interface->bInterfaceSubClass != 0x00)
+ if (interface->bInterfaceSubClass != 0x00)
return -ENODEV;
- /* We found one */
- info("SE401 camera found: %s", camera_name);
+ /* We found one */
+ info("SE401 camera found: %s", camera_name);
- if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) {
- err("couldn't kmalloc se401 struct");
+ if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) {
+ err("couldn't kmalloc se401 struct");
return -ENOMEM;
- }
+ }
- se401->dev = dev;
- se401->iface = interface->bInterfaceNumber;
- se401->camera_name = camera_name;
+ se401->dev = dev;
+ se401->iface = interface->bInterfaceNumber;
+ se401->camera_name = camera_name;
info("firmware version: %02x", le16_to_cpu(dev->descriptor.bcdDevice) & 255);
- if (se401_init(se401, button)) {
+ if (se401_init(se401, button)) {
kfree(se401);
return -EIO;
}
@@ -1375,7 +1375,7 @@
info("registered new video device: video%d", se401->vdev.minor);
usb_set_intfdata (intf, se401);
- return 0;
+ return 0;
}
static void se401_disconnect(struct usb_interface *intf)
@@ -1400,10 +1400,10 @@
}
static struct usb_driver se401_driver = {
- .name = "se401",
- .id_table = device_table,
+ .name = "se401",
+ .id_table = device_table,
.probe = se401_probe,
- .disconnect = se401_disconnect,
+ .disconnect = se401_disconnect,
};
diff --git a/drivers/media/video/se401.h b/drivers/media/video/se401.h
index e88a40d..a7a216b 100644
--- a/drivers/media/video/se401.h
+++ b/drivers/media/video/se401.h
@@ -177,7 +177,7 @@
int expose_m;
int expose_l;
int resetlevel;
-
+
int enhance;
int format;
@@ -200,12 +200,12 @@
struct urb *urb[SE401_NUMSBUF];
struct urb *inturb;
-
+
int button;
int buttonpressed;
int curframe; /* Current receiving frame */
- struct se401_frame frame[SE401_NUMFRAMES];
+ struct se401_frame frame[SE401_NUMFRAMES];
int readcount;
int framecount;
int error;
diff --git a/drivers/media/video/sn9c102/Makefile b/drivers/media/video/sn9c102/Makefile
index 8bcb0f7..536ad30 100644
--- a/drivers/media/video/sn9c102/Makefile
+++ b/drivers/media/video/sn9c102/Makefile
@@ -1,7 +1,7 @@
sn9c102-objs := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o \
- sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bca.o \
- sn9c102_pas202bcb.o sn9c102_tas5110c1b.o \
- sn9c102_tas5130d1b.o
+ sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bca.o \
+ sn9c102_pas202bcb.o sn9c102_tas5110c1b.o \
+ sn9c102_tas5130d1b.o
obj-$(CONFIG_USB_SN9C102) += sn9c102.o
diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h
index 1d70a62..2c6ff39 100644
--- a/drivers/media/video/sn9c102/sn9c102.h
+++ b/drivers/media/video/sn9c102/sn9c102.h
@@ -164,7 +164,7 @@
void
sn9c102_attach_sensor(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor)
+ struct sn9c102_sensor* sensor)
{
memcpy(&cam->sensor, sensor, sizeof(struct sn9c102_sensor));
}
@@ -183,7 +183,7 @@
dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
else if ((level) >= 3) \
dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
- __FUNCTION__, __LINE__ , ## args); \
+ __FUNCTION__, __LINE__ , ## args); \
} \
} while (0)
# define V4LDBG(level, name, cmd) \
@@ -198,7 +198,7 @@
pr_info("sn9c102: " fmt "\n", ## args); \
else if ((level) == 3) \
pr_debug("sn9c102: [%s:%d] " fmt "\n", __FUNCTION__, \
- __LINE__ , ## args); \
+ __LINE__ , ## args); \
} \
} while (0)
#else
@@ -210,7 +210,7 @@
#undef PDBG
#define PDBG(fmt, args...) \
dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
- __FUNCTION__, __LINE__ , ## args)
+ __FUNCTION__, __LINE__ , ## args)
#undef PDBGG
#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 4c6cc63..ea4394d 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -62,53 +62,53 @@
static short video_nr[] = {[0 ... SN9C102_MAX_DEVICES-1] = -1};
module_param_array(video_nr, short, NULL, 0444);
MODULE_PARM_DESC(video_nr,
- "\n<-1|n[,...]> Specify V4L2 minor mode number."
- "\n -1 = use next available (default)"
- "\n n = use minor number n (integer >= 0)"
- "\nYou can specify up to "__MODULE_STRING(SN9C102_MAX_DEVICES)
- " cameras this way."
- "\nFor example:"
- "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
- "\nthe second camera and use auto for the first"
- "\none and for every other camera."
- "\n");
+ "\n<-1|n[,...]> Specify V4L2 minor mode number."
+ "\n -1 = use next available (default)"
+ "\n n = use minor number n (integer >= 0)"
+ "\nYou can specify up to "__MODULE_STRING(SN9C102_MAX_DEVICES)
+ " cameras this way."
+ "\nFor example:"
+ "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+ "\nthe second camera and use auto for the first"
+ "\none and for every other camera."
+ "\n");
-static short force_munmap[] = {[0 ... SN9C102_MAX_DEVICES-1] =
- SN9C102_FORCE_MUNMAP};
+static short force_munmap[] = {[0 ... SN9C102_MAX_DEVICES-1] =
+ SN9C102_FORCE_MUNMAP};
module_param_array(force_munmap, bool, NULL, 0444);
MODULE_PARM_DESC(force_munmap,
- "\n<0|1[,...]> Force the application to unmap previously"
- "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
- "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
- "\nthis feature. This parameter is specific for each"
- "\ndetected camera."
- "\n 0 = do not force memory unmapping"
- "\n 1 = force memory unmapping (save memory)"
- "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
- "\n");
+ "\n<0|1[,...]> Force the application to unmap previously"
+ "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+ "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+ "\nthis feature. This parameter is specific for each"
+ "\ndetected camera."
+ "\n 0 = do not force memory unmapping"
+ "\n 1 = force memory unmapping (save memory)"
+ "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+ "\n");
static unsigned int frame_timeout[] = {[0 ... SN9C102_MAX_DEVICES-1] =
- SN9C102_FRAME_TIMEOUT};
+ SN9C102_FRAME_TIMEOUT};
module_param_array(frame_timeout, uint, NULL, 0644);
MODULE_PARM_DESC(frame_timeout,
- "\n<n[,...]> Timeout for a video frame in seconds."
- "\nThis parameter is specific for each detected camera."
- "\nDefault value is "__MODULE_STRING(SN9C102_FRAME_TIMEOUT)"."
- "\n");
+ "\n<n[,...]> Timeout for a video frame in seconds."
+ "\nThis parameter is specific for each detected camera."
+ "\nDefault value is "__MODULE_STRING(SN9C102_FRAME_TIMEOUT)"."
+ "\n");
#ifdef SN9C102_DEBUG
static unsigned short debug = SN9C102_DEBUG_LEVEL;
module_param(debug, ushort, 0644);
MODULE_PARM_DESC(debug,
- "\n<n> Debugging information level, from 0 to 3:"
- "\n0 = none (use carefully)"
- "\n1 = critical errors"
- "\n2 = significant informations"
- "\n3 = more verbose messages"
- "\nLevel 3 is useful for testing only, when only "
- "one device is used."
- "\nDefault value is "__MODULE_STRING(SN9C102_DEBUG_LEVEL)"."
- "\n");
+ "\n<n> Debugging information level, from 0 to 3:"
+ "\n0 = none (use carefully)"
+ "\n1 = critical errors"
+ "\n2 = significant informations"
+ "\n3 = more verbose messages"
+ "\nLevel 3 is useful for testing only, when only "
+ "one device is used."
+ "\nDefault value is "__MODULE_STRING(SN9C102_DEBUG_LEVEL)"."
+ "\n");
#endif
/*****************************************************************************/
@@ -131,16 +131,16 @@
/*****************************************************************************/
-static u32
-sn9c102_request_buffers(struct sn9c102_device* cam, u32 count,
- enum sn9c102_io_method io)
+static u32
+sn9c102_request_buffers(struct sn9c102_device* cam, u32 count,
+ enum sn9c102_io_method io)
{
struct v4l2_pix_format* p = &(cam->sensor.pix_format);
struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
const size_t imagesize = cam->module_param.force_munmap ||
- io == IO_READ ?
- (p->width * p->height * p->priv) / 8 :
- (r->width * r->height * p->priv) / 8;
+ io == IO_READ ?
+ (p->width * p->height * p->priv) / 8 :
+ (r->width * r->height * p->priv) / 8;
void* buff = NULL;
u32 i;
@@ -232,8 +232,8 @@
return -1;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
- index, 0, buff, sizeof(buff),
- SN9C102_CTRL_TIMEOUT*sizeof(buff));
+ index, 0, buff, sizeof(buff),
+ SN9C102_CTRL_TIMEOUT*sizeof(buff));
if (res < 0) {
DBG(3, "Failed to write registers (index 0x%02X, error %d)",
index, res);
@@ -259,7 +259,7 @@
*buff = value;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
- index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
+ index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
if (res < 0) {
DBG(3, "Failed to write a register (value 0x%02X, index "
"0x%02X, error %d)", value, index, res);
@@ -280,7 +280,7 @@
int res;
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
- index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
+ index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
if (res < 0)
DBG(3, "Failed to read a register (index 0x%02X, error %d)",
index, res);
@@ -319,8 +319,8 @@
static int
-sn9c102_i2c_detect_read_error(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor)
+sn9c102_i2c_detect_read_error(struct sn9c102_device* cam,
+ struct sn9c102_sensor* sensor)
{
int r;
r = sn9c102_read_reg(cam, 0x08);
@@ -329,8 +329,8 @@
static int
-sn9c102_i2c_detect_write_error(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor)
+sn9c102_i2c_detect_write_error(struct sn9c102_device* cam,
+ struct sn9c102_sensor* sensor)
{
int r;
r = sn9c102_read_reg(cam, 0x08);
@@ -338,10 +338,10 @@
}
-int
+int
sn9c102_i2c_try_raw_read(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 data0, u8 data1,
- u8 n, u8 buffer[])
+ struct sn9c102_sensor* sensor, u8 data0, u8 data1,
+ u8 n, u8 buffer[])
{
struct usb_device* udev = cam->usbdev;
u8* data = cam->control_buffer;
@@ -349,12 +349,12 @@
/* Write cycle */
data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) |
- ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) | 0x10;
+ ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) | 0x10;
data[1] = data0; /* I2C slave id */
data[2] = data1; /* address */
data[7] = 0x10;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
- 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
+ 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
if (res < 0)
err += res;
@@ -362,12 +362,12 @@
/* Read cycle - n bytes */
data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) |
- ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) |
- (n << 4) | 0x02;
+ ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) |
+ (n << 4) | 0x02;
data[1] = data0;
data[7] = 0x10;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
- 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
+ 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
if (res < 0)
err += res;
@@ -375,7 +375,7 @@
/* The first read byte will be placed in data[4] */
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
- 0x0a, 0, data, 5, SN9C102_CTRL_TIMEOUT);
+ 0x0a, 0, data, 5, SN9C102_CTRL_TIMEOUT);
if (res < 0)
err += res;
@@ -396,10 +396,10 @@
}
-int
+int
sn9c102_i2c_try_raw_write(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 n, u8 data0,
- u8 data1, u8 data2, u8 data3, u8 data4, u8 data5)
+ struct sn9c102_sensor* sensor, u8 n, u8 data0,
+ u8 data1, u8 data2, u8 data3, u8 data4, u8 data5)
{
struct usb_device* udev = cam->usbdev;
u8* data = cam->control_buffer;
@@ -407,8 +407,8 @@
/* Write cycle. It usually is address + value */
data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) |
- ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0)
- | ((n - 1) << 4);
+ ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0)
+ | ((n - 1) << 4);
data[1] = data0;
data[2] = data1;
data[3] = data2;
@@ -417,7 +417,7 @@
data[6] = data5;
data[7] = 0x14;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
- 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
+ 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT);
if (res < 0)
err += res;
@@ -437,20 +437,20 @@
int
sn9c102_i2c_try_read(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 address)
+ struct sn9c102_sensor* sensor, u8 address)
{
return sn9c102_i2c_try_raw_read(cam, sensor, sensor->i2c_slave_id,
- address, 1, NULL);
+ address, 1, NULL);
}
int
sn9c102_i2c_try_write(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 address, u8 value)
+ struct sn9c102_sensor* sensor, u8 address, u8 value)
{
- return sn9c102_i2c_try_raw_write(cam, sensor, 3,
- sensor->i2c_slave_id, address,
- value, 0, 0, 0);
+ return sn9c102_i2c_try_raw_write(cam, sensor, 3,
+ sensor->i2c_slave_id, address,
+ value, 0, 0, 0);
}
@@ -484,7 +484,7 @@
n = sizeof(sn9c103_sof_header) / soflen;
}
- for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
+ for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
for (j = 0; j < n; j++)
/* The invariable part of the header is 6 bytes long */
if ((cam->bridge != BRIDGE_SN9C103 &&
@@ -552,15 +552,15 @@
if (!(*f))
(*f) = list_entry(cam->inqueue.next, struct sn9c102_frame_t,
- frame);
+ frame);
imagesize = (cam->sensor.pix_format.width *
- cam->sensor.pix_format.height *
- cam->sensor.pix_format.priv) / 8;
+ cam->sensor.pix_format.height *
+ cam->sensor.pix_format.priv) / 8;
soflen = (cam->bridge) == BRIDGE_SN9C103 ?
- sizeof(sn9c103_sof_header_t) :
- sizeof(sn9c102_sof_header_t);
+ sizeof(sn9c103_sof_header_t) :
+ sizeof(sn9c102_sof_header_t);
for (i = 0; i < urb->number_of_packets; i++) {
unsigned int img, len, status;
@@ -611,19 +611,19 @@
if ((*f)->buf.bytesused == imagesize ||
(cam->sensor.pix_format.pixelformat ==
- V4L2_PIX_FMT_SN9C10X && eof)) {
+ V4L2_PIX_FMT_SN9C10X && eof)) {
u32 b;
b = (*f)->buf.bytesused;
(*f)->state = F_DONE;
(*f)->buf.sequence= ++cam->frame_count;
spin_lock(&cam->queue_lock);
list_move_tail(&(*f)->frame,
- &cam->outqueue);
+ &cam->outqueue);
if (!list_empty(&cam->inqueue))
(*f) = list_entry(
- cam->inqueue.next,
- struct sn9c102_frame_t,
- frame );
+ cam->inqueue.next,
+ struct sn9c102_frame_t,
+ frame );
else
(*f) = NULL;
spin_unlock(&cam->queue_lock);
@@ -638,7 +638,7 @@
} else if (eof) {
(*f)->state = F_ERROR;
DBG(3, "Not expected EOF after %lu "
- "bytes of image data",
+ "bytes of image data",
(unsigned long)
((*f)->buf.bytesused));
}
@@ -676,7 +676,7 @@
goto end_of_frame;
} else {
DBG(3, "SOF before expected EOF after "
- "%lu bytes of image data",
+ "%lu bytes of image data",
(unsigned long)
((*f)->buf.bytesused));
goto start_of_frame;
@@ -702,18 +702,18 @@
struct usb_device *udev = cam->usbdev;
struct urb* urb;
const unsigned int sn9c102_wMaxPacketSize[] = {0, 128, 256, 384, 512,
- 680, 800, 900, 1023};
+ 680, 800, 900, 1023};
const unsigned int sn9c103_wMaxPacketSize[] = {0, 128, 256, 384, 512,
- 680, 800, 900, 1003};
+ 680, 800, 900, 1003};
const unsigned int psz = (cam->bridge == BRIDGE_SN9C103) ?
- sn9c103_wMaxPacketSize[SN9C102_ALTERNATE_SETTING] :
- sn9c102_wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
+ sn9c103_wMaxPacketSize[SN9C102_ALTERNATE_SETTING] :
+ sn9c102_wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
s8 i, j;
int err = 0;
for (i = 0; i < SN9C102_URBS; i++) {
cam->transfer_buffer[i] = kzalloc(SN9C102_ISO_PACKETS * psz,
- GFP_KERNEL);
+ GFP_KERNEL);
if (!cam->transfer_buffer[i]) {
err = -ENOMEM;
DBG(1, "Not enough memory");
@@ -815,9 +815,9 @@
cam->stream = STREAM_INTERRUPT;
timeout = wait_event_timeout(cam->wait_stream,
- (cam->stream == STREAM_OFF) ||
- (cam->state & DEV_DISCONNECTED),
- SN9C102_URB_TIMEOUT);
+ (cam->stream == STREAM_OFF) ||
+ (cam->state & DEV_DISCONNECTED),
+ SN9C102_URB_TIMEOUT);
if (cam->state & DEV_DISCONNECTED)
return -ENODEV;
else if (cam->stream != STREAM_OFF) {
@@ -861,7 +861,7 @@
/*
NOTE 1: being inside one of the following methods implies that the v4l
- device exists for sure (see kobjects and reference counters)
+ device exists for sure (see kobjects and reference counters)
NOTE 2: buffers are PAGE_SIZE long
*/
@@ -884,10 +884,10 @@
mutex_unlock(&sn9c102_sysfs_lock);
return count;
-}
+}
-static ssize_t
+static ssize_t
sn9c102_store_reg(struct class_device* cd, const char* buf, size_t len)
{
struct sn9c102_device* cam;
@@ -947,7 +947,7 @@
mutex_unlock(&sn9c102_sysfs_lock);
return count;
-}
+}
static ssize_t
@@ -1013,7 +1013,7 @@
}
-static ssize_t
+static ssize_t
sn9c102_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
{
struct sn9c102_device* cam;
@@ -1078,7 +1078,7 @@
mutex_unlock(&sn9c102_sysfs_lock);
return count;
-}
+}
static ssize_t
@@ -1222,22 +1222,22 @@
DBG(3, "Frame header, read bytes: %zd", count);
return count;
-}
+}
static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
- sn9c102_show_reg, sn9c102_store_reg);
+ sn9c102_show_reg, sn9c102_store_reg);
static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
- sn9c102_show_val, sn9c102_store_val);
+ sn9c102_show_val, sn9c102_store_val);
static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
- sn9c102_show_i2c_reg, sn9c102_store_i2c_reg);
+ sn9c102_show_i2c_reg, sn9c102_store_i2c_reg);
static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
- sn9c102_show_i2c_val, sn9c102_store_i2c_val);
+ sn9c102_show_i2c_val, sn9c102_store_i2c_val);
static CLASS_DEVICE_ATTR(green, S_IWUGO, NULL, sn9c102_store_green);
static CLASS_DEVICE_ATTR(blue, S_IWUGO, NULL, sn9c102_store_blue);
static CLASS_DEVICE_ATTR(red, S_IWUGO, NULL, sn9c102_store_red);
static CLASS_DEVICE_ATTR(frame_header, S_IRUGO,
- sn9c102_show_frame_header, NULL);
+ sn9c102_show_frame_header, NULL);
static void sn9c102_create_sysfs(struct sn9c102_device* cam)
@@ -1278,7 +1278,7 @@
static int
sn9c102_set_compression(struct sn9c102_device* cam,
- struct v4l2_jpegcompression* compression)
+ struct v4l2_jpegcompression* compression)
{
int err = 0;
@@ -1469,8 +1469,8 @@
}
mutex_unlock(&cam->dev_mutex);
err = wait_event_interruptible_exclusive(cam->open,
- cam->state & DEV_DISCONNECTED
- || !cam->users);
+ cam->state & DEV_DISCONNECTED
+ || !cam->users);
if (err) {
up_read(&sn9c102_disconnect);
return err;
@@ -1600,12 +1600,12 @@
return -EAGAIN;
}
timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- cam->module_param.frame_timeout *
- 1000 * msecs_to_jiffies(1) );
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED),
+ cam->module_param.frame_timeout *
+ 1000 * msecs_to_jiffies(1) );
if (timeout < 0) {
mutex_unlock(&cam->fileop_mutex);
return timeout;
@@ -1672,7 +1672,7 @@
if (cam->io == IO_NONE) {
if (!sn9c102_request_buffers(cam, cam->nreadbuffers,
- IO_READ)) {
+ IO_READ)) {
DBG(1, "poll() failed, not enough memory");
goto error;
}
@@ -1729,7 +1729,7 @@
{
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
unsigned long size = vma->vm_end - vma->vm_start,
- start = vma->vm_start;
+ start = vma->vm_start;
void *pos;
u32 i;
@@ -1797,13 +1797,13 @@
.driver = "sn9c102",
.version = SN9C102_MODULE_VERSION_CODE,
.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
+ V4L2_CAP_STREAMING,
};
strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
- sizeof(cap.bus_info));
+ sizeof(cap.bus_info));
if (copy_to_user(arg, &cap, sizeof(cap)))
return -EFAULT;
@@ -2138,7 +2138,7 @@
return -EINVAL;
pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X)
- ? 0 : (pfmt->width * pfmt->priv) / 8;
+ ? 0 : (pfmt->width * pfmt->priv) / 8;
pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
pfmt->field = V4L2_FIELD_NONE;
memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
@@ -2152,7 +2152,7 @@
static int
sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
- void __user * arg)
+ void __user * arg)
{
struct sn9c102_sensor* s = &cam->sensor;
struct v4l2_format format;
@@ -2214,7 +2214,7 @@
pix->priv = pfmt->priv; /* bpp */
pix->colorspace = pfmt->colorspace;
pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
- ? 0 : (pix->width * pix->priv) / 8;
+ ? 0 : (pix->width * pix->priv) / 8;
pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
pix->field = V4L2_FIELD_NONE;
@@ -2287,7 +2287,7 @@
sn9c102_vidioc_g_jpegcomp(struct sn9c102_device* cam, void __user * arg)
{
if (copy_to_user(arg, &cam->compression,
- sizeof(cam->compression)))
+ sizeof(cam->compression)))
return -EFAULT;
return 0;
@@ -2436,7 +2436,7 @@
static int
sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
- void __user * arg)
+ void __user * arg)
{
struct v4l2_buffer b;
struct sn9c102_frame_t *f;
@@ -2455,12 +2455,12 @@
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- cam->module_param.frame_timeout *
- 1000 * msecs_to_jiffies(1) );
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED),
+ cam->module_param.frame_timeout *
+ 1000 * msecs_to_jiffies(1) );
if (timeout < 0)
return timeout;
if (cam->state & DEV_DISCONNECTED)
@@ -2584,7 +2584,7 @@
static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp,
- unsigned int cmd, void __user * arg)
+ unsigned int cmd, void __user * arg)
{
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
@@ -2678,7 +2678,7 @@
static int sn9c102_ioctl(struct inode* inode, struct file* filp,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg)
{
struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
int err = 0;
@@ -2761,7 +2761,7 @@
}
cam->bridge = (id->idProduct & 0xffc0) == 0x6080 ?
- BRIDGE_SN9C103 : BRIDGE_SN9C102;
+ BRIDGE_SN9C103 : BRIDGE_SN9C102;
switch (cam->bridge) {
case BRIDGE_SN9C101:
case BRIDGE_SN9C102:
@@ -2807,7 +2807,7 @@
mutex_lock(&cam->dev_mutex);
err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
- video_nr[dev_nr]);
+ video_nr[dev_nr]);
if (err) {
DBG(1, "V4L2 device registration failed");
if (err == -ENFILE && video_nr[dev_nr] == -1)
diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131d.c b/drivers/media/video/sn9c102/sn9c102_hv7131d.c
index 46c12ec..c4117bf 100644
--- a/drivers/media/video/sn9c102/sn9c102_hv7131d.c
+++ b/drivers/media/video/sn9c102/sn9c102_hv7131d.c
@@ -44,8 +44,8 @@
}
-static int hv7131d_get_ctrl(struct sn9c102_device* cam,
- struct v4l2_control* ctrl)
+static int hv7131d_get_ctrl(struct sn9c102_device* cam,
+ struct v4l2_control* ctrl)
{
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
@@ -88,8 +88,8 @@
}
-static int hv7131d_set_ctrl(struct sn9c102_device* cam,
- const struct v4l2_control* ctrl)
+static int hv7131d_set_ctrl(struct sn9c102_device* cam,
+ const struct v4l2_control* ctrl)
{
int err = 0;
@@ -121,8 +121,8 @@
}
-static int hv7131d_set_crop(struct sn9c102_device* cam,
- const struct v4l2_rect* rect)
+static int hv7131d_set_crop(struct sn9c102_device* cam,
+ const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &hv7131d;
int err = 0;
@@ -136,8 +136,8 @@
}
-static int hv7131d_set_pix_format(struct sn9c102_device* cam,
- const struct v4l2_pix_format* pix)
+static int hv7131d_set_pix_format(struct sn9c102_device* cam,
+ const struct v4l2_pix_format* pix)
{
int err = 0;
diff --git a/drivers/media/video/sn9c102/sn9c102_mi0343.c b/drivers/media/video/sn9c102/sn9c102_mi0343.c
index d9aa7a6..4169ea4 100644
--- a/drivers/media/video/sn9c102/sn9c102_mi0343.c
+++ b/drivers/media/video/sn9c102/sn9c102_mi0343.c
@@ -39,64 +39,64 @@
err += sn9c102_write_reg(cam, 0xa0, 0x19);
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
- 0x0d, 0x00, 0x01, 0, 0);
+ 0x0d, 0x00, 0x01, 0, 0);
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
- 0x0d, 0x00, 0x00, 0, 0);
+ 0x0d, 0x00, 0x00, 0, 0);
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
- 0x03, 0x01, 0xe1, 0, 0);
+ 0x03, 0x01, 0xe1, 0, 0);
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
- 0x04, 0x02, 0x81, 0, 0);
+ 0x04, 0x02, 0x81, 0, 0);
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
- 0x05, 0x00, 0x17, 0, 0);
+ 0x05, 0x00, 0x17, 0, 0);
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
- 0x06, 0x00, 0x11, 0, 0);
+ 0x06, 0x00, 0x11, 0, 0);
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
- 0x62, 0x04, 0x9a, 0, 0);
+ 0x62, 0x04, 0x9a, 0, 0);
return err;
}
-static int mi0343_get_ctrl(struct sn9c102_device* cam,
- struct v4l2_control* ctrl)
+static int mi0343_get_ctrl(struct sn9c102_device* cam,
+ struct v4l2_control* ctrl)
{
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
- 0x09, 2+1, mi0343_i2c_data) < 0)
+ 0x09, 2+1, mi0343_i2c_data) < 0)
return -EIO;
ctrl->value = mi0343_i2c_data[2];
return 0;
case V4L2_CID_GAIN:
if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
- 0x35, 2+1, mi0343_i2c_data) < 0)
+ 0x35, 2+1, mi0343_i2c_data) < 0)
return -EIO;
break;
case V4L2_CID_HFLIP:
if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
- 0x20, 2+1, mi0343_i2c_data) < 0)
+ 0x20, 2+1, mi0343_i2c_data) < 0)
return -EIO;
ctrl->value = mi0343_i2c_data[3] & 0x20 ? 1 : 0;
return 0;
case V4L2_CID_VFLIP:
if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
- 0x20, 2+1, mi0343_i2c_data) < 0)
+ 0x20, 2+1, mi0343_i2c_data) < 0)
return -EIO;
ctrl->value = mi0343_i2c_data[3] & 0x80 ? 1 : 0;
return 0;
case V4L2_CID_RED_BALANCE:
if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
- 0x2d, 2+1, mi0343_i2c_data) < 0)
+ 0x2d, 2+1, mi0343_i2c_data) < 0)
return -EIO;
break;
case V4L2_CID_BLUE_BALANCE:
if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
- 0x2c, 2+1, mi0343_i2c_data) < 0)
+ 0x2c, 2+1, mi0343_i2c_data) < 0)
return -EIO;
break;
case SN9C102_V4L2_CID_GREEN_BALANCE:
if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
- 0x2e, 2+1, mi0343_i2c_data) < 0)
+ 0x2e, 2+1, mi0343_i2c_data) < 0)
return -EIO;
break;
default:
@@ -121,8 +121,8 @@
}
-static int mi0343_set_ctrl(struct sn9c102_device* cam,
- const struct v4l2_control* ctrl)
+static int mi0343_set_ctrl(struct sn9c102_device* cam,
+ const struct v4l2_control* ctrl)
{
u16 reg = 0;
int err = 0;
@@ -144,51 +144,51 @@
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x09, ctrl->value, 0x00,
- 0, 0);
+ mi0343.i2c_slave_id,
+ 0x09, ctrl->value, 0x00,
+ 0, 0);
break;
case V4L2_CID_GAIN:
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x35, reg >> 8, reg & 0xff,
- 0, 0);
+ mi0343.i2c_slave_id,
+ 0x35, reg >> 8, reg & 0xff,
+ 0, 0);
break;
case V4L2_CID_HFLIP:
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x20, ctrl->value ? 0x40:0x00,
- ctrl->value ? 0x20:0x00,
- 0, 0);
+ mi0343.i2c_slave_id,
+ 0x20, ctrl->value ? 0x40:0x00,
+ ctrl->value ? 0x20:0x00,
+ 0, 0);
break;
case V4L2_CID_VFLIP:
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x20, ctrl->value ? 0x80:0x00,
- ctrl->value ? 0x80:0x00,
- 0, 0);
+ mi0343.i2c_slave_id,
+ 0x20, ctrl->value ? 0x80:0x00,
+ ctrl->value ? 0x80:0x00,
+ 0, 0);
break;
case V4L2_CID_RED_BALANCE:
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x2d, reg >> 8, reg & 0xff,
- 0, 0);
+ mi0343.i2c_slave_id,
+ 0x2d, reg >> 8, reg & 0xff,
+ 0, 0);
break;
case V4L2_CID_BLUE_BALANCE:
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x2c, reg >> 8, reg & 0xff,
- 0, 0);
+ mi0343.i2c_slave_id,
+ 0x2c, reg >> 8, reg & 0xff,
+ 0, 0);
break;
case SN9C102_V4L2_CID_GREEN_BALANCE:
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x2b, reg >> 8, reg & 0xff,
- 0, 0);
+ mi0343.i2c_slave_id,
+ 0x2b, reg >> 8, reg & 0xff,
+ 0, 0);
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x2e, reg >> 8, reg & 0xff,
- 0, 0);
+ mi0343.i2c_slave_id,
+ 0x2e, reg >> 8, reg & 0xff,
+ 0, 0);
break;
default:
return -EINVAL;
@@ -198,8 +198,8 @@
}
-static int mi0343_set_crop(struct sn9c102_device* cam,
- const struct v4l2_rect* rect)
+static int mi0343_set_crop(struct sn9c102_device* cam,
+ const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &mi0343;
int err = 0;
@@ -213,20 +213,20 @@
}
-static int mi0343_set_pix_format(struct sn9c102_device* cam,
- const struct v4l2_pix_format* pix)
+static int mi0343_set_pix_format(struct sn9c102_device* cam,
+ const struct v4l2_pix_format* pix)
{
int err = 0;
if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) {
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x0a, 0x00, 0x03, 0, 0);
+ mi0343.i2c_slave_id,
+ 0x0a, 0x00, 0x03, 0, 0);
err += sn9c102_write_reg(cam, 0x20, 0x19);
} else {
err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
- mi0343.i2c_slave_id,
- 0x0a, 0x00, 0x05, 0, 0);
+ mi0343.i2c_slave_id,
+ 0x0a, 0x00, 0x05, 0, 0);
err += sn9c102_write_reg(cam, 0xa0, 0x19);
}
@@ -351,7 +351,7 @@
return -EIO;
if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, 0x00,
- 2, mi0343_i2c_data) < 0)
+ 2, mi0343_i2c_data) < 0)
return -EIO;
if (mi0343_i2c_data[4] != 0x32 && mi0343_i2c_data[3] != 0xe3)
diff --git a/drivers/media/video/sn9c102/sn9c102_ov7630.c b/drivers/media/video/sn9c102/sn9c102_ov7630.c
index 42852b7..3da0420 100644
--- a/drivers/media/video/sn9c102/sn9c102_ov7630.c
+++ b/drivers/media/video/sn9c102/sn9c102_ov7630.c
@@ -69,7 +69,7 @@
static int ov7630_set_ctrl(struct sn9c102_device* cam,
- const struct v4l2_control* ctrl)
+ const struct v4l2_control* ctrl)
{
int err = 0;
@@ -89,8 +89,8 @@
break;
case V4L2_CID_CONTRAST:
err += ctrl->value ? sn9c102_i2c_write(cam, 0x05,
- (ctrl->value-1) | 0x20)
- : sn9c102_i2c_write(cam, 0x05, 0x00);
+ (ctrl->value-1) | 0x20)
+ : sn9c102_i2c_write(cam, 0x05, 0x00);
break;
case V4L2_CID_BRIGHTNESS:
err += sn9c102_i2c_write(cam, 0x06, ctrl->value);
@@ -100,8 +100,8 @@
break;
case V4L2_CID_HUE:
err += ctrl->value ? sn9c102_i2c_write(cam, 0x04,
- (ctrl->value-1) | 0x20)
- : sn9c102_i2c_write(cam, 0x04, 0x00);
+ (ctrl->value-1) | 0x20)
+ : sn9c102_i2c_write(cam, 0x04, 0x00);
break;
case V4L2_CID_DO_WHITE_BALANCE:
err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
@@ -139,7 +139,7 @@
static int ov7630_set_crop(struct sn9c102_device* cam,
- const struct v4l2_rect* rect)
+ const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &ov7630;
int err = 0;
@@ -152,7 +152,7 @@
static int ov7630_set_pix_format(struct sn9c102_device* cam,
- const struct v4l2_pix_format* pix)
+ const struct v4l2_pix_format* pix)
{
int err = 0;
diff --git a/drivers/media/video/sn9c102/sn9c102_pas106b.c b/drivers/media/video/sn9c102/sn9c102_pas106b.c
index b1dee78..9915944 100644
--- a/drivers/media/video/sn9c102/sn9c102_pas106b.c
+++ b/drivers/media/video/sn9c102/sn9c102_pas106b.c
@@ -53,8 +53,8 @@
}
-static int pas106b_get_ctrl(struct sn9c102_device* cam,
- struct v4l2_control* ctrl)
+static int pas106b_get_ctrl(struct sn9c102_device* cam,
+ struct v4l2_control* ctrl)
{
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
@@ -102,8 +102,8 @@
}
-static int pas106b_set_ctrl(struct sn9c102_device* cam,
- const struct v4l2_control* ctrl)
+static int pas106b_set_ctrl(struct sn9c102_device* cam,
+ const struct v4l2_control* ctrl)
{
int err = 0;
@@ -140,8 +140,8 @@
}
-static int pas106b_set_crop(struct sn9c102_device* cam,
- const struct v4l2_rect* rect)
+static int pas106b_set_crop(struct sn9c102_device* cam,
+ const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &pas106b;
int err = 0;
@@ -155,8 +155,8 @@
}
-static int pas106b_set_pix_format(struct sn9c102_device* cam,
- const struct v4l2_pix_format* pix)
+static int pas106b_set_pix_format(struct sn9c102_device* cam,
+ const struct v4l2_pix_format* pix)
{
int err = 0;
diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bca.c b/drivers/media/video/sn9c102/sn9c102_pas202bca.c
index 3453237..c8f1ae2 100644
--- a/drivers/media/video/sn9c102/sn9c102_pas202bca.c
+++ b/drivers/media/video/sn9c102/sn9c102_pas202bca.c
@@ -54,7 +54,7 @@
static int pas202bca_set_pix_format(struct sn9c102_device* cam,
- const struct v4l2_pix_format* pix)
+ const struct v4l2_pix_format* pix)
{
int err = 0;
@@ -68,7 +68,7 @@
static int pas202bca_set_ctrl(struct sn9c102_device* cam,
- const struct v4l2_control* ctrl)
+ const struct v4l2_control* ctrl)
{
int err = 0;
@@ -102,7 +102,7 @@
static int pas202bca_set_crop(struct sn9c102_device* cam,
- const struct v4l2_rect* rect)
+ const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &pas202bca;
int err = 0;
diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
index d068616..e3c1178 100644
--- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
+++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
@@ -58,8 +58,8 @@
}
-static int pas202bcb_get_ctrl(struct sn9c102_device* cam,
- struct v4l2_control* ctrl)
+static int pas202bcb_get_ctrl(struct sn9c102_device* cam,
+ struct v4l2_control* ctrl)
{
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
@@ -101,8 +101,8 @@
}
-static int pas202bcb_set_pix_format(struct sn9c102_device* cam,
- const struct v4l2_pix_format* pix)
+static int pas202bcb_set_pix_format(struct sn9c102_device* cam,
+ const struct v4l2_pix_format* pix)
{
int err = 0;
@@ -115,8 +115,8 @@
}
-static int pas202bcb_set_ctrl(struct sn9c102_device* cam,
- const struct v4l2_control* ctrl)
+static int pas202bcb_set_ctrl(struct sn9c102_device* cam,
+ const struct v4l2_control* ctrl)
{
int err = 0;
@@ -149,8 +149,8 @@
}
-static int pas202bcb_set_crop(struct sn9c102_device* cam,
- const struct v4l2_rect* rect)
+static int pas202bcb_set_crop(struct sn9c102_device* cam,
+ const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &pas202bcb;
int err = 0;
@@ -167,7 +167,7 @@
static struct sn9c102_sensor pas202bcb = {
.name = "PAS202BCB",
.maintainer = "Carlos Eduardo Medaglia Dyonisio "
- "<medaglia@undl.org.br>",
+ "<medaglia@undl.org.br>",
.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
.frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
.interface = SN9C102_I2C_2WIRES,
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 2afd9e9..2a874ee6 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -58,7 +58,7 @@
Probing functions: on success, you must attach the sensor to the camera
by calling sn9c102_attach_sensor() provided below.
To enable the I2C communication, you might need to perform a really basic
- initialization of the SN9C10X chip by using the write function declared
+ initialization of the SN9C10X chip by using the write function declared
ahead.
Functions must return 0 on success, the appropriate error otherwise.
*/
@@ -73,7 +73,7 @@
/*
Add the above entries to this table. Be sure to add the entry in the right
- place, since, on failure, the next probing routine is called according to
+ place, since, on failure, the next probing routine is called according to
the order of the list below, from top to bottom.
*/
#define SN9C102_SENSOR_TABLE \
@@ -94,9 +94,9 @@
sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id);
/* Attach a probed sensor to the camera. */
-extern void
+extern void
sn9c102_attach_sensor(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor);
+ struct sn9c102_sensor* sensor);
/*
Each SN9C10x camera has proper PID/VID identifiers.
@@ -105,7 +105,7 @@
*/
#define SN9C102_USB_DEVICE(vend, prod, intclass) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
- USB_DEVICE_ID_MATCH_INT_CLASS, \
+ USB_DEVICE_ID_MATCH_INT_CLASS, \
.idVendor = (vend), \
.idProduct = (prod), \
.bInterfaceClass = (intclass)
@@ -162,19 +162,19 @@
Read/write routines: they always return -1 on error, 0 or the read value
otherwise. NOTE that a real read operation is not supported by the SN9C10X
chip for some of its registers. To work around this problem, a pseudo-read
- call is provided instead: it returns the last successfully written value
+ call is provided instead: it returns the last successfully written value
on the register (0 if it has never been written), the usual -1 on error.
*/
/* The "try" I2C I/O versions are used when probing the sensor */
extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*,
- u8 address, u8 value);
+ u8 address, u8 value);
extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*,
- u8 address);
+ u8 address);
/*
These must be used if and only if the sensor doesn't implement the standard
- I2C protocol. There are a number of good reasons why you must use the
+ I2C protocol. There are a number of good reasons why you must use the
single-byte versions of these functions: do not abuse. The first function
writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C10X
chip. The second one programs the registers 0x09 and 0x10 with data0 and
@@ -184,12 +184,12 @@
byte.
*/
extern int sn9c102_i2c_try_raw_write(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 n,
- u8 data0, u8 data1, u8 data2, u8 data3,
- u8 data4, u8 data5);
+ struct sn9c102_sensor* sensor, u8 n,
+ u8 data0, u8 data1, u8 data2, u8 data3,
+ u8 data4, u8 data5);
extern int sn9c102_i2c_try_raw_read(struct sn9c102_device* cam,
- struct sn9c102_sensor* sensor, u8 data0,
- u8 data1, u8 n, u8 buffer[]);
+ struct sn9c102_sensor* sensor, u8 data0,
+ u8 data1, u8 n, u8 buffer[]);
/* To be used after the sensor struct has been attached to the camera struct */
extern int sn9c102_i2c_write(struct sn9c102_device*, u8 address, u8 value);
@@ -252,17 +252,17 @@
/*
NOTE: Where not noted,most of the functions below are not mandatory.
- Set to null if you do not implement them. If implemented,
- they must return 0 on success, the proper error otherwise.
+ Set to null if you do not implement them. If implemented,
+ they must return 0 on success, the proper error otherwise.
*/
int (*init)(struct sn9c102_device* cam);
/*
- This function will be called after the sensor has been attached.
+ This function will be called after the sensor has been attached.
It should be used to initialize the sensor only, but may also
configure part of the SN9C10X chip if necessary. You don't need to
setup picture settings like brightness, contrast, etc.. here, if
- the corrisponding controls are implemented (see below), since
+ the corrisponding controls are implemented (see below), since
they are adjusted in the core driver by calling the set_ctrl()
method after init(), where the arguments are the default values
specified in the v4l2_queryctrl list of supported controls;
@@ -273,13 +273,13 @@
struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS];
/*
- Optional list of default controls, defined as indicated in the
+ Optional list of default controls, defined as indicated in the
V4L2 API. Menu type controls are not handled by this interface.
*/
int (*get_ctrl)(struct sn9c102_device* cam, struct v4l2_control* ctrl);
int (*set_ctrl)(struct sn9c102_device* cam,
- const struct v4l2_control* ctrl);
+ const struct v4l2_control* ctrl);
/*
You must implement at least the set_ctrl method if you have defined
the list above. The returned value must follow the V4L2
@@ -306,7 +306,7 @@
specified in the cropcap substructures 'bounds' and 'defrect'.
By default, the source rectangle should cover the largest possible
area. Again, it is not always true that the largest source rectangle
- can cover the entire active window, although it is a rare case for
+ can cover the entire active window, although it is a rare case for
the hardware we have. The bounds of the source rectangle _must_ be
multiple of 16 and must use the same coordinate system as indicated
before; their centers shall align initially.
@@ -317,13 +317,13 @@
defined the correct default bounds in the structures.
See the V4L2 API for further details.
NOTE: once you have defined the bounds of the active window
- (struct cropcap.bounds) you must not change them.anymore.
+ (struct cropcap.bounds) you must not change them.anymore.
Only 'bounds' and 'defrect' fields are mandatory, other fields
will be ignored.
*/
int (*set_crop)(struct sn9c102_device* cam,
- const struct v4l2_rect* rect);
+ const struct v4l2_rect* rect);
/*
To be called on VIDIOC_C_SETCROP. The core module always calls a
default routine which configures the appropriate SN9C10X regs (also
@@ -332,12 +332,12 @@
case you override the default function, you always have to program
the chip to match those values; on error return the corresponding
error code without rolling back.
- NOTE: in case, you must program the SN9C10X chip to get rid of
- blank pixels or blank lines at the _start_ of each line or
- frame after each HSYNC or VSYNC, so that the image starts with
- real RGB data (see regs 0x12, 0x13) (having set H_SIZE and,
- V_SIZE you don't have to care about blank pixels or blank
- lines at the end of each line or frame).
+ NOTE: in case, you must program the SN9C10X chip to get rid of
+ blank pixels or blank lines at the _start_ of each line or
+ frame after each HSYNC or VSYNC, so that the image starts with
+ real RGB data (see regs 0x12, 0x13) (having set H_SIZE and,
+ V_SIZE you don't have to care about blank pixels or blank
+ lines at the end of each line or frame).
*/
struct v4l2_pix_format pix_format;
@@ -349,17 +349,17 @@
number of bits per pixel for uncompressed video, 8 or 9 (despite the
current value of 'pixelformat').
NOTE 1: both 'width' and 'height' _must_ be either 1/1 or 1/2 or 1/4
- of cropcap.defrect.width and cropcap.defrect.height. I
- suggest 1/1.
+ of cropcap.defrect.width and cropcap.defrect.height. I
+ suggest 1/1.
NOTE 2: The initial compression quality is defined by the first bit
- of reg 0x17 during the initialization of the image sensor.
+ of reg 0x17 during the initialization of the image sensor.
NOTE 3: as said above, you have to program the SN9C10X chip to get
- rid of any blank pixels, so that the output of the sensor
- matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR).
+ rid of any blank pixels, so that the output of the sensor
+ matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR).
*/
int (*set_pix_format)(struct sn9c102_device* cam,
- const struct v4l2_pix_format* pix);
+ const struct v4l2_pix_format* pix);
/*
To be called on VIDIOC_S_FMT, when switching from the SBGGR8 to
SN9C10X pixel format or viceversa. On error return the corresponding
diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c
index 2e08c55..294eb02 100644
--- a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c
+++ b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c
@@ -44,8 +44,8 @@
}
-static int tas5110c1b_set_ctrl(struct sn9c102_device* cam,
- const struct v4l2_control* ctrl)
+static int tas5110c1b_set_ctrl(struct sn9c102_device* cam,
+ const struct v4l2_control* ctrl)
{
int err = 0;
@@ -61,8 +61,8 @@
}
-static int tas5110c1b_set_crop(struct sn9c102_device* cam,
- const struct v4l2_rect* rect)
+static int tas5110c1b_set_crop(struct sn9c102_device* cam,
+ const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &tas5110c1b;
int err = 0;
@@ -81,8 +81,8 @@
}
-static int tas5110c1b_set_pix_format(struct sn9c102_device* cam,
- const struct v4l2_pix_format* pix)
+static int tas5110c1b_set_pix_format(struct sn9c102_device* cam,
+ const struct v4l2_pix_format* pix)
{
int err = 0;
diff --git a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c
index c7b3397..9ecb090 100644
--- a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c
+++ b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c
@@ -42,8 +42,8 @@
}
-static int tas5130d1b_set_ctrl(struct sn9c102_device* cam,
- const struct v4l2_control* ctrl)
+static int tas5130d1b_set_ctrl(struct sn9c102_device* cam,
+ const struct v4l2_control* ctrl)
{
int err = 0;
@@ -62,8 +62,8 @@
}
-static int tas5130d1b_set_crop(struct sn9c102_device* cam,
- const struct v4l2_rect* rect)
+static int tas5130d1b_set_crop(struct sn9c102_device* cam,
+ const struct v4l2_rect* rect)
{
struct sn9c102_sensor* s = &tas5130d1b;
u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 104,
@@ -82,8 +82,8 @@
}
-static int tas5130d1b_set_pix_format(struct sn9c102_device* cam,
- const struct v4l2_pix_format* pix)
+static int tas5130d1b_set_pix_format(struct sn9c102_device* cam,
+ const struct v4l2_pix_format* pix)
{
int err = 0;
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 9d76926..07476c7 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -1,4 +1,4 @@
-/*
+/*
* stradis.c - stradis 4:2:2 mpeg decoder driver
*
* Stradis 4:2:2 MPEG-2 Decoder Driver
@@ -1191,9 +1191,9 @@
}
/* clip_draw_rectangle(cm,x,y,w,h) -- handle clipping an area
- * bitmap is fixed width, 128 bytes (1024 pixels represented)
- * arranged most-sigificant-bit-left in 32-bit words
- * based on saa7146 clipping hardware, it swaps bytes if LE
+ * bitmap is fixed width, 128 bytes (1024 pixels represented)
+ * arranged most-sigificant-bit-left in 32-bit words
+ * based on saa7146 clipping hardware, it swaps bytes if LE
* much of this makes up for egcs brain damage -- so if you
* are wondering "why did he do this?" it is because the C
* was adjusted to generate the optimal asm output without
@@ -1259,7 +1259,7 @@
clip_draw_rectangle(clipmap, cr[i].x, cr[i].y,
cr[i].width, cr[i].height);
}
- /* clip against viewing window AND screen
+ /* clip against viewing window AND screen
so we do not have to rely on the user program
*/
clip_draw_rectangle(clipmap, (saa->win.x + width > saa->win.swidth) ?
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 9636da2..b38bda8 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -1,16 +1,16 @@
/*
* STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net)
- *
- * Thanks to STMicroelectronics for information on the usb commands, and
- * to Steve Miller at STM for his help and encouragement while I was
+ *
+ * Thanks to STMicroelectronics for information on the usb commands, and
+ * to Steve Miller at STM for his help and encouragement while I was
* writing this driver.
*
- * This driver is based heavily on the
+ * This driver is based heavily on the
* Endpoints (formerly known as AOX) se401 USB Camera Driver
* Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
*
* Still somewhat based on the Linux ov511 driver.
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -25,18 +25,18 @@
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * History:
- * ver 0.1 October, 2001. Initial attempt.
+ * History:
+ * ver 0.1 October, 2001. Initial attempt.
*
* ver 0.2 November, 2001. Fixed asbility to resize, added brightness
* function, made more stable (?)
*
- * ver 0.21 Nov, 2001. Added gamma correction and white balance,
- * due to Alexander Schwartz. Still trying to
+ * ver 0.21 Nov, 2001. Added gamma correction and white balance,
+ * due to Alexander Schwartz. Still trying to
* improve stablility. Moved stuff into stv680.h
*
- * ver 0.22 Nov, 2001. Added sharpen function (by Michael Sweet,
- * mike@easysw.com) from GIMP, also used in pencam.
+ * ver 0.22 Nov, 2001. Added sharpen function (by Michael Sweet,
+ * mike@easysw.com) from GIMP, also used in pencam.
* Simple, fast, good integer math routine.
*
* ver 0.23 Dec, 2001 (gkh)
@@ -44,11 +44,11 @@
* Lindent, and did other minor tweaks to get
* things to work properly with 2.5.1
*
- * ver 0.24 Jan, 2002 (kjs)
+ * ver 0.24 Jan, 2002 (kjs)
* Fixed the problem with webcam crashing after
- * two pictures. Changed the way pic is halved to
- * improve quality. Got rid of green line around
- * frame. Fix brightness reset when changing size
+ * two pictures. Changed the way pic is halved to
+ * improve quality. Got rid of green line around
+ * frame. Fix brightness reset when changing size
* bug. Adjusted gamma filters slightly.
*
* ver 0.25 Jan, 2002 (kjs)
@@ -484,7 +484,7 @@
PDEBUG (1, "STV(i): swapRGB is (forced) ON");
else if (swapRGB_on == -1)
PDEBUG (1, "STV(i): swapRGB is (forced) OFF");
-
+
if (stv_set_video_mode (stv680) < 0) {
PDEBUG (0, "STV(e): Could not set video mode in stv_init");
return -1;
@@ -570,7 +570,7 @@
if (stv680->brightness != p->brightness) {
stv680->chgbright = 1;
stv680->brightness = p->brightness;
- }
+ }
stv680->whiteness = p->whiteness; /* greyscale */
stv680->colour = p->colour;
@@ -612,7 +612,7 @@
case BUFFER_UNUSED:
memcpy (stv680->scratch[stv680->scratch_next].data,
- (unsigned char *) urb->transfer_buffer, length);
+ (unsigned char *) urb->transfer_buffer, length);
stv680->scratch[stv680->scratch_next].state = BUFFER_READY;
stv680->scratch[stv680->scratch_next].length = length;
if (waitqueue_active (&stv680->wq)) {
@@ -752,7 +752,7 @@
PDEBUG (1, "STV(e): request for non-supported size: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight);
return 1;
}
-
+
/* Stop a current stream and start it again at the new size */
if (wasstreaming)
stv680_stop_stream (stv680);
@@ -773,7 +773,7 @@
/*
* STV0680 Vision Camera Chipset Driver
- * Copyright (C) 2000 Adam Harrison <adam@antispin.org>
+ * Copyright (C) 2000 Adam Harrison <adam@antispin.org>
*/
#define RED 0
@@ -842,7 +842,7 @@
colour = 2;
break;
}
- i = (y * vw + x) * 3;
+ i = (y * vw + x) * 3;
*(output + i + colour) = (unsigned char) p;
} /* for x */
@@ -850,9 +850,9 @@
/****** gamma correction plus hardcoded white balance */
/* Thanks to Alexander Schwartx <alexander.schwartx@gmx.net> for this code.
- Correction values red[], green[], blue[], are generated by
- (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255.
- White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and
+ Correction values red[], green[], blue[], are generated by
+ (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255.
+ White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and
converted to unsigned char. Values are in stv680.h */
for (y = 0; y < vh; y++) {
diff --git a/drivers/media/video/stv680.h b/drivers/media/video/stv680.h
index ea46e00..a08f1b0 100644
--- a/drivers/media/video/stv680.h
+++ b/drivers/media/video/stv680.h
@@ -9,12 +9,12 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
@@ -152,76 +152,76 @@
static const unsigned char red[256] = {
- 0, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18,
- 18, 18, 18, 18, 18, 18, 18, 25, 30, 35, 38, 42,
- 44, 47, 50, 53, 54, 57, 59, 61, 63, 65, 67, 69,
- 71, 71, 73, 75, 77, 78, 80, 81, 82, 84, 85, 87,
- 88, 89, 90, 91, 93, 94, 95, 97, 98, 98, 99, 101,
- 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,
- 114, 115, 116, 116, 117, 118, 119, 120, 121, 122, 123, 124,
- 125, 125, 126, 127, 128, 129, 129, 130, 131, 132, 133, 134,
- 134, 135, 135, 136, 137, 138, 139, 140, 140, 141, 142, 143,
- 143, 143, 144, 145, 146, 147, 147, 148, 149, 150, 150, 151,
- 152, 152, 152, 153, 154, 154, 155, 156, 157, 157, 158, 159,
- 159, 160, 161, 161, 161, 162, 163, 163, 164, 165, 165, 166,
- 167, 167, 168, 168, 169, 170, 170, 170, 171, 171, 172, 173,
- 173, 174, 174, 175, 176, 176, 177, 178, 178, 179, 179, 179,
- 180, 180, 181, 181, 182, 183, 183, 184, 184, 185, 185, 186,
- 187, 187, 188, 188, 188, 188, 189, 190, 190, 191, 191, 192,
- 192, 193, 193, 194, 195, 195, 196, 196, 197, 197, 197, 197,
- 198, 198, 199, 199, 200, 201, 201, 202, 202, 203, 203, 204,
- 204, 205, 205, 206, 206, 206, 206, 207, 207, 208, 208, 209,
- 209, 210, 210, 211, 211, 212, 212, 213, 213, 214, 214, 215,
- 215, 215, 215, 216, 216, 217, 217, 218, 218, 218, 219, 219,
- 220, 220, 221, 221
-};
+ 0, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18,
+ 18, 18, 18, 18, 18, 18, 18, 25, 30, 35, 38, 42,
+ 44, 47, 50, 53, 54, 57, 59, 61, 63, 65, 67, 69,
+ 71, 71, 73, 75, 77, 78, 80, 81, 82, 84, 85, 87,
+ 88, 89, 90, 91, 93, 94, 95, 97, 98, 98, 99, 101,
+ 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,
+ 114, 115, 116, 116, 117, 118, 119, 120, 121, 122, 123, 124,
+ 125, 125, 126, 127, 128, 129, 129, 130, 131, 132, 133, 134,
+ 134, 135, 135, 136, 137, 138, 139, 140, 140, 141, 142, 143,
+ 143, 143, 144, 145, 146, 147, 147, 148, 149, 150, 150, 151,
+ 152, 152, 152, 153, 154, 154, 155, 156, 157, 157, 158, 159,
+ 159, 160, 161, 161, 161, 162, 163, 163, 164, 165, 165, 166,
+ 167, 167, 168, 168, 169, 170, 170, 170, 171, 171, 172, 173,
+ 173, 174, 174, 175, 176, 176, 177, 178, 178, 179, 179, 179,
+ 180, 180, 181, 181, 182, 183, 183, 184, 184, 185, 185, 186,
+ 187, 187, 188, 188, 188, 188, 189, 190, 190, 191, 191, 192,
+ 192, 193, 193, 194, 195, 195, 196, 196, 197, 197, 197, 197,
+ 198, 198, 199, 199, 200, 201, 201, 202, 202, 203, 203, 204,
+ 204, 205, 205, 206, 206, 206, 206, 207, 207, 208, 208, 209,
+ 209, 210, 210, 211, 211, 212, 212, 213, 213, 214, 214, 215,
+ 215, 215, 215, 216, 216, 217, 217, 218, 218, 218, 219, 219,
+ 220, 220, 221, 221
+};
static const unsigned char green[256] = {
- 0, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21,
- 21, 21, 21, 21, 21, 21, 21, 28, 34, 39, 43, 47,
- 50, 53, 56, 59, 61, 64, 66, 68, 71, 73, 75, 77,
- 79, 80, 82, 84, 86, 87, 89, 91, 92, 94, 95, 97,
- 98, 100, 101, 102, 104, 105, 106, 108, 109, 110, 111, 113,
- 114, 115, 116, 117, 118, 120, 121, 122, 123, 124, 125, 126,
- 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138,
- 139, 140, 141, 142, 143, 144, 144, 145, 146, 147, 148, 149,
- 150, 151, 151, 152, 153, 154, 155, 156, 156, 157, 158, 159,
- 160, 160, 161, 162, 163, 164, 164, 165, 166, 167, 167, 168,
- 169, 170, 170, 171, 172, 172, 173, 174, 175, 175, 176, 177,
- 177, 178, 179, 179, 180, 181, 182, 182, 183, 184, 184, 185,
- 186, 186, 187, 187, 188, 189, 189, 190, 191, 191, 192, 193,
- 193, 194, 194, 195, 196, 196, 197, 198, 198, 199, 199, 200,
- 201, 201, 202, 202, 203, 204, 204, 205, 205, 206, 206, 207,
- 208, 208, 209, 209, 210, 210, 211, 212, 212, 213, 213, 214,
- 214, 215, 215, 216, 217, 217, 218, 218, 219, 219, 220, 220,
- 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
- 227, 228, 228, 229, 229, 230, 230, 231, 231, 232, 232, 233,
- 233, 234, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239,
- 239, 240, 240, 241, 241, 242, 242, 243, 243, 243, 244, 244,
- 245, 245, 246, 246
-};
+ 0, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21,
+ 21, 21, 21, 21, 21, 21, 21, 28, 34, 39, 43, 47,
+ 50, 53, 56, 59, 61, 64, 66, 68, 71, 73, 75, 77,
+ 79, 80, 82, 84, 86, 87, 89, 91, 92, 94, 95, 97,
+ 98, 100, 101, 102, 104, 105, 106, 108, 109, 110, 111, 113,
+ 114, 115, 116, 117, 118, 120, 121, 122, 123, 124, 125, 126,
+ 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138,
+ 139, 140, 141, 142, 143, 144, 144, 145, 146, 147, 148, 149,
+ 150, 151, 151, 152, 153, 154, 155, 156, 156, 157, 158, 159,
+ 160, 160, 161, 162, 163, 164, 164, 165, 166, 167, 167, 168,
+ 169, 170, 170, 171, 172, 172, 173, 174, 175, 175, 176, 177,
+ 177, 178, 179, 179, 180, 181, 182, 182, 183, 184, 184, 185,
+ 186, 186, 187, 187, 188, 189, 189, 190, 191, 191, 192, 193,
+ 193, 194, 194, 195, 196, 196, 197, 198, 198, 199, 199, 200,
+ 201, 201, 202, 202, 203, 204, 204, 205, 205, 206, 206, 207,
+ 208, 208, 209, 209, 210, 210, 211, 212, 212, 213, 213, 214,
+ 214, 215, 215, 216, 217, 217, 218, 218, 219, 219, 220, 220,
+ 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
+ 227, 228, 228, 229, 229, 230, 230, 231, 231, 232, 232, 233,
+ 233, 234, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239,
+ 239, 240, 240, 241, 241, 242, 242, 243, 243, 243, 244, 244,
+ 245, 245, 246, 246
+};
static const unsigned char blue[256] = {
- 0, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,
- 23, 23, 23, 23, 23, 23, 23, 30, 37, 42, 47, 51,
- 55, 58, 61, 64, 67, 70, 72, 74, 78, 80, 82, 84,
- 86, 88, 90, 92, 94, 95, 97, 100, 101, 103, 104, 106,
- 107, 110, 111, 112, 114, 115, 116, 118, 119, 121, 122, 124,
- 125, 126, 127, 128, 129, 132, 133, 134, 135, 136, 137, 138,
- 139, 140, 141, 143, 144, 145, 146, 147, 148, 149, 150, 151,
- 152, 154, 155, 156, 157, 158, 158, 159, 160, 161, 162, 163,
- 165, 166, 166, 167, 168, 169, 170, 171, 171, 172, 173, 174,
- 176, 176, 177, 178, 179, 180, 180, 181, 182, 183, 183, 184,
- 185, 187, 187, 188, 189, 189, 190, 191, 192, 192, 193, 194,
- 194, 195, 196, 196, 198, 199, 200, 200, 201, 202, 202, 203,
- 204, 204, 205, 205, 206, 207, 207, 209, 210, 210, 211, 212,
- 212, 213, 213, 214, 215, 215, 216, 217, 217, 218, 218, 220,
- 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
- 228, 228, 229, 229, 231, 231, 232, 233, 233, 234, 234, 235,
- 235, 236, 236, 237, 238, 238, 239, 239, 240, 240, 242, 242,
- 243, 243, 244, 244, 245, 246, 246, 247, 247, 248, 248, 249,
- 249, 250, 250, 251, 251, 253, 253, 254, 254, 255, 255, 255,
- 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
- 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
- 255, 255, 255, 255
-};
+ 0, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,
+ 23, 23, 23, 23, 23, 23, 23, 30, 37, 42, 47, 51,
+ 55, 58, 61, 64, 67, 70, 72, 74, 78, 80, 82, 84,
+ 86, 88, 90, 92, 94, 95, 97, 100, 101, 103, 104, 106,
+ 107, 110, 111, 112, 114, 115, 116, 118, 119, 121, 122, 124,
+ 125, 126, 127, 128, 129, 132, 133, 134, 135, 136, 137, 138,
+ 139, 140, 141, 143, 144, 145, 146, 147, 148, 149, 150, 151,
+ 152, 154, 155, 156, 157, 158, 158, 159, 160, 161, 162, 163,
+ 165, 166, 166, 167, 168, 169, 170, 171, 171, 172, 173, 174,
+ 176, 176, 177, 178, 179, 180, 180, 181, 182, 183, 183, 184,
+ 185, 187, 187, 188, 189, 189, 190, 191, 192, 192, 193, 194,
+ 194, 195, 196, 196, 198, 199, 200, 200, 201, 202, 202, 203,
+ 204, 204, 205, 205, 206, 207, 207, 209, 210, 210, 211, 212,
+ 212, 213, 213, 214, 215, 215, 216, 217, 217, 218, 218, 220,
+ 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227,
+ 228, 228, 229, 229, 231, 231, 232, 233, 233, 234, 234, 235,
+ 235, 236, 236, 237, 238, 238, 239, 239, 240, 240, 242, 242,
+ 243, 243, 244, 244, 245, 246, 246, 247, 247, 248, 248, 249,
+ 249, 250, 250, 251, 251, 253, 253, 254, 254, 255, 255, 255,
+ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
+ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
+ 255, 255, 255, 255
+};
diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c
index 56e08e1..ef494fe 100644
--- a/drivers/media/video/tda9840.c
+++ b/drivers/media/video/tda9840.c
@@ -35,7 +35,7 @@
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define dprintk(args...) \
- do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
+ do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
#define SWITCH 0x00
#define LEVEL_ADJUST 0x02
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index 774ed0d..523df0b 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -37,7 +37,7 @@
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define dprintk(args...) \
- do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
+ do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
#define TEA6415C_NUM_INPUTS 8
#define TEA6415C_NUM_OUTPUTS 6
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index b4263b6..e0ff811 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -37,7 +37,7 @@
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define dprintk(args...) \
- do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
+ do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
/* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */
static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I2C_CLIENT_END };
diff --git a/drivers/media/video/tuner-3036.c b/drivers/media/video/tuner-3036.c
index c4a78e7..74ab48c 100644
--- a/drivers/media/video/tuner-3036.c
+++ b/drivers/media/video/tuner-3036.c
@@ -5,7 +5,7 @@
*
* The SAB3036 is just about different enough from the chips that
* tuner.c copes with to make it not worth the effort to crowbar
- * the support into that file. So instead we have a separate driver.
+ * the support into that file. So instead we have a separate driver.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -56,15 +56,15 @@
#define TUNER_FL 0x80
-static int
+static int
tuner_islocked (struct i2c_client *c)
{
- return (tuner_getstatus(c) & TUNER_FL);
+ return (tuner_getstatus(c) & TUNER_FL);
}
/* ---------------------------------------------------------------------- */
-static void
+static void
set_tv_freq(struct i2c_client *c, int freq)
{
u16 div = ((freq * 20) / 16);
@@ -73,26 +73,26 @@
if (debug)
printk(KERN_DEBUG "tuner: setting frequency %dMHz, divisor %x\n", freq / 16, div);
-
+
/* Select high tuning current */
buffer[0] = 0x29;
buffer[1] = 0x3e;
if (i2c_master_send(c, buffer, 2) != 2)
printk("tuner: i2c i/o error 1\n");
-
+
buffer[0] = 0x80 | ((div>>8) & 0x7f);
buffer[1] = div & 0xff;
if (i2c_master_send(c, buffer, 2) != 2)
printk("tuner: i2c i/o error 2\n");
-
+
while (!tuner_islocked(c) && time_before(jiffies, give_up))
schedule();
-
+
if (!tuner_islocked(c))
printk(KERN_WARNING "tuner: failed to achieve PLL lock\n");
-
+
/* Select low tuning current and engage AFC */
buffer[0] = 0x29;
buffer[1] = 0xb2;
@@ -106,7 +106,7 @@
/* ---------------------------------------------------------------------- */
-static int
+static int
tuner_attach(struct i2c_adapter *adap, int addr, int kind)
{
static unsigned char buffer[] = { 0x29, 0x32, 0x2a, 0, 0x2b, 0 };
@@ -116,18 +116,18 @@
if (this_adap > 0)
return -1;
this_adap++;
-
- client_template.adapter = adap;
- client_template.addr = addr;
+
+ client_template.adapter = adap;
+ client_template.addr = addr;
client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &client_template, sizeof(struct i2c_client));
+ if (client == NULL)
+ return -ENOMEM;
+ memcpy(client, &client_template, sizeof(struct i2c_client));
printk("tuner: SAB3036 found, status %02x\n", tuner_getstatus(client));
- i2c_attach_client(client);
+ i2c_attach_client(client);
if (i2c_master_send(client, buffer, 2) != 2)
printk("tuner: i2c i/o error 1\n");
@@ -138,30 +138,30 @@
return 0;
}
-static int
+static int
tuner_detach(struct i2c_client *c)
{
return 0;
}
-static int
+static int
tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
int *iarg = (int*)arg;
- switch (cmd)
+ switch (cmd)
{
case VIDIOCSFREQ:
set_tv_freq(client, *iarg);
break;
-
+
default:
return -EINVAL;
}
return 0;
}
-static int
+static int
tuner_probe(struct i2c_adapter *adap)
{
this_adap = 0;
@@ -172,8 +172,8 @@
/* ----------------------------------------------------------------------- */
-static struct i2c_driver
-i2c_driver_tuner =
+static struct i2c_driver
+i2c_driver_tuner =
{
.driver = {
.name = "sab3036",
@@ -186,7 +186,7 @@
static struct i2c_client client_template =
{
- .driver = &i2c_driver_tuner,
+ .driver = &i2c_driver_tuner,
.name = "SAB3036",
};
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
index a42c222..76f771b 100644
--- a/drivers/media/video/usbvideo/ibmcam.c
+++ b/drivers/media/video/usbvideo/ibmcam.c
@@ -1300,11 +1300,11 @@
/*
* ibmcam_model3_Packet1()
*
- * 00_0078_012d
+ * 00_0078_012d
* 00_0097_012f
- * 00_d141_0124
+ * 00_d141_0124
* 00_0096_0127
- * 00_fea8_0124
+ * 00_fea8_0124
*/
static void ibmcam_model3_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2)
{
@@ -2687,7 +2687,7 @@
ibmcam_veio(uvd, 0, 0x0004, 0x0127);
ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
- break;
+ break;
}
usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
}
@@ -3238,7 +3238,7 @@
{0, 0x0062, 0x0107},
{0, 0x0003, 0x0111},
};
-#define NUM_INIT_DATA
+#define NUM_INIT_DATA
unsigned short compression = 0; /* 0=none, 7=best frame rate */
int f_rate; /* 0=Fastest 7=slowest */
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
index e2ede58..c11f5d4 100644
--- a/drivers/media/video/usbvideo/konicawc.c
+++ b/drivers/media/video/usbvideo/konicawc.c
@@ -36,7 +36,7 @@
enum ctrl_req {
SetWhitebal = 0x01,
SetBrightness = 0x02,
- SetSharpness = 0x03,
+ SetSharpness = 0x03,
SetContrast = 0x04,
SetSaturation = 0x05,
};
@@ -47,7 +47,7 @@
SIZE_160X136 = 1,
SIZE_176X144 = 2,
SIZE_320X240 = 3,
-
+
};
#define MAX_FRAME_SIZE SIZE_320X240
@@ -69,7 +69,7 @@
/* Some default values for initial camera settings,
can be set by modprobe */
-static int size;
+static int size;
static int speed = 6; /* Speed (fps) 0 (slowest) to 6 (fastest) */
static int brightness = MAX_BRIGHTNESS/2;
static int contrast = MAX_CONTRAST/2;
@@ -132,24 +132,24 @@
static int konicawc_ctrl_msg(struct uvd *uvd, u8 dir, u8 request, u16 value, u16 index, void *buf, int len)
{
- int retval = usb_control_msg(uvd->dev,
+ int retval = usb_control_msg(uvd->dev,
dir ? usb_rcvctrlpipe(uvd->dev, 0) : usb_sndctrlpipe(uvd->dev, 0),
request, 0x40 | dir, value, index, buf, len, 1000);
- return retval < 0 ? retval : 0;
+ return retval < 0 ? retval : 0;
}
static inline void konicawc_camera_on(struct uvd *uvd)
{
- DEBUG(0, "camera on");
- konicawc_set_misc(uvd, 0x2, 1, 0x0b);
+ DEBUG(0, "camera on");
+ konicawc_set_misc(uvd, 0x2, 1, 0x0b);
}
static inline void konicawc_camera_off(struct uvd *uvd)
{
- DEBUG(0, "camera off");
- konicawc_set_misc(uvd, 0x2, 0, 0x0b);
+ DEBUG(0, "camera off");
+ konicawc_set_misc(uvd, 0x2, 0, 0x0b);
}
@@ -317,7 +317,7 @@
button = !!(sts & 0x40);
sts &= ~0x40;
}
-
+
/* work out the button status, but don't do
anything with it for now */
@@ -331,7 +331,7 @@
discard++;
continue;
}
-
+
if((sts > 0x01) && (sts < 0x80)) {
info("unknown status %2.2x", sts);
bad++;
@@ -350,7 +350,7 @@
DEBUG(2, "found initial image");
cam->lastframe = -1;
}
-
+
marker[3] = sts & 0x7F;
RingQueue_Enqueue(&uvd->dp, marker, 4);
totlen += 4;
@@ -367,16 +367,16 @@
static void resubmit_urb(struct uvd *uvd, struct urb *urb)
{
- int i, ret;
- for (i = 0; i < FRAMES_PER_DESC; i++) {
- urb->iso_frame_desc[i].status = 0;
- }
- urb->dev = uvd->dev;
- urb->status = 0;
+ int i, ret;
+ for (i = 0; i < FRAMES_PER_DESC; i++) {
+ urb->iso_frame_desc[i].status = 0;
+ }
+ urb->dev = uvd->dev;
+ urb->status = 0;
ret = usb_submit_urb(urb, GFP_ATOMIC);
DEBUG(3, "submitting urb of length %d", urb->transfer_buffer_length);
- if(ret)
- err("usb_submit_urb error (%d)", ret);
+ if(ret)
+ err("usb_submit_urb error (%d)", ret);
}
@@ -490,7 +490,7 @@
}
cam->last_data_urb = NULL;
-
+
/* Submit all URBs */
for (i=0; i < USBVIDEO_NUMSBUF; i++) {
errFlag = usb_submit_urb(cam->sts_urb[i], GFP_KERNEL);
@@ -539,7 +539,7 @@
static void konicawc_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame)
-{
+{
struct konicawc *cam = (struct konicawc *)uvd->user_data;
int maxline = cam->maxline;
int yplanesz = cam->yplanesz;
@@ -583,13 +583,13 @@
if(frame->scanstate == ScanState_Scanning)
return;
-
+
/* Try to move data from queue into frame buffer
* We get data in blocks of 384 bytes made up of:
* 256 Y, 64 U, 64 V.
* This needs to be written out as a Y plane, a U plane and a V plane.
*/
-
+
while ( frame->curline < maxline && (RingQueue_GetLength(&uvd->dp) >= 384)) {
/* Y */
RingQueue_Dequeue(&uvd->dp, frame->data + (frame->curline * 256), 256);
diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c
index 75ff755..10c58b4 100644
--- a/drivers/media/video/usbvideo/ultracam.c
+++ b/drivers/media/video/usbvideo/ultracam.c
@@ -23,7 +23,7 @@
typedef struct {
int initialized; /* Had we already sent init sequence? */
int camera_model; /* What type of IBM camera we got? */
- int has_hdr;
+ int has_hdr;
} ultracam_t;
#define ULTRACAM_T(uvd) ((ultracam_t *)((uvd)->user_data))
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c
index 0b51fae..13b37c8 100644
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ b/drivers/media/video/usbvideo/usbvideo.c
@@ -574,7 +574,7 @@
} else {
/* Just the blue screen */
}
-
+
*f++ = cb;
*f++ = cg;
*f++ = cr;
@@ -1243,7 +1243,7 @@
#if USBVIDEO_REPORT_STATS
usbvideo_ReportStatistics(uvd);
-#endif
+#endif
uvd->user--;
if (uvd->remove_pending) {
@@ -1290,7 +1290,7 @@
return 0;
}
case VIDIOCSCHAN:
- {
+ {
struct video_channel *v = arg;
if (v->channel != 0)
return -EINVAL;
@@ -1347,7 +1347,7 @@
vw->chromakey = 0;
if (VALID_CALLBACK(uvd, getFPS))
vw->flags = GET_CALLBACK(uvd, getFPS)(uvd);
- else
+ else
vw->flags = 10; /* FIXME: do better! */
return 0;
}
@@ -1359,7 +1359,7 @@
memset(vm, 0, sizeof(*vm));
vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES;
vm->frames = USBVIDEO_NUMFRAMES;
- for(i = 0; i < USBVIDEO_NUMFRAMES; i++)
+ for(i = 0; i < USBVIDEO_NUMFRAMES; i++)
vm->offsets[i] = i * uvd->max_frame_size;
return 0;
@@ -1425,7 +1425,7 @@
if (*frameNum < 0 || *frameNum >= USBVIDEO_NUMFRAMES)
return -EINVAL;
-
+
if (uvd->debug >= 1)
info("VIDIOCSYNC: syncing to frame %d.", *frameNum);
if (uvd->flags & FLAGS_NO_DECODING)
@@ -1454,8 +1454,8 @@
struct video_buffer *vb = arg;
memset(vb, 0, sizeof(*vb));
- return 0;
- }
+ return 0;
+ }
case VIDIOCKEY:
return 0;
@@ -1704,7 +1704,7 @@
info("Not streaming, but interrupt!");
return;
}
-
+
uvd->stats.urb_count++;
if (urb->actual_length <= 0)
goto urb_done_with;
@@ -1763,7 +1763,7 @@
}
if (VALID_CALLBACK(uvd, videoStart))
GET_CALLBACK(uvd, videoStart)(uvd);
- else
+ else
err("%s: videoStart not set", __FUNCTION__);
/* We double buffer the Iso lists */
@@ -1830,7 +1830,7 @@
/* Invoke minidriver's magic to stop the camera */
if (VALID_CALLBACK(uvd, videoStop))
GET_CALLBACK(uvd, videoStop)(uvd);
- else
+ else
err("%s: videoStop not set", __FUNCTION__);
/* Set packet size to 0 */
@@ -1963,14 +1963,14 @@
info("%s($%p,%d.)", __FUNCTION__, uvd, frameNum);
switch (frame->frameState) {
- case FrameState_Unused:
+ case FrameState_Unused:
if (uvd->debug >= 2)
info("%s: FrameState_Unused", __FUNCTION__);
return -EINVAL;
- case FrameState_Ready:
- case FrameState_Grabbing:
- case FrameState_Error:
- {
+ case FrameState_Ready:
+ case FrameState_Grabbing:
+ case FrameState_Error:
+ {
int ntries, signalPending;
redo:
if (!CAMERA_IS_OPERATIONAL(uvd)) {
@@ -1978,7 +1978,7 @@
info("%s: Camera is not operational (1)", __FUNCTION__);
return -EIO;
}
- ntries = 0;
+ ntries = 0;
do {
RingQueue_InterruptibleSleepOn(&uvd->dp);
signalPending = signal_pending(current);
@@ -2010,7 +2010,7 @@
usbvideo_CollectRawData(uvd, frame);
else if (VALID_CALLBACK(uvd, processData))
GET_CALLBACK(uvd, processData)(uvd, frame);
- else
+ else
err("%s: processData not set", __FUNCTION__);
}
} while (frame->frameState == FrameState_Grabbing);
@@ -2027,8 +2027,8 @@
goto redo;
}
/* Note that we fall through to meet our destiny below */
- }
- case FrameState_Done:
+ }
+ case FrameState_Done:
/*
* Do all necessary postprocessing of data prepared in
* "interrupt" code and the collecting code above. The
@@ -2157,7 +2157,7 @@
* History:
* 09-Feb-2001 Created.
*/
-static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
+static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
struct usbvideo_frame *frame)
{
int i, j, v4l_linesize;
diff --git a/drivers/media/video/usbvideo/usbvideo.h b/drivers/media/video/usbvideo/usbvideo.h
index 135433c..3cbf4fc 100644
--- a/drivers/media/video/usbvideo/usbvideo.h
+++ b/drivers/media/video/usbvideo/usbvideo.h
@@ -189,11 +189,11 @@
/* Statistics that can be overlaid on screen */
struct usbvideo_statistics {
- unsigned long frame_num; /* Sequential number of the frame */
- unsigned long urb_count; /* How many URBs we received so far */
- unsigned long urb_length; /* Length of last URB */
- unsigned long data_count; /* How many bytes we received */
- unsigned long header_count; /* How many frame headers we found */
+ unsigned long frame_num; /* Sequential number of the frame */
+ unsigned long urb_count; /* How many URBs we received so far */
+ unsigned long urb_length; /* Length of last URB */
+ unsigned long data_count; /* How many bytes we received */
+ unsigned long header_count; /* How many frame headers we found */
unsigned long iso_skip_count; /* How many empty ISO packets received */
unsigned long iso_err_count; /* How many bad ISO packets received */
};
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 1d06e53..90d48e8 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -69,10 +69,10 @@
#define VICAM_HEADER_SIZE 64
#define clamp( x, l, h ) max_t( __typeof__( x ), \
- ( l ), \
- min_t( __typeof__( x ), \
- ( h ), \
- ( x ) ) )
+ ( l ), \
+ min_t( __typeof__( x ), \
+ ( h ), \
+ ( x ) ) )
/* Not sure what all the bytes in these char
* arrays do, but they're necessary to make
@@ -357,7 +357,7 @@
* Not sure why these are not yet non-statics which I can reference through
* usbvideo.h the same as it is in 2.4.20. I bet this will get fixed sometime
* in the future.
- *
+ *
*/
static void *rvmalloc(unsigned long size)
{
@@ -603,12 +603,12 @@
case VIDIOCSPICT:
{
struct video_picture vp;
-
+
if (copy_from_user(&vp, user_arg, sizeof(vp))) {
retval = -EFAULT;
break;
}
-
+
DBG("VIDIOCSPICT depth = %d, pal = %d\n", vp.depth,
vp.palette);
@@ -655,7 +655,7 @@
}
DBG("VIDIOCSWIN %d x %d\n", vw.width, vw.height);
-
+
if ( vw.width != 320 || vw.height != 240 )
retval = -EFAULT;
@@ -809,12 +809,12 @@
cam->needsDummyRead = 1;
cam->open_count++;
- file->private_data = cam;
-
+ file->private_data = cam;
+
return 0;
}
-static int
+static int
vicam_close(struct inode *inode, struct file *file)
{
struct vicam_camera *cam = file->private_data;
@@ -1187,7 +1187,7 @@
if ( !cam->proc_dir )
return; // FIXME: We should probably return an error here
-
+
ent = create_proc_entry("shutter", S_IFREG | S_IRUGO | S_IWUSR,
cam->proc_dir);
if (ent) {
@@ -1282,7 +1282,7 @@
const struct usb_host_interface *interface;
const struct usb_endpoint_descriptor *endpoint;
struct vicam_camera *cam;
-
+
printk(KERN_INFO "ViCam based webcam connected\n");
interface = intf->cur_altsetting;
@@ -1331,7 +1331,7 @@
printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor);
usb_set_intfdata (intf, cam);
-
+
return 0;
}
diff --git a/drivers/media/video/videocodec.h b/drivers/media/video/videocodec.h
index b1239ac..8c23372 100644
--- a/drivers/media/video/videocodec.h
+++ b/drivers/media/video/videocodec.h
@@ -57,7 +57,7 @@
therfor they may not be initialized.
The other fuctions are just for convenience, as they are for sure used by
- most/all of the codecs. The last ones may be ommited, too.
+ most/all of the codecs. The last ones may be ommited, too.
See the structure declaration below for more information and which data has
to be set up for the master and the slave.
@@ -75,52 +75,52 @@
/* ========================================== */
/*
- ==== master setup ====
+ ==== master setup ====
name -> name of the device structure for reference and debugging
master_data -> data ref. for the master (e.g. the zr36055,57,67)
readreg -> ref. to read-fn from register (setup by master, used by slave)
writereg -> ref. to write-fn to register (setup by master, used by slave)
- this two functions do the lowlevel I/O job
+ this two functions do the lowlevel I/O job
- ==== slave functionality setup ====
- slave_data -> data ref. for the slave (e.g. the zr36050,60)
+ ==== slave functionality setup ====
+ slave_data -> data ref. for the slave (e.g. the zr36050,60)
check -> fn-ref. checks availability of an device, returns -EIO on failure or
- the type on success
- this makes espcecially sense if a driver module supports more than
- one codec which may be quite similar to access, nevertheless it
- is good for a first functionality check
+ the type on success
+ this makes espcecially sense if a driver module supports more than
+ one codec which may be quite similar to access, nevertheless it
+ is good for a first functionality check
- -- main functions you always need for compression/decompression --
+ -- main functions you always need for compression/decompression --
set_mode -> this fn-ref. resets the entire codec, and sets up the mode
- with the last defined norm/size (or device default if not
- available) - it returns 0 if the mode is possible
+ with the last defined norm/size (or device default if not
+ available) - it returns 0 if the mode is possible
set_size -> this fn-ref. sets the norm and image size for
- compression/decompression (returns 0 on success)
- the norm param is defined in videodev.h (VIDEO_MODE_*)
+ compression/decompression (returns 0 on success)
+ the norm param is defined in videodev.h (VIDEO_MODE_*)
additional setup may be available, too - but the codec should work with
- some default values even without this
+ some default values even without this
- set_data -> sets device-specific data (tables, quality etc.)
- get_data -> query device-specific data (tables, quality etc.)
+ set_data -> sets device-specific data (tables, quality etc.)
+ get_data -> query device-specific data (tables, quality etc.)
- if the device delivers interrupts, they may be setup/handled here
- setup_interrupt -> codec irq setup (not needed for 36050/60)
- handle_interrupt -> codec irq handling (not needed for 36050/60)
+ if the device delivers interrupts, they may be setup/handled here
+ setup_interrupt -> codec irq setup (not needed for 36050/60)
+ handle_interrupt -> codec irq handling (not needed for 36050/60)
- if the device delivers pictures, they may be handled here
- put_image -> puts image data to the codec (not needed for 36050/60)
- get_image -> gets image data from the codec (not needed for 36050/60)
- the calls include frame numbers and flags (even/odd/...)
- if needed and a flag which allows blocking until its ready
+ if the device delivers pictures, they may be handled here
+ put_image -> puts image data to the codec (not needed for 36050/60)
+ get_image -> gets image data from the codec (not needed for 36050/60)
+ the calls include frame numbers and flags (even/odd/...)
+ if needed and a flag which allows blocking until its ready
*/
/* ============== */
/* user interface */
/* ============== */
-/*
+/*
Currently there is only a information display planned, as the layer
is not visible for the user space at all.
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 0229819..a8c1014 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -1555,12 +1555,12 @@
unsigned int w = vcs->clipping.right - vcs->clipping.left;
unsigned int d = vcs->decimation;
unsigned int bpp = vino_data_formats[vcs->data_format].bpp;
- unsigned int lsize;
+ unsigned int lsize;
dprintk("update_line_size(): before: w = %d, d = %d, "
"line_size = %d\n", w, d, vcs->line_size);
- /* line size must be multiple of 8 bytes */
+ /* line size must be multiple of 8 bytes */
lsize = (bpp * (w / d)) & ~7;
w = (lsize / bpp) * d;
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 4cd5799..40b205b 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -1,4 +1,4 @@
-/*
+/*
* vpx3220a, vpx3216b & vpx3214c video decoder driver version 0.0.1
*
* Copyright (C) 2001 Laurent Pinchart <lpinchart@freegates.be>
@@ -176,8 +176,8 @@
static int
vpx3220_write_fp_block (struct i2c_client *client,
- const u16 *data,
- unsigned int len)
+ const u16 *data,
+ unsigned int len)
{
u8 reg;
int ret = 0;
@@ -316,7 +316,7 @@
vpx3220_write_fp_block(client, init_fp,
sizeof(init_fp) >> 1);
switch (decoder->norm) {
-
+
case VIDEO_MODE_NTSC:
vpx3220_write_fp_block(client, init_ntsc,
sizeof(init_ntsc) >> 1);
@@ -324,7 +324,7 @@
case VIDEO_MODE_PAL:
vpx3220_write_fp_block(client, init_pal,
- sizeof(init_pal) >> 1);
+ sizeof(init_pal) >> 1);
break;
case VIDEO_MODE_SECAM:
vpx3220_write_fp_block(client, init_secam,
@@ -332,10 +332,10 @@
break;
default:
vpx3220_write_fp_block(client, init_pal,
- sizeof(init_pal) >> 1);
+ sizeof(init_pal) >> 1);
break;
}
- }
+ }
break;
case DECODER_DUMP:
@@ -411,7 +411,7 @@
/* Here we back up the input selection because it gets
overwritten when we fill the registers with the
- choosen video norm */
+ choosen video norm */
temp_input = vpx3220_fp_read(client, 0xf2);
dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n",
@@ -578,7 +578,7 @@
};
static unsigned short ignore = I2C_CLIENT_END;
-
+
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
@@ -661,7 +661,7 @@
break;
default:
dprintk(1,
- KERN_INFO
+ KERN_INFO
"%s: Wrong part number (0x%04x)\n",
__func__, pn);
kfree(client);
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index b7b0aff..80ef8a1 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -26,7 +26,7 @@
Does any other model using the w9966 interface chip exist ?
Todo:
-
+
*Add a working EPP mode, since DMA ECP read isn't implemented
in the parport drivers. (That's why it's so sloow)
@@ -47,9 +47,9 @@
*Probably some bugs that I don't know of
Please support me by sending feedback!
-
+
Changes:
-
+
Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE
and owner support for newer module locks
*/
@@ -204,7 +204,7 @@
*/
-// Set camera phase flags, so we know what to uninit when terminating
+// Set camera phase flags, so we know what to uninit when terminating
static inline void w9966_setState(struct w9966_dev* cam, int mask, int val)
{
cam->dev_state = (cam->dev_state & ~mask) ^ val;
@@ -233,7 +233,7 @@
parport_release(cam->pdev);
w9966_setState(cam, W9966_STATE_CLAIMED, 0);
}
-
+
// Read register from W9966 interface-chip
// Expects a claimed pdev
// -1 on error, else register data (byte)
@@ -242,7 +242,7 @@
// ECP, read, regtransfer, REG, REG, REG, REG, REG
const unsigned char addr = 0x80 | (reg & 0x1f);
unsigned char val;
-
+
if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
return -1;
if (parport_write(cam->pport, &addr, 1) != 1)
@@ -263,7 +263,7 @@
// ECP, write, regtransfer, REG, REG, REG, REG, REG
const unsigned char addr = 0xc0 | (reg & 0x1f);
const unsigned char val = data;
-
+
if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
return -1;
if (parport_write(cam->pport, &addr, 1) != 1)
@@ -284,7 +284,7 @@
{
if (cam->dev_state != 0)
return -1;
-
+
cam->pport = port;
cam->brightness = 128;
cam->contrast = 64;
@@ -302,7 +302,7 @@
cam->ppmode = IEEE1284_MODE_EPP;
else
cam->ppmode = IEEE1284_MODE_ECP;
- break;
+ break;
case 1: // hw- or sw-ecp
cam->ppmode = IEEE1284_MODE_ECP;
break;
@@ -310,7 +310,7 @@
cam->ppmode = IEEE1284_MODE_EPP;
break;
}
-
+
// Tell the parport driver that we exists
cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL);
if (cam->pdev == NULL) {
@@ -320,7 +320,7 @@
w9966_setState(cam, W9966_STATE_PDEV, W9966_STATE_PDEV);
w9966_pdev_claim(cam);
-
+
// Setup a default capture mode
if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) {
DPRINTF("w9966_setup() failed.\n");
@@ -333,11 +333,11 @@
memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device));
cam->vdev.priv = cam;
- if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)
+ if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)
return -1;
-
+
w9966_setState(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
-
+
// All ok
printk(
"w9966cf: Found and initialized a webcam on %s.\n",
@@ -391,7 +391,7 @@
// Only continue as long as we keep getting better values
if (err > besterr)
break;
-
+
besterr = err;
bestlen = len;
}
@@ -399,7 +399,7 @@
return bestlen;
}
-// Modify capture window (if necessary)
+// Modify capture window (if necessary)
// and calculate downscaling
// Return -1 on error
static int w9966_calcscale(int size, int min, int max, int* beg, int* end, unsigned char* factor)
@@ -407,7 +407,7 @@
int maxlen = max - min;
int len = *end - *beg + 1;
int newlen = w9966_findlen(len, size, maxlen);
- int err = newlen - len;
+ int err = newlen - len;
// Check for bad format
if (newlen > maxlen || newlen < size)
@@ -452,8 +452,8 @@
0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0
};
-
-
+
+
if (w*h*2 > W9966_SRAMSIZE)
{
DPRINTF("capture window exceeds SRAM size!.\n");
@@ -469,9 +469,9 @@
cam->width = w;
cam->height = h;
- enh_s = 0;
+ enh_s = 0;
enh_e = w*h*2;
-
+
// Modify capture window if necessary and calculate downscaling
if (
w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 ||
@@ -482,14 +482,14 @@
"%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n",
w, h, x1, x2, y1, y2, scale_x&~0x80, scale_y&~0x80
);
-
+
// Setup registers
regs[0x00] = 0x00; // Set normal operation
regs[0x01] = 0x18; // Capture mode
regs[0x02] = scale_y; // V-scaling
regs[0x03] = scale_x; // H-scaling
-
- // Capture window
+
+ // Capture window
regs[0x04] = (x1 & 0x0ff); // X-start (8 low bits)
regs[0x05] = (x1 & 0x300)>>8; // X-start (2 high bits)
regs[0x06] = (y1 & 0x0ff); // Y-start (8 low bits)
@@ -499,7 +499,7 @@
regs[0x0a] = (y2 & 0x0ff); // Y-end (8 low bits)
regs[0x0c] = W9966_SRAMID; // SRAM-banks (1x 128kb)
-
+
// Enhancement layer
regs[0x0d] = (enh_s& 0x000ff); // Enh. start (0-7)
regs[0x0e] = (enh_s& 0x0ff00)>>8; // Enh. start (8-15)
@@ -515,7 +515,7 @@
regs[0x19] = 0xff; // I/O port direction control
regs[0x1a] = 0xff; // I/O port data register
regs[0x1b] = 0x10; // ???
-
+
// SAA7111 chip settings
saa7111_regs[0x0a] = cam->brightness;
saa7111_regs[0x0b] = cam->contrast;
@@ -551,7 +551,7 @@
cam->i2c_state |= W9966_I2C_W_DATA;
else
cam->i2c_state &= ~W9966_I2C_W_DATA;
-
+
w9966_wReg(cam, 0x18, cam->i2c_state);
udelay(5);
}
@@ -577,7 +577,7 @@
w9966_wReg(cam, 0x18, cam->i2c_state);
udelay(5);
-
+
// we go to high, we also expect the peripheral to ack.
if (state) {
timeout = jiffies + 100;
@@ -607,16 +607,16 @@
w9966_i2c_setsda(cam, (data >> i) & 0x01);
if (w9966_i2c_setscl(cam, 1) == -1)
- return -1;
+ return -1;
w9966_i2c_setscl(cam, 0);
}
w9966_i2c_setsda(cam, 1);
-
+
if (w9966_i2c_setscl(cam, 1) == -1)
return -1;
w9966_i2c_setscl(cam, 0);
-
+
return 0;
}
@@ -626,8 +626,8 @@
static int w9966_i2c_rbyte(struct w9966_dev* cam)
{
unsigned char data = 0x00;
- int i;
-
+ int i;
+
w9966_i2c_setsda(cam, 1);
for (i = 0; i < 8; i++)
@@ -637,7 +637,7 @@
data = data << 1;
if (w9966_i2c_getsda(cam))
data |= 0x01;
-
+
w9966_i2c_setscl(cam, 0);
}
return data;
@@ -673,11 +673,11 @@
return -1;
w9966_i2c_setsda(cam, 0);
-
+
if (w9966_i2c_setscl(cam, 1) == -1)
return -1;
w9966_i2c_setsda(cam, 1);
-
+
return data;
}
#endif
@@ -699,7 +699,7 @@
w9966_i2c_setsda(cam, 0);
if (w9966_i2c_setscl(cam, 1) == -1)
return -1;
-
+
w9966_i2c_setsda(cam, 1);
return 0;
@@ -714,7 +714,7 @@
{
struct video_device *vdev = video_devdata(file);
struct w9966_dev *cam = vdev->priv;
-
+
switch(cmd)
{
case VIDIOCGCAP:
@@ -790,14 +790,14 @@
struct video_picture *vpic = arg;
if (vpic->depth != 16 || vpic->palette != VIDEO_PALETTE_YUV422)
return -EINVAL;
-
+
cam->brightness = vpic->brightness >> 8;
cam->hue = (vpic->hue >> 8) - 128;
cam->color = vpic->colour >> 9;
cam->contrast = vpic->contrast >> 9;
w9966_pdev_claim(cam);
-
+
if (
w9966_wReg_i2c(cam, 0x0a, cam->brightness) == -1 ||
w9966_wReg_i2c(cam, 0x0b, cam->contrast) == -1 ||
@@ -807,7 +807,7 @@
w9966_pdev_release(cam);
return -EIO;
}
-
+
w9966_pdev_release(cam);
return 0;
}
@@ -815,13 +815,13 @@
{
int ret;
struct video_window *vwin = arg;
-
+
if (vwin->flags != 0)
return -EINVAL;
if (vwin->clipcount != 0)
return -EINVAL;
if (vwin->width < 2 || vwin->width > W9966_WND_MAX_W)
- return -EINVAL;
+ return -EINVAL;
if (vwin->height < 1 || vwin->height > W9966_WND_MAX_H)
return -EINVAL;
@@ -829,12 +829,12 @@
w9966_pdev_claim(cam);
ret = w9966_setup(cam, 0, 0, 1023, 1023, vwin->width, vwin->height);
w9966_pdev_release(cam);
-
+
if (ret != 0) {
DPRINTF("VIDIOCSWIN: w9966_setup() failed.\n");
return -EIO;
}
-
+
return 0;
}
case VIDIOCGWIN:
@@ -846,7 +846,7 @@
return 0;
}
// Unimplemented
- case VIDIOCCAPTURE:
+ case VIDIOCCAPTURE:
case VIDIOCGFBUF:
case VIDIOCSFBUF:
case VIDIOCKEY:
@@ -877,17 +877,17 @@
unsigned char __user *dest = (unsigned char __user *)buf;
unsigned long dleft = count;
unsigned char *tbuf;
-
+
// Why would anyone want more than this??
if (count > cam->width * cam->height * 2)
return -EINVAL;
-
+
w9966_pdev_claim(cam);
w9966_wReg(cam, 0x00, 0x02); // Reset ECP-FIFO buffer
w9966_wReg(cam, 0x00, 0x00); // Return to normal operation
w9966_wReg(cam, 0x01, 0x98); // Enable capture
- // write special capture-addr and negotiate into data transfer
+ // write special capture-addr and negotiate into data transfer
if (
(parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0 )||
(parport_write(cam->pport, &addr, 1) != 1 )||
@@ -906,7 +906,7 @@
while(dleft > 0)
{
unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft;
-
+
if (parport_read(cam->pport, tbuf, tsize) < tsize) {
count = -EFAULT;
goto out;
@@ -933,7 +933,7 @@
static void w9966_attach(struct parport *port)
{
int i;
-
+
for (i = 0; i < W9966_MAXCAMS; i++)
{
if (w9966_cams[i].dev_state != 0) // Cam is already assigned
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index b57dec3..20f211b 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -71,39 +71,39 @@
static int ovmod_load = W9968CF_OVMOD_LOAD;
static unsigned short simcams = W9968CF_SIMCAMS;
static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
-static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_PACKET_SIZE};
-static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_BUFFERS};
-static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_DOUBLE_BUFFER};
+static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+ W9968CF_PACKET_SIZE};
+static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+ W9968CF_BUFFERS};
+static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+ W9968CF_DOUBLE_BUFFER};
static int clamping[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLAMPING};
-static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_FILTER_TYPE};
+static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] =
+ W9968CF_FILTER_TYPE};
static int largeview[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_LARGEVIEW};
-static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_DECOMPRESSION};
+static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+ W9968CF_DECOMPRESSION};
static int upscaling[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_UPSCALING};
static unsigned short force_palette[] = {[0 ... W9968CF_MAX_DEVICES-1] = 0};
static int force_rgb[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_FORCE_RGB};
static int autobright[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOBRIGHT};
static int autoexp[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOEXP};
-static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_LIGHTFREQ};
+static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+ W9968CF_LIGHTFREQ};
static int bandingfilter[] = {[0 ... W9968CF_MAX_DEVICES-1]=
- W9968CF_BANDINGFILTER};
+ W9968CF_BANDINGFILTER};
static short clockdiv[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLOCKDIV};
static int backlight[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_BACKLIGHT};
static int mirror[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_MIRROR};
static int monochrome[] = {[0 ... W9968CF_MAX_DEVICES-1]=W9968CF_MONOCHROME};
-static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_BRIGHTNESS};
+static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+ W9968CF_BRIGHTNESS};
static unsigned int hue[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_HUE};
static unsigned int colour[]={[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_COLOUR};
-static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_CONTRAST};
-static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
- W9968CF_WHITENESS};
+static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+ W9968CF_CONTRAST};
+static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
+ W9968CF_WHITENESS};
#ifdef W9968CF_DEBUG
static unsigned short debug = W9968CF_DEBUG_LEVEL;
static int specific_debug = W9968CF_SPECIFIC_DEBUG;
@@ -145,251 +145,251 @@
#endif
#ifdef CONFIG_KMOD
-MODULE_PARM_DESC(ovmod_load,
- "\n<0|1> Automatic 'ovcamchip' module loading."
- "\n0 disabled, 1 enabled."
- "\nIf enabled,'insmod' searches for the required 'ovcamchip'"
- "\nmodule in the system, according to its configuration, and"
- "\nattempts to load that module automatically. This action is"
- "\nperformed once as soon as the 'w9968cf' module is loaded"
- "\ninto memory."
- "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
- "\n");
+MODULE_PARM_DESC(ovmod_load,
+ "\n<0|1> Automatic 'ovcamchip' module loading."
+ "\n0 disabled, 1 enabled."
+ "\nIf enabled,'insmod' searches for the required 'ovcamchip'"
+ "\nmodule in the system, according to its configuration, and"
+ "\nattempts to load that module automatically. This action is"
+ "\nperformed once as soon as the 'w9968cf' module is loaded"
+ "\ninto memory."
+ "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
+ "\n");
#endif
-MODULE_PARM_DESC(simcams,
- "\n<n> Number of cameras allowed to stream simultaneously."
- "\nn may vary from 0 to "
- __MODULE_STRING(W9968CF_MAX_DEVICES)"."
- "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"."
- "\n");
+MODULE_PARM_DESC(simcams,
+ "\n<n> Number of cameras allowed to stream simultaneously."
+ "\nn may vary from 0 to "
+ __MODULE_STRING(W9968CF_MAX_DEVICES)"."
+ "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"."
+ "\n");
MODULE_PARM_DESC(video_nr,
- "\n<-1|n[,...]> Specify V4L minor mode number."
- "\n -1 = use next available (default)"
- "\n n = use minor number n (integer >= 0)"
- "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES)
- " cameras this way."
- "\nFor example:"
- "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
- "\nthe second camera and use auto for the first"
- "\none and for every other camera."
- "\n");
+ "\n<-1|n[,...]> Specify V4L minor mode number."
+ "\n -1 = use next available (default)"
+ "\n n = use minor number n (integer >= 0)"
+ "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES)
+ " cameras this way."
+ "\nFor example:"
+ "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+ "\nthe second camera and use auto for the first"
+ "\none and for every other camera."
+ "\n");
MODULE_PARM_DESC(packet_size,
- "\n<n[,...]> Specify the maximum data payload"
- "\nsize in bytes for alternate settings, for each device."
- "\nn is scaled between 63 and 1023 "
- "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")."
- "\n");
+ "\n<n[,...]> Specify the maximum data payload"
+ "\nsize in bytes for alternate settings, for each device."
+ "\nn is scaled between 63 and 1023 "
+ "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")."
+ "\n");
MODULE_PARM_DESC(max_buffers,
- "\n<n[,...]> For advanced users."
- "\nSpecify the maximum number of video frame buffers"
- "\nto allocate for each device, from 2 to "
- __MODULE_STRING(W9968CF_MAX_BUFFERS)
- ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")."
- "\n");
-MODULE_PARM_DESC(double_buffer,
- "\n<0|1[,...]> "
- "Hardware double buffering: 0 disabled, 1 enabled."
- "\nIt should be enabled if you want smooth video output: if"
- "\nyou obtain out of sync. video, disable it, or try to"
- "\ndecrease the 'clockdiv' module parameter value."
- "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER)
- " for every device."
- "\n");
-MODULE_PARM_DESC(clamping,
- "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled."
- "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING)
- " for every device."
- "\n");
-MODULE_PARM_DESC(filter_type,
- "\n<0|1|2[,...]> Video filter type."
- "\n0 none, 1 (1-2-1) 3-tap filter, "
- "2 (2-3-6-3-2) 5-tap filter."
- "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE)
- " for every device."
- "\nThe filter is used to reduce noise and aliasing artifacts"
- "\nproduced by the CCD or CMOS image sensor, and the scaling"
- " process."
- "\n");
-MODULE_PARM_DESC(largeview,
- "\n<0|1[,...]> Large view: 0 disabled, 1 enabled."
- "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW)
- " for every device."
- "\n");
-MODULE_PARM_DESC(upscaling,
- "\n<0|1[,...]> Software scaling (for non-compressed video):"
- "\n0 disabled, 1 enabled."
- "\nDisable it if you have a slow CPU or you don't have"
- " enough memory."
- "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING)
- " for every device."
- "\nIf 'w9968cf-vpp' is not present, this parameter is"
- " set to 0."
- "\n");
+ "\n<n[,...]> For advanced users."
+ "\nSpecify the maximum number of video frame buffers"
+ "\nto allocate for each device, from 2 to "
+ __MODULE_STRING(W9968CF_MAX_BUFFERS)
+ ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")."
+ "\n");
+MODULE_PARM_DESC(double_buffer,
+ "\n<0|1[,...]> "
+ "Hardware double buffering: 0 disabled, 1 enabled."
+ "\nIt should be enabled if you want smooth video output: if"
+ "\nyou obtain out of sync. video, disable it, or try to"
+ "\ndecrease the 'clockdiv' module parameter value."
+ "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER)
+ " for every device."
+ "\n");
+MODULE_PARM_DESC(clamping,
+ "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled."
+ "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING)
+ " for every device."
+ "\n");
+MODULE_PARM_DESC(filter_type,
+ "\n<0|1|2[,...]> Video filter type."
+ "\n0 none, 1 (1-2-1) 3-tap filter, "
+ "2 (2-3-6-3-2) 5-tap filter."
+ "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE)
+ " for every device."
+ "\nThe filter is used to reduce noise and aliasing artifacts"
+ "\nproduced by the CCD or CMOS image sensor, and the scaling"
+ " process."
+ "\n");
+MODULE_PARM_DESC(largeview,
+ "\n<0|1[,...]> Large view: 0 disabled, 1 enabled."
+ "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW)
+ " for every device."
+ "\n");
+MODULE_PARM_DESC(upscaling,
+ "\n<0|1[,...]> Software scaling (for non-compressed video):"
+ "\n0 disabled, 1 enabled."
+ "\nDisable it if you have a slow CPU or you don't have"
+ " enough memory."
+ "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING)
+ " for every device."
+ "\nIf 'w9968cf-vpp' is not present, this parameter is"
+ " set to 0."
+ "\n");
MODULE_PARM_DESC(decompression,
- "\n<0|1|2[,...]> Software video decompression:"
- "\n- 0 disables decompression (doesn't allow formats needing"
- " decompression)"
- "\n- 1 forces decompression (allows formats needing"
- " decompression only);"
- "\n- 2 allows any permitted formats."
- "\nFormats supporting compressed video are YUV422P and"
- " YUV420P/YUV420 "
- "\nin any resolutions where both width and height are "
- "a multiple of 16."
- "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION)
- " for every device."
- "\nIf 'w9968cf-vpp' is not present, forcing decompression is "
- "\nnot allowed; in this case this parameter is set to 2."
- "\n");
+ "\n<0|1|2[,...]> Software video decompression:"
+ "\n- 0 disables decompression (doesn't allow formats needing"
+ " decompression)"
+ "\n- 1 forces decompression (allows formats needing"
+ " decompression only);"
+ "\n- 2 allows any permitted formats."
+ "\nFormats supporting compressed video are YUV422P and"
+ " YUV420P/YUV420 "
+ "\nin any resolutions where both width and height are "
+ "a multiple of 16."
+ "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION)
+ " for every device."
+ "\nIf 'w9968cf-vpp' is not present, forcing decompression is "
+ "\nnot allowed; in this case this parameter is set to 2."
+ "\n");
MODULE_PARM_DESC(force_palette,
- "\n<0"
- "|" __MODULE_STRING(VIDEO_PALETTE_UYVY)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUV420)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUYV)
- "|" __MODULE_STRING(VIDEO_PALETTE_YUV422)
- "|" __MODULE_STRING(VIDEO_PALETTE_GREY)
- "|" __MODULE_STRING(VIDEO_PALETTE_RGB555)
- "|" __MODULE_STRING(VIDEO_PALETTE_RGB565)
- "|" __MODULE_STRING(VIDEO_PALETTE_RGB24)
- "|" __MODULE_STRING(VIDEO_PALETTE_RGB32)
- "[,...]>"
- " Force picture palette."
- "\nIn order:"
- "\n- 0 allows any of the following formats:"
- "\n- UYVY 16 bpp - Original video, compression disabled"
- "\n- YUV420 12 bpp - Original video, compression enabled"
- "\n- YUV422P 16 bpp - Original video, compression enabled"
- "\n- YUV420P 12 bpp - Original video, compression enabled"
- "\n- YUVY 16 bpp - Software conversion from UYVY"
- "\n- YUV422 16 bpp - Software conversion from UYVY"
- "\n- GREY 8 bpp - Software conversion from UYVY"
- "\n- RGB555 16 bpp - Software conversion from UYVY"
- "\n- RGB565 16 bpp - Software conversion from UYVY"
- "\n- RGB24 24 bpp - Software conversion from UYVY"
- "\n- RGB32 32 bpp - Software conversion from UYVY"
- "\nWhen not 0, this parameter will override 'decompression'."
- "\nDefault value is 0 for every device."
- "\nInitial palette is "
- __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"."
- "\nIf 'w9968cf-vpp' is not present, this parameter is"
- " set to 9 (UYVY)."
- "\n");
-MODULE_PARM_DESC(force_rgb,
- "\n<0|1[,...]> Read RGB video data instead of BGR:"
- "\n 1 = use RGB component ordering."
- "\n 0 = use BGR component ordering."
- "\nThis parameter has effect when using RGBX palettes only."
- "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB)
- " for every device."
- "\n");
+ "\n<0"
+ "|" __MODULE_STRING(VIDEO_PALETTE_UYVY)
+ "|" __MODULE_STRING(VIDEO_PALETTE_YUV420)
+ "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P)
+ "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P)
+ "|" __MODULE_STRING(VIDEO_PALETTE_YUYV)
+ "|" __MODULE_STRING(VIDEO_PALETTE_YUV422)
+ "|" __MODULE_STRING(VIDEO_PALETTE_GREY)
+ "|" __MODULE_STRING(VIDEO_PALETTE_RGB555)
+ "|" __MODULE_STRING(VIDEO_PALETTE_RGB565)
+ "|" __MODULE_STRING(VIDEO_PALETTE_RGB24)
+ "|" __MODULE_STRING(VIDEO_PALETTE_RGB32)
+ "[,...]>"
+ " Force picture palette."
+ "\nIn order:"
+ "\n- 0 allows any of the following formats:"
+ "\n- UYVY 16 bpp - Original video, compression disabled"
+ "\n- YUV420 12 bpp - Original video, compression enabled"
+ "\n- YUV422P 16 bpp - Original video, compression enabled"
+ "\n- YUV420P 12 bpp - Original video, compression enabled"
+ "\n- YUVY 16 bpp - Software conversion from UYVY"
+ "\n- YUV422 16 bpp - Software conversion from UYVY"
+ "\n- GREY 8 bpp - Software conversion from UYVY"
+ "\n- RGB555 16 bpp - Software conversion from UYVY"
+ "\n- RGB565 16 bpp - Software conversion from UYVY"
+ "\n- RGB24 24 bpp - Software conversion from UYVY"
+ "\n- RGB32 32 bpp - Software conversion from UYVY"
+ "\nWhen not 0, this parameter will override 'decompression'."
+ "\nDefault value is 0 for every device."
+ "\nInitial palette is "
+ __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"."
+ "\nIf 'w9968cf-vpp' is not present, this parameter is"
+ " set to 9 (UYVY)."
+ "\n");
+MODULE_PARM_DESC(force_rgb,
+ "\n<0|1[,...]> Read RGB video data instead of BGR:"
+ "\n 1 = use RGB component ordering."
+ "\n 0 = use BGR component ordering."
+ "\nThis parameter has effect when using RGBX palettes only."
+ "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB)
+ " for every device."
+ "\n");
MODULE_PARM_DESC(autobright,
- "\n<0|1[,...]> Image sensor automatically changes brightness:"
- "\n 0 = no, 1 = yes"
- "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT)
- " for every device."
- "\n");
+ "\n<0|1[,...]> Image sensor automatically changes brightness:"
+ "\n 0 = no, 1 = yes"
+ "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT)
+ " for every device."
+ "\n");
MODULE_PARM_DESC(autoexp,
- "\n<0|1[,...]> Image sensor automatically changes exposure:"
- "\n 0 = no, 1 = yes"
- "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP)
- " for every device."
- "\n");
+ "\n<0|1[,...]> Image sensor automatically changes exposure:"
+ "\n 0 = no, 1 = yes"
+ "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP)
+ " for every device."
+ "\n");
MODULE_PARM_DESC(lightfreq,
- "\n<50|60[,...]> Light frequency in Hz:"
- "\n 50 for European and Asian lighting,"
- " 60 for American lighting."
- "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ)
- " for every device."
- "\n");
+ "\n<50|60[,...]> Light frequency in Hz:"
+ "\n 50 for European and Asian lighting,"
+ " 60 for American lighting."
+ "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ)
+ " for every device."
+ "\n");
MODULE_PARM_DESC(bandingfilter,
- "\n<0|1[,...]> Banding filter to reduce effects of"
- " fluorescent lighting:"
- "\n 0 disabled, 1 enabled."
- "\nThis filter tries to reduce the pattern of horizontal"
- "\nlight/dark bands caused by some (usually fluorescent)"
- " lighting."
- "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER)
- " for every device."
- "\n");
+ "\n<0|1[,...]> Banding filter to reduce effects of"
+ " fluorescent lighting:"
+ "\n 0 disabled, 1 enabled."
+ "\nThis filter tries to reduce the pattern of horizontal"
+ "\nlight/dark bands caused by some (usually fluorescent)"
+ " lighting."
+ "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER)
+ " for every device."
+ "\n");
MODULE_PARM_DESC(clockdiv,
- "\n<-1|n[,...]> "
- "Force pixel clock divisor to a specific value (for experts):"
- "\n n may vary from 0 to 127."
- "\n -1 for automatic value."
- "\nSee also the 'double_buffer' module parameter."
- "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV)
- " for every device."
- "\n");
+ "\n<-1|n[,...]> "
+ "Force pixel clock divisor to a specific value (for experts):"
+ "\n n may vary from 0 to 127."
+ "\n -1 for automatic value."
+ "\nSee also the 'double_buffer' module parameter."
+ "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV)
+ " for every device."
+ "\n");
MODULE_PARM_DESC(backlight,
- "\n<0|1[,...]> Objects are lit from behind:"
- "\n 0 = no, 1 = yes"
- "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT)
- " for every device."
- "\n");
+ "\n<0|1[,...]> Objects are lit from behind:"
+ "\n 0 = no, 1 = yes"
+ "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT)
+ " for every device."
+ "\n");
MODULE_PARM_DESC(mirror,
- "\n<0|1[,...]> Reverse image horizontally:"
- "\n 0 = no, 1 = yes"
- "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR)
- " for every device."
- "\n");
+ "\n<0|1[,...]> Reverse image horizontally:"
+ "\n 0 = no, 1 = yes"
+ "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR)
+ " for every device."
+ "\n");
MODULE_PARM_DESC(monochrome,
- "\n<0|1[,...]> Use image sensor as monochrome sensor:"
- "\n 0 = no, 1 = yes"
- "\nNot all the sensors support monochrome color."
- "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME)
- " for every device."
- "\n");
-MODULE_PARM_DESC(brightness,
- "\n<n[,...]> Set picture brightness (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS)
- " for every device."
- "\nThis parameter has no effect if 'autobright' is enabled."
- "\n");
-MODULE_PARM_DESC(hue,
- "\n<n[,...]> Set picture hue (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_HUE)
- " for every device."
- "\n");
-MODULE_PARM_DESC(colour,
- "\n<n[,...]> Set picture saturation (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR)
- " for every device."
- "\n");
-MODULE_PARM_DESC(contrast,
- "\n<n[,...]> Set picture contrast (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST)
- " for every device."
- "\n");
-MODULE_PARM_DESC(whiteness,
- "\n<n[,...]> Set picture whiteness (0-65535)."
- "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS)
- " for every device."
- "\n");
+ "\n<0|1[,...]> Use image sensor as monochrome sensor:"
+ "\n 0 = no, 1 = yes"
+ "\nNot all the sensors support monochrome color."
+ "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME)
+ " for every device."
+ "\n");
+MODULE_PARM_DESC(brightness,
+ "\n<n[,...]> Set picture brightness (0-65535)."
+ "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS)
+ " for every device."
+ "\nThis parameter has no effect if 'autobright' is enabled."
+ "\n");
+MODULE_PARM_DESC(hue,
+ "\n<n[,...]> Set picture hue (0-65535)."
+ "\nDefault value is "__MODULE_STRING(W9968CF_HUE)
+ " for every device."
+ "\n");
+MODULE_PARM_DESC(colour,
+ "\n<n[,...]> Set picture saturation (0-65535)."
+ "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR)
+ " for every device."
+ "\n");
+MODULE_PARM_DESC(contrast,
+ "\n<n[,...]> Set picture contrast (0-65535)."
+ "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST)
+ " for every device."
+ "\n");
+MODULE_PARM_DESC(whiteness,
+ "\n<n[,...]> Set picture whiteness (0-65535)."
+ "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS)
+ " for every device."
+ "\n");
#ifdef W9968CF_DEBUG
MODULE_PARM_DESC(debug,
- "\n<n> Debugging information level, from 0 to 6:"
- "\n0 = none (use carefully)"
- "\n1 = critical errors"
- "\n2 = significant informations"
- "\n3 = configuration or general messages"
- "\n4 = warnings"
- "\n5 = called functions"
- "\n6 = function internals"
- "\nLevel 5 and 6 are useful for testing only, when only "
- "one device is used."
- "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"."
- "\n");
+ "\n<n> Debugging information level, from 0 to 6:"
+ "\n0 = none (use carefully)"
+ "\n1 = critical errors"
+ "\n2 = significant informations"
+ "\n3 = configuration or general messages"
+ "\n4 = warnings"
+ "\n5 = called functions"
+ "\n6 = function internals"
+ "\nLevel 5 and 6 are useful for testing only, when only "
+ "one device is used."
+ "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"."
+ "\n");
MODULE_PARM_DESC(specific_debug,
- "\n<0|1> Enable or disable specific debugging messages:"
- "\n0 = print messages concerning every level"
- " <= 'debug' level."
- "\n1 = print messages concerning the level"
- " indicated by 'debug'."
- "\nDefault value is "
- __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"."
- "\n");
+ "\n<0|1> Enable or disable specific debugging messages:"
+ "\n0 = print messages concerning every level"
+ " <= 'debug' level."
+ "\n1 = print messages concerning the level"
+ " indicated by 'debug'."
+ "\nDefault value is "
+ __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"."
+ "\n");
#endif /* W9968CF_DEBUG */
@@ -406,7 +406,7 @@
static int w9968cf_ioctl(struct inode*, struct file*, unsigned, unsigned long);
static ssize_t w9968cf_read(struct file*, char __user *, size_t, loff_t*);
static int w9968cf_v4l_ioctl(struct inode*, struct file*, unsigned int,
- void __user *);
+ void __user *);
/* USB-specific */
static int w9968cf_start_transfer(struct w9968cf_device*);
@@ -428,25 +428,25 @@
static int w9968cf_smbus_read_ack(struct w9968cf_device*);
static int w9968cf_smbus_refresh_bus(struct w9968cf_device*);
static int w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
- u16 address, u8* value);
-static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address,
- u8 subaddress, u8* value);
+ u16 address, u8* value);
+static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address,
+ u8 subaddress, u8* value);
static int w9968cf_i2c_adap_write_byte(struct w9968cf_device*,
- u16 address, u8 subaddress);
+ u16 address, u8 subaddress);
static int w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device*,
- u16 address, u8 subaddress,
- u8 value);
+ u16 address, u8 subaddress,
+ u8 value);
/* I2C interface to kernel */
static int w9968cf_i2c_init(struct w9968cf_device*);
-static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data*);
+static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data*);
static u32 w9968cf_i2c_func(struct i2c_adapter*);
static int w9968cf_i2c_attach_inform(struct i2c_client*);
static int w9968cf_i2c_detach_inform(struct i2c_client*);
static int w9968cf_i2c_control(struct i2c_adapter*, unsigned int cmd,
- unsigned long arg);
+ unsigned long arg);
/* Memory management */
static void* rvmalloc(unsigned long size);
@@ -458,17 +458,17 @@
static int w9968cf_sensor_set_control(struct w9968cf_device*,int cid,int val);
static int w9968cf_sensor_get_control(struct w9968cf_device*,int cid,int *val);
static int w9968cf_sensor_cmd(struct w9968cf_device*,
- unsigned int cmd, void *arg);
+ unsigned int cmd, void *arg);
static int w9968cf_sensor_init(struct w9968cf_device*);
static int w9968cf_sensor_update_settings(struct w9968cf_device*);
static int w9968cf_sensor_get_picture(struct w9968cf_device*);
-static int w9968cf_sensor_update_picture(struct w9968cf_device*,
- struct video_picture pict);
+static int w9968cf_sensor_update_picture(struct w9968cf_device*,
+ struct video_picture pict);
/* Other helper functions */
static void w9968cf_configure_camera(struct w9968cf_device*,struct usb_device*,
- enum w9968cf_model_id,
- const unsigned short dev_nr);
+ enum w9968cf_model_id,
+ const unsigned short dev_nr);
static void w9968cf_adjust_configuration(struct w9968cf_device*);
static int w9968cf_turn_on_led(struct w9968cf_device*);
static int w9968cf_init_chip(struct w9968cf_device*);
@@ -477,8 +477,8 @@
static inline u8 w9968cf_need_decompression(u16 palette);
static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture);
static int w9968cf_set_window(struct w9968cf_device*, struct video_window);
-static int w9968cf_postprocess_frame(struct w9968cf_device*,
- struct w9968cf_frame_t*);
+static int w9968cf_postprocess_frame(struct w9968cf_device*,
+ struct w9968cf_frame_t*);
static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h);
static void w9968cf_init_framelist(struct w9968cf_device*);
static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num);
@@ -497,11 +497,11 @@
const char *name;
};
-/*--------------------------------------------------------------------------
+/*--------------------------------------------------------------------------
Returns the name of the matching element in the symbolic_list array. The
end of the list must be marked with an element that has a NULL name.
--------------------------------------------------------------------------*/
-static inline const char *
+static inline const char *
symbolic(struct w9968cf_symbolic_list list[], const int num)
{
int i;
@@ -568,7 +568,7 @@
static struct w9968cf_symbolic_list decoder_errlist[] = {
{ W9968CF_DEC_ERR_CORRUPTED_DATA, "Corrupted data" },
{ W9968CF_DEC_ERR_BUF_OVERFLOW, "Buffer overflow" },
- { W9968CF_DEC_ERR_NO_SOI, "SOI marker not found" },
+ { W9968CF_DEC_ERR_NO_SOI, "SOI marker not found" },
{ W9968CF_DEC_ERR_NO_SOF0, "SOF0 marker not found" },
{ W9968CF_DEC_ERR_NO_SOS, "SOS marker not found" },
{ W9968CF_DEC_ERR_NO_EOI, "EOI marker not found" },
@@ -695,7 +695,7 @@
bpp = (w9968cf_vpp) ? 4 : 2;
if (cam->upscaling)
vpp_bufsize = max(W9968CF_MAX_WIDTH*W9968CF_MAX_HEIGHT*bpp,
- cam->maxwidth*cam->maxheight*bpp);
+ cam->maxwidth*cam->maxheight*bpp);
else
vpp_bufsize = cam->maxwidth*cam->maxheight*bpp;
@@ -704,7 +704,7 @@
if (!(cam->transfer_buffer[i] =
kzalloc(W9968CF_ISO_PACKETS*p_size, GFP_KERNEL))) {
DBG(1, "Couldn't allocate memory for the isochronous "
- "transfer buffers (%u bytes)",
+ "transfer buffers (%u bytes)",
p_size * W9968CF_ISO_PACKETS)
return -ENOMEM;
}
@@ -780,7 +780,7 @@
of the next video frame; if an error is encountered in a packet, the entire
video frame is discarded and grabbed again.
If there are no requested frames in the FIFO list, packets are collected into
- a temporary buffer.
+ a temporary buffer.
--------------------------------------------------------------------------*/
static void w9968cf_urb_complete(struct urb *urb, struct pt_regs *regs)
{
@@ -799,7 +799,7 @@
/* "(*f)" will be used instead of "cam->frame_current" */
f = &cam->frame_current;
- /* If a frame has been requested and we are grabbing into
+ /* If a frame has been requested and we are grabbing into
the temporary frame, we'll switch to that requested frame */
if ((*f) == &cam->frame_tmp && *cam->requested_frame) {
if (cam->frame_tmp.status == F_GRABBING) {
@@ -808,7 +808,7 @@
(*f)->length = cam->frame_tmp.length;
memcpy((*f)->buffer, cam->frame_tmp.buffer,
(*f)->length);
- DBG(6, "Switched from temp. frame to frame #%d",
+ DBG(6, "Switched from temp. frame to frame #%d",
(*f)->number)
}
}
@@ -850,7 +850,7 @@
if (cam->vpp_flag & VPP_DECOMPRESSION) {
err = w9968cf_vpp->check_headers((*f)->buffer,
- (*f)->length);
+ (*f)->length);
if (err) {
DBG(4, "Skip corrupted frame: %s",
symbolic(decoder_errlist, err))
@@ -975,7 +975,7 @@
cam->frame_current = &cam->frame_tmp;
if (!(cam->vpp_flag & VPP_DECOMPRESSION))
- DBG(5, "Isochronous transfer size: %lu bytes/frame",
+ DBG(5, "Isochronous transfer size: %lu bytes/frame",
(unsigned long)t_size*2)
DBG(5, "Starting the isochronous transfer...")
@@ -992,7 +992,7 @@
usb_free_urb(cam->urb[j]);
}
DBG(1, "Couldn't send a transfer request to the "
- "USB core (error #%d, %s)", err,
+ "USB core (error #%d, %s)", err,
symbolic(urb_errlist, err))
return err;
}
@@ -1016,7 +1016,7 @@
if (!cam->streaming)
return 0;
- /* This avoids race conditions with usb_submit_urb()
+ /* This avoids race conditions with usb_submit_urb()
in the URB completition handler */
spin_lock_irqsave(&cam->urb_lock, lock_flags);
cam->streaming = 0;
@@ -1050,7 +1050,7 @@
/*--------------------------------------------------------------------------
- Write a W9968CF register.
+ Write a W9968CF register.
Return 0 on success, -1 otherwise.
--------------------------------------------------------------------------*/
static int w9968cf_write_reg(struct w9968cf_device* cam, u16 value, u16 index)
@@ -1059,8 +1059,8 @@
int res;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
- USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
- value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT);
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT);
if (res < 0)
DBG(4, "Failed to write a register "
@@ -1072,7 +1072,7 @@
/*--------------------------------------------------------------------------
- Read a W9968CF register.
+ Read a W9968CF register.
Return the register value on success, -1 otherwise.
--------------------------------------------------------------------------*/
static int w9968cf_read_reg(struct w9968cf_device* cam, u16 index)
@@ -1082,8 +1082,8 @@
int res;
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 1,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT);
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT);
if (res < 0)
DBG(4, "Failed to read a register "
@@ -1107,8 +1107,8 @@
value = *data++;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
- USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
- value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT);
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT);
if (res < 0)
DBG(4, "Failed to write the FSB registers "
@@ -1287,9 +1287,9 @@
/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
-static int
-w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam,
- u16 address, u8 subaddress,u8 value)
+static int
+w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam,
+ u16 address, u8 subaddress,u8 value)
{
u16* data = cam->data_buffer;
int err = 0;
@@ -1348,7 +1348,7 @@
"value 0x%02X", address, subaddress, value)
else
DBG(5, "I2C write byte data failed, addr.0x%04X, "
- "subaddr.0x%02X, value 0x%02X",
+ "subaddr.0x%02X, value 0x%02X",
address, subaddress, value)
return err;
@@ -1356,10 +1356,10 @@
/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
-static int
-w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam,
- u16 address, u8 subaddress,
- u8* value)
+static int
+w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam,
+ u16 address, u8 subaddress,
+ u8* value)
{
int err = 0;
@@ -1384,7 +1384,7 @@
if (!err)
DBG(5, "I2C read byte data done, addr.0x%04X, "
- "subaddr.0x%02X, value 0x%02X",
+ "subaddr.0x%02X, value 0x%02X",
address, subaddress, *value)
else
DBG(5, "I2C read byte data failed, addr.0x%04X, "
@@ -1396,9 +1396,9 @@
/* SMBus protocol: S Addr+1 Rd [A] [Value] NA P */
-static int
+static int
w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
- u16 address, u8* value)
+ u16 address, u8* value)
{
int err = 0;
@@ -1411,7 +1411,7 @@
err += w9968cf_smbus_read_byte(cam, value);
err += w9968cf_smbus_write_ack(cam);
err += w9968cf_smbus_stop(cam);
-
+
/* Serial data disable */
err += w9968cf_write_sb(cam, 0x0000);
@@ -1427,9 +1427,9 @@
/* SMBus protocol: S Addr Wr [A] Value [A] P */
-static int
+static int
w9968cf_i2c_adap_write_byte(struct w9968cf_device* cam,
- u16 address, u8 value)
+ u16 address, u8 value)
{
DBG(4, "i2c_write_byte() is an unsupported transfer mode")
return -EINVAL;
@@ -1442,13 +1442,13 @@
****************************************************************************/
static int
-w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
- unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data *data)
+w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
{
struct w9968cf_device* cam = i2c_get_adapdata(adapter);
u8 i;
- int err = 0;
+ int err = 0;
switch (addr) {
case OV6xx0_SID:
@@ -1464,20 +1464,20 @@
addr <<= 1;
if (read_write == I2C_SMBUS_WRITE)
- err = w9968cf_i2c_adap_write_byte(cam, addr, command);
- else if (read_write == I2C_SMBUS_READ)
+ err = w9968cf_i2c_adap_write_byte(cam, addr, command);
+ else if (read_write == I2C_SMBUS_READ)
err = w9968cf_i2c_adap_read_byte(cam,addr,&data->byte);
} else if (size == I2C_SMBUS_BYTE_DATA) {
addr <<= 1;
if (read_write == I2C_SMBUS_WRITE)
- err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr,
- command, data->byte);
+ err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr,
+ command, data->byte);
else if (read_write == I2C_SMBUS_READ) {
for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) {
err = w9968cf_i2c_adap_read_byte_data(cam,addr,
- command, &data->byte);
+ command, &data->byte);
if (err) {
if (w9968cf_smbus_refresh_bus(cam)) {
err = -EIO;
@@ -1520,7 +1520,7 @@
return err;
}
} else {
- DBG(4, "Rejected client [%s] with driver [%s]",
+ DBG(4, "Rejected client [%s] with driver [%s]",
client->name, client->driver->driver.name)
return -EINVAL;
}
@@ -1545,9 +1545,9 @@
}
-static int
+static int
w9968cf_i2c_control(struct i2c_adapter* adapter, unsigned int cmd,
- unsigned long arg)
+ unsigned long arg)
{
return 0;
}
@@ -1625,12 +1625,12 @@
static int w9968cf_init_chip(struct w9968cf_device* cam)
{
unsigned long hw_bufsize = cam->maxwidth*cam->maxheight*2,
- y0 = 0x0000,
- u0 = y0 + hw_bufsize/2,
- v0 = u0 + hw_bufsize/4,
- y1 = v0 + hw_bufsize/4,
- u1 = y1 + hw_bufsize/2,
- v1 = u1 + hw_bufsize/4;
+ y0 = 0x0000,
+ u0 = y0 + hw_bufsize/2,
+ v0 = u0 + hw_bufsize/4,
+ y1 = v0 + hw_bufsize/4,
+ u1 = y1 + hw_bufsize/2,
+ v1 = u1 + hw_bufsize/4;
int err = 0;
err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power off */
@@ -1762,7 +1762,7 @@
cam->vpp_flag = VPP_SWAP_YUV_BYTES;
hw_palette = VIDEO_PALETTE_UYVY;
break;
- /* Original video is used instead of RGBX palettes.
+ /* Original video is used instead of RGBX palettes.
Software conversion later. */
case VIDEO_PALETTE_GREY:
case VIDEO_PALETTE_RGB555:
@@ -1777,7 +1777,7 @@
}
/* NOTE: due to memory issues, it is better to disable the hardware
- double buffering during compression */
+ double buffering during compression */
if (cam->double_buffer && !(cam->vpp_flag & VPP_DECOMPRESSION))
reg_v |= 0x0080;
@@ -1832,8 +1832,8 @@
#define __UNSC(x) ((x) >> 10)
/* Make sure we are using a supported resolution */
- if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
- (u16*)&win.height)))
+ if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
+ (u16*)&win.height)))
goto error;
/* Scaling factors */
@@ -1962,7 +1962,7 @@
/* Settings changed, so we clear the frame buffers */
memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
- DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)",
+ DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)",
win.width, win.height, win.x, win.y)
PDBGG("x=%u ,y=%u, w=%u, h=%u, ax=%u, ay=%u, s_win.x=%u, s_win.y=%u, "
@@ -1978,11 +1978,11 @@
}
-/*--------------------------------------------------------------------------
+/*--------------------------------------------------------------------------
Adjust the asked values for window width and height.
Return 0 on success, -1 otherwise.
--------------------------------------------------------------------------*/
-static int
+static int
w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height)
{
u16 maxw, maxh;
@@ -1992,10 +1992,10 @@
maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
- : cam->maxwidth;
+ : cam->maxwidth;
maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
- : cam->maxheight;
+ : cam->maxheight;
if (*width > maxw)
*width = maxw;
@@ -2054,7 +2054,7 @@
Read, store and remove the first pointer in the FIFO list of requested
frames. This function is called in interrupt context.
--------------------------------------------------------------------------*/
-static void
+static void
w9968cf_pop_frame(struct w9968cf_device* cam, struct w9968cf_frame_t** framep)
{
u8 i;
@@ -2078,9 +2078,9 @@
High-level video post-processing routine on grabbed frames.
Return 0 on success, a negative number otherwise.
--------------------------------------------------------------------------*/
-static int
-w9968cf_postprocess_frame(struct w9968cf_device* cam,
- struct w9968cf_frame_t* fr)
+static int
+w9968cf_postprocess_frame(struct w9968cf_device* cam,
+ struct w9968cf_frame_t* fr)
{
void *pIn = fr->buffer, *pOut = cam->frame_vpp.buffer, *tmp;
u16 w = cam->window.width,
@@ -2127,7 +2127,7 @@
w9968cf_vpp->uyvy_to_rgbx(pIn, fr->length, pOut, fmt, rgb);
fr->length = (w*h*d)/8;
_PSWAP(pIn, pOut)
- DBG(6, "UYVY-16bit to %s conversion done",
+ DBG(6, "UYVY-16bit to %s conversion done",
symbolic(v4l1_plist, fmt))
}
@@ -2143,7 +2143,7 @@
* Image sensor control routines *
****************************************************************************/
-static int
+static int
w9968cf_sensor_set_control(struct w9968cf_device* cam, int cid, int val)
{
struct ovcamchip_control ctl;
@@ -2158,7 +2158,7 @@
}
-static int
+static int
w9968cf_sensor_get_control(struct w9968cf_device* cam, int cid, int* val)
{
struct ovcamchip_control ctl;
@@ -2198,38 +2198,38 @@
int err = 0;
/* Auto brightness */
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT,
- cam->auto_brt);
+ err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT,
+ cam->auto_brt);
if (err)
return err;
/* Auto exposure */
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP,
- cam->auto_exp);
+ err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP,
+ cam->auto_exp);
if (err)
return err;
/* Banding filter */
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT,
- cam->bandfilt);
+ err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT,
+ cam->bandfilt);
if (err)
return err;
/* Light frequency */
err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_FREQ,
- cam->lightfreq);
+ cam->lightfreq);
if (err)
return err;
/* Back light */
err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BACKLIGHT,
- cam->backlight);
+ cam->backlight);
if (err)
return err;
/* Mirror */
err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_MIRROR,
- cam->mirror);
+ cam->mirror);
if (err)
return err;
@@ -2281,15 +2281,15 @@
Returns: 0 on success, a negative number otherwise.
--------------------------------------------------------------------------*/
static int
-w9968cf_sensor_update_picture(struct w9968cf_device* cam,
- struct video_picture pict)
+w9968cf_sensor_update_picture(struct w9968cf_device* cam,
+ struct video_picture pict)
{
int err = 0;
if ((!cam->sensor_initialized)
|| pict.contrast != cam->picture.contrast) {
err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_CONT,
- pict.contrast);
+ pict.contrast);
if (err)
goto fail;
DBG(4, "Contrast changed from %u to %u",
@@ -2297,10 +2297,10 @@
cam->picture.contrast = pict.contrast;
}
- if (((!cam->sensor_initialized) ||
+ if (((!cam->sensor_initialized) ||
pict.brightness != cam->picture.brightness) && (!cam->auto_brt)) {
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT,
- pict.brightness);
+ err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT,
+ pict.brightness);
if (err)
goto fail;
DBG(4, "Brightness changed from %u to %u",
@@ -2309,8 +2309,8 @@
}
if ((!cam->sensor_initialized) || pict.colour != cam->picture.colour) {
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT,
- pict.colour);
+ err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT,
+ pict.colour);
if (err)
goto fail;
DBG(4, "Colour changed from %u to %u",
@@ -2319,8 +2319,8 @@
}
if ((!cam->sensor_initialized) || pict.hue != cam->picture.hue) {
- err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE,
- pict.hue);
+ err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE,
+ pict.hue);
if (err)
goto fail;
DBG(4, "Hue changed from %u to %u",
@@ -2349,12 +2349,12 @@
{
int err = 0;
- if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE,
- &cam->monochrome)))
+ if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE,
+ &cam->monochrome)))
goto error;
- if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE,
- &cam->sensor)))
+ if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE,
+ &cam->sensor)))
goto error;
/* NOTE: Make sure width and height are a multiple of 16 */
@@ -2416,14 +2416,14 @@
/*--------------------------------------------------------------------------
Fill some basic fields in the main device data structure.
- This function is called once on w9968cf_usb_probe() for each recognized
+ This function is called once on w9968cf_usb_probe() for each recognized
camera.
--------------------------------------------------------------------------*/
static void
w9968cf_configure_camera(struct w9968cf_device* cam,
- struct usb_device* udev,
- enum w9968cf_model_id mod_id,
- const unsigned short dev_nr)
+ struct usb_device* udev,
+ enum w9968cf_model_id mod_id,
+ const unsigned short dev_nr)
{
mutex_init(&cam->fileop_mutex);
init_waitqueue_head(&cam->open);
@@ -2444,60 +2444,60 @@
packet_size[dev_nr] < wMaxPacketSize[cam->altsetting-1];
cam->altsetting++);
- cam->max_buffers = (max_buffers[dev_nr] < 2 ||
- max_buffers[dev_nr] > W9968CF_MAX_BUFFERS)
- ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr];
+ cam->max_buffers = (max_buffers[dev_nr] < 2 ||
+ max_buffers[dev_nr] > W9968CF_MAX_BUFFERS)
+ ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr];
- cam->double_buffer = (double_buffer[dev_nr] == 0 ||
- double_buffer[dev_nr] == 1)
- ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER;
+ cam->double_buffer = (double_buffer[dev_nr] == 0 ||
+ double_buffer[dev_nr] == 1)
+ ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER;
cam->clamping = (clamping[dev_nr] == 0 || clamping[dev_nr] == 1)
- ? (u8)clamping[dev_nr] : W9968CF_CLAMPING;
-
+ ? (u8)clamping[dev_nr] : W9968CF_CLAMPING;
+
cam->filter_type = (filter_type[dev_nr] == 0 ||
- filter_type[dev_nr] == 1 ||
- filter_type[dev_nr] == 2)
- ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE;
+ filter_type[dev_nr] == 1 ||
+ filter_type[dev_nr] == 2)
+ ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE;
cam->capture = 1;
cam->largeview = (largeview[dev_nr] == 0 || largeview[dev_nr] == 1)
- ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW;
+ ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW;
- cam->decompression = (decompression[dev_nr] == 0 ||
- decompression[dev_nr] == 1 ||
- decompression[dev_nr] == 2)
- ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION;
+ cam->decompression = (decompression[dev_nr] == 0 ||
+ decompression[dev_nr] == 1 ||
+ decompression[dev_nr] == 2)
+ ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION;
- cam->upscaling = (upscaling[dev_nr] == 0 ||
- upscaling[dev_nr] == 1)
- ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING;
+ cam->upscaling = (upscaling[dev_nr] == 0 ||
+ upscaling[dev_nr] == 1)
+ ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING;
cam->auto_brt = (autobright[dev_nr] == 0 || autobright[dev_nr] == 1)
- ? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT;
+ ? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT;
cam->auto_exp = (autoexp[dev_nr] == 0 || autoexp[dev_nr] == 1)
- ? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP;
+ ? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP;
cam->lightfreq = (lightfreq[dev_nr] == 50 || lightfreq[dev_nr] == 60)
- ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ;
+ ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ;
- cam->bandfilt = (bandingfilter[dev_nr] == 0 ||
- bandingfilter[dev_nr] == 1)
- ? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER;
+ cam->bandfilt = (bandingfilter[dev_nr] == 0 ||
+ bandingfilter[dev_nr] == 1)
+ ? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER;
cam->backlight = (backlight[dev_nr] == 0 || backlight[dev_nr] == 1)
- ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT;
+ ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT;
cam->clockdiv = (clockdiv[dev_nr] == -1 || clockdiv[dev_nr] >= 0)
- ? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV;
+ ? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV;
cam->mirror = (mirror[dev_nr] == 0 || mirror[dev_nr] == 1)
- ? (u8)mirror[dev_nr] : W9968CF_MIRROR;
+ ? (u8)mirror[dev_nr] : W9968CF_MIRROR;
cam->monochrome = (monochrome[dev_nr] == 0 || monochrome[dev_nr] == 1)
- ? monochrome[dev_nr] : W9968CF_MONOCHROME;
+ ? monochrome[dev_nr] : W9968CF_MONOCHROME;
cam->picture.brightness = (u16)brightness[dev_nr];
cam->picture.hue = (u16)hue[dev_nr];
@@ -2519,7 +2519,7 @@
cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
cam->force_rgb = (force_rgb[dev_nr] == 0 || force_rgb[dev_nr] == 1)
- ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB;
+ ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB;
cam->window.x = 0;
cam->window.y = 0;
@@ -2531,16 +2531,16 @@
DBG(3, "%s configured with settings #%u:",
symbolic(camlist, cam->id), dev_nr)
-
+
DBG(3, "- Data packet size for USB isochrnous transfer: %u bytes",
wMaxPacketSize[cam->altsetting-1])
-
+
DBG(3, "- Number of requested video frame buffers: %u",
cam->max_buffers)
if (cam->double_buffer)
DBG(3, "- Hardware double buffering enabled")
- else
+ else
DBG(3, "- Hardware double buffering disabled")
if (cam->filter_type == 0)
@@ -2648,7 +2648,7 @@
/*--------------------------------------------------------------------------
Release the resources used by the driver.
- This function is called on disconnect
+ This function is called on disconnect
(or on close if deallocation has been deferred)
--------------------------------------------------------------------------*/
static void w9968cf_release_resources(struct w9968cf_device* cam)
@@ -2706,8 +2706,8 @@
}
mutex_unlock(&cam->dev_mutex);
err = wait_event_interruptible_exclusive(cam->open,
- cam->disconnected ||
- !cam->users);
+ cam->disconnected ||
+ !cam->users);
if (err) {
up_read(&w9968cf_disconnect);
return err;
@@ -2820,9 +2820,9 @@
w9968cf_push_frame(cam, 1);
err = wait_event_interruptible(cam->wait_queue,
- cam->frame[0].status == F_READY ||
- cam->frame[1].status == F_READY ||
- cam->disconnected);
+ cam->frame[0].status == F_READY ||
+ cam->frame[1].status == F_READY ||
+ cam->disconnected);
if (err) {
mutex_unlock(&cam->fileop_mutex);
return err;
@@ -2859,12 +2859,12 @@
static int w9968cf_mmap(struct file* filp, struct vm_area_struct *vma)
{
struct w9968cf_device* cam = (struct w9968cf_device*)
- video_get_drvdata(video_devdata(filp));
+ video_get_drvdata(video_devdata(filp));
unsigned long vsize = vma->vm_end - vma->vm_start,
- psize = cam->nbuffers * cam->frame[0].size,
- start = vma->vm_start,
- pos = (unsigned long)cam->frame[0].buffer,
- page;
+ psize = cam->nbuffers * cam->frame[0].size,
+ start = vma->vm_start,
+ pos = (unsigned long)cam->frame[0].buffer,
+ page;
if (cam->disconnected) {
DBG(2, "Device not present")
@@ -2898,7 +2898,7 @@
static int
w9968cf_ioctl(struct inode* inode, struct file* filp,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg)
{
struct w9968cf_device* cam;
int err;
@@ -2928,21 +2928,21 @@
static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp,
- unsigned int cmd, void __user * arg)
+ unsigned int cmd, void __user * arg)
{
struct w9968cf_device* cam;
const char* v4l1_ioctls[] = {
- "?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER",
+ "?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER",
"GPICT", "SPICT", "CCAPTURE", "GWIN", "SWIN", "GFBUF",
"SFBUF", "KEY", "GFREQ", "SFREQ", "GAUDIO", "SAUDIO",
"SYNC", "MCAPTURE", "GMBUF", "GUNIT", "GCAPTURE", "SCAPTURE",
- "SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE",
- "GVBIFMT", "SVBIFMT"
+ "SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE",
+ "GVBIFMT", "SVBIFMT"
};
#define V4L1_IOCTL(cmd) \
- ((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \
- v4l1_ioctls[_IOC_NR((cmd))] : "?")
+ ((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \
+ v4l1_ioctls[_IOC_NR((cmd))] : "?")
cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
@@ -2957,14 +2957,14 @@
.minwidth = cam->minwidth,
.minheight = cam->minheight,
};
- sprintf(cap.name, "W996[87]CF USB Camera #%d",
- cam->v4ldev->minor);
+ sprintf(cap.name, "W996[87]CF USB Camera #%d",
+ cam->v4ldev->minor);
cap.maxwidth = (cam->upscaling && w9968cf_vpp)
- ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
- : cam->maxwidth;
+ ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
+ : cam->maxwidth;
cap.maxheight = (cam->upscaling && w9968cf_vpp)
- ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
- : cam->maxheight;
+ ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
+ : cam->maxheight;
if (copy_to_user(arg, &cap, sizeof(cap)))
return -EFAULT;
@@ -3029,7 +3029,7 @@
if (copy_from_user(&pict, arg, sizeof(pict)))
return -EFAULT;
- if ( (cam->force_palette || !w9968cf_vpp)
+ if ( (cam->force_palette || !w9968cf_vpp)
&& pict.palette != cam->picture.palette ) {
DBG(4, "Palette %s rejected: only %s is allowed",
symbolic(v4l1_plist, pict.palette),
@@ -3046,24 +3046,24 @@
if (!cam->force_palette) {
if (cam->decompression == 0) {
if (w9968cf_need_decompression(pict.palette)) {
- DBG(4, "Decompression disabled: palette %s is not "
- "allowed. VIDIOCSPICT failed",
- symbolic(v4l1_plist, pict.palette))
- return -EINVAL;
+ DBG(4, "Decompression disabled: palette %s is not "
+ "allowed. VIDIOCSPICT failed",
+ symbolic(v4l1_plist, pict.palette))
+ return -EINVAL;
}
} else if (cam->decompression == 1) {
if (!w9968cf_need_decompression(pict.palette)) {
- DBG(4, "Decompression forced: palette %s is not "
- "allowed. VIDIOCSPICT failed",
- symbolic(v4l1_plist, pict.palette))
- return -EINVAL;
+ DBG(4, "Decompression forced: palette %s is not "
+ "allowed. VIDIOCSPICT failed",
+ symbolic(v4l1_plist, pict.palette))
+ return -EINVAL;
}
}
}
if (pict.depth != w9968cf_valid_depth(pict.palette)) {
DBG(4, "Requested depth %u bpp is not valid for %s "
- "palette: ignored and changed to %u bpp",
+ "palette: ignored and changed to %u bpp",
pict.depth, symbolic(v4l1_plist, pict.palette),
w9968cf_valid_depth(pict.palette))
pict.depth = w9968cf_valid_depth(pict.palette);
@@ -3074,9 +3074,9 @@
|| cam->frame_current->queued) {
err = wait_event_interruptible
( cam->wait_queue,
- cam->disconnected ||
- (!*cam->requested_frame &&
- !cam->frame_current->queued) );
+ cam->disconnected ||
+ (!*cam->requested_frame &&
+ !cam->frame_current->queued) );
if (err)
return err;
if (cam->disconnected)
@@ -3116,7 +3116,7 @@
return -EINVAL;
if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
- (u16*)&win.height))) {
+ (u16*)&win.height))) {
DBG(4, "Resolution not supported (%ux%u). "
"VIDIOCSWIN failed", win.width, win.height)
return err;
@@ -3130,9 +3130,9 @@
|| cam->frame_current->queued) {
err = wait_event_interruptible
( cam->wait_queue,
- cam->disconnected ||
- (!*cam->requested_frame &&
- !cam->frame_current->queued) );
+ cam->disconnected ||
+ (!*cam->requested_frame &&
+ !cam->frame_current->queued) );
if (err)
return err;
if (cam->disconnected)
@@ -3175,7 +3175,7 @@
mbuf.frames = cam->nbuffers;
for (i = 0; i < cam->nbuffers; i++)
mbuf.offsets[i] = (unsigned long)cam->frame[i].buffer -
- (unsigned long)cam->frame[0].buffer;
+ (unsigned long)cam->frame[0].buffer;
if (copy_to_user(arg, &mbuf, sizeof(mbuf)))
return -EFAULT;
@@ -3194,7 +3194,7 @@
return -EFAULT;
DBG(6, "VIDIOCMCAPTURE called: frame #%u, format=%s, %dx%d",
- mmap.frame, symbolic(v4l1_plist, mmap.format),
+ mmap.frame, symbolic(v4l1_plist, mmap.format),
mmap.width, mmap.height)
if (mmap.frame >= cam->nbuffers) {
@@ -3203,7 +3203,7 @@
return -EINVAL;
}
- if (mmap.format!=cam->picture.palette &&
+ if (mmap.format!=cam->picture.palette &&
(cam->force_palette || !w9968cf_vpp)) {
DBG(4, "Palette %s rejected: only %s is allowed",
symbolic(v4l1_plist, mmap.format),
@@ -3213,7 +3213,7 @@
if (!w9968cf_valid_palette(mmap.format)) {
DBG(4, "Palette %s not supported. "
- "VIDIOCMCAPTURE failed",
+ "VIDIOCMCAPTURE failed",
symbolic(v4l1_plist, mmap.format))
return -EINVAL;
}
@@ -3221,23 +3221,23 @@
if (!cam->force_palette) {
if (cam->decompression == 0) {
if (w9968cf_need_decompression(mmap.format)) {
- DBG(4, "Decompression disabled: palette %s is not "
- "allowed. VIDIOCSPICT failed",
- symbolic(v4l1_plist, mmap.format))
- return -EINVAL;
+ DBG(4, "Decompression disabled: palette %s is not "
+ "allowed. VIDIOCSPICT failed",
+ symbolic(v4l1_plist, mmap.format))
+ return -EINVAL;
}
} else if (cam->decompression == 1) {
if (!w9968cf_need_decompression(mmap.format)) {
- DBG(4, "Decompression forced: palette %s is not "
- "allowed. VIDIOCSPICT failed",
- symbolic(v4l1_plist, mmap.format))
- return -EINVAL;
+ DBG(4, "Decompression forced: palette %s is not "
+ "allowed. VIDIOCSPICT failed",
+ symbolic(v4l1_plist, mmap.format))
+ return -EINVAL;
}
}
}
- if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width,
- (u16*)&mmap.height))) {
+ if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width,
+ (u16*)&mmap.height))) {
DBG(4, "Resolution not supported (%dx%d). "
"VIDIOCMCAPTURE failed",
mmap.width, mmap.height)
@@ -3258,12 +3258,12 @@
DBG(6, "VIDIOCMCAPTURE. Change settings for "
"frame #%u: %dx%d, format %s. Wait...",
mmap.frame, mmap.width, mmap.height,
- symbolic(v4l1_plist, mmap.format))
+ symbolic(v4l1_plist, mmap.format))
err = wait_event_interruptible
( cam->wait_queue,
- cam->disconnected ||
- (!*cam->requested_frame &&
- !cam->frame_current->queued) );
+ cam->disconnected ||
+ (!*cam->requested_frame &&
+ !cam->frame_current->queued) );
if (err)
return err;
if (cam->disconnected)
@@ -3280,7 +3280,7 @@
goto ioctl_fail;
/* This before set_window */
- if (w9968cf_set_picture(cam, pict))
+ if (w9968cf_set_picture(cam, pict))
goto ioctl_fail;
if (w9968cf_set_window(cam, win))
@@ -3292,10 +3292,10 @@
} else if (fr->queued) {
DBG(6, "Wait until frame #%u is free", mmap.frame)
-
- err = wait_event_interruptible(cam->wait_queue,
- cam->disconnected ||
- (!fr->queued));
+
+ err = wait_event_interruptible(cam->wait_queue,
+ cam->disconnected ||
+ (!fr->queued));
if (err)
return err;
if (cam->disconnected)
@@ -3335,9 +3335,9 @@
}
case F_ERROR:
case F_GRABBING:
- err = wait_event_interruptible(cam->wait_queue,
- (fr->status == F_READY)
- || cam->disconnected);
+ err = wait_event_interruptible(cam->wait_queue,
+ (fr->status == F_READY)
+ || cam->disconnected);
if (err)
return err;
if (cam->disconnected)
@@ -3439,7 +3439,7 @@
DBG(4, "Unsupported V4L1 IOCtl: VIDIOC%s "
"(type 0x%01X, "
"n. 0x%01X, "
- "dir. 0x%01X, "
+ "dir. 0x%01X, "
"size 0x%02X)",
V4L1_IOCTL(cmd),
_IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
@@ -3499,13 +3499,13 @@
le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct)
mod_id = W9968CF_MOD_CLVBWGP; /* see camlist[] table */
else if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[1].idVendor &&
- le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct)
+ le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct)
mod_id = W9968CF_MOD_GENERIC; /* see camlist[] table */
else
return -ENODEV;
cam = (struct w9968cf_device*)
- kzalloc(sizeof(struct w9968cf_device), GFP_KERNEL);
+ kzalloc(sizeof(struct w9968cf_device), GFP_KERNEL);
if (!cam)
return -ENOMEM;
@@ -3569,7 +3569,7 @@
cam->v4ldev->dev = &cam->dev;
err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
- video_nr[dev_nr]);
+ video_nr[dev_nr]);
if (err) {
DBG(1, "V4L device registration failed")
if (err == -ENFILE && video_nr[dev_nr] == -1)
@@ -3611,7 +3611,7 @@
static void w9968cf_usb_disconnect(struct usb_interface* intf)
{
- struct w9968cf_device* cam =
+ struct w9968cf_device* cam =
(struct w9968cf_device*)usb_get_intfdata(intf);
down_write(&w9968cf_disconnect);
diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h
index a87be71..2836b45 100644
--- a/drivers/media/video/w9968cf.h
+++ b/drivers/media/video/w9968cf.h
@@ -61,7 +61,7 @@
/* Maximum data payload sizes in bytes for alternate settings */
static const u16 wMaxPacketSize[] = {1023, 959, 895, 831, 767, 703, 639, 575,
- 511, 447, 383, 319, 255, 191, 127, 63};
+ 511, 447, 383, 319, 255, 191, 127, 63};
#define W9968CF_PACKET_SIZE 1023 /* according to wMaxPacketSizes[] */
#define W9968CF_MIN_PACKET_SIZE 63 /* minimum value */
#define W9968CF_ISO_PACKETS 5 /* n.of packets for isochronous transfers */
@@ -134,7 +134,7 @@
****************************************************************************/
#define W9968CF_MODULE_NAME "V4L driver for W996[87]CF JPEG USB " \
- "Dual Mode Camera Chip"
+ "Dual Mode Camera Chip"
#define W9968CF_MODULE_VERSION "1:1.33-basic"
#define W9968CF_MODULE_AUTHOR "(C) 2002-2004 Luca Risolia"
#define W9968CF_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
@@ -270,9 +270,9 @@
/* Locks */
struct mutex dev_mutex, /* for probe, disconnect,open and close */
- fileop_mutex; /* for read and ioctl */
+ fileop_mutex; /* for read and ioctl */
spinlock_t urb_lock, /* for submit_urb() and unlink_urb() */
- flist_lock; /* for requested frame list accesses */
+ flist_lock; /* for requested frame list accesses */
wait_queue_head_t open, wait_queue;
char command[16]; /* name of the program holding the device */
@@ -299,7 +299,7 @@
dev_warn(&cam->dev, fmt "\n", ## args); \
else if ((level) >= 5) \
dev_info(&cam->dev, "[%s:%d] " fmt "\n", \
- __FUNCTION__, __LINE__ , ## args); \
+ __FUNCTION__, __LINE__ , ## args); \
} \
}
/* For generic kernel (not device specific) messages */
@@ -311,7 +311,7 @@
pr_info("w9968cf: " fmt "\n", ## args); \
else if ((level) >= 5) \
pr_debug("w9968cf: [%s:%d] " fmt "\n", __FUNCTION__, \
- __LINE__ , ## args); \
+ __LINE__ , ## args); \
} \
}
#else
diff --git a/drivers/media/video/w9968cf_decoder.h b/drivers/media/video/w9968cf_decoder.h
index 31faccb..59decbf 100644
--- a/drivers/media/video/w9968cf_decoder.h
+++ b/drivers/media/video/w9968cf_decoder.h
@@ -78,9 +78,9 @@
#define W9968CF_DEC_ERR_NO_EOI -6
extern void w9968cf_init_decoder(void);
-extern int w9968cf_check_headers(const unsigned char* Pin,
- const unsigned long BUF_SIZE);
-extern int w9968cf_decode(const char* Pin, const unsigned long BUF_SIZE,
- const unsigned W, const unsigned H, char* Pout);
+extern int w9968cf_check_headers(const unsigned char* Pin,
+ const unsigned long BUF_SIZE);
+extern int w9968cf_decode(const char* Pin, const unsigned long BUF_SIZE,
+ const unsigned W, const unsigned H, char* Pout);
#endif /* _W9968CF_DECODER_H_ */
diff --git a/drivers/media/video/w9968cf_vpp.h b/drivers/media/video/w9968cf_vpp.h
index f3b91b7..88c9b6c 100644
--- a/drivers/media/video/w9968cf_vpp.h
+++ b/drivers/media/video/w9968cf_vpp.h
@@ -29,7 +29,7 @@
struct module* owner;
int (*check_headers)(const unsigned char*, const unsigned long);
int (*decode)(const char*, const unsigned long, const unsigned,
- const unsigned, char*);
+ const unsigned, char*);
void (*swap_yuvbytes)(void*, unsigned long);
void (*uyvy_to_rgbx)(u8*, unsigned long, u8*, u16, u8);
void (*scale_up)(u8*, u8*, u16, u16, u16, u16, u16);
diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h
index 8e06551..b9c93b8 100644
--- a/drivers/media/video/zc0301/zc0301.h
+++ b/drivers/media/video/zc0301/zc0301.h
@@ -157,7 +157,7 @@
dev_info(&cam->usbdev->dev, fmt "\n", ## args); \
else if ((level) >= 3) \
dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
- __FUNCTION__, __LINE__ , ## args); \
+ __FUNCTION__, __LINE__ , ## args); \
} \
} while (0)
# define KDBG(level, fmt, args...) \
@@ -167,7 +167,7 @@
pr_info("zc0301: " fmt "\n", ## args); \
else if ((level) == 3) \
pr_debug("zc0301: [%s:%d] " fmt "\n", __FUNCTION__, \
- __LINE__ , ## args); \
+ __LINE__ , ## args); \
} \
} while (0)
# define V4LDBG(level, name, cmd) \
@@ -184,7 +184,7 @@
#undef PDBG
#define PDBG(fmt, args...) \
dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \
- __FUNCTION__, __LINE__ , ## args)
+ __FUNCTION__, __LINE__ , ## args)
#undef PDBGG
#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index 4036c626..0fad397 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -48,7 +48,7 @@
/*****************************************************************************/
#define ZC0301_MODULE_NAME "V4L2 driver for ZC0301 " \
- "Image Processor and Control Chip"
+ "Image Processor and Control Chip"
#define ZC0301_MODULE_AUTHOR "(C) 2006 Luca Risolia"
#define ZC0301_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
#define ZC0301_MODULE_LICENSE "GPL"
@@ -67,67 +67,67 @@
static short video_nr[] = {[0 ... ZC0301_MAX_DEVICES-1] = -1};
module_param_array(video_nr, short, NULL, 0444);
MODULE_PARM_DESC(video_nr,
- "\n<-1|n[,...]> Specify V4L2 minor mode number."
- "\n -1 = use next available (default)"
- "\n n = use minor number n (integer >= 0)"
- "\nYou can specify up to "
- __MODULE_STRING(ZC0301_MAX_DEVICES) " cameras this way."
- "\nFor example:"
- "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
- "\nthe second registered camera and use auto for the first"
- "\none and for every other camera."
- "\n");
+ "\n<-1|n[,...]> Specify V4L2 minor mode number."
+ "\n -1 = use next available (default)"
+ "\n n = use minor number n (integer >= 0)"
+ "\nYou can specify up to "
+ __MODULE_STRING(ZC0301_MAX_DEVICES) " cameras this way."
+ "\nFor example:"
+ "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+ "\nthe second registered camera and use auto for the first"
+ "\none and for every other camera."
+ "\n");
static short force_munmap[] = {[0 ... ZC0301_MAX_DEVICES-1] =
- ZC0301_FORCE_MUNMAP};
+ ZC0301_FORCE_MUNMAP};
module_param_array(force_munmap, bool, NULL, 0444);
MODULE_PARM_DESC(force_munmap,
- "\n<0|1[,...]> Force the application to unmap previously"
- "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
- "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
- "\nthis feature. This parameter is specific for each"
- "\ndetected camera."
- "\n 0 = do not force memory unmapping"
- "\n 1 = force memory unmapping (save memory)"
- "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
- "\n");
+ "\n<0|1[,...]> Force the application to unmap previously"
+ "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+ "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+ "\nthis feature. This parameter is specific for each"
+ "\ndetected camera."
+ "\n 0 = do not force memory unmapping"
+ "\n 1 = force memory unmapping (save memory)"
+ "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+ "\n");
static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] =
- ZC0301_FRAME_TIMEOUT};
+ ZC0301_FRAME_TIMEOUT};
module_param_array(frame_timeout, uint, NULL, 0644);
MODULE_PARM_DESC(frame_timeout,
- "\n<n[,...]> Timeout for a video frame in seconds."
- "\nThis parameter is specific for each detected camera."
- "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"."
- "\n");
+ "\n<n[,...]> Timeout for a video frame in seconds."
+ "\nThis parameter is specific for each detected camera."
+ "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"."
+ "\n");
#ifdef ZC0301_DEBUG
static unsigned short debug = ZC0301_DEBUG_LEVEL;
module_param(debug, ushort, 0644);
MODULE_PARM_DESC(debug,
- "\n<n> Debugging information level, from 0 to 3:"
- "\n0 = none (use carefully)"
- "\n1 = critical errors"
- "\n2 = significant informations"
- "\n3 = more verbose messages"
- "\nLevel 3 is useful for testing only, when only "
- "one device is used."
- "\nDefault value is "__MODULE_STRING(ZC0301_DEBUG_LEVEL)"."
- "\n");
+ "\n<n> Debugging information level, from 0 to 3:"
+ "\n0 = none (use carefully)"
+ "\n1 = critical errors"
+ "\n2 = significant informations"
+ "\n3 = more verbose messages"
+ "\nLevel 3 is useful for testing only, when only "
+ "one device is used."
+ "\nDefault value is "__MODULE_STRING(ZC0301_DEBUG_LEVEL)"."
+ "\n");
#endif
/*****************************************************************************/
static u32
zc0301_request_buffers(struct zc0301_device* cam, u32 count,
- enum zc0301_io_method io)
+ enum zc0301_io_method io)
{
struct v4l2_pix_format* p = &(cam->sensor.pix_format);
struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
const size_t imagesize = cam->module_param.force_munmap ||
- io == IO_READ ?
- (p->width * p->height * p->priv) / 8 :
- (r->width * r->height * p->priv) / 8;
+ io == IO_READ ?
+ (p->width * p->height * p->priv) / 8 :
+ (r->width * r->height * p->priv) / 8;
void* buff = NULL;
u32 i;
@@ -216,7 +216,7 @@
int res;
res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0xa0, 0x40,
- value, index, NULL, 0, ZC0301_CTRL_TIMEOUT);
+ value, index, NULL, 0, ZC0301_CTRL_TIMEOUT);
if (res < 0) {
DBG(3, "Failed to write a register (index 0x%04X, "
"value 0x%02X, error %d)",index, value, res);
@@ -234,7 +234,7 @@
int res;
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0xa1, 0xc0,
- 0x0001, index, buff, 1, ZC0301_CTRL_TIMEOUT);
+ 0x0001, index, buff, 1, ZC0301_CTRL_TIMEOUT);
if (res < 0)
DBG(3, "Failed to read a register (index 0x%04X, error %d)",
index, res);
@@ -337,11 +337,11 @@
if (!(*f))
(*f) = list_entry(cam->inqueue.next, struct zc0301_frame_t,
- frame);
+ frame);
imagesize = (cam->sensor.pix_format.width *
- cam->sensor.pix_format.height *
- cam->sensor.pix_format.priv) / 8;
+ cam->sensor.pix_format.height *
+ cam->sensor.pix_format.priv) / 8;
for (i = 0; i < urb->number_of_packets; i++) {
unsigned int len, status;
@@ -395,8 +395,8 @@
list_move_tail(&(*f)->frame, &cam->outqueue);
if (!list_empty(&cam->inqueue))
(*f) = list_entry(cam->inqueue.next,
- struct zc0301_frame_t,
- frame);
+ struct zc0301_frame_t,
+ frame);
else
(*f) = NULL;
spin_unlock(&cam->queue_lock);
@@ -429,14 +429,14 @@
struct usb_device *udev = cam->usbdev;
struct urb* urb;
const unsigned int wMaxPacketSize[] = {0, 128, 192, 256, 384,
- 512, 768, 1023};
+ 512, 768, 1023};
const unsigned int psz = wMaxPacketSize[ZC0301_ALTERNATE_SETTING];
s8 i, j;
int err = 0;
for (i = 0; i < ZC0301_URBS; i++) {
cam->transfer_buffer[i] = kzalloc(ZC0301_ISO_PACKETS * psz,
- GFP_KERNEL);
+ GFP_KERNEL);
if (!cam->transfer_buffer[i]) {
err = -ENOMEM;
DBG(1, "Not enough memory");
@@ -528,9 +528,9 @@
cam->stream = STREAM_INTERRUPT;
timeout = wait_event_timeout(cam->wait_stream,
- (cam->stream == STREAM_OFF) ||
- (cam->state & DEV_DISCONNECTED),
- ZC0301_URB_TIMEOUT);
+ (cam->stream == STREAM_OFF) ||
+ (cam->state & DEV_DISCONNECTED),
+ ZC0301_URB_TIMEOUT);
if (cam->state & DEV_DISCONNECTED)
return -ENODEV;
else if (cam->stream != STREAM_OFF) {
@@ -548,7 +548,7 @@
static int
zc0301_set_compression(struct zc0301_device* cam,
- struct v4l2_jpegcompression* compression)
+ struct v4l2_jpegcompression* compression)
{
int r, err = 0;
@@ -670,8 +670,8 @@
}
mutex_unlock(&cam->dev_mutex);
err = wait_event_interruptible_exclusive(cam->open,
- cam->state & DEV_DISCONNECTED
- || !cam->users);
+ cam->state & DEV_DISCONNECTED
+ || !cam->users);
if (err) {
up_read(&zc0301_disconnect);
return err;
@@ -802,12 +802,12 @@
return -EAGAIN;
}
timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- cam->module_param.frame_timeout *
- 1000 * msecs_to_jiffies(1) );
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED),
+ cam->module_param.frame_timeout *
+ 1000 * msecs_to_jiffies(1) );
if (timeout < 0) {
mutex_unlock(&cam->fileop_mutex);
return timeout;
@@ -930,7 +930,7 @@
{
struct zc0301_device* cam = video_get_drvdata(video_devdata(filp));
unsigned long size = vma->vm_end - vma->vm_start,
- start = vma->vm_start;
+ start = vma->vm_start;
void *pos;
u32 i;
@@ -998,13 +998,13 @@
.driver = "zc0301",
.version = ZC0301_MODULE_VERSION_CODE,
.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING,
+ V4L2_CAP_STREAMING,
};
strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
- sizeof(cap.bus_info));
+ sizeof(cap.bus_info));
if (copy_to_user(arg, &cap, sizeof(cap)))
return -EFAULT;
@@ -1337,7 +1337,7 @@
static int
zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd,
- void __user * arg)
+ void __user * arg)
{
struct zc0301_sensor* s = &cam->sensor;
struct v4l2_format format;
@@ -1600,7 +1600,7 @@
static int
zc0301_vidioc_dqbuf(struct zc0301_device* cam, struct file* filp,
- void __user * arg)
+ void __user * arg)
{
struct v4l2_buffer b;
struct zc0301_frame_t *f;
@@ -1619,12 +1619,12 @@
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
timeout = wait_event_interruptible_timeout
- ( cam->wait_frame,
- (!list_empty(&cam->outqueue)) ||
- (cam->state & DEV_DISCONNECTED) ||
- (cam->state & DEV_MISCONFIGURED),
- cam->module_param.frame_timeout *
- 1000 * msecs_to_jiffies(1) );
+ ( cam->wait_frame,
+ (!list_empty(&cam->outqueue)) ||
+ (cam->state & DEV_DISCONNECTED) ||
+ (cam->state & DEV_MISCONFIGURED),
+ cam->module_param.frame_timeout *
+ 1000 * msecs_to_jiffies(1) );
if (timeout < 0)
return timeout;
if (cam->state & DEV_DISCONNECTED)
@@ -1748,7 +1748,7 @@
static int zc0301_ioctl_v4l2(struct inode* inode, struct file* filp,
- unsigned int cmd, void __user * arg)
+ unsigned int cmd, void __user * arg)
{
struct zc0301_device* cam = video_get_drvdata(video_devdata(filp));
@@ -1842,7 +1842,7 @@
static int zc0301_ioctl(struct inode* inode, struct file* filp,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg)
{
struct zc0301_device* cam = video_get_drvdata(video_devdata(filp));
int err = 0;
@@ -1948,7 +1948,7 @@
mutex_lock(&cam->dev_mutex);
err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
- video_nr[dev_nr]);
+ video_nr[dev_nr]);
if (err) {
DBG(1, "V4L2 device registration failed");
if (err == -ENFILE && video_nr[dev_nr] == -1)
diff --git a/drivers/media/video/zc0301/zc0301_pas202bcb.c b/drivers/media/video/zc0301/zc0301_pas202bcb.c
index 9d282a2..eaadf02 100644
--- a/drivers/media/video/zc0301/zc0301_pas202bcb.c
+++ b/drivers/media/video/zc0301/zc0301_pas202bcb.c
@@ -24,10 +24,10 @@
/*
NOTE: Sensor controls are disabled for now, becouse changing them while
- streaming sometimes results in out-of-sync video frames. We'll use
- the default initialization, until we know how to stop and start video
- in the chip. However, the image quality still looks good under various
- light conditions.
+ streaming sometimes results in out-of-sync video frames. We'll use
+ the default initialization, until we know how to stop and start video
+ in the chip. However, the image quality still looks good under various
+ light conditions.
*/
#include <linux/delay.h>
@@ -165,7 +165,7 @@
static int pas202bcb_get_ctrl(struct zc0301_device* cam,
- struct v4l2_control* ctrl)
+ struct v4l2_control* ctrl)
{
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
@@ -208,7 +208,7 @@
static int pas202bcb_set_ctrl(struct zc0301_device* cam,
- const struct v4l2_control* ctrl)
+ const struct v4l2_control* ctrl)
{
int err = 0;
diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h
index cf0965a..1f95c28 100644
--- a/drivers/media/video/zc0301/zc0301_sensor.h
+++ b/drivers/media/video/zc0301/zc0301_sensor.h
@@ -51,7 +51,7 @@
#define ZC0301_USB_DEVICE(vend, prod, intclass) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
- USB_DEVICE_ID_MATCH_INT_CLASS, \
+ USB_DEVICE_ID_MATCH_INT_CLASS, \
.idVendor = (vend), \
.idProduct = (prod), \
.bInterfaceClass = (intclass)
@@ -92,7 +92,7 @@
int (*init)(struct zc0301_device*);
int (*get_ctrl)(struct zc0301_device*, struct v4l2_control* ctrl);
int (*set_ctrl)(struct zc0301_device*,
- const struct v4l2_control* ctrl);
+ const struct v4l2_control* ctrl);
int (*set_crop)(struct zc0301_device*, const struct v4l2_rect* rect);
/* Private */
diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h
index ad04a12..0166f55 100644
--- a/drivers/media/video/zoran.h
+++ b/drivers/media/video/zoran.h
@@ -1,4 +1,4 @@
-/*
+/*
* zoran - Iomega Buz driver
*
* Copyright (C) 1999 Rainer Johanni <Rainer@Johanni.de>
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index b22dbb6..0a85c9e 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -4,7 +4,7 @@
* Media Labs LML33/LML33R10.
*
* This part handles card-specific data and detection
- *
+ *
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
*
* Currently maintained by:
diff --git a/drivers/media/video/zoran_card.h b/drivers/media/video/zoran_card.h
index e5b6acd..ad997c30 100644
--- a/drivers/media/video/zoran_card.h
+++ b/drivers/media/video/zoran_card.h
@@ -4,7 +4,7 @@
* Media Labs LML33/LML33R10.
*
* This part handles card-specific data and detection
- *
+ *
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
*
* Currently maintained by:
diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c
index 4e15afd..c690b2e 100644
--- a/drivers/media/video/zoran_device.c
+++ b/drivers/media/video/zoran_device.c
@@ -4,7 +4,7 @@
* Media Labs LML33/LML33R10.
*
* This part handles device access (PCI/I2C/codec/...)
- *
+ *
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
*
* Currently maintained by:
@@ -492,7 +492,7 @@
/* (Ronald) don't write this if overlay_mask = NULL */
if (zr->overlay_mask) {
/* Write overlay clipping mask data, but don't enable overlay clipping */
- /* RJ: since this makes only sense on the screen, we use
+ /* RJ: since this makes only sense on the screen, we use
* zr->overlay_settings.width instead of video_width */
mask_line_size = (BUZ_MAX_WIDTH + 31) / 32;
@@ -819,12 +819,12 @@
if (zr->card.vfe_pol.hsync_pol)
btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
else
- btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
+ btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR);
reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) |
(tvn->Wt << ZR36057_HSP_LineTot);
btwrite(reg, ZR36057_HSP);
reg = ((zr->jpg_settings.img_x +
- tvn->HStart + 4) << ZR36057_FHAP_NAX) |
+ tvn->HStart + 4) << ZR36057_FHAP_NAX) |
(zr->jpg_settings.img_width << ZR36057_FHAP_PAX);
btwrite(reg, ZR36057_FHAP);
@@ -1272,15 +1272,15 @@
if (zr->JPEG_error != 1) {
/*
* First entry: error just happened during normal operation
- *
+ *
* In BUZ_MODE_MOTION_COMPRESS:
- *
+ *
* Possible glitch in TV signal. In this case we should
* stop the codec and wait for good quality signal before
* restarting it to avoid further problems
- *
+ *
* In BUZ_MODE_MOTION_DECOMPRESS:
- *
+ *
* Bad JPEG frame: we have to mark it as processed (codec crashed
* and was not able to do it itself), and to remove it from queue.
*/
diff --git a/drivers/media/video/zoran_device.h b/drivers/media/video/zoran_device.h
index f315203..f19705c 100644
--- a/drivers/media/video/zoran_device.h
+++ b/drivers/media/video/zoran_device.h
@@ -4,7 +4,7 @@
* Media Labs LML33/LML33R10.
*
* This part handles card-specific data and detection
- *
+ *
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
*
* Currently maintained by:
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index b2c6e01..b5a576a 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -94,7 +94,7 @@
V4L2_CAP_VIDEO_CAPTURE |\
V4L2_CAP_VIDEO_OUTPUT |\
V4L2_CAP_VIDEO_OVERLAY \
- )
+ )
#endif
#include <asm/byteorder.h>
@@ -165,7 +165,7 @@
#endif
.depth = 16,
.flags = ZORAN_FORMAT_CAPTURE |
- ZORAN_FORMAT_OVERLAY,
+ ZORAN_FORMAT_OVERLAY,
}, {
.name = "Hardware-encoded Motion-JPEG",
.palette = -1,
@@ -670,7 +670,7 @@
j]))));
free_page((unsigned long)
bus_to_virt
- (le32_to_cpu
+ (le32_to_cpu
(fh->jpg_buffers.
buffer[i].
frag_tab[2 * j])));
@@ -1871,7 +1871,7 @@
static int
zoran_set_norm (struct zoran *zr,
- int norm) /* VIDEO_MODE_* */
+ int norm) /* VIDEO_MODE_* */
{
int norm_encoder, on;
@@ -2006,9 +2006,9 @@
static int
zoran_do_ioctl (struct inode *inode,
- struct file *file,
- unsigned int cmd,
- void *arg)
+ struct file *file,
+ unsigned int cmd,
+ void *arg)
{
struct zoran_fh *fh = file->private_data;
struct zoran *zr = fh->zr;
@@ -2095,7 +2095,7 @@
break;
/* RJ: the documentation at http://roadrunner.swansea.linux.org.uk/v4lapi.shtml says:
- *
+ *
* * "The VIDIOCSCHAN ioctl takes an integer argument and switches the capture to this input."
* * ^^^^^^^
* * The famos BTTV driver has it implemented with a struct video_channel argument
diff --git a/drivers/media/video/zoran_procfs.c b/drivers/media/video/zoran_procfs.c
index f0d9b13..a00fae9 100644
--- a/drivers/media/video/zoran_procfs.c
+++ b/drivers/media/video/zoran_procfs.c
@@ -4,7 +4,7 @@
* Media Labs LML33/LML33R10.
*
* This part handles the procFS entries (/proc/ZORAN[%d])
- *
+ *
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
*
* Currently maintained by:
diff --git a/drivers/media/video/zoran_procfs.h b/drivers/media/video/zoran_procfs.h
index 8904fc9..f2d5b1b 100644
--- a/drivers/media/video/zoran_procfs.h
+++ b/drivers/media/video/zoran_procfs.h
@@ -4,7 +4,7 @@
* Media Labs LML33/LML33R10.
*
* This part handles card-specific data and detection
- *
+ *
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
*
* Currently maintained by:
diff --git a/drivers/media/video/zr36016.c b/drivers/media/video/zr36016.c
index 10130ef..62f7758 100644
--- a/drivers/media/video/zr36016.c
+++ b/drivers/media/video/zr36016.c
@@ -34,7 +34,7 @@
#include <linux/types.h>
#include <linux/wait.h>
-/* includes for structures and defines regarding video
+/* includes for structures and defines regarding video
#include<linux/videodev.h> */
/* I/O commands, error codes */
@@ -143,8 +143,8 @@
static void
zr36016_writei (struct zr36016 *ptr,
- u16 reg,
- u8 value)
+ u16 reg,
+ u8 value)
{
dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name,
value, reg);
@@ -192,7 +192,7 @@
dprintk(1, "\n");
}
// for testing just write 0, then the default value to a register and read
- // it back in both cases
+ // it back in both cases
zr36016_writei(ptr, ZR016I_PAX_LO, 0x00);
if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) {
dprintk(1,
@@ -232,17 +232,17 @@
static int zr36016_pushit (struct zr36016 *ptr,
u16 startreg,
u16 len,
- const char *data)
+ const char *data)
{
- int i=0;
+ int i=0;
- dprintk(4, "%s: write data block to 0x%04x (len=%d)\n",
+ dprintk(4, "%s: write data block to 0x%04x (len=%d)\n",
ptr->name, startreg,len);
- while (i<len) {
- zr36016_writei(ptr, startreg++, data[i++]);
- }
+ while (i<len) {
+ zr36016_writei(ptr, startreg++, data[i++]);
+ }
- return i;
+ return i;
}
#endif
diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c
index 6699725..a6bbd12 100644
--- a/drivers/media/video/zr36050.c
+++ b/drivers/media/video/zr36050.c
@@ -34,7 +34,7 @@
#include <linux/types.h>
#include <linux/wait.h>
-/* includes for structures and defines regarding video
+/* includes for structures and defines regarding video
#include<linux/videodev.h> */
/* I/O commands, error codes */
@@ -171,7 +171,7 @@
/* =========================================================================
Local helper function:
- basic test of "connectivity", writes/reads to/from memory the SOF marker
+ basic test of "connectivity", writes/reads to/from memory the SOF marker
========================================================================= */
static int
@@ -218,9 +218,9 @@
static int
zr36050_pushit (struct zr36050 *ptr,
- u16 startreg,
- u16 len,
- const char *data)
+ u16 startreg,
+ u16 len,
+ const char *data)
{
int i = 0;
@@ -345,7 +345,7 @@
/* ------------------------------------------------------------------------- */
/* SOF (start of frame) segment depends on width, height and sampling ratio
- of each color component */
+ of each color component */
static int
zr36050_set_sof (struct zr36050 *ptr)
@@ -376,8 +376,8 @@
/* ------------------------------------------------------------------------- */
-/* SOS (start of scan) segment depends on the used scan components
- of each color component */
+/* SOS (start of scan) segment depends on the used scan components
+ of each color component */
static int
zr36050_set_sos (struct zr36050 *ptr)
diff --git a/drivers/media/video/zr36057.h b/drivers/media/video/zr36057.h
index 159abfa..54c9362 100644
--- a/drivers/media/video/zr36057.h
+++ b/drivers/media/video/zr36057.h
@@ -1,4 +1,4 @@
-/*
+/*
* zr36057.h - zr36057 register offsets
*
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
@@ -27,14 +27,14 @@
#define ZR36057_VFEHCR 0x000 /* Video Front End, Horizontal Configuration Register */
#define ZR36057_VFEHCR_HSPol (1<<30)
#define ZR36057_VFEHCR_HStart 10
-#define ZR36057_VFEHCR_HEnd 0
-#define ZR36057_VFEHCR_Hmask 0x3ff
+#define ZR36057_VFEHCR_HEnd 0
+#define ZR36057_VFEHCR_Hmask 0x3ff
#define ZR36057_VFEVCR 0x004 /* Video Front End, Vertical Configuration Register */
#define ZR36057_VFEVCR_VSPol (1<<30)
#define ZR36057_VFEVCR_VStart 10
-#define ZR36057_VFEVCR_VEnd 0
-#define ZR36057_VFEVCR_Vmask 0x3ff
+#define ZR36057_VFEVCR_VEnd 0
+#define ZR36057_VFEVCR_Vmask 0x3ff
#define ZR36057_VFESPFR 0x008 /* Video Front End, Scaler and Pixel Format Register */
#define ZR36057_VFESPFR_ExtFl (1<<26)
diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c
index d8dd003..97c8f9b 100644
--- a/drivers/media/video/zr36060.c
+++ b/drivers/media/video/zr36060.c
@@ -34,7 +34,7 @@
#include <linux/types.h>
#include <linux/wait.h>
-/* includes for structures and defines regarding video
+/* includes for structures and defines regarding video
#include<linux/videodev.h> */
/* I/O commands, error codes */
@@ -173,7 +173,7 @@
/* =========================================================================
Local helper function:
- basic test of "connectivity", writes/reads to/from memory the SOF marker
+ basic test of "connectivity", writes/reads to/from memory the SOF marker
========================================================================= */
static int
@@ -208,9 +208,9 @@
static int
zr36060_pushit (struct zr36060 *ptr,
- u16 startreg,
- u16 len,
- const char *data)
+ u16 startreg,
+ u16 len,
+ const char *data)
{
int i = 0;
@@ -335,7 +335,7 @@
/* ------------------------------------------------------------------------- */
/* SOF (start of frame) segment depends on width, height and sampling ratio
- of each color component */
+ of each color component */
static int
zr36060_set_sof (struct zr36060 *ptr)
@@ -367,8 +367,8 @@
/* ------------------------------------------------------------------------- */
-/* SOS (start of scan) segment depends on the used scan components
- of each color component */
+/* SOS (start of scan) segment depends on the used scan components
+ of each color component */
static int
zr36060_set_sos (struct zr36060 *ptr)
@@ -385,7 +385,7 @@
for (i = 0; i < NO_OF_COMPONENTS; i++) {
sos_data[5 + (i * 2)] = i; // index
sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) |
- zr36060_ta[i]; // AC/DC tbl.sel.
+ zr36060_ta[i]; // AC/DC tbl.sel.
}
sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start
sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f;
@@ -999,7 +999,7 @@
dprintk(1,
"zr36060: something's wrong - %d codecs left somehow.\n",
zr36060_codecs);
- }
+ }
/* however, we can't just stay alive */
videocodec_unregister(&zr36060_codec);
diff --git a/drivers/media/video/zr36120.c b/drivers/media/video/zr36120.c
index d4c633b..9d340aa 100644
--- a/drivers/media/video/zr36120.c
+++ b/drivers/media/video/zr36120.c
@@ -316,7 +316,7 @@
item->status = FBUFFER_BUSY;
if (!lastitem)
ztv->workqueue = item;
- else
+ else
lastitem->next = item;
lastitem = item;
}
@@ -516,7 +516,7 @@
zraor((ztv->vidInterlace*ystep)<<0,~ZORAN_OCR_MASKSTRIDE,ZORAN_OCR);
}
-struct tvnorm
+struct tvnorm
{
u16 Wt, Wa, Ht, Ha, HStart, VStart;
};
@@ -660,7 +660,7 @@
int HorDcm = 64-X;
int hcrop1 = 2*(Wa-We)/4;
/*
- * BUGFIX: Juha Nurmela <junki@qn-lpr2-165.quicknet.inet.fi>
+ * BUGFIX: Juha Nurmela <junki@qn-lpr2-165.quicknet.inet.fi>
* found the solution to the color phase shift.
* See ChangeLog for the full explanation)
*/
@@ -812,12 +812,12 @@
zoran_common_close(ztv);
- /*
- * This is sucky but right now I can't find a good way to
- * be sure its safe to free the buffer. We wait 5-6 fields
- * which is more than sufficient to be sure.
- */
- msleep(100); /* Wait 1/10th of a second */
+ /*
+ * This is sucky but right now I can't find a good way to
+ * be sure its safe to free the buffer. We wait 5-6 fields
+ * which is more than sufficient to be sure.
+ */
+ msleep(100); /* Wait 1/10th of a second */
/* free the allocated framebuffer */
bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE);
@@ -1436,7 +1436,7 @@
/* Why isn't this in the API?
* And why doesn't it take a buffer number?
- case BTTV_FIELDNR:
+ case BTTV_FIELDNR:
{
unsigned long v = ztv->lastfieldnr;
if (copy_to_user(arg,&v,sizeof(v)))
@@ -1557,12 +1557,12 @@
zoran_common_close(ztv);
- /*
- * This is sucky but right now I can't find a good way to
- * be sure its safe to free the buffer. We wait 5-6 fields
- * which is more than sufficient to be sure.
- */
- msleep(100); /* Wait 1/10th of a second */
+ /*
+ * This is sucky but right now I can't find a good way to
+ * be sure its safe to free the buffer. We wait 5-6 fields
+ * which is more than sufficient to be sure.
+ */
+ msleep(100); /* Wait 1/10th of a second */
for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++)
{
@@ -1620,7 +1620,7 @@
write_unlock_irq(&ztv->lock);
return -EWOULDBLOCK;
}
-
+
/* mark the unused buffer as wanted */
unused->status = FBUFFER_BUSY;
unused->next = 0;
@@ -1671,7 +1671,7 @@
if (count == 2*19*2048) {
/*
* Extreme HACK, old VBI programs expect 2048 points
- * of data, and we only got 864 orso. Double each
+ * of data, and we only got 864 orso. Double each
* datapoint and clear the rest of the line.
* This way we have appear to have a
* sample_frequency of 29.5 Mc.
@@ -1956,7 +1956,7 @@
zrand(~ZORAN_VDC_TRICOM, ZORAN_VDC);
/* external FL determines TOP frame */
- zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC);
+ zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC);
/* set HSpol */
if (ztv->card->hsync_pos)
@@ -2012,7 +2012,7 @@
struct zoran *ztv;
int i;
- for (i=0;i<max; i++)
+ for (i=0;i<max; i++)
{
ztv = &zorans[i];
@@ -2029,7 +2029,7 @@
/* free it */
free_irq(ztv->dev->irq,ztv);
-
+
/* unregister i2c_bus */
i2c_unregister_bus((&ztv->i2c));
@@ -2050,7 +2050,7 @@
int __init zr36120_init(void)
{
int card;
-
+
handle_chipset();
zoran_cards = find_zoran();
if (zoran_cards<0)
@@ -2063,7 +2063,7 @@
/* only release the zorans we have registered */
release_zoran(card);
return -EIO;
- }
+ }
}
return 0;
}
diff --git a/drivers/media/video/zr36120.h b/drivers/media/video/zr36120.h
index 571f8e8..a71e485 100644
--- a/drivers/media/video/zr36120.h
+++ b/drivers/media/video/zr36120.h
@@ -1,4 +1,4 @@
-/*
+/*
zr36120.h - Zoran 36120/36125 based framegrabbers
Copyright (C) 1998-1999 Pauline Middelink (middelin@polyware.nl)
@@ -89,7 +89,7 @@
ulong* overlay; /* kernel addr of overlay mask */
};
-struct zoran
+struct zoran
{
struct video_device video_dev;
#define CARD_DEBUG KERN_DEBUG "%s(%lu): "
@@ -106,7 +106,7 @@
uint norm; /* 0=PAL, 1=NTSC, 2=SECAM */
uint tuner_freq; /* Current freq in kHz */
struct video_picture picture; /* Current picture params */
-
+
/* videocard details */
uint swidth; /* screen width */
uint sheight; /* screen height */