USB: serial: f81534: clean up port bulk-out setup
Setup each port to use the first bulk-out endpoint in calc_num_ports so
that core allocates the corresponding port resources for us.
Signed-off-by: Johan Hovold <johan@kernel.org>
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 365e3ac..3d616a2 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -687,6 +687,17 @@
num_port = 4; /* Nothing found, oldest version IC */
}
+ /*
+ * Setup bulk-out endpoint multiplexing. All ports share the same
+ * bulk-out endpoint.
+ */
+ BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < F81534_NUM_PORT);
+
+ for (i = 1; i < num_port; ++i)
+ epds->bulk_out[i] = epds->bulk_out[0];
+
+ epds->num_bulk_out = num_port;
+
return num_port;
}
@@ -1078,53 +1089,6 @@
}
}
-static int f81534_setup_ports(struct usb_serial *serial)
-{
- struct usb_serial_port *port;
- u8 port0_out_address;
- int buffer_size;
- size_t i;
-
- /*
- * In our system architecture, we had 2 or 4 serial ports,
- * but only get 1 set of bulk in/out endpoints.
- *
- * The usb-serial subsystem will generate port 0 data,
- * but port 1/2/3 will not. It's will generate write URB and buffer
- * by following code and use the port0 read URB for read operation.
- */
- for (i = 1; i < serial->num_ports; ++i) {
- port0_out_address = serial->port[0]->bulk_out_endpointAddress;
- buffer_size = serial->port[0]->bulk_out_size;
- port = serial->port[i];
-
- if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
- return -ENOMEM;
-
- port->bulk_out_size = buffer_size;
- port->bulk_out_endpointAddress = port0_out_address;
-
- port->write_urbs[0] = usb_alloc_urb(0, GFP_KERNEL);
- if (!port->write_urbs[0])
- return -ENOMEM;
-
- port->bulk_out_buffers[0] = kzalloc(buffer_size, GFP_KERNEL);
- if (!port->bulk_out_buffers[0])
- return -ENOMEM;
-
- usb_fill_bulk_urb(port->write_urbs[0], serial->dev,
- usb_sndbulkpipe(serial->dev,
- port0_out_address),
- port->bulk_out_buffers[0], buffer_size,
- serial->type->write_bulk_callback, port);
-
- port->write_urb = port->write_urbs[0];
- port->bulk_out_buffer = port->bulk_out_buffers[0];
- }
-
- return 0;
-}
-
static int f81534_attach(struct usb_serial *serial)
{
struct f81534_serial_private *serial_priv;
@@ -1141,10 +1105,6 @@
mutex_init(&serial_priv->urb_mutex);
- status = f81534_setup_ports(serial);
- if (status)
- return status;
-
/* Check had custom setting */
status = f81534_find_config_idx(serial, &serial_priv->setting_idx);
if (status) {