usb: dwc3: use bus->sysdev for DMA configuration
The dma ops for dwc3 devices are not set properly. So, use a
physical device sysdev, which will be inherited from parent,
to set the hardware / firmware parameters like dma.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index e2416de..6785595 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -183,8 +183,8 @@
if (dwc->ep0_bounced && dep->number == 0)
dwc->ep0_bounced = false;
else
- usb_gadget_unmap_request(&dwc->gadget, &req->request,
- req->direction);
+ usb_gadget_unmap_request_by_dev(dwc->sysdev,
+ &req->request, req->direction);
trace_dwc3_gadget_giveback(req);
@@ -399,7 +399,7 @@
if (dep->trb_pool)
return 0;
- dep->trb_pool = dma_alloc_coherent(dwc->dev,
+ dep->trb_pool = dma_alloc_coherent(dwc->sysdev,
sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
&dep->trb_pool_dma, GFP_KERNEL);
if (!dep->trb_pool) {
@@ -415,7 +415,7 @@
{
struct dwc3 *dwc = dep->dwc;
- dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
+ dma_free_coherent(dwc->sysdev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
dep->trb_pool, dep->trb_pool_dma);
dep->trb_pool = NULL;
@@ -1171,8 +1171,8 @@
trace_dwc3_ep_queue(req);
- ret = usb_gadget_map_request(&dwc->gadget, &req->request,
- dep->direction);
+ ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request,
+ dep->direction);
if (ret)
return ret;
@@ -2977,7 +2977,7 @@
dwc->irq_gadget = irq;
- dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
+ dwc->ctrl_req = dma_alloc_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req),
&dwc->ctrl_req_addr, GFP_KERNEL);
if (!dwc->ctrl_req) {
dev_err(dwc->dev, "failed to allocate ctrl request\n");
@@ -2985,8 +2985,9 @@
goto err0;
}
- dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
- &dwc->ep0_trb_addr, GFP_KERNEL);
+ dwc->ep0_trb = dma_alloc_coherent(dwc->sysdev,
+ sizeof(*dwc->ep0_trb) * 2,
+ &dwc->ep0_trb_addr, GFP_KERNEL);
if (!dwc->ep0_trb) {
dev_err(dwc->dev, "failed to allocate ep0 trb\n");
ret = -ENOMEM;
@@ -2999,7 +3000,7 @@
goto err2;
}
- dwc->ep0_bounce = dma_alloc_coherent(dwc->dev,
+ dwc->ep0_bounce = dma_alloc_coherent(dwc->sysdev,
DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr,
GFP_KERNEL);
if (!dwc->ep0_bounce) {
@@ -3072,18 +3073,18 @@
err4:
dwc3_gadget_free_endpoints(dwc);
- dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
+ dma_free_coherent(dwc->sysdev, DWC3_EP0_BOUNCE_SIZE,
dwc->ep0_bounce, dwc->ep0_bounce_addr);
err3:
kfree(dwc->setup_buf);
err2:
- dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
+ dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2,
dwc->ep0_trb, dwc->ep0_trb_addr);
err1:
- dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
+ dma_free_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req),
dwc->ctrl_req, dwc->ctrl_req_addr);
err0:
@@ -3098,16 +3099,16 @@
dwc3_gadget_free_endpoints(dwc);
- dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
+ dma_free_coherent(dwc->sysdev, DWC3_EP0_BOUNCE_SIZE,
dwc->ep0_bounce, dwc->ep0_bounce_addr);
kfree(dwc->setup_buf);
kfree(dwc->zlp_buf);
- dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
+ dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2,
dwc->ep0_trb, dwc->ep0_trb_addr);
- dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
+ dma_free_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req),
dwc->ctrl_req, dwc->ctrl_req_addr);
}