| /* |
| * Pixart PAC207BCA library |
| * |
| * Copyright (C) 2008 Hans de Goede <j.w.r.degoede@hhs.nl> |
| * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li |
| * Copyleft (C) 2005 Michel Xhaard mxhaard@magic.fr |
| * |
| * V4L2 by Jean-Francois Moine <http://moinejf.free.fr> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #define MODULE_NAME "pac207" |
| |
| #include "gspca.h" |
| |
| MODULE_AUTHOR("Hans de Goede <j.w.r.degoede@hhs.nl>"); |
| MODULE_DESCRIPTION("Pixart PAC207"); |
| MODULE_LICENSE("GPL"); |
| |
| #define PAC207_CTRL_TIMEOUT 100 /* ms */ |
| |
| #define PAC207_BRIGHTNESS_MIN 0 |
| #define PAC207_BRIGHTNESS_MAX 255 |
| #define PAC207_BRIGHTNESS_DEFAULT 4 /* power on default: 4 */ |
| |
| /* An exposure value of 4 also works (3 does not) but then we need to lower |
| the compression balance setting when in 352x288 mode, otherwise the usb |
| bandwidth is not enough and packets get dropped resulting in corrupt |
| frames. The problem with this is that when the compression balance gets |
| lowered below 0x80, the pac207 starts using a different compression |
| algorithm for some lines, these lines get prefixed with a 0x2dd2 prefix |
| and currently we do not know how to decompress these lines, so for now |
| we use a minimum exposure value of 5 */ |
| #define PAC207_EXPOSURE_MIN 5 |
| #define PAC207_EXPOSURE_MAX 26 |
| #define PAC207_EXPOSURE_DEFAULT 5 /* power on default: 3 ?? */ |
| #define PAC207_EXPOSURE_KNEE 11 /* 4 = 30 fps, 11 = 8, 15 = 6 */ |
| |
| #define PAC207_GAIN_MIN 0 |
| #define PAC207_GAIN_MAX 31 |
| #define PAC207_GAIN_DEFAULT 9 /* power on default: 9 */ |
| #define PAC207_GAIN_KNEE 20 |
| |
| #define PAC207_AUTOGAIN_DEADZONE 30 |
| |
| /* specific webcam descriptor */ |
| struct sd { |
| struct gspca_dev gspca_dev; /* !! must be the first item */ |
| |
| u8 mode; |
| |
| u8 brightness; |
| u8 exposure; |
| u8 autogain; |
| u8 gain; |
| |
| u8 sof_read; |
| u8 header_read; |
| u8 autogain_ignore_frames; |
| |
| atomic_t avg_lum; |
| }; |
| |
| /* V4L2 controls supported by the driver */ |
| static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); |
| |
| static struct ctrl sd_ctrls[] = { |
| #define SD_BRIGHTNESS 0 |
| { |
| { |
| .id = V4L2_CID_BRIGHTNESS, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Brightness", |
| .minimum = PAC207_BRIGHTNESS_MIN, |
| .maximum = PAC207_BRIGHTNESS_MAX, |
| .step = 1, |
| .default_value = PAC207_BRIGHTNESS_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setbrightness, |
| .get = sd_getbrightness, |
| }, |
| #define SD_EXPOSURE 1 |
| { |
| { |
| .id = V4L2_CID_EXPOSURE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "exposure", |
| .minimum = PAC207_EXPOSURE_MIN, |
| .maximum = PAC207_EXPOSURE_MAX, |
| .step = 1, |
| .default_value = PAC207_EXPOSURE_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setexposure, |
| .get = sd_getexposure, |
| }, |
| #define SD_AUTOGAIN 2 |
| { |
| { |
| .id = V4L2_CID_AUTOGAIN, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Auto Gain", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| #define AUTOGAIN_DEF 1 |
| .default_value = AUTOGAIN_DEF, |
| .flags = 0, |
| }, |
| .set = sd_setautogain, |
| .get = sd_getautogain, |
| }, |
| #define SD_GAIN 3 |
| { |
| { |
| .id = V4L2_CID_GAIN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "gain", |
| .minimum = PAC207_GAIN_MIN, |
| .maximum = PAC207_GAIN_MAX, |
| .step = 1, |
| .default_value = PAC207_GAIN_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setgain, |
| .get = sd_getgain, |
| }, |
| }; |
| |
| static struct v4l2_pix_format sif_mode[] = { |
| {176, 144, V4L2_PIX_FMT_PAC207, V4L2_FIELD_NONE, |
| .bytesperline = 176, |
| .sizeimage = (176 + 2) * 144, |
| /* uncompressed, add 2 bytes / line for line header */ |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 1}, |
| {352, 288, V4L2_PIX_FMT_PAC207, V4L2_FIELD_NONE, |
| .bytesperline = 352, |
| /* compressed, but only when needed (not compressed |
| when the framerate is low) */ |
| .sizeimage = (352 + 2) * 288, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0}, |
| }; |
| |
| static const __u8 pac207_sensor_init[][8] = { |
| {0x10, 0x12, 0x0d, 0x12, 0x0c, 0x01, 0x29, 0xf0}, |
| {0x00, 0x64, 0x64, 0x64, 0x04, 0x10, 0xf0, 0x30}, |
| {0x00, 0x00, 0x00, 0x70, 0xa0, 0xf8, 0x00, 0x00}, |
| {0x00, 0x00, 0x32, 0x00, 0x96, 0x00, 0xa2, 0x02}, |
| {0x32, 0x00, 0x96, 0x00, 0xA2, 0x02, 0xaf, 0x00}, |
| }; |
| |
| /* 48 reg_72 Rate Control end BalSize_4a =0x36 */ |
| static const __u8 PacReg72[] = { 0x00, 0x00, 0x36, 0x00 }; |
| |
| static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index, |
| const u8 *buffer, u16 length) |
| { |
| struct usb_device *udev = gspca_dev->dev; |
| int err; |
| |
| memcpy(gspca_dev->usb_buf, buffer, length); |
| |
| err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x01, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| 0x00, index, |
| gspca_dev->usb_buf, length, PAC207_CTRL_TIMEOUT); |
| if (err < 0) |
| PDEBUG(D_ERR, |
| "Failed to write registers to index 0x%04X, error %d)", |
| index, err); |
| |
| return err; |
| } |
| |
| |
| static int pac207_write_reg(struct gspca_dev *gspca_dev, u16 index, u16 value) |
| { |
| struct usb_device *udev = gspca_dev->dev; |
| int err; |
| |
| err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| value, index, NULL, 0, PAC207_CTRL_TIMEOUT); |
| if (err) |
| PDEBUG(D_ERR, "Failed to write a register (index 0x%04X," |
| " value 0x%02X, error %d)", index, value, err); |
| |
| return err; |
| } |
| |
| static int pac207_read_reg(struct gspca_dev *gspca_dev, u16 index) |
| { |
| struct usb_device *udev = gspca_dev->dev; |
| int res; |
| |
| res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, |
| 0x00, index, |
| gspca_dev->usb_buf, 1, PAC207_CTRL_TIMEOUT); |
| if (res < 0) { |
| PDEBUG(D_ERR, |
| "Failed to read a register (index 0x%04X, error %d)", |
| index, res); |
| return res; |
| } |
| |
| return gspca_dev->usb_buf[0]; |
| } |
| |
| /* this function is called at probe time */ |
| static int sd_config(struct gspca_dev *gspca_dev, |
| const struct usb_device_id *id) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct cam *cam; |
| u8 idreg[2]; |
| |
| idreg[0] = pac207_read_reg(gspca_dev, 0x0000); |
| idreg[1] = pac207_read_reg(gspca_dev, 0x0001); |
| idreg[0] = ((idreg[0] & 0x0F) << 4) | ((idreg[1] & 0xf0) >> 4); |
| idreg[1] = idreg[1] & 0x0f; |
| PDEBUG(D_PROBE, "Pixart Sensor ID 0x%02X Chips ID 0x%02X", |
| idreg[0], idreg[1]); |
| |
| if (idreg[0] != 0x27) { |
| PDEBUG(D_PROBE, "Error invalid sensor ID!"); |
| return -ENODEV; |
| } |
| |
| PDEBUG(D_PROBE, |
| "Pixart PAC207BCA Image Processor and Control Chip detected" |
| " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct); |
| |
| cam = &gspca_dev->cam; |
| cam->epaddr = 0x05; |
| cam->cam_mode = sif_mode; |
| cam->nmodes = ARRAY_SIZE(sif_mode); |
| sd->brightness = PAC207_BRIGHTNESS_DEFAULT; |
| sd->exposure = PAC207_EXPOSURE_DEFAULT; |
| sd->gain = PAC207_GAIN_DEFAULT; |
| sd->autogain = AUTOGAIN_DEF; |
| |
| return 0; |
| } |
| |
| /* this function is called at probe and resume time */ |
| static int sd_init(struct gspca_dev *gspca_dev) |
| { |
| pac207_write_reg(gspca_dev, 0x41, 0x00); |
| /* Bit_0=Image Format, |
| * Bit_1=LED, |
| * Bit_2=Compression test mode enable */ |
| pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */ |
| pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */ |
| |
| return 0; |
| } |
| |
| /* -- start the camera -- */ |
| static void sd_start(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| __u8 mode; |
| |
| pac207_write_reg(gspca_dev, 0x0f, 0x10); /* Power control (Bit 6-0) */ |
| pac207_write_regs(gspca_dev, 0x0002, pac207_sensor_init[0], 8); |
| pac207_write_regs(gspca_dev, 0x000a, pac207_sensor_init[1], 8); |
| pac207_write_regs(gspca_dev, 0x0012, pac207_sensor_init[2], 8); |
| pac207_write_regs(gspca_dev, 0x0040, pac207_sensor_init[3], 8); |
| pac207_write_regs(gspca_dev, 0x0042, pac207_sensor_init[4], 8); |
| pac207_write_regs(gspca_dev, 0x0048, PacReg72, 4); |
| |
| /* Compression Balance */ |
| if (gspca_dev->width == 176) |
| pac207_write_reg(gspca_dev, 0x4a, 0xff); |
| else |
| pac207_write_reg(gspca_dev, 0x4a, 0x88); |
| pac207_write_reg(gspca_dev, 0x4b, 0x00); /* Sram test value */ |
| pac207_write_reg(gspca_dev, 0x08, sd->brightness); |
| |
| /* PGA global gain (Bit 4-0) */ |
| pac207_write_reg(gspca_dev, 0x0e, sd->gain); |
| pac207_write_reg(gspca_dev, 0x02, sd->exposure); /* PXCK = 12MHz /n */ |
| |
| mode = 0x02; /* Image Format (Bit 0), LED (1), Compr. test mode (2) */ |
| if (gspca_dev->width == 176) { /* 176x144 */ |
| mode |= 0x01; |
| PDEBUG(D_STREAM, "pac207_start mode 176x144"); |
| } else { /* 352x288 */ |
| PDEBUG(D_STREAM, "pac207_start mode 352x288"); |
| } |
| pac207_write_reg(gspca_dev, 0x41, mode); |
| |
| pac207_write_reg(gspca_dev, 0x13, 0x01); /* Bit 0, auto clear */ |
| pac207_write_reg(gspca_dev, 0x1c, 0x01); /* not documented */ |
| msleep(10); |
| pac207_write_reg(gspca_dev, 0x40, 0x01); /* Start ISO pipe */ |
| |
| sd->sof_read = 0; |
| sd->autogain_ignore_frames = 0; |
| atomic_set(&sd->avg_lum, -1); |
| } |
| |
| static void sd_stopN(struct gspca_dev *gspca_dev) |
| { |
| pac207_write_reg(gspca_dev, 0x40, 0x00); /* Stop ISO pipe */ |
| pac207_write_reg(gspca_dev, 0x41, 0x00); /* Turn of LED */ |
| pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */ |
| } |
| |
| /* Include pac common sof detection functions */ |
| #include "pac_common.h" |
| |
| static void pac207_do_auto_gain(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| int avg_lum = atomic_read(&sd->avg_lum); |
| |
| if (avg_lum == -1) |
| return; |
| |
| if (sd->autogain_ignore_frames > 0) |
| sd->autogain_ignore_frames--; |
| else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, |
| 100 + sd->brightness / 2, PAC207_AUTOGAIN_DEADZONE, |
| PAC207_GAIN_KNEE, PAC207_EXPOSURE_KNEE)) |
| sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES; |
| } |
| |
| static void sd_pkt_scan(struct gspca_dev *gspca_dev, |
| struct gspca_frame *frame, |
| __u8 *data, |
| int len) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| unsigned char *sof; |
| |
| sof = pac_find_sof(gspca_dev, data, len); |
| if (sof) { |
| int n; |
| |
| /* finish decoding current frame */ |
| n = sof - data; |
| if (n > sizeof pac_sof_marker) |
| n -= sizeof pac_sof_marker; |
| else |
| n = 0; |
| frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, |
| data, n); |
| sd->header_read = 0; |
| gspca_frame_add(gspca_dev, FIRST_PACKET, frame, NULL, 0); |
| len -= sof - data; |
| data = sof; |
| } |
| if (sd->header_read < 11) { |
| int needed; |
| |
| /* get average lumination from frame header (byte 5) */ |
| if (sd->header_read < 5) { |
| needed = 5 - sd->header_read; |
| if (len >= needed) |
| atomic_set(&sd->avg_lum, data[needed - 1]); |
| } |
| /* skip the rest of the header */ |
| needed = 11 - sd->header_read; |
| if (len <= needed) { |
| sd->header_read += len; |
| return; |
| } |
| data += needed; |
| len -= needed; |
| sd->header_read = 11; |
| } |
| |
| gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); |
| } |
| |
| static void setbrightness(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| pac207_write_reg(gspca_dev, 0x08, sd->brightness); |
| pac207_write_reg(gspca_dev, 0x13, 0x01); /* Bit 0, auto clear */ |
| pac207_write_reg(gspca_dev, 0x1c, 0x01); /* not documented */ |
| } |
| |
| static void setexposure(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| pac207_write_reg(gspca_dev, 0x02, sd->exposure); |
| pac207_write_reg(gspca_dev, 0x13, 0x01); /* Bit 0, auto clear */ |
| pac207_write_reg(gspca_dev, 0x1c, 0x01); /* not documented */ |
| } |
| |
| static void setgain(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| pac207_write_reg(gspca_dev, 0x0e, sd->gain); |
| pac207_write_reg(gspca_dev, 0x13, 0x01); /* Bit 0, auto clear */ |
| pac207_write_reg(gspca_dev, 0x1c, 0x01); /* not documented */ |
| } |
| |
| static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->brightness = val; |
| if (gspca_dev->streaming) |
| setbrightness(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->brightness; |
| return 0; |
| } |
| |
| static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->exposure = val; |
| if (gspca_dev->streaming) |
| setexposure(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->exposure; |
| return 0; |
| } |
| |
| static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->gain = val; |
| if (gspca_dev->streaming) |
| setgain(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->gain; |
| return 0; |
| } |
| |
| static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->autogain = val; |
| /* when switching to autogain set defaults to make sure |
| we are on a valid point of the autogain gain / |
| exposure knee graph, and give this change time to |
| take effect before doing autogain. */ |
| if (sd->autogain) { |
| sd->exposure = PAC207_EXPOSURE_DEFAULT; |
| sd->gain = PAC207_GAIN_DEFAULT; |
| if (gspca_dev->streaming) { |
| sd->autogain_ignore_frames = |
| PAC_AUTOGAIN_IGNORE_FRAMES; |
| setexposure(gspca_dev); |
| setgain(gspca_dev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->autogain; |
| return 0; |
| } |
| |
| /* sub-driver description */ |
| static const struct sd_desc sd_desc = { |
| .name = MODULE_NAME, |
| .ctrls = sd_ctrls, |
| .nctrls = ARRAY_SIZE(sd_ctrls), |
| .config = sd_config, |
| .init = sd_init, |
| .start = sd_start, |
| .stopN = sd_stopN, |
| .dq_callback = pac207_do_auto_gain, |
| .pkt_scan = sd_pkt_scan, |
| }; |
| |
| /* -- module initialisation -- */ |
| static const __devinitdata struct usb_device_id device_table[] = { |
| {USB_DEVICE(0x041e, 0x4028)}, |
| {USB_DEVICE(0x093a, 0x2460)}, |
| {USB_DEVICE(0x093a, 0x2463)}, |
| {USB_DEVICE(0x093a, 0x2464)}, |
| {USB_DEVICE(0x093a, 0x2468)}, |
| {USB_DEVICE(0x093a, 0x2470)}, |
| {USB_DEVICE(0x093a, 0x2471)}, |
| {USB_DEVICE(0x093a, 0x2472)}, |
| {USB_DEVICE(0x093a, 0x2476)}, |
| {USB_DEVICE(0x2001, 0xf115)}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(usb, device_table); |
| |
| /* -- device connect -- */ |
| static int sd_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), |
| THIS_MODULE); |
| } |
| |
| static struct usb_driver sd_driver = { |
| .name = MODULE_NAME, |
| .id_table = device_table, |
| .probe = sd_probe, |
| .disconnect = gspca_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = gspca_suspend, |
| .resume = gspca_resume, |
| #endif |
| }; |
| |
| /* -- module insert / remove -- */ |
| static int __init sd_mod_init(void) |
| { |
| if (usb_register(&sd_driver) < 0) |
| return -1; |
| PDEBUG(D_PROBE, "registered"); |
| return 0; |
| } |
| static void __exit sd_mod_exit(void) |
| { |
| usb_deregister(&sd_driver); |
| PDEBUG(D_PROBE, "deregistered"); |
| } |
| |
| module_init(sd_mod_init); |
| module_exit(sd_mod_exit); |