| /* |
| * OmniVision OV96xx Camera Driver |
| * |
| * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * Based on ov772x camera driver: |
| * |
| * Copyright (C) 2008 Renesas Solutions Corp. |
| * Kuninori Morimoto <morimoto.kuninori@renesas.com> |
| * |
| * Based on ov7670 and soc_camera_platform driver, |
| * |
| * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> |
| * Copyright (C) 2008 Magnus Damm |
| * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/v4l2-common.h> |
| #include <media/soc_camera.h> |
| |
| #include "ov9640.h" |
| |
| /* default register setup */ |
| static const struct ov9640_reg ov9640_regs_dflt[] = { |
| { OV9640_COM5, OV9640_COM5_SYSCLK | OV9640_COM5_LONGEXP }, |
| { OV9640_COM6, OV9640_COM6_OPT_BLC | OV9640_COM6_ADBLC_BIAS | |
| OV9640_COM6_FMT_RST | OV9640_COM6_ADBLC_OPTEN }, |
| { OV9640_PSHFT, OV9640_PSHFT_VAL(0x01) }, |
| { OV9640_ACOM, OV9640_ACOM_2X_ANALOG | OV9640_ACOM_RSVD }, |
| { OV9640_TSLB, OV9640_TSLB_YUYV_UYVY }, |
| { OV9640_COM16, OV9640_COM16_RB_AVG }, |
| |
| /* Gamma curve P */ |
| { 0x6c, 0x40 }, { 0x6d, 0x30 }, { 0x6e, 0x4b }, { 0x6f, 0x60 }, |
| { 0x70, 0x70 }, { 0x71, 0x70 }, { 0x72, 0x70 }, { 0x73, 0x70 }, |
| { 0x74, 0x60 }, { 0x75, 0x60 }, { 0x76, 0x50 }, { 0x77, 0x48 }, |
| { 0x78, 0x3a }, { 0x79, 0x2e }, { 0x7a, 0x28 }, { 0x7b, 0x22 }, |
| |
| /* Gamma curve T */ |
| { 0x7c, 0x04 }, { 0x7d, 0x07 }, { 0x7e, 0x10 }, { 0x7f, 0x28 }, |
| { 0x80, 0x36 }, { 0x81, 0x44 }, { 0x82, 0x52 }, { 0x83, 0x60 }, |
| { 0x84, 0x6c }, { 0x85, 0x78 }, { 0x86, 0x8c }, { 0x87, 0x9e }, |
| { 0x88, 0xbb }, { 0x89, 0xd2 }, { 0x8a, 0xe6 }, |
| }; |
| |
| /* Configurations |
| * NOTE: for YUV, alter the following registers: |
| * COM12 |= OV9640_COM12_YUV_AVG |
| * |
| * for RGB, alter the following registers: |
| * COM7 |= OV9640_COM7_RGB |
| * COM13 |= OV9640_COM13_RGB_AVG |
| * COM15 |= proper RGB color encoding mode |
| */ |
| static const struct ov9640_reg ov9640_regs_qqcif[] = { |
| { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x0f) }, |
| { OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP }, |
| { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD }, |
| { OV9640_COM7, OV9640_COM7_QCIF }, |
| { OV9640_COM12, OV9640_COM12_RSVD }, |
| { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, |
| { OV9640_COM15, OV9640_COM15_OR_10F0 }, |
| }; |
| |
| static const struct ov9640_reg ov9640_regs_qqvga[] = { |
| { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) }, |
| { OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP }, |
| { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD }, |
| { OV9640_COM7, OV9640_COM7_QVGA }, |
| { OV9640_COM12, OV9640_COM12_RSVD }, |
| { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, |
| { OV9640_COM15, OV9640_COM15_OR_10F0 }, |
| }; |
| |
| static const struct ov9640_reg ov9640_regs_qcif[] = { |
| { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) }, |
| { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD }, |
| { OV9640_COM7, OV9640_COM7_QCIF }, |
| { OV9640_COM12, OV9640_COM12_RSVD }, |
| { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, |
| { OV9640_COM15, OV9640_COM15_OR_10F0 }, |
| }; |
| |
| static const struct ov9640_reg ov9640_regs_qvga[] = { |
| { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) }, |
| { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD }, |
| { OV9640_COM7, OV9640_COM7_QVGA }, |
| { OV9640_COM12, OV9640_COM12_RSVD }, |
| { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, |
| { OV9640_COM15, OV9640_COM15_OR_10F0 }, |
| }; |
| |
| static const struct ov9640_reg ov9640_regs_cif[] = { |
| { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) }, |
| { OV9640_COM3, OV9640_COM3_VP }, |
| { OV9640_COM7, OV9640_COM7_CIF }, |
| { OV9640_COM12, OV9640_COM12_RSVD }, |
| { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, |
| { OV9640_COM15, OV9640_COM15_OR_10F0 }, |
| }; |
| |
| static const struct ov9640_reg ov9640_regs_vga[] = { |
| { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) }, |
| { OV9640_COM3, OV9640_COM3_VP }, |
| { OV9640_COM7, OV9640_COM7_VGA }, |
| { OV9640_COM12, OV9640_COM12_RSVD }, |
| { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, |
| { OV9640_COM15, OV9640_COM15_OR_10F0 }, |
| }; |
| |
| static const struct ov9640_reg ov9640_regs_sxga[] = { |
| { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) }, |
| { OV9640_COM3, OV9640_COM3_VP }, |
| { OV9640_COM7, 0 }, |
| { OV9640_COM12, OV9640_COM12_RSVD }, |
| { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN }, |
| { OV9640_COM15, OV9640_COM15_OR_10F0 }, |
| }; |
| |
| static const struct ov9640_reg ov9640_regs_yuv[] = { |
| { OV9640_MTX1, 0x58 }, |
| { OV9640_MTX2, 0x48 }, |
| { OV9640_MTX3, 0x10 }, |
| { OV9640_MTX4, 0x28 }, |
| { OV9640_MTX5, 0x48 }, |
| { OV9640_MTX6, 0x70 }, |
| { OV9640_MTX7, 0x40 }, |
| { OV9640_MTX8, 0x40 }, |
| { OV9640_MTX9, 0x40 }, |
| { OV9640_MTXS, 0x0f }, |
| }; |
| |
| static const struct ov9640_reg ov9640_regs_rgb[] = { |
| { OV9640_MTX1, 0x71 }, |
| { OV9640_MTX2, 0x3e }, |
| { OV9640_MTX3, 0x0c }, |
| { OV9640_MTX4, 0x33 }, |
| { OV9640_MTX5, 0x72 }, |
| { OV9640_MTX6, 0x00 }, |
| { OV9640_MTX7, 0x2b }, |
| { OV9640_MTX8, 0x66 }, |
| { OV9640_MTX9, 0xd2 }, |
| { OV9640_MTXS, 0x65 }, |
| }; |
| |
| /* |
| * TODO: this sensor also supports RGB555 and RGB565 formats, but support for |
| * them has not yet been sufficiently tested and so it is not included with |
| * this version of the driver. To test and debug these formats add two entries |
| * to the below array, see ov722x.c for an example. |
| */ |
| static const struct soc_camera_data_format ov9640_fmt_lists[] = { |
| { |
| .name = "UYVY", |
| .fourcc = V4L2_PIX_FMT_UYVY, |
| .depth = 16, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| }, |
| }; |
| |
| static const struct v4l2_queryctrl ov9640_controls[] = { |
| { |
| .id = V4L2_CID_VFLIP, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Flip Vertically", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 0, |
| }, |
| { |
| .id = V4L2_CID_HFLIP, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Flip Horizontally", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 0, |
| }, |
| }; |
| |
| /* read a register */ |
| static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val) |
| { |
| int ret; |
| u8 data = reg; |
| struct i2c_msg msg = { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = &data, |
| }; |
| |
| ret = i2c_transfer(client->adapter, &msg, 1); |
| if (ret < 0) |
| goto err; |
| |
| msg.flags = I2C_M_RD; |
| ret = i2c_transfer(client->adapter, &msg, 1); |
| if (ret < 0) |
| goto err; |
| |
| *val = data; |
| return 0; |
| |
| err: |
| dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg); |
| return ret; |
| } |
| |
| /* write a register */ |
| static int ov9640_reg_write(struct i2c_client *client, u8 reg, u8 val) |
| { |
| int ret; |
| u8 _val; |
| unsigned char data[2] = { reg, val }; |
| struct i2c_msg msg = { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 2, |
| .buf = data, |
| }; |
| |
| ret = i2c_transfer(client->adapter, &msg, 1); |
| if (ret < 0) { |
| dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg); |
| return ret; |
| } |
| |
| /* we have to read the register back ... no idea why, maybe HW bug */ |
| ret = ov9640_reg_read(client, reg, &_val); |
| if (ret) |
| dev_err(&client->dev, |
| "Failed reading back register 0x%02x!\n", reg); |
| |
| return 0; |
| } |
| |
| |
| /* Read a register, alter its bits, write it back */ |
| static int ov9640_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 unset) |
| { |
| u8 val; |
| int ret; |
| |
| ret = ov9640_reg_read(client, reg, &val); |
| if (ret) { |
| dev_err(&client->dev, |
| "[Read]-Modify-Write of register %02x failed!\n", reg); |
| return val; |
| } |
| |
| val |= set; |
| val &= ~unset; |
| |
| ret = ov9640_reg_write(client, reg, val); |
| if (ret) |
| dev_err(&client->dev, |
| "Read-Modify-[Write] of register %02x failed!\n", reg); |
| |
| return ret; |
| } |
| |
| /* Soft reset the camera. This has nothing to do with the RESET pin! */ |
| static int ov9640_reset(struct i2c_client *client) |
| { |
| int ret; |
| |
| ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET); |
| if (ret) |
| dev_err(&client->dev, |
| "An error occured while entering soft reset!\n"); |
| |
| return ret; |
| } |
| |
| /* Start/Stop streaming from the device */ |
| static int ov9640_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| return 0; |
| } |
| |
| /* Alter bus settings on camera side */ |
| static int ov9640_set_bus_param(struct soc_camera_device *icd, |
| unsigned long flags) |
| { |
| return 0; |
| } |
| |
| /* Request bus settings on camera side */ |
| static unsigned long ov9640_query_bus_param(struct soc_camera_device *icd) |
| { |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| |
| /* |
| * REVISIT: the camera probably can do 10 bit transfers, but I don't |
| * have those pins connected on my hardware. |
| */ |
| unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER | |
| SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH | |
| SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8; |
| |
| return soc_camera_apply_sensor_flags(icl, flags); |
| } |
| |
| /* Get status of additional camera capabilities */ |
| static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| struct i2c_client *client = sd->priv; |
| struct ov9640_priv *priv = container_of(i2c_get_clientdata(client), |
| struct ov9640_priv, subdev); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_VFLIP: |
| ctrl->value = priv->flag_vflip; |
| break; |
| case V4L2_CID_HFLIP: |
| ctrl->value = priv->flag_hflip; |
| break; |
| } |
| return 0; |
| } |
| |
| /* Set status of additional camera capabilities */ |
| static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| struct i2c_client *client = sd->priv; |
| struct ov9640_priv *priv = container_of(i2c_get_clientdata(client), |
| struct ov9640_priv, subdev); |
| |
| int ret = 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_VFLIP: |
| priv->flag_vflip = ctrl->value; |
| if (ctrl->value) |
| ret = ov9640_reg_rmw(client, OV9640_MVFP, |
| OV9640_MVFP_V, 0); |
| else |
| ret = ov9640_reg_rmw(client, OV9640_MVFP, |
| 0, OV9640_MVFP_V); |
| break; |
| case V4L2_CID_HFLIP: |
| priv->flag_hflip = ctrl->value; |
| if (ctrl->value) |
| ret = ov9640_reg_rmw(client, OV9640_MVFP, |
| OV9640_MVFP_H, 0); |
| else |
| ret = ov9640_reg_rmw(client, OV9640_MVFP, |
| 0, OV9640_MVFP_H); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* Get chip identification */ |
| static int ov9640_g_chip_ident(struct v4l2_subdev *sd, |
| struct v4l2_dbg_chip_ident *id) |
| { |
| struct i2c_client *client = sd->priv; |
| struct ov9640_priv *priv = container_of(i2c_get_clientdata(client), |
| struct ov9640_priv, subdev); |
| |
| id->ident = priv->model; |
| id->revision = priv->revision; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int ov9640_get_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = sd->priv; |
| int ret; |
| u8 val; |
| |
| if (reg->reg & ~0xff) |
| return -EINVAL; |
| |
| reg->size = 1; |
| |
| ret = ov9640_reg_read(client, reg->reg, &val); |
| if (ret) |
| return ret; |
| |
| reg->val = (__u64)val; |
| |
| return 0; |
| } |
| |
| static int ov9640_set_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = sd->priv; |
| |
| if (reg->reg & ~0xff || reg->val & ~0xff) |
| return -EINVAL; |
| |
| return ov9640_reg_write(client, reg->reg, reg->val); |
| } |
| #endif |
| |
| /* select nearest higher resolution for capture */ |
| static void ov9640_res_roundup(u32 *width, u32 *height) |
| { |
| int i; |
| enum { QQCIF, QQVGA, QCIF, QVGA, CIF, VGA, SXGA }; |
| int res_x[] = { 88, 160, 176, 320, 352, 640, 1280 }; |
| int res_y[] = { 72, 120, 144, 240, 288, 480, 960 }; |
| |
| for (i = 0; i < ARRAY_SIZE(res_x); i++) { |
| if (res_x[i] >= *width && res_y[i] >= *height) { |
| *width = res_x[i]; |
| *height = res_y[i]; |
| return; |
| } |
| } |
| |
| *width = res_x[SXGA]; |
| *height = res_y[SXGA]; |
| } |
| |
| /* Prepare necessary register changes depending on color encoding */ |
| static void ov9640_alter_regs(u32 pixfmt, struct ov9640_reg_alt *alt) |
| { |
| switch (pixfmt) { |
| case V4L2_PIX_FMT_UYVY: |
| alt->com12 = OV9640_COM12_YUV_AVG; |
| alt->com13 = OV9640_COM13_Y_DELAY_EN | |
| OV9640_COM13_YUV_DLY(0x01); |
| break; |
| case V4L2_PIX_FMT_RGB555: |
| alt->com7 = OV9640_COM7_RGB; |
| alt->com13 = OV9640_COM13_RGB_AVG; |
| alt->com15 = OV9640_COM15_RGB_555; |
| break; |
| case V4L2_PIX_FMT_RGB565: |
| alt->com7 = OV9640_COM7_RGB; |
| alt->com13 = OV9640_COM13_RGB_AVG; |
| alt->com15 = OV9640_COM15_RGB_565; |
| break; |
| }; |
| } |
| |
| /* Setup registers according to resolution and color encoding */ |
| static int ov9640_write_regs(struct i2c_client *client, |
| u32 width, u32 pixfmt, struct ov9640_reg_alt *alts) |
| { |
| const struct ov9640_reg *ov9640_regs, *matrix_regs; |
| int ov9640_regs_len, matrix_regs_len; |
| int i, ret; |
| u8 val; |
| |
| /* select register configuration for given resolution */ |
| switch (width) { |
| case W_QQCIF: |
| ov9640_regs = ov9640_regs_qqcif; |
| ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqcif); |
| break; |
| case W_QQVGA: |
| ov9640_regs = ov9640_regs_qqvga; |
| ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqvga); |
| break; |
| case W_QCIF: |
| ov9640_regs = ov9640_regs_qcif; |
| ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qcif); |
| break; |
| case W_QVGA: |
| ov9640_regs = ov9640_regs_qvga; |
| ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qvga); |
| break; |
| case W_CIF: |
| ov9640_regs = ov9640_regs_cif; |
| ov9640_regs_len = ARRAY_SIZE(ov9640_regs_cif); |
| break; |
| case W_VGA: |
| ov9640_regs = ov9640_regs_vga; |
| ov9640_regs_len = ARRAY_SIZE(ov9640_regs_vga); |
| break; |
| case W_SXGA: |
| ov9640_regs = ov9640_regs_sxga; |
| ov9640_regs_len = ARRAY_SIZE(ov9640_regs_sxga); |
| break; |
| default: |
| dev_err(&client->dev, "Failed to select resolution!\n"); |
| return -EINVAL; |
| } |
| |
| /* select color matrix configuration for given color encoding */ |
| if (pixfmt == V4L2_PIX_FMT_UYVY) { |
| matrix_regs = ov9640_regs_yuv; |
| matrix_regs_len = ARRAY_SIZE(ov9640_regs_yuv); |
| } else { |
| matrix_regs = ov9640_regs_rgb; |
| matrix_regs_len = ARRAY_SIZE(ov9640_regs_rgb); |
| } |
| |
| /* write register settings into the module */ |
| for (i = 0; i < ov9640_regs_len; i++) { |
| val = ov9640_regs[i].val; |
| |
| switch (ov9640_regs[i].reg) { |
| case OV9640_COM7: |
| val |= alts->com7; |
| break; |
| case OV9640_COM12: |
| val |= alts->com12; |
| break; |
| case OV9640_COM13: |
| val |= alts->com13; |
| break; |
| case OV9640_COM15: |
| val |= alts->com15; |
| break; |
| } |
| |
| ret = ov9640_reg_write(client, ov9640_regs[i].reg, val); |
| if (ret) |
| return ret; |
| } |
| |
| /* write color matrix configuration into the module */ |
| for (i = 0; i < matrix_regs_len; i++) { |
| ret = ov9640_reg_write(client, matrix_regs[i].reg, |
| matrix_regs[i].val); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* program default register values */ |
| static int ov9640_prog_dflt(struct i2c_client *client) |
| { |
| int i, ret; |
| |
| for (i = 0; i < ARRAY_SIZE(ov9640_regs_dflt); i++) { |
| ret = ov9640_reg_write(client, ov9640_regs_dflt[i].reg, |
| ov9640_regs_dflt[i].val); |
| if (ret) |
| return ret; |
| } |
| |
| /* wait for the changes to actually happen, 140ms are not enough yet */ |
| mdelay(150); |
| |
| return 0; |
| } |
| |
| /* set the format we will capture in */ |
| static int ov9640_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) |
| { |
| struct i2c_client *client = sd->priv; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| struct ov9640_reg_alt alts = {0}; |
| int ret; |
| |
| ov9640_res_roundup(&pix->width, &pix->height); |
| ov9640_alter_regs(pix->pixelformat, &alts); |
| |
| ov9640_reset(client); |
| |
| ret = ov9640_prog_dflt(client); |
| if (ret) |
| return ret; |
| |
| return ov9640_write_regs(client, pix->width, pix->pixelformat, &alts); |
| } |
| |
| static int ov9640_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) |
| { |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| |
| ov9640_res_roundup(&pix->width, &pix->height); |
| pix->field = V4L2_FIELD_NONE; |
| |
| return 0; |
| } |
| |
| static int ov9640_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) |
| { |
| a->c.left = 0; |
| a->c.top = 0; |
| a->c.width = W_SXGA; |
| a->c.height = H_SXGA; |
| a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| return 0; |
| } |
| |
| static int ov9640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) |
| { |
| a->bounds.left = 0; |
| a->bounds.top = 0; |
| a->bounds.width = W_SXGA; |
| a->bounds.height = H_SXGA; |
| a->defrect = a->bounds; |
| a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| a->pixelaspect.numerator = 1; |
| a->pixelaspect.denominator = 1; |
| |
| return 0; |
| } |
| |
| |
| |
| static int ov9640_video_probe(struct soc_camera_device *icd, |
| struct i2c_client *client) |
| { |
| struct ov9640_priv *priv = i2c_get_clientdata(client); |
| u8 pid, ver, midh, midl; |
| const char *devname; |
| int ret = 0; |
| |
| /* |
| * We must have a parent by now. And it cannot be a wrong one. |
| * So this entire test is completely redundant. |
| */ |
| if (!icd->dev.parent || |
| to_soc_camera_host(icd->dev.parent)->nr != icd->iface) { |
| dev_err(&client->dev, "Parent missing or invalid!\n"); |
| ret = -ENODEV; |
| goto err; |
| } |
| |
| icd->formats = ov9640_fmt_lists; |
| icd->num_formats = ARRAY_SIZE(ov9640_fmt_lists); |
| |
| /* |
| * check and show product ID and manufacturer ID |
| */ |
| |
| ret = ov9640_reg_read(client, OV9640_PID, &pid); |
| if (ret) |
| goto err; |
| |
| ret = ov9640_reg_read(client, OV9640_VER, &ver); |
| if (ret) |
| goto err; |
| |
| ret = ov9640_reg_read(client, OV9640_MIDH, &midh); |
| if (ret) |
| goto err; |
| |
| ret = ov9640_reg_read(client, OV9640_MIDL, &midl); |
| if (ret) |
| goto err; |
| |
| switch (VERSION(pid, ver)) { |
| case OV9640_V2: |
| devname = "ov9640"; |
| priv->model = V4L2_IDENT_OV9640; |
| priv->revision = 2; |
| case OV9640_V3: |
| devname = "ov9640"; |
| priv->model = V4L2_IDENT_OV9640; |
| priv->revision = 3; |
| break; |
| default: |
| dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver); |
| ret = -ENODEV; |
| goto err; |
| } |
| |
| dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n", |
| devname, pid, ver, midh, midl); |
| |
| err: |
| return ret; |
| } |
| |
| static struct soc_camera_ops ov9640_ops = { |
| .set_bus_param = ov9640_set_bus_param, |
| .query_bus_param = ov9640_query_bus_param, |
| .controls = ov9640_controls, |
| .num_controls = ARRAY_SIZE(ov9640_controls), |
| }; |
| |
| static struct v4l2_subdev_core_ops ov9640_core_ops = { |
| .g_ctrl = ov9640_g_ctrl, |
| .s_ctrl = ov9640_s_ctrl, |
| .g_chip_ident = ov9640_g_chip_ident, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = ov9640_get_register, |
| .s_register = ov9640_set_register, |
| #endif |
| |
| }; |
| |
| static struct v4l2_subdev_video_ops ov9640_video_ops = { |
| .s_stream = ov9640_s_stream, |
| .s_fmt = ov9640_s_fmt, |
| .try_fmt = ov9640_try_fmt, |
| .cropcap = ov9640_cropcap, |
| .g_crop = ov9640_g_crop, |
| |
| }; |
| |
| static struct v4l2_subdev_ops ov9640_subdev_ops = { |
| .core = &ov9640_core_ops, |
| .video = &ov9640_video_ops, |
| }; |
| |
| /* |
| * i2c_driver function |
| */ |
| static int ov9640_probe(struct i2c_client *client, |
| const struct i2c_device_id *did) |
| { |
| struct ov9640_priv *priv; |
| struct soc_camera_device *icd = client->dev.platform_data; |
| struct soc_camera_link *icl; |
| int ret; |
| |
| if (!icd) { |
| dev_err(&client->dev, "Missing soc-camera data!\n"); |
| return -EINVAL; |
| } |
| |
| icl = to_soc_camera_link(icd); |
| if (!icl) { |
| dev_err(&client->dev, "Missing platform_data for driver\n"); |
| return -EINVAL; |
| } |
| |
| priv = kzalloc(sizeof(struct ov9640_priv), GFP_KERNEL); |
| if (!priv) { |
| dev_err(&client->dev, |
| "Failed to allocate memory for private data!\n"); |
| return -ENOMEM; |
| } |
| |
| v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops); |
| |
| icd->ops = &ov9640_ops; |
| |
| ret = ov9640_video_probe(icd, client); |
| |
| if (ret) { |
| icd->ops = NULL; |
| i2c_set_clientdata(client, NULL); |
| kfree(priv); |
| } |
| |
| return ret; |
| } |
| |
| static int ov9640_remove(struct i2c_client *client) |
| { |
| struct ov9640_priv *priv = i2c_get_clientdata(client); |
| |
| i2c_set_clientdata(client, NULL); |
| kfree(priv); |
| return 0; |
| } |
| |
| static const struct i2c_device_id ov9640_id[] = { |
| { "ov9640", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ov9640_id); |
| |
| static struct i2c_driver ov9640_i2c_driver = { |
| .driver = { |
| .name = "ov9640", |
| }, |
| .probe = ov9640_probe, |
| .remove = ov9640_remove, |
| .id_table = ov9640_id, |
| }; |
| |
| static int __init ov9640_module_init(void) |
| { |
| return i2c_add_driver(&ov9640_i2c_driver); |
| } |
| |
| static void __exit ov9640_module_exit(void) |
| { |
| i2c_del_driver(&ov9640_i2c_driver); |
| } |
| |
| module_init(ov9640_module_init); |
| module_exit(ov9640_module_exit); |
| |
| MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV96xx"); |
| MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); |
| MODULE_LICENSE("GPL v2"); |