Merge remote-tracking branches 'regulator/topic/ltc3589', 'regulator/topic/max77620', 'regulator/topic/max77686', 'regulator/topic/max77802' and 'regulator/topic/maxim' into regulator-next
diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
new file mode 100644
index 0000000..b3c8ca6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
@@ -0,0 +1,200 @@
+Regulator DT binding for MAX77620 Power management IC from Maxim Semiconductor.
+
+Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The input supply
+of these regulators are defined under parent device node.
+Details of regulator properties are defined as child node under
+sub-node "regulators" which is child node of device node.
+
+Please refer file <Documentation/devicetree/bindings/regulator/regulator.txt>
+for common regulator bindings used by client.
+
+Following are properties of parent node related to regulators.
+
+Optional properties:
+-------------------
+The input supply of regulators are the optional properties on the
+parent device node. The input supply of these regulators are provided
+through following properties:
+in-sd0-supply:		Input supply for SD0, INA-SD0 or INB-SD0 pins.
+in-sd1-supply:		Input supply for SD1.
+in-sd2-supply:		Input supply for SD2.
+in-sd3-supply:		Input supply for SD3.
+in-ldo0-1-supply:	Input supply for LDO0 and LDO1.
+in-ldo2-supply:		Input supply for LDO2.
+in-ldo3-5-supply:	Input supply for LDO3 and LDO5
+in-ldo4-6-supply:	Input supply for LDO4 and LDO6.
+in-ldo7-8-supply:	Input supply for LDO7 and LDO8.
+
+Optional sub nodes for regulators under "regulators" subnode:
+------------------------------------------------------------
+The subnodes name is the name of regulator and it must be one of:
+	sd[0-3], ldo[0-8]
+
+Each sub-node should contain the constraints and initialization
+information for that regulator. The definition for each of these
+nodes is defined using the standard binding for regulators found at
+<Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Theres are also additional properties for SD/LDOs. These additional properties
+are required to configure FPS configuration parameters for SDs and LDOs.
+Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible
+Power Sequence (FPS).
+Following are additional properties:
+
+- maxim,active-fps-source:		FPS source for the regulators to get
+					enabled/disabled when system is in
+					active state.  Valid values are:
+					- MAX77620_FPS_SRC_0,
+						FPS source is FPS0.
+					- MAX77620_FPS_SRC_1,
+						FPS source is FPS1
+					- MAX77620_FPS_SRC_2 and
+						FPS source is FPS2
+					- MAX77620_FPS_SRC_NONE.
+						Regulator is not controlled
+						by FPS events and it gets
+						enabled/disabled by register
+						access.
+					Absence of this property will leave
+					the FPS configuration register for that
+					regulator to default configuration.
+
+- maxim,active-fps-power-up-slot:	Sequencing event slot number on which
+					the regulator get enabled when
+					master FPS input event set to HIGH.
+					Valid values are 0 to 7.
+					This is applicable if FPS source is
+					selected as FPS0, FPS1 or FPS2.
+			
+- maxim,active-fps-power-down-slot:	Sequencing event slot number on which
+					the regulator get disabled when master
+					FPS input event set to LOW.
+					Valid values are 0 to 7.
+					This is applicable if FPS source is
+					selected as FPS0, FPS1 or FPS2.
+			
+- maxim,suspend-fps-source:		This is same as property
+					"maxim,active-fps-source" but value
+					get configured when system enters in
+					to suspend state.
+
+- maxim,suspend-fps-power-up-slot:	This is same as property
+					"maxim,active-fps-power-up-slot" but
+					this value get configured into FPS
+					configuration register when system
+					enters into suspend.
+					This is applicable if suspend state
+					FPS source is selected as FPS0, FPS1 or
+
+- maxim,suspend-fps-power-down-slot:	This is same as property
+					"maxim,active-fps-power-down-slot" but
+					this value get configured into FPS
+					configuration register when system
+					enters into suspend.
+					This is applicable if suspend state
+					FPS source is selected as FPS0, FPS1 or
+					FPS2.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+...
+max77620@3c {
+	in-ldo0-1-supply = <&max77620_sd2>;
+	in-ldo7-8-supply = <&max77620_sd2>;
+	regulators {
+		sd0 {
+			regulator-name = "vdd-core";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+		};
+
+		sd1 {
+			regulator-name = "vddio-ddr";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-boot-on;
+			maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+		};
+
+		sd2 {
+			regulator-name = "vdd-pre-reg";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		sd3 {
+			regulator-name = "vdd-1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo0 {
+			regulator-name = "avdd-sys";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo1 {
+			regulator-name = "vdd-pex";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		ldo2 {
+			regulator-name = "vddio-sdmmc3";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		ldo3 {
+			regulator-name = "vdd-cam-hv";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		ldo4 {
+			regulator-name = "vdd-rtc";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo5 {
+			regulator-name = "avdd-ts-hv";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		ldo6 {
+			regulator-name = "vdd-ts";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo7 {
+			regulator-name = "vdd-gen-pll-edp";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo8 {
+			regulator-name = "vdd-hdmi-dp";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index f5e6a53..a915a32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6899,7 +6899,7 @@
 M:	Javier Martinez Canillas <javier@osg.samsung.com>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	drivers/*/*max77802.c
+F:	drivers/*/*max77802*.c
 F:	Documentation/devicetree/bindings/*/*max77802.txt
 F:	include/dt-bindings/*/*max77802.h
 
@@ -6909,7 +6909,7 @@
 L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/*/max14577.c
-F:	drivers/*/max77686.c
+F:	drivers/*/max77686*.c
 F:	drivers/*/max77693.c
 F:	drivers/extcon/extcon-max14577.c
 F:	drivers/extcon/extcon-max77693.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 39b422b9..91040ec 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -360,6 +360,15 @@
 	  regulator via I2C bus. The provided regulator is suitable
 	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 
+config REGULATOR_MAX77620
+	tristate "Maxim 77620/MAX20024 voltage regulator"
+	depends on MFD_MAX77620
+	help
+	  This driver controls Maxim MAX77620 voltage output regulator
+	  via I2C bus. The provided regulator is suitable for Tegra
+	  chip to control Step-Down DC-DC and LDOs. Say Y here to
+	  enable the regulator driver.
+
 config REGULATOR_MAX8649
 	tristate "Maxim 8649 voltage regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bba7b70..a78d8bf 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -48,6 +48,7 @@
 obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
 obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
+obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
 obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
@@ -56,9 +57,9 @@
 obj-$(CONFIG_REGULATOR_MAX8973) += max8973-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
 obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
-obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
+obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o
-obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
+obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 1cff112..e0b7642 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1150,6 +1150,17 @@
 		}
 	}
 
+	if (rdev->constraints->active_discharge && ops->set_active_discharge) {
+		bool ad_state = (rdev->constraints->active_discharge ==
+			      REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false;
+
+		ret = ops->set_active_discharge(rdev, ad_state);
+		if (ret < 0) {
+			rdev_err(rdev, "failed to set active discharge\n");
+			return ret;
+		}
+	}
+
 	print_constraints(rdev);
 	return 0;
 }
diff --git a/drivers/regulator/ltc3589.c b/drivers/regulator/ltc3589.c
index 972c386..47bef32 100644
--- a/drivers/regulator/ltc3589.c
+++ b/drivers/regulator/ltc3589.c
@@ -520,12 +520,15 @@
 		}
 	}
 
-	ret = devm_request_threaded_irq(dev, client->irq, NULL, ltc3589_isr,
-					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-					client->name, ltc3589);
-	if (ret) {
-		dev_err(dev, "Failed to request IRQ: %d\n", ret);
-		return ret;
+	if (client->irq) {
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						ltc3589_isr,
+						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						client->name, ltc3589);
+		if (ret) {
+			dev_err(dev, "Failed to request IRQ: %d\n", ret);
+			return ret;
+		}
 	}
 
 	return 0;
diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
new file mode 100644
index 0000000..73a3356
--- /dev/null
+++ b/drivers/regulator/max77620-regulator.c
@@ -0,0 +1,813 @@
+/*
+ * Maxim MAX77620 Regulator driver
+ *
+ * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author: Mallikarjun Kasoju <mkasoju@nvidia.com>
+ *	Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/mfd/max77620.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#define max77620_rails(_name)	"max77620-"#_name
+
+/* Power Mode */
+#define MAX77620_POWER_MODE_NORMAL		3
+#define MAX77620_POWER_MODE_LPM			2
+#define MAX77620_POWER_MODE_GLPM		1
+#define MAX77620_POWER_MODE_DISABLE		0
+
+/* SD Slew Rate */
+#define MAX77620_SD_SR_13_75			0
+#define MAX77620_SD_SR_27_5			1
+#define MAX77620_SD_SR_55			2
+#define MAX77620_SD_SR_100			3
+
+enum max77620_regulators {
+	MAX77620_REGULATOR_ID_SD0,
+	MAX77620_REGULATOR_ID_SD1,
+	MAX77620_REGULATOR_ID_SD2,
+	MAX77620_REGULATOR_ID_SD3,
+	MAX77620_REGULATOR_ID_SD4,
+	MAX77620_REGULATOR_ID_LDO0,
+	MAX77620_REGULATOR_ID_LDO1,
+	MAX77620_REGULATOR_ID_LDO2,
+	MAX77620_REGULATOR_ID_LDO3,
+	MAX77620_REGULATOR_ID_LDO4,
+	MAX77620_REGULATOR_ID_LDO5,
+	MAX77620_REGULATOR_ID_LDO6,
+	MAX77620_REGULATOR_ID_LDO7,
+	MAX77620_REGULATOR_ID_LDO8,
+	MAX77620_NUM_REGS,
+};
+
+/* Regulator types */
+enum max77620_regulator_type {
+	MAX77620_REGULATOR_TYPE_SD,
+	MAX77620_REGULATOR_TYPE_LDO_N,
+	MAX77620_REGULATOR_TYPE_LDO_P,
+};
+
+struct max77620_regulator_info {
+	u8 type;
+	u8 fps_addr;
+	u8 volt_addr;
+	u8 cfg_addr;
+	u8 power_mode_mask;
+	u8 power_mode_shift;
+	u8 remote_sense_addr;
+	u8 remote_sense_mask;
+	struct regulator_desc desc;
+};
+
+struct max77620_regulator_pdata {
+	struct regulator_init_data *reg_idata;
+	int active_fps_src;
+	int active_fps_pd_slot;
+	int active_fps_pu_slot;
+	int suspend_fps_src;
+	int suspend_fps_pd_slot;
+	int suspend_fps_pu_slot;
+	int current_mode;
+};
+
+struct max77620_regulator {
+	struct device *dev;
+	struct regmap *rmap;
+	struct max77620_regulator_info *rinfo[MAX77620_NUM_REGS];
+	struct max77620_regulator_pdata reg_pdata[MAX77620_NUM_REGS];
+	int enable_power_mode[MAX77620_NUM_REGS];
+	int current_power_mode[MAX77620_NUM_REGS];
+	int active_fps_src[MAX77620_NUM_REGS];
+};
+
+#define fps_src_name(fps_src)	\
+	(fps_src == MAX77620_FPS_SRC_0 ? "FPS_SRC_0" :	\
+	fps_src == MAX77620_FPS_SRC_1 ? "FPS_SRC_1" :	\
+	fps_src == MAX77620_FPS_SRC_2 ? "FPS_SRC_2" : "FPS_SRC_NONE")
+
+static int max77620_regulator_get_fps_src(struct max77620_regulator *pmic,
+					  int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(pmic->rmap, rinfo->fps_addr, &val);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Reg 0x%02x read failed %d\n",
+			rinfo->fps_addr, ret);
+		return ret;
+	}
+
+	return (val & MAX77620_FPS_SRC_MASK) >> MAX77620_FPS_SRC_SHIFT;
+}
+
+static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic,
+					  int fps_src, int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	unsigned int val;
+	int ret;
+
+	switch (fps_src) {
+	case MAX77620_FPS_SRC_0:
+	case MAX77620_FPS_SRC_1:
+	case MAX77620_FPS_SRC_2:
+	case MAX77620_FPS_SRC_NONE:
+		break;
+
+	case MAX77620_FPS_SRC_DEF:
+		ret = regmap_read(pmic->rmap, rinfo->fps_addr, &val);
+		if (ret < 0) {
+			dev_err(pmic->dev, "Reg 0x%02x read failed %d\n",
+				rinfo->fps_addr, ret);
+			return ret;
+		}
+		ret = (val & MAX77620_FPS_SRC_MASK) >> MAX77620_FPS_SRC_SHIFT;
+		pmic->active_fps_src[id] = ret;
+		return 0;
+
+	default:
+		dev_err(pmic->dev, "Invalid FPS %d for regulator %d\n",
+			fps_src, id);
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(pmic->rmap, rinfo->fps_addr,
+				 MAX77620_FPS_SRC_MASK,
+				 fps_src << MAX77620_FPS_SRC_SHIFT);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Reg 0x%02x update failed %d\n",
+			rinfo->fps_addr, ret);
+		return ret;
+	}
+	pmic->active_fps_src[id] = fps_src;
+
+	return 0;
+}
+
+static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic,
+					    int id, bool is_suspend)
+{
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	unsigned int val = 0;
+	unsigned int mask = 0;
+	int pu = rpdata->active_fps_pu_slot;
+	int pd = rpdata->active_fps_pd_slot;
+	int ret = 0;
+
+	if (is_suspend) {
+		pu = rpdata->suspend_fps_pu_slot;
+		pd = rpdata->suspend_fps_pd_slot;
+	}
+
+	/* FPS power up period setting */
+	if (pu >= 0) {
+		val |= (pu << MAX77620_FPS_PU_PERIOD_SHIFT);
+		mask |= MAX77620_FPS_PU_PERIOD_MASK;
+	}
+
+	/* FPS power down period setting */
+	if (pd >= 0) {
+		val |= (pd << MAX77620_FPS_PD_PERIOD_SHIFT);
+		mask |= MAX77620_FPS_PD_PERIOD_MASK;
+	}
+
+	if (mask) {
+		ret = regmap_update_bits(pmic->rmap, rinfo->fps_addr,
+					 mask, val);
+		if (ret < 0) {
+			dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n",
+				rinfo->fps_addr, ret);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int max77620_regulator_set_power_mode(struct max77620_regulator *pmic,
+					     int power_mode, int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	u8 mask = rinfo->power_mode_mask;
+	u8 shift = rinfo->power_mode_shift;
+	u8 addr;
+	int ret;
+
+	switch (rinfo->type) {
+	case MAX77620_REGULATOR_TYPE_SD:
+		addr = rinfo->cfg_addr;
+		break;
+	default:
+		addr = rinfo->volt_addr;
+		break;
+	}
+
+	ret = regmap_update_bits(pmic->rmap, addr, mask, power_mode << shift);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Regulator %d mode set failed: %d\n",
+			id, ret);
+		return ret;
+	}
+	pmic->current_power_mode[id] = power_mode;
+
+	return ret;
+}
+
+static int max77620_regulator_get_power_mode(struct max77620_regulator *pmic,
+					     int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	unsigned int val, addr;
+	u8 mask = rinfo->power_mode_mask;
+	u8 shift = rinfo->power_mode_shift;
+	int ret;
+
+	switch (rinfo->type) {
+	case MAX77620_REGULATOR_TYPE_SD:
+		addr = rinfo->cfg_addr;
+		break;
+	default:
+		addr = rinfo->volt_addr;
+		break;
+	}
+
+	ret = regmap_read(pmic->rmap, addr, &val);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Regulator %d: Reg 0x%02x read failed: %d\n",
+			id, addr, ret);
+		return ret;
+	}
+
+	return (val & mask) >> shift;
+}
+
+static int max77620_read_slew_rate(struct max77620_regulator *pmic, int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	unsigned int rval;
+	int slew_rate;
+	int ret;
+
+	ret = regmap_read(pmic->rmap, rinfo->cfg_addr, &rval);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Register 0x%02x read failed: %d\n",
+			rinfo->cfg_addr, ret);
+		return ret;
+	}
+
+	switch (rinfo->type) {
+	case MAX77620_REGULATOR_TYPE_SD:
+		slew_rate = (rval >> MAX77620_SD_SR_SHIFT) & 0x3;
+		switch (slew_rate) {
+		case 0:
+			slew_rate = 13750;
+			break;
+		case 1:
+			slew_rate = 27500;
+			break;
+		case 2:
+			slew_rate = 55000;
+			break;
+		case 3:
+			slew_rate = 100000;
+			break;
+		}
+		rinfo->desc.ramp_delay = slew_rate;
+		break;
+	default:
+		slew_rate = rval & 0x1;
+		switch (slew_rate) {
+		case 0:
+			slew_rate = 100000;
+			break;
+		case 1:
+			slew_rate = 5000;
+			break;
+		}
+		rinfo->desc.ramp_delay = slew_rate;
+		break;
+	}
+
+	return 0;
+}
+
+static int max77620_init_pmic(struct max77620_regulator *pmic, int id)
+{
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
+	int ret;
+
+	/* Update power mode */
+	ret = max77620_regulator_get_power_mode(pmic, id);
+	if (ret < 0)
+		return ret;
+
+	pmic->current_power_mode[id] = ret;
+	pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
+
+	if (rpdata->active_fps_src == MAX77620_FPS_SRC_DEF) {
+		ret = max77620_regulator_get_fps_src(pmic, id);
+		if (ret < 0)
+			return ret;
+		rpdata->active_fps_src = ret;
+	}
+
+	 /* If rails are externally control of FPS then enable it always. */
+	if (rpdata->active_fps_src == MAX77620_FPS_SRC_NONE) {
+		ret = max77620_regulator_set_power_mode(pmic,
+					pmic->enable_power_mode[id], id);
+		if (ret < 0)
+			return ret;
+	} else {
+		if (pmic->current_power_mode[id] !=
+		     pmic->enable_power_mode[id]) {
+			ret = max77620_regulator_set_power_mode(pmic,
+					pmic->enable_power_mode[id], id);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	ret = max77620_regulator_set_fps_src(pmic, rpdata->active_fps_src, id);
+	if (ret < 0)
+		return ret;
+
+	ret = max77620_regulator_set_fps_slots(pmic, id, false);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int max77620_regulator_enable(struct regulator_dev *rdev)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+
+	if (pmic->active_fps_src[id] != MAX77620_FPS_SRC_NONE)
+		return 0;
+
+	return max77620_regulator_set_power_mode(pmic,
+			pmic->enable_power_mode[id], id);
+}
+
+static int max77620_regulator_disable(struct regulator_dev *rdev)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+
+	if (pmic->active_fps_src[id] != MAX77620_FPS_SRC_NONE)
+		return 0;
+
+	return max77620_regulator_set_power_mode(pmic,
+			MAX77620_POWER_MODE_DISABLE, id);
+}
+
+static int max77620_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	int ret = 1;
+
+	if (pmic->active_fps_src[id] != MAX77620_FPS_SRC_NONE)
+		return 1;
+
+	ret = max77620_regulator_get_power_mode(pmic, id);
+	if (ret < 0)
+		return ret;
+
+	if (ret != MAX77620_POWER_MODE_DISABLE)
+		return 1;
+
+	return 0;
+}
+
+static int max77620_regulator_set_mode(struct regulator_dev *rdev,
+				       unsigned int mode)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
+	bool fpwm = false;
+	int power_mode;
+	int ret;
+	u8 val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		fpwm = true;
+		power_mode = MAX77620_POWER_MODE_NORMAL;
+		break;
+
+	case REGULATOR_MODE_NORMAL:
+		power_mode = MAX77620_POWER_MODE_NORMAL;
+		break;
+
+	case REGULATOR_MODE_IDLE:
+		power_mode = MAX77620_POWER_MODE_LPM;
+		break;
+
+	default:
+		dev_err(pmic->dev, "Regulator %d mode %d is invalid\n",
+			id, mode);
+		return -EINVAL;
+	}
+
+	if (rinfo->type != MAX77620_REGULATOR_TYPE_SD)
+		goto skip_fpwm;
+
+	val = (fpwm) ? MAX77620_SD_FPWM_MASK : 0;
+	ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr,
+				 MAX77620_SD_FPWM_MASK, val);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n",
+			rinfo->cfg_addr, ret);
+		return ret;
+	}
+	rpdata->current_mode = mode;
+
+skip_fpwm:
+	ret = max77620_regulator_set_power_mode(pmic, power_mode, id);
+	if (ret < 0)
+		return ret;
+
+	pmic->enable_power_mode[id] = power_mode;
+
+	return 0;
+}
+
+static unsigned int max77620_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	int fpwm = 0;
+	int ret;
+	int pm_mode, reg_mode;
+	unsigned int val;
+
+	ret = max77620_regulator_get_power_mode(pmic, id);
+	if (ret < 0)
+		return 0;
+
+	pm_mode = ret;
+
+	if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
+		ret = regmap_read(pmic->rmap, rinfo->cfg_addr, &val);
+		if (ret < 0) {
+			dev_err(pmic->dev, "Reg 0x%02x read failed: %d\n",
+				rinfo->cfg_addr, ret);
+			return ret;
+		}
+		fpwm = !!(val & MAX77620_SD_FPWM_MASK);
+	}
+
+	switch (pm_mode) {
+	case MAX77620_POWER_MODE_NORMAL:
+	case MAX77620_POWER_MODE_DISABLE:
+		if (fpwm)
+			reg_mode = REGULATOR_MODE_FAST;
+		else
+			reg_mode = REGULATOR_MODE_NORMAL;
+		break;
+	case MAX77620_POWER_MODE_LPM:
+	case MAX77620_POWER_MODE_GLPM:
+		reg_mode = REGULATOR_MODE_IDLE;
+		break;
+	default:
+		return 0;
+	}
+
+	return reg_mode;
+}
+
+static int max77620_regulator_set_ramp_delay(struct regulator_dev *rdev,
+					     int ramp_delay)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	int ret, val;
+	u8 mask;
+
+	if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
+		if (ramp_delay <= 13750)
+			val = 0;
+		else if (ramp_delay <= 27500)
+			val = 1;
+		else if (ramp_delay <= 55000)
+			val = 2;
+		else
+			val = 3;
+		val <<= MAX77620_SD_SR_SHIFT;
+		mask = MAX77620_SD_SR_MASK;
+	} else {
+		if (ramp_delay <= 5000)
+			val = 1;
+		else
+			val = 0;
+		mask = MAX77620_LDO_SLEW_RATE_MASK;
+	}
+
+	ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr, mask, val);
+	if (ret < 0)
+		dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n",
+			rinfo->cfg_addr, ret);
+
+	return ret;
+}
+
+static int max77620_of_parse_cb(struct device_node *np,
+				const struct regulator_desc *desc,
+				struct regulator_config *config)
+{
+	struct max77620_regulator *pmic = config->driver_data;
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[desc->id];
+	u32 pval;
+	int ret;
+
+	ret = of_property_read_u32(np, "maxim,active-fps-source", &pval);
+	rpdata->active_fps_src = (!ret) ? pval : MAX77620_FPS_SRC_DEF;
+
+	ret = of_property_read_u32(np, "maxim,active-fps-power-up-slot", &pval);
+	rpdata->active_fps_pu_slot = (!ret) ? pval : -1;
+
+	ret = of_property_read_u32(
+			np, "maxim,active-fps-power-down-slot", &pval);
+	rpdata->active_fps_pd_slot = (!ret) ? pval : -1;
+
+	ret = of_property_read_u32(np, "maxim,suspend-fps-source", &pval);
+	rpdata->suspend_fps_src = (!ret) ? pval : -1;
+
+	ret = of_property_read_u32(
+			np, "maxim,suspend-fps-power-up-slot", &pval);
+	rpdata->suspend_fps_pu_slot = (!ret) ? pval : -1;
+
+	ret = of_property_read_u32(
+			np, "maxim,suspend-fps-power-down-slot", &pval);
+	rpdata->suspend_fps_pd_slot = (!ret) ? pval : -1;
+
+	return max77620_init_pmic(pmic, desc->id);
+}
+
+static struct regulator_ops max77620_regulator_ops = {
+	.is_enabled = max77620_regulator_is_enabled,
+	.enable = max77620_regulator_enable,
+	.disable = max77620_regulator_disable,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.set_mode = max77620_regulator_set_mode,
+	.get_mode = max77620_regulator_get_mode,
+	.set_ramp_delay = max77620_regulator_set_ramp_delay,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
+#define MAX77620_SD_CNF2_ROVS_EN_NONE	0
+#define RAIL_SD(_id, _name, _sname, _volt_mask, _min_uV, _max_uV,	\
+		_step_uV, _rs_add, _rs_mask)				\
+	[MAX77620_REGULATOR_ID_##_id] = {				\
+		.type = MAX77620_REGULATOR_TYPE_SD,			\
+		.volt_addr = MAX77620_REG_##_id,			\
+		.cfg_addr = MAX77620_REG_##_id##_CFG,			\
+		.fps_addr = MAX77620_REG_FPS_##_id,			\
+		.remote_sense_addr = _rs_add,				\
+		.remote_sense_mask = MAX77620_SD_CNF2_ROVS_EN_##_rs_mask, \
+		.power_mode_mask = MAX77620_SD_POWER_MODE_MASK,		\
+		.power_mode_shift = MAX77620_SD_POWER_MODE_SHIFT,	\
+		.desc = {						\
+			.name = max77620_rails(_name),			\
+			.of_match = of_match_ptr(#_name),		\
+			.regulators_node = of_match_ptr("regulators"),	\
+			.of_parse_cb = max77620_of_parse_cb,		\
+			.supply_name = _sname,				\
+			.id = MAX77620_REGULATOR_ID_##_id,		\
+			.ops = &max77620_regulator_ops,			\
+			.n_voltages = ((_max_uV - _min_uV) / _step_uV) + 1, \
+			.min_uV = _min_uV,				\
+			.uV_step = _step_uV,				\
+			.enable_time = 500,				\
+			.vsel_mask = MAX77620_##_volt_mask##_VOLT_MASK,	\
+			.vsel_reg = MAX77620_REG_##_id,			\
+			.active_discharge_off = 0,			\
+			.active_discharge_on = MAX77620_SD_CFG1_ADE_ENABLE, \
+			.active_discharge_mask = MAX77620_SD_CFG1_ADE_MASK, \
+			.active_discharge_reg = MAX77620_REG_##_id##_CFG, \
+			.type = REGULATOR_VOLTAGE,			\
+		},							\
+	}
+
+#define RAIL_LDO(_id, _name, _sname, _type, _min_uV, _max_uV, _step_uV) \
+	[MAX77620_REGULATOR_ID_##_id] = {				\
+		.type = MAX77620_REGULATOR_TYPE_LDO_##_type,		\
+		.volt_addr = MAX77620_REG_##_id##_CFG,			\
+		.cfg_addr = MAX77620_REG_##_id##_CFG2,			\
+		.fps_addr = MAX77620_REG_FPS_##_id,			\
+		.remote_sense_addr = 0xFF,				\
+		.power_mode_mask = MAX77620_LDO_POWER_MODE_MASK,	\
+		.power_mode_shift = MAX77620_LDO_POWER_MODE_SHIFT,	\
+		.desc = {						\
+			.name = max77620_rails(_name),			\
+			.of_match = of_match_ptr(#_name),		\
+			.regulators_node = of_match_ptr("regulators"),	\
+			.of_parse_cb = max77620_of_parse_cb,		\
+			.supply_name = _sname,				\
+			.id = MAX77620_REGULATOR_ID_##_id,		\
+			.ops = &max77620_regulator_ops,			\
+			.n_voltages = ((_max_uV - _min_uV) / _step_uV) + 1, \
+			.min_uV = _min_uV,				\
+			.uV_step = _step_uV,				\
+			.enable_time = 500,				\
+			.vsel_mask = MAX77620_LDO_VOLT_MASK,		\
+			.vsel_reg = MAX77620_REG_##_id##_CFG,		\
+			.active_discharge_off = 0,			\
+			.active_discharge_on = MAX77620_LDO_CFG2_ADE_ENABLE, \
+			.active_discharge_mask = MAX77620_LDO_CFG2_ADE_MASK, \
+			.active_discharge_reg = MAX77620_REG_##_id##_CFG2, \
+			.type = REGULATOR_VOLTAGE,			\
+		},							\
+	}
+
+static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = {
+	RAIL_SD(SD0, sd0, "in-sd0", SD0, 600000, 1400000, 12500, 0x22, SD0),
+	RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1),
+	RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+	RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+	RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+
+	RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000),
+	RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000),
+	RAIL_LDO(LDO2, ldo2, "in-ldo2",   P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500),
+	RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO7, ldo7, "in-ldo7-8", N, 800000, 3950000, 50000),
+	RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000),
+};
+
+static struct max77620_regulator_info max20024_regs_info[MAX77620_NUM_REGS] = {
+	RAIL_SD(SD0, sd0, "in-sd0", SD0, 800000, 1587500, 12500, 0x22, SD0),
+	RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 3387500, 12500, 0x22, SD1),
+	RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+	RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+	RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+
+	RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000),
+	RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000),
+	RAIL_LDO(LDO2, ldo2, "in-ldo2",   P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500),
+	RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO7, ldo7, "in-ldo7-8", N, 800000, 3950000, 50000),
+	RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000),
+};
+
+static int max77620_regulator_probe(struct platform_device *pdev)
+{
+	struct max77620_chip *max77620_chip = dev_get_drvdata(pdev->dev.parent);
+	struct max77620_regulator_info *rinfo;
+	struct device *dev = &pdev->dev;
+	struct regulator_config config = { };
+	struct max77620_regulator *pmic;
+	int ret = 0;
+	int id;
+
+	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pmic);
+	pmic->dev = dev;
+	pmic->rmap = max77620_chip->rmap;
+	if (!dev->of_node)
+		dev->of_node = pdev->dev.parent->of_node;
+
+	switch (max77620_chip->chip_id) {
+	case MAX77620:
+		rinfo = max77620_regs_info;
+		break;
+	default:
+		rinfo = max20024_regs_info;
+		break;
+	}
+
+	config.regmap = pmic->rmap;
+	config.dev = dev;
+	config.driver_data = pmic;
+
+	for (id = 0; id < MAX77620_NUM_REGS; id++) {
+		struct regulator_dev *rdev;
+		struct regulator_desc *rdesc;
+
+		if ((max77620_chip->chip_id == MAX77620) &&
+		    (id == MAX77620_REGULATOR_ID_SD4))
+			continue;
+
+		rdesc = &rinfo[id].desc;
+		pmic->rinfo[id] = &max77620_regs_info[id];
+		pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
+
+		ret = max77620_read_slew_rate(pmic, id);
+		if (ret < 0)
+			return ret;
+
+		rdev = devm_regulator_register(dev, rdesc, &config);
+		if (IS_ERR(rdev)) {
+			ret = PTR_ERR(rdev);
+			dev_err(dev, "Regulator registration %s failed: %d\n",
+				rdesc->name, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max77620_regulator_suspend(struct device *dev)
+{
+	struct max77620_regulator *pmic = dev_get_drvdata(dev);
+	struct max77620_regulator_pdata *reg_pdata;
+	int id;
+
+	for (id = 0; id < MAX77620_NUM_REGS; id++) {
+		reg_pdata = &pmic->reg_pdata[id];
+
+		max77620_regulator_set_fps_slots(pmic, id, true);
+		if (reg_pdata->suspend_fps_src < 0)
+			continue;
+
+		max77620_regulator_set_fps_src(pmic, reg_pdata->suspend_fps_src,
+					       id);
+	}
+
+	return 0;
+}
+
+static int max77620_regulator_resume(struct device *dev)
+{
+	struct max77620_regulator *pmic = dev_get_drvdata(dev);
+	struct max77620_regulator_pdata *reg_pdata;
+	int id;
+
+	for (id = 0; id < MAX77620_NUM_REGS; id++) {
+		reg_pdata = &pmic->reg_pdata[id];
+
+		max77620_regulator_set_fps_slots(pmic, id, false);
+		if (reg_pdata->active_fps_src < 0)
+			continue;
+		max77620_regulator_set_fps_src(pmic, reg_pdata->active_fps_src,
+					       id);
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops max77620_regulator_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(max77620_regulator_suspend,
+				max77620_regulator_resume)
+};
+
+static const struct platform_device_id max77620_regulator_devtype[] = {
+	{ .name = "max77620-pmic", },
+	{ .name = "max20024-pmic", },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, max77620_regulator_devtype);
+
+static struct platform_driver max77620_regulator_driver = {
+	.probe = max77620_regulator_probe,
+	.id_table = max77620_regulator_devtype,
+	.driver = {
+		.name = "max77620-pmic",
+		.pm = &max77620_regulator_pm_ops,
+	},
+};
+
+module_platform_driver(max77620_regulator_driver);
+
+MODULE_DESCRIPTION("MAX77620/MAX20024 regulator driver");
+MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686-regulator.c
similarity index 100%
rename from drivers/regulator/max77686.c
rename to drivers/regulator/max77686-regulator.c
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802-regulator.c
similarity index 100%
rename from drivers/regulator/max77802.c
rename to drivers/regulator/max77802-regulator.c