| /* |
| * drivers/base/memory.c - basic Memory class support |
| * |
| * Written by Matt Tolentino <matthew.e.tolentino@intel.com> |
| * Dave Hansen <haveblue@us.ibm.com> |
| * |
| * This file provides the necessary infrastructure to represent |
| * a SPARSEMEM-memory-model system's physical memory in /sysfs. |
| * All arch-independent code that assumes MEMORY_HOTPLUG requires |
| * SPARSEMEM should be contained here, or in mm/memory_hotplug.c. |
| */ |
| |
| #include <linux/sysdev.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/topology.h> |
| #include <linux/capability.h> |
| #include <linux/device.h> |
| #include <linux/memory.h> |
| #include <linux/kobject.h> |
| #include <linux/memory_hotplug.h> |
| #include <linux/mm.h> |
| #include <linux/mutex.h> |
| #include <linux/stat.h> |
| |
| #include <asm/atomic.h> |
| #include <asm/uaccess.h> |
| |
| #define MEMORY_CLASS_NAME "memory" |
| |
| static struct sysdev_class memory_sysdev_class = { |
| .name = MEMORY_CLASS_NAME, |
| }; |
| |
| static const char *memory_uevent_name(struct kset *kset, struct kobject *kobj) |
| { |
| return MEMORY_CLASS_NAME; |
| } |
| |
| static int memory_uevent(struct kset *kset, struct kobject *obj, struct kobj_uevent_env *env) |
| { |
| int retval = 0; |
| |
| return retval; |
| } |
| |
| static struct kset_uevent_ops memory_uevent_ops = { |
| .name = memory_uevent_name, |
| .uevent = memory_uevent, |
| }; |
| |
| static BLOCKING_NOTIFIER_HEAD(memory_chain); |
| |
| int register_memory_notifier(struct notifier_block *nb) |
| { |
| return blocking_notifier_chain_register(&memory_chain, nb); |
| } |
| EXPORT_SYMBOL(register_memory_notifier); |
| |
| void unregister_memory_notifier(struct notifier_block *nb) |
| { |
| blocking_notifier_chain_unregister(&memory_chain, nb); |
| } |
| EXPORT_SYMBOL(unregister_memory_notifier); |
| |
| static ATOMIC_NOTIFIER_HEAD(memory_isolate_chain); |
| |
| int register_memory_isolate_notifier(struct notifier_block *nb) |
| { |
| return atomic_notifier_chain_register(&memory_isolate_chain, nb); |
| } |
| EXPORT_SYMBOL(register_memory_isolate_notifier); |
| |
| void unregister_memory_isolate_notifier(struct notifier_block *nb) |
| { |
| atomic_notifier_chain_unregister(&memory_isolate_chain, nb); |
| } |
| EXPORT_SYMBOL(unregister_memory_isolate_notifier); |
| |
| /* |
| * register_memory - Setup a sysfs device for a memory block |
| */ |
| static |
| int register_memory(struct memory_block *memory, struct mem_section *section) |
| { |
| int error; |
| |
| memory->sysdev.cls = &memory_sysdev_class; |
| memory->sysdev.id = __section_nr(section); |
| |
| error = sysdev_register(&memory->sysdev); |
| return error; |
| } |
| |
| static void |
| unregister_memory(struct memory_block *memory, struct mem_section *section) |
| { |
| BUG_ON(memory->sysdev.cls != &memory_sysdev_class); |
| BUG_ON(memory->sysdev.id != __section_nr(section)); |
| |
| /* drop the ref. we got in remove_memory_block() */ |
| kobject_put(&memory->sysdev.kobj); |
| sysdev_unregister(&memory->sysdev); |
| } |
| |
| /* |
| * use this as the physical section index that this memsection |
| * uses. |
| */ |
| |
| static ssize_t show_mem_phys_index(struct sys_device *dev, |
| struct sysdev_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = |
| container_of(dev, struct memory_block, sysdev); |
| return sprintf(buf, "%08lx\n", mem->phys_index); |
| } |
| |
| /* |
| * Show whether the section of memory is likely to be hot-removable |
| */ |
| static ssize_t show_mem_removable(struct sys_device *dev, |
| struct sysdev_attribute *attr, char *buf) |
| { |
| unsigned long start_pfn; |
| int ret; |
| struct memory_block *mem = |
| container_of(dev, struct memory_block, sysdev); |
| |
| start_pfn = section_nr_to_pfn(mem->phys_index); |
| ret = is_mem_section_removable(start_pfn, PAGES_PER_SECTION); |
| return sprintf(buf, "%d\n", ret); |
| } |
| |
| /* |
| * online, offline, going offline, etc. |
| */ |
| static ssize_t show_mem_state(struct sys_device *dev, |
| struct sysdev_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = |
| container_of(dev, struct memory_block, sysdev); |
| ssize_t len = 0; |
| |
| /* |
| * We can probably put these states in a nice little array |
| * so that they're not open-coded |
| */ |
| switch (mem->state) { |
| case MEM_ONLINE: |
| len = sprintf(buf, "online\n"); |
| break; |
| case MEM_OFFLINE: |
| len = sprintf(buf, "offline\n"); |
| break; |
| case MEM_GOING_OFFLINE: |
| len = sprintf(buf, "going-offline\n"); |
| break; |
| default: |
| len = sprintf(buf, "ERROR-UNKNOWN-%ld\n", |
| mem->state); |
| WARN_ON(1); |
| break; |
| } |
| |
| return len; |
| } |
| |
| int memory_notify(unsigned long val, void *v) |
| { |
| return blocking_notifier_call_chain(&memory_chain, val, v); |
| } |
| |
| int memory_isolate_notify(unsigned long val, void *v) |
| { |
| return atomic_notifier_call_chain(&memory_isolate_chain, val, v); |
| } |
| |
| /* |
| * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is |
| * OK to have direct references to sparsemem variables in here. |
| */ |
| static int |
| memory_block_action(struct memory_block *mem, unsigned long action) |
| { |
| int i; |
| unsigned long psection; |
| unsigned long start_pfn, start_paddr; |
| struct page *first_page; |
| int ret; |
| int old_state = mem->state; |
| |
| psection = mem->phys_index; |
| first_page = pfn_to_page(psection << PFN_SECTION_SHIFT); |
| |
| /* |
| * The probe routines leave the pages reserved, just |
| * as the bootmem code does. Make sure they're still |
| * that way. |
| */ |
| if (action == MEM_ONLINE) { |
| for (i = 0; i < PAGES_PER_SECTION; i++) { |
| if (PageReserved(first_page+i)) |
| continue; |
| |
| printk(KERN_WARNING "section number %ld page number %d " |
| "not reserved, was it already online? \n", |
| psection, i); |
| return -EBUSY; |
| } |
| } |
| |
| switch (action) { |
| case MEM_ONLINE: |
| start_pfn = page_to_pfn(first_page); |
| ret = online_pages(start_pfn, PAGES_PER_SECTION); |
| break; |
| case MEM_OFFLINE: |
| mem->state = MEM_GOING_OFFLINE; |
| start_paddr = page_to_pfn(first_page) << PAGE_SHIFT; |
| ret = remove_memory(start_paddr, |
| PAGES_PER_SECTION << PAGE_SHIFT); |
| if (ret) { |
| mem->state = old_state; |
| break; |
| } |
| break; |
| default: |
| WARN(1, KERN_WARNING "%s(%p, %ld) unknown action: %ld\n", |
| __func__, mem, action, action); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int memory_block_change_state(struct memory_block *mem, |
| unsigned long to_state, unsigned long from_state_req) |
| { |
| int ret = 0; |
| mutex_lock(&mem->state_mutex); |
| |
| if (mem->state != from_state_req) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = memory_block_action(mem, to_state); |
| if (!ret) |
| mem->state = to_state; |
| |
| out: |
| mutex_unlock(&mem->state_mutex); |
| return ret; |
| } |
| |
| static ssize_t |
| store_mem_state(struct sys_device *dev, |
| struct sysdev_attribute *attr, const char *buf, size_t count) |
| { |
| struct memory_block *mem; |
| unsigned int phys_section_nr; |
| int ret = -EINVAL; |
| |
| mem = container_of(dev, struct memory_block, sysdev); |
| phys_section_nr = mem->phys_index; |
| |
| if (!present_section_nr(phys_section_nr)) |
| goto out; |
| |
| if (!strncmp(buf, "online", min((int)count, 6))) |
| ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE); |
| else if(!strncmp(buf, "offline", min((int)count, 7))) |
| ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE); |
| out: |
| if (ret) |
| return ret; |
| return count; |
| } |
| |
| /* |
| * phys_device is a bad name for this. What I really want |
| * is a way to differentiate between memory ranges that |
| * are part of physical devices that constitute |
| * a complete removable unit or fru. |
| * i.e. do these ranges belong to the same physical device, |
| * s.t. if I offline all of these sections I can then |
| * remove the physical device? |
| */ |
| static ssize_t show_phys_device(struct sys_device *dev, |
| struct sysdev_attribute *attr, char *buf) |
| { |
| struct memory_block *mem = |
| container_of(dev, struct memory_block, sysdev); |
| return sprintf(buf, "%d\n", mem->phys_device); |
| } |
| |
| static SYSDEV_ATTR(phys_index, 0444, show_mem_phys_index, NULL); |
| static SYSDEV_ATTR(state, 0644, show_mem_state, store_mem_state); |
| static SYSDEV_ATTR(phys_device, 0444, show_phys_device, NULL); |
| static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL); |
| |
| #define mem_create_simple_file(mem, attr_name) \ |
| sysdev_create_file(&mem->sysdev, &attr_##attr_name) |
| #define mem_remove_simple_file(mem, attr_name) \ |
| sysdev_remove_file(&mem->sysdev, &attr_##attr_name) |
| |
| /* |
| * Block size attribute stuff |
| */ |
| static ssize_t |
| print_block_size(struct class *class, char *buf) |
| { |
| return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); |
| } |
| |
| static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); |
| |
| static int block_size_init(void) |
| { |
| return sysfs_create_file(&memory_sysdev_class.kset.kobj, |
| &class_attr_block_size_bytes.attr); |
| } |
| |
| /* |
| * Some architectures will have custom drivers to do this, and |
| * will not need to do it from userspace. The fake hot-add code |
| * as well as ppc64 will do all of their discovery in userspace |
| * and will require this interface. |
| */ |
| #ifdef CONFIG_ARCH_MEMORY_PROBE |
| static ssize_t |
| memory_probe_store(struct class *class, const char *buf, size_t count) |
| { |
| u64 phys_addr; |
| int nid; |
| int ret; |
| |
| phys_addr = simple_strtoull(buf, NULL, 0); |
| |
| nid = memory_add_physaddr_to_nid(phys_addr); |
| ret = add_memory(nid, phys_addr, PAGES_PER_SECTION << PAGE_SHIFT); |
| |
| if (ret) |
| count = ret; |
| |
| return count; |
| } |
| static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); |
| |
| static int memory_probe_init(void) |
| { |
| return sysfs_create_file(&memory_sysdev_class.kset.kobj, |
| &class_attr_probe.attr); |
| } |
| #else |
| static inline int memory_probe_init(void) |
| { |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_MEMORY_FAILURE |
| /* |
| * Support for offlining pages of memory |
| */ |
| |
| /* Soft offline a page */ |
| static ssize_t |
| store_soft_offline_page(struct class *class, const char *buf, size_t count) |
| { |
| int ret; |
| u64 pfn; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| if (strict_strtoull(buf, 0, &pfn) < 0) |
| return -EINVAL; |
| pfn >>= PAGE_SHIFT; |
| if (!pfn_valid(pfn)) |
| return -ENXIO; |
| ret = soft_offline_page(pfn_to_page(pfn), 0); |
| return ret == 0 ? count : ret; |
| } |
| |
| /* Forcibly offline a page, including killing processes. */ |
| static ssize_t |
| store_hard_offline_page(struct class *class, const char *buf, size_t count) |
| { |
| int ret; |
| u64 pfn; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| if (strict_strtoull(buf, 0, &pfn) < 0) |
| return -EINVAL; |
| pfn >>= PAGE_SHIFT; |
| ret = __memory_failure(pfn, 0, 0); |
| return ret ? ret : count; |
| } |
| |
| static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page); |
| static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page); |
| |
| static __init int memory_fail_init(void) |
| { |
| int err; |
| |
| err = sysfs_create_file(&memory_sysdev_class.kset.kobj, |
| &class_attr_soft_offline_page.attr); |
| if (!err) |
| err = sysfs_create_file(&memory_sysdev_class.kset.kobj, |
| &class_attr_hard_offline_page.attr); |
| return err; |
| } |
| #else |
| static inline int memory_fail_init(void) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Note that phys_device is optional. It is here to allow for |
| * differentiation between which *physical* devices each |
| * section belongs to... |
| */ |
| |
| static int add_memory_block(int nid, struct mem_section *section, |
| unsigned long state, int phys_device, |
| enum mem_add_context context) |
| { |
| struct memory_block *mem = kzalloc(sizeof(*mem), GFP_KERNEL); |
| int ret = 0; |
| |
| if (!mem) |
| return -ENOMEM; |
| |
| mem->phys_index = __section_nr(section); |
| mem->state = state; |
| mutex_init(&mem->state_mutex); |
| mem->phys_device = phys_device; |
| |
| ret = register_memory(mem, section); |
| if (!ret) |
| ret = mem_create_simple_file(mem, phys_index); |
| if (!ret) |
| ret = mem_create_simple_file(mem, state); |
| if (!ret) |
| ret = mem_create_simple_file(mem, phys_device); |
| if (!ret) |
| ret = mem_create_simple_file(mem, removable); |
| if (!ret) { |
| if (context == HOTPLUG) |
| ret = register_mem_sect_under_node(mem, nid); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * For now, we have a linear search to go find the appropriate |
| * memory_block corresponding to a particular phys_index. If |
| * this gets to be a real problem, we can always use a radix |
| * tree or something here. |
| * |
| * This could be made generic for all sysdev classes. |
| */ |
| struct memory_block *find_memory_block(struct mem_section *section) |
| { |
| struct kobject *kobj; |
| struct sys_device *sysdev; |
| struct memory_block *mem; |
| char name[sizeof(MEMORY_CLASS_NAME) + 9 + 1]; |
| |
| /* |
| * This only works because we know that section == sysdev->id |
| * slightly redundant with sysdev_register() |
| */ |
| sprintf(&name[0], "%s%d", MEMORY_CLASS_NAME, __section_nr(section)); |
| |
| kobj = kset_find_obj(&memory_sysdev_class.kset, name); |
| if (!kobj) |
| return NULL; |
| |
| sysdev = container_of(kobj, struct sys_device, kobj); |
| mem = container_of(sysdev, struct memory_block, sysdev); |
| |
| return mem; |
| } |
| |
| int remove_memory_block(unsigned long node_id, struct mem_section *section, |
| int phys_device) |
| { |
| struct memory_block *mem; |
| |
| mem = find_memory_block(section); |
| unregister_mem_sect_under_nodes(mem); |
| mem_remove_simple_file(mem, phys_index); |
| mem_remove_simple_file(mem, state); |
| mem_remove_simple_file(mem, phys_device); |
| mem_remove_simple_file(mem, removable); |
| unregister_memory(mem, section); |
| |
| return 0; |
| } |
| |
| /* |
| * need an interface for the VM to add new memory regions, |
| * but without onlining it. |
| */ |
| int register_new_memory(int nid, struct mem_section *section) |
| { |
| return add_memory_block(nid, section, MEM_OFFLINE, 0, HOTPLUG); |
| } |
| |
| int unregister_memory_section(struct mem_section *section) |
| { |
| if (!present_section(section)) |
| return -EINVAL; |
| |
| return remove_memory_block(0, section, 0); |
| } |
| |
| /* |
| * Initialize the sysfs support for memory devices... |
| */ |
| int __init memory_dev_init(void) |
| { |
| unsigned int i; |
| int ret; |
| int err; |
| |
| memory_sysdev_class.kset.uevent_ops = &memory_uevent_ops; |
| ret = sysdev_class_register(&memory_sysdev_class); |
| if (ret) |
| goto out; |
| |
| /* |
| * Create entries for memory sections that were found |
| * during boot and have been initialized |
| */ |
| for (i = 0; i < NR_MEM_SECTIONS; i++) { |
| if (!present_section_nr(i)) |
| continue; |
| err = add_memory_block(0, __nr_to_section(i), MEM_ONLINE, |
| 0, BOOT); |
| if (!ret) |
| ret = err; |
| } |
| |
| err = memory_probe_init(); |
| if (!ret) |
| ret = err; |
| err = memory_fail_init(); |
| if (!ret) |
| ret = err; |
| err = block_size_init(); |
| if (!ret) |
| ret = err; |
| out: |
| if (ret) |
| printk(KERN_ERR "%s() failed: %d\n", __func__, ret); |
| return ret; |
| } |