net: stmmac: don't set tx delay in RGMII_ID and RGMII_TXID mode
As documented in Documentation/devicetree/bindings/net/ethernet.txt,
in RGMII_ID and RGMII_TXID mode the MAC should not add a tx delay.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 8840a36..9685555 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -177,12 +177,19 @@
{
int ret;
unsigned long clk_rate;
- u8 tx_dly_val;
+ u8 tx_dly_val = 0;
switch (dwmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
+ /* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
+ * 8ns are exactly one cycle of the 125MHz RGMII TX clock):
+ * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
+ */
+ tx_dly_val = dwmac->tx_delay_ns >> 1;
+ /* fall through */
+
+ case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* Generate a 25MHz clock for the PHY */
clk_rate = 25 * 1000 * 1000;
@@ -195,11 +202,6 @@
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_INVERTED_RMII_CLK, 0);
- /* TX clock delay in ns = "8ns / 4 * tx_dly_val" (where
- * 8ns are exactly one cycle of the 125MHz RGMII TX clock):
- * 0ns = 0x0, 2ns = 0x1, 4ns = 0x2, 6ns = 0x3
- */
- tx_dly_val = dwmac->tx_delay_ns >> 1;
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
break;