[POWERPC] 83xx: Cleaned up 83xx platform dts files
* Fixed up top level compatible property for all boards
* Removed explicit linux,phandle usage. Use references and labels now
* Fixed interrupt sense attribute, some interrupts were marked edge, that are level
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc8323emds.dts
index 57a3665..06b3106 100644
--- a/arch/powerpc/boot/dts/mpc8323emds.dts
+++ b/arch/powerpc/boot/dts/mpc8323emds.dts
@@ -11,16 +11,14 @@
/ {
model = "MPC8323EMDS";
- compatible = "MPC83xx";
+ compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8323@0 {
device_type = "cpu";
@@ -33,13 +31,11 @@
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 08000000>;
};
@@ -68,7 +64,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -78,7 +74,7 @@
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
@@ -87,7 +83,7 @@
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
crypto@30000 {
@@ -96,7 +92,7 @@
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
@@ -105,51 +101,50 @@
};
pci@8500 {
- linux,phandle = <8500>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 90000000 0 10000000
@@ -164,8 +159,7 @@
device_type = "pci";
};
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -179,8 +173,7 @@
device_type = "par_io";
num-ports = <7>;
- ucc_pin@03 {
- linux,phandle = <140003>;
+ pio3: ucc_pin@03 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 4 3 0 2 0 /* MDIO */
@@ -203,8 +196,7 @@
1 c 1 0 1 0 /* TX_EN */
1 d 2 0 1 0>;/* CRS */
};
- ucc_pin@04 {
- linux,phandle = <140004>;
+ pio4: ucc_pin@04 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 1f 2 0 1 0 /* RX_CLK (CLK7) */
@@ -251,7 +243,7 @@
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
@@ -260,7 +252,7 @@
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
@@ -269,7 +261,7 @@
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "slave";
};
@@ -280,12 +272,12 @@
device-id = <3>;
reg = <2200 200>;
interrupts = <22>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <19>;
tx-clock = <1a>;
- phy-handle = <212003>;
- pio-handle = <140003>;
+ phy-handle = < &phy3 >;
+ pio-handle = < &pio3 >;
};
ucc@3200 {
@@ -295,12 +287,12 @@
device-id = <4>;
reg = <3000 200>;
interrupts = <23>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <17>;
tx-clock = <18>;
- phy-handle = <212004>;
- pio-handle = <140004>;
+ phy-handle = < &phy4 >;
+ pio-handle = < &pio4 >;
};
mdio@2320 {
@@ -310,26 +302,23 @@
device_type = "mdio";
compatible = "ucc_geth_phy";
- ethernet-phy@03 {
- linux,phandle = <212003>;
- interrupt-parent = <700>;
- interrupts = <11 2>;
+ phy3: ethernet-phy@03 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
reg = <3>;
device_type = "ethernet-phy";
interface = <3>; //ENET_100_MII
};
- ethernet-phy@04 {
- linux,phandle = <212004>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy4: ethernet-phy@04 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <4>;
device_type = "ethernet-phy";
interface = <3>;
};
};
- qeic@80 {
- linux,phandle = <80>;
+ qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
@@ -338,7 +327,7 @@
built-in;
big-endian;
interrupts = <20 8 21 8>; //high:32 low:33
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
};
};