| #ifndef __ASM_SH64_CACHE_H |
| #define __ASM_SH64_CACHE_H |
| |
| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * include/asm-sh64/cache.h |
| * |
| * Copyright (C) 2000, 2001 Paolo Alberelli |
| * Copyright (C) 2003, 2004 Paul Mundt |
| * |
| */ |
| |
| #define L1_CACHE_SHIFT 5 |
| |
| /* Valid and Dirty bits */ |
| #define SH_CACHE_VALID (1LL<<0) |
| #define SH_CACHE_UPDATED (1LL<<57) |
| |
| /* Cache flags */ |
| #define SH_CACHE_MODE_WT (1LL<<0) |
| #define SH_CACHE_MODE_WB (1LL<<1) |
| |
| /* |
| * Control Registers. |
| */ |
| #define ICCR_BASE 0x01600000 /* Instruction Cache Control Register */ |
| #define ICCR_REG0 0 /* Register 0 offset */ |
| #define ICCR_REG1 1 /* Register 1 offset */ |
| #define ICCR0 ICCR_BASE+ICCR_REG0 |
| #define ICCR1 ICCR_BASE+ICCR_REG1 |
| |
| #define ICCR0_OFF 0x0 /* Set ICACHE off */ |
| #define ICCR0_ON 0x1 /* Set ICACHE on */ |
| #define ICCR0_ICI 0x2 /* Invalidate all in IC */ |
| |
| #define ICCR1_NOLOCK 0x0 /* Set No Locking */ |
| |
| #define OCCR_BASE 0x01E00000 /* Operand Cache Control Register */ |
| #define OCCR_REG0 0 /* Register 0 offset */ |
| #define OCCR_REG1 1 /* Register 1 offset */ |
| #define OCCR0 OCCR_BASE+OCCR_REG0 |
| #define OCCR1 OCCR_BASE+OCCR_REG1 |
| |
| #define OCCR0_OFF 0x0 /* Set OCACHE off */ |
| #define OCCR0_ON 0x1 /* Set OCACHE on */ |
| #define OCCR0_OCI 0x2 /* Invalidate all in OC */ |
| #define OCCR0_WT 0x4 /* Set OCACHE in WT Mode */ |
| #define OCCR0_WB 0x0 /* Set OCACHE in WB Mode */ |
| |
| #define OCCR1_NOLOCK 0x0 /* Set No Locking */ |
| |
| /* |
| * SH-5 |
| * A bit of description here, for neff=32. |
| * |
| * |<--- tag (19 bits) --->| |
| * +-----------------------------+-----------------+------+----------+------+ |
| * | | | ways |set index |offset| |
| * +-----------------------------+-----------------+------+----------+------+ |
| * ^ 2 bits 8 bits 5 bits |
| * +- Bit 31 |
| * |
| * Cacheline size is based on offset: 5 bits = 32 bytes per line |
| * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG |
| * have a broader space for registers. These are outlined by |
| * CACHE_?C_*_STEP below. |
| * |
| */ |
| |
| /* Instruction cache */ |
| #define CACHE_IC_ADDRESS_ARRAY 0x01000000 |
| |
| /* Operand Cache */ |
| #define CACHE_OC_ADDRESS_ARRAY 0x01800000 |
| |
| /* These declarations relate to cache 'synonyms' in the operand cache. A |
| 'synonym' occurs where effective address bits overlap between those used for |
| indexing the cache sets and those passed to the MMU for translation. In the |
| case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */ |
| |
| #define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */ |
| #define CACHE_OC_SYN_SHIFT 12 |
| /* Mask to select synonym bit(s) */ |
| #define CACHE_OC_SYN_MASK (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT) |
| |
| /* |
| * Instruction cache can't be invalidated based on physical addresses. |
| * No Instruction Cache defines required, then. |
| */ |
| |
| #endif /* __ASM_SH64_CACHE_H */ |