staging: brcm80211: fixed checkpatch warnings for 'include' dir
All of them being 'line longer than 80 chars' type of warning.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/brcm80211/include/brcmu_utils.h b/drivers/staging/brcm80211/include/brcmu_utils.h
index 513fa34..da13e24 100644
--- a/drivers/staging/brcm80211/include/brcmu_utils.h
+++ b/drivers/staging/brcm80211/include/brcmu_utils.h
@@ -264,7 +264,8 @@
u8 data[1];
};
-#define ETHER_ADDR_STR_LEN 18 /* 18-bytes of Ethernet address buffer length */
+/* 18-bytes of Ethernet address buffer length */
+#define ETHER_ADDR_STR_LEN 18
/* externs */
/* crc */
diff --git a/drivers/staging/brcm80211/include/brcmu_wifi.h b/drivers/staging/brcm80211/include/brcmu_wifi.h
index 949349f..717d885 100644
--- a/drivers/staging/brcm80211/include/brcmu_wifi.h
+++ b/drivers/staging/brcm80211/include/brcmu_wifi.h
@@ -31,13 +31,16 @@
#define CH_EWA_VALID 0x04
#define CH_20MHZ_APART 4
#define CH_10MHZ_APART 2
-#define CH_5MHZ_APART 1 /* 2G band channels are 5 Mhz apart */
+#define CH_5MHZ_APART 1 /* 2G band channels are 5 Mhz apart */
#define CH_MAX_2G_CHANNEL 14 /* Max channel in 2G band */
#define BRCM_MAX_2G_CHANNEL CH_MAX_2G_CHANNEL /* legacy define */
-#define MAXCHANNEL 224 /* max # supported channels. The max channel no is 216,
- * this is that + 1 rounded up to a multiple of NBBY (8).
- * DO NOT MAKE it > 255: channels are u8's all over
- */
+
+/*
+ * max # supported channels. The max channel no is 216, this is that + 1
+ * rounded up to a multiple of NBBY (8). DO NOT MAKE it > 255: channels are
+ * u8's all over
+*/
+#define MAXCHANNEL 224
#define WL_CHANSPEC_CHAN_MASK 0x00ff
#define WL_CHANSPEC_CHAN_SHIFT 0
@@ -66,20 +69,30 @@
#define WF_CHAN_FACTOR_4_G 8000 /* 4.9 GHz band for Japan */
/* channel defines */
-#define LOWER_20_SB(channel) (((channel) > CH_10MHZ_APART) ? ((channel) - CH_10MHZ_APART) : 0)
-#define UPPER_20_SB(channel) (((channel) < (MAXCHANNEL - CH_10MHZ_APART)) ? \
- ((channel) + CH_10MHZ_APART) : 0)
-#define CHSPEC_BANDUNIT(chspec) (CHSPEC_IS5G(chspec) ? BAND_5G_INDEX : \
- BAND_2G_INDEX)
-#define CH20MHZ_CHSPEC(channel) (u16)((u16)(channel) | WL_CHANSPEC_BW_20 | \
- WL_CHANSPEC_CTL_SB_NONE | (((channel) <= CH_MAX_2G_CHANNEL) ? \
- WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G))
-#define NEXT_20MHZ_CHAN(channel) (((channel) < (MAXCHANNEL - CH_20MHZ_APART)) ? \
- ((channel) + CH_20MHZ_APART) : 0)
-#define CH40MHZ_CHSPEC(channel, ctlsb) (u16) \
- ((channel) | (ctlsb) | WL_CHANSPEC_BW_40 | \
- ((channel) <= CH_MAX_2G_CHANNEL ? WL_CHANSPEC_BAND_2G : \
- WL_CHANSPEC_BAND_5G))
+#define LOWER_20_SB(channel) \
+ (((channel) > CH_10MHZ_APART) ? ((channel) - CH_10MHZ_APART) : 0)
+
+#define UPPER_20_SB(channel) \
+ (((channel) < (MAXCHANNEL - CH_10MHZ_APART)) ? \
+ ((channel) + CH_10MHZ_APART) : 0)
+
+#define CHSPEC_BANDUNIT(chspec) \
+ (CHSPEC_IS5G(chspec) ? BAND_5G_INDEX : BAND_2G_INDEX)
+
+#define CH20MHZ_CHSPEC(channel) \
+ (u16)((u16)(channel) | WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE | \
+ (((channel) <= CH_MAX_2G_CHANNEL) ? \
+ WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G))
+
+#define NEXT_20MHZ_CHAN(channel) \
+ (((channel) < (MAXCHANNEL - CH_20MHZ_APART)) ? \
+ ((channel) + CH_20MHZ_APART) : 0)
+
+#define CH40MHZ_CHSPEC(channel, ctlsb) \
+ (u16)((channel) | (ctlsb) | WL_CHANSPEC_BW_40 | \
+ ((channel) <= CH_MAX_2G_CHANNEL ? \
+ WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G))
+
#define CHSPEC_CHANNEL(chspec) ((u8)((chspec) & WL_CHANSPEC_CHAN_MASK))
#define CHSPEC_BAND(chspec) ((chspec) & WL_CHANSPEC_BAND_MASK)
@@ -97,22 +110,40 @@
#define CHSPEC_CTL_SB(chspec) ((chspec) & WL_CHANSPEC_CTL_SB_MASK)
#define CHSPEC_BW(chspec) ((chspec) & WL_CHANSPEC_BW_MASK)
-#define CHSPEC_IS10(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_10)
-#define CHSPEC_IS20(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20)
+
+#define CHSPEC_IS10(chspec) \
+ (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_10)
+
+#define CHSPEC_IS20(chspec) \
+ (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20)
+
#ifndef CHSPEC_IS40
-#define CHSPEC_IS40(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)
+#define CHSPEC_IS40(chspec) \
+ (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)
#endif
#endif /* !WL11N_20MHZONLY */
-#define CHSPEC_IS5G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G)
-#define CHSPEC_IS2G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G)
-#define CHSPEC_SB_NONE(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_NONE)
-#define CHSPEC_SB_UPPER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER)
-#define CHSPEC_SB_LOWER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER)
-#define CHSPEC_CTL_CHAN(chspec) ((CHSPEC_SB_LOWER(chspec)) ? \
- (LOWER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))) : \
- (UPPER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))))
+#define CHSPEC_IS5G(chspec) \
+ (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G)
+
+#define CHSPEC_IS2G(chspec) \
+ (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G)
+
+#define CHSPEC_SB_NONE(chspec) \
+ (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_NONE)
+
+#define CHSPEC_SB_UPPER(chspec) \
+ (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER)
+
+#define CHSPEC_SB_LOWER(chspec) \
+ (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER)
+
+#define CHSPEC_CTL_CHAN(chspec) \
+ ((CHSPEC_SB_LOWER(chspec)) ? \
+ (LOWER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))) : \
+ (UPPER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))))
+
#define CHSPEC2BAND(chspec) (CHSPEC_IS5G(chspec) ? BRCM_BAND_5G : BRCM_BAND_2G)
#define CHANSPEC_STR_LEN 8
@@ -147,9 +178,9 @@
extern bool brcmu_chspec_malformed(u16 chanspec);
/*
- * This function returns the channel number that control traffic is being sent on, for legacy
- * channels this is just the channel number, for 40MHZ channels it is the upper or lowre 20MHZ
- * sideband depending on the chanspec selected
+ * This function returns the channel number that control traffic is being sent
+ * on, for legacy channels this is just the channel number, for 40MHZ channels
+ * it is the upper or lower 20MHZ sideband depending on the chanspec selected.
*/
extern u8 brcmu_chspec_ctlchan(u16 chspec);
@@ -185,11 +216,13 @@
#define CRYPTO_ALGO_NALG 7
/* wireless security bitvec */
+
#define WEP_ENABLED 0x0001
#define TKIP_ENABLED 0x0002
#define AES_ENABLED 0x0004
#define WSEC_SWFLAG 0x0008
-#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */
+/* to go into transition mode without setting wep */
+#define SES_OW_ENABLED 0x0040
/* WPA authentication mode bitvec */
#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */
@@ -198,7 +231,7 @@
#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */
#define WPA_AUTH_RESERVED1 0x0008
#define WPA_AUTH_RESERVED2 0x0010
- /* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */
+
#define WPA2_AUTH_RESERVED1 0x0020
#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */
#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */
diff --git a/drivers/staging/brcm80211/include/chipcommon.h b/drivers/staging/brcm80211/include/chipcommon.h
index 8de5913..fefabc3 100644
--- a/drivers/staging/brcm80211/include/chipcommon.h
+++ b/drivers/staging/brcm80211/include/chipcommon.h
@@ -231,7 +231,8 @@
#define CC_CAP_UARTS_MASK 0x00000003 /* Number of UARTs */
#define CC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */
#define CC_CAP_UCLKSEL 0x00000018 /* UARTs clock select */
-#define CC_CAP_UINTCLK 0x00000008 /* UARTs are driven by internal divided clock */
+/* UARTs are driven by internal divided clock */
+#define CC_CAP_UINTCLK 0x00000008
#define CC_CAP_UARTGPIO 0x00000020 /* UARTs own GPIOs 15:12 */
#define CC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */
#define CC_CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */
@@ -248,10 +249,12 @@
#define CC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */
#define CC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */
#define CC_CAP_SROM 0x40000000 /* Srom Present, rev >= 32 */
-#define CC_CAP_NFLASH 0x80000000 /* Nand flash present, rev >= 35 */
+/* Nand flash present, rev >= 35 */
+#define CC_CAP_NFLASH 0x80000000
#define CC_CAP2_SECI 0x00000001 /* SECI Present, rev >= 36 */
-#define CC_CAP2_GSIO 0x00000002 /* GSIO (spi/i2c) present, rev >= 37 */
+/* GSIO (spi/i2c) present, rev >= 37 */
+#define CC_CAP2_GSIO 0x00000002
/* pmucapabilities */
#define PCAP_REV_MASK 0x000000ff
diff --git a/drivers/staging/brcm80211/include/defs.h b/drivers/staging/brcm80211/include/defs.h
index 838424c..8e0c559 100644
--- a/drivers/staging/brcm80211/include/defs.h
+++ b/drivers/staging/brcm80211/include/defs.h
@@ -55,8 +55,10 @@
#define WL_NUMRATES 16 /* max # of rates in a rateset */
struct brcm_rateset {
- u32 count; /* # rates in this set */
- u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
+ /* # rates in this set */
+ u32 count;
+ /* rates in 500kbps units w/hi bit set if basic */
+ u8 rates[WL_NUMRATES];
};
#define BRCM_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NUL */
@@ -71,10 +73,12 @@
#define BRCM_GET_PHYLIST 180
/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+
#define WL_RADIO_SW_DISABLE (1<<0)
#define WL_RADIO_HW_DISABLE (1<<1)
#define WL_RADIO_MPC_DISABLE (1<<2)
-#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */
+/* some countries don't support any channel */
+#define WL_RADIO_COUNTRY_DISABLE (1<<3)
/* Override bit for SET_TXPWR. if set, ignore other level limits */
#define WL_TXPWR_OVERRIDE (1U<<31)
@@ -100,7 +104,9 @@
/*
* Sonics Configuration Space Registers.
*/
-#define SBCONFIGOFF 0xf00 /* core sbconfig regs are top 256bytes of regs */
+
+/* core sbconfig regs are top 256bytes of regs */
+#define SBCONFIGOFF 0xf00
/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
diff --git a/drivers/staging/brcm80211/include/soc.h b/drivers/staging/brcm80211/include/soc.h
index 6e5a705..f23edc5 100644
--- a/drivers/staging/brcm80211/include/soc.h
+++ b/drivers/staging/brcm80211/include/soc.h
@@ -81,9 +81,8 @@
#define DMEMS_CORE_ID 0x835 /* SDR/DDR1 memory controller core */
#define DEF_SHIM_COMP 0x837 /* SHIM component in ubus/6362 */
#define OOB_ROUTER_CORE_ID 0x367 /* OOB router core ID */
-#define DEF_AI_COMP 0xfff /* Default component, in ai chips it maps all
- * unused address ranges
- */
+/* Default component, in ai chips it maps all unused address ranges */
+#define DEF_AI_COMP 0xfff
/* Common core control flags */
#define SICF_BIST_EN 0x8000