ARM: dts: exynos: Enable HDMI for Arndale Octa board
* GPIO for HDMI hot plug detect
GPX3_7 is used. The HPD awareness is done when the GPIO is active high.
* Enable HDMI block in Exynos5420
HDMI VDD and PLL consume 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator
requires 1.8V LDO7 (PVDD_ANAIP_1V8).
* Support HDMI display data channel
I2C #2 is assigned for the HDMI DDC. It enables the EDID access.
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 39a3b81..d2ad48e 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -70,6 +70,15 @@
status = "disabled";
};
+&hdmi {
+ hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
+ vdd-supply = <&ldo6_reg>;
+ ddc = <&i2c_2>;
+ status = "okay";
+};
+
&hsi2c_4 {
status = "okay";
@@ -347,6 +356,10 @@
};
};
+&i2c_2 {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
broken-cd;