[media] rtl2832: improve slave TS control
Add callback parameter to select enable / disable slave TS and use
it when slave demod is in use.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
diff --git a/drivers/media/dvb-frontends/rtl2832.c b/drivers/media/dvb-frontends/rtl2832.c
index c2469fb..8c69711 100644
--- a/drivers/media/dvb-frontends/rtl2832.c
+++ b/drivers/media/dvb-frontends/rtl2832.c
@@ -347,6 +347,10 @@
dev_dbg(&client->dev, "\n");
+ ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
+ if (ret)
+ goto err;
+
for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) {
ret = rtl2832_wr_demod_reg(dev, rtl2832_initial_regs[i].reg,
rtl2832_initial_regs[i].value);
@@ -491,11 +495,6 @@
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe);
- /* PIP mode related */
- ret = rtl2832_bulk_write(client, 0x192, "\x00\x0f\xff", 3);
- if (ret)
- goto err;
-
/* If the frontend has get_if_frequency(), use it */
if (fe->ops.tuner_ops.get_if_frequency) {
u32 if_freq;
@@ -1081,37 +1080,46 @@
return dev->i2c_adapter_tuner;
}
-static int rtl2832_enable_slave_ts(struct i2c_client *client)
+static int rtl2832_slave_ts_ctrl(struct i2c_client *client, bool enable)
{
struct rtl2832_dev *dev = i2c_get_clientdata(client);
int ret;
- dev_dbg(&client->dev, "\n");
+ dev_dbg(&client->dev, "enable=%d\n", enable);
- ret = rtl2832_bulk_write(client, 0x10c, "\x5f\xff", 2);
- if (ret)
- goto err;
-
- ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x1);
- if (ret)
- goto err;
-
- ret = rtl2832_bulk_write(client, 0x0bc, "\x18", 1);
- if (ret)
- goto err;
-
- ret = rtl2832_bulk_write(client, 0x192, "\x7f\xf7\xff", 3);
- if (ret)
- goto err;
-
- /* soft reset */
- ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
- if (ret)
- goto err;
-
- ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
- if (ret)
- goto err;
+ if (enable) {
+ ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
+ if (ret)
+ goto err;
+ ret = rtl2832_bulk_write(client, 0x10c, "\x5f\xff", 2);
+ if (ret)
+ goto err;
+ ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x1);
+ if (ret)
+ goto err;
+ ret = rtl2832_bulk_write(client, 0x0bc, "\x18", 1);
+ if (ret)
+ goto err;
+ ret = rtl2832_bulk_write(client, 0x192, "\x7f\xf7\xff", 3);
+ if (ret)
+ goto err;
+ } else {
+ ret = rtl2832_bulk_write(client, 0x192, "\x00\x0f\xff", 3);
+ if (ret)
+ goto err;
+ ret = rtl2832_bulk_write(client, 0x0bc, "\x08", 1);
+ if (ret)
+ goto err;
+ ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x0);
+ if (ret)
+ goto err;
+ ret = rtl2832_bulk_write(client, 0x10c, "\x00\x00", 2);
+ if (ret)
+ goto err;
+ ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
+ if (ret)
+ goto err;
+ }
return 0;
err:
@@ -1267,7 +1275,7 @@
/* setup callbacks */
pdata->get_dvb_frontend = rtl2832_get_dvb_frontend;
pdata->get_i2c_adapter = rtl2832_get_i2c_adapter;
- pdata->enable_slave_ts = rtl2832_enable_slave_ts;
+ pdata->slave_ts_ctrl = rtl2832_slave_ts_ctrl;
pdata->pid_filter = rtl2832_pid_filter;
pdata->pid_filter_ctrl = rtl2832_pid_filter_ctrl;
pdata->bulk_read = rtl2832_bulk_read;