usb: phy: phy-msm-usb: Remove redundant extcon register/unregister
Since usb phy core has added common code to register or unregister
extcon device, then phy-msm-usb driver does not need its own
code to register/unregister extcon device, then remove them.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 93d9aaa..8fb86a5 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -146,17 +146,6 @@
};
/**
- * struct msm_usb_cable - structure for exteternal connector cable
- * state tracking
- * @nb: hold event notification callback
- * @conn: used for notification registration
- */
-struct msm_usb_cable {
- struct notifier_block nb;
- struct extcon_dev *extcon;
-};
-
-/**
* struct msm_otg: OTG driver data. Shared by HCD and DCD.
* @otg: USB OTG Transceiver structure.
* @pdata: otg device platform data.
@@ -215,9 +204,6 @@
bool manual_pullup;
- struct msm_usb_cable vbus;
- struct msm_usb_cable id;
-
struct gpio_desc *switch_gpio;
struct notifier_block reboot;
};
@@ -1612,8 +1598,8 @@
static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event,
void *ptr)
{
- struct msm_usb_cable *vbus = container_of(nb, struct msm_usb_cable, nb);
- struct msm_otg *motg = container_of(vbus, struct msm_otg, vbus);
+ struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb);
+ struct msm_otg *motg = container_of(usb_phy, struct msm_otg, phy);
if (event)
set_bit(B_SESS_VLD, &motg->inputs);
@@ -1636,8 +1622,8 @@
static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event,
void *ptr)
{
- struct msm_usb_cable *id = container_of(nb, struct msm_usb_cable, nb);
- struct msm_otg *motg = container_of(id, struct msm_otg, id);
+ struct usb_phy *usb_phy = container_of(nb, struct usb_phy, id_nb);
+ struct msm_otg *motg = container_of(usb_phy, struct msm_otg, phy);
if (event)
clear_bit(ID, &motg->inputs);
@@ -1652,7 +1638,6 @@
static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
{
struct msm_otg_platform_data *pdata;
- struct extcon_dev *ext_id, *ext_vbus;
struct device_node *node = pdev->dev.of_node;
struct property *prop;
int len, ret, words;
@@ -1708,54 +1693,6 @@
if (IS_ERR(motg->switch_gpio))
return PTR_ERR(motg->switch_gpio);
- ext_id = ERR_PTR(-ENODEV);
- ext_vbus = ERR_PTR(-ENODEV);
- if (of_property_read_bool(node, "extcon")) {
-
- /* Each one of them is not mandatory */
- ext_vbus = extcon_get_edev_by_phandle(&pdev->dev, 0);
- if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
- return PTR_ERR(ext_vbus);
-
- ext_id = extcon_get_edev_by_phandle(&pdev->dev, 1);
- if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
- return PTR_ERR(ext_id);
- }
-
- if (!IS_ERR(ext_vbus)) {
- motg->vbus.extcon = ext_vbus;
- motg->vbus.nb.notifier_call = msm_otg_vbus_notifier;
- ret = devm_extcon_register_notifier(&pdev->dev, ext_vbus,
- EXTCON_USB, &motg->vbus.nb);
- if (ret < 0) {
- dev_err(&pdev->dev, "register VBUS notifier failed\n");
- return ret;
- }
-
- ret = extcon_get_state(ext_vbus, EXTCON_USB);
- if (ret)
- set_bit(B_SESS_VLD, &motg->inputs);
- else
- clear_bit(B_SESS_VLD, &motg->inputs);
- }
-
- if (!IS_ERR(ext_id)) {
- motg->id.extcon = ext_id;
- motg->id.nb.notifier_call = msm_otg_id_notifier;
- ret = devm_extcon_register_notifier(&pdev->dev, ext_id,
- EXTCON_USB_HOST, &motg->id.nb);
- if (ret < 0) {
- dev_err(&pdev->dev, "register ID notifier failed\n");
- return ret;
- }
-
- ret = extcon_get_state(ext_id, EXTCON_USB_HOST);
- if (ret)
- clear_bit(ID, &motg->inputs);
- else
- set_bit(ID, &motg->inputs);
- }
-
prop = of_find_property(node, "qcom,phy-init-sequence", &len);
if (!prop || !len)
return 0;
@@ -1932,6 +1869,8 @@
phy->init = msm_phy_init;
phy->notify_disconnect = msm_phy_notify_disconnect;
phy->type = USB_PHY_TYPE_USB2;
+ phy->vbus_nb.notifier_call = msm_otg_vbus_notifier;
+ phy->id_nb.notifier_call = msm_otg_id_notifier;
phy->io_ops = &msm_otg_io_ops;
@@ -1947,6 +1886,18 @@
goto disable_ldo;
}
+ ret = extcon_get_state(phy->edev, EXTCON_USB);
+ if (ret)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+
+ ret = extcon_get_state(phy->id_edev, EXTCON_USB_HOST);
+ if (ret)
+ clear_bit(ID, &motg->inputs);
+ else
+ set_bit(ID, &motg->inputs);
+
platform_set_drvdata(pdev, motg);
device_init_wakeup(&pdev->dev, 1);