powerpc/eeh: sysfs entries lost
The sysfs entries are lost because of commit 2213fb1 ("powerpc/eeh:
Skip eeh sysfs when eeh is disabled"). That commit added condition
to create sysfs entries with EEH_ENABLED, which isn't populated
when trying to create sysfs entries on PowerNV platform during system
boot time. The patch fixes the issue by:
* Reoder EEH initialization functions so that they're same on
PowerNV/pSeries.
* Cache PE's primary bus by PowerNV platform instead of EEH core
to avoid kernel crash caused by the function reorder. Another
benefit with this is to avoid one eeh_probe_mode_dev() in EEH
core.
Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index fbd01eb..1dce071a 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -351,17 +351,6 @@
pe->config_addr = edev->config_addr;
/*
- * While doing PE reset, we probably hot-reset the
- * upstream bridge. However, the PCI devices including
- * the associated EEH devices might be removed when EEH
- * core is doing recovery. So that won't safe to retrieve
- * the bridge through downstream EEH device. We have to
- * trace the parent PCI bus, then the upstream bridge.
- */
- if (eeh_probe_mode_dev())
- pe->bus = eeh_dev_to_pci_dev(edev)->bus;
-
- /*
* Put the new EEH PE into hierarchy tree. If the parent
* can't be found, the newly created PE will be attached
* to PHB directly. Otherwise, we have to associate the
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 998bcc1..c3a5c2f 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -107,6 +107,7 @@
struct pnv_phb *phb = hose->private_data;
struct device_node *dn = pci_device_to_OF_node(dev);
struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+ int ret;
/*
* When probing the root bridge, which doesn't have any
@@ -143,7 +144,21 @@
edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);
/* Create PE */
- eeh_add_to_parent_pe(edev);
+ ret = eeh_add_to_parent_pe(edev);
+ if (ret) {
+ pr_warn("%s: Can't add PCI dev %s to parent PE (%d)\n",
+ __func__, pci_name(dev), ret);
+ return ret;
+ }
+
+ /*
+ * Cache the PE primary bus, which can't be fetched when
+ * full hotplug is in progress. In that case, all child
+ * PCI devices of the PE are expected to be removed prior
+ * to PE reset.
+ */
+ if (!edev->pe->bus)
+ edev->pe->bus = dev->bus;
/*
* Enable EEH explicitly so that we will do EEH check
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 9f28e18..fa3029a 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1145,8 +1145,8 @@
#ifdef CONFIG_EEH
eeh_probe_mode_set(EEH_PROBE_MODE_DEV);
- eeh_addr_cache_build();
eeh_init();
+ eeh_addr_cache_build();
#endif
}