| /* |
| * Extcon charger detection driver for Intel Cherrytrail Whiskey Cove PMIC |
| * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> |
| * |
| * Based on various non upstream patches to support the CHT Whiskey Cove PMIC: |
| * Copyright (C) 2013-2015 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #include <linux/extcon.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/intel_soc_pmic.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #define CHT_WC_PHYCTRL 0x5e07 |
| |
| #define CHT_WC_CHGRCTRL0 0x5e16 |
| #define CHT_WC_CHGRCTRL0_CHGRRESET BIT(0) |
| #define CHT_WC_CHGRCTRL0_EMRGCHREN BIT(1) |
| #define CHT_WC_CHGRCTRL0_EXTCHRDIS BIT(2) |
| #define CHT_WC_CHGRCTRL0_SWCONTROL BIT(3) |
| #define CHT_WC_CHGRCTRL0_TTLCK_MASK BIT(4) |
| #define CHT_WC_CHGRCTRL0_CCSM_OFF_MASK BIT(5) |
| #define CHT_WC_CHGRCTRL0_DBPOFF_MASK BIT(6) |
| #define CHT_WC_CHGRCTRL0_WDT_NOKICK BIT(7) |
| |
| #define CHT_WC_CHGRCTRL1 0x5e17 |
| |
| #define CHT_WC_USBSRC 0x5e29 |
| #define CHT_WC_USBSRC_STS_MASK GENMASK(1, 0) |
| #define CHT_WC_USBSRC_STS_SUCCESS 2 |
| #define CHT_WC_USBSRC_STS_FAIL 3 |
| #define CHT_WC_USBSRC_TYPE_SHIFT 2 |
| #define CHT_WC_USBSRC_TYPE_MASK GENMASK(5, 2) |
| #define CHT_WC_USBSRC_TYPE_NONE 0 |
| #define CHT_WC_USBSRC_TYPE_SDP 1 |
| #define CHT_WC_USBSRC_TYPE_DCP 2 |
| #define CHT_WC_USBSRC_TYPE_CDP 3 |
| #define CHT_WC_USBSRC_TYPE_ACA 4 |
| #define CHT_WC_USBSRC_TYPE_SE1 5 |
| #define CHT_WC_USBSRC_TYPE_MHL 6 |
| #define CHT_WC_USBSRC_TYPE_FLOAT_DP_DN 7 |
| #define CHT_WC_USBSRC_TYPE_OTHER 8 |
| #define CHT_WC_USBSRC_TYPE_DCP_EXTPHY 9 |
| |
| #define CHT_WC_PWRSRC_IRQ 0x6e03 |
| #define CHT_WC_PWRSRC_IRQ_MASK 0x6e0f |
| #define CHT_WC_PWRSRC_STS 0x6e1e |
| #define CHT_WC_PWRSRC_VBUS BIT(0) |
| #define CHT_WC_PWRSRC_DC BIT(1) |
| #define CHT_WC_PWRSRC_BAT BIT(2) |
| #define CHT_WC_PWRSRC_ID_GND BIT(3) |
| #define CHT_WC_PWRSRC_ID_FLOAT BIT(4) |
| |
| enum cht_wc_usb_id { |
| USB_ID_OTG, |
| USB_ID_GND, |
| USB_ID_FLOAT, |
| USB_RID_A, |
| USB_RID_B, |
| USB_RID_C, |
| }; |
| |
| enum cht_wc_mux_select { |
| MUX_SEL_PMIC = 0, |
| MUX_SEL_SOC, |
| }; |
| |
| static const unsigned int cht_wc_extcon_cables[] = { |
| EXTCON_USB, |
| EXTCON_USB_HOST, |
| EXTCON_CHG_USB_SDP, |
| EXTCON_CHG_USB_CDP, |
| EXTCON_CHG_USB_DCP, |
| EXTCON_CHG_USB_ACA, |
| EXTCON_NONE, |
| }; |
| |
| struct cht_wc_extcon_data { |
| struct device *dev; |
| struct regmap *regmap; |
| struct extcon_dev *edev; |
| unsigned int previous_cable; |
| }; |
| |
| static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts) |
| { |
| if (pwrsrc_sts & CHT_WC_PWRSRC_ID_GND) |
| return USB_ID_GND; |
| if (pwrsrc_sts & CHT_WC_PWRSRC_ID_FLOAT) |
| return USB_ID_FLOAT; |
| |
| /* |
| * Once we have iio support for the gpadc we should read the USBID |
| * gpadc channel here and determine ACA role based on that. |
| */ |
| return USB_ID_FLOAT; |
| } |
| |
| static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext) |
| { |
| int ret, usbsrc, status; |
| unsigned long timeout; |
| |
| /* Charger detection can take upto 600ms, wait 800ms max. */ |
| timeout = jiffies + msecs_to_jiffies(800); |
| do { |
| ret = regmap_read(ext->regmap, CHT_WC_USBSRC, &usbsrc); |
| if (ret) { |
| dev_err(ext->dev, "Error reading usbsrc: %d\n", ret); |
| return ret; |
| } |
| |
| status = usbsrc & CHT_WC_USBSRC_STS_MASK; |
| if (status == CHT_WC_USBSRC_STS_SUCCESS || |
| status == CHT_WC_USBSRC_STS_FAIL) |
| break; |
| |
| msleep(50); /* Wait a bit before retrying */ |
| } while (time_before(jiffies, timeout)); |
| |
| if (status != CHT_WC_USBSRC_STS_SUCCESS) { |
| if (status == CHT_WC_USBSRC_STS_FAIL) |
| dev_warn(ext->dev, "Could not detect charger type\n"); |
| else |
| dev_warn(ext->dev, "Timeout detecting charger type\n"); |
| return EXTCON_CHG_USB_SDP; /* Save fallback */ |
| } |
| |
| usbsrc = (usbsrc & CHT_WC_USBSRC_TYPE_MASK) >> CHT_WC_USBSRC_TYPE_SHIFT; |
| switch (usbsrc) { |
| default: |
| dev_warn(ext->dev, |
| "Unhandled charger type %d, defaulting to SDP\n", |
| ret); |
| /* Fall through, treat as SDP */ |
| case CHT_WC_USBSRC_TYPE_SDP: |
| case CHT_WC_USBSRC_TYPE_FLOAT_DP_DN: |
| case CHT_WC_USBSRC_TYPE_OTHER: |
| return EXTCON_CHG_USB_SDP; |
| case CHT_WC_USBSRC_TYPE_CDP: |
| return EXTCON_CHG_USB_CDP; |
| case CHT_WC_USBSRC_TYPE_DCP: |
| case CHT_WC_USBSRC_TYPE_DCP_EXTPHY: |
| case CHT_WC_USBSRC_TYPE_MHL: /* MHL2+ delivers upto 2A, treat as DCP */ |
| return EXTCON_CHG_USB_DCP; |
| case CHT_WC_USBSRC_TYPE_ACA: |
| return EXTCON_CHG_USB_ACA; |
| } |
| } |
| |
| static void cht_wc_extcon_set_phymux(struct cht_wc_extcon_data *ext, u8 state) |
| { |
| int ret; |
| |
| ret = regmap_write(ext->regmap, CHT_WC_PHYCTRL, state); |
| if (ret) |
| dev_err(ext->dev, "Error writing phyctrl: %d\n", ret); |
| } |
| |
| /* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */ |
| static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext, |
| unsigned int cable, bool state) |
| { |
| extcon_set_state_sync(ext->edev, cable, state); |
| if (cable == EXTCON_CHG_USB_SDP) |
| extcon_set_state_sync(ext->edev, EXTCON_USB, state); |
| } |
| |
| static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext) |
| { |
| int ret, pwrsrc_sts, id; |
| unsigned int cable = EXTCON_NONE; |
| |
| ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts); |
| if (ret) { |
| dev_err(ext->dev, "Error reading pwrsrc status: %d\n", ret); |
| return; |
| } |
| |
| id = cht_wc_extcon_get_id(ext, pwrsrc_sts); |
| if (id == USB_ID_GND) { |
| /* The 5v boost causes a false VBUS / SDP detect, skip */ |
| goto charger_det_done; |
| } |
| |
| /* Plugged into a host/charger or not connected? */ |
| if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) { |
| /* Route D+ and D- to PMIC for future charger detection */ |
| cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC); |
| goto set_state; |
| } |
| |
| ret = cht_wc_extcon_get_charger(ext); |
| if (ret >= 0) |
| cable = ret; |
| |
| charger_det_done: |
| /* Route D+ and D- to SoC for the host or gadget controller */ |
| cht_wc_extcon_set_phymux(ext, MUX_SEL_SOC); |
| |
| set_state: |
| if (cable != ext->previous_cable) { |
| cht_wc_extcon_set_state(ext, cable, true); |
| cht_wc_extcon_set_state(ext, ext->previous_cable, false); |
| ext->previous_cable = cable; |
| } |
| |
| extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, |
| id == USB_ID_GND || id == USB_RID_A); |
| } |
| |
| static irqreturn_t cht_wc_extcon_isr(int irq, void *data) |
| { |
| struct cht_wc_extcon_data *ext = data; |
| int ret, irqs; |
| |
| ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_IRQ, &irqs); |
| if (ret) { |
| dev_err(ext->dev, "Error reading irqs: %d\n", ret); |
| return IRQ_NONE; |
| } |
| |
| cht_wc_extcon_pwrsrc_event(ext); |
| |
| ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ, irqs); |
| if (ret) { |
| dev_err(ext->dev, "Error writing irqs: %d\n", ret); |
| return IRQ_NONE; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable) |
| { |
| int ret, mask, val; |
| |
| mask = CHT_WC_CHGRCTRL0_SWCONTROL | CHT_WC_CHGRCTRL0_CCSM_OFF_MASK; |
| val = enable ? mask : 0; |
| ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL0, mask, val); |
| if (ret) |
| dev_err(ext->dev, "Error setting sw control: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int cht_wc_extcon_probe(struct platform_device *pdev) |
| { |
| struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); |
| struct cht_wc_extcon_data *ext; |
| int irq, ret; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| ext = devm_kzalloc(&pdev->dev, sizeof(*ext), GFP_KERNEL); |
| if (!ext) |
| return -ENOMEM; |
| |
| ext->dev = &pdev->dev; |
| ext->regmap = pmic->regmap; |
| ext->previous_cable = EXTCON_NONE; |
| |
| /* Initialize extcon device */ |
| ext->edev = devm_extcon_dev_allocate(ext->dev, cht_wc_extcon_cables); |
| if (IS_ERR(ext->edev)) |
| return PTR_ERR(ext->edev); |
| |
| /* Enable sw control */ |
| ret = cht_wc_extcon_sw_control(ext, true); |
| if (ret) |
| return ret; |
| |
| /* Register extcon device */ |
| ret = devm_extcon_dev_register(ext->dev, ext->edev); |
| if (ret) { |
| dev_err(ext->dev, "Error registering extcon device: %d\n", ret); |
| goto disable_sw_control; |
| } |
| |
| /* Route D+ and D- to PMIC for initial charger detection */ |
| cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC); |
| |
| /* Get initial state */ |
| cht_wc_extcon_pwrsrc_event(ext); |
| |
| ret = devm_request_threaded_irq(ext->dev, irq, NULL, cht_wc_extcon_isr, |
| IRQF_ONESHOT, pdev->name, ext); |
| if (ret) { |
| dev_err(ext->dev, "Error requesting interrupt: %d\n", ret); |
| goto disable_sw_control; |
| } |
| |
| /* Unmask irqs */ |
| ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ_MASK, |
| (int)~(CHT_WC_PWRSRC_VBUS | CHT_WC_PWRSRC_ID_GND | |
| CHT_WC_PWRSRC_ID_FLOAT)); |
| if (ret) { |
| dev_err(ext->dev, "Error writing irq-mask: %d\n", ret); |
| goto disable_sw_control; |
| } |
| |
| platform_set_drvdata(pdev, ext); |
| |
| return 0; |
| |
| disable_sw_control: |
| cht_wc_extcon_sw_control(ext, false); |
| return ret; |
| } |
| |
| static int cht_wc_extcon_remove(struct platform_device *pdev) |
| { |
| struct cht_wc_extcon_data *ext = platform_get_drvdata(pdev); |
| |
| cht_wc_extcon_sw_control(ext, false); |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id cht_wc_extcon_table[] = { |
| { .name = "cht_wcove_pwrsrc" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(platform, cht_wc_extcon_table); |
| |
| static struct platform_driver cht_wc_extcon_driver = { |
| .probe = cht_wc_extcon_probe, |
| .remove = cht_wc_extcon_remove, |
| .id_table = cht_wc_extcon_table, |
| .driver = { |
| .name = "cht_wcove_pwrsrc", |
| }, |
| }; |
| module_platform_driver(cht_wc_extcon_driver); |
| |
| MODULE_DESCRIPTION("Intel Cherrytrail Whiskey Cove PMIC extcon driver"); |
| MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); |
| MODULE_LICENSE("GPL v2"); |