arch/x86/platform/intel-mid/pwr.c - kernel/msm-4.19 - Gitiles

 /*
  * Intel MID Power Management Unit (PWRMU) device driver
  *
  * Copyright (C) 2016, Intel Corporation
  *
  * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * Intel MID Power Management Unit device driver handles the South Complex PCI
  * devices such as GPDMA, SPI, I2C, PWM, and so on. By default PCI core
  * modifies bits in PMCSR register in the PCI configuration space. This is not
  * enough on some SoCs like Intel Tangier. In such case PCI core sets a new
  * power state of the device in question through a PM hook registered in struct
  * pci_platform_pm_ops (see drivers/pci/pci-mid.c).
  */

 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/pci.h>

 #include <asm/intel-mid.h>

 /* Registers */
 #define PM_STS			0x00
 #define PM_CMD			0x04
 #define PM_ICS			0x08
 #define PM_WKC(x)		(0x10 + (x) * 4)
 #define PM_WKS(x)		(0x18 + (x) * 4)
 #define PM_SSC(x)		(0x20 + (x) * 4)
 #define PM_SSS(x)		(0x30 + (x) * 4)

 /* Bits in PM_STS */
 #define PM_STS_BUSY		(1 << 8)

 /* Bits in PM_CMD */
 #define PM_CMD_CMD(x)		((x) << 0)
 #define PM_CMD_IOC		(1 << 8)
 #define PM_CMD_CM_NOP		(0 << 9)
 #define PM_CMD_CM_IMMEDIATE	(1 << 9)
 #define PM_CMD_CM_DELAY		(2 << 9)
 #define PM_CMD_CM_TRIGGER	(3 << 9)

 /* System states */
 #define PM_CMD_SYS_STATE_S5	(5 << 16)

 /* Trigger variants */
 #define PM_CMD_CFG_TRIGGER_NC	(3 << 19)

 /* Message to wait for TRIGGER_NC case */
 #define TRIGGER_NC_MSG_2	(2 << 22)

 /* List of commands */
 #define CMD_SET_CFG		0x01

 /* Bits in PM_ICS */
 #define PM_ICS_INT_STATUS(x)	((x) & 0xff)
 #define PM_ICS_IE		(1 << 8)
 #define PM_ICS_IP		(1 << 9)
 #define PM_ICS_SW_INT_STS	(1 << 10)

 /* List of interrupts */
 #define INT_INVALID		0
 #define INT_CMD_COMPLETE	1
 #define INT_CMD_ERR		2
 #define INT_WAKE_EVENT		3
 #define INT_LSS_POWER_ERR	4
 #define INT_S0iX_MSG_ERR	5
 #define INT_NO_C6		6
 #define INT_TRIGGER_ERR		7
 #define INT_INACTIVITY		8

 /* South Complex devices */
 #define LSS_MAX_SHARED_DEVS	4
 #define LSS_MAX_DEVS		64

 #define LSS_WS_BITS		1	/* wake state width */
 #define LSS_PWS_BITS		2	/* power state width */

 /* Supported device IDs */
 #define PCI_DEVICE_ID_PENWELL	0x0828
 #define PCI_DEVICE_ID_TANGIER	0x11a1

 struct mid_pwr_dev {
 	struct pci_dev *pdev;
 	pci_power_t state;
 };

 struct mid_pwr {
 	struct device *dev;
 	void __iomem *regs;
 	int irq;
 	bool available;

 	struct mutex lock;
 	struct mid_pwr_dev lss[LSS_MAX_DEVS][LSS_MAX_SHARED_DEVS];
 };

 static struct mid_pwr *midpwr;

 static u32 mid_pwr_get_state(struct mid_pwr *pwr, int reg)
 {
 	return readl(pwr->regs + PM_SSS(reg));
 }

 static void mid_pwr_set_state(struct mid_pwr *pwr, int reg, u32 value)
 {
 	writel(value, pwr->regs + PM_SSC(reg));
 }

 static void mid_pwr_set_wake(struct mid_pwr *pwr, int reg, u32 value)
 {
 	writel(value, pwr->regs + PM_WKC(reg));
 }

 static void mid_pwr_interrupt_disable(struct mid_pwr *pwr)
 {
 	writel(~PM_ICS_IE, pwr->regs + PM_ICS);
 }

 static bool mid_pwr_is_busy(struct mid_pwr *pwr)
 {
 	return !!(readl(pwr->regs + PM_STS) & PM_STS_BUSY);
 }

 /* Wait 500ms that the latest PWRMU command finished */
 static int mid_pwr_wait(struct mid_pwr *pwr)
 {
 	unsigned int count = 500000;
 	bool busy;

 	do {
 		busy = mid_pwr_is_busy(pwr);
 		if (!busy)
 			return 0;
 		udelay(1);
 	} while (--count);

 	return -EBUSY;
 }

 static int mid_pwr_wait_for_cmd(struct mid_pwr *pwr, u8 cmd)
 {
 	writel(PM_CMD_CMD(cmd) | PM_CMD_CM_IMMEDIATE, pwr->regs + PM_CMD);
 	return mid_pwr_wait(pwr);
 }

 static int __update_power_state(struct mid_pwr *pwr, int reg, int bit, int new)
 {
 	int curstate;
 	u32 power;
 	int ret;

 	/* Check if the device is already in desired state */
 	power = mid_pwr_get_state(pwr, reg);
 	curstate = (power >> bit) & 3;
 	if (curstate == new)
 		return 0;

 	/* Update the power state */
 	mid_pwr_set_state(pwr, reg, (power & ~(3 << bit)) | (new << bit));

 	/* Send command to SCU */
 	ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG);
 	if (ret)
 		return ret;

 	/* Check if the device is already in desired state */
 	power = mid_pwr_get_state(pwr, reg);
 	curstate = (power >> bit) & 3;
 	if (curstate != new)
 		return -EAGAIN;

 	return 0;
 }

 static pci_power_t __find_weakest_power_state(struct mid_pwr_dev *lss,
 					      struct pci_dev *pdev,
 					      pci_power_t state)
 {
 	pci_power_t weakest = PCI_D3hot;
 	unsigned int j;

 	/* Find device in cache or first free cell */
 	for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) {
 		if (lss[j].pdev == pdev || !lss[j].pdev)
 			break;
 	}

 	/* Store the desired state in cache */
 	if (j < LSS_MAX_SHARED_DEVS) {
 		lss[j].pdev = pdev;
 		lss[j].state = state;
 	} else {
 		dev_WARN(&pdev->dev, "No room for device in PWRMU LSS cache\n");
 		weakest = state;
 	}

 	/* Find the power state we may use */
 	for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) {
 		if (lss[j].state < weakest)
 			weakest = lss[j].state;
 	}

 	return weakest;
 }

 static int __set_power_state(struct mid_pwr *pwr, struct pci_dev *pdev,
 			     pci_power_t state, int id, int reg, int bit)
 {
 	const char *name;
 	int ret;

 	state = __find_weakest_power_state(pwr->lss[id], pdev, state);
 	name = pci_power_name(state);

 	ret = __update_power_state(pwr, reg, bit, (__force int)state);
 	if (ret) {
 		dev_warn(&pdev->dev, "Can't set power state %s: %d\n", name, ret);
 		return ret;
 	}

 	dev_vdbg(&pdev->dev, "Set power state %s\n", name);
 	return 0;
 }

 static int mid_pwr_set_power_state(struct mid_pwr *pwr, struct pci_dev *pdev,
 				   pci_power_t state)
 {
 	int id, reg, bit;
 	int ret;

 	id = intel_mid_pwr_get_lss_id(pdev);
 	if (id < 0)
 		return id;

 	reg = (id * LSS_PWS_BITS) / 32;
 	bit = (id * LSS_PWS_BITS) % 32;

 	/* We support states between PCI_D0 and PCI_D3hot */
 	if (state < PCI_D0)
 		state = PCI_D0;
 	if (state > PCI_D3hot)
 		state = PCI_D3hot;

 	mutex_lock(&pwr->lock);
 	ret = __set_power_state(pwr, pdev, state, id, reg, bit);
 	mutex_unlock(&pwr->lock);
 	return ret;
 }

 int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state)
 {
 	struct mid_pwr *pwr = midpwr;
 	int ret = 0;

 	might_sleep();

 	if (pwr && pwr->available)
 		ret = mid_pwr_set_power_state(pwr, pdev, state);
 	dev_vdbg(&pdev->dev, "set_power_state() returns %d\n", ret);

 	return 0;
 }
 EXPORT_SYMBOL_GPL(intel_mid_pci_set_power_state);

 void intel_mid_pwr_power_off(void)
 {
 	struct mid_pwr *pwr = midpwr;
 	u32 cmd = PM_CMD_SYS_STATE_S5 |
 		  PM_CMD_CMD(CMD_SET_CFG) |
 		  PM_CMD_CM_TRIGGER |
 		  PM_CMD_CFG_TRIGGER_NC |
 		  TRIGGER_NC_MSG_2;

 	/* Send command to SCU */
 	writel(cmd, pwr->regs + PM_CMD);
 	mid_pwr_wait(pwr);
 }

 int intel_mid_pwr_get_lss_id(struct pci_dev *pdev)
 {
 	int vndr;
 	u8 id;

 	/*
 	 * Mapping to PWRMU index is kept in the Logical SubSystem ID byte of
 	 * Vendor capability.
 	 */
 	vndr = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
 	if (!vndr)
 		return -EINVAL;

 	/* Read the Logical SubSystem ID byte */
 	pci_read_config_byte(pdev, vndr + INTEL_MID_PWR_LSS_OFFSET, &id);
 	if (!(id & INTEL_MID_PWR_LSS_TYPE))
 		return -ENODEV;

 	id &= ~INTEL_MID_PWR_LSS_TYPE;
 	if (id >= LSS_MAX_DEVS)
 		return -ERANGE;

 	return id;
 }

 static irqreturn_t mid_pwr_irq_handler(int irq, void *dev_id)
 {
 	struct mid_pwr *pwr = dev_id;
 	u32 ics;

 	ics = readl(pwr->regs + PM_ICS);
 	if (!(ics & PM_ICS_IP))
 		return IRQ_NONE;

 	writel(ics | PM_ICS_IP, pwr->regs + PM_ICS);

 	dev_warn(pwr->dev, "Unexpected IRQ: %#x\n", PM_ICS_INT_STATUS(ics));
 	return IRQ_HANDLED;
 }

 struct mid_pwr_device_info {
 	int (*set_initial_state)(struct mid_pwr *pwr);
 };

 static int mid_pwr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct mid_pwr_device_info *info = (void *)id->driver_data;
 	struct device *dev = &pdev->dev;
 	struct mid_pwr *pwr;
 	int ret;

 	ret = pcim_enable_device(pdev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "error: could not enable device\n");
 		return ret;
 	}

 	ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
 	if (ret) {
 		dev_err(&pdev->dev, "I/O memory remapping failed\n");
 		return ret;
 	}

 	pwr = devm_kzalloc(dev, sizeof(*pwr), GFP_KERNEL);
 	if (!pwr)
 		return -ENOMEM;

 	pwr->dev = dev;
 	pwr->regs = pcim_iomap_table(pdev)[0];
 	pwr->irq = pdev->irq;

 	mutex_init(&pwr->lock);

 	/* Disable interrupts */
 	mid_pwr_interrupt_disable(pwr);

 	if (info && info->set_initial_state) {
 		ret = info->set_initial_state(pwr);
 		if (ret)
 			dev_warn(dev, "Can't set initial state: %d\n", ret);
 	}

 	ret = devm_request_irq(dev, pdev->irq, mid_pwr_irq_handler,
 			       IRQF_NO_SUSPEND, pci_name(pdev), pwr);
 	if (ret)
 		return ret;

 	pwr->available = true;
 	midpwr = pwr;

 	pci_set_drvdata(pdev, pwr);
 	return 0;
 }

 static int mid_set_initial_state(struct mid_pwr *pwr, const u32 *states)
 {
 	unsigned int i, j;
 	int ret;

 	/*
 	 * Enable wake events.
 	 *
 	 * PWRMU supports up to 32 sources for wake up the system. Ungate them
 	 * all here.
 	 */
 	mid_pwr_set_wake(pwr, 0, 0xffffffff);
 	mid_pwr_set_wake(pwr, 1, 0xffffffff);

 	/*
 	 * Power off South Complex devices.
 	 *
 	 * There is a map (see a note below) of 64 devices with 2 bits per each
 	 * on 32-bit HW registers. The following calls set all devices to one
 	 * known initial state, i.e. PCI_D3hot. This is done in conjunction
 	 * with PMCSR setting in arch/x86/pci/intel_mid_pci.c.
 	 *
 	 * NOTE: The actual device mapping is provided by a platform at run
 	 * time using vendor capability of PCI configuration space.
 	 */
 	mid_pwr_set_state(pwr, 0, states[0]);
 	mid_pwr_set_state(pwr, 1, states[1]);
 	mid_pwr_set_state(pwr, 2, states[2]);
 	mid_pwr_set_state(pwr, 3, states[3]);

 	/* Send command to SCU */
 	ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG);
 	if (ret)
 		return ret;

 	for (i = 0; i < LSS_MAX_DEVS; i++) {
 		for (j = 0; j < LSS_MAX_SHARED_DEVS; j++)
 			pwr->lss[i][j].state = PCI_D3hot;
 	}

 	return 0;
 }

 static int pnw_set_initial_state(struct mid_pwr *pwr)
 {
 	/* On Penwell SRAM must stay powered on */
 	const u32 states[] = {
 		0xf00fffff,		/* PM_SSC(0) */
 		0xffffffff,		/* PM_SSC(1) */
 		0xffffffff,		/* PM_SSC(2) */
 		0xffffffff,		/* PM_SSC(3) */
 	};
 	return mid_set_initial_state(pwr, states);
 }

 static int tng_set_initial_state(struct mid_pwr *pwr)
 {
 	const u32 states[] = {
 		0xffffffff,		/* PM_SSC(0) */
 		0xffffffff,		/* PM_SSC(1) */
 		0xffffffff,		/* PM_SSC(2) */
 		0xffffffff,		/* PM_SSC(3) */
 	};
 	return mid_set_initial_state(pwr, states);
 }

 static const struct mid_pwr_device_info pnw_info = {
 	.set_initial_state = pnw_set_initial_state,
 };

 static const struct mid_pwr_device_info tng_info = {
 	.set_initial_state = tng_set_initial_state,
 };

 /* This table should be in sync with the one in drivers/pci/pci-mid.c */
 static const struct pci_device_id mid_pwr_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&pnw_info },
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&tng_info },
 	{}
 };

 static struct pci_driver mid_pwr_pci_driver = {
 	.name		= "intel_mid_pwr",
 	.probe		= mid_pwr_probe,
 	.id_table	= mid_pwr_pci_ids,
 };

 builtin_pci_driver(mid_pwr_pci_driver);
	/*
	* Intel MID Power Management Unit (PWRMU) device driver
	*
	* Copyright (C) 2016, Intel Corporation
	*
	* Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* Intel MID Power Management Unit device driver handles the South Complex PCI
	* devices such as GPDMA, SPI, I2C, PWM, and so on. By default PCI core
	* modifies bits in PMCSR register in the PCI configuration space. This is not
	* enough on some SoCs like Intel Tangier. In such case PCI core sets a new
	* power state of the device in question through a PM hook registered in struct
	* pci_platform_pm_ops (see drivers/pci/pci-mid.c).
	*/

	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

	#include <linux/delay.h>
	#include <linux/errno.h>
	#include <linux/interrupt.h>
	#include <linux/kernel.h>
	#include <linux/export.h>
	#include <linux/mutex.h>
	#include <linux/pci.h>

	#include <asm/intel-mid.h>

	/* Registers */
	#define PM_STS 0x00
	#define PM_CMD 0x04
	#define PM_ICS 0x08
	#define PM_WKC(x) (0x10 + (x) * 4)
	#define PM_WKS(x) (0x18 + (x) * 4)
	#define PM_SSC(x) (0x20 + (x) * 4)
	#define PM_SSS(x) (0x30 + (x) * 4)

	/* Bits in PM_STS */
	#define PM_STS_BUSY (1 << 8)

	/* Bits in PM_CMD */
	#define PM_CMD_CMD(x) ((x) << 0)
	#define PM_CMD_IOC (1 << 8)
	#define PM_CMD_CM_NOP (0 << 9)
	#define PM_CMD_CM_IMMEDIATE (1 << 9)
	#define PM_CMD_CM_DELAY (2 << 9)
	#define PM_CMD_CM_TRIGGER (3 << 9)

	/* System states */
	#define PM_CMD_SYS_STATE_S5 (5 << 16)

	/* Trigger variants */
	#define PM_CMD_CFG_TRIGGER_NC (3 << 19)

	/* Message to wait for TRIGGER_NC case */
	#define TRIGGER_NC_MSG_2 (2 << 22)

	/* List of commands */
	#define CMD_SET_CFG 0x01

	/* Bits in PM_ICS */
	#define PM_ICS_INT_STATUS(x) ((x) & 0xff)
	#define PM_ICS_IE (1 << 8)
	#define PM_ICS_IP (1 << 9)
	#define PM_ICS_SW_INT_STS (1 << 10)

	/* List of interrupts */
	#define INT_INVALID 0
	#define INT_CMD_COMPLETE 1
	#define INT_CMD_ERR 2
	#define INT_WAKE_EVENT 3
	#define INT_LSS_POWER_ERR 4
	#define INT_S0iX_MSG_ERR 5
	#define INT_NO_C6 6
	#define INT_TRIGGER_ERR 7
	#define INT_INACTIVITY 8

	/* South Complex devices */
	#define LSS_MAX_SHARED_DEVS 4
	#define LSS_MAX_DEVS 64

	#define LSS_WS_BITS 1 /* wake state width */
	#define LSS_PWS_BITS 2 /* power state width */

	/* Supported device IDs */
	#define PCI_DEVICE_ID_PENWELL 0x0828
	#define PCI_DEVICE_ID_TANGIER 0x11a1

	struct mid_pwr_dev {
	struct pci_dev *pdev;
	pci_power_t state;
	};

	struct mid_pwr {
	struct device *dev;
	void __iomem *regs;
	int irq;
	bool available;

	struct mutex lock;
	struct mid_pwr_dev lss[LSS_MAX_DEVS][LSS_MAX_SHARED_DEVS];
	};

	static struct mid_pwr *midpwr;

	static u32 mid_pwr_get_state(struct mid_pwr *pwr, int reg)
	{
	return readl(pwr->regs + PM_SSS(reg));
	}

	static void mid_pwr_set_state(struct mid_pwr *pwr, int reg, u32 value)
	{
	writel(value, pwr->regs + PM_SSC(reg));
	}

	static void mid_pwr_set_wake(struct mid_pwr *pwr, int reg, u32 value)
	{
	writel(value, pwr->regs + PM_WKC(reg));
	}

	static void mid_pwr_interrupt_disable(struct mid_pwr *pwr)
	{
	writel(~PM_ICS_IE, pwr->regs + PM_ICS);
	}

	static bool mid_pwr_is_busy(struct mid_pwr *pwr)
	{
	return !!(readl(pwr->regs + PM_STS) & PM_STS_BUSY);
	}

	/* Wait 500ms that the latest PWRMU command finished */
	static int mid_pwr_wait(struct mid_pwr *pwr)
	{
	unsigned int count = 500000;
	bool busy;

	do {
	busy = mid_pwr_is_busy(pwr);
	if (!busy)
	return 0;
	udelay(1);
	} while (--count);

	return -EBUSY;
	}

	static int mid_pwr_wait_for_cmd(struct mid_pwr *pwr, u8 cmd)
	{
	writel(PM_CMD_CMD(cmd) \| PM_CMD_CM_IMMEDIATE, pwr->regs + PM_CMD);
	return mid_pwr_wait(pwr);
	}

	static int __update_power_state(struct mid_pwr *pwr, int reg, int bit, int new)
	{
	int curstate;
	u32 power;
	int ret;

	/* Check if the device is already in desired state */
	power = mid_pwr_get_state(pwr, reg);
	curstate = (power >> bit) & 3;
	if (curstate == new)
	return 0;

	/* Update the power state */
	mid_pwr_set_state(pwr, reg, (power & ~(3 << bit)) \| (new << bit));

	/* Send command to SCU */
	ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG);
	if (ret)
	return ret;

	/* Check if the device is already in desired state */
	power = mid_pwr_get_state(pwr, reg);
	curstate = (power >> bit) & 3;
	if (curstate != new)
	return -EAGAIN;

	return 0;
	}

	static pci_power_t __find_weakest_power_state(struct mid_pwr_dev *lss,
	struct pci_dev *pdev,
	pci_power_t state)
	{
	pci_power_t weakest = PCI_D3hot;
	unsigned int j;

	/* Find device in cache or first free cell */
	for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) {
	if (lss[j].pdev == pdev \|\| !lss[j].pdev)
	break;
	}

	/* Store the desired state in cache */
	if (j < LSS_MAX_SHARED_DEVS) {
	lss[j].pdev = pdev;
	lss[j].state = state;
	} else {
	dev_WARN(&pdev->dev, "No room for device in PWRMU LSS cache\n");
	weakest = state;
	}

	/* Find the power state we may use */
	for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) {
	if (lss[j].state < weakest)
	weakest = lss[j].state;
	}

	return weakest;
	}

	static int __set_power_state(struct mid_pwr pwr, struct pci_dev pdev,
	pci_power_t state, int id, int reg, int bit)
	{
	const char *name;
	int ret;

	state = __find_weakest_power_state(pwr->lss[id], pdev, state);
	name = pci_power_name(state);

	ret = __update_power_state(pwr, reg, bit, (__force int)state);
	if (ret) {
	dev_warn(&pdev->dev, "Can't set power state %s: %d\n", name, ret);
	return ret;
	}

	dev_vdbg(&pdev->dev, "Set power state %s\n", name);
	return 0;
	}

	static int mid_pwr_set_power_state(struct mid_pwr pwr, struct pci_dev pdev,
	pci_power_t state)
	{
	int id, reg, bit;
	int ret;

	id = intel_mid_pwr_get_lss_id(pdev);
	if (id < 0)
	return id;

	reg = (id * LSS_PWS_BITS) / 32;
	bit = (id * LSS_PWS_BITS) % 32;

	/* We support states between PCI_D0 and PCI_D3hot */
	if (state < PCI_D0)
	state = PCI_D0;
	if (state > PCI_D3hot)
	state = PCI_D3hot;

	mutex_lock(&pwr->lock);
	ret = __set_power_state(pwr, pdev, state, id, reg, bit);
	mutex_unlock(&pwr->lock);
	return ret;
	}

	int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state)
	{
	struct mid_pwr *pwr = midpwr;
	int ret = 0;

	might_sleep();

	if (pwr && pwr->available)
	ret = mid_pwr_set_power_state(pwr, pdev, state);
	dev_vdbg(&pdev->dev, "set_power_state() returns %d\n", ret);

	return 0;
	}
	EXPORT_SYMBOL_GPL(intel_mid_pci_set_power_state);

	void intel_mid_pwr_power_off(void)
	{
	struct mid_pwr *pwr = midpwr;
	u32 cmd = PM_CMD_SYS_STATE_S5 \|
	PM_CMD_CMD(CMD_SET_CFG) \|
	PM_CMD_CM_TRIGGER \|
	PM_CMD_CFG_TRIGGER_NC \|
	TRIGGER_NC_MSG_2;

	/* Send command to SCU */
	writel(cmd, pwr->regs + PM_CMD);
	mid_pwr_wait(pwr);
	}

	int intel_mid_pwr_get_lss_id(struct pci_dev *pdev)
	{
	int vndr;
	u8 id;

	/*
	* Mapping to PWRMU index is kept in the Logical SubSystem ID byte of
	* Vendor capability.
	*/
	vndr = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
	if (!vndr)
	return -EINVAL;

	/* Read the Logical SubSystem ID byte */
	pci_read_config_byte(pdev, vndr + INTEL_MID_PWR_LSS_OFFSET, &id);
	if (!(id & INTEL_MID_PWR_LSS_TYPE))
	return -ENODEV;

	id &= ~INTEL_MID_PWR_LSS_TYPE;
	if (id >= LSS_MAX_DEVS)
	return -ERANGE;

	return id;
	}

	static irqreturn_t mid_pwr_irq_handler(int irq, void *dev_id)
	{
	struct mid_pwr *pwr = dev_id;
	u32 ics;

	ics = readl(pwr->regs + PM_ICS);
	if (!(ics & PM_ICS_IP))
	return IRQ_NONE;

	writel(ics \| PM_ICS_IP, pwr->regs + PM_ICS);

	dev_warn(pwr->dev, "Unexpected IRQ: %#x\n", PM_ICS_INT_STATUS(ics));
	return IRQ_HANDLED;
	}

	struct mid_pwr_device_info {
	int (set_initial_state)(struct mid_pwr pwr);
	};

	static int mid_pwr_probe(struct pci_dev pdev, const struct pci_device_id id)
	{
	struct mid_pwr_device_info info = (void )id->driver_data;
	struct device *dev = &pdev->dev;
	struct mid_pwr *pwr;
	int ret;

	ret = pcim_enable_device(pdev);
	if (ret < 0) {
	dev_err(&pdev->dev, "error: could not enable device\n");
	return ret;
	}

	ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
	if (ret) {
	dev_err(&pdev->dev, "I/O memory remapping failed\n");
	return ret;
	}

	pwr = devm_kzalloc(dev, sizeof(*pwr), GFP_KERNEL);
	if (!pwr)
	return -ENOMEM;

	pwr->dev = dev;
	pwr->regs = pcim_iomap_table(pdev)[0];
	pwr->irq = pdev->irq;

	mutex_init(&pwr->lock);

	/* Disable interrupts */
	mid_pwr_interrupt_disable(pwr);

	if (info && info->set_initial_state) {
	ret = info->set_initial_state(pwr);
	if (ret)
	dev_warn(dev, "Can't set initial state: %d\n", ret);
	}

	ret = devm_request_irq(dev, pdev->irq, mid_pwr_irq_handler,
	IRQF_NO_SUSPEND, pci_name(pdev), pwr);
	if (ret)
	return ret;

	pwr->available = true;
	midpwr = pwr;

	pci_set_drvdata(pdev, pwr);
	return 0;
	}

	static int mid_set_initial_state(struct mid_pwr pwr, const u32 states)
	{
	unsigned int i, j;
	int ret;

	/*
	* Enable wake events.
	*
	* PWRMU supports up to 32 sources for wake up the system. Ungate them
	* all here.
	*/
	mid_pwr_set_wake(pwr, 0, 0xffffffff);
	mid_pwr_set_wake(pwr, 1, 0xffffffff);

	/*
	* Power off South Complex devices.
	*
	* There is a map (see a note below) of 64 devices with 2 bits per each
	* on 32-bit HW registers. The following calls set all devices to one
	* known initial state, i.e. PCI_D3hot. This is done in conjunction
	* with PMCSR setting in arch/x86/pci/intel_mid_pci.c.
	*
	* NOTE: The actual device mapping is provided by a platform at run
	* time using vendor capability of PCI configuration space.
	*/
	mid_pwr_set_state(pwr, 0, states[0]);
	mid_pwr_set_state(pwr, 1, states[1]);
	mid_pwr_set_state(pwr, 2, states[2]);
	mid_pwr_set_state(pwr, 3, states[3]);

	/* Send command to SCU */
	ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG);
	if (ret)
	return ret;

	for (i = 0; i < LSS_MAX_DEVS; i++) {
	for (j = 0; j < LSS_MAX_SHARED_DEVS; j++)
	pwr->lss[i][j].state = PCI_D3hot;
	}

	return 0;
	}

	static int pnw_set_initial_state(struct mid_pwr *pwr)
	{
	/* On Penwell SRAM must stay powered on */
	const u32 states[] = {
	0xf00fffff, /* PM_SSC(0) */
	0xffffffff, /* PM_SSC(1) */
	0xffffffff, /* PM_SSC(2) */
	0xffffffff, /* PM_SSC(3) */
	};
	return mid_set_initial_state(pwr, states);
	}

	static int tng_set_initial_state(struct mid_pwr *pwr)
	{
	const u32 states[] = {
	0xffffffff, /* PM_SSC(0) */
	0xffffffff, /* PM_SSC(1) */
	0xffffffff, /* PM_SSC(2) */
	0xffffffff, /* PM_SSC(3) */
	};
	return mid_set_initial_state(pwr, states);
	}

	static const struct mid_pwr_device_info pnw_info = {
	.set_initial_state = pnw_set_initial_state,
	};

	static const struct mid_pwr_device_info tng_info = {
	.set_initial_state = tng_set_initial_state,
	};

	/* This table should be in sync with the one in drivers/pci/pci-mid.c */
	static const struct pci_device_id mid_pwr_pci_ids[] = {
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&pnw_info },
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&tng_info },
	{}
	};

	static struct pci_driver mid_pwr_pci_driver = {
	.name = "intel_mid_pwr",
	.probe = mid_pwr_probe,
	.id_table = mid_pwr_pci_ids,
	};

	builtin_pci_driver(mid_pwr_pci_driver);