isci: Added support for C0 to SCU Driver
C0 silicon updates the pci revision id and requires new AFE parameters
for phy signal integrity. Support for previous silicon revisions is
deprecated (it's also broken for the theoretical case of multiple
controllers at different silicon revisions, all the more reason to get
it removed as soon as possible)
Signed-off-by: Adam Gruchala <adam.gruchala@intel.com>
[fixed up deprecated silicon support]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h
index 9f9afbd..5f29882 100644
--- a/drivers/scsi/isci/firmware/create_fw.h
+++ b/drivers/scsi/isci/firmware/create_fw.h
@@ -65,10 +65,10 @@
static const int enable_ssc;
/* AFE_TX_AMP_CONTROL */
-static const unsigned int afe_tx_amp_control0 = 0x000e7c03;
-static const unsigned int afe_tx_amp_control1 = 0x000e7c03;
-static const unsigned int afe_tx_amp_control2 = 0x000e7c03;
-static const unsigned int afe_tx_amp_control3 = 0x000e7c03;
+static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
+static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
+static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
+static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
static const char blob_name[] = "isci_firmware.bin";
static const char sig[] = "ISCUOEMB";
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index f502882..009c0ee 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -2070,13 +2070,13 @@
writel(0x00005500, &scic->scu_registers->afe.afe_bias_control);
else if (is_a2())
writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control);
- else if (is_b0())
+ else if (is_b0() || is_c0())
writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control);
udelay(AFE_REGISTER_WRITE_DELAY);
/* Enable PLL */
- if (is_b0())
+ if (is_b0() || is_c0())
writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0);
else
writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0);
@@ -2102,6 +2102,16 @@
/* Configure transmitter SSC parameters */
writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
udelay(AFE_REGISTER_WRITE_DELAY);
+ } else if (is_c0()) {
+ /* Configure transmitter SSC parameters */
+ writel(0x0003000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /*
+ * All defaults, except the Receive Word Alignament/Comma Detect
+ * Enable....(0xe800) */
+ writel(0x00004500, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
} else {
/*
* All defaults, except the Receive Word Alignament/Comma Detect
@@ -2120,15 +2130,23 @@
writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
else if (is_a2())
writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
- else {
+ else if (is_b0()) {
/* Power down TX and RX (PWRDNTX and PWRDNRX) */
- writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ writel(0x000003D7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
udelay(AFE_REGISTER_WRITE_DELAY);
/*
* Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
* & increase TX int & ext bias 20%....(0xe85c) */
- writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ } else {
+ writel(0x000001E7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /*
+ * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
+ * & increase TX int & ext bias 20%....(0xe85c) */
+ writel(0x000001E4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
}
udelay(AFE_REGISTER_WRITE_DELAY);
@@ -2149,12 +2167,22 @@
writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
else if (is_a2())
writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
- else {
+ else if (is_b0()) {
writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
/* Enable TX equalization (0xe824) */
writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+ } else {
+ writel(0x0140DF0F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x3F6F103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
}
+
udelay(AFE_REGISTER_WRITE_DELAY);
writel(oem_phy->afe_tx_amp_control0,
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 4020cf7..04698dd 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -675,6 +675,7 @@
ISCI_SI_REVA0,
ISCI_SI_REVA2,
ISCI_SI_REVB0,
+ ISCI_SI_REVC0
};
extern int isci_si_rev;
@@ -691,7 +692,12 @@
static inline bool is_b0(void)
{
- return isci_si_rev > ISCI_SI_REVA2;
+ return isci_si_rev == ISCI_SI_REVB0;
+}
+
+static inline bool is_c0(void)
+{
+ return isci_si_rev > ISCI_SI_REVB0;
}
void scic_sds_controller_post_request(struct scic_sds_controller *scic,
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index bda7016..bbfb6e5 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -437,27 +437,27 @@
static void check_si_rev(struct pci_dev *pdev)
{
- if (num_controllers(pdev) > 1)
+ switch (pdev->revision) {
+ case 0:
+ case 1:
+ /* if the id is ambiguous don't update isci_si_rev */
+ break;
+ case 3:
+ isci_si_rev = ISCI_SI_REVA2;
+ break;
+ case 4:
isci_si_rev = ISCI_SI_REVB0;
- else {
- switch (pdev->revision) {
- case 0:
- case 1:
- /* if the id is ambiguous don't update isci_si_rev */
- break;
- case 3:
- isci_si_rev = ISCI_SI_REVA2;
- break;
- default:
- case 4:
- isci_si_rev = ISCI_SI_REVB0;
- break;
- }
+ break;
+ default:
+ case 5:
+ isci_si_rev = ISCI_SI_REVC0;
+ break;
}
dev_info(&pdev->dev, "driver configured for %s silicon (rev: %d)\n",
isci_si_rev == ISCI_SI_REVA0 ? "A0" :
- isci_si_rev == ISCI_SI_REVA2 ? "A2" : "B0", pdev->revision);
+ isci_si_rev == ISCI_SI_REVA2 ? "A2" :
+ isci_si_rev == ISCI_SI_REVB0 ? "B0" : "C0", pdev->revision);
}
diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c
index 084fdc6..bc52a61 100644
--- a/drivers/scsi/isci/probe_roms.c
+++ b/drivers/scsi/isci/probe_roms.c
@@ -136,6 +136,7 @@
struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw)
{
struct isci_orom *orom = NULL, *data;
+ int i, j;
if (request_firmware(&fw, ISCI_FW_NAME, &pdev->dev) != 0)
return NULL;
@@ -155,6 +156,20 @@
memcpy(orom, fw->data, fw->size);
+ /*
+ * deprecated: override default amp_control for pre-preproduction
+ * silicon revisions
+ */
+ if (isci_si_rev <= ISCI_SI_REVB0)
+ goto out;
+
+ for (i = 0; i < ARRAY_SIZE(orom->ctrl); i++)
+ for (j = 0; j < ARRAY_SIZE(orom->ctrl[i].phys); j++) {
+ orom->ctrl[i].phys[j].afe_tx_amp_control0 = 0xe7c03;
+ orom->ctrl[i].phys[j].afe_tx_amp_control1 = 0xe7c03;
+ orom->ctrl[i].phys[j].afe_tx_amp_control2 = 0xe7c03;
+ orom->ctrl[i].phys[j].afe_tx_amp_control3 = 0xe7c03;
+ }
out:
release_firmware(fw);