Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM
ACPI: create "processor.bm_check_disable" boot param
ACPI: skip checking BM_STS if the BIOS doesn't ask for it
ACPI: fix unused function warning
ACPI: processor: fix processor_physically_present on UP
ACPI video: fix string mismatch for Sony SR290 laptop
ACPI battery: don't invoke power_supply_changed twice when battery is hot-added
ACPI: handle systems which asynchoronously enable ACPI mode
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index c268783..1571c0c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -647,3 +647,10 @@
----------------------------
+What: The acpi_sleep=s4_nonvs command line option
+When: 2.6.37
+Files: arch/x86/kernel/acpi/sleep.c
+Why: superseded by acpi_sleep=nonvs
+Who: Rafael J. Wysocki <rjw@sisk.pl>
+
+----------------------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4ddb58d..2b2407d 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -254,8 +254,8 @@
control method, with respect to putting devices into
low power states, to be enforced (the ACPI 2.0 ordering
of _PTS is used by default).
- s4_nonvs prevents the kernel from saving/restoring the
- ACPI NVS memory during hibernation.
+ nonvs prevents the kernel from saving/restoring the
+ ACPI NVS memory during suspend/hibernation and resume.
sci_force_enable causes the kernel to set SCI_EN directly
on resume from S1/S3 (which is against the ACPI spec,
but some broken systems don't work without it).
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 2e837f5..fb7a5f0 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -145,6 +145,15 @@
percpu_entry->states[cx->index].eax = cx->address;
percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
}
+
+ /*
+ * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
+ * then we should skip checking BM_STS for this C-state.
+ * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
+ */
+ if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
+ cx->bm_sts_skip = 1;
+
return retval;
}
EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 82e5086..fcc3c61f 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -157,9 +157,14 @@
#ifdef CONFIG_HIBERNATION
if (strncmp(str, "s4_nohwsig", 10) == 0)
acpi_no_s4_hw_signature();
- if (strncmp(str, "s4_nonvs", 8) == 0)
- acpi_s4_no_nvs();
+ if (strncmp(str, "s4_nonvs", 8) == 0) {
+ pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, "
+ "please use acpi_sleep=nonvs instead");
+ acpi_nvs_nosave();
+ }
#endif
+ if (strncmp(str, "nonvs", 5) == 0)
+ acpi_nvs_nosave();
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
str = strchr(str, ',');
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index d97b8dc..18b3f14 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -70,6 +70,7 @@
acpi_status acpi_enable(void)
{
acpi_status status;
+ int retry;
ACPI_FUNCTION_TRACE(acpi_enable);
@@ -98,16 +99,18 @@
/* Sanity check that transition succeeded */
- if (acpi_hw_get_mode() != ACPI_SYS_MODE_ACPI) {
- ACPI_ERROR((AE_INFO,
- "Hardware did not enter ACPI mode"));
- return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
+ for (retry = 0; retry < 30000; ++retry) {
+ if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
+ if (retry != 0)
+ ACPI_WARNING((AE_INFO,
+ "Platform took > %d00 usec to enter ACPI mode", retry));
+ return_ACPI_STATUS(AE_OK);
+ }
+ acpi_os_stall(100); /* 100 usec */
}
- ACPI_DEBUG_PRINT((ACPI_DB_INIT,
- "Transition to ACPI mode successful\n"));
-
- return_ACPI_STATUS(AE_OK);
+ ACPI_ERROR((AE_INFO, "Hardware did not enter ACPI mode"));
+ return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
}
ACPI_EXPORT_SYMBOL(acpi_enable)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 3026e3f..dc58402 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -868,9 +868,15 @@
static void acpi_battery_notify(struct acpi_device *device, u32 event)
{
struct acpi_battery *battery = acpi_driver_data(device);
+#ifdef CONFIG_ACPI_SYSFS_POWER
+ struct device *old;
+#endif
if (!battery)
return;
+#ifdef CONFIG_ACPI_SYSFS_POWER
+ old = battery->bat.dev;
+#endif
acpi_battery_update(battery);
acpi_bus_generate_proc_event(device, event,
acpi_battery_present(battery));
@@ -879,7 +885,7 @@
acpi_battery_present(battery));
#ifdef CONFIG_ACPI_SYSFS_POWER
/* acpi_battery_update could remove power_supply object */
- if (battery->bat.dev)
+ if (old && battery->bat.dev)
power_supply_changed(&battery->bat);
#endif
}
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 01381be..2bb28b9 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -214,7 +214,7 @@
.ident = "Sony VGN-SR290J",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"),
},
},
{
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 5128435..e9699aae 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -223,7 +223,7 @@
type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0;
cpuid = acpi_get_cpuid(handle, type, acpi_id);
- if (cpuid == -1)
+ if ((cpuid == -1) && (num_possible_cpus() > 1))
return false;
return true;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index b1b3856..e9a8026 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -76,14 +76,19 @@
module_param(max_cstate, uint, 0000);
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);
+static int bm_check_disable __read_mostly;
+module_param(bm_check_disable, uint, 0000);
static unsigned int latency_factor __read_mostly = 2;
module_param(latency_factor, uint, 0644);
+#ifdef CONFIG_ACPI_PROCFS
static u64 us_to_pm_timer_ticks(s64 t)
{
return div64_u64(t * PM_TIMER_FREQUENCY, 1000000);
}
+#endif
+
/*
* IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
* For now disable this. Probably a bug somewhere else.
@@ -763,6 +768,9 @@
{
u32 bm_status = 0;
+ if (bm_check_disable)
+ return 0;
+
acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
if (bm_status)
acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
@@ -947,7 +955,7 @@
if (acpi_idle_suspend)
return(acpi_idle_enter_c1(dev, state));
- if (acpi_idle_bm_check()) {
+ if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
if (dev->safe_state) {
dev->last_state = dev->safe_state;
return dev->safe_state->enter(dev, dev->safe_state);
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 5b7c52e..2862c78 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -82,6 +82,20 @@
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
/*
+ * The ACPI specification wants us to save NVS memory regions during hibernation
+ * and to restore them during the subsequent resume. Windows does that also for
+ * suspend to RAM. However, it is known that this mechanism does not work on
+ * all machines, so we allow the user to disable it with the help of the
+ * 'acpi_sleep=nonvs' kernel command line option.
+ */
+static bool nvs_nosave;
+
+void __init acpi_nvs_nosave(void)
+{
+ nvs_nosave = true;
+}
+
+/*
* ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
* user to request that behavior by using the 'acpi_old_suspend_ordering'
* kernel command line option that causes the following variable to be set.
@@ -197,8 +211,7 @@
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
- error = suspend_nvs_alloc();
-
+ error = nvs_nosave ? 0 : suspend_nvs_alloc();
if (error)
return error;
@@ -388,20 +401,6 @@
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATION
-/*
- * The ACPI specification wants us to save NVS memory regions during hibernation
- * and to restore them during the subsequent resume. However, it is not certain
- * if this mechanism is going to work on all machines, so we allow the user to
- * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
- * option.
- */
-static bool s4_no_nvs;
-
-void __init acpi_s4_no_nvs(void)
-{
- s4_no_nvs = true;
-}
-
static unsigned long s4_hardware_signature;
static struct acpi_table_facs *facs;
static bool nosigcheck;
@@ -415,7 +414,7 @@
{
int error;
- error = s4_no_nvs ? 0 : suspend_nvs_alloc();
+ error = nvs_nosave ? 0 : suspend_nvs_alloc();
if (!error) {
acpi_target_sleep_state = ACPI_STATE_S4;
acpi_sleep_tts_switch(acpi_target_sleep_state);
@@ -510,7 +509,7 @@
error = acpi_sleep_prepare(ACPI_STATE_S4);
if (!error) {
- if (!s4_no_nvs)
+ if (!nvs_nosave)
error = suspend_nvs_alloc();
if (!error)
acpi_target_sleep_state = ACPI_STATE_S4;
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index da565a4..a68ca8a 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -48,7 +48,7 @@
u8 space_id;
u8 bit_width;
u8 bit_offset;
- u8 reserved;
+ u8 access_size;
u64 address;
} __attribute__ ((packed));
@@ -63,6 +63,7 @@
u32 power;
u32 usage;
u64 time;
+ u8 bm_sts_skip;
char desc[ACPI_CX_DESC_LEN];
};
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 224a38c..ccf94dc 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -253,7 +253,7 @@
#ifdef CONFIG_PM_SLEEP
void __init acpi_no_s4_hw_signature(void);
void __init acpi_old_suspend_ordering(void);
-void __init acpi_s4_no_nvs(void);
+void __init acpi_nvs_nosave(void);
#endif /* CONFIG_PM_SLEEP */
struct acpi_osc_context {