staging:iio: Move DAC drivers out of staging
The IIO DAC drivers are in a reasonably good shape. They all make use of channel
spec and non of them provides non-documented sysfs attributes. Code style should
be OK as well, both checkpatch and coccicheck only report trivial issues.
So lets move the whole folder out of staging.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/iio/dac/max517.c b/drivers/iio/dac/max517.c
new file mode 100644
index 0000000..92c77c8
--- /dev/null
+++ b/drivers/iio/dac/max517.c
@@ -0,0 +1,243 @@
+/*
+ * max517.c - Support for Maxim MAX517, MAX518 and MAX519
+ *
+ * Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/dac/max517.h>
+
+#define MAX517_DRV_NAME "max517"
+
+/* Commands */
+#define COMMAND_CHANNEL0 0x00
+#define COMMAND_CHANNEL1 0x01 /* for MAX518 and MAX519 */
+#define COMMAND_PD 0x08 /* Power Down */
+
+enum max517_device_ids {
+ ID_MAX517,
+ ID_MAX518,
+ ID_MAX519,
+};
+
+struct max517_data {
+ struct iio_dev *indio_dev;
+ struct i2c_client *client;
+ unsigned short vref_mv[2];
+};
+
+/*
+ * channel: bit 0: channel 1
+ * bit 1: channel 2
+ * (this way, it's possible to set both channels at once)
+ */
+static int max517_set_value(struct iio_dev *indio_dev,
+ long val, int channel)
+{
+ struct max517_data *data = iio_priv(indio_dev);
+ struct i2c_client *client = data->client;
+ u8 outbuf[2];
+ int res;
+
+ if (val < 0 || val > 255)
+ return -EINVAL;
+
+ outbuf[0] = channel;
+ outbuf[1] = val;
+
+ res = i2c_master_send(client, outbuf, 2);
+ if (res < 0)
+ return res;
+ else if (res != 2)
+ return -EIO;
+ else
+ return 0;
+}
+
+static int max517_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ struct max517_data *data = iio_priv(indio_dev);
+ unsigned int scale_uv;
+
+ switch (m) {
+ case IIO_CHAN_INFO_SCALE:
+ /* Corresponds to Vref / 2^(bits) */
+ scale_uv = (data->vref_mv[chan->channel] * 1000) >> 8;
+ *val = scale_uv / 1000000;
+ *val2 = scale_uv % 1000000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ break;
+ }
+ return -EINVAL;
+}
+
+static int max517_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = max517_set_value(indio_dev, val, chan->channel);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max517_suspend(struct device *dev)
+{
+ u8 outbuf = COMMAND_PD;
+
+ return i2c_master_send(to_i2c_client(dev), &outbuf, 1);
+}
+
+static int max517_resume(struct device *dev)
+{
+ u8 outbuf = 0;
+
+ return i2c_master_send(to_i2c_client(dev), &outbuf, 1);
+}
+
+static SIMPLE_DEV_PM_OPS(max517_pm_ops, max517_suspend, max517_resume);
+#define MAX517_PM_OPS (&max517_pm_ops)
+#else
+#define MAX517_PM_OPS NULL
+#endif
+
+static const struct iio_info max517_info = {
+ .read_raw = max517_read_raw,
+ .write_raw = max517_write_raw,
+ .driver_module = THIS_MODULE,
+};
+
+#define MAX517_CHANNEL(chan) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .output = 1, \
+ .channel = (chan), \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
+ .scan_type = IIO_ST('u', 8, 8, 0), \
+}
+
+static const struct iio_chan_spec max517_channels[] = {
+ MAX517_CHANNEL(0),
+ MAX517_CHANNEL(1)
+};
+
+static int max517_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct max517_data *data;
+ struct iio_dev *indio_dev;
+ struct max517_platform_data *platform_data = client->dev.platform_data;
+ int err;
+
+ indio_dev = iio_device_alloc(sizeof(*data));
+ if (indio_dev == NULL) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+
+ /* establish that the iio_dev is a child of the i2c device */
+ indio_dev->dev.parent = &client->dev;
+
+ /* reduced channel set for MAX517 */
+ if (id->driver_data == ID_MAX517)
+ indio_dev->num_channels = 1;
+ else
+ indio_dev->num_channels = 2;
+ indio_dev->channels = max517_channels;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &max517_info;
+
+ /*
+ * Reference voltage on MAX518 and default is 5V, else take vref_mv
+ * from platform_data
+ */
+ if (id->driver_data == ID_MAX518 || !platform_data) {
+ data->vref_mv[0] = data->vref_mv[1] = 5000; /* mV */
+ } else {
+ data->vref_mv[0] = platform_data->vref_mv[0];
+ data->vref_mv[1] = platform_data->vref_mv[1];
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto exit_free_device;
+
+ dev_info(&client->dev, "DAC registered\n");
+
+ return 0;
+
+exit_free_device:
+ iio_device_free(indio_dev);
+exit:
+ return err;
+}
+
+static int max517_remove(struct i2c_client *client)
+{
+ iio_device_unregister(i2c_get_clientdata(client));
+ iio_device_free(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id max517_id[] = {
+ { "max517", ID_MAX517 },
+ { "max518", ID_MAX518 },
+ { "max519", ID_MAX519 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max517_id);
+
+static struct i2c_driver max517_driver = {
+ .driver = {
+ .name = MAX517_DRV_NAME,
+ .pm = MAX517_PM_OPS,
+ },
+ .probe = max517_probe,
+ .remove = max517_remove,
+ .id_table = max517_id,
+};
+module_i2c_driver(max517_driver);
+
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("MAX517/MAX518/MAX519 8-bit DAC");
+MODULE_LICENSE("GPL");