| /* |
| * Copyright 2016 Linaro Ltd. |
| * Copyright 2016 ZTE Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/component.h> |
| #include <linux/of_address.h> |
| #include <video/videomode.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_of.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drmP.h> |
| |
| #include "zx_common_regs.h" |
| #include "zx_drm_drv.h" |
| #include "zx_plane.h" |
| #include "zx_vou.h" |
| #include "zx_vou_regs.h" |
| |
| #define GL_NUM 2 |
| #define VL_NUM 3 |
| |
| enum vou_chn_type { |
| VOU_CHN_MAIN, |
| VOU_CHN_AUX, |
| }; |
| |
| struct zx_crtc_regs { |
| u32 fir_active; |
| u32 fir_htiming; |
| u32 fir_vtiming; |
| u32 sec_vtiming; |
| u32 timing_shift; |
| u32 timing_pi_shift; |
| }; |
| |
| static const struct zx_crtc_regs main_crtc_regs = { |
| .fir_active = FIR_MAIN_ACTIVE, |
| .fir_htiming = FIR_MAIN_H_TIMING, |
| .fir_vtiming = FIR_MAIN_V_TIMING, |
| .sec_vtiming = SEC_MAIN_V_TIMING, |
| .timing_shift = TIMING_MAIN_SHIFT, |
| .timing_pi_shift = TIMING_MAIN_PI_SHIFT, |
| }; |
| |
| static const struct zx_crtc_regs aux_crtc_regs = { |
| .fir_active = FIR_AUX_ACTIVE, |
| .fir_htiming = FIR_AUX_H_TIMING, |
| .fir_vtiming = FIR_AUX_V_TIMING, |
| .sec_vtiming = SEC_AUX_V_TIMING, |
| .timing_shift = TIMING_AUX_SHIFT, |
| .timing_pi_shift = TIMING_AUX_PI_SHIFT, |
| }; |
| |
| struct zx_crtc_bits { |
| u32 polarity_mask; |
| u32 polarity_shift; |
| u32 int_frame_mask; |
| u32 tc_enable; |
| u32 sec_vactive_shift; |
| u32 sec_vactive_mask; |
| u32 interlace_select; |
| u32 pi_enable; |
| u32 div_vga_shift; |
| u32 div_pic_shift; |
| u32 div_tvenc_shift; |
| u32 div_hdmi_pnx_shift; |
| u32 div_hdmi_shift; |
| u32 div_inf_shift; |
| u32 div_layer_shift; |
| }; |
| |
| static const struct zx_crtc_bits main_crtc_bits = { |
| .polarity_mask = MAIN_POL_MASK, |
| .polarity_shift = MAIN_POL_SHIFT, |
| .int_frame_mask = TIMING_INT_MAIN_FRAME, |
| .tc_enable = MAIN_TC_EN, |
| .sec_vactive_shift = SEC_VACT_MAIN_SHIFT, |
| .sec_vactive_mask = SEC_VACT_MAIN_MASK, |
| .interlace_select = MAIN_INTERLACE_SEL, |
| .pi_enable = MAIN_PI_EN, |
| .div_vga_shift = VGA_MAIN_DIV_SHIFT, |
| .div_pic_shift = PIC_MAIN_DIV_SHIFT, |
| .div_tvenc_shift = TVENC_MAIN_DIV_SHIFT, |
| .div_hdmi_pnx_shift = HDMI_MAIN_PNX_DIV_SHIFT, |
| .div_hdmi_shift = HDMI_MAIN_DIV_SHIFT, |
| .div_inf_shift = INF_MAIN_DIV_SHIFT, |
| .div_layer_shift = LAYER_MAIN_DIV_SHIFT, |
| }; |
| |
| static const struct zx_crtc_bits aux_crtc_bits = { |
| .polarity_mask = AUX_POL_MASK, |
| .polarity_shift = AUX_POL_SHIFT, |
| .int_frame_mask = TIMING_INT_AUX_FRAME, |
| .tc_enable = AUX_TC_EN, |
| .sec_vactive_shift = SEC_VACT_AUX_SHIFT, |
| .sec_vactive_mask = SEC_VACT_AUX_MASK, |
| .interlace_select = AUX_INTERLACE_SEL, |
| .pi_enable = AUX_PI_EN, |
| .div_vga_shift = VGA_AUX_DIV_SHIFT, |
| .div_pic_shift = PIC_AUX_DIV_SHIFT, |
| .div_tvenc_shift = TVENC_AUX_DIV_SHIFT, |
| .div_hdmi_pnx_shift = HDMI_AUX_PNX_DIV_SHIFT, |
| .div_hdmi_shift = HDMI_AUX_DIV_SHIFT, |
| .div_inf_shift = INF_AUX_DIV_SHIFT, |
| .div_layer_shift = LAYER_AUX_DIV_SHIFT, |
| }; |
| |
| struct zx_crtc { |
| struct drm_crtc crtc; |
| struct drm_plane *primary; |
| struct zx_vou_hw *vou; |
| void __iomem *chnreg; |
| void __iomem *chncsc; |
| void __iomem *dither; |
| const struct zx_crtc_regs *regs; |
| const struct zx_crtc_bits *bits; |
| enum vou_chn_type chn_type; |
| struct clk *pixclk; |
| }; |
| |
| #define to_zx_crtc(x) container_of(x, struct zx_crtc, crtc) |
| |
| struct vou_layer_bits { |
| u32 enable; |
| u32 chnsel; |
| u32 clksel; |
| }; |
| |
| static const struct vou_layer_bits zx_gl_bits[GL_NUM] = { |
| { |
| .enable = OSD_CTRL0_GL0_EN, |
| .chnsel = OSD_CTRL0_GL0_SEL, |
| .clksel = VOU_CLK_GL0_SEL, |
| }, { |
| .enable = OSD_CTRL0_GL1_EN, |
| .chnsel = OSD_CTRL0_GL1_SEL, |
| .clksel = VOU_CLK_GL1_SEL, |
| }, |
| }; |
| |
| static const struct vou_layer_bits zx_vl_bits[VL_NUM] = { |
| { |
| .enable = OSD_CTRL0_VL0_EN, |
| .chnsel = OSD_CTRL0_VL0_SEL, |
| .clksel = VOU_CLK_VL0_SEL, |
| }, { |
| .enable = OSD_CTRL0_VL1_EN, |
| .chnsel = OSD_CTRL0_VL1_SEL, |
| .clksel = VOU_CLK_VL1_SEL, |
| }, { |
| .enable = OSD_CTRL0_VL2_EN, |
| .chnsel = OSD_CTRL0_VL2_SEL, |
| .clksel = VOU_CLK_VL2_SEL, |
| }, |
| }; |
| |
| struct zx_vou_hw { |
| struct device *dev; |
| void __iomem *osd; |
| void __iomem *timing; |
| void __iomem *vouctl; |
| void __iomem *otfppu; |
| void __iomem *dtrc; |
| struct clk *axi_clk; |
| struct clk *ppu_clk; |
| struct clk *main_clk; |
| struct clk *aux_clk; |
| struct zx_crtc *main_crtc; |
| struct zx_crtc *aux_crtc; |
| }; |
| |
| enum vou_inf_data_sel { |
| VOU_YUV444 = 0, |
| VOU_RGB_101010 = 1, |
| VOU_RGB_888 = 2, |
| VOU_RGB_666 = 3, |
| }; |
| |
| struct vou_inf { |
| enum vou_inf_id id; |
| enum vou_inf_data_sel data_sel; |
| u32 clocks_en_bits; |
| u32 clocks_sel_bits; |
| }; |
| |
| static struct vou_inf vou_infs[] = { |
| [VOU_HDMI] = { |
| .data_sel = VOU_YUV444, |
| .clocks_en_bits = BIT(24) | BIT(18) | BIT(6), |
| .clocks_sel_bits = BIT(13) | BIT(2), |
| }, |
| [VOU_TV_ENC] = { |
| .data_sel = VOU_YUV444, |
| .clocks_en_bits = BIT(15), |
| .clocks_sel_bits = BIT(11) | BIT(0), |
| }, |
| [VOU_VGA] = { |
| .data_sel = VOU_RGB_888, |
| .clocks_en_bits = BIT(1), |
| .clocks_sel_bits = BIT(10), |
| }, |
| }; |
| |
| static inline struct zx_vou_hw *crtc_to_vou(struct drm_crtc *crtc) |
| { |
| struct zx_crtc *zcrtc = to_zx_crtc(crtc); |
| |
| return zcrtc->vou; |
| } |
| |
| void vou_inf_hdmi_audio_sel(struct drm_crtc *crtc, |
| enum vou_inf_hdmi_audio aud) |
| { |
| struct zx_crtc *zcrtc = to_zx_crtc(crtc); |
| struct zx_vou_hw *vou = zcrtc->vou; |
| |
| zx_writel_mask(vou->vouctl + VOU_INF_HDMI_CTRL, VOU_HDMI_AUD_MASK, aud); |
| } |
| |
| void vou_inf_enable(enum vou_inf_id id, struct drm_crtc *crtc) |
| { |
| struct zx_crtc *zcrtc = to_zx_crtc(crtc); |
| struct zx_vou_hw *vou = zcrtc->vou; |
| struct vou_inf *inf = &vou_infs[id]; |
| void __iomem *dither = zcrtc->dither; |
| void __iomem *csc = zcrtc->chncsc; |
| bool is_main = zcrtc->chn_type == VOU_CHN_MAIN; |
| u32 data_sel_shift = id << 1; |
| |
| if (inf->data_sel != VOU_YUV444) { |
| /* Enable channel CSC for RGB output */ |
| zx_writel_mask(csc + CSC_CTRL0, CSC_COV_MODE_MASK, |
| CSC_BT709_IMAGE_YCBCR2RGB << CSC_COV_MODE_SHIFT); |
| zx_writel_mask(csc + CSC_CTRL0, CSC_WORK_ENABLE, |
| CSC_WORK_ENABLE); |
| |
| /* Bypass Dither block for RGB output */ |
| zx_writel_mask(dither + OSD_DITHER_CTRL0, DITHER_BYSPASS, |
| DITHER_BYSPASS); |
| } else { |
| zx_writel_mask(csc + CSC_CTRL0, CSC_WORK_ENABLE, 0); |
| zx_writel_mask(dither + OSD_DITHER_CTRL0, DITHER_BYSPASS, 0); |
| } |
| |
| /* Select data format */ |
| zx_writel_mask(vou->vouctl + VOU_INF_DATA_SEL, 0x3 << data_sel_shift, |
| inf->data_sel << data_sel_shift); |
| |
| /* Select channel */ |
| zx_writel_mask(vou->vouctl + VOU_INF_CH_SEL, 0x1 << id, |
| zcrtc->chn_type << id); |
| |
| /* Select interface clocks */ |
| zx_writel_mask(vou->vouctl + VOU_CLK_SEL, inf->clocks_sel_bits, |
| is_main ? 0 : inf->clocks_sel_bits); |
| |
| /* Enable interface clocks */ |
| zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits, |
| inf->clocks_en_bits); |
| |
| /* Enable the device */ |
| zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << id, 1 << id); |
| } |
| |
| void vou_inf_disable(enum vou_inf_id id, struct drm_crtc *crtc) |
| { |
| struct zx_vou_hw *vou = crtc_to_vou(crtc); |
| struct vou_inf *inf = &vou_infs[id]; |
| |
| /* Disable the device */ |
| zx_writel_mask(vou->vouctl + VOU_INF_EN, 1 << id, 0); |
| |
| /* Disable interface clocks */ |
| zx_writel_mask(vou->vouctl + VOU_CLK_EN, inf->clocks_en_bits, 0); |
| } |
| |
| void zx_vou_config_dividers(struct drm_crtc *crtc, |
| struct vou_div_config *configs, int num) |
| { |
| struct zx_crtc *zcrtc = to_zx_crtc(crtc); |
| struct zx_vou_hw *vou = zcrtc->vou; |
| const struct zx_crtc_bits *bits = zcrtc->bits; |
| int i; |
| |
| /* Clear update flag bit */ |
| zx_writel_mask(vou->vouctl + VOU_DIV_PARA, DIV_PARA_UPDATE, 0); |
| |
| for (i = 0; i < num; i++) { |
| struct vou_div_config *cfg = configs + i; |
| u32 reg, shift; |
| |
| switch (cfg->id) { |
| case VOU_DIV_VGA: |
| reg = VOU_CLK_SEL; |
| shift = bits->div_vga_shift; |
| break; |
| case VOU_DIV_PIC: |
| reg = VOU_CLK_SEL; |
| shift = bits->div_pic_shift; |
| break; |
| case VOU_DIV_TVENC: |
| reg = VOU_DIV_PARA; |
| shift = bits->div_tvenc_shift; |
| break; |
| case VOU_DIV_HDMI_PNX: |
| reg = VOU_DIV_PARA; |
| shift = bits->div_hdmi_pnx_shift; |
| break; |
| case VOU_DIV_HDMI: |
| reg = VOU_DIV_PARA; |
| shift = bits->div_hdmi_shift; |
| break; |
| case VOU_DIV_INF: |
| reg = VOU_DIV_PARA; |
| shift = bits->div_inf_shift; |
| break; |
| case VOU_DIV_LAYER: |
| reg = VOU_DIV_PARA; |
| shift = bits->div_layer_shift; |
| break; |
| default: |
| continue; |
| } |
| |
| /* Each divider occupies 3 bits */ |
| zx_writel_mask(vou->vouctl + reg, 0x7 << shift, |
| cfg->val << shift); |
| } |
| |
| /* Set update flag bit to get dividers effected */ |
| zx_writel_mask(vou->vouctl + VOU_DIV_PARA, DIV_PARA_UPDATE, |
| DIV_PARA_UPDATE); |
| } |
| |
| static inline void vou_chn_set_update(struct zx_crtc *zcrtc) |
| { |
| zx_writel(zcrtc->chnreg + CHN_UPDATE, 1); |
| } |
| |
| static void zx_crtc_enable(struct drm_crtc *crtc) |
| { |
| struct drm_display_mode *mode = &crtc->state->adjusted_mode; |
| bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE; |
| struct zx_crtc *zcrtc = to_zx_crtc(crtc); |
| struct zx_vou_hw *vou = zcrtc->vou; |
| const struct zx_crtc_regs *regs = zcrtc->regs; |
| const struct zx_crtc_bits *bits = zcrtc->bits; |
| struct videomode vm; |
| u32 scan_mask; |
| u32 pol = 0; |
| u32 val; |
| int ret; |
| |
| drm_display_mode_to_videomode(mode, &vm); |
| |
| /* Set up timing parameters */ |
| val = V_ACTIVE((interlaced ? vm.vactive / 2 : vm.vactive) - 1); |
| val |= H_ACTIVE(vm.hactive - 1); |
| zx_writel(vou->timing + regs->fir_active, val); |
| |
| val = SYNC_WIDE(vm.hsync_len - 1); |
| val |= BACK_PORCH(vm.hback_porch - 1); |
| val |= FRONT_PORCH(vm.hfront_porch - 1); |
| zx_writel(vou->timing + regs->fir_htiming, val); |
| |
| val = SYNC_WIDE(vm.vsync_len - 1); |
| val |= BACK_PORCH(vm.vback_porch - 1); |
| val |= FRONT_PORCH(vm.vfront_porch - 1); |
| zx_writel(vou->timing + regs->fir_vtiming, val); |
| |
| if (interlaced) { |
| u32 shift = bits->sec_vactive_shift; |
| u32 mask = bits->sec_vactive_mask; |
| |
| val = zx_readl(vou->timing + SEC_V_ACTIVE); |
| val &= ~mask; |
| val |= ((vm.vactive / 2 - 1) << shift) & mask; |
| zx_writel(vou->timing + SEC_V_ACTIVE, val); |
| |
| val = SYNC_WIDE(vm.vsync_len - 1); |
| /* |
| * The vback_porch for the second field needs to shift one on |
| * the value for the first field. |
| */ |
| val |= BACK_PORCH(vm.vback_porch); |
| val |= FRONT_PORCH(vm.vfront_porch - 1); |
| zx_writel(vou->timing + regs->sec_vtiming, val); |
| } |
| |
| /* Set up polarities */ |
| if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW) |
| pol |= 1 << POL_VSYNC_SHIFT; |
| if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW) |
| pol |= 1 << POL_HSYNC_SHIFT; |
| |
| zx_writel_mask(vou->timing + TIMING_CTRL, bits->polarity_mask, |
| pol << bits->polarity_shift); |
| |
| /* Setup SHIFT register by following what ZTE BSP does */ |
| val = H_SHIFT_VAL; |
| if (interlaced) |
| val |= V_SHIFT_VAL << 16; |
| zx_writel(vou->timing + regs->timing_shift, val); |
| zx_writel(vou->timing + regs->timing_pi_shift, H_PI_SHIFT_VAL); |
| |
| /* Progressive or interlace scan select */ |
| scan_mask = bits->interlace_select | bits->pi_enable; |
| zx_writel_mask(vou->timing + SCAN_CTRL, scan_mask, |
| interlaced ? scan_mask : 0); |
| |
| /* Enable TIMING_CTRL */ |
| zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable, |
| bits->tc_enable); |
| |
| /* Configure channel screen size */ |
| zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_W_MASK, |
| vm.hactive << CHN_SCREEN_W_SHIFT); |
| zx_writel_mask(zcrtc->chnreg + CHN_CTRL1, CHN_SCREEN_H_MASK, |
| vm.vactive << CHN_SCREEN_H_SHIFT); |
| |
| /* Configure channel interlace buffer control */ |
| zx_writel_mask(zcrtc->chnreg + CHN_INTERLACE_BUF_CTRL, CHN_INTERLACE_EN, |
| interlaced ? CHN_INTERLACE_EN : 0); |
| |
| /* Update channel */ |
| vou_chn_set_update(zcrtc); |
| |
| /* Enable channel */ |
| zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, CHN_ENABLE); |
| |
| drm_crtc_vblank_on(crtc); |
| |
| ret = clk_set_rate(zcrtc->pixclk, mode->clock * 1000); |
| if (ret) { |
| DRM_DEV_ERROR(vou->dev, "failed to set pixclk rate: %d\n", ret); |
| return; |
| } |
| |
| ret = clk_prepare_enable(zcrtc->pixclk); |
| if (ret) |
| DRM_DEV_ERROR(vou->dev, "failed to enable pixclk: %d\n", ret); |
| } |
| |
| static void zx_crtc_disable(struct drm_crtc *crtc) |
| { |
| struct zx_crtc *zcrtc = to_zx_crtc(crtc); |
| const struct zx_crtc_bits *bits = zcrtc->bits; |
| struct zx_vou_hw *vou = zcrtc->vou; |
| |
| clk_disable_unprepare(zcrtc->pixclk); |
| |
| drm_crtc_vblank_off(crtc); |
| |
| /* Disable channel */ |
| zx_writel_mask(zcrtc->chnreg + CHN_CTRL0, CHN_ENABLE, 0); |
| |
| /* Disable TIMING_CTRL */ |
| zx_writel_mask(vou->timing + TIMING_TC_ENABLE, bits->tc_enable, 0); |
| } |
| |
| static void zx_crtc_atomic_flush(struct drm_crtc *crtc, |
| struct drm_crtc_state *old_state) |
| { |
| struct drm_pending_vblank_event *event = crtc->state->event; |
| |
| if (!event) |
| return; |
| |
| crtc->state->event = NULL; |
| |
| spin_lock_irq(&crtc->dev->event_lock); |
| if (drm_crtc_vblank_get(crtc) == 0) |
| drm_crtc_arm_vblank_event(crtc, event); |
| else |
| drm_crtc_send_vblank_event(crtc, event); |
| spin_unlock_irq(&crtc->dev->event_lock); |
| } |
| |
| static const struct drm_crtc_helper_funcs zx_crtc_helper_funcs = { |
| .enable = zx_crtc_enable, |
| .disable = zx_crtc_disable, |
| .atomic_flush = zx_crtc_atomic_flush, |
| }; |
| |
| static int zx_vou_enable_vblank(struct drm_crtc *crtc) |
| { |
| struct zx_crtc *zcrtc = to_zx_crtc(crtc); |
| struct zx_vou_hw *vou = crtc_to_vou(crtc); |
| u32 int_frame_mask = zcrtc->bits->int_frame_mask; |
| |
| zx_writel_mask(vou->timing + TIMING_INT_CTRL, int_frame_mask, |
| int_frame_mask); |
| |
| return 0; |
| } |
| |
| static void zx_vou_disable_vblank(struct drm_crtc *crtc) |
| { |
| struct zx_crtc *zcrtc = to_zx_crtc(crtc); |
| struct zx_vou_hw *vou = crtc_to_vou(crtc); |
| |
| zx_writel_mask(vou->timing + TIMING_INT_CTRL, |
| zcrtc->bits->int_frame_mask, 0); |
| } |
| |
| static const struct drm_crtc_funcs zx_crtc_funcs = { |
| .destroy = drm_crtc_cleanup, |
| .set_config = drm_atomic_helper_set_config, |
| .page_flip = drm_atomic_helper_page_flip, |
| .reset = drm_atomic_helper_crtc_reset, |
| .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, |
| .enable_vblank = zx_vou_enable_vblank, |
| .disable_vblank = zx_vou_disable_vblank, |
| }; |
| |
| static int zx_crtc_init(struct drm_device *drm, struct zx_vou_hw *vou, |
| enum vou_chn_type chn_type) |
| { |
| struct device *dev = vou->dev; |
| struct zx_plane *zplane; |
| struct zx_crtc *zcrtc; |
| int ret; |
| |
| zcrtc = devm_kzalloc(dev, sizeof(*zcrtc), GFP_KERNEL); |
| if (!zcrtc) |
| return -ENOMEM; |
| |
| zcrtc->vou = vou; |
| zcrtc->chn_type = chn_type; |
| |
| zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL); |
| if (!zplane) |
| return -ENOMEM; |
| |
| zplane->dev = dev; |
| |
| if (chn_type == VOU_CHN_MAIN) { |
| zplane->layer = vou->osd + MAIN_GL_OFFSET; |
| zplane->csc = vou->osd + MAIN_GL_CSC_OFFSET; |
| zplane->hbsc = vou->osd + MAIN_HBSC_OFFSET; |
| zplane->rsz = vou->otfppu + MAIN_RSZ_OFFSET; |
| zplane->bits = &zx_gl_bits[0]; |
| zcrtc->chnreg = vou->osd + OSD_MAIN_CHN; |
| zcrtc->chncsc = vou->osd + MAIN_CHN_CSC_OFFSET; |
| zcrtc->dither = vou->osd + MAIN_DITHER_OFFSET; |
| zcrtc->regs = &main_crtc_regs; |
| zcrtc->bits = &main_crtc_bits; |
| } else { |
| zplane->layer = vou->osd + AUX_GL_OFFSET; |
| zplane->csc = vou->osd + AUX_GL_CSC_OFFSET; |
| zplane->hbsc = vou->osd + AUX_HBSC_OFFSET; |
| zplane->rsz = vou->otfppu + AUX_RSZ_OFFSET; |
| zplane->bits = &zx_gl_bits[1]; |
| zcrtc->chnreg = vou->osd + OSD_AUX_CHN; |
| zcrtc->chncsc = vou->osd + AUX_CHN_CSC_OFFSET; |
| zcrtc->dither = vou->osd + AUX_DITHER_OFFSET; |
| zcrtc->regs = &aux_crtc_regs; |
| zcrtc->bits = &aux_crtc_bits; |
| } |
| |
| zcrtc->pixclk = devm_clk_get(dev, (chn_type == VOU_CHN_MAIN) ? |
| "main_wclk" : "aux_wclk"); |
| if (IS_ERR(zcrtc->pixclk)) { |
| ret = PTR_ERR(zcrtc->pixclk); |
| DRM_DEV_ERROR(dev, "failed to get pix clk: %d\n", ret); |
| return ret; |
| } |
| |
| ret = zx_plane_init(drm, zplane, DRM_PLANE_TYPE_PRIMARY); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to init primary plane: %d\n", ret); |
| return ret; |
| } |
| |
| zcrtc->primary = &zplane->plane; |
| |
| ret = drm_crtc_init_with_planes(drm, &zcrtc->crtc, zcrtc->primary, NULL, |
| &zx_crtc_funcs, NULL); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to init drm crtc: %d\n", ret); |
| return ret; |
| } |
| |
| drm_crtc_helper_add(&zcrtc->crtc, &zx_crtc_helper_funcs); |
| |
| if (chn_type == VOU_CHN_MAIN) |
| vou->main_crtc = zcrtc; |
| else |
| vou->aux_crtc = zcrtc; |
| |
| return 0; |
| } |
| |
| void zx_vou_layer_enable(struct drm_plane *plane) |
| { |
| struct zx_crtc *zcrtc = to_zx_crtc(plane->state->crtc); |
| struct zx_vou_hw *vou = zcrtc->vou; |
| struct zx_plane *zplane = to_zx_plane(plane); |
| const struct vou_layer_bits *bits = zplane->bits; |
| |
| if (zcrtc->chn_type == VOU_CHN_MAIN) { |
| zx_writel_mask(vou->osd + OSD_CTRL0, bits->chnsel, 0); |
| zx_writel_mask(vou->vouctl + VOU_CLK_SEL, bits->clksel, 0); |
| } else { |
| zx_writel_mask(vou->osd + OSD_CTRL0, bits->chnsel, |
| bits->chnsel); |
| zx_writel_mask(vou->vouctl + VOU_CLK_SEL, bits->clksel, |
| bits->clksel); |
| } |
| |
| zx_writel_mask(vou->osd + OSD_CTRL0, bits->enable, bits->enable); |
| } |
| |
| void zx_vou_layer_disable(struct drm_plane *plane) |
| { |
| struct zx_crtc *zcrtc = to_zx_crtc(plane->crtc); |
| struct zx_vou_hw *vou = zcrtc->vou; |
| struct zx_plane *zplane = to_zx_plane(plane); |
| const struct vou_layer_bits *bits = zplane->bits; |
| |
| zx_writel_mask(vou->osd + OSD_CTRL0, bits->enable, 0); |
| } |
| |
| static void zx_overlay_init(struct drm_device *drm, struct zx_vou_hw *vou) |
| { |
| struct device *dev = vou->dev; |
| struct zx_plane *zplane; |
| int i; |
| int ret; |
| |
| /* |
| * VL0 has some quirks on scaling support which need special handling. |
| * Let's leave it out for now. |
| */ |
| for (i = 1; i < VL_NUM; i++) { |
| zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL); |
| if (!zplane) { |
| DRM_DEV_ERROR(dev, "failed to allocate zplane %d\n", i); |
| return; |
| } |
| |
| zplane->layer = vou->osd + OSD_VL_OFFSET(i); |
| zplane->hbsc = vou->osd + HBSC_VL_OFFSET(i); |
| zplane->rsz = vou->otfppu + RSZ_VL_OFFSET(i); |
| zplane->bits = &zx_vl_bits[i]; |
| |
| ret = zx_plane_init(drm, zplane, DRM_PLANE_TYPE_OVERLAY); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to init overlay %d\n", i); |
| continue; |
| } |
| } |
| } |
| |
| static inline void zx_osd_int_update(struct zx_crtc *zcrtc) |
| { |
| struct drm_crtc *crtc = &zcrtc->crtc; |
| struct drm_plane *plane; |
| |
| vou_chn_set_update(zcrtc); |
| |
| drm_for_each_plane_mask(plane, crtc->dev, crtc->state->plane_mask) |
| zx_plane_set_update(plane); |
| } |
| |
| static irqreturn_t vou_irq_handler(int irq, void *dev_id) |
| { |
| struct zx_vou_hw *vou = dev_id; |
| u32 state; |
| |
| /* Handle TIMING_CTRL frame interrupts */ |
| state = zx_readl(vou->timing + TIMING_INT_STATE); |
| zx_writel(vou->timing + TIMING_INT_STATE, state); |
| |
| if (state & TIMING_INT_MAIN_FRAME) |
| drm_crtc_handle_vblank(&vou->main_crtc->crtc); |
| |
| if (state & TIMING_INT_AUX_FRAME) |
| drm_crtc_handle_vblank(&vou->aux_crtc->crtc); |
| |
| /* Handle OSD interrupts */ |
| state = zx_readl(vou->osd + OSD_INT_STA); |
| zx_writel(vou->osd + OSD_INT_CLRSTA, state); |
| |
| if (state & OSD_INT_MAIN_UPT) |
| zx_osd_int_update(vou->main_crtc); |
| |
| if (state & OSD_INT_AUX_UPT) |
| zx_osd_int_update(vou->aux_crtc); |
| |
| if (state & OSD_INT_ERROR) |
| DRM_DEV_ERROR(vou->dev, "OSD ERROR: 0x%08x!\n", state); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void vou_dtrc_init(struct zx_vou_hw *vou) |
| { |
| /* Clear bit for bypass by ID */ |
| zx_writel_mask(vou->dtrc + DTRC_DETILE_CTRL, |
| TILE2RASTESCAN_BYPASS_MODE, 0); |
| |
| /* Select ARIDR mode */ |
| zx_writel_mask(vou->dtrc + DTRC_DETILE_CTRL, DETILE_ARIDR_MODE_MASK, |
| DETILE_ARID_IN_ARIDR); |
| |
| /* Bypass decompression for both frames */ |
| zx_writel_mask(vou->dtrc + DTRC_F0_CTRL, DTRC_DECOMPRESS_BYPASS, |
| DTRC_DECOMPRESS_BYPASS); |
| zx_writel_mask(vou->dtrc + DTRC_F1_CTRL, DTRC_DECOMPRESS_BYPASS, |
| DTRC_DECOMPRESS_BYPASS); |
| |
| /* Set up ARID register */ |
| zx_writel(vou->dtrc + DTRC_ARID, DTRC_ARID3(0xf) | DTRC_ARID2(0xe) | |
| DTRC_ARID1(0xf) | DTRC_ARID0(0xe)); |
| } |
| |
| static void vou_hw_init(struct zx_vou_hw *vou) |
| { |
| /* Release reset for all VOU modules */ |
| zx_writel(vou->vouctl + VOU_SOFT_RST, ~0); |
| |
| /* Enable all VOU module clocks */ |
| zx_writel(vou->vouctl + VOU_CLK_EN, ~0); |
| |
| /* Clear both OSD and TIMING_CTRL interrupt state */ |
| zx_writel(vou->osd + OSD_INT_CLRSTA, ~0); |
| zx_writel(vou->timing + TIMING_INT_STATE, ~0); |
| |
| /* Enable OSD and TIMING_CTRL interrrupts */ |
| zx_writel(vou->osd + OSD_INT_MSK, OSD_INT_ENABLE); |
| zx_writel(vou->timing + TIMING_INT_CTRL, TIMING_INT_ENABLE); |
| |
| /* Select GPC as input to gl/vl scaler as a sane default setting */ |
| zx_writel(vou->otfppu + OTFPPU_RSZ_DATA_SOURCE, 0x2a); |
| |
| /* |
| * Needs to reset channel and layer logic per frame when frame starts |
| * to get VOU work properly. |
| */ |
| zx_writel_mask(vou->osd + OSD_RST_CLR, RST_PER_FRAME, RST_PER_FRAME); |
| |
| vou_dtrc_init(vou); |
| } |
| |
| static int zx_crtc_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct drm_device *drm = data; |
| struct zx_vou_hw *vou; |
| struct resource *res; |
| int irq; |
| int ret; |
| |
| vou = devm_kzalloc(dev, sizeof(*vou), GFP_KERNEL); |
| if (!vou) |
| return -ENOMEM; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "osd"); |
| vou->osd = devm_ioremap_resource(dev, res); |
| if (IS_ERR(vou->osd)) { |
| ret = PTR_ERR(vou->osd); |
| DRM_DEV_ERROR(dev, "failed to remap osd region: %d\n", ret); |
| return ret; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "timing_ctrl"); |
| vou->timing = devm_ioremap_resource(dev, res); |
| if (IS_ERR(vou->timing)) { |
| ret = PTR_ERR(vou->timing); |
| DRM_DEV_ERROR(dev, "failed to remap timing_ctrl region: %d\n", |
| ret); |
| return ret; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dtrc"); |
| vou->dtrc = devm_ioremap_resource(dev, res); |
| if (IS_ERR(vou->dtrc)) { |
| ret = PTR_ERR(vou->dtrc); |
| DRM_DEV_ERROR(dev, "failed to remap dtrc region: %d\n", ret); |
| return ret; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vou_ctrl"); |
| vou->vouctl = devm_ioremap_resource(dev, res); |
| if (IS_ERR(vou->vouctl)) { |
| ret = PTR_ERR(vou->vouctl); |
| DRM_DEV_ERROR(dev, "failed to remap vou_ctrl region: %d\n", |
| ret); |
| return ret; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otfppu"); |
| vou->otfppu = devm_ioremap_resource(dev, res); |
| if (IS_ERR(vou->otfppu)) { |
| ret = PTR_ERR(vou->otfppu); |
| DRM_DEV_ERROR(dev, "failed to remap otfppu region: %d\n", ret); |
| return ret; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| vou->axi_clk = devm_clk_get(dev, "aclk"); |
| if (IS_ERR(vou->axi_clk)) { |
| ret = PTR_ERR(vou->axi_clk); |
| DRM_DEV_ERROR(dev, "failed to get axi_clk: %d\n", ret); |
| return ret; |
| } |
| |
| vou->ppu_clk = devm_clk_get(dev, "ppu_wclk"); |
| if (IS_ERR(vou->ppu_clk)) { |
| ret = PTR_ERR(vou->ppu_clk); |
| DRM_DEV_ERROR(dev, "failed to get ppu_clk: %d\n", ret); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(vou->axi_clk); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to enable axi_clk: %d\n", ret); |
| return ret; |
| } |
| |
| clk_prepare_enable(vou->ppu_clk); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to enable ppu_clk: %d\n", ret); |
| goto disable_axi_clk; |
| } |
| |
| vou->dev = dev; |
| dev_set_drvdata(dev, vou); |
| |
| vou_hw_init(vou); |
| |
| ret = devm_request_irq(dev, irq, vou_irq_handler, 0, "zx_vou", vou); |
| if (ret < 0) { |
| DRM_DEV_ERROR(dev, "failed to request vou irq: %d\n", ret); |
| goto disable_ppu_clk; |
| } |
| |
| ret = zx_crtc_init(drm, vou, VOU_CHN_MAIN); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to init main channel crtc: %d\n", |
| ret); |
| goto disable_ppu_clk; |
| } |
| |
| ret = zx_crtc_init(drm, vou, VOU_CHN_AUX); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to init aux channel crtc: %d\n", |
| ret); |
| goto disable_ppu_clk; |
| } |
| |
| zx_overlay_init(drm, vou); |
| |
| return 0; |
| |
| disable_ppu_clk: |
| clk_disable_unprepare(vou->ppu_clk); |
| disable_axi_clk: |
| clk_disable_unprepare(vou->axi_clk); |
| return ret; |
| } |
| |
| static void zx_crtc_unbind(struct device *dev, struct device *master, |
| void *data) |
| { |
| struct zx_vou_hw *vou = dev_get_drvdata(dev); |
| |
| clk_disable_unprepare(vou->axi_clk); |
| clk_disable_unprepare(vou->ppu_clk); |
| } |
| |
| static const struct component_ops zx_crtc_component_ops = { |
| .bind = zx_crtc_bind, |
| .unbind = zx_crtc_unbind, |
| }; |
| |
| static int zx_crtc_probe(struct platform_device *pdev) |
| { |
| return component_add(&pdev->dev, &zx_crtc_component_ops); |
| } |
| |
| static int zx_crtc_remove(struct platform_device *pdev) |
| { |
| component_del(&pdev->dev, &zx_crtc_component_ops); |
| return 0; |
| } |
| |
| static const struct of_device_id zx_crtc_of_match[] = { |
| { .compatible = "zte,zx296718-dpc", }, |
| { /* end */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, zx_crtc_of_match); |
| |
| struct platform_driver zx_crtc_driver = { |
| .probe = zx_crtc_probe, |
| .remove = zx_crtc_remove, |
| .driver = { |
| .name = "zx-crtc", |
| .of_match_table = zx_crtc_of_match, |
| }, |
| }; |