| Platform DesignWare HS OTG USB 2.0 controller |
| ----------------------------------------------------- |
| |
| Required properties: |
| - compatible : One of: |
| - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. |
| - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC. |
| - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; |
| - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; |
| - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; |
| - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; |
| - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; |
| - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs; |
| - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs; |
| - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs; |
| - snps,dwc2: A generic DWC2 USB controller with default parameters. |
| - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs |
| configured in FS mode; |
| - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs |
| configured in HS mode; |
| - reg : Should contain 1 register range (address and length) |
| - interrupts : Should contain 1 interrupt |
| - clocks: clock provider specifier |
| - clock-names: shall be "otg" |
| Refer to clk/clock-bindings.txt for generic clock consumer properties |
| |
| Optional properties: |
| - phys: phy provider specifier |
| - phy-names: shall be "usb2-phy" |
| Refer to phy/phy-bindings.txt for generic phy consumer properties |
| - dr_mode: shall be one of "host", "peripheral" and "otg" |
| Refer to usb/generic.txt |
| - g-rx-fifo-size: size of rx fifo size in gadget mode. |
| - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. |
| - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. |
| |
| Deprecated properties: |
| - g-use-dma: gadget DMA mode is automatically detected |
| |
| Example: |
| |
| usb@101c0000 { |
| compatible = "ralink,rt3050-usb, snps,dwc2"; |
| reg = <0x101c0000 40000>; |
| interrupts = <18>; |
| clocks = <&usb_otg_ahb_clk>; |
| clock-names = "otg"; |
| phys = <&usbphy>; |
| phy-names = "usb2-phy"; |
| }; |