blob: 37d66c87abc97cb7b5680143c46f70f5c3194330 [file] [log] [blame]
/*******************************************************************************
*
* Intel Ethernet Controller XL710 Family Linux Driver
* Copyright(c) 2013 - 2014 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Contact Information:
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
******************************************************************************/
#include "i40e_prototype.h"
/**
* i40e_init_nvm_ops - Initialize NVM function pointers.
* @hw: pointer to the HW structure.
*
* Setups the function pointers and the NVM info structure. Should be called
* once per NVM initialization, e.g. inside the i40e_init_shared_code().
* Please notice that the NVM term is used here (& in all methods covered
* in this file) as an equivalent of the FLASH part mapped into the SR.
* We are accessing FLASH always thru the Shadow RAM.
**/
i40e_status i40e_init_nvm(struct i40e_hw *hw)
{
struct i40e_nvm_info *nvm = &hw->nvm;
i40e_status ret_code = 0;
u32 fla, gens;
u8 sr_size;
/* The SR size is stored regardless of the nvm programming mode
* as the blank mode may be used in the factory line.
*/
gens = rd32(hw, I40E_GLNVM_GENS);
sr_size = ((gens & I40E_GLNVM_GENS_SR_SIZE_MASK) >>
I40E_GLNVM_GENS_SR_SIZE_SHIFT);
/* Switching to words (sr_size contains power of 2KB). */
nvm->sr_size = (1 << sr_size) * I40E_SR_WORDS_IN_1KB;
/* Check if we are in the normal or blank NVM programming mode. */
fla = rd32(hw, I40E_GLNVM_FLA);
if (fla & I40E_GLNVM_FLA_LOCKED_MASK) { /* Normal programming mode. */
/* Max NVM timeout. */
nvm->timeout = I40E_MAX_NVM_TIMEOUT;
nvm->blank_nvm_mode = false;
} else { /* Blank programming mode. */
nvm->blank_nvm_mode = true;
ret_code = I40E_ERR_NVM_BLANK_MODE;
hw_dbg(hw, "NVM init error: unsupported blank mode.\n");
}
return ret_code;
}
/**
* i40e_acquire_nvm - Generic request for acquiring the NVM ownership.
* @hw: pointer to the HW structure.
* @access: NVM access type (read or write).
*
* This function will request NVM ownership for reading
* via the proper Admin Command.
**/
i40e_status i40e_acquire_nvm(struct i40e_hw *hw,
enum i40e_aq_resource_access_type access)
{
i40e_status ret_code = 0;
u64 gtime, timeout;
u64 time = 0;
if (hw->nvm.blank_nvm_mode)
goto i40e_i40e_acquire_nvm_exit;
ret_code = i40e_aq_request_resource(hw, I40E_NVM_RESOURCE_ID, access,
0, &time, NULL);
/* Reading the Global Device Timer. */
gtime = rd32(hw, I40E_GLVFGEN_TIMER);
/* Store the timeout. */
hw->nvm.hw_semaphore_timeout = I40E_MS_TO_GTIME(time) + gtime;
if (ret_code) {
/* Set the polling timeout. */
if (time > I40E_MAX_NVM_TIMEOUT)
timeout = I40E_MS_TO_GTIME(I40E_MAX_NVM_TIMEOUT)
+ gtime;
else
timeout = hw->nvm.hw_semaphore_timeout;
/* Poll until the current NVM owner timeouts. */
while (gtime < timeout) {
usleep_range(10000, 20000);
ret_code = i40e_aq_request_resource(hw,
I40E_NVM_RESOURCE_ID,
access, 0, &time,
NULL);
if (!ret_code) {
hw->nvm.hw_semaphore_timeout =
I40E_MS_TO_GTIME(time) + gtime;
break;
}
gtime = rd32(hw, I40E_GLVFGEN_TIMER);
}
if (ret_code) {
hw->nvm.hw_semaphore_timeout = 0;
hw->nvm.hw_semaphore_wait =
I40E_MS_TO_GTIME(time) + gtime;
hw_dbg(hw, "NVM acquire timed out, wait %llu ms before trying again.\n",
time);
}
}
i40e_i40e_acquire_nvm_exit:
return ret_code;
}
/**
* i40e_release_nvm - Generic request for releasing the NVM ownership.
* @hw: pointer to the HW structure.
*
* This function will release NVM resource via the proper Admin Command.
**/
void i40e_release_nvm(struct i40e_hw *hw)
{
if (!hw->nvm.blank_nvm_mode)
i40e_aq_release_resource(hw, I40E_NVM_RESOURCE_ID, 0, NULL);
}
/**
* i40e_poll_sr_srctl_done_bit - Polls the GLNVM_SRCTL done bit.
* @hw: pointer to the HW structure.
*
* Polls the SRCTL Shadow RAM register done bit.
**/
static i40e_status i40e_poll_sr_srctl_done_bit(struct i40e_hw *hw)
{
i40e_status ret_code = I40E_ERR_TIMEOUT;
u32 srctl, wait_cnt;
/* Poll the I40E_GLNVM_SRCTL until the done bit is set. */
for (wait_cnt = 0; wait_cnt < I40E_SRRD_SRCTL_ATTEMPTS; wait_cnt++) {
srctl = rd32(hw, I40E_GLNVM_SRCTL);
if (srctl & I40E_GLNVM_SRCTL_DONE_MASK) {
ret_code = 0;
break;
}
udelay(5);
}
if (ret_code == I40E_ERR_TIMEOUT)
hw_dbg(hw, "Done bit in GLNVM_SRCTL not set");
return ret_code;
}
/**
* i40e_read_nvm_word - Reads Shadow RAM
* @hw: pointer to the HW structure.
* @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
* @data: word read from the Shadow RAM.
*
* Reads 16 bit word from the Shadow RAM using the GLNVM_SRCTL register.
**/
i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
u16 *data)
{
i40e_status ret_code = I40E_ERR_TIMEOUT;
u32 sr_reg;
if (offset >= hw->nvm.sr_size) {
hw_dbg(hw, "NVM read error: Offset beyond Shadow RAM limit.\n");
ret_code = I40E_ERR_PARAM;
goto read_nvm_exit;
}
/* Poll the done bit first. */
ret_code = i40e_poll_sr_srctl_done_bit(hw);
if (!ret_code) {
/* Write the address and start reading. */
sr_reg = (u32)(offset << I40E_GLNVM_SRCTL_ADDR_SHIFT) |
(1 << I40E_GLNVM_SRCTL_START_SHIFT);
wr32(hw, I40E_GLNVM_SRCTL, sr_reg);
/* Poll I40E_GLNVM_SRCTL until the done bit is set. */
ret_code = i40e_poll_sr_srctl_done_bit(hw);
if (!ret_code) {
sr_reg = rd32(hw, I40E_GLNVM_SRDATA);
*data = (u16)((sr_reg &
I40E_GLNVM_SRDATA_RDDATA_MASK)
>> I40E_GLNVM_SRDATA_RDDATA_SHIFT);
}
}
if (ret_code)
hw_dbg(hw, "NVM read error: Couldn't access Shadow RAM address: 0x%x\n",
offset);
read_nvm_exit:
return ret_code;
}
/**
* i40e_read_nvm_buffer - Reads Shadow RAM buffer.
* @hw: pointer to the HW structure.
* @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF).
* @words: number of words to read (in) &
* number of words read before the NVM ownership timeout (out).
* @data: words read from the Shadow RAM.
*
* Reads 16 bit words (data buffer) from the SR using the i40e_read_nvm_srrd()
* method. The buffer read is preceded by the NVM ownership take
* and followed by the release.
**/
i40e_status i40e_read_nvm_buffer(struct i40e_hw *hw, u16 offset,
u16 *words, u16 *data)
{
i40e_status ret_code = 0;
u16 index, word;
/* Loop thru the selected region. */
for (word = 0; word < *words; word++) {
index = offset + word;
ret_code = i40e_read_nvm_word(hw, index, &data[word]);
if (ret_code)
break;
}
/* Update the number of words read from the Shadow RAM. */
*words = word;
return ret_code;
}
/**
* i40e_calc_nvm_checksum - Calculates and returns the checksum
* @hw: pointer to hardware structure
*
* This function calculate SW Checksum that covers the whole 64kB shadow RAM
* except the VPD and PCIe ALT Auto-load modules. The structure and size of VPD
* is customer specific and unknown. Therefore, this function skips all maximum
* possible size of VPD (1kB).
**/
static i40e_status i40e_calc_nvm_checksum(struct i40e_hw *hw,
u16 *checksum)
{
i40e_status ret_code = 0;
u16 pcie_alt_module = 0;
u16 checksum_local = 0;
u16 vpd_module = 0;
u16 word = 0;
u32 i = 0;
/* read pointer to VPD area */
ret_code = i40e_read_nvm_word(hw, I40E_SR_VPD_PTR, &vpd_module);
if (ret_code) {
ret_code = I40E_ERR_NVM_CHECKSUM;
goto i40e_calc_nvm_checksum_exit;
}
/* read pointer to PCIe Alt Auto-load module */
ret_code = i40e_read_nvm_word(hw, I40E_SR_PCIE_ALT_AUTO_LOAD_PTR,
&pcie_alt_module);
if (ret_code) {
ret_code = I40E_ERR_NVM_CHECKSUM;
goto i40e_calc_nvm_checksum_exit;
}
/* Calculate SW checksum that covers the whole 64kB shadow RAM
* except the VPD and PCIe ALT Auto-load modules
*/
for (i = 0; i < hw->nvm.sr_size; i++) {
/* Skip Checksum word */
if (i == I40E_SR_SW_CHECKSUM_WORD)
i++;
/* Skip VPD module (convert byte size to word count) */
if (i == (u32)vpd_module) {
i += (I40E_SR_VPD_MODULE_MAX_SIZE / 2);
if (i >= hw->nvm.sr_size)
break;
}
/* Skip PCIe ALT module (convert byte size to word count) */
if (i == (u32)pcie_alt_module) {
i += (I40E_SR_PCIE_ALT_MODULE_MAX_SIZE / 2);
if (i >= hw->nvm.sr_size)
break;
}
ret_code = i40e_read_nvm_word(hw, (u16)i, &word);
if (ret_code) {
ret_code = I40E_ERR_NVM_CHECKSUM;
goto i40e_calc_nvm_checksum_exit;
}
checksum_local += word;
}
*checksum = (u16)I40E_SR_SW_CHECKSUM_BASE - checksum_local;
i40e_calc_nvm_checksum_exit:
return ret_code;
}
/**
* i40e_validate_nvm_checksum - Validate EEPROM checksum
* @hw: pointer to hardware structure
* @checksum: calculated checksum
*
* Performs checksum calculation and validates the NVM SW checksum. If the
* caller does not need checksum, the value can be NULL.
**/
i40e_status i40e_validate_nvm_checksum(struct i40e_hw *hw,
u16 *checksum)
{
i40e_status ret_code = 0;
u16 checksum_sr = 0;
u16 checksum_local;
ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
if (ret_code)
goto i40e_validate_nvm_checksum_exit;
ret_code = i40e_calc_nvm_checksum(hw, &checksum_local);
if (ret_code)
goto i40e_validate_nvm_checksum_free;
/* Do not use i40e_read_nvm_word() because we do not want to take
* the synchronization semaphores twice here.
*/
i40e_read_nvm_word(hw, I40E_SR_SW_CHECKSUM_WORD, &checksum_sr);
/* Verify read checksum from EEPROM is the same as
* calculated checksum
*/
if (checksum_local != checksum_sr)
ret_code = I40E_ERR_NVM_CHECKSUM;
/* If the user cares, return the calculated checksum */
if (checksum)
*checksum = checksum_local;
i40e_validate_nvm_checksum_free:
i40e_release_nvm(hw);
i40e_validate_nvm_checksum_exit:
return ret_code;
}