| menu "Kernel hacking" |
| |
| source "lib/Kconfig.debug" |
| |
| config ARM_PTDUMP |
| bool "Export kernel pagetable layout to userspace via debugfs" |
| depends on DEBUG_KERNEL |
| select DEBUG_FS |
| ---help--- |
| Say Y here if you want to show the kernel pagetable layout in a |
| debugfs file. This information is only useful for kernel developers |
| who are working in architecture specific areas of the kernel. |
| It is probably not a good idea to enable this feature in a production |
| kernel. |
| If in doubt, say "N" |
| |
| config STRICT_DEVMEM |
| bool "Filter access to /dev/mem" |
| depends on MMU |
| ---help--- |
| If this option is disabled, you allow userspace (root) access to all |
| of memory, including kernel and userspace memory. Accidental |
| access to this is obviously disastrous, but specific access can |
| be used by people debugging the kernel. |
| |
| If this option is switched on, the /dev/mem file only allows |
| userspace access to memory mapped peripherals. |
| |
| If in doubt, say Y. |
| |
| # RMK wants arm kernels compiled with frame pointers or stack unwinding. |
| # If you know what you are doing and are willing to live without stack |
| # traces, you can get a slightly smaller kernel by setting this option to |
| # n, but then RMK will have to kill you ;). |
| config FRAME_POINTER |
| bool |
| depends on !THUMB2_KERNEL |
| default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER |
| help |
| If you say N here, the resulting kernel will be slightly smaller and |
| faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, |
| when a problem occurs with the kernel, the information that is |
| reported is severely limited. |
| |
| config ARM_UNWIND |
| bool "Enable stack unwinding support (EXPERIMENTAL)" |
| depends on AEABI |
| default y |
| help |
| This option enables stack unwinding support in the kernel |
| using the information automatically generated by the |
| compiler. The resulting kernel image is slightly bigger but |
| the performance is not affected. Currently, this feature |
| only works with EABI compilers. If unsure say Y. |
| |
| config OLD_MCOUNT |
| bool |
| depends on FUNCTION_TRACER && FRAME_POINTER |
| default y |
| |
| config DEBUG_USER |
| bool "Verbose user fault messages" |
| help |
| When a user program crashes due to an exception, the kernel can |
| print a brief message explaining what the problem was. This is |
| sometimes helpful for debugging but serves no purpose on a |
| production system. Most people should say N here. |
| |
| In addition, you need to pass user_debug=N on the kernel command |
| line to enable this feature. N consists of the sum of: |
| |
| 1 - undefined instruction events |
| 2 - system calls |
| 4 - invalid data aborts |
| 8 - SIGSEGV faults |
| 16 - SIGBUS faults |
| |
| # These options are only for real kernel hackers who want to get their hands dirty. |
| config DEBUG_LL |
| bool "Kernel low-level debugging functions (read help!)" |
| depends on DEBUG_KERNEL |
| help |
| Say Y here to include definitions of printascii, printch, printhex |
| in the kernel. This is helpful if you are debugging code that |
| executes before the console is initialized. |
| |
| Note that selecting this option will limit the kernel to a single |
| UART definition, as specified below. Attempting to boot the kernel |
| image on a different platform *will not work*, so this option should |
| not be enabled for kernels that are intended to be portable. |
| |
| choice |
| prompt "Kernel low-level debugging port" |
| depends on DEBUG_LL |
| |
| config AT91_DEBUG_LL_DBGU0 |
| bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" |
| depends on HAVE_AT91_DBGU0 |
| |
| config AT91_DEBUG_LL_DBGU1 |
| bool "Kernel low-level debugging on 9263 and 9g45" |
| depends on HAVE_AT91_DBGU1 |
| |
| config DEBUG_BCM2835 |
| bool "Kernel low-level debugging on BCM2835 PL011 UART" |
| depends on ARCH_BCM2835 |
| select DEBUG_UART_PL01X |
| |
| config DEBUG_CLPS711X_UART1 |
| bool "Kernel low-level debugging messages via UART1" |
| depends on ARCH_CLPS711X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the first serial port on these devices. |
| |
| config DEBUG_CLPS711X_UART2 |
| bool "Kernel low-level debugging messages via UART2" |
| depends on ARCH_CLPS711X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the second serial port on these devices. |
| |
| config DEBUG_CNS3XXX |
| bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" |
| depends on ARCH_CNS3XXX |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the CNS3xxx UART0. |
| |
| config DEBUG_DAVINCI_DA8XX_UART1 |
| bool "Kernel low-level debugging on DaVinci DA8XX using UART1" |
| depends on ARCH_DAVINCI_DA8XX |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 serial port on DaVinci DA8XX devices. |
| |
| config DEBUG_DAVINCI_DA8XX_UART2 |
| bool "Kernel low-level debugging on DaVinci DA8XX using UART2" |
| depends on ARCH_DAVINCI_DA8XX |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART2 serial port on DaVinci DA8XX devices. |
| |
| config DEBUG_DAVINCI_DMx_UART0 |
| bool "Kernel low-level debugging on DaVinci DMx using UART0" |
| depends on ARCH_DAVINCI_DMx |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART0 serial port on DaVinci DMx devices. |
| |
| config DEBUG_DAVINCI_TNETV107X_UART1 |
| bool "Kernel low-level debugging on DaVinci TNETV107x using UART1" |
| depends on ARCH_DAVINCI_TNETV107X |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 serial port on DaVinci TNETV107X |
| devices. |
| |
| config DEBUG_ZYNQ_UART0 |
| bool "Kernel low-level debugging on Xilinx Zynq using UART0" |
| depends on ARCH_ZYNQ |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART0 on the Zynq platform. |
| |
| config DEBUG_ZYNQ_UART1 |
| bool "Kernel low-level debugging on Xilinx Zynq using UART1" |
| depends on ARCH_ZYNQ |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 on the Zynq platform. |
| |
| If you have a ZC702 board and want early boot messages to |
| appear on the USB serial adaptor, select this option. |
| |
| config DEBUG_DC21285_PORT |
| bool "Kernel low-level debugging messages via footbridge serial port" |
| depends on FOOTBRIDGE |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port in the DC21285 (Footbridge). |
| |
| config DEBUG_FOOTBRIDGE_COM1 |
| bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" |
| depends on FOOTBRIDGE |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the 8250 at PCI COM1. |
| |
| config DEBUG_HI3620_UART |
| bool "Hisilicon HI3620 Debug UART" |
| depends on ARCH_HI3xxx |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on HI3620 UART. |
| |
| config DEBUG_HI3716_UART |
| bool "Hisilicon Hi3716 Debug UART" |
| depends on ARCH_HI3xxx |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on HI3716 UART. |
| |
| config DEBUG_HIGHBANK_UART |
| bool "Kernel low-level debugging messages via Highbank UART" |
| depends on ARCH_HIGHBANK |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the UART on Highbank based devices. |
| |
| config DEBUG_IMX1_UART |
| bool "i.MX1 Debug UART" |
| depends on SOC_IMX1 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX1. |
| |
| config DEBUG_IMX23_UART |
| bool "i.MX23 Debug UART" |
| depends on SOC_IMX23 |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX23. |
| |
| config DEBUG_IMX25_UART |
| bool "i.MX25 Debug UART" |
| depends on SOC_IMX25 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX25. |
| |
| config DEBUG_IMX21_IMX27_UART |
| bool "i.MX21 and i.MX27 Debug UART" |
| depends on SOC_IMX21 || SOC_IMX27 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX21 or i.MX27. |
| |
| config DEBUG_IMX28_UART |
| bool "i.MX28 Debug UART" |
| depends on SOC_IMX28 |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX28. |
| |
| config DEBUG_IMX31_UART |
| bool "i.MX31 Debug UART" |
| depends on SOC_IMX31 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX31. |
| |
| config DEBUG_IMX35_UART |
| bool "i.MX35 Debug UART" |
| depends on SOC_IMX35 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX35. |
| |
| config DEBUG_IMX51_UART |
| bool "i.MX51 Debug UART" |
| depends on SOC_IMX51 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX51. |
| |
| config DEBUG_IMX53_UART |
| bool "i.MX53 Debug UART" |
| depends on SOC_IMX53 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX53. |
| |
| config DEBUG_IMX6Q_UART |
| bool "i.MX6Q/DL Debug UART" |
| depends on SOC_IMX6Q |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX6Q/DL. |
| |
| config DEBUG_IMX6SL_UART |
| bool "i.MX6SL Debug UART" |
| depends on SOC_IMX6SL |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX6SL. |
| |
| config DEBUG_KEYSTONE_UART0 |
| bool "Kernel low-level debugging on KEYSTONE2 using UART0" |
| depends on ARCH_KEYSTONE |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART0 serial port on KEYSTONE2 devices. |
| |
| config DEBUG_KEYSTONE_UART1 |
| bool "Kernel low-level debugging on KEYSTONE2 using UART1" |
| depends on ARCH_KEYSTONE |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 serial port on KEYSTONE2 devices. |
| |
| config DEBUG_MMP_UART2 |
| bool "Kernel low-level debugging message via MMP UART2" |
| depends on ARCH_MMP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MMP UART2. |
| |
| config DEBUG_MMP_UART3 |
| bool "Kernel low-level debugging message via MMP UART3" |
| depends on ARCH_MMP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MMP UART3. |
| |
| config DEBUG_MSM_UART1 |
| bool "Kernel low-level debugging messages via MSM UART1" |
| depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 |
| select DEBUG_MSM_UART |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the first serial port on MSM devices. |
| |
| config DEBUG_MSM_UART2 |
| bool "Kernel low-level debugging messages via MSM UART2" |
| depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 |
| select DEBUG_MSM_UART |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the second serial port on MSM devices. |
| |
| config DEBUG_MSM_UART3 |
| bool "Kernel low-level debugging messages via MSM UART3" |
| depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 |
| select DEBUG_MSM_UART |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the third serial port on MSM devices. |
| |
| config DEBUG_MSM8660_UART |
| bool "Kernel low-level debugging messages via MSM 8660 UART" |
| depends on ARCH_MSM8X60 |
| select MSM_HAS_DEBUG_UART_HS |
| select DEBUG_MSM_UART |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MSM 8660 devices. |
| |
| config DEBUG_MSM8960_UART |
| bool "Kernel low-level debugging messages via MSM 8960 UART" |
| depends on ARCH_MSM8960 |
| select MSM_HAS_DEBUG_UART_HS |
| select DEBUG_MSM_UART |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MSM 8960 devices. |
| |
| config DEBUG_MSM8974_UART |
| bool "Kernel low-level debugging messages via MSM 8974 UART" |
| depends on ARCH_MSM8974 |
| select MSM_HAS_DEBUG_UART_HS |
| select DEBUG_MSM_UART |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MSM 8974 devices. |
| |
| config DEBUG_MVEBU_UART |
| bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" |
| depends on ARCH_MVEBU |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MVEBU based platforms. |
| |
| This option should be used with the old bootloaders |
| that left the internal registers mapped at |
| 0xd0000000. As of today, this is the case on |
| platforms such as the Globalscale Mirabox or the |
| Plathome OpenBlocks AX3, when using the original |
| bootloader. |
| |
| If the wrong DEBUG_MVEBU_UART* option is selected, |
| when u-boot hands over to the kernel, the system |
| silently crashes, with no serial output at all. |
| |
| config DEBUG_MVEBU_UART_ALTERNATE |
| bool "Kernel low-level debugging messages via MVEBU UART (new bootloaders)" |
| depends on ARCH_MVEBU |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MVEBU based platforms. |
| |
| This option should be used with the new bootloaders |
| that remap the internal registers at 0xf1000000. |
| |
| If the wrong DEBUG_MVEBU_UART* option is selected, |
| when u-boot hands over to the kernel, the system |
| silently crashes, with no serial output at all. |
| |
| config DEBUG_VF_UART |
| bool "Vybrid UART" |
| depends on SOC_VF610 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Vybrid based platforms. |
| |
| config DEBUG_NOMADIK_UART |
| bool "Kernel low-level debugging messages via NOMADIK UART" |
| depends on ARCH_NOMADIK |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on NOMADIK based platforms. |
| |
| config DEBUG_NSPIRE_CLASSIC_UART |
| bool "Kernel low-level debugging via TI-NSPIRE 8250 UART" |
| depends on ARCH_NSPIRE |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on TI-NSPIRE classic models. |
| |
| config DEBUG_NSPIRE_CX_UART |
| bool "Kernel low-level debugging via TI-NSPIRE PL011 UART" |
| depends on ARCH_NSPIRE |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on TI-NSPIRE CX models. |
| |
| config DEBUG_OMAP2UART1 |
| bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| help |
| This covers at least h4, 2430sdp, 3430sdp, 3630sdp, |
| omap3 torpedo and 3530 lv som. |
| |
| config DEBUG_OMAP2UART2 |
| bool "Kernel low-level debugging messages via OMAP2/3/4 UART2" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_OMAP2UART3 |
| bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_OMAP3UART3 |
| bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| help |
| This covers at least cm_t3x, beagle, crane, devkit8000, |
| igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, |
| and 3517evm. |
| |
| config DEBUG_OMAP4UART3 |
| bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_OMAP3UART4 |
| bool "Kernel low-level debugging messages via OMAP36XX UART4" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_OMAP4UART4 |
| bool "Kernel low-level debugging messages via OMAP4/5 UART4" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_TI81XXUART1 |
| bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_TI81XXUART2 |
| bool "Kernel low-level debugging messages via TI81XX UART2" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_TI81XXUART3 |
| bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_AM33XXUART1 |
| bool "Kernel low-level debugging messages via AM33XX UART1" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_ZOOM_UART |
| bool "Kernel low-level debugging messages via Zoom2/3 UART" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_PICOXCELL_UART |
| depends on ARCH_PICOXCELL |
| bool "Use PicoXcell UART for low-level debug" |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on PicoXcell based platforms. |
| |
| config DEBUG_PXA_UART1 |
| depends on ARCH_PXA |
| bool "Use PXA UART1 for low-level debug" |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on PXA UART1. |
| |
| config DEBUG_REALVIEW_STD_PORT |
| bool "RealView Default UART" |
| depends on ARCH_REALVIEW |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on RealView EB, PB11MP, PBA8 |
| and PBX platforms. |
| |
| config DEBUG_REALVIEW_PB1176_PORT |
| bool "RealView PB1176 UART" |
| depends on MACH_REALVIEW_PB1176 |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the standard serial port on the RealView |
| PB1176 platform. |
| |
| config DEBUG_RK29_UART0 |
| bool "Kernel low-level debugging messages via Rockchip RK29 UART0" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK29_UART1 |
| bool "Kernel low-level debugging messages via Rockchip RK29 UART1" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK29_UART2 |
| bool "Kernel low-level debugging messages via Rockchip RK29 UART2" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK3X_UART0 |
| bool "Kernel low-level debugging messages via Rockchip RK3X UART0" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK3X_UART1 |
| bool "Kernel low-level debugging messages via Rockchip RK3X UART1" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK3X_UART2 |
| bool "Kernel low-level debugging messages via Rockchip RK3X UART2" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK3X_UART3 |
| bool "Kernel low-level debugging messages via Rockchip RK3X UART3" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_S3C_UART0 |
| depends on PLAT_SAMSUNG |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| bool "Use S3C UART 0 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 0. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_S3C_UART1 |
| depends on PLAT_SAMSUNG |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| bool "Use S3C UART 1 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 1. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_S3C_UART2 |
| depends on PLAT_SAMSUNG |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| bool "Use S3C UART 2 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 2. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_S3C_UART3 |
| depends on PLAT_SAMSUNG && ARCH_EXYNOS |
| select DEBUG_EXYNOS_UART |
| bool "Use S3C UART 3 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 3. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_SOCFPGA_UART |
| depends on ARCH_SOCFPGA |
| bool "Use SOCFPGA UART for low-level debug" |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on SOCFPGA based platforms. |
| |
| config DEBUG_SUNXI_UART0 |
| bool "Kernel low-level debugging messages via sunXi UART0" |
| depends on ARCH_SUNXI |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Allwinner A1X based platforms on the UART0. |
| |
| config DEBUG_SUNXI_UART1 |
| bool "Kernel low-level debugging messages via sunXi UART1" |
| depends on ARCH_SUNXI |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Allwinner A1X based platforms on the UART1. |
| |
| config TEGRA_DEBUG_UART_AUTO_ODMDATA |
| bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Automatically determines which UART to use for low-level |
| debug based on the ODMDATA value. This value is part of |
| the BCT, and is written to the boot memory device using |
| nvflash, or other flashing tool. When bits 19:18 are 3, |
| then bits 17:15 indicate which UART to use; 0/1/2/3/4 |
| are UART A/B/C/D/E. |
| |
| config TEGRA_DEBUG_UARTA |
| bool "Kernel low-level debugging messages via Tegra UART A" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config TEGRA_DEBUG_UARTB |
| bool "Kernel low-level debugging messages via Tegra UART B" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config TEGRA_DEBUG_UARTC |
| bool "Kernel low-level debugging messages via Tegra UART C" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config TEGRA_DEBUG_UARTD |
| bool "Kernel low-level debugging messages via Tegra UART D" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config TEGRA_DEBUG_UARTE |
| bool "Kernel low-level debugging messages via Tegra UART E" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config DEBUG_SIRFPRIMA2_UART1 |
| bool "Kernel low-level debugging messages via SiRFprimaII UART1" |
| depends on ARCH_PRIMA2 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the uart1 port on SiRFprimaII devices. |
| |
| config DEBUG_SIRFMARCO_UART1 |
| bool "Kernel low-level debugging messages via SiRFmarco UART1" |
| depends on ARCH_MARCO |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the uart1 port on SiRFmarco devices. |
| |
| config STIH41X_DEBUG_ASC2 |
| bool "Use StiH415/416 ASC2 UART for low-level debug" |
| depends on ARCH_STI |
| select DEBUG_STI_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on STiH415/416 based platforms like b2000, which has |
| default UART wired up to ASC2. |
| |
| If unsure, say N. |
| |
| config STIH41X_DEBUG_SBC_ASC1 |
| bool "Use StiH415/416 SBC ASC1 UART for low-level debug" |
| depends on ARCH_STI |
| select DEBUG_STI_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on STiH415/416 based platforms like b2020. which has |
| default UART wired up to SBC ASC1. |
| |
| If unsure, say N. |
| |
| config DEBUG_U300_UART |
| bool "Kernel low-level debugging messages via U300 UART0" |
| depends on ARCH_U300 |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the uart port on U300 devices. |
| |
| config DEBUG_UX500_UART |
| depends on ARCH_U8500 |
| bool "Use Ux500 UART for low-level debug" |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Ux500 based platforms. |
| |
| config DEBUG_VEXPRESS_UART0_DETECT |
| bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" |
| depends on ARCH_VEXPRESS && CPU_CP15_MMU |
| help |
| This option enables a simple heuristic which tries to determine |
| the motherboard's memory map variant (original or RS1) and then |
| choose the relevant UART0 base address. |
| |
| Note that this will only work with standard A-class core tiles, |
| and may fail with non-standard SMM or custom software models. |
| |
| config DEBUG_VEXPRESS_UART0_CA9 |
| bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" |
| depends on ARCH_VEXPRESS |
| select DEBUG_UART_PL01X |
| help |
| This option selects UART0 at 0x10009000. Except for custom models, |
| this applies only to the V2P-CA9 tile. |
| |
| config DEBUG_VEXPRESS_UART0_RS1 |
| bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" |
| depends on ARCH_VEXPRESS |
| select DEBUG_UART_PL01X |
| help |
| This option selects UART0 at 0x1c090000. This applies to most |
| of the tiles using the RS1 memory map, including all new A-class |
| core tiles, FPGA-based SMMs and software models. |
| |
| config DEBUG_VEXPRESS_UART0_CRX |
| bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)" |
| depends on ARCH_VEXPRESS && !MMU |
| select DEBUG_UART_PL01X |
| help |
| This option selects UART0 at 0xb0090000. This is appropriate for |
| Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 |
| |
| config DEBUG_VT8500_UART0 |
| bool "Use UART0 on VIA/Wondermedia SoCs" |
| depends on ARCH_VT8500 |
| help |
| This option selects UART0 on VIA/Wondermedia System-on-a-chip |
| devices, including VT8500, WM8505, WM8650 and WM8850. |
| |
| config DEBUG_LL_UART_NONE |
| bool "No low-level debugging UART" |
| depends on !ARCH_MULTIPLATFORM |
| help |
| Say Y here if your platform doesn't provide a UART option |
| above. This relies on your platform choosing the right UART |
| definition internally in order for low-level debugging to |
| work. |
| |
| config DEBUG_ICEDCC |
| bool "Kernel low-level debugging via EmbeddedICE DCC channel" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the EmbeddedICE macrocell's DCC channel using |
| co-processor 14. This is known to work on the ARM9 style ICE |
| channel and on the XScale with the PEEDI. |
| |
| Note that the system will appear to hang during boot if there |
| is nothing connected to read from the DCC. |
| |
| config DEBUG_SEMIHOSTING |
| bool "Kernel low-level debug output via semihosting I/O" |
| help |
| Semihosting enables code running on an ARM target to use |
| the I/O facilities on a host debugger/emulator through a |
| simple SVC call. The host debugger or emulator must have |
| semihosting enabled for the special svc call to be trapped |
| otherwise the kernel will crash. |
| |
| This is known to work with OpenOCD, as well as |
| ARM's Fast Models, or any other controlling environment |
| that implements semihosting. |
| |
| For more details about semihosting, please see |
| chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. |
| |
| config DEBUG_LL_UART_8250 |
| bool "Kernel low-level debugging via 8250 UART" |
| help |
| Say Y here if you wish the debug print routes to direct |
| their output to an 8250 UART. You can use this option |
| to provide the parameters for the 8250 UART rather than |
| selecting one of the platform specific options above if |
| you know the parameters for the port. |
| |
| This option is preferred over the platform specific |
| options; the platform specific options are deprecated |
| and will be soon removed. |
| |
| config DEBUG_LL_UART_EFM32 |
| bool "Kernel low-level debugging via efm32 UART" |
| depends on ARCH_EFM32 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to an UART or USART port on efm32 based |
| machines. Use the following addresses for DEBUG_UART_PHYS: |
| |
| 0x4000c000 | USART0 |
| 0x4000c400 | USART1 |
| 0x4000c800 | USART2 |
| 0x4000e000 | UART0 |
| 0x4000e400 | UART1 |
| |
| config DEBUG_LL_UART_PL01X |
| bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" |
| help |
| Say Y here if you wish the debug print routes to direct |
| their output to a PL01x Primecell UART. You can use |
| this option to provide the parameters for the UART |
| rather than selecting one of the platform specific |
| options above if you know the parameters for the port. |
| |
| This option is preferred over the platform specific |
| options; the platform specific options are deprecated |
| and will be soon removed. |
| |
| endchoice |
| |
| config DEBUG_EXYNOS_UART |
| bool |
| |
| config DEBUG_OMAP2PLUS_UART |
| bool |
| depends on ARCH_OMAP2PLUS |
| |
| config DEBUG_IMX_UART_PORT |
| int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ |
| DEBUG_IMX25_UART || \ |
| DEBUG_IMX21_IMX27_UART || \ |
| DEBUG_IMX31_UART || \ |
| DEBUG_IMX35_UART || \ |
| DEBUG_IMX51_UART || \ |
| DEBUG_IMX53_UART || \ |
| DEBUG_IMX6Q_UART || \ |
| DEBUG_IMX6SL_UART |
| default 1 |
| depends on ARCH_MXC |
| help |
| Choose UART port on which kernel low-level debug messages |
| should be output. |
| |
| config DEBUG_TEGRA_UART |
| bool |
| depends on ARCH_TEGRA |
| |
| config DEBUG_STI_UART |
| bool |
| depends on ARCH_STI |
| |
| config DEBUG_MSM_UART |
| bool |
| depends on ARCH_MSM |
| |
| config DEBUG_LL_INCLUDE |
| string |
| default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 |
| default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X |
| default "debug/exynos.S" if DEBUG_EXYNOS_UART |
| default "debug/efm32.S" if DEBUG_LL_UART_EFM32 |
| default "debug/icedcc.S" if DEBUG_ICEDCC |
| default "debug/imx.S" if DEBUG_IMX1_UART || \ |
| DEBUG_IMX25_UART || \ |
| DEBUG_IMX21_IMX27_UART || \ |
| DEBUG_IMX31_UART || \ |
| DEBUG_IMX35_UART || \ |
| DEBUG_IMX51_UART || \ |
| DEBUG_IMX53_UART ||\ |
| DEBUG_IMX6Q_UART || \ |
| DEBUG_IMX6SL_UART |
| default "debug/msm.S" if DEBUG_MSM_UART |
| default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART |
| default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 |
| default "debug/sti.S" if DEBUG_STI_UART |
| default "debug/tegra.S" if DEBUG_TEGRA_UART |
| default "debug/ux500.S" if DEBUG_UX500_UART |
| default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT |
| default "debug/vf.S" if DEBUG_VF_UART |
| default "debug/vt8500.S" if DEBUG_VT8500_UART0 |
| default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 |
| default "mach/debug-macro.S" |
| |
| # Compatibility options for PL01x |
| config DEBUG_UART_PL01X |
| def_bool ARCH_EP93XX || \ |
| ARCH_INTEGRATOR || \ |
| ARCH_SPEAR3XX || \ |
| ARCH_SPEAR6XX || \ |
| ARCH_SPEAR13XX || \ |
| ARCH_VERSATILE |
| |
| # Compatibility options for 8250 |
| config DEBUG_UART_8250 |
| def_bool ARCH_DOVE || ARCH_EBSA110 || \ |
| (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ |
| ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ |
| ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \ |
| ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC |
| |
| config DEBUG_UART_PHYS |
| hex "Physical base address of debug UART" |
| default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 |
| default 0x01c28000 if DEBUG_SUNXI_UART0 |
| default 0x01c28400 if DEBUG_SUNXI_UART1 |
| default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 |
| default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2 |
| default 0x02530c00 if DEBUG_KEYSTONE_UART0 |
| default 0x02531000 if DEBUG_KEYSTONE_UART1 |
| default 0x03010fe0 if ARCH_RPC |
| default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1 |
| default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \ |
| DEBUG_VEXPRESS_UART0_CA9 |
| default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT |
| default 0x10124000 if DEBUG_RK3X_UART0 |
| default 0x10126000 if DEBUG_RK3X_UART1 |
| default 0x101f1000 if ARCH_VERSATILE |
| default 0x101fb000 if DEBUG_NOMADIK_UART |
| default 0x16000000 if ARCH_INTEGRATOR |
| default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 |
| default 0x20060000 if DEBUG_RK29_UART0 |
| default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 |
| default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 |
| default 0x20201000 if DEBUG_BCM2835 |
| default 0x4000e400 if DEBUG_LL_UART_EFM32 |
| default 0x40090000 if ARCH_LPC32XX |
| default 0x40100000 if DEBUG_PXA_UART1 |
| default 0x42000000 if ARCH_GEMINI |
| default 0x7c0003f8 if FOOTBRIDGE |
| default 0x80230000 if DEBUG_PICOXCELL_UART |
| default 0x80070000 if DEBUG_IMX23_UART |
| default 0x80074000 if DEBUG_IMX28_UART |
| default 0x808c0000 if ARCH_EP93XX |
| default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART |
| default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX |
| default 0xc0013000 if DEBUG_U300_UART |
| default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN |
| default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN |
| default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX |
| default 0xd0012000 if DEBUG_MVEBU_UART |
| default 0xd4017000 if DEBUG_MMP_UART2 |
| default 0xd4018000 if DEBUG_MMP_UART3 |
| default 0xe0000000 if ARCH_SPEAR13XX |
| default 0xf0000be0 if ARCH_EBSA110 |
| default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE |
| default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ |
| ARCH_ORION5X |
| default 0xf8b00000 if DEBUG_HI3716_UART |
| default 0xfcb00000 if DEBUG_HI3620_UART |
| default 0xfe800000 if ARCH_IOP32X |
| default 0xffc02000 if DEBUG_SOCFPGA_UART |
| default 0xffd82340 if ARCH_IOP13XX |
| default 0xfff36000 if DEBUG_HIGHBANK_UART |
| default 0xfffff700 if ARCH_IOP33X |
| depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ |
| DEBUG_LL_UART_EFM32 || \ |
| DEBUG_UART_8250 || DEBUG_UART_PL01X |
| |
| config DEBUG_UART_VIRT |
| hex "Virtual base address of debug UART" |
| default 0xe0010fe0 if ARCH_RPC |
| default 0xf0000be0 if ARCH_EBSA110 |
| default 0xf0009000 if DEBUG_CNS3XXX |
| default 0xf01fb000 if DEBUG_NOMADIK_UART |
| default 0xf0201000 if DEBUG_BCM2835 |
| default 0xf11f1000 if ARCH_VERSATILE |
| default 0xf1600000 if ARCH_INTEGRATOR |
| default 0xf1c28000 if DEBUG_SUNXI_UART0 |
| default 0xf1c28400 if DEBUG_SUNXI_UART1 |
| default 0xf2100000 if DEBUG_PXA_UART1 |
| default 0xf4090000 if ARCH_LPC32XX |
| default 0xf4200000 if ARCH_GEMINI |
| default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 |
| default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 |
| default 0xfb009000 if DEBUG_REALVIEW_STD_PORT |
| default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT |
| default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX |
| default 0xfd000000 if ARCH_SPEAR13XX |
| default 0xfd012000 if ARCH_MV78XX0 |
| default 0xfde12000 if ARCH_DOVE |
| default 0xfe012000 if ARCH_ORION5X |
| default 0xfe017000 if DEBUG_MMP_UART2 |
| default 0xfe018000 if DEBUG_MMP_UART3 |
| default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART |
| default 0xfe230000 if DEBUG_PICOXCELL_UART |
| default 0xfe800000 if ARCH_IOP32X |
| default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART |
| default 0xfeb24000 if DEBUG_RK3X_UART0 |
| default 0xfeb26000 if DEBUG_RK3X_UART1 |
| default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 |
| default 0xfeb31000 if DEBUG_KEYSTONE_UART1 |
| default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE |
| default 0xfed60000 if DEBUG_RK29_UART0 |
| default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 |
| default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 |
| default 0xfec02000 if DEBUG_SOCFPGA_UART |
| default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 |
| default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 |
| default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 |
| default 0xfed12000 if ARCH_KIRKWOOD |
| default 0xfedc0000 if ARCH_EP93XX |
| default 0xfee003f8 if FOOTBRIDGE |
| default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1 |
| default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART |
| default 0xfef36000 if DEBUG_HIGHBANK_UART |
| default 0xfee82340 if ARCH_IOP13XX |
| default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN |
| default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN |
| default 0xfefff700 if ARCH_IOP33X |
| default 0xff003000 if DEBUG_U300_UART |
| default DEBUG_UART_PHYS if !MMU |
| depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ |
| DEBUG_UART_8250 || DEBUG_UART_PL01X |
| |
| config DEBUG_UART_8250_SHIFT |
| int "Register offset shift for the 8250 debug UART" |
| depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 |
| default 0 if FOOTBRIDGE || ARCH_IOP32X |
| default 2 |
| |
| config DEBUG_UART_8250_WORD |
| bool "Use 32-bit accesses for 8250 UART" |
| depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 |
| depends on DEBUG_UART_8250_SHIFT >= 2 |
| default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ |
| ARCH_KEYSTONE || \ |
| DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ |
| DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 |
| |
| config DEBUG_UART_8250_FLOW_CONTROL |
| bool "Enable flow control for 8250 UART" |
| depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 |
| default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC |
| |
| config DEBUG_UNCOMPRESS |
| bool |
| depends on ARCH_MULTIPLATFORM || ARCH_MSM |
| default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ |
| (!DEBUG_TEGRA_UART || !ZBOOT_ROM) |
| help |
| This option influences the normal decompressor output for |
| multiplatform kernels. Normally, multiplatform kernels disable |
| decompressor output because it is not possible to know where to |
| send the decompressor output. |
| |
| When this option is set, the selected DEBUG_LL output method |
| will be re-used for normal decompressor output on multiplatform |
| kernels. |
| |
| |
| config UNCOMPRESS_INCLUDE |
| string |
| default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM |
| default "mach/uncompress.h" |
| |
| config EARLY_PRINTK |
| bool "Early printk" |
| depends on DEBUG_LL |
| help |
| Say Y here if you want to have an early console using the |
| kernel low-level debugging functions. Add earlyprintk to your |
| kernel parameters to enable this console. |
| |
| config OC_ETM |
| bool "On-chip ETM and ETB" |
| depends on ARM_AMBA |
| help |
| Enables the on-chip embedded trace macrocell and embedded trace |
| buffer driver that will allow you to collect traces of the |
| kernel code. |
| |
| config ARM_KPROBES_TEST |
| tristate "Kprobes test module" |
| depends on KPROBES && MODULES |
| help |
| Perform tests of kprobes API and instruction set simulation. |
| |
| config PID_IN_CONTEXTIDR |
| bool "Write the current PID to the CONTEXTIDR register" |
| depends on CPU_COPY_V6 |
| help |
| Enabling this option causes the kernel to write the current PID to |
| the PROCID field of the CONTEXTIDR register, at the expense of some |
| additional instructions during context switch. Say Y here only if you |
| are planning to use hardware trace tools with this kernel. |
| |
| config DEBUG_SET_MODULE_RONX |
| bool "Set loadable kernel module data as NX and text as RO" |
| depends on MODULES |
| ---help--- |
| This option helps catch unintended modifications to loadable |
| kernel module's text and read-only data. It also prevents execution |
| of module data. Such protection may interfere with run-time code |
| patching and dynamic kernel tracing - and they might also protect |
| against certain classes of kernel exploits. |
| If in doubt, say "N". |
| |
| endmenu |